To mill fine and well-defined micro-dimpled structures,a machining manner of spiral trajectory tool reciprocating motion,where the tool repeats the process of‘feed milling–retract–cutting feed–feed milling again’...To mill fine and well-defined micro-dimpled structures,a machining manner of spiral trajectory tool reciprocating motion,where the tool repeats the process of‘feed milling–retract–cutting feed–feed milling again’along the spiral trajectory,was proposed.From the kinematics analysis,it is found that the machining quality of micro-dimpled structures is highly dependent on the machining trajectory using spiral trajectory tool reciprocating motion.To reveal this causation,simulation modelling and experimental studies were carried out.A simulation model was developed to quantitatively and qualitatively investigate the influence of the trajectory discretization strategies(constant-angle and constant-arc length)and parameters(discrete angle,discrete arc length,and pitch)on surface texture and residual height of micro-dimpled structures.Subsequently,micro-dimpled structures were milled under different trajectory discretization strategies and parameters with spiral trajectory tool reciprocating motion.A comprehensive comparison between the milled results and simulation analysis was made based on geometry accuracy,surface morphology and surface roughness of milled dimples.Meanwhile,the errors and factors affecting the above three aspects were analyzed.The results demonstrate both the feasibility of the established simulation model and the machining capability of this machining way in milling high-quality micro-dimpled structures.Spiral trajectory tool reciprocating motion provides a new machining way for milling micro-dimpled structures and micro-dimpled functional surfaces.And an appropriate machining trajectory can be generated based on the optimized trajectory parameters,thus contributing to the improvement of machining quality and efficiency.展开更多
An integrated dynamic model of China＇s deep ocean mining system is developed and the fast simulation analysis of its longitudinal reciprocating motion operation processes is achieved. The seafloor tracked miner is bu...An integrated dynamic model of China＇s deep ocean mining system is developed and the fast simulation analysis of its longitudinal reciprocating motion operation processes is achieved. The seafloor tracked miner is built as a three-dimensional single-body model with six-degree-of-freedom. The track-terrain interaction is modeled by partitioning the track-terrain interface into a certain number of mesh elements with three mutually perpendicular forces, including the normal force, the longitudinal shear force and the lateral shear force, acting on the center point of each mesh element. The hydrodynamic force of the miner is considered and applied. By considering the operational safety and collection efficiency, two new mining paths for the miner on the seafloor are proposed, which can be simulated with the established single-body dynamic model of the miner. The pipeline subsystem is built as a three-dimensional multi-body discrete element model, which is divided into rigid elements linked by flexible connectors. The flexible connector without mass is represented by six spring-damper elements. The external hydrodynamic forces of the ocean current from the longitudinal and lateral directions are both considered and modeled based on the Morison formula and applied to the mass center of each corresponding discrete rigid element. The mining ship is simplified and represented by a general kinematic point, whose heave motion induced by the ocean waves and the longitudinal and lateral towing motions are considered and applied. By integrating the single-body dynamic model of the miner and the multi-body discrete element dynamic model of the pipeline, and defining the kinematic equations of the mining ship, the integrated dynamic model of the total deep ocean mining system is formed. The longitudinal reciprocating motion operation modes of the total mining system, which combine the active straight-line and turning motions of the miner and the ship, and the passive towed motions of the pipeline, are proposed and simulated with the developed 3D dynamic model. Some critical simulation results are obtained and analyzed, such as the motion trajectories of key subsystems, the velocities of the buoyancy modules and the interaction forces between subsystems, which in a way can provide important theoretical basis and useful technical reference for the practical deep ocean mining system analysis, operation and control.展开更多
Magnetic force transmission of a reciprocating motion is studied by theoretical analysis and experiment. A mathematical model for calculating the magnetic force is derived using the theory of equivalent magnetic charg...Magnetic force transmission of a reciprocating motion is studied by theoretical analysis and experiment. A mathematical model for calculating the magnetic force is derived using the theory of equivalent magnetic charges. An experimental rig is constructed to test the transmission and the model is verified by experiment. Effect of the transmission parameters on the magnetic force is analyzed theoretically from the model, and characteristic of the transmission is studied experimentally. Since the transmission is without direct contact between two elements, it is suitable for application in an organism.展开更多
