A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise...A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise. Like many low phase noise oscillators, a cavity magnonic oscillator faces the challenge that its narrow resonance profile is not well suited for injection locking amplification. This work presents an improved design for such an oscillator configured as an injection locking amplifier(ILA) with an extended lock range. The proposed design features a two-stage architecture, consisting of a pre-amplification oscillator and a cavity magnonic oscillator, separated by an isolator to prevent backward locking.By optimizing the circuit parameters of each stage, the proposed design achieved an order of magnitude increase in lock range, when compared to its predecessors, all while preserving the phase noise quality of the input, making it well-suited for narrowband, sensitive signal amplification. Furthermore, this work provides a method for using oscillators with high spectral purity as injection locking amplifiers.展开更多
As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from di...As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from different studies,this study constructs a refined block model(including Qilian,Alxa,Ordos,Xining,Haiyuan,and Lanzhou blocks)and uses the grid search and simulated annealing methods to invert GPS data for slip rate and locking degree of the Haiyuan fault zone.The results are as follows:(1)The sinistral slip rates in the western,middle,and eastern segments are 4.93-5.22 mm/a,1.52-4.94 mm/a,and 0.43-1.18 mm/a,decreasing eastward on the whole,while the compression rates are 0.45-1.26 mm/a,0.58-2.62 mm/a,and3.52-4.48 mm/a,increasing eastward on the whole.(2)The locking depth of the western segment increases from about 5 km to about 20 km eastward;the middle segment decreases and then increases eastward;the eastern segment concentrates at about 20 km(PHI is about 0.86).(3)The slip deficit is relatively higher in the Lenglongling,Jinqianghe,Maomaoshan,and Liupanshan faults(averaging about 3.42 mm/a,4.16 mm/a,4.23 mm/a,and 3.43 mm/a within 20 km).(4)The Qilian,Alxa,Xining,Lanzhou,and Haiyuan blocks rotate clockwise,while the Ordos block rotates counterclockwise.Additionally,by comparing different block models,the Haiyuan block should be considered independently.The Haiyuan fault zone adjusts surrounding block movements and uplifts Liupanshan mountain tectonically.The results can provide important references for understanding the regional earthquake risk and deformation mechanism.展开更多
BACKGROUND Proximal humerus fractures(PHFs)are common,especially in the elderly,and optimal surgical management remains debated.This study compares clinical,functional,and radiographic outcomes of deltoid split(DS)vs ...BACKGROUND Proximal humerus fractures(PHFs)are common,especially in the elderly,and optimal surgical management remains debated.This study compares clinical,functional,and radiographic outcomes of deltoid split(DS)vs deltopectoral(DP)approaches in PHFs treated with locking plates.AIM To evaluate and compare the clinical,functional,and radiographic outcomes-as well as postoperative complication rates-associated with the DS vs the DP surgical approach in the open reduction and internal fixation(ORIF)of PHFs using locking plate constructs.METHODS A multicenter retrospective study of 120 patients undergoing ORIF for closed Neer type II-IV PHFs between January 2023 and December 2023.Patients were grouped by surgical approach[DS(n=70),DP(n=50)].Outcome measures included Numeric Rating Scale(NRS)for pain,Quick-Disabilities in Arm,Shoulder,and Hand questionnaire(QuickDASH),Constant-Murley score,Short Form Health Survey-12v2,and radiographic alignment.Complication rates were recorded.Statistical significance was defined as P<0.05.RESULTS Early outcomes favored the DS group:(1)Lower NRS(3.1 vs 5.9);(2)Higher Constant-Murley(68.2 vs 50.5);and(3)Better QuickDASH(25.4 vs 37.1).Complication rate was lower in the DS group(1.66%vs 5.81%).Radiographic outcomes were comparable.Long-term results were similar between groups.CONCLUSION While both approaches yield satisfactory long-term outcomes,the DS approach is associated with faster early recovery and fewer complications,supporting its use in selected cases.展开更多
Fiber optic sensing technology,with its low transmission loss,wide bandwidth,and broad dynamic range,offers significant advantages for high-sensitivity measurements.In this study,a multi-band soliton modulation system...Fiber optic sensing technology,with its low transmission loss,wide bandwidth,and broad dynamic range,offers significant advantages for high-sensitivity measurements.In this study,a multi-band soliton modulation system for stress sensing is proposed,utilizing Ti_(3)C_(2)T_(x)to generate ultrashort pulses.By applying stress to microfibers,dichromatic periodic multisoliton mode-locking at 1530 nm and 1555.2 nm is achieved.Vibrational mechanical stress further modulates cross-phase interactions between solitons,inducing higher-order bound solitons with small-amplitude oscillations.These dynamic processes reveal complex nonlinear optical behaviors and enhance sensing capabilities.Additionally,the feasibility of stable mode-locking of Ti_(3)C_(2)T_(x)in a 1µm multimode cavity is analyzed using the multimode nonlinear Schrodinger equation,and multisoliton states are experimentally demonstrated by integrating a 1µm narrow-linewidth ultrafast multimode laser with a stressed microfiber.展开更多
