The density of traffic in Bohai Sea of China is growing,so the evaluation of the impact of potential oil spills becomes necessary.However,the impact of potential oil spills at a large temporal-spatial scale has seldom...The density of traffic in Bohai Sea of China is growing,so the evaluation of the impact of potential oil spills becomes necessary.However,the impact of potential oil spills at a large temporal-spatial scale has seldom been studied.In this paper,the effects of potential oil spills in seven main fairways in Chinese Bohai Sea and the risks of five environmental sensitive areas(ESAs)being polluted are studied.A three-dimensional hydrodynamic model,coupled with Lagrangian particle tracking model,was constructed to simulate the transportation of oil spills.Hypothetical oil particles with an idealized,passive tracer were released along fairways and their transportation over20-day and180-day periods were simulated,respectively.An environmental impact matrix was built to reveal the relationship between oil spills in fairways and the pollution of ESAs.Results showed that in short term,Z4and Z5had high risk of being polluted by oil spills.Oil particles released along Fairways1,2and7had strong pollution effects.In long term,Z1,Z3,Z4and Z5had medium risk of being polluted.Oil particles released along Fairway3had strong pollution effects.This study might provide useful data to support marine environment protection.展开更多
This study employed the Rapid Impact Assessment Matrix (RIAM) to prioritize the water resources management problems in the North Central Nigeria. This was done through the assessment of the status of water resources m...This study employed the Rapid Impact Assessment Matrix (RIAM) to prioritize the water resources management problems in the North Central Nigeria. This was done through the assessment of the status of water resources management in the region, evaluation of existing policy and strategy of water management, identification of the management problems and the prioritization with RIAM. The stakeholders identified water resources management problems, ranked them in other of severity in different categories and also evaluated them using the RIAM techniques in the administered questionnaire. Eleven problems were analyzed based on the physical/chemical, biological/ecological, social/cultural and economic/operational factors using several impact indicators. Scores were assigned, the RIAM models applied and the averages taken to arrive at the final assessment scores. The two major water resources management problems identified are: 1) inadequate funds for further agricultural, hydroelectric, navigation and industrial development;2) poor data collection and banking. These problems were prioritized by RIAM in order of severity for urgent intervention. The RIAM technique has made a key contribution to the prioritization of water resources management by providing insights into urgent problems according to stakeholders and thus guides the policy maker in appropriate decision making.展开更多
The status and the variation of electrical resistance of impacted carbon fiber/epoxy-matrix composites were studied by ultrasonic F-scan and electrical resistance measurement The experimental results shows that impact...The status and the variation of electrical resistance of impacted carbon fiber/epoxy-matrix composites were studied by ultrasonic F-scan and electrical resistance measurement The experimental results shows that impact damage energy threshold value of carbon fabric/epoxy-matrix composites can determine by using ultrasonic F-scan. When the impact energy exceeds the threshold value, damage is generated in composites. Electrical resistance of impacted composites is changed owing to the contact of each carbon fiber unit in composites, which cause a change of the series-parallel in conductors. The veracity of detecting impact damage in composites can be improved in this case.展开更多
We calculate the electron impact excitation of Ni-like gold by using the Dirac R-matrix theory, and the cor- responding collision strengths and effective collision strengths are obtained. In the calculations of the le...We calculate the electron impact excitation of Ni-like gold by using the Dirac R-matrix theory, and the cor- responding collision strengths and effective collision strengths are obtained. In the calculations of the level energy, （1sZ2sZ2p6）3sZ3p63d10, 3s23p63d94/, 3s23p53d104/, and 3s3p63d104/（l = 0, 1,2,3） configurations are included and 107 fine-structure levels are generated. In the calculations of the collision strengths, only the first 59 levels are included. Com- parisons are made with the distorted wave （DW） results of Zeng et al. for both collision strengths and effective collision strengths. For the collision strengths, the two sets of calculations are in excellent agreement for most of the transitions. However, because of the inclusion of the resonances, our effective collision strengths are generally several times larger than those of Zeng et al.. The accuracy of our calculations is assessed.展开更多
