Frequency-modulated continuous-wave radar enables the non-contact and privacy-preserving recognition of human behavior.However,the accuracy of behavior recognition is directly influenced by the spatial relationship be...Frequency-modulated continuous-wave radar enables the non-contact and privacy-preserving recognition of human behavior.However,the accuracy of behavior recognition is directly influenced by the spatial relationship between human posture and the radar.To address the issue of low accuracy in behavior recognition when the human body is not directly facing the radar,a method combining local outlier factor with Doppler information is proposed for the correction of multi-classifier recognition results.Initially,the information such as distance,velocity,and micro-Doppler spectrogram of the target is obtained using the fast Fourier transform and histogram of oriented gradients-support vector machine methods,followed by preliminary recognition.Subsequently,Platt scaling is employed to transform recognition results into confidence scores,and finally,the Doppler-local outlier factor method is utilized to calibrate the confidence scores,with the highest confidence classifier result considered as the recognition outcome.Experimental results demonstrate that this approach achieves an average recognition accuracy of 96.23%for comprehensive human behavior recognition in various orientations.展开更多
By using the B-spline expansion technique and a model potential of the alkali atoms, the properties of frequency- modulated excitation of Rydberg potassium atoms in a static electric field and a microwave field are in...By using the B-spline expansion technique and a model potential of the alkali atoms, the properties of frequency- modulated excitation of Rydberg potassium atoms in a static electric field and a microwave field are investigated by using the time-dependent two-level approach. We successfully reproduce the square wave oscillations in the low frequency, the stair step population oscillations in the intermediate frequency, and the multiphoton transitions in the high frequency with respect to the unmodulated Rabi frequency, which have been observed experimentally by Noel et al. [Phys. Rev. A 58 2265 （1998）]. Furthermore, we also numerically obtain the discretized Rabi oscillations predicted in the Landau Zener accumulation model.展开更多
A technique for measuring the linearity of a linearly frequency-modulated continuous wave (LFM-CW) signal is presented. It uses a delay-line and a mixer to sense the slope of the output of a sweep oscillator, so that ...A technique for measuring the linearity of a linearly frequency-modulated continuous wave (LFM-CW) signal is presented. It uses a delay-line and a mixer to sense the slope of the output of a sweep oscillator, so that the original form of frequency function deviated from idealized linear slope is retrieved by means of spectrum analysis. Consequently,the linearity of the LFM signal is determined. The formulation is performed based on the principle that an angle-modulated signal can be approximated by an amplitude-modulated signal if the modulation coefficient is sufficiently small. To examine the validity of the procedure and to study the effect of each parameter on the accuracy of measurement, a number of computer simulations has been made. The results of simulation show that the error of the measurement is less than 2%.展开更多
Multi-rotor aircraft has great potential in urban traffic and military use and its noise problem has attracted more attention recently.Multi-rotor aircrafts are typically controlled by changing the rotation speeds of ...Multi-rotor aircraft has great potential in urban traffic and military use and its noise problem has attracted more attention recently.Multi-rotor aircrafts are typically controlled by changing the rotation speeds of the rotors.To reduce the noise of multiple frequency-modulated rotors,a global noise attenuation method is proposed in this study.First,the fast prediction method is used to estimate the global noise of the multirotor with different configurations online.Meanwhile,the sound field reproduction method is used to obtain the control signal of the loudspeaker array to achieve global noise attenuation.Then,the influence of array arrangement on noise reduction is analyzed in the acoustic modal domain,which reveals that different optimization models are needed to minimize the noise power or/and the noise pressure in some directions when the scale of the array is limited.Next,to improve the real-time performance of the system,the online calculation of the optimal control signal is transformed into the offline design of the optimal filter,which satisfies the target frequency-domain characteristics.Finally,the experimental results of the noise of a model quadrotor in the anechoic chamber were consistent with the predicted results.The simulation results of noise attenuation for the quadrotor show that the method proposed reduced the global noise power by about 13 dB.Moreover,the noise region radiated from the quadrotor to the ground with the boundary of 40 dB was reduced to 8.4%of that before control.展开更多