In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement with...In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement without complete failure,culminating in a collapse in October 2018.The mechanisms behind its resistance to failure despite substantial deformation and the influence of the complex geo-structure within the tectonic mélange belt remain unclear.To address these questions,this study utilized a multidisciplinary approach,integrating on-site geological field mapping,surface deformation monitoring,multielectrode resistivity method,and deep displacement analysis.The aim was to evaluate the impact of the intricate geo-structure within the tectonic mélange belt on the Baige landslide events.Findings reveal that the landslide's geo-structure consists of structurally fractured,mesh-like rock masses,including heterogeneous lenticular rock masses and intermittent brittle shear zones distributed around the lens-shaped rock masses.The study underscores that the inhomogeneous and weakly deformed lenticular rock masses function as natural locked segments,governing the stability of the Baige landslide.Specifically,the relatively intact and hard granodiorite porphyry play a crucial role in locking the landslide's deformation.Deep displacement analysis indicates that the brittle shear zones act as the sliding surfaces.The progressive destruction of the locked segments and the gradual penetration of brittle shear zones,driven by gravitational potential energy,contribute to the landslide occurrence.This research provides critical insights into the formation mechanisms of large-scale landslides within tectonic mélange belts.展开更多
Spin-momentum locking is widely regarded as an inherent property of evanescent waves,where the transverse spin angular momentum is intrinsically tied to the wave's polarization.This principle is well established i...Spin-momentum locking is widely regarded as an inherent property of evanescent waves,where the transverse spin angular momentum is intrinsically tied to the wave's polarization.This principle is well established in systems such as surface plasmon polaritons,surface elastic waves,and other evanescent modes.Here,we theoretically unveil an anomalous breakdown of spin-momentum locking in evanescent electromagnetic waves at a metalgyromagnetic interface.We show that the hybrid polarization of the field induces two successive reversals of transverse spin near the interface—directly violating the conventional locking between spin and momentum.As a result,identical chiral sources placed at different heights above the interface excite evanescent waves propagating in opposite directions,defying standard expectations.This discovery challenges the presumed universality of spin-momentum locking and opens new degrees of freedom for controlling wave propagation in photonic and plasmonic systems.展开更多
随着电力系统的发展,现行的IEC 60372"Locking devices for ball and socket couplings of string insulator units:Dimensions and tests"(Third edition)1984版已经无法涵盖和适应新的特高压大吨位绝缘子产品和技术的发展,...随着电力系统的发展,现行的IEC 60372"Locking devices for ball and socket couplings of string insulator units:Dimensions and tests"(Third edition)1984版已经无法涵盖和适应新的特高压大吨位绝缘子产品和技术的发展,包括对应于36和40两种新的联接标记的更高强度等级的绝缘子。笔者介绍了IEC TC36/MT21工作组维护IEC 60372标准的主要内容:包括结合国际工程实践经验,将已经被广泛应用的36、40两个联接标记加入到本标准中;研究是否增加锁紧销操作试验项目;研究并修改了原标准中L2和L5错误的问题;解决了28BW型锁紧销是否在本次修订中纳入标准的问题等。展开更多
Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. ...Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. A finite element analysis （FEA） model defining more than 300 contact pairs for long nut-short screw locking mechanism of a large-scale vertical gear-rack typed ship-lift was built. Using augmented Lagrange method and symmetry algorithm of contact element stiffness, the FEA model was analyzed, and the contact stress of contact interfaces and the von Mises stress of key parts were obtained. The results show that the design of the locking mechanism meets the requirement of engineering, and this method is effective for solving large stole nonlinear contact pairs.展开更多
