This paper introduces an isolated reversible DC-DC converter with a particular topology, which benefits from both the NPC （neutral point clamped） structure and the series-parallel connection of converters. The key p...This paper introduces an isolated reversible DC-DC converter with a particular topology, which benefits from both the NPC （neutral point clamped） structure and the series-parallel connection of converters. The key property of the proposed topology is the output voltage elevation above the blocking capabilities of each switch, without taking to a delicate synchronization of series-connected semiconductors. The converter is composed by two identical cells, each containing a full bridge, a medium frequency transformer and an NPC converter, connected in parallel at the input and in series at the output. The operation principle of each cell, into which a trapezoidal modulation was implemented, is similar to a DAB （dual active bridge）. A new model improves the dynamic performance of the controller. Simulation and experimental results verify the proposed topology, its control and start-up strategy.展开更多
This paper presents and investigates planar and coaxial high frequency power transformers used for DC/DC converters in a three phase photo voltaic （PV） power systems. The winding structure including a Faraday shield...This paper presents and investigates planar and coaxial high frequency power transformers used for DC/DC converters in a three phase photo voltaic （PV） power systems. The winding structure including a Faraday shield between the primary and secondary windings is designed to minimize eddy current losses, skin and proximity effects, and to reduce the leakage inductance, and the inter winding coupling capacitance. Finite Element Method is employed to analyze the magnetic flux and eddy current distributions. The two different kinds of prototype high frequency transformers are designed and tested. The simulation and experiment results are demonstrated and compared with non-shielded transformers. The shielded transformers have achieved the expected results with a relatively small coupling capacitance, compared with the conventional high frequency transformer. This shield decreases the inter-winding coupling capacitance Cps. The topology of this shield has to be such that it acts as a Faraday screen while avoiding eddy current generation.展开更多
Conventional droop control in multi-parallel grid-forming inverters exhibits poor reactive power sharing accuracy due to line impedance mismatches.In this study,we proposed a coordination control strategy integrating ...Conventional droop control in multi-parallel grid-forming inverters exhibits poor reactive power sharing accuracy due to line impedance mismatches.In this study,we proposed a coordination control strategy integrating adaptive virtual impedance with dynamic Q-V droop regulation to overcome this issue.We established a coupling model between the line impedance and power allocation to determine the quantitative relationship between reactive power deviation and impedance difference and to analyze the mechanism of reactive power deviation formation.Based on this,we proposed a transformer neural network-based online identification method for adaptive virtual impedance and dynamic droop coefficients.The self-attention mechanism dynamically characterizes the spatial distribution features of the impedance parameters considering the real-time voltage/reactive power time-series data as inputs to realize the dynamic impedance compensation without communication interaction.The contradiction constraint between the voltage drop and distribution accuracy caused by the introduction of conventional virtual impedance is improved by dynamic droop coefficient reconstruction.Lastly,we established a hardware-in-the-loop simulation platform to experimentally validate the operational efficacy and dynamic performance of the proposed control strategy under various grid scenarios.展开更多
The rapid development of new energy power generation technology and the transformation of power electronics in the core equipment of source-grid-load drives the power system towards the“double-high”development patte...The rapid development of new energy power generation technology and the transformation of power electronics in the core equipment of source-grid-load drives the power system towards the“double-high”development pattern of“high proportion of renewable energy”and“high proportion of power electronic equipment”.To enhance the transient performance of AC/DC hybrid microgrid(HMG)in the context of“double-high,”aπtype virtual synchronous generator(π-VSG)control strategy is applied to bidirectional interface converter(BIC)to address the issues of lacking inertia and poor disturbance immunity caused by the high penetration rate of power electronic equipment and new energy.Firstly,the virtual synchronous generator mechanical motion equations and virtual capacitance equations are used to introduce the virtual inertia control equations that consider the transient performance of HMG;based on the equations,theπ-type equivalent control model of the BIC is established.Next,the inertia power is actively transferred through the BIC according to the load fluctuation to compensate for the system’s inertia deficit.Secondly,theπ-VSG control utilizes small-signal analysis to investigate howthe fundamental parameters affect the overall stability of the HMG and incorporates power step response curves to reveal the relationship between the control’s virtual parameters and transient performance.Finally,the PSCAD/EMTDC simulation results show that theπ-VSG control effectively improves the immunity of AC frequency and DC voltage in the HMG system under the load fluctuation condition,increases the stability of the HMG system and satisfies the power-sharing control objective between the AC and DC subgrids.展开更多
