This paper deals with the vector control, including both the direct vector control(DVC) and the indirect vector control(Id VC),of induction motors. It is well known that the estimation of rotor flux plays a fundamenta...This paper deals with the vector control, including both the direct vector control(DVC) and the indirect vector control(Id VC),of induction motors. It is well known that the estimation of rotor flux plays a fundamental role in the DVC and the estimation of rotor resistance is vital in the slip compensation of the Id VC. In these estimations, the precision is significantly affected by the motor resistances. Therefore, online estimation of motor resistances is indispensable in practice.For a fast estimation of motor resistances, it is necessary to slow down the convergence rate of the current estimate. On the other hand, for a fast estimation of the rotor flux, it is necessary to speed up its convergence rate. It is very difficult to realize such a trade-off in convergence rates in a full order observer.In this paper, we propose to decouple the current observer from the flux observer so as to realize independent convergence rates. Then, the resistance estimation algorithm is applied to both DVC and Id VC. In particular, in the application to Id VC the flux observer needs not be used, which leads to a simpler structure. Meanwhile, independent convergence rates of current observer and flux observer yield an improved performance. A superior performance in the torque and flux responses in both cases is verified by numerous simulations.展开更多
Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. Ho...Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. However, the problem of complexity of selecting vectors and capacitor voltage unbalance needs to be solved when the algorithm of direct torque control （DTC） is implemented on DCMLI. In this paper, a fuzzy DTC system of an induction machine fed by a three-level neutral-point-clamped （NPC） inverter is proposed. After introducing fuzzy logic, optimal selecting switching state is realized by applying various strategies which can distinguish the grade of the errors of stator flux linkage, torque, the neutral-point potential, and the position of stator flux linkage. Consequently, the neutral-point potential unbalance, the dr/dr of output voltage and the switching loss are restrained effectively, and desirable dynamic and steady-state performances of induction machines can be obtained for the DTC scheme. A design method of the fuzzy controller is introduced in detail, and the relevant simulation and experimental results have verified the feasibility of the proposed control algorithm.展开更多
Induction motor is the most sought after motor in the industry for excellent performance characteristics and robustness. Developments in the Power Electronic circuitry have revolutionised the induction motor industry ...Induction motor is the most sought after motor in the industry for excellent performance characteristics and robustness. Developments in the Power Electronic circuitry have revolutionised the induction motor industry leading to the developments in various control strategies and circuits for motor control. Direct Torque Control (DTC) is one of the excellent control strategies preferred by industries for controlling the torque and flux in an induction machine. The main drawback of DTC is the presence of torque ripple which is slightly more than the acceptable limit. There are various parameters that introduce ripples in the electromagnetic torque, one of them being the type of inverter circuit. There are various types of inverter circuits available and the effect of each of them in the production of torque ripple is different. This work is an attempt to identify the influence of various multilevel inverter circuits on the torque ripple level and to propose the best inverter circuit. The influence of multilevel diode clamped inverter and cascaded H bridge inverter circuits on torque ripple minimization, is analysed using simulation studies for identifying the most suitable multilevel inverter circuit which gives minimum torque ripple. The results obtained from the simulation studies are validated by hardware implementation on 0.75 kW induction motor.展开更多
In order to realize direct thrust control instead of traditional sensor-based control for aero-engines,it is indispensable to design a thrust estimator with high accuracy,so a scheme for thrust estimator design based ...In order to realize direct thrust control instead of traditional sensor-based control for aero-engines,it is indispensable to design a thrust estimator with high accuracy,so a scheme for thrust estimator design based on the least square support vector regression machine is proposed to solve this problem. Furthermore,numerical simulations confirm the effectiveness of our presented scheme. During the process of estimator design,a wrapper criterion that can not only reduce the computational complexity but also enhance the generalization performance is proposed to select variables as input variables for estimator.展开更多
Direct torque control (DTC) of Switched reluctance motor is known straightforward control structure with similar execution to that of field situated control strategies. In any case, the part of ideal determination of ...Direct torque control (DTC) of Switched reluctance motor is known straightforward control structure with similar execution to that of field situated control strategies. In any case, the part of ideal determination of the voltage space vector is one of the weakest focuses in a routine DTC drive because of adjustable switching frequency and high torque ripple. In this paper, ideal choice of voltage space vectors is accomplished utilizing ANFIS (Adaptive Neuro Fuzzy Inference System) with space vector Modulation. SVM-DTC gives consistent switching frequency and the proposed ANFIS controller’s structure manages the torque and stator flux error signals through the fuzzy deduction to get a yield that takes the type of space voltage vector. Simulation results accept the proposed evolutionary system with quick torque and flux reaction with minimized torque ripple and flux ripple.展开更多
