In this paper, an analytical model for computing the resonant frequency of the gap-coupled ring microstrip patch antennas is developed. The analytical model is based upon the cavity model along with circuit theory. Us...In this paper, an analytical model for computing the resonant frequency of the gap-coupled ring microstrip patch antennas is developed. The analytical model is based upon the cavity model along with circuit theory. Using the field expressions and boundary conditions, the transcendental equation for the structure is developed. The analytically computed results are compared with the simulated results. The simulation work is carried out by using computer simulation technology(CST) microwave studio simulator.The comparison between simulated and computed results shows good agreement.展开更多
In this paper, the numerical computation of resonant frequency of the two gap-coupled circular microstrip patch antenna loaded with shorting post by using cavity model is presented. The numerically computed results ar...In this paper, the numerical computation of resonant frequency of the two gap-coupled circular microstrip patch antenna loaded with shorting post by using cavity model is presented. The numerically computed results are compared with simulated results. The two gap-coupled circular microstrip patch antenna loaded with shorting post miniaturize the cross-sectional dimension of the radiating patch at the microwave frequency, which is useful for short range communications or contactless identification systems. The simulation has been performed using method-of-moments based commercially available simulator IE3D.展开更多
Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and ...Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and radiation patterns.When the EBG cells were placed closer to the edge of the substrate,the EBG antenna had a larger front radiation and a narrower bandwidth.Integrating the EBG cells closer to the center of the patch resulted in a wider impedance bandwidth,a wider axial ratio bandwidth and a decreased front gain.展开更多
The propose of this paper is to design the circularly polarized antenna for mobile base station, using a curved strip dipole associated with U-shaped reflector and multi-layer metallic rod elec-tromagnetic band gap (E...The propose of this paper is to design the circularly polarized antenna for mobile base station, using a curved strip dipole associated with U-shaped reflector and multi-layer metallic rod elec-tromagnetic band gap (EBG). It can be used to simplify the single feed system of an antenna. The advantages of this proposed antenna are easy fabrication and installation, high gain and light weight. Moreover, it provides a sectoral radiation pattern, a main beam having a narrow beam width in the vertical direction and wider beamwidth in the horizontal direction, which are appro-priate for mobile phone base station. The half-power beam in the H-plane and E-plane are 60 and 14.4 degrees, respectively. The antenna is designed and analyzed by using a computer simulation technology (CST). In addition, S11, axial ratio, radiation pattern and gain are displayed. The designed technique could be confirmed by a measurement resulting from prototype antenna corresponding to simulation results. The proposed antenna has a bandwidth covering the frequency range of 1870 - 2170 MHz, and the gain of the antenna increases up to 15.11 dBi.展开更多
The Fabry-Perot resonator (FPR) antenna has found wide applications in microwave and millimeter waves and recently attracted considerable interest. In this paper, a summary of planar and cylindrical structures, analyt...The Fabry-Perot resonator (FPR) antenna has found wide applications in microwave and millimeter waves and recently attracted considerable interest. In this paper, a summary of planar and cylindrical structures, analytic models and research development is presented, and a comparison between these structures and analytic models is made, showing that such analytic models as the FP cavity mode, electromagnetic band gap (EBG) defect mode, transmission line mode, and leaky-wave mode are consistent when applied to analyze this type of resonator antenna. Some interesting topics under recent research, including dual or multi-band, improvement of gain bandwidth, low profile and beam control, are surveyed.展开更多