Moisture-enabled electricity generation(MEG)has emerged as a promising sustainable energy harvesting technology,comparable to photovoltaics,thermoelectrics,and triboelectrics[1].MEGs generate electricity by converting...Moisture-enabled electricity generation(MEG)has emerged as a promising sustainable energy harvesting technology,comparable to photovoltaics,thermoelectrics,and triboelectrics[1].MEGs generate electricity by converting the chemical potential of moisture into electric energy through interactions with hygroscopic materials and nanostructured interfaces.Unlike solar or thermal harvesters,MEGs operate continuously by utilizing ubiquitous atmospheric moisture,granting them unique spatial and temporal adaptability.Despite nearly a decade of progress and the exploration of diverse material systems for MEG,the overall output power remains significantly limited due to inherently low charge carrier concentrations and restricted ion diffusion fluxes[2].As a result,standalone MEG devices often deliver low and unstable output,limiting practical applications.To enhance performance and versatility,recent efforts have explored hybridization of MEG with other ambient energy sources such as triboelectric or thermoelectric effects.展开更多
A novel approach based on the quantitative phase field model was proposed to calculate the interface mobility and applied to the α/β interface of a ternary Ti-6Al-4V alloy.Phase field simulations indicate that the h...A novel approach based on the quantitative phase field model was proposed to calculate the interface mobility and applied to the α/β interface of a ternary Ti-6Al-4V alloy.Phase field simulations indicate that the higher interface mobility leads to the faster transformation rate,but only a unique value of interface mobility matches the diffusion equation under the diffusion-controlled condition.By comparing the transformation kinetics from phase field simulations with that from classical diffusion equation,the interface mobility at different temperatures can be obtained.The results show that the calculated interface mobility increases with increasing temperature and accords with Arrhenius equation very well.展开更多
By combining the α/γ interface migration and the carbon diffusion at the interface in Fe-C alloys, a mathematical model is constructed to describe the mixed-control mechanism for proeutectoid ferrite formation from ...By combining the α/γ interface migration and the carbon diffusion at the interface in Fe-C alloys, a mathematical model is constructed to describe the mixed-control mechanism for proeutectoid ferrite formation from austenite. In this model, the α/γ interface is treated as non-equilibrium interface, i.e., the carbon concentration of austenite at γ/α interface is obtained through theoretical calculation, instead of that assumed as the local equilibrium concentration. For isothermal precipitation of ferrite in Fe-C alloys, the calculated results show that the rate of interface migration decreases monotonically during the whole process, while the rate of carbon diffusion from γ/α interface into austenite increases to a peak value and then decreases. The process of ferrite growth may be considered as composed of three stages: the period of rapid growth, slow growth and finishing stage. The results also show that the carbon concentration of austenite at γ/α interface could not reach the thermodynamic equilibrium value even at the last stage of ferrite growth.展开更多
The influences of additives on the phase transformation, occurrence state, and the interface of the Ti component in Ti-bearing blast furnace slag were investigated. After oxidation, most of the Ti component in the sla...The influences of additives on the phase transformation, occurrence state, and the interface of the Ti component in Ti-bearing blast furnace slag were investigated. After oxidation, most of the Ti component in the slag was enriched into the perovskite phase, which served as the Ti-rich phase during the crystallization process. The phase transformation, occurrence state, and the interface of the Ti component were observed to be affected by the addition of different types of agents. During the oxidation process, titanaugite and Ti-rich diopside phases gradually transformed into non-Ti phases（anorthite： CaMgSi2O6 and CaAl2Si2O8） in the form of dendrites or columns, which were observed to be distributed at the surface of the perovskite phase. Several more cracks appeared along the grain boundaries of the perovskite phase after the addition of P2O5, facilitating the liberation of the perovskite phase. Composite additives combining both an acid and a base, such as CaO ＋ CaF2 or P2O5 ＋ CaF2, were used. We observed that the disadvantages of using single additives were successfully overcome.展开更多