针对传统软件控制器存在响应速度慢、精度低和抗干扰能力差的问题,文章基于现场可编程门阵列(field programmable gate array,FPGA)实现无刷直流电机(brushless direct current motor,BLDC)模糊PI控制系统的设计。该控制系统内部采用全...针对传统软件控制器存在响应速度慢、精度低和抗干扰能力差的问题,文章基于现场可编程门阵列(field programmable gate array,FPGA)实现无刷直流电机(brushless direct current motor,BLDC)模糊PI控制系统的设计。该控制系统内部采用全硬件实现方式,提高了系统的运算效率,增强了抗干扰能力;系统采用转速、电流双闭环控制,转速环采用模糊PI控制算法,相较于传统PI控制算法,提高了响应速度和控制精度。实验结果表明,文章设计的控制系统响应速度快、超调小、抗干扰能力强。展开更多
Since only one inverter voltage vector is applied during each duty cycle, traditional model predictive direct power control(MPDPC) for grid-connected inverters(GCIs) results in serious harmonics in current and power. ...Since only one inverter voltage vector is applied during each duty cycle, traditional model predictive direct power control(MPDPC) for grid-connected inverters(GCIs) results in serious harmonics in current and power. Moreover, a high sampling frequency is needed to ensure satisfactory steady-state performance, which is contradictory to its long execution time due to the iterative prediction calculations. To solve these problems, a novel dead-beat MPDPC strategy is proposed, using two active inverter voltage vectors and one zero inverter voltage vector during each duty cycle. Adoption of three inverter vectors ensures a constant switching frequency. Thus, smooth steady-state performance of both current and power can be obtained. Unlike the traditional three-vector based MPDPC strategy, the proposed three vectors are selected based on the power errors rather than the sector where the grid voltage vector is located, which ensures that the duration times of the selected vectors are positive all the time. Iterative calculations of the cost function in traditional predictive control are also removed, which makes the proposed strategy easy to implement on digital signal processors(DSPs) for industrial applications. Results of experiments based on a 1 kW inverter setup validate the feasibility of the proposed three-vector based dead-beat MPDPC strategy.展开更多
This paper investigates a Luenberger flux observer with speed adaptation for a direct field oriented control of an induction motor. An improved method of speed estimation that operates on the principle of speed adapti...This paper investigates a Luenberger flux observer with speed adaptation for a direct field oriented control of an induction motor. An improved method of speed estimation that operates on the principle of speed adaptive flux and current observer has been proposed. An observer is basically an estimator that uses a plant model and a feedback loop with measured stator voltage and current. Simulation results show that the proposed direct field oriented control with the proposed observer provides good performance dynamic characteristics. The induction motor is fed by an indirect power electronics converter. This indirect converter is controlled by a sliding mode technique that enables minimization of harmonics introduced by the line converter, as well as the control of the power factor and DC-link voltage. The robustness of the overall system is studied using simulation for different operating modes and varied parameters.展开更多
文摘This paper deals with the vector control, including both the direct vector control(DVC) and the indirect vector control(Id VC),of induction motors. It is well known that the estimation of rotor flux plays a fundamental role in the DVC and the estimation of rotor resistance is vital in the slip compensation of the Id VC. In these estimations, the precision is significantly affected by the motor resistances. Therefore, online estimation of motor resistances is indispensable in practice.For a fast estimation of motor resistances, it is necessary to slow down the convergence rate of the current estimate. On the other hand, for a fast estimation of the rotor flux, it is necessary to speed up its convergence rate. It is very difficult to realize such a trade-off in convergence rates in a full order observer.In this paper, we propose to decouple the current observer from the flux observer so as to realize independent convergence rates. Then, the resistance estimation algorithm is applied to both DVC and Id VC. In particular, in the application to Id VC the flux observer needs not be used, which leads to a simpler structure. Meanwhile, independent convergence rates of current observer and flux observer yield an improved performance. A superior performance in the torque and flux responses in both cases is verified by numerous simulations.
文摘Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. However, the problem of complexity of selecting vectors and capacitor voltage unbalance needs to be solved when the algorithm of direct torque control （DTC） is implemented on DCMLI. In this paper, a fuzzy DTC system of an induction machine fed by a three-level neutral-point-clamped （NPC） inverter is proposed. After introducing fuzzy logic, optimal selecting switching state is realized by applying various strategies which can distinguish the grade of the errors of stator flux linkage, torque, the neutral-point potential, and the position of stator flux linkage. Consequently, the neutral-point potential unbalance, the dr/dr of output voltage and the switching loss are restrained effectively, and desirable dynamic and steady-state performances of induction machines can be obtained for the DTC scheme. A design method of the fuzzy controller is introduced in detail, and the relevant simulation and experimental results have verified the feasibility of the proposed control algorithm.