We present an alternative scheme for implementing the unconventional geometric two-qubit phase gate and prepar- ing multiqubit entanglement by using a frequency-modulated laser field to simultaneously illuminate all i...We present an alternative scheme for implementing the unconventional geometric two-qubit phase gate and prepar- ing multiqubit entanglement by using a frequency-modulated laser field to simultaneously illuminate all ions. Selecting the index of modulation yields selective mechanisms for coupling and decoupling between the internal and the external states of the ions. By the selective mechanisms, we obtain the unconventional geometric two-qubit phase gate, multiparticle Greenberger-Horne-Zeilinger states and highly entangled cluster states. Our scheme is insensitive to the thermal motion of the ions.展开更多
Laser absorption spectroscopy has proven to be an effective approach for gas sensing, which plays an important rolein the fields of military, industry, medicine and basic research. This paper presents a multiplexed ga...Laser absorption spectroscopy has proven to be an effective approach for gas sensing, which plays an important rolein the fields of military, industry, medicine and basic research. This paper presents a multiplexed gas sensing system basedon optical frequency comb (OFC) calibrated frequency-modulated continuous-wave (FMCW) tuning nonlinearity. Thesystem can be used for multi-parameter synchronous measurement of gas absorption spectrum and multiplexed opticalpath. Multi-channel parallel detection is realized by combining wavelength division multiplexing (WDM) and frequencydivision multiplexing (FDM) techniques. By introducing nonlinear optical crystals, broadband spectrum detection is simultaneouslyachieved over a bandwidth of hundreds of nanometers. An OFC with ultra-high frequency stability is used asthe frequency calibration source, which guarantees the measurement accuracy. The test samples involve H13C14N, C_(2)H_(2)and Rb vapor cells of varying densities and 5 parallel measurement experiments are designed. The results show that themeasurement accuracies of spectral absorption line and the optical path are 150 MHz and 20 m, respectively. The schemeoffers the advantages of multiplexed, multi-parameter, wide spectrum and high resolution detection, which can realize theidentification of multi-gas components and the high-precision inversion of absorption lines under different environments.The proposed sensor demonstrates great potential in the field of high-resolution absorption spectrum measurement for gassensing applications.展开更多
Aim To get the theory base of designing FM fuze's jamming signal, its jamming mechanism was studied. Methods A sinusoidal FM fuze was analyzed in time domain and frequency domain and the concept of channel lea...Aim To get the theory base of designing FM fuze's jamming signal, its jamming mechanism was studied. Methods A sinusoidal FM fuze was analyzed in time domain and frequency domain and the concept of channel leak was presented. Results It was proved that information channel leak exists in FM fuze because of the nonlinear property of the mixer. The jamming signal was designed based on the channel leak and the jamming mechanism was analyzed in detail. Conclusion This kind of jamming signal can jam the sinusoidal FM fuzes effectively just depending on the jamming signal's feature itself. It's different from the traditional jamming way of simulating echo. Though the sinusoidal FM fuze was just analyzed, the principle is applicable to all FM fuzes. At the same time, it may be used as the reference for FM radar and communication countermeasures.展开更多
In order to analyze the electrostatic field concerned with electrostatic proximity fuze problem using the available finite analysis software package, the technology to model the problem with a scale reduction object a...In order to analyze the electrostatic field concerned with electrostatic proximity fuze problem using the available finite analysis software package, the technology to model the problem with a scale reduction object and boundary was presented. The boundary is determined by the maximum distance the sensor can detect. The object model is obtained by multiplying the terms in Poisson's equation with a scale reduction factor and the real value can be reconstructed with the same reverse process after software calculation. Using the finite element analysis program, the simulation value is close to the theoretical value with a little error. The boundary determination and scale reduction method is suitable to modeling the irregular electrostatic field around air targets, such as airplane, missile and so on, which is based on commonly used personal computer (PC). The technology reduces the calculation and storage cost greatly.展开更多