Impact damage tolerance is provided in intensity design on composites. The compression intensity of impacted composites requires more than 60% of its original intensity. The influence of impact on compressive intensit...Impact damage tolerance is provided in intensity design on composites. The compression intensity of impacted composites requires more than 60% of its original intensity. The influence of impact on compressive intensity and electrical resistance of carbon fabric/epoxy-matrix composites was studied in this paper. The experimental results shows that impact can cause damage in composites, degenerate compressive intensity, and increase resistance. The electrical resistance change rate was used as an evaluation indicator of impact damage tolerance of composites. Impact damage, which results from the applying process of composites, can be identified in time by electrical resistance measurement. So, the safety performance of composites can also be improved.展开更多
Investigation was to study the influence of pulse-impact on microstructure of Liquid-Phase-Pulse-Impact Diffusion Welding (LPPIDW) welded joints of aluminum matrix composite SiCp/A356, SiCp/6061Al, Al2O3p/6061Al. Resu...Investigation was to study the influence of pulse-impact on microstructure of Liquid-Phase-Pulse-Impact Diffusion Welding (LPPIDW) welded joints of aluminum matrix composite SiCp/A356, SiCp/6061Al, Al2O3p/6061Al. Results showed that under the effect of pulse-impact: 1) the interface state between reinforcement particle (SiC, Al2O3) and matrix was prominently;2) the initial pernicious contact-state of reinforcement particles was changed from reinforcement (SiC, Al2O3)/reinforcement (SiC, Al2O3) to reinforcement (SiC, Al2O3)/matrix/ reinforcement (SiC, Al2O3);3) the density of dislocation in the matrix neighboring to and away from the interface in the matrix was higher than its parent composite;and 4) the intensively mutual entwisting of dislocation was occurred. Studies illustrated that: 1) deformation was mainly occurred in the matrix grain;and 2) under the effect of pulse-impact, the matrices around reinforcement (SiC, Al2O3) particles engendered intensive aberration offered a high density nucleus area for matrix crystal, which was in favor of forming nano-grains and improved the properties of the successfully welded composite joints.展开更多
Designers of infrastructure are aware that the government, owners and users become more and more concerned about negative environmental impacts of tunnels, so environmental assessment of tunnels are becoming an issue ...Designers of infrastructure are aware that the government, owners and users become more and more concerned about negative environmental impacts of tunnels, so environmental assessment of tunnels are becoming an issue in the process of tunnel design. In this study, to assess tunnels in construction and operation phases, the matrix method, through which the “Impacting Factors” and “Environmental Components” are determined, is also outlined. The affected environment was divided into thirteen components, such as Ecology, Surface water, Air quality, etc. In this paper, matrix method was applied to evaluate the impact of tunneling in three typical tunnels and compare them with standard diagrams of Environmental Components that were derived and introduced. These tunnels were: Urban Utility tunnel in Tehran, Eurasia tunnel in Istanbul and Tsuen Wan drainage tunnel in Hong Kong. Based on the acquired results, the present paper finally concluded that among three cases, Tsuen Wan drainage tunnel affects the environment in construction phase more than others, while Eurasia tunnel effects on air quality are more significant in operation phase.展开更多
Vietnam is a coastal country projected to be heavily affected by climate change.Binh Thuan Province is part of the driest region of Vietnam and is prone to desertification.An expert panel participated in developing a ...Vietnam is a coastal country projected to be heavily affected by climate change.Binh Thuan Province is part of the driest region of Vietnam and is prone to desertification.An expert panel participated in developing a Leopold matrix which allowed for identification of desertification impact factors on the province's socioeconomic activities and assessment of the strength of cause-effect relationships in terms of magnitude and importance.Land use planning,surface water,and the length of the dry season are considered the most important causes,with the overall highest scores for both magnitude and importance in the cause-effect relationship.The largest effects of the different factors are perceived on water supply for agriculture and household use.Water availability and land use planning are important remedial action domains,while drought and land cover require monitoring to assess impacts.The indicators of cause and effect can be used in a longer-term general monitoring and assessment framework to combat desertification in the area.展开更多