Based on the microscopic phase-field model, the structure and migration characteristic of ordered domain interfaces formed between DO22 and L12 phase are investigated, and the atomistic mechanism of phase transformati...Based on the microscopic phase-field model, the structure and migration characteristic of ordered domain interfaces formed between DO22 and L12 phase are investigated, and the atomistic mechanism of phase transformation from L12 （Ni3Al） to DO22 （Ni3V） in Ni75AlxV25-x alloys are explored, using the simulated microstructure evolution pictures and the occupation probability evolution of alloy elements at the interface. The results show that five kinds of heterointerfaces are formed between DO22 and L12 phase and four of them can migrate during the phase transformation from L12 to DO22 except the interface （002）D//（001）L. The structure of interface （100）D//（200）L and interface （100）D//（200）L·^1/2[001] remain the same before and after migration, while the interface （002）D//（002）L is formed after the migration of interface （002）D//（002）L·^1/2[100] and vice versa. These two kinds of interface appear alternatively. The jump and substitute of atoms selects the optimization way to induce the migration of interface during the phase transformation, and the number of atoms needing to jump during the migration is the least among all of the possible atom jump modes.展开更多
A model on the coexisting phase of quasicrystal-crystal is proposed, with which we concretely investigate the inter- face effects for coexisting phases of one-dimensional orthorhombic quasicrystal-isotropic crystal an...A model on the coexisting phase of quasicrystal-crystal is proposed, with which we concretely investigate the inter- face effects for coexisting phases of one-dimensional orthorhombic quasicrystal-isotropic crystal and three-dimensional icosahedral quasierystal-cubic crystal. The phason strain fields which play an important role in some processes are determined. Some factors affecting the strain fields, e.g., the material constants of phonon, phason, phonon-phason coupling of the quasicrystal and the elastic modulus and the size of the crystal are also explored.展开更多
The scattering of general SH plane wave by an interface crack between two dissimilar viscoelastic bodies is studied and the dynamic stress intensity factor at the crack-tip is computed. The scattering problem can be d...The scattering of general SH plane wave by an interface crack between two dissimilar viscoelastic bodies is studied and the dynamic stress intensity factor at the crack-tip is computed. The scattering problem can be decomposed into two problems: one is the reflection and refraction problem of general SH plane waves at perfect interface (with no crack); another is the scattering problem due to the existence of crack. For the first problem, the viscoelastic wave equation, displacement and stress continuity conditions across the interface are used to obtain the shear stress distribution at the interface. For the second problem, the integral transformation method is used to reduce the scattering problem into dual integral equations. Then, the dual integral equations are transformed into the Cauchy singular integral equation of first kind by introduction of the crack dislocation density function. Finally, the singular integral equation is solved by Kurtz's piecewise continuous function method. As a consequence, the crack opening displacement and dynamic stress intensity factor are obtained. At the end of the paper, a numerical example is given. The effects of incident angle, incident frequency and viscoelastic material parameters are analyzed. It is found that there is a frequency region for viscoelastic material within which the viscoelastic effects cannot be ignored.展开更多
There are some curved interfaces in ocean acoustic waveguides. To compute wave propagation along the range with some marching methods, a flattening of the internal interfaces and a transforming equation are needed. In...There are some curved interfaces in ocean acoustic waveguides. To compute wave propagation along the range with some marching methods, a flattening of the internal interfaces and a transforming equation are needed. In this paper a local orthogonal coordinate transform and an equation transformation are constructed to flatten interfaces and change the Helmholtz equation as a solvable form. For a waveguide with a flat top, a fiat bottom and n curved interfaces, the coefficients of the transformed Helmholtz equation are given in a closed formulation which can be thought of as an extension of the formal work related to the equation transformation with two curved internal interfaces. In the transformed horizontally stratified waveguide, the one-way reformulation based on the Dirichlet-to-Neumann （DtN） map is then used to reduce the boundary value problem to an initial value problem. Numerical implementation of the resulting operator Riccati equation uses a large range step method to discretize the range variable and a truncated local eigenfunction expansion to approximate the operators. This method is particularly useful for solving long range wave propagation problems in slowly varying waveguides. Furthermore, the method can also be applied to wave propagation problems in acoustic waveguides associated with varied density.展开更多