Low-rise buildings are susceptible to high-frequency ground motion.The high-frequency ground motions at regional distances are mainly controlled by crustal Lg waves whose amplitudes are typically much larger than thos...Low-rise buildings are susceptible to high-frequency ground motion.The high-frequency ground motions at regional distances are mainly controlled by crustal Lg waves whose amplitudes are typically much larger than those of body waves.In this study,we develop a Lg-wave Q model for the Sichuan and Yunnan region in the frequency band of 0.3–2.0 Hz using regional seismic records of 1166 earthquakes recorded at 152 stations.Comparison between the observed pattern of ground motion from real earthquake and model prediction demonstrates the robustness and effectiveness of our Lg-Q model.Then,assuming that the Lg-wave Q structure is the main factor affecting the propagation of the high-frequency ground motions,we calculate the spatial distributions of high-frequency ground motions from scenario earthquakes at different locations in the region using the average Lg-wave attenuation model over the frequency band of 0.3–2.0 Hz.We also use the Lg-Q model to estimate the distribution of cumulative energy of high-frequency ground motions based on the historical seismicity of the Sichuan and Yunnan region.Results show that the Lg-Q model can be used effectively in estimating the spatial distribution of high-frequency seismic energies and thus can contribute to the assessment of seismic hazard to low-rise buildings.展开更多
The equipment has a high and strict requirement of dynamic seals, especially working with Long stroke reciprocating motion under a sandy condition and with a great deal of gas. The seal form of power cylinder on the u...The equipment has a high and strict requirement of dynamic seals, especially working with Long stroke reciprocating motion under a sandy condition and with a great deal of gas. The seal form of power cylinder on the underground part of hydraulic power rodless type oil extraction equipment is studied. We design three seal structures, do the performance testing and the life testing with related equipment. It turned out that the seal form that combines gap seal with sand prevention techniques has high performance, longer life. The power cylinder works stably and reliably.展开更多
Amid the growing interest in triboelectric nanogenerators(TENGs)as novel energy-harvesting devices,several studies have focused on direct current(DC)TENGs to generate a stable DC output for operating electronic device...Amid the growing interest in triboelectric nanogenerators(TENGs)as novel energy-harvesting devices,several studies have focused on direct current(DC)TENGs to generate a stable DC output for operating electronic devices.However,owing to the working mechanisms of conventional DC TENGs,generating a stable DC output from reciprocating motion remains a challenge.Accordingly,we propose a bidirectional rotating DC TENG(BiR-TENG),which can generate DC outputs,regardless of the direction of rotation,from reciprocating motions.The distinct design of the BiR-TENG enables the mechanical rectification of the alternating current output into a rotational-direction-dependent DC output.Furthermore,it allows the conversion of the rotational-direction-dependent DC output into a unidirectional DC output by adapting the configurations depending on the rotational direction.Owing to these tailored design strategies and subsequent optimizations,the BiR-TENG could generate an effective unidirectional DC output.Applications of the BiR-TENG for the reciprocating motions of swinging doors and waves were demonstrated by harnessing this output.This study demonstrates the potential of the BiR-TENG design strategy as an effective and versatile solution for energy harvesting from reciprocating motions,highlighting the suitability of DC outputs as an energy source for electronic devices.展开更多
Hydrodynamic numerical simulations are used to conduct structural analyses and inform the design of engineered marine structures.In this paper,a hydrodynamic numerical model of“Nanhai Tiaozhan”(NHTZ)FPS platform was...Hydrodynamic numerical simulations are used to conduct structural analyses and inform the design of engineered marine structures.In this paper,a hydrodynamic numerical model of“Nanhai Tiaozhan”(NHTZ)FPS platform was established according to its design specifications.The model was assessed with two sets of field monitoring data representing harsh and conventional sea states.The motion responses of the platform according to the measured data and the hydrodynamic simulation were compared by reviewing their statistical characteristics,distributions,and spectrum characteristics.The comparison showed that the hydrodynamic model could correctly simulate the frequency domain characteristics of the motion responses of the platform.However,the simulation underestimated the reciprocating motions of the floating body and the influence of slow drift on the motion of the platform.Meanwhile,analysis of the monitoring data revealed that the translational degrees of freedom(DOF)and rotational DOF of the platform were coupled,but these coupled motion states were not apparent in the hydrodynamic simulation.展开更多