Wind energy is one of the most basic forms of renewable energy,which shows an increasing rate of development worldwide and also at the European level.However,this rapid deployment of wind farms makes the need for an i...Wind energy is one of the most basic forms of renewable energy,which shows an increasing rate of development worldwide and also at the European level.However,this rapid deployment of wind farms makes the need for an impact assessment of this type of projects on the natural and man-made environment imperative.The present paper aims to identify and assess the environmental impacts of wind farm projects in the Region of Central Greece.A modified Rapid Impact Assessment Matrix(RIAM)method is used for this purpose.The methodology includes the identification of the existing onshore wind farm projects in the study area,the appropriate modifications of the RIAM method to respond to the characteristics of the projects and the study area,the qualitative assessment of their potential impacts during construction and operational phases and the computation of the Environmental Performance Grade(EPG)of projects based on the pro-posed modified RIAM method.The results reveal that although there are some slight negative impacts on the natural environment of the study area,the examined wind farms contribute positively both to the atmosphere and to the socio-economic environment of the study.This study extends the potential for using RIAM as a tool in environmental impact assessment studies of renewable energy projects.展开更多
Purpose： Ramanujacharyulu developed the Power-weakness Ratio （PWR） for scoring tournaments. The PWR algorithm has been advocated （and used） for measuring the impact of journals. We show how such a newly proposed ...Purpose： Ramanujacharyulu developed the Power-weakness Ratio （PWR） for scoring tournaments. The PWR algorithm has been advocated （and used） for measuring the impact of journals. We show how such a newly proposed indicator can empirically be tested. Design/methodology/approach： PWR values can be found by recursively multiplying the citation matrix by itself until convergence is reached in both the cited and citing dimensions; the quotient of these two values is defined as PWR. We study the effectiveness of PWR using journal ecosystems drawn from the Library and Information Science （LIS） set of the Web of Science （83 journals） as an example. Pajek is used to compute PWRs for the full set, and Excel for the computation in the case of the two smaller sub-graphs： （1） JASIST＋ the seven journals that cite JASISTmore than 100 times in 2012; and （2） MIS Quart＋ the nine journals citing this journal to the same extent. Findings： A test using the set of 83 journals converged, but did not provide interpretable results. Further decomposition of this set into homogeneous sub-graphs shows that--like most other journal indicators--PWR can perhaps be used within homogeneous sets, but not across citation communities. We conclude that PWR does not work as a journal impact indicator; journal impact, for example, is not a tournament. Research limitations： Journals that are not represented on the ＂citing＂ dimension of the matrix--for example, because they no longer appear, but are still registered as ＂cited＂ （e.g. ARIST）-distort the PWR ranking because of zeros or very low values in the denominator. Practical implications： The association of＂cited＂ with ＂power＂ and ＂citing＂ with ＂weakness＂ can be considered as a metaphor. In our opinion, referencing is an actor category and can bestudied in terms of behavior, whereas ＂citedness＂ is a property of a document with an expected dynamics very different from that of＂citing.＂ From this perspective, the PWR model is not valid as a journal indicator. Originality/value： Arguments for using PWR are： （1） its symmetrical handling of the rows and columns in the asymmetrical citation matrix, （2） its recursive algorithm, and （3） its mathematical elegance. In this study, PWR is discussed and critically assessed.展开更多
This work presents the delamination resistance of woven glass fibre reinforced polymers (GFRP) and its influence on GFRP’s resistance to point impact. Two different types of laminates were fabricated by hand lay-up t...This work presents the delamination resistance of woven glass fibre reinforced polymers (GFRP) and its influence on GFRP’s resistance to point impact. Two different types of laminates were fabricated by hand lay-up technique;(i) woven glass fibre epoxy matrix laminates and (ii) woven glass fibre epoxy matrix laminates with 3% graphite particulate fillers. End Notch Flexure (ENF) test was adopted for the measurement of delamination resistance. The two GFRPs laminates show similar mode II delamination resistance. At impact velocities between 2.215 and 4.429 m/sec, the GFRP developed a smaller damage size than the graphite-based GFRP laminates, indicating higher impact toughness. Difference of the impact resistance between the two GFRPs is mainly on the impact damage size developed. The total energy absorbed during the impact remains the same, which is independent of mode II delamination resistance of the GFRP. The history of relevant dynamic and energetic quantities, both to synthesize the dependency of the energy parameters and force threshold values on the impact velocity are discussed.展开更多