The line side winding is under the fundamental frequency AC voltage, while the valve side winding contains not only fundamental AC voltage component, but also the DC voltage component, fundamental AC voltage component...The line side winding is under the fundamental frequency AC voltage, while the valve side winding contains not only fundamental AC voltage component, but also the DC voltage component, fundamental AC voltage component, and higher harmonic voltage components when the converter transformer is at its normal operating condition, and the electric field of converter transformer is a non-sinusoidal steady one. To analyze the non-sinusoidal steady electric field containing the DC component, fundamental AC and higher harmonic components, the voltage spectrum of the valve winding in a ±500 kV converter transformer is firstly analyzed, and the non-sinusoidal periodic steady electric field is obtained by the fast discrete Fourier transform. Different resistivity of the oil and oil-immersed paper is adopted to simulate the aging of oil paper insulation at operation, and get the non-sinusoidal steady electric field.展开更多
The present work is concerned with the problem of mode Ⅲ crack perpendicular to the interface of a bi-strip composite. One of these strips is made of a functionally graded material and the other of an isotropic mater...The present work is concerned with the problem of mode Ⅲ crack perpendicular to the interface of a bi-strip composite. One of these strips is made of a functionally graded material and the other of an isotropic material, which contains an edge crack perpendicular to and terminating at the interface. Fourier transforms and asymptotic analysis are employed to reduce the problem to a singular integral equation which is numerically solved using Gauss-Chebyshev quadrature formulae. Furthermore, a parametric study is carried out to investigate the effects of elastic and geometric characteristics of the composite on the values of stress intensity factor.展开更多
This paper studies the problem of deriving an interface automata model from UML statechart, in which, interface automata is a formaliged model for describing component behavior in an open system, but there is no unive...This paper studies the problem of deriving an interface automata model from UML statechart, in which, interface automata is a formaliged model for describing component behavior in an open system, but there is no universal criterion for deriving behavior from component to construct the model. UML is a widely used modeling standard, yet it is very difficult to apply it to system verification and testing directly for its imprecise semantics. After analyzing the expression ability of the two models, several transforma- tion rules are defined and each step of transformation is described in detail, after that, the approach is illustrated with an example. The paper provides a method for acquiring interface automata and lays the foundation for related research.展开更多
DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of c...DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of complex converter networks gets complicated.Because the reference frames of different converters might not fully align,depending on the structure.Thus,in order to find an accurate impedance model of a complex network for stability analysis,converting the impedances of different converters into a common reference frame is required.This paper presents a comprehensive investigation on the transformation of dq impedances to a common reference frame in complex converter networks.Four different methods are introduced and analyzed in a systematic way.Moreover,a rigorous comparison among these approaches is carried out,where the method with the simplest transformation procedure is finally suggested for the modeling of complex converter networks.The performed analysis is verified by injecting two independent small-signal perturbations into the d and the q axis,and doing a point-by-point impedance measurement.展开更多
Solid state transformer(SST)can provide more advanced functionalities compared with conventional transformer,and has great potential in smart grid application.Recently,the SST with medium frequency(MF)isolation link a...Solid state transformer(SST)can provide more advanced functionalities compared with conventional transformer,and has great potential in smart grid application.Recently,the SST with medium frequency(MF)isolation link and magnetic integration feature has been proposed,which can reduce the system volume and thus increase the power density.However,the magnetic integration also introduces strong coupling between the line frequency(LF)and MF variables,which poses a great challenge on modeling and control issues.This paper proposes a modeling and control method for an SST with magnetic integration and mixed-frequency modulation.A mathematical model based on dual d-q references is deduced,and then a cascaded control system is designed according to the model.Parameters of the controller for the variables at one frequency are properly designed to avoid disturbance from the variables at the other frequency.The simulation and experimental results show good decoupling effect and satisfactory dynamics performance of the proposed control system.展开更多
The problem of an anti-plane Griffith crack moving along the interface of dissimilar piezoelectric materials is solved by using the integral transform technique. It is shown from the result that the intensity factors ...The problem of an anti-plane Griffith crack moving along the interface of dissimilar piezoelectric materials is solved by using the integral transform technique. It is shown from the result that the intensity factors of anti-plane stress and electric displacement around the crack tip are dependent on the speed of the Griffith crack as well as the material coefficients. When the two piezoelectric materials are identical, the present result will be reduced to the result far the problem of an anti-plane moving Griffith crack in homogeneous piezoelectric materials.展开更多
