A new flame detector with one ultraviolet and two infrared detectors is designed. The ultraviolet detector is of rapid response(≤10 μs) while the two infrared detectors usually have a response time of more than 5 ms...A new flame detector with one ultraviolet and two infrared detectors is designed. The ultraviolet detector is of rapid response(≤10 μs) while the two infrared detectors usually have a response time of more than 5 ms. The ultraviolet detector is applied to deal with the flame of large scales. When facing the flame of mid or small scales, the three detectors cooperate. Employing the high-order derivatives of the sample data of the infrared circuits to improve the sensitivity, the response speed is greatly improved. The data of the temperature sensor is used to adjust circuit parameters in real time, thus reducing the effect of temperature drift. The flame detectors are tested at different distances and the response time is as rapid as 0.65 ms. The test results show that the new flame detector has the characteristics of high speed and a low rate of false alarms.展开更多
The variation among Chinese genotypes of Brassica napus L. for seed tocopherols content and their analysis using gas chromatography has not been comprehensively reported till to date. In the present study, the tocophe...The variation among Chinese genotypes of Brassica napus L. for seed tocopherols content and their analysis using gas chromatography has not been comprehensively reported till to date. In the present study, the tocopherol contents of four Chinese genotypes of Brassica napus L., namely, Gaoyou 605, Zhejiang 619, Zheshuang 758, and Zheshuang 72, were evaluated using three modified sample preparation protocols （P1, P2, and P3） for tocopherol extraction. These methods were distinguished as follows. Protocol one （P1） included the evaporation of solvent after extraction without silylation. Protocol two （P2） followed the direct supernatant collection after overnight extraction without drying and silylation. Protocol three （P3） included trimethylsilylation with N,O-bis（trimethylsilyl） trifluoroacetamide. Genotypic comparison of tocopherol and its isoforms revealed that Gaoyou 605 was dominant over the other genotypes with （140.5＋ 10.5）, （316.2＋ 9.2）, and （559.1＋ 24.3） ~tg g-~ of seed meal ct-, 7-, and total （T-） tocopherol, respectively, and a 0.44＋0.04 ^- to 7-tocopherol ratio. The comparison of the sample preparation protocols, on the other hand, suggests that P3 is the most suitable method for the tocopherol extraction from Brassica oilseeds and for the analysis of tocopherols using gas chromatography flame ionization detector （GC-FID）. Trimethylsilylation is the key step differentiating P3 from P1 and P2. Variations detected in tocopherol contents among the Chinese rapeseed （B. napus） genotypes signify the need to quantify a wide range of rapeseed germplasm for seed tocopherol dynamics in short and crop improvement in long.展开更多
A new detection system consisted of a flame ionization detector（FID） and a sulfur chemiluminescence detector（SCD） was developed for sensitive and interference free determination of total sulfur in natural gas by n...A new detection system consisted of a flame ionization detector（FID） and a sulfur chemiluminescence detector（SCD） was developed for sensitive and interference free determination of total sulfur in natural gas by non-separation gas chromatography. In this system, sulfur containing compounds and hydrocarbons were firstly burned in the FID using oxygen rich flame and converted to SO_2, CO_2 and H_2O, respectively. The products from FID were transported into the SCD with hydrogen rich atmosphere wherein only SO_2 could be reduced to SO and reacted with O_3 to produce characteristic chemiluminescence. Therefore, the chemiluminescence of CO found in conventional SCD were eliminated because CO_2 could not be reduced to CO under these conditions. The experimental parameters were systematically investigated. Limit of detection obtained by the proposed system is better than 0.5 mmol/mol for total sulfur and superior to those previously reported. The proposed method not only retains the advantages of the conventional SCD but also provides several unique advantages including no hydrocarbon interference, better stability, and easier calculation. The utility of this technique was demonstrated by the determination of total sulfur in real samples and two certified reference materials（GBW 06332 and GBW（E） 061320）.展开更多
A new analytical method for detecting butyltin in seawater is presented. In this method, the solid phase microextraction technique for pretreatment of the butyltin compound was used and a new type Flame Photometric De...A new analytical method for detecting butyltin in seawater is presented. In this method, the solid phase microextraction technique for pretreatment of the butyltin compound was used and a new type Flame Photometric Detector (FPD) was designed. Use of this method to determine the butyltin contents in Qingdao coast seawater yielded convincing results.展开更多
基金Project of Special Zone for National Defense Science and Technology Innovation(No.Y7GW04C001)
文摘A new flame detector with one ultraviolet and two infrared detectors is designed. The ultraviolet detector is of rapid response(≤10 μs) while the two infrared detectors usually have a response time of more than 5 ms. The ultraviolet detector is applied to deal with the flame of large scales. When facing the flame of mid or small scales, the three detectors cooperate. Employing the high-order derivatives of the sample data of the infrared circuits to improve the sensitivity, the response speed is greatly improved. The data of the temperature sensor is used to adjust circuit parameters in real time, thus reducing the effect of temperature drift. The flame detectors are tested at different distances and the response time is as rapid as 0.65 ms. The test results show that the new flame detector has the characteristics of high speed and a low rate of false alarms.