The 40Cr steel matrix composites were reinforced with Al203 particulates （Al2O3p） through Si adding to improve the impact-abrasive wear resistance, in which Si powder ranging up to 25% of the AlzO3p weight was added...The 40Cr steel matrix composites were reinforced with Al203 particulates （Al2O3p） through Si adding to improve the impact-abrasive wear resistance, in which Si powder ranging up to 25% of the AlzO3p weight was added into the Al2O3p preforms; then, the composites were fabricated by squeeze casting. For all composites, alumina particles are evenly distributed, and Si powder is dissolved in the matrix. Without Si powder addition, the 40Cr steel matrix contains only pearlite; however, ferrite appears and increases with Si powder addition. In the impact-abrasive wear tests, the impact frequency is 80 min^-1 and the impacting energy is 2 J. With increasing Si powder, the wear of the composites first decreases obviously, reaches the minimum at 10% and then increases. The effect of Si addition on the wear resistance can be attributed to two reasons： one is increasing the hardness of the matrix, and the other is improving the interfacial bonding between Al2O3p and steel. The wear mechanism of the composites is abrasive wear when the Si powder is 〈 10 wt%. Otherwise, it is a mixed mode of abrasive and delamination wear.展开更多
Aimed at the guidance requirements of some missiles which attack targets with terminal impact angle at the terminal point,a new integrated guidance and control design scheme based on variable structure control approac...Aimed at the guidance requirements of some missiles which attack targets with terminal impact angle at the terminal point,a new integrated guidance and control design scheme based on variable structure control approach for missile with terminal impact angle constraint is proposed.First,a mathematical model of an integrated guidance and control model in pitch plane is established,and then nonlinear transformation is employed to transform the mathematical model into a standard form suitable for sliding mode control method design.A sufficient condition for the existence of linear sliding surface is given in terms of linear matrix inequalities（LMIs）,based on which the corresponding reaching motion controller is also developed.To verify the effectiveness of the proposed integrated design scheme,the numerical simulation of missile is made.The simulation results demonstrate that the proposed guidance and control law can guide missile to hit the target with desired impact angle and desired flight attitude angle simultaneously.展开更多
Employing both the Dirac R-matrix and the relativistic distorted wave with independent process and isolated reso- nance approaches, we report resonance enhanced electron impact excitation data （specifically, effectiv...Employing both the Dirac R-matrix and the relativistic distorted wave with independent process and isolated reso- nance approaches, we report resonance enhanced electron impact excitation data （specifically, effective collision strengths） among the lowest 41 levels from the n = 3 configurations of Cu XV. The results show that the latter approach can obtain resonance contributions reasonably well for most excitations of Cu XV, though a comparison between the two approaches shows that the close-coupling effects are truly significant for rather weak excitations, especially for two-electron excitations from the 3s3p4 to 3s23p23d configuration. Resonance contributions are significant （more than two orders of magnitude） for many excitations and dramatically influence the line intensity ratios associated with density diagnostics.展开更多
基金supported by the National Basic Research Program of China(973 Program)[Grant No.2015CB453301]
文摘The density of traffic in Bohai Sea of China is growing,so the evaluation of the impact of potential oil spills becomes necessary.However,the impact of potential oil spills at a large temporal-spatial scale has seldom been studied.In this paper,the effects of potential oil spills in seven main fairways in Chinese Bohai Sea and the risks of five environmental sensitive areas(ESAs)being polluted are studied.A three-dimensional hydrodynamic model,coupled with Lagrangian particle tracking model,was constructed to simulate the transportation of oil spills.Hypothetical oil particles with an idealized,passive tracer were released along fairways and their transportation over20-day and180-day periods were simulated,respectively.An environmental impact matrix was built to reveal the relationship between oil spills in fairways and the pollution of ESAs.Results showed that in short term,Z4and Z5had high risk of being polluted by oil spills.Oil particles released along Fairways1,2and7had strong pollution effects.In long term,Z1,Z3,Z4and Z5had medium risk of being polluted.Oil particles released along Fairway3had strong pollution effects.This study might provide useful data to support marine environment protection.