文摘This paper introduces an isolated reversible DC-DC converter with a particular topology, which benefits from both the NPC （neutral point clamped） structure and the series-parallel connection of converters. The key property of the proposed topology is the output voltage elevation above the blocking capabilities of each switch, without taking to a delicate synchronization of series-connected semiconductors. The converter is composed by two identical cells, each containing a full bridge, a medium frequency transformer and an NPC converter, connected in parallel at the input and in series at the output. The operation principle of each cell, into which a trapezoidal modulation was implemented, is similar to a DAB （dual active bridge）. A new model improves the dynamic performance of the controller. Simulation and experimental results verify the proposed topology, its control and start-up strategy.
文摘This paper presents and investigates planar and coaxial high frequency power transformers used for DC/DC converters in a three phase photo voltaic （PV） power systems. The winding structure including a Faraday shield between the primary and secondary windings is designed to minimize eddy current losses, skin and proximity effects, and to reduce the leakage inductance, and the inter winding coupling capacitance. Finite Element Method is employed to analyze the magnetic flux and eddy current distributions. The two different kinds of prototype high frequency transformers are designed and tested. The simulation and experiment results are demonstrated and compared with non-shielded transformers. The shielded transformers have achieved the expected results with a relatively small coupling capacitance, compared with the conventional high frequency transformer. This shield decreases the inter-winding coupling capacitance Cps. The topology of this shield has to be such that it acts as a Faraday screen while avoiding eddy current generation.
基金supported by the National Natural Science Foundation of China(No.62063016)the Science and Technology Plan of Gansu Province(No.25JRRA088).
文摘Conventional droop control in multi-parallel grid-forming inverters exhibits poor reactive power sharing accuracy due to line impedance mismatches.In this study,we proposed a coordination control strategy integrating adaptive virtual impedance with dynamic Q-V droop regulation to overcome this issue.We established a coupling model between the line impedance and power allocation to determine the quantitative relationship between reactive power deviation and impedance difference and to analyze the mechanism of reactive power deviation formation.Based on this,we proposed a transformer neural network-based online identification method for adaptive virtual impedance and dynamic droop coefficients.The self-attention mechanism dynamically characterizes the spatial distribution features of the impedance parameters considering the real-time voltage/reactive power time-series data as inputs to realize the dynamic impedance compensation without communication interaction.The contradiction constraint between the voltage drop and distribution accuracy caused by the introduction of conventional virtual impedance is improved by dynamic droop coefficient reconstruction.Lastly,we established a hardware-in-the-loop simulation platform to experimentally validate the operational efficacy and dynamic performance of the proposed control strategy under various grid scenarios.
基金funded by“The Fourth Phase of 2022 Advantage Discipline Engineering-Control Science and Engineering”,grant number 4013000063.
文摘The rapid development of new energy power generation technology and the transformation of power electronics in the core equipment of source-grid-load drives the power system towards the“double-high”development pattern of“high proportion of renewable energy”and“high proportion of power electronic equipment”.To enhance the transient performance of AC/DC hybrid microgrid(HMG)in the context of“double-high,”aπtype virtual synchronous generator(π-VSG)control strategy is applied to bidirectional interface converter(BIC)to address the issues of lacking inertia and poor disturbance immunity caused by the high penetration rate of power electronic equipment and new energy.Firstly,the virtual synchronous generator mechanical motion equations and virtual capacitance equations are used to introduce the virtual inertia control equations that consider the transient performance of HMG;based on the equations,theπ-type equivalent control model of the BIC is established.Next,the inertia power is actively transferred through the BIC according to the load fluctuation to compensate for the system’s inertia deficit.Secondly,theπ-VSG control utilizes small-signal analysis to investigate howthe fundamental parameters affect the overall stability of the HMG and incorporates power step response curves to reveal the relationship between the control’s virtual parameters and transient performance.Finally,the PSCAD/EMTDC simulation results show that theπ-VSG control effectively improves the immunity of AC frequency and DC voltage in the HMG system under the load fluctuation condition,increases the stability of the HMG system and satisfies the power-sharing control objective between the AC and DC subgrids.