基金supported by the National Natural Science Foundation of China (30971700 and 31171463)Natural Science Foundation of Zhejiang Province (Z3100130)
文摘The variation among Chinese genotypes of Brassica napus L. for seed tocopherols content and their analysis using gas chromatography has not been comprehensively reported till to date. In the present study, the tocopherol contents of four Chinese genotypes of Brassica napus L., namely, Gaoyou 605, Zhejiang 619, Zheshuang 758, and Zheshuang 72, were evaluated using three modified sample preparation protocols （P1, P2, and P3） for tocopherol extraction. These methods were distinguished as follows. Protocol one （P1） included the evaporation of solvent after extraction without silylation. Protocol two （P2） followed the direct supernatant collection after overnight extraction without drying and silylation. Protocol three （P3） included trimethylsilylation with N,O-bis（trimethylsilyl） trifluoroacetamide. Genotypic comparison of tocopherol and its isoforms revealed that Gaoyou 605 was dominant over the other genotypes with （140.5＋ 10.5）, （316.2＋ 9.2）, and （559.1＋ 24.3） ~tg g-~ of seed meal ct-, 7-, and total （T-） tocopherol, respectively, and a 0.44＋0.04 ^- to 7-tocopherol ratio. The comparison of the sample preparation protocols, on the other hand, suggests that P3 is the most suitable method for the tocopherol extraction from Brassica oilseeds and for the analysis of tocopherols using gas chromatography flame ionization detector （GC-FID）. Trimethylsilylation is the key step differentiating P3 from P1 and P2. Variations detected in tocopherol contents among the Chinese rapeseed （B. napus） genotypes signify the need to quantify a wide range of rapeseed germplasm for seed tocopherol dynamics in short and crop improvement in long.
基金the National Science and Technology Supporting Plan(No.2013BAK12B04)for financial support
文摘A new detection system consisted of a flame ionization detector（FID） and a sulfur chemiluminescence detector（SCD） was developed for sensitive and interference free determination of total sulfur in natural gas by non-separation gas chromatography. In this system, sulfur containing compounds and hydrocarbons were firstly burned in the FID using oxygen rich flame and converted to SO_2, CO_2 and H_2O, respectively. The products from FID were transported into the SCD with hydrogen rich atmosphere wherein only SO_2 could be reduced to SO and reacted with O_3 to produce characteristic chemiluminescence. Therefore, the chemiluminescence of CO found in conventional SCD were eliminated because CO_2 could not be reduced to CO under these conditions. The experimental parameters were systematically investigated. Limit of detection obtained by the proposed system is better than 0.5 mmol/mol for total sulfur and superior to those previously reported. The proposed method not only retains the advantages of the conventional SCD but also provides several unique advantages including no hydrocarbon interference, better stability, and easier calculation. The utility of this technique was demonstrated by the determination of total sulfur in real samples and two certified reference materials（GBW 06332 and GBW（E） 061320）.
文摘A new analytical method for detecting butyltin in seawater is presented. In this method, the solid phase microextraction technique for pretreatment of the butyltin compound was used and a new type Flame Photometric Detector (FPD) was designed. Use of this method to determine the butyltin contents in Qingdao coast seawater yielded convincing results.