文摘Induction motor is the most sought after motor in the industry for excellent performance characteristics and robustness. Developments in the Power Electronic circuitry have revolutionised the induction motor industry leading to the developments in various control strategies and circuits for motor control. Direct Torque Control (DTC) is one of the excellent control strategies preferred by industries for controlling the torque and flux in an induction machine. The main drawback of DTC is the presence of torque ripple which is slightly more than the acceptable limit. There are various parameters that introduce ripples in the electromagnetic torque, one of them being the type of inverter circuit. There are various types of inverter circuits available and the effect of each of them in the production of torque ripple is different. This work is an attempt to identify the influence of various multilevel inverter circuits on the torque ripple level and to propose the best inverter circuit. The influence of multilevel diode clamped inverter and cascaded H bridge inverter circuits on torque ripple minimization, is analysed using simulation studies for identifying the most suitable multilevel inverter circuit which gives minimum torque ripple. The results obtained from the simulation studies are validated by hardware implementation on 0.75 kW induction motor.
基金Sponsored by the National Natural Science Foundation of China ( Grant No 50576033)
文摘In order to realize direct thrust control instead of traditional sensor-based control for aero-engines,it is indispensable to design a thrust estimator with high accuracy,so a scheme for thrust estimator design based on the least square support vector regression machine is proposed to solve this problem. Furthermore,numerical simulations confirm the effectiveness of our presented scheme. During the process of estimator design,a wrapper criterion that can not only reduce the computational complexity but also enhance the generalization performance is proposed to select variables as input variables for estimator.
文摘Direct torque control (DTC) of Switched reluctance motor is known straightforward control structure with similar execution to that of field situated control strategies. In any case, the part of ideal determination of the voltage space vector is one of the weakest focuses in a routine DTC drive because of adjustable switching frequency and high torque ripple. In this paper, ideal choice of voltage space vectors is accomplished utilizing ANFIS (Adaptive Neuro Fuzzy Inference System) with space vector Modulation. SVM-DTC gives consistent switching frequency and the proposed ANFIS controller’s structure manages the torque and stator flux error signals through the fuzzy deduction to get a yield that takes the type of space voltage vector. Simulation results accept the proposed evolutionary system with quick torque and flux reaction with minimized torque ripple and flux ripple.
文摘针对传统软件控制器存在响应速度慢、精度低和抗干扰能力差的问题,文章基于现场可编程门阵列(field programmable gate array,FPGA)实现无刷直流电机(brushless direct current motor,BLDC)模糊PI控制系统的设计。该控制系统内部采用全硬件实现方式,提高了系统的运算效率,增强了抗干扰能力;系统采用转速、电流双闭环控制,转速环采用模糊PI控制算法,相较于传统PI控制算法,提高了响应速度和控制精度。实验结果表明,文章设计的控制系统响应速度快、超调小、抗干扰能力强。
基金supported by the National Natural Science Foundation of China(No.51622706)the Fundamental Research Funds for the Central Universities,China(No.2017XZZX002-17)
文摘Since only one inverter voltage vector is applied during each duty cycle, traditional model predictive direct power control(MPDPC) for grid-connected inverters(GCIs) results in serious harmonics in current and power. Moreover, a high sampling frequency is needed to ensure satisfactory steady-state performance, which is contradictory to its long execution time due to the iterative prediction calculations. To solve these problems, a novel dead-beat MPDPC strategy is proposed, using two active inverter voltage vectors and one zero inverter voltage vector during each duty cycle. Adoption of three inverter vectors ensures a constant switching frequency. Thus, smooth steady-state performance of both current and power can be obtained. Unlike the traditional three-vector based MPDPC strategy, the proposed three vectors are selected based on the power errors rather than the sector where the grid voltage vector is located, which ensures that the duration times of the selected vectors are positive all the time. Iterative calculations of the cost function in traditional predictive control are also removed, which makes the proposed strategy easy to implement on digital signal processors(DSPs) for industrial applications. Results of experiments based on a 1 kW inverter setup validate the feasibility of the proposed three-vector based dead-beat MPDPC strategy.
文摘This paper investigates a Luenberger flux observer with speed adaptation for a direct field oriented control of an induction motor. An improved method of speed estimation that operates on the principle of speed adaptive flux and current observer has been proposed. An observer is basically an estimator that uses a plant model and a feedback loop with measured stator voltage and current. Simulation results show that the proposed direct field oriented control with the proposed observer provides good performance dynamic characteristics. The induction motor is fed by an indirect power electronics converter. This indirect converter is controlled by a sliding mode technique that enables minimization of harmonics introduced by the line converter, as well as the control of the power factor and DC-link voltage. The robustness of the overall system is studied using simulation for different operating modes and varied parameters.