基金the financial support of the National Natural Science Foundation of China(No.22205165).
文摘Moisture-enabled electricity generation(MEG)has emerged as a promising sustainable energy harvesting technology,comparable to photovoltaics,thermoelectrics,and triboelectrics[1].MEGs generate electricity by converting the chemical potential of moisture into electric energy through interactions with hygroscopic materials and nanostructured interfaces.Unlike solar or thermal harvesters,MEGs operate continuously by utilizing ubiquitous atmospheric moisture,granting them unique spatial and temporal adaptability.Despite nearly a decade of progress and the exploration of diverse material systems for MEG,the overall output power remains significantly limited due to inherently low charge carrier concentrations and restricted ion diffusion fluxes[2].As a result,standalone MEG devices often deliver low and unstable output,limiting practical applications.To enhance performance and versatility,recent efforts have explored hybridization of MEG with other ambient energy sources such as triboelectric or thermoelectric effects.
基金Project (51101059) supported by the National Natural Science Foundation of ChinaProject (20110490874) supported by the China Postdoctoral Science Foundation
文摘A novel approach based on the quantitative phase field model was proposed to calculate the interface mobility and applied to the α/β interface of a ternary Ti-6Al-4V alloy.Phase field simulations indicate that the higher interface mobility leads to the faster transformation rate,but only a unique value of interface mobility matches the diffusion equation under the diffusion-controlled condition.By comparing the transformation kinetics from phase field simulations with that from classical diffusion equation,the interface mobility at different temperatures can be obtained.The results show that the calculated interface mobility increases with increasing temperature and accords with Arrhenius equation very well.
基金This work was supported by the National Natural Science Foundation of China under grant No.50075053the Emphasized Item of Development Funds of Science and Technology of Shanghai City,China(No.03H201).
文摘By combining the α/γ interface migration and the carbon diffusion at the interface in Fe-C alloys, a mathematical model is constructed to describe the mixed-control mechanism for proeutectoid ferrite formation from austenite. In this model, the α/γ interface is treated as non-equilibrium interface, i.e., the carbon concentration of austenite at γ/α interface is obtained through theoretical calculation, instead of that assumed as the local equilibrium concentration. For isothermal precipitation of ferrite in Fe-C alloys, the calculated results show that the rate of interface migration decreases monotonically during the whole process, while the rate of carbon diffusion from γ/α interface into austenite increases to a peak value and then decreases. The process of ferrite growth may be considered as composed of three stages: the period of rapid growth, slow growth and finishing stage. The results also show that the carbon concentration of austenite at γ/α interface could not reach the thermodynamic equilibrium value even at the last stage of ferrite growth.
基金supported by the Open Research Fund of the Key Laboratory for Ferrous Metallurgy and Resources Utilization of the Ministry of EducationWuhan University of Science and Technology (FMRU2007K10)
文摘The influences of additives on the phase transformation, occurrence state, and the interface of the Ti component in Ti-bearing blast furnace slag were investigated. After oxidation, most of the Ti component in the slag was enriched into the perovskite phase, which served as the Ti-rich phase during the crystallization process. The phase transformation, occurrence state, and the interface of the Ti component were observed to be affected by the addition of different types of agents. During the oxidation process, titanaugite and Ti-rich diopside phases gradually transformed into non-Ti phases（anorthite： CaMgSi2O6 and CaAl2Si2O8） in the form of dendrites or columns, which were observed to be distributed at the surface of the perovskite phase. Several more cracks appeared along the grain boundaries of the perovskite phase after the addition of P2O5, facilitating the liberation of the perovskite phase. Composite additives combining both an acid and a base, such as CaO ＋ CaF2 or P2O5 ＋ CaF2, were used. We observed that the disadvantages of using single additives were successfully overcome.