For establishing the equation of the capacitive target detection accurately, the distributing characteristics of the charges on the bomb body with capacitance fuze were explored. Continuous charges were analyzed disp...For establishing the equation of the capacitive target detection accurately, the distributing characteristics of the charges on the bomb body with capacitance fuze were explored. Continuous charges were analyzed dispersively. Based on the Coulomb's law, the dynamic equilibrium equations of the inducing charges on the bomb body were set up. For the four cases of d 0/L (the ratio between the electrode distance and the bomb length), the curves of the charge's distribution were given. It was concluded that: ① the charge density decreases steadily from the end near the frontal electrode to the bomb tail; ② the declining rate of the density is governed by d 0/L , the larger the value of d 0/L ,the higher the declining rate, and vice versa.展开更多
In view of drastic possible changes in fuze environment tempera- ture,a kind of temperature autocompensated detecting circuit for the capaci- tance fuze is proposed.It provides a steady detected output when the envi- ...In view of drastic possible changes in fuze environment tempera- ture,a kind of temperature autocompensated detecting circuit for the capaci- tance fuze is proposed.It provides a steady detected output when the envi- ronment temperature varies from-50℃ to 65℃ and keeps a stable detecting sensitivity.Based on an analysis of the circuit,influence of the major param- eters of the oscillating circuit on the amplitude are explored.A few impor- tant controllable parameters affecting the circuit feature are found out.A parameter-control method is given in order to improve the circuit perfor- mance.展开更多
The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kind...The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kinds of hardware platform structures of the software radio fuze are studied and the key techniques are analysed. The software radio fuze will become the most promising radio fuze techniques in 21st century.展开更多
On the basis of analysing the reliability problems existing in the general design of a kind of multioption fuze. some problems such as the reliability model. the reliability distribution of the electronic part of the ...On the basis of analysing the reliability problems existing in the general design of a kind of multioption fuze. some problems such as the reliability model. the reliability distribution of the electronic part of the fuze are discussed. For a particular multioption fuze, then.according to three different setting ways. the calculating methods of its operating reliability in six different operating states are given.展开更多
For a detector in a capacitanee fuze working in an electrostatic field, the bomblength (effective length of the conductor part) is an important factor affecting the sensitivityof detection. For the two different kinds...For a detector in a capacitanee fuze working in an electrostatic field, the bomblength (effective length of the conductor part) is an important factor affecting the sensitivityof detection. For the two different kinds of detecting circuit models in general use (the frequency-sensitive and the amplitude-coupling ), mechanism of the effect of bomblength on the sensitvity of detection is analyzed. Through the analysis a conclusion in fullagreement with experimental results has been drawn, that is. the longer the bomb length,the higher the sensitivity, on the condition that the sizes and the sites of the detecting electrodes and bomb diameter remain unchanged.展开更多
Presents a series of new concepts and design ideas about the fuze safety system, establishing thereby a proposed theory and relevant mathematical descriptions. The basic the- ory indicates that any fuze safety system ...Presents a series of new concepts and design ideas about the fuze safety system, establishing thereby a proposed theory and relevant mathematical descriptions. The basic the- ory indicates that any fuze safety system is a physical system comprising finite safety ele- ments each of which can independently affect the system's states, and the arming process is a dynamic one in which the extent of safety of the system changes only gradually. The theory and method can be used to analyse the arming process and to guide the development of fuze safety systems.展开更多
基金the National Key Research and Development Program of China(No.2022YFC3601400)。
文摘Frequency-modulated continuous-wave radar enables the non-contact and privacy-preserving recognition of human behavior.However,the accuracy of behavior recognition is directly influenced by the spatial relationship between human posture and the radar.To address the issue of low accuracy in behavior recognition when the human body is not directly facing the radar,a method combining local outlier factor with Doppler information is proposed for the correction of multi-classifier recognition results.Initially,the information such as distance,velocity,and micro-Doppler spectrogram of the target is obtained using the fast Fourier transform and histogram of oriented gradients-support vector machine methods,followed by preliminary recognition.Subsequently,Platt scaling is employed to transform recognition results into confidence scores,and finally,the Doppler-local outlier factor method is utilized to calibrate the confidence scores,with the highest confidence classifier result considered as the recognition outcome.Experimental results demonstrate that this approach achieves an average recognition accuracy of 96.23%for comprehensive human behavior recognition in various orientations.