To predict the attitude of satellite during the whole deployment process and evaluate the locking impact, a numerical flexible model of a certain satellite associated with four flexible honeycomb solar panels was esta...To predict the attitude of satellite during the whole deployment process and evaluate the locking impact, a numerical flexible model of a certain satellite associated with four flexible honeycomb solar panels was established. The flexible solar panel was modeled by the finite element analysis (FEA), and the motion equations were derived by Lagrangian formulation. The locking process was based on the method of Hertzian contact, which enables one to predict the locking impact on the satellite and the subsequent oscillation of solar panels. The results reveal that locking operation has great impact on the attitude of the satellite, and the angular acceleration of satellite reaches 22.03°/s2 at the locking moment; the flexible solar panels model is feasible to predict the accurate response of the satellite during deployment and the oscillation of solar panels; the instantly impulsive force occurred during locking process is about 1.5 kN and the changing time is nearly 0.32 s. It provides an effective approach to present the flexible solar panels' deployment process and evaluate the locking impact.展开更多
AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necess...AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necessitate 6 wk wrist immobilisation.METHODS A prospective,randomised controlled single-centre trial was conducted with 56 patients who had a displaced radius fracture were randomised to treatment either with a volar locking plate(n=29),or another treatment modality(n=27;cast immobilisation with or without wires or external fixator).Outcomes were measured at 12 wk.Functional outcome scores measured were the Patient-Rated Wrist Evaluation(PRWE)Score;Disabilities of the Arm,Shoulder and Hand and activities of daily living(ADLs).Clinical outcomes were wrist range of motion and grip strength.Radiographic parameters were volar inclination and ulnar variance.RESULTS Patients in the volar locking plate group had significantly better PRWE scores,ADL scores,grip strength and range of extension at three months compared with the control group.All radiological parameters were significantly better in the volar locking plate group at 3 mo.CONCLUSION The present study suggests that volar locking plates produced significantly better functional and clinical outcomes at 3 mo compared with other treatment modalities.Anatomical reduction was significantly more likely to be preserved in the plating group.Level of evidence:Ⅱ.展开更多
Complex tibial plateau fractures can seriously affect quality of life and physical and mental health of patients.The anatomical relationship between the proximal tibial bone and soft tissue is complex,resulting in dif...Complex tibial plateau fractures can seriously affect quality of life and physical and mental health of patients.The anatomical relationship between the proximal tibial bone and soft tissue is complex,resulting in different types of tibial plateau fractures.Violent trauma can lead to displaced fracture,serious soft tissue injury,and potentially,dislocation of the knee joint.Therefore,tibial plateau fractures are extremely unstable.AIM To assess the use of locking compression plate(LCP)+T-type steel plate for postoperative weight bearing and functional recovery of complex tibial plateau fractures.METHODS Ninety-seven patients with complex tibial plateau fractures who underwent surgery at our hospital were selected for retrospective study.Forty-nine patients had been treated with LCP+T-type steel plate limited internal fixation(study group),and 48 patients with bilateral ordinary steel plate support(control group).The operation process index,postoperative rehabilitation related index,Rasmussen score of the knee joint,tibial plateau varus angle(TPA),tibial plateau retroversion angle(PA),and surgical complications of the two groups were compared.RESULTS The operation time and intraoperative bone graft volume in the study group were lower than those in the control group(P<0.05).There were no significant differences in surgical bleeding,anterior external incision length,postoperative drainage,hospital stay duration,and fracture healing time between the groups(P>0.05).There was no significant difference in the TPA and PA angle between the groups immediately and 18 mo after surgery(P>0.05).At 12 mo after surgery,the Rasmussen scale score was higher in the study group than in the control group(P<0.05).There was no significant difference in the Rasmussen scale score at 18 mo after surgery,and the radiology score at 12 and 18 mo after surgery,between the two groups(P>0.05).The postoperative complication rate in the study group(3.77%)was lower than that in the control group(15.09%;P<0.05).CONCLUSION LCP+T-type steel plate internal fixation has advantages in terms of minimizing trauma and enabling early postoperative functional exercise,promoting functional recovery and lower limb weight-bearing,and reducing postoperative complications.展开更多