基金Funded by the National Natural Science Foundation of China (Nos.50941020, 10902086, 50875217, and 20903075)Natural Science Foundation of Shaanxi Province (Nos. SJ08-ZT05 and SJ08-B14)Doctorate Foundation of Northwest Polytechnical University (No. CX200905)
文摘Based on the microscopic phase-field model, the structure and migration characteristic of ordered domain interfaces formed between DO22 and L12 phase are investigated, and the atomistic mechanism of phase transformation from L12 （Ni3Al） to DO22 （Ni3V） in Ni75AlxV25-x alloys are explored, using the simulated microstructure evolution pictures and the occupation probability evolution of alloy elements at the interface. The results show that five kinds of heterointerfaces are formed between DO22 and L12 phase and four of them can migrate during the phase transformation from L12 to DO22 except the interface （002）D//（001）L. The structure of interface （100）D//（200）L and interface （100）D//（200）L·^1/2[001] remain the same before and after migration, while the interface （002）D//（002）L is formed after the migration of interface （002）D//（002）L·^1/2[100] and vice versa. These two kinds of interface appear alternatively. The jump and substitute of atoms selects the optimization way to induce the migration of interface during the phase transformation, and the number of atoms needing to jump during the migration is the least among all of the possible atom jump modes.
基金Project supported by the National Natural Science Foundation of China (Grant No.10672022)
文摘A model on the coexisting phase of quasicrystal-crystal is proposed, with which we concretely investigate the inter- face effects for coexisting phases of one-dimensional orthorhombic quasicrystal-isotropic crystal and three-dimensional icosahedral quasierystal-cubic crystal. The phason strain fields which play an important role in some processes are determined. Some factors affecting the strain fields, e.g., the material constants of phonon, phason, phonon-phason coupling of the quasicrystal and the elastic modulus and the size of the crystal are also explored.
基金This work was supported by the National Natural Science Foundation of China(No.19772064)by the project of CAS KJ 951-1-20
文摘The scattering of general SH plane wave by an interface crack between two dissimilar viscoelastic bodies is studied and the dynamic stress intensity factor at the crack-tip is computed. The scattering problem can be decomposed into two problems: one is the reflection and refraction problem of general SH plane waves at perfect interface (with no crack); another is the scattering problem due to the existence of crack. For the first problem, the viscoelastic wave equation, displacement and stress continuity conditions across the interface are used to obtain the shear stress distribution at the interface. For the second problem, the integral transformation method is used to reduce the scattering problem into dual integral equations. Then, the dual integral equations are transformed into the Cauchy singular integral equation of first kind by introduction of the crack dislocation density function. Finally, the singular integral equation is solved by Kurtz's piecewise continuous function method. As a consequence, the crack opening displacement and dynamic stress intensity factor are obtained. At the end of the paper, a numerical example is given. The effects of incident angle, incident frequency and viscoelastic material parameters are analyzed. It is found that there is a frequency region for viscoelastic material within which the viscoelastic effects cannot be ignored.
基金the National Natural Science Foundation of China (No. 10571162)the Natural Science Foundation of Zheji-ang Province, China (No. Y605181)
文摘There are some curved interfaces in ocean acoustic waveguides. To compute wave propagation along the range with some marching methods, a flattening of the internal interfaces and a transforming equation are needed. In this paper a local orthogonal coordinate transform and an equation transformation are constructed to flatten interfaces and change the Helmholtz equation as a solvable form. For a waveguide with a flat top, a fiat bottom and n curved interfaces, the coefficients of the transformed Helmholtz equation are given in a closed formulation which can be thought of as an extension of the formal work related to the equation transformation with two curved internal interfaces. In the transformed horizontally stratified waveguide, the one-way reformulation based on the Dirichlet-to-Neumann （DtN） map is then used to reduce the boundary value problem to an initial value problem. Numerical implementation of the resulting operator Riccati equation uses a large range step method to discretize the range variable and a truncated local eigenfunction expansion to approximate the operators. This method is particularly useful for solving long range wave propagation problems in slowly varying waveguides. Furthermore, the method can also be applied to wave propagation problems in acoustic waveguides associated with varied density.