The two characteristics of near-fault ground motions, i.e., the forward directivity effect and permanent displacement effect, result in long period and large velocity pulse in the velocity time history and large step ...The two characteristics of near-fault ground motions, i.e., the forward directivity effect and permanent displacement effect, result in long period and large velocity pulse in the velocity time history and large step pulse in the displacement time history. Considering the two effects, a simple expression of continuous function for equivalent velocity pulse time history is presented in this paper. The equivalent pulse model, in which the pulse period, peak velocity and pulse shape are described by five parameters, is highly advantageous to fit and simulate the pulse-type velocity time history. The equivalent pulse model comprises only one low-frequency component while the high-frequency component of a pulse-type earthquake record cannot be considered. Based on 28 records of 11 earthquakes, the pulse frequency of pulse-type records is generally less than 1 Hz. Therefore the low-frequency component and high-frequency component are simulated respectively and combined them together to generate a pulse-type ground motion.展开更多
The present paper gives the design of a new HGMS for magnetic separation of sulphides.The main characteristics of this HGMS are using iron-cladding saddle shaped magnetic coil for instead of the ordinary magnet,and co...The present paper gives the design of a new HGMS for magnetic separation of sulphides.The main characteristics of this HGMS are using iron-cladding saddle shaped magnetic coil for instead of the ordinary magnet,and combining reciprocal-linear motion with vibration to actuate the separation box,and the magnetic field intensity is high up to 2T as well.For improving the magnet system design,a modified finite element method is used to calculate the distribution of magnetic field intensity of separation space of the magnetic coil,and according to the calculation results the magnetic leakage coefficient can be determined easily,thus making designers apart from the empirical way.展开更多
The air valve is the core component of the cyclic operation of the compressor cylinder,and its structure and performance largely determine whether the reciprocating compressor can operate more efficiently and economic...The air valve is the core component of the cyclic operation of the compressor cylinder,and its structure and performance largely determine whether the reciprocating compressor can operate more efficiently and economically.On the basis of analyzing the basic structure and working principle of the air valve,this article mainly studies the motion characteristics of the suction valve plate.Based on fluid structure coupling mechanics and using ADINA software as a platform,numerical simulation analysis was conducted on the suction valve of a certain compressor model.Studying the stress of the valve plate and the variation of its upper and lower surface pressure with the opening and closing of the valve plate during the suction process of the compressor provides theoretical guidance for the rationality of the design of the air valve and related components,thereby improving the service life of the air valve and the working efficiency of the compressor.展开更多
A novel way for a compressor to improve its coefficient of performance and enhance its reliability by employing nano-refrigeration lubricant oil was proposed. Onion like fullerenes (OLFs) and NiFe2O4 nano-composites, ...A novel way for a compressor to improve its coefficient of performance and enhance its reliability by employing nano-refrigeration lubricant oil was proposed. Onion like fullerenes (OLFs) and NiFe2O4 nano-composites, modified by Span 80, were dispersed in refrigeration oil KFR22 by solid grinding (SG). Morphologies of NiFe2O4 nano-composites were characterized by using transmission electron microscope (TEM). The tribological properties as a refrigeration lubricants additive were investigated using SRV (II), a multi-functional reciprocating friction and wear tester. The results showed that the friction coefficient was decreased from 0.15 to 0.04.展开更多
基金co-supported the National Natural Science Foundation of China(No.52235010)the Heilongjiang Postdoctoral Fund(No.LBH-Z22136)the New Era Longjiang Excellent Master and Doctoral Dissertation Fund(No.LJYXL2022-057).
文摘To mill fine and well-defined micro-dimpled structures,a machining manner of spiral trajectory tool reciprocating motion,where the tool repeats the process of‘feed milling–retract–cutting feed–feed milling again’along the spiral trajectory,was proposed.From the kinematics analysis,it is found that the machining quality of micro-dimpled structures is highly dependent on the machining trajectory using spiral trajectory tool reciprocating motion.To reveal this causation,simulation modelling and experimental studies were carried out.A simulation model was developed to quantitatively and qualitatively investigate the influence of the trajectory discretization strategies(constant-angle and constant-arc length)and parameters(discrete angle,discrete arc length,and pitch)on surface texture and residual height of micro-dimpled structures.Subsequently,micro-dimpled structures were milled under different trajectory discretization strategies and parameters with spiral trajectory tool reciprocating motion.A comprehensive comparison between the milled results and simulation analysis was made based on geometry accuracy,surface morphology and surface roughness of milled dimples.Meanwhile,the errors and factors affecting the above three aspects were analyzed.The results demonstrate both the feasibility of the established simulation model and the machining capability of this machining way in milling high-quality micro-dimpled structures.Spiral trajectory tool reciprocating motion provides a new machining way for milling micro-dimpled structures and micro-dimpled functional surfaces.And an appropriate machining trajectory can be generated based on the optimized trajectory parameters,thus contributing to the improvement of machining quality and efficiency.