We present a laser frequency locking to Rydberg transition with electromagnetically induced transparency（EIT）spectra in a room-temperature cesium vapor cell. Cesium levels 6S_（1/2）, 6P_（3/2）, and the n D_（5/2）...We present a laser frequency locking to Rydberg transition with electromagnetically induced transparency（EIT）spectra in a room-temperature cesium vapor cell. Cesium levels 6S_（1/2）, 6P_（3/2）, and the n D_（5/2） state, compose a cascade three-level system, where a coupling laser drives Rydberg transition, and probe laser detects the EIT signal. The error signal, obtained by demodulating the EIT signal, is used to lock the coupling laser frequency to Rydberg transition. The laser frequency fluctuation, ~0.7 MHz, is obtained after locking on, with the minimum Allan variance to be 8.9 × 10^（-11）.This kind of locking method can be used to stabilize the laser frequency to the excited transition.展开更多
AIM: To review the results of our experience with the Medartis Aptus plating system for four corner arthrodesis of the wrist, which uses a combination of compression screws and variable angle locking screws.METHODS: W...AIM: To review the results of our experience with the Medartis Aptus plating system for four corner arthrodesis of the wrist, which uses a combination of compression screws and variable angle locking screws.METHODS: We reviewed the results of 17 procedures in 16 patients that underwent scaphoid excision and four corner fusion using the Medartis Aptus system between May 2010 and June 2014. The primary outcome measure was radiographic and clinical union. RESULTS: The mean clinical follow up time was 20.6 mo. The mean union time was 6 mo. Two non-unions required revision procedures. The mean disabilities of the arm, shoulder and hand score taken after union was 36. The mean final grip strength was 27 kg. The mean final range of movement was 30° flexion and 31° of extension. All patients had a restored scapholunate angle on postoperative radiographs. There were no incidences of dorsal impingement.CONCLUSION: Overall our experience with the Aptus plating system shows comparable results to other methods of fixation for four corner fusion, in the short to medium term.展开更多
基金funded by NSERC Discovery Grants, NSERC Discovery Accelerator Supplements, Innovation Proof-of-Concept Grant of Research Manitoba, and Faculty of Science Research Innovation and Commercialization Grant of University of Manitoba (C.-M.H.)。
文摘A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise. Like many low phase noise oscillators, a cavity magnonic oscillator faces the challenge that its narrow resonance profile is not well suited for injection locking amplification. This work presents an improved design for such an oscillator configured as an injection locking amplifier(ILA) with an extended lock range. The proposed design features a two-stage architecture, consisting of a pre-amplification oscillator and a cavity magnonic oscillator, separated by an isolator to prevent backward locking.By optimizing the circuit parameters of each stage, the proposed design achieved an order of magnitude increase in lock range, when compared to its predecessors, all while preserving the phase noise quality of the input, making it well-suited for narrowband, sensitive signal amplification. Furthermore, this work provides a method for using oscillators with high spectral purity as injection locking amplifiers.
基金supported by the National Natural Science Foundation of China(42474003,42074007)the Fundamental Research Funds for the Central Universities(2042023kfyq01)。
文摘As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from different studies,this study constructs a refined block model(including Qilian,Alxa,Ordos,Xining,Haiyuan,and Lanzhou blocks)and uses the grid search and simulated annealing methods to invert GPS data for slip rate and locking degree of the Haiyuan fault zone.The results are as follows:(1)The sinistral slip rates in the western,middle,and eastern segments are 4.93-5.22 mm/a,1.52-4.94 mm/a,and 0.43-1.18 mm/a,decreasing eastward on the whole,while the compression rates are 0.45-1.26 mm/a,0.58-2.62 mm/a,and3.52-4.48 mm/a,increasing eastward on the whole.(2)The locking depth of the western segment increases from about 5 km to about 20 km eastward;the middle segment decreases and then increases eastward;the eastern segment concentrates at about 20 km(PHI is about 0.86).(3)The slip deficit is relatively higher in the Lenglongling,Jinqianghe,Maomaoshan,and Liupanshan faults(averaging about 3.42 mm/a,4.16 mm/a,4.23 mm/a,and 3.43 mm/a within 20 km).(4)The Qilian,Alxa,Xining,Lanzhou,and Haiyuan blocks rotate clockwise,while the Ordos block rotates counterclockwise.Additionally,by comparing different block models,the Haiyuan block should be considered independently.The Haiyuan fault zone adjusts surrounding block movements and uplifts Liupanshan mountain tectonically.The results can provide important references for understanding the regional earthquake risk and deformation mechanism.