基金Project supported by the Special Funds for the Projects of Basic Scientific Research and Operating Expenses of the Central Universities, Northwest University for Nationalities, China (Grant No. zyz2012103)the National Natural Science Foundation of China (Grant Nos. 11044007 and 11064013)
文摘By using the B-spline expansion technique and a model potential of the alkali atoms, the properties of frequency- modulated excitation of Rydberg potassium atoms in a static electric field and a microwave field are investigated by using the time-dependent two-level approach. We successfully reproduce the square wave oscillations in the low frequency, the stair step population oscillations in the intermediate frequency, and the multiphoton transitions in the high frequency with respect to the unmodulated Rabi frequency, which have been observed experimentally by Noel et al. [Phys. Rev. A 58 2265 （1998）]. Furthermore, we also numerically obtain the discretized Rabi oscillations predicted in the Landau Zener accumulation model.
文摘A technique for measuring the linearity of a linearly frequency-modulated continuous wave (LFM-CW) signal is presented. It uses a delay-line and a mixer to sense the slope of the output of a sweep oscillator, so that the original form of frequency function deviated from idealized linear slope is retrieved by means of spectrum analysis. Consequently,the linearity of the LFM signal is determined. The formulation is performed based on the principle that an angle-modulated signal can be approximated by an amplitude-modulated signal if the modulation coefficient is sufficiently small. To examine the validity of the procedure and to study the effect of each parameter on the accuracy of measurement, a number of computer simulations has been made. The results of simulation show that the error of the measurement is less than 2%.
文摘Multi-rotor aircraft has great potential in urban traffic and military use and its noise problem has attracted more attention recently.Multi-rotor aircrafts are typically controlled by changing the rotation speeds of the rotors.To reduce the noise of multiple frequency-modulated rotors,a global noise attenuation method is proposed in this study.First,the fast prediction method is used to estimate the global noise of the multirotor with different configurations online.Meanwhile,the sound field reproduction method is used to obtain the control signal of the loudspeaker array to achieve global noise attenuation.Then,the influence of array arrangement on noise reduction is analyzed in the acoustic modal domain,which reveals that different optimization models are needed to minimize the noise power or/and the noise pressure in some directions when the scale of the array is limited.Next,to improve the real-time performance of the system,the online calculation of the optimal control signal is transformed into the offline design of the optimal filter,which satisfies the target frequency-domain characteristics.Finally,the experimental results of the noise of a model quadrotor in the anechoic chamber were consistent with the predicted results.The simulation results of noise attenuation for the quadrotor show that the method proposed reduced the global noise power by about 13 dB.Moreover,the noise region radiated from the quadrotor to the ground with the boundary of 40 dB was reduced to 8.4%of that before control.
基金Project supported by the National Basic Research Program of China (Grant No. 2005CB724508)the Scientific Research Foundation of Jiangxi Provincial Department of Education,China (Grant No. GJJ10133)the Foundation of Talent of Jinggangof Jiangxi Province,China (Grant No. 2008DQ00400)
文摘We present an alternative scheme for implementing the unconventional geometric two-qubit phase gate and prepar- ing multiqubit entanglement by using a frequency-modulated laser field to simultaneously illuminate all ions. Selecting the index of modulation yields selective mechanisms for coupling and decoupling between the internal and the external states of the ions. By the selective mechanisms, we obtain the unconventional geometric two-qubit phase gate, multiparticle Greenberger-Horne-Zeilinger states and highly entangled cluster states. Our scheme is insensitive to the thermal motion of the ions.
基金the National Natural Science Foun-dation of China(Grant No.52375546)the National Key Research and Development Program of China(Grant No.2022YFF0705701).
文摘Laser absorption spectroscopy has proven to be an effective approach for gas sensing, which plays an important rolein the fields of military, industry, medicine and basic research. This paper presents a multiplexed gas sensing system basedon optical frequency comb (OFC) calibrated frequency-modulated continuous-wave (FMCW) tuning nonlinearity. Thesystem can be used for multi-parameter synchronous measurement of gas absorption spectrum and multiplexed opticalpath. Multi-channel parallel detection is realized by combining wavelength division multiplexing (WDM) and frequencydivision multiplexing (FDM) techniques. By introducing nonlinear optical crystals, broadband spectrum detection is simultaneouslyachieved over a bandwidth of hundreds of nanometers. An OFC with ultra-high frequency stability is used asthe frequency calibration source, which guarantees the measurement accuracy. The test samples involve H13C14N, C_(2)H_(2)and Rb vapor cells of varying densities and 5 parallel measurement experiments are designed. The results show that themeasurement accuracies of spectral absorption line and the optical path are 150 MHz and 20 m, respectively. The schemeoffers the advantages of multiplexed, multi-parameter, wide spectrum and high resolution detection, which can realize theidentification of multi-gas components and the high-precision inversion of absorption lines under different environments.The proposed sensor demonstrates great potential in the field of high-resolution absorption spectrum measurement for gassensing applications.