基金supported by the National Natural Science Foundation of China(Grant No.51105386)the National Deep-Sea Technology Project of Development and Research(Grant No.DYXM-115-04-02-01)the Fundamental Research Funds for the Central Universities(Grant No.2011QNZT058)
文摘An integrated dynamic model of China＇s deep ocean mining system is developed and the fast simulation analysis of its longitudinal reciprocating motion operation processes is achieved. The seafloor tracked miner is built as a three-dimensional single-body model with six-degree-of-freedom. The track-terrain interaction is modeled by partitioning the track-terrain interface into a certain number of mesh elements with three mutually perpendicular forces, including the normal force, the longitudinal shear force and the lateral shear force, acting on the center point of each mesh element. The hydrodynamic force of the miner is considered and applied. By considering the operational safety and collection efficiency, two new mining paths for the miner on the seafloor are proposed, which can be simulated with the established single-body dynamic model of the miner. The pipeline subsystem is built as a three-dimensional multi-body discrete element model, which is divided into rigid elements linked by flexible connectors. The flexible connector without mass is represented by six spring-damper elements. The external hydrodynamic forces of the ocean current from the longitudinal and lateral directions are both considered and modeled based on the Morison formula and applied to the mass center of each corresponding discrete rigid element. The mining ship is simplified and represented by a general kinematic point, whose heave motion induced by the ocean waves and the longitudinal and lateral towing motions are considered and applied. By integrating the single-body dynamic model of the miner and the multi-body discrete element dynamic model of the pipeline, and defining the kinematic equations of the mining ship, the integrated dynamic model of the total deep ocean mining system is formed. The longitudinal reciprocating motion operation modes of the total mining system, which combine the active straight-line and turning motions of the miner and the ship, and the passive towed motions of the pipeline, are proposed and simulated with the developed 3D dynamic model. Some critical simulation results are obtained and analyzed, such as the motion trajectories of key subsystems, the velocities of the buoyancy modules and the interaction forces between subsystems, which in a way can provide important theoretical basis and useful technical reference for the practical deep ocean mining system analysis, operation and control.
文摘Magnetic force transmission of a reciprocating motion is studied by theoretical analysis and experiment. A mathematical model for calculating the magnetic force is derived using the theory of equivalent magnetic charges. An experimental rig is constructed to test the transmission and the model is verified by experiment. Effect of the transmission parameters on the magnetic force is analyzed theoretically from the model, and characteristic of the transmission is studied experimentally. Since the transmission is without direct contact between two elements, it is suitable for application in an organism.
基金supported by the China Postdoctoral Science Foundation
文摘Low-rise buildings are susceptible to high-frequency ground motion.The high-frequency ground motions at regional distances are mainly controlled by crustal Lg waves whose amplitudes are typically much larger than those of body waves.In this study,we develop a Lg-wave Q model for the Sichuan and Yunnan region in the frequency band of 0.3–2.0 Hz using regional seismic records of 1166 earthquakes recorded at 152 stations.Comparison between the observed pattern of ground motion from real earthquake and model prediction demonstrates the robustness and effectiveness of our Lg-Q model.Then,assuming that the Lg-wave Q structure is the main factor affecting the propagation of the high-frequency ground motions,we calculate the spatial distributions of high-frequency ground motions from scenario earthquakes at different locations in the region using the average Lg-wave attenuation model over the frequency band of 0.3–2.0 Hz.We also use the Lg-Q model to estimate the distribution of cumulative energy of high-frequency ground motions based on the historical seismicity of the Sichuan and Yunnan region.Results show that the Lg-Q model can be used effectively in estimating the spatial distribution of high-frequency seismic energies and thus can contribute to the assessment of seismic hazard to low-rise buildings.
文摘The equipment has a high and strict requirement of dynamic seals, especially working with Long stroke reciprocating motion under a sandy condition and with a great deal of gas. The seal form of power cylinder on the underground part of hydraulic power rodless type oil extraction equipment is studied. We design three seal structures, do the performance testing and the life testing with related equipment. It turned out that the seal form that combines gap seal with sand prevention techniques has high performance, longer life. The power cylinder works stably and reliably.
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022R1C1C1008831).This work was also supported by the Human Resources Development of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Ministry of Trade,Industry and Energy of Korea(No.RS-2023-00244330).S J P was supported by Basic Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(No.2018R1A6A1A03025526).