文摘BACKGROUND Proximal humerus fractures(PHFs)are common,especially in the elderly,and optimal surgical management remains debated.This study compares clinical,functional,and radiographic outcomes of deltoid split(DS)vs deltopectoral(DP)approaches in PHFs treated with locking plates.AIM To evaluate and compare the clinical,functional,and radiographic outcomes-as well as postoperative complication rates-associated with the DS vs the DP surgical approach in the open reduction and internal fixation(ORIF)of PHFs using locking plate constructs.METHODS A multicenter retrospective study of 120 patients undergoing ORIF for closed Neer type II-IV PHFs between January 2023 and December 2023.Patients were grouped by surgical approach[DS(n=70),DP(n=50)].Outcome measures included Numeric Rating Scale(NRS)for pain,Quick-Disabilities in Arm,Shoulder,and Hand questionnaire(QuickDASH),Constant-Murley score,Short Form Health Survey-12v2,and radiographic alignment.Complication rates were recorded.Statistical significance was defined as P<0.05.RESULTS Early outcomes favored the DS group:(1)Lower NRS(3.1 vs 5.9);(2)Higher Constant-Murley(68.2 vs 50.5);and(3)Better QuickDASH(25.4 vs 37.1).Complication rate was lower in the DS group(1.66%vs 5.81%).Radiographic outcomes were comparable.Long-term results were similar between groups.CONCLUSION While both approaches yield satisfactory long-term outcomes,the DS approach is associated with faster early recovery and fewer complications,supporting its use in selected cases.
基金supported by the National Natural Science Foundation of China(Grant Nos.12275240,12261131495,and 12475008)the Natural Science Foundation of Zhejiang Province(Grant No.LY24A050002).
文摘Fiber optic sensing technology,with its low transmission loss,wide bandwidth,and broad dynamic range,offers significant advantages for high-sensitivity measurements.In this study,a multi-band soliton modulation system for stress sensing is proposed,utilizing Ti_(3)C_(2)T_(x)to generate ultrashort pulses.By applying stress to microfibers,dichromatic periodic multisoliton mode-locking at 1530 nm and 1555.2 nm is achieved.Vibrational mechanical stress further modulates cross-phase interactions between solitons,inducing higher-order bound solitons with small-amplitude oscillations.These dynamic processes reveal complex nonlinear optical behaviors and enhance sensing capabilities.Additionally,the feasibility of stable mode-locking of Ti_(3)C_(2)T_(x)in a 1µm multimode cavity is analyzed using the multimode nonlinear Schrodinger equation,and multisoliton states are experimentally demonstrated by integrating a 1µm narrow-linewidth ultrafast multimode laser with a stressed microfiber.
基金supported by the National Major Scientific Instruments and Equipment Development Projects of China(No.41827808)the Major Program of the National Natural Science Foundation of China(No.42090055)Supported by Science and Technology Projects of Xizang Autonomous Region,China(No.XZ202402ZD0001)。
文摘In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement without complete failure,culminating in a collapse in October 2018.The mechanisms behind its resistance to failure despite substantial deformation and the influence of the complex geo-structure within the tectonic mélange belt remain unclear.To address these questions,this study utilized a multidisciplinary approach,integrating on-site geological field mapping,surface deformation monitoring,multielectrode resistivity method,and deep displacement analysis.The aim was to evaluate the impact of the intricate geo-structure within the tectonic mélange belt on the Baige landslide events.Findings reveal that the landslide's geo-structure consists of structurally fractured,mesh-like rock masses,including heterogeneous lenticular rock masses and intermittent brittle shear zones distributed around the lens-shaped rock masses.The study underscores that the inhomogeneous and weakly deformed lenticular rock masses function as natural locked segments,governing the stability of the Baige landslide.Specifically,the relatively intact and hard granodiorite porphyry play a crucial role in locking the landslide's deformation.Deep displacement analysis indicates that the brittle shear zones act as the sliding surfaces.The progressive destruction of the locked segments and the gradual penetration of brittle shear zones,driven by gravitational potential energy,contribute to the landslide occurrence.This research provides critical insights into the formation mechanisms of large-scale landslides within tectonic mélange belts.