文摘This study employed the Rapid Impact Assessment Matrix (RIAM) to prioritize the water resources management problems in the North Central Nigeria. This was done through the assessment of the status of water resources management in the region, evaluation of existing policy and strategy of water management, identification of the management problems and the prioritization with RIAM. The stakeholders identified water resources management problems, ranked them in other of severity in different categories and also evaluated them using the RIAM techniques in the administered questionnaire. Eleven problems were analyzed based on the physical/chemical, biological/ecological, social/cultural and economic/operational factors using several impact indicators. Scores were assigned, the RIAM models applied and the averages taken to arrive at the final assessment scores. The two major water resources management problems identified are: 1) inadequate funds for further agricultural, hydroelectric, navigation and industrial development;2) poor data collection and banking. These problems were prioritized by RIAM in order of severity for urgent intervention. The RIAM technique has made a key contribution to the prioritization of water resources management by providing insights into urgent problems according to stakeholders and thus guides the policy maker in appropriate decision making.
基金Funded by the Key Laboratory of Nondestructive Testing (Nanchang Hangkong University), Ministry of Education, China(No.ZD200829001)
文摘The status and the variation of electrical resistance of impacted carbon fiber/epoxy-matrix composites were studied by ultrasonic F-scan and electrical resistance measurement The experimental results shows that impact damage energy threshold value of carbon fabric/epoxy-matrix composites can determine by using ultrasonic F-scan. When the impact energy exceeds the threshold value, damage is generated in composites. Electrical resistance of impacted composites is changed owing to the contact of each carbon fiber unit in composites, which cause a change of the series-parallel in conductors. The veracity of detecting impact damage in composites can be improved in this case.
基金supported by the National Natural Science Foundation of China(Grant Nos.11174213 and 11304266)
文摘We calculate the electron impact excitation of Ni-like gold by using the Dirac R-matrix theory, and the cor- responding collision strengths and effective collision strengths are obtained. In the calculations of the level energy, （1sZ2sZ2p6）3sZ3p63d10, 3s23p63d94/, 3s23p53d104/, and 3s3p63d104/（l = 0, 1,2,3） configurations are included and 107 fine-structure levels are generated. In the calculations of the collision strengths, only the first 59 levels are included. Com- parisons are made with the distorted wave （DW） results of Zeng et al. for both collision strengths and effective collision strengths. For the collision strengths, the two sets of calculations are in excellent agreement for most of the transitions. However, because of the inclusion of the resonances, our effective collision strengths are generally several times larger than those of Zeng et al.. The accuracy of our calculations is assessed.
基金Funded by Key Laboratory of Nondestructive Testing (Nanchang Hangkong University)Ministry of Education, China(No. ZD200829001)Department of Education of Jiangxi Province, China(No. GJJ10531)
文摘Impact damage tolerance is provided in intensity design on composites. The compression intensity of impacted composites requires more than 60% of its original intensity. The influence of impact on compressive intensity and electrical resistance of carbon fabric/epoxy-matrix composites was studied in this paper. The experimental results shows that impact can cause damage in composites, degenerate compressive intensity, and increase resistance. The electrical resistance change rate was used as an evaluation indicator of impact damage tolerance of composites. Impact damage, which results from the applying process of composites, can be identified in time by electrical resistance measurement. So, the safety performance of composites can also be improved.
文摘Investigation was to study the influence of pulse-impact on microstructure of Liquid-Phase-Pulse-Impact Diffusion Welding (LPPIDW) welded joints of aluminum matrix composite SiCp/A356, SiCp/6061Al, Al2O3p/6061Al. Results showed that under the effect of pulse-impact: 1) the interface state between reinforcement particle (SiC, Al2O3) and matrix was prominently;2) the initial pernicious contact-state of reinforcement particles was changed from reinforcement (SiC, Al2O3)/reinforcement (SiC, Al2O3) to reinforcement (SiC, Al2O3)/matrix/ reinforcement (SiC, Al2O3);3) the density of dislocation in the matrix neighboring to and away from the interface in the matrix was higher than its parent composite;and 4) the intensively mutual entwisting of dislocation was occurred. Studies illustrated that: 1) deformation was mainly occurred in the matrix grain;and 2) under the effect of pulse-impact, the matrices around reinforcement (SiC, Al2O3) particles engendered intensive aberration offered a high density nucleus area for matrix crystal, which was in favor of forming nano-grains and improved the properties of the successfully welded composite joints.