This paper presents a sector antenna for base station of mobile phone using microstrip antenna (MSA) array with curved woodpile Electromagnetic Band Gap (EBG). The advantages of this pro- posed antenna are easy fabric...This paper presents a sector antenna for base station of mobile phone using microstrip antenna (MSA) array with curved woodpile Electromagnetic Band Gap (EBG). The advantages of this pro- posed antenna are easy fabrication and installation, high gain, and light weight. Moreover, it pro- vides a fan-shaped radiation pattern , a main beam having a narrow beam width in the vertical di- rection and a wider beamwidth in the horizontal direction, which are appropriate for mobile phone base station. The half-power beamwidths in the H-plane and E-plane are 37.4 and 8.7 de- grees, respectively. The paper also presents the design procedures of a 1 × 8 array antenna using MSAs associated with U-shaped reflector for decreasing their back and side lobes. A Computer Si- mulation Technology (CST) software has been used to compute the reflection coefficient (S11), radiation patterns, and gain of this antenna. The bandwidth, at S11 (?10 dB), is enough, which can be well utilized for 3G base station, with a gain 20.84 dB.展开更多
Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagn...Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagnetic band-gap structures by adjusting the capacitance and changing the inductance through varying the width and length of spiral defected ground structure. Then by applying the three different spirals shapes (one, two and four arms) as the ground plane of microstrip patch antenna with different feeding techniques to create multi or ultra wide-band, improve the antenna gain and reduce the antenna size, it is found that the four arms spiral defected ground structure of microstrip patch antenna with offset feed gives good performance, electrical size reduction to about 75% as compared to the original patch size and ultra-wide bandwidth extends from 2 GHz up to 12 GHz with ?8 dB impedance bandwidth.展开更多
Anovel compact E shape High Impedance Surface(HIS) Electromagnetic Band-Gap(EBG) comprising Amended Minkowski Fractal Boundary(AMFB),Added Metal Strips(AMS),and metal plated via printed on a Rogers TMM 10i substrate i...Anovel compact E shape High Impedance Surface(HIS) Electromagnetic Band-Gap(EBG) comprising Amended Minkowski Fractal Boundary(AMFB),Added Metal Strips(AMS),and metal plated via printed on a Rogers TMM 10i substrate is presented.The first order AMFB and ABS are introduced for equivalent capacitance enhancement and miniaturization with effective space-filling characteristics.The dimension of lattice size is only The proposed structure exhibits a most compact characteristic about 35% size reduction as compared with conven-tional mushroom-like HIS-EBG,and better surface-wave decoupling of around 9 dB at the operating frequency band.Details of design parameters which affect the whole performance of certain band-gap are intensively investigated.A constructed prototype is potential candidate for antenna system per-formance enhancement.展开更多
将Mushroom电磁带隙结构(Electromagnetic Band Gap,EBG)的表面波带隙和同相反射特性同时用于波导缝隙阵列天线的设计,利用EBG的带隙特性抑制天线阵中的表面波,以改善天线的辐射性能;利用EBG的同相反射特性实现天线雷达散射截面(Radar C...将Mushroom电磁带隙结构(Electromagnetic Band Gap,EBG)的表面波带隙和同相反射特性同时用于波导缝隙阵列天线的设计,利用EBG的带隙特性抑制天线阵中的表面波,以改善天线的辐射性能;利用EBG的同相反射特性实现天线雷达散射截面(Radar Cross Section,RCS)的减缩,天线综合性能得到较大提升。制作了EBG波导缝隙天线阵样品,并对天线阵的阵元互耦、辐射方向图及天线阵RCS等指标进行了测试,结果与理论预期相吻合,有效地降低了阵元间互耦及天线阵RCS。展开更多
文摘In this paper, an analytical model for computing the resonant frequency of the gap-coupled ring microstrip patch antennas is developed. The analytical model is based upon the cavity model along with circuit theory. Using the field expressions and boundary conditions, the transcendental equation for the structure is developed. The analytically computed results are compared with the simulated results. The simulation work is carried out by using computer simulation technology(CST) microwave studio simulator.The comparison between simulated and computed results shows good agreement.
文摘In this paper, the numerical computation of resonant frequency of the two gap-coupled circular microstrip patch antenna loaded with shorting post by using cavity model is presented. The numerically computed results are compared with simulated results. The two gap-coupled circular microstrip patch antenna loaded with shorting post miniaturize the cross-sectional dimension of the radiating patch at the microwave frequency, which is useful for short range communications or contactless identification systems. The simulation has been performed using method-of-moments based commercially available simulator IE3D.
基金Supported by the National Natural Science Foundation of China(61102022)the Fundamental Research Foundation of Beijing Institute of Technology of China(20120542014)
文摘Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and radiation patterns.When the EBG cells were placed closer to the edge of the substrate,the EBG antenna had a larger front radiation and a narrower bandwidth.Integrating the EBG cells closer to the center of the patch resulted in a wider impedance bandwidth,a wider axial ratio bandwidth and a decreased front gain.