文摘Aim To get the theory base of designing FM fuze's jamming signal, its jamming mechanism was studied. Methods A sinusoidal FM fuze was analyzed in time domain and frequency domain and the concept of channel leak was presented. Results It was proved that information channel leak exists in FM fuze because of the nonlinear property of the mixer. The jamming signal was designed based on the channel leak and the jamming mechanism was analyzed in detail. Conclusion This kind of jamming signal can jam the sinusoidal FM fuzes effectively just depending on the jamming signal's feature itself. It's different from the traditional jamming way of simulating echo. Though the sinusoidal FM fuze was just analyzed, the principle is applicable to all FM fuzes. At the same time, it may be used as the reference for FM radar and communication countermeasures.
文摘In order to analyze the electrostatic field concerned with electrostatic proximity fuze problem using the available finite analysis software package, the technology to model the problem with a scale reduction object and boundary was presented. The boundary is determined by the maximum distance the sensor can detect. The object model is obtained by multiplying the terms in Poisson's equation with a scale reduction factor and the real value can be reconstructed with the same reverse process after software calculation. Using the finite element analysis program, the simulation value is close to the theoretical value with a little error. The boundary determination and scale reduction method is suitable to modeling the irregular electrostatic field around air targets, such as airplane, missile and so on, which is based on commonly used personal computer (PC). The technology reduces the calculation and storage cost greatly.
文摘For establishing the equation of the capacitive target detection accurately, the distributing characteristics of the charges on the bomb body with capacitance fuze were explored. Continuous charges were analyzed dispersively. Based on the Coulomb's law, the dynamic equilibrium equations of the inducing charges on the bomb body were set up. For the four cases of d 0/L (the ratio between the electrode distance and the bomb length), the curves of the charge's distribution were given. It was concluded that: ① the charge density decreases steadily from the end near the frontal electrode to the bomb tail; ② the declining rate of the density is governed by d 0/L , the larger the value of d 0/L ,the higher the declining rate, and vice versa.
文摘In view of drastic possible changes in fuze environment tempera- ture,a kind of temperature autocompensated detecting circuit for the capaci- tance fuze is proposed.It provides a steady detected output when the envi- ronment temperature varies from-50℃ to 65℃ and keeps a stable detecting sensitivity.Based on an analysis of the circuit,influence of the major param- eters of the oscillating circuit on the amplitude are explored.A few impor- tant controllable parameters affecting the circuit feature are found out.A parameter-control method is given in order to improve the circuit perfor- mance.
文摘The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kinds of hardware platform structures of the software radio fuze are studied and the key techniques are analysed. The software radio fuze will become the most promising radio fuze techniques in 21st century.
文摘On the basis of analysing the reliability problems existing in the general design of a kind of multioption fuze. some problems such as the reliability model. the reliability distribution of the electronic part of the fuze are discussed. For a particular multioption fuze, then.according to three different setting ways. the calculating methods of its operating reliability in six different operating states are given.
文摘For a detector in a capacitanee fuze working in an electrostatic field, the bomblength (effective length of the conductor part) is an important factor affecting the sensitivityof detection. For the two different kinds of detecting circuit models in general use (the frequency-sensitive and the amplitude-coupling ), mechanism of the effect of bomblength on the sensitvity of detection is analyzed. Through the analysis a conclusion in fullagreement with experimental results has been drawn, that is. the longer the bomb length,the higher the sensitivity, on the condition that the sizes and the sites of the detecting electrodes and bomb diameter remain unchanged.
文摘Presents a series of new concepts and design ideas about the fuze safety system, establishing thereby a proposed theory and relevant mathematical descriptions. The basic the- ory indicates that any fuze safety system is a physical system comprising finite safety ele- ments each of which can independently affect the system's states, and the arming process is a dynamic one in which the extent of safety of the system changes only gradually. The theory and method can be used to analyse the arming process and to guide the development of fuze safety systems.