文摘The line side winding is under the fundamental frequency AC voltage, while the valve side winding contains not only fundamental AC voltage component, but also the DC voltage component, fundamental AC voltage component, and higher harmonic voltage components when the converter transformer is at its normal operating condition, and the electric field of converter transformer is a non-sinusoidal steady one. To analyze the non-sinusoidal steady electric field containing the DC component, fundamental AC and higher harmonic components, the voltage spectrum of the valve winding in a ±500 kV converter transformer is firstly analyzed, and the non-sinusoidal periodic steady electric field is obtained by the fast discrete Fourier transform. Different resistivity of the oil and oil-immersed paper is adopted to simulate the aging of oil paper insulation at operation, and get the non-sinusoidal steady electric field.
文摘The present work is concerned with the problem of mode Ⅲ crack perpendicular to the interface of a bi-strip composite. One of these strips is made of a functionally graded material and the other of an isotropic material, which contains an edge crack perpendicular to and terminating at the interface. Fourier transforms and asymptotic analysis are employed to reduce the problem to a singular integral equation which is numerically solved using Gauss-Chebyshev quadrature formulae. Furthermore, a parametric study is carried out to investigate the effects of elastic and geometric characteristics of the composite on the values of stress intensity factor.
文摘This paper studies the problem of deriving an interface automata model from UML statechart, in which, interface automata is a formaliged model for describing component behavior in an open system, but there is no universal criterion for deriving behavior from component to construct the model. UML is a widely used modeling standard, yet it is very difficult to apply it to system verification and testing directly for its imprecise semantics. After analyzing the expression ability of the two models, several transforma- tion rules are defined and each step of transformation is described in detail, after that, the approach is illustrated with an example. The paper provides a method for acquiring interface automata and lays the foundation for related research.
基金The support of the first and fourth authors is given by National Key R&D Program of China,2018YFB0905200.The support for the second and third authors is coming from BIRD171227/17 project of the University of Padova.
文摘DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of complex converter networks gets complicated.Because the reference frames of different converters might not fully align,depending on the structure.Thus,in order to find an accurate impedance model of a complex network for stability analysis,converting the impedances of different converters into a common reference frame is required.This paper presents a comprehensive investigation on the transformation of dq impedances to a common reference frame in complex converter networks.Four different methods are introduced and analyzed in a systematic way.Moreover,a rigorous comparison among these approaches is carried out,where the method with the simplest transformation procedure is finally suggested for the modeling of complex converter networks.The performed analysis is verified by injecting two independent small-signal perturbations into the d and the q axis,and doing a point-by-point impedance measurement.
基金the National Natural Science Foundation of China under Grant 51777085.
文摘Solid state transformer(SST)can provide more advanced functionalities compared with conventional transformer,and has great potential in smart grid application.Recently,the SST with medium frequency(MF)isolation link and magnetic integration feature has been proposed,which can reduce the system volume and thus increase the power density.However,the magnetic integration also introduces strong coupling between the line frequency(LF)and MF variables,which poses a great challenge on modeling and control issues.This paper proposes a modeling and control method for an SST with magnetic integration and mixed-frequency modulation.A mathematical model based on dual d-q references is deduced,and then a cascaded control system is designed according to the model.Parameters of the controller for the variables at one frequency are properly designed to avoid disturbance from the variables at the other frequency.The simulation and experimental results show good decoupling effect and satisfactory dynamics performance of the proposed control system.
基金the National Natural Science Foundationthe National Post-doctoral Science Foundation of China
文摘The problem of an anti-plane Griffith crack moving along the interface of dissimilar piezoelectric materials is solved by using the integral transform technique. It is shown from the result that the intensity factors of anti-plane stress and electric displacement around the crack tip are dependent on the speed of the Griffith crack as well as the material coefficients. When the two piezoelectric materials are identical, the present result will be reduced to the result far the problem of an anti-plane moving Griffith crack in homogeneous piezoelectric materials.