基金supported by the National Natural Science Foundation of China(Grant Nos.12434016 and 12474380)Science and Technology Project of Guangdong Province(Grant No.2020B0101-90001)+1 种基金the National Key Research and Development Program of China(Grant No.2023YFA1406900)the Natural Science Foundation of Guangdong Province(Grant No.2025A1515010714)。
文摘Spin-momentum locking is widely regarded as an inherent property of evanescent waves,where the transverse spin angular momentum is intrinsically tied to the wave's polarization.This principle is well established in systems such as surface plasmon polaritons,surface elastic waves,and other evanescent modes.Here,we theoretically unveil an anomalous breakdown of spin-momentum locking in evanescent electromagnetic waves at a metalgyromagnetic interface.We show that the hybrid polarization of the field induces two successive reversals of transverse spin near the interface—directly violating the conventional locking between spin and momentum.As a result,identical chiral sources placed at different heights above the interface excite evanescent waves propagating in opposite directions,defying standard expectations.This discovery challenges the presumed universality of spin-momentum locking and opens new degrees of freedom for controlling wave propagation in photonic and plasmonic systems.
基金The Natural Science Foundation of the Education Department of Henan Province (2009A1100032010A110005)+1 种基金the International Science and Technology Cooperation Project of Henan Provincethe Foundation of Henan University of Technology
文摘随着电力系统的发展,现行的IEC 60372"Locking devices for ball and socket couplings of string insulator units:Dimensions and tests"(Third edition)1984版已经无法涵盖和适应新的特高压大吨位绝缘子产品和技术的发展,包括对应于36和40两种新的联接标记的更高强度等级的绝缘子。笔者介绍了IEC TC36/MT21工作组维护IEC 60372标准的主要内容:包括结合国际工程实践经验,将已经被广泛应用的36、40两个联接标记加入到本标准中;研究是否增加锁紧销操作试验项目;研究并修改了原标准中L2和L5错误的问题;解决了28BW型锁紧销是否在本次修订中纳入标准的问题等。
基金Supported by the Key Research Project of StatePower Corporation (SPKJ 0l6-06)the Key Scientific ResearchProject of Hubei Province ( 2004AC101D31)
文摘Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. A finite element analysis （FEA） model defining more than 300 contact pairs for long nut-short screw locking mechanism of a large-scale vertical gear-rack typed ship-lift was built. Using augmented Lagrange method and symmetry algorithm of contact element stiffness, the FEA model was analyzed, and the contact stress of contact interfaces and the von Mises stress of key parts were obtained. The results show that the design of the locking mechanism meets the requirement of engineering, and this method is effective for solving large stole nonlinear contact pairs.
文摘To predict the attitude of satellite during the whole deployment process and evaluate the locking impact, a numerical flexible model of a certain satellite associated with four flexible honeycomb solar panels was established. The flexible solar panel was modeled by the finite element analysis (FEA), and the motion equations were derived by Lagrangian formulation. The locking process was based on the method of Hertzian contact, which enables one to predict the locking impact on the satellite and the subsequent oscillation of solar panels. The results reveal that locking operation has great impact on the attitude of the satellite, and the angular acceleration of satellite reaches 22.03°/s2 at the locking moment; the flexible solar panels model is feasible to predict the accurate response of the satellite during deployment and the oscillation of solar panels; the instantly impulsive force occurred during locking process is about 1.5 kN and the changing time is nearly 0.32 s. It provides an effective approach to present the flexible solar panels' deployment process and evaluate the locking impact.
文摘AIM To compare the outcomes of displaced distal radius fractures treated with volar locking plates and with immediate postoperative mobilisation with the outcomes of these fractures treated with modalities that necessitate 6 wk wrist immobilisation.METHODS A prospective,randomised controlled single-centre trial was conducted with 56 patients who had a displaced radius fracture were randomised to treatment either with a volar locking plate(n=29),or another treatment modality(n=27;cast immobilisation with or without wires or external fixator).Outcomes were measured at 12 wk.Functional outcome scores measured were the Patient-Rated Wrist Evaluation(PRWE)Score;Disabilities of the Arm,Shoulder and Hand and activities of daily living(ADLs).Clinical outcomes were wrist range of motion and grip strength.Radiographic parameters were volar inclination and ulnar variance.RESULTS Patients in the volar locking plate group had significantly better PRWE scores,ADL scores,grip strength and range of extension at three months compared with the control group.All radiological parameters were significantly better in the volar locking plate group at 3 mo.CONCLUSION The present study suggests that volar locking plates produced significantly better functional and clinical outcomes at 3 mo compared with other treatment modalities.Anatomical reduction was significantly more likely to be preserved in the plating group.Level of evidence:Ⅱ.