文摘Designers of infrastructure are aware that the government, owners and users become more and more concerned about negative environmental impacts of tunnels, so environmental assessment of tunnels are becoming an issue in the process of tunnel design. In this study, to assess tunnels in construction and operation phases, the matrix method, through which the “Impacting Factors” and “Environmental Components” are determined, is also outlined. The affected environment was divided into thirteen components, such as Ecology, Surface water, Air quality, etc. In this paper, matrix method was applied to evaluate the impact of tunneling in three typical tunnels and compare them with standard diagrams of Environmental Components that were derived and introduced. These tunnels were: Urban Utility tunnel in Tehran, Eurasia tunnel in Istanbul and Tsuen Wan drainage tunnel in Hong Kong. Based on the acquired results, the present paper finally concluded that among three cases, Tsuen Wan drainage tunnel affects the environment in construction phase more than others, while Eurasia tunnel effects on air quality are more significant in operation phase.
基金part of work package 3(Societal Impacts of Desertification(Gobin et al.2012))of the bilateral VietnameseBelgian research cooperation:"Impact of global climate changeand desertification on the environment and society in South Central Vietnam(case study in the Binh Thuan province)"funded by the Ministry of Science and Technology(Vietnam)and the Belgian Federal Science Policy Office(Belspo)under contract BL/03/V28
文摘Vietnam is a coastal country projected to be heavily affected by climate change.Binh Thuan Province is part of the driest region of Vietnam and is prone to desertification.An expert panel participated in developing a Leopold matrix which allowed for identification of desertification impact factors on the province's socioeconomic activities and assessment of the strength of cause-effect relationships in terms of magnitude and importance.Land use planning,surface water,and the length of the dry season are considered the most important causes,with the overall highest scores for both magnitude and importance in the cause-effect relationship.The largest effects of the different factors are perceived on water supply for agriculture and household use.Water availability and land use planning are important remedial action domains,while drought and land cover require monitoring to assess impacts.The indicators of cause and effect can be used in a longer-term general monitoring and assessment framework to combat desertification in the area.
文摘Wind energy is one of the most basic forms of renewable energy,which shows an increasing rate of development worldwide and also at the European level.However,this rapid deployment of wind farms makes the need for an impact assessment of this type of projects on the natural and man-made environment imperative.The present paper aims to identify and assess the environmental impacts of wind farm projects in the Region of Central Greece.A modified Rapid Impact Assessment Matrix(RIAM)method is used for this purpose.The methodology includes the identification of the existing onshore wind farm projects in the study area,the appropriate modifications of the RIAM method to respond to the characteristics of the projects and the study area,the qualitative assessment of their potential impacts during construction and operational phases and the computation of the Environmental Performance Grade(EPG)of projects based on the pro-posed modified RIAM method.The results reveal that although there are some slight negative impacts on the natural environment of the study area,the examined wind farms contribute positively both to the atmosphere and to the socio-economic environment of the study.This study extends the potential for using RIAM as a tool in environmental impact assessment studies of renewable energy projects.
文摘Purpose： Ramanujacharyulu developed the Power-weakness Ratio （PWR） for scoring tournaments. The PWR algorithm has been advocated （and used） for measuring the impact of journals. We show how such a newly proposed indicator can empirically be tested. Design/methodology/approach： PWR values can be found by recursively multiplying the citation matrix by itself until convergence is reached in both the cited and citing dimensions; the quotient of these two values is defined as PWR. We study the effectiveness of PWR using journal ecosystems drawn from the Library and Information Science （LIS） set of the Web of Science （83 journals） as an example. Pajek is used to compute PWRs for the full set, and Excel for the computation in the case of the two smaller sub-graphs： （1） JASIST＋ the seven journals that cite JASISTmore than 100 times in 2012; and （2） MIS Quart＋ the nine journals citing this journal to the same extent. Findings： A test using the set of 83 journals converged, but did not provide interpretable results. Further decomposition of this set into homogeneous sub-graphs shows that--like most other journal indicators--PWR can perhaps be used within homogeneous sets, but not across citation communities. We conclude that PWR does not work as a journal impact indicator; journal impact, for example, is not a tournament. Research limitations： Journals that are not represented on the ＂citing＂ dimension of the matrix--for example, because they no longer appear, but are still registered as ＂cited＂ （e.g. ARIST）-distort the PWR ranking because of zeros or very low values in the denominator. Practical implications： The association of＂cited＂ with ＂power＂ and ＂citing＂ with ＂weakness＂ can be considered as a metaphor. In our opinion, referencing is an actor category and can bestudied in terms of behavior, whereas ＂citedness＂ is a property of a document with an expected dynamics very different from that of＂citing.＂ From this perspective, the PWR model is not valid as a journal indicator. Originality/value： Arguments for using PWR are： （1） its symmetrical handling of the rows and columns in the asymmetrical citation matrix, （2） its recursive algorithm, and （3） its mathematical elegance. In this study, PWR is discussed and critically assessed.