文摘The propose of this paper is to design the circularly polarized antenna for mobile base station, using a curved strip dipole associated with U-shaped reflector and multi-layer metallic rod elec-tromagnetic band gap (EBG). It can be used to simplify the single feed system of an antenna. The advantages of this proposed antenna are easy fabrication and installation, high gain and light weight. Moreover, it provides a sectoral radiation pattern, a main beam having a narrow beam width in the vertical direction and wider beamwidth in the horizontal direction, which are appro-priate for mobile phone base station. The half-power beam in the H-plane and E-plane are 60 and 14.4 degrees, respectively. The antenna is designed and analyzed by using a computer simulation technology (CST). In addition, S11, axial ratio, radiation pattern and gain are displayed. The designed technique could be confirmed by a measurement resulting from prototype antenna corresponding to simulation results. The proposed antenna has a bandwidth covering the frequency range of 1870 - 2170 MHz, and the gain of the antenna increases up to 15.11 dBi.
基金Project (Nos. 60671016 and 60621002) supported by the National Natural Science Foundation of China
文摘The Fabry-Perot resonator (FPR) antenna has found wide applications in microwave and millimeter waves and recently attracted considerable interest. In this paper, a summary of planar and cylindrical structures, analytic models and research development is presented, and a comparison between these structures and analytic models is made, showing that such analytic models as the FP cavity mode, electromagnetic band gap (EBG) defect mode, transmission line mode, and leaky-wave mode are consistent when applied to analyze this type of resonator antenna. Some interesting topics under recent research, including dual or multi-band, improvement of gain bandwidth, low profile and beam control, are surveyed.
文摘This paper presents a sector antenna for base station of mobile phone using microstrip antenna (MSA) array with curved woodpile Electromagnetic Band Gap (EBG). The advantages of this pro- posed antenna are easy fabrication and installation, high gain, and light weight. Moreover, it pro- vides a fan-shaped radiation pattern , a main beam having a narrow beam width in the vertical di- rection and a wider beamwidth in the horizontal direction, which are appropriate for mobile phone base station. The half-power beamwidths in the H-plane and E-plane are 37.4 and 8.7 de- grees, respectively. The paper also presents the design procedures of a 1 × 8 array antenna using MSAs associated with U-shaped reflector for decreasing their back and side lobes. A Computer Si- mulation Technology (CST) software has been used to compute the reflection coefficient (S11), radiation patterns, and gain of this antenna. The bandwidth, at S11 (?10 dB), is enough, which can be well utilized for 3G base station, with a gain 20.84 dB.
文摘Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagnetic band-gap structures by adjusting the capacitance and changing the inductance through varying the width and length of spiral defected ground structure. Then by applying the three different spirals shapes (one, two and four arms) as the ground plane of microstrip patch antenna with different feeding techniques to create multi or ultra wide-band, improve the antenna gain and reduce the antenna size, it is found that the four arms spiral defected ground structure of microstrip patch antenna with offset feed gives good performance, electrical size reduction to about 75% as compared to the original patch size and ultra-wide bandwidth extends from 2 GHz up to 12 GHz with ?8 dB impedance bandwidth.
基金Supported by the 2010 Natural Science Foundation of Shanghai (No. 09ZR1430400)
文摘Anovel compact E shape High Impedance Surface(HIS) Electromagnetic Band-Gap(EBG) comprising Amended Minkowski Fractal Boundary(AMFB),Added Metal Strips(AMS),and metal plated via printed on a Rogers TMM 10i substrate is presented.The first order AMFB and ABS are introduced for equivalent capacitance enhancement and miniaturization with effective space-filling characteristics.The dimension of lattice size is only The proposed structure exhibits a most compact characteristic about 35% size reduction as compared with conven-tional mushroom-like HIS-EBG,and better surface-wave decoupling of around 9 dB at the operating frequency band.Details of design parameters which affect the whole performance of certain band-gap are intensively investigated.A constructed prototype is potential candidate for antenna system per-formance enhancement.
文摘将Mushroom电磁带隙结构(Electromagnetic Band Gap,EBG)的表面波带隙和同相反射特性同时用于波导缝隙阵列天线的设计,利用EBG的带隙特性抑制天线阵中的表面波,以改善天线的辐射性能;利用EBG的同相反射特性实现天线雷达散射截面(Radar Cross Section,RCS)的减缩,天线综合性能得到较大提升。制作了EBG波导缝隙天线阵样品,并对天线阵的阵元互耦、辐射方向图及天线阵RCS等指标进行了测试,结果与理论预期相吻合,有效地降低了阵元间互耦及天线阵RCS。