文摘Complex tibial plateau fractures can seriously affect quality of life and physical and mental health of patients.The anatomical relationship between the proximal tibial bone and soft tissue is complex,resulting in different types of tibial plateau fractures.Violent trauma can lead to displaced fracture,serious soft tissue injury,and potentially,dislocation of the knee joint.Therefore,tibial plateau fractures are extremely unstable.AIM To assess the use of locking compression plate(LCP)+T-type steel plate for postoperative weight bearing and functional recovery of complex tibial plateau fractures.METHODS Ninety-seven patients with complex tibial plateau fractures who underwent surgery at our hospital were selected for retrospective study.Forty-nine patients had been treated with LCP+T-type steel plate limited internal fixation(study group),and 48 patients with bilateral ordinary steel plate support(control group).The operation process index,postoperative rehabilitation related index,Rasmussen score of the knee joint,tibial plateau varus angle(TPA),tibial plateau retroversion angle(PA),and surgical complications of the two groups were compared.RESULTS The operation time and intraoperative bone graft volume in the study group were lower than those in the control group(P<0.05).There were no significant differences in surgical bleeding,anterior external incision length,postoperative drainage,hospital stay duration,and fracture healing time between the groups(P>0.05).There was no significant difference in the TPA and PA angle between the groups immediately and 18 mo after surgery(P>0.05).At 12 mo after surgery,the Rasmussen scale score was higher in the study group than in the control group(P<0.05).There was no significant difference in the Rasmussen scale score at 18 mo after surgery,and the radiology score at 12 and 18 mo after surgery,between the two groups(P>0.05).The postoperative complication rate in the study group(3.77%)was lower than that in the control group(15.09%;P<0.05).CONCLUSION LCP+T-type steel plate internal fixation has advantages in terms of minimizing trauma and enabling early postoperative functional exercise,promoting functional recovery and lower limb weight-bearing,and reducing postoperative complications.
基金Project supported by the National Basic Research Program of China(Grant No.2012CB921603)the National Natural Science Foundation of China(Grants Nos.11274209,61475090,61378039,and 61378013)the Research Project Supported by Shanxi Scholarship Council of China(Grant No.2014-009)
文摘We present a laser frequency locking to Rydberg transition with electromagnetically induced transparency（EIT）spectra in a room-temperature cesium vapor cell. Cesium levels 6S_（1/2）, 6P_（3/2）, and the n D_（5/2） state, compose a cascade three-level system, where a coupling laser drives Rydberg transition, and probe laser detects the EIT signal. The error signal, obtained by demodulating the EIT signal, is used to lock the coupling laser frequency to Rydberg transition. The laser frequency fluctuation, ~0.7 MHz, is obtained after locking on, with the minimum Allan variance to be 8.9 × 10^（-11）.This kind of locking method can be used to stabilize the laser frequency to the excited transition.
文摘AIM: To review the results of our experience with the Medartis Aptus plating system for four corner arthrodesis of the wrist, which uses a combination of compression screws and variable angle locking screws.METHODS: We reviewed the results of 17 procedures in 16 patients that underwent scaphoid excision and four corner fusion using the Medartis Aptus system between May 2010 and June 2014. The primary outcome measure was radiographic and clinical union. RESULTS: The mean clinical follow up time was 20.6 mo. The mean union time was 6 mo. Two non-unions required revision procedures. The mean disabilities of the arm, shoulder and hand score taken after union was 36. The mean final grip strength was 27 kg. The mean final range of movement was 30° flexion and 31° of extension. All patients had a restored scapholunate angle on postoperative radiographs. There were no incidences of dorsal impingement.CONCLUSION: Overall our experience with the Aptus plating system shows comparable results to other methods of fixation for four corner fusion, in the short to medium term.