文摘This work presents the delamination resistance of woven glass fibre reinforced polymers (GFRP) and its influence on GFRP’s resistance to point impact. Two different types of laminates were fabricated by hand lay-up technique;(i) woven glass fibre epoxy matrix laminates and (ii) woven glass fibre epoxy matrix laminates with 3% graphite particulate fillers. End Notch Flexure (ENF) test was adopted for the measurement of delamination resistance. The two GFRPs laminates show similar mode II delamination resistance. At impact velocities between 2.215 and 4.429 m/sec, the GFRP developed a smaller damage size than the graphite-based GFRP laminates, indicating higher impact toughness. Difference of the impact resistance between the two GFRPs is mainly on the impact damage size developed. The total energy absorbed during the impact remains the same, which is independent of mode II delamination resistance of the GFRP. The history of relevant dynamic and energetic quantities, both to synthesize the dependency of the energy parameters and force threshold values on the impact velocity are discussed.
基金This work was supported by the financial support of National Natural Science Foundation of China （Grant No. 51265019）.
文摘The 40Cr steel matrix composites were reinforced with Al203 particulates （Al2O3p） through Si adding to improve the impact-abrasive wear resistance, in which Si powder ranging up to 25% of the AlzO3p weight was added into the Al2O3p preforms; then, the composites were fabricated by squeeze casting. For all composites, alumina particles are evenly distributed, and Si powder is dissolved in the matrix. Without Si powder addition, the 40Cr steel matrix contains only pearlite; however, ferrite appears and increases with Si powder addition. In the impact-abrasive wear tests, the impact frequency is 80 min^-1 and the impacting energy is 2 J. With increasing Si powder, the wear of the composites first decreases obviously, reaches the minimum at 10% and then increases. The effect of Si addition on the wear resistance can be attributed to two reasons： one is increasing the hardness of the matrix, and the other is improving the interfacial bonding between Al2O3p and steel. The wear mechanism of the composites is abrasive wear when the Si powder is 〈 10 wt%. Otherwise, it is a mixed mode of abrasive and delamination wear.
基金supported by the Nationa Natural Science Foundation of China(60434010)Outstanding Youth Fund of Heilongjiang Province(JC200606)
文摘Aimed at the guidance requirements of some missiles which attack targets with terminal impact angle at the terminal point,a new integrated guidance and control design scheme based on variable structure control approach for missile with terminal impact angle constraint is proposed.First,a mathematical model of an integrated guidance and control model in pitch plane is established,and then nonlinear transformation is employed to transform the mathematical model into a standard form suitable for sliding mode control method design.A sufficient condition for the existence of linear sliding surface is given in terms of linear matrix inequalities（LMIs）,based on which the corresponding reaching motion controller is also developed.To verify the effectiveness of the proposed integrated design scheme,the numerical simulation of missile is made.The simulation results demonstrate that the proposed guidance and control law can guide missile to hit the target with desired impact angle and desired flight attitude angle simultaneously.
基金supported by the National Natural Science Foundation of China(Grant Nos.11076009 and 11374062)the Chinese Association of Atomic and Molecular Data,the Chinese National Fusion Project for ITER(Grant No.2015GB117000)the Leading Academic Discipline Project of Shanghai,China(Grant No.B107)
文摘Employing both the Dirac R-matrix and the relativistic distorted wave with independent process and isolated reso- nance approaches, we report resonance enhanced electron impact excitation data （specifically, effective collision strengths） among the lowest 41 levels from the n = 3 configurations of Cu XV. The results show that the latter approach can obtain resonance contributions reasonably well for most excitations of Cu XV, though a comparison between the two approaches shows that the close-coupling effects are truly significant for rather weak excitations, especially for two-electron excitations from the 3s3p4 to 3s23p23d configuration. Resonance contributions are significant （more than two orders of magnitude） for many excitations and dramatically influence the line intensity ratios associated with density diagnostics.