文摘Amid the growing interest in triboelectric nanogenerators(TENGs)as novel energy-harvesting devices,several studies have focused on direct current(DC)TENGs to generate a stable DC output for operating electronic devices.However,owing to the working mechanisms of conventional DC TENGs,generating a stable DC output from reciprocating motion remains a challenge.Accordingly,we propose a bidirectional rotating DC TENG(BiR-TENG),which can generate DC outputs,regardless of the direction of rotation,from reciprocating motions.The distinct design of the BiR-TENG enables the mechanical rectification of the alternating current output into a rotational-direction-dependent DC output.Furthermore,it allows the conversion of the rotational-direction-dependent DC output into a unidirectional DC output by adapting the configurations depending on the rotational direction.Owing to these tailored design strategies and subsequent optimizations,the BiR-TENG could generate an effective unidirectional DC output.Applications of the BiR-TENG for the reciprocating motions of swinging doors and waves were demonstrated by harnessing this output.This study demonstrates the potential of the BiR-TENG design strategy as an effective and versatile solution for energy harvesting from reciprocating motions,highlighting the suitability of DC outputs as an energy source for electronic devices.
基金financially supported by the National Natural Science Foundation of China(Grant No.U1906233)the Central Guidance on Local Science and Technology Development Fund of Shenzhen(Grant No.2021Szvup021)。
文摘Hydrodynamic numerical simulations are used to conduct structural analyses and inform the design of engineered marine structures.In this paper,a hydrodynamic numerical model of“Nanhai Tiaozhan”(NHTZ)FPS platform was established according to its design specifications.The model was assessed with two sets of field monitoring data representing harsh and conventional sea states.The motion responses of the platform according to the measured data and the hydrodynamic simulation were compared by reviewing their statistical characteristics,distributions,and spectrum characteristics.The comparison showed that the hydrodynamic model could correctly simulate the frequency domain characteristics of the motion responses of the platform.However,the simulation underestimated the reciprocating motions of the floating body and the influence of slow drift on the motion of the platform.Meanwhile,analysis of the monitoring data revealed that the translational degrees of freedom(DOF)and rotational DOF of the platform were coupled,but these coupled motion states were not apparent in the hydrodynamic simulation.
基金National Natural Science Foundation of China (50478063)
文摘The two characteristics of near-fault ground motions, i.e., the forward directivity effect and permanent displacement effect, result in long period and large velocity pulse in the velocity time history and large step pulse in the displacement time history. Considering the two effects, a simple expression of continuous function for equivalent velocity pulse time history is presented in this paper. The equivalent pulse model, in which the pulse period, peak velocity and pulse shape are described by five parameters, is highly advantageous to fit and simulate the pulse-type velocity time history. The equivalent pulse model comprises only one low-frequency component while the high-frequency component of a pulse-type earthquake record cannot be considered. Based on 28 records of 11 earthquakes, the pulse frequency of pulse-type records is generally less than 1 Hz. Therefore the low-frequency component and high-frequency component are simulated respectively and combined them together to generate a pulse-type ground motion.
文摘The present paper gives the design of a new HGMS for magnetic separation of sulphides.The main characteristics of this HGMS are using iron-cladding saddle shaped magnetic coil for instead of the ordinary magnet,and combining reciprocal-linear motion with vibration to actuate the separation box,and the magnetic field intensity is high up to 2T as well.For improving the magnet system design,a modified finite element method is used to calculate the distribution of magnetic field intensity of separation space of the magnetic coil,and according to the calculation results the magnetic leakage coefficient can be determined easily,thus making designers apart from the empirical way.
文摘The air valve is the core component of the cyclic operation of the compressor cylinder,and its structure and performance largely determine whether the reciprocating compressor can operate more efficiently and economically.On the basis of analyzing the basic structure and working principle of the air valve,this article mainly studies the motion characteristics of the suction valve plate.Based on fluid structure coupling mechanics and using ADINA software as a platform,numerical simulation analysis was conducted on the suction valve of a certain compressor model.Studying the stress of the valve plate and the variation of its upper and lower surface pressure with the opening and closing of the valve plate during the suction process of the compressor provides theoretical guidance for the rationality of the design of the air valve and related components,thereby improving the service life of the air valve and the working efficiency of the compressor.
文摘A novel way for a compressor to improve its coefficient of performance and enhance its reliability by employing nano-refrigeration lubricant oil was proposed. Onion like fullerenes (OLFs) and NiFe2O4 nano-composites, modified by Span 80, were dispersed in refrigeration oil KFR22 by solid grinding (SG). Morphologies of NiFe2O4 nano-composites were characterized by using transmission electron microscope (TEM). The tribological properties as a refrigeration lubricants additive were investigated using SRV (II), a multi-functional reciprocating friction and wear tester. The results showed that the friction coefficient was decreased from 0.15 to 0.04.
