The sub-forum on standardization of new energy and direct-current diversified applications was held on July 9,which gathered leaders and experts to discuss how to thoroughly implement the national green power direct c...The sub-forum on standardization of new energy and direct-current diversified applications was held on July 9,which gathered leaders and experts to discuss how to thoroughly implement the national green power direct connection policy proposed in the transformation of the energy landscape,pool wisdom to tackle bottlenecks in the industrialization of DC technology,and leverage the role of standardization in coordinating and regulating the diversified applications of DC technology.It was designed to promote the establishment of a collaborative,open,and advanced global standards system for DC technology.展开更多
Detecting, real-time monitoring and early warning of underground water-bearing structures are critically important issues in prevention and mitigation of water inrush hazards in underground engineering. Direct current...Detecting, real-time monitoring and early warning of underground water-bearing structures are critically important issues in prevention and mitigation of water inrush hazards in underground engineering. Direct current （DC） resistivity method is a widely used method for routine detection, advanced detection and real-time monitoring of water-bearing structures, due to its high sensitivity to groundwater. In this study, the DC resistivity method applied to underground engineering is reviewed and discussed, including the observation mode, multiple inversions, and real-time monitoring. It is shown that a priori information constrained inversion is desirable to reduce the non-uniqueness of inversion, with which the accuracy of detection can be significantly improved. The focused resistivity method is prospective for advanced detection;with this method, the flanking interference can be reduced and the detection dis-tance is increased subsequently. The time-lapse resistivity inversion method is suitable for the regions with continuous conductivity changes, and it can be used to monitor water inrush in those regions. Based on above-mentioned features of various methods in terms of benefits and limitations, we propose a three-dimensional （3D） induced polarization method characterized with multi-electrode array, and introduce it into tunnels and mines combining with real-time monitoring with time-lapse inversion and cross-hole resistivity method. At last, the prospective applications of DC resistivity method are discussed as follows： （1） available advanced detection technology and instrument in tunnel excavated by tunnel boring machine （TBM）, （2） high-resolution detection method in holes, （3） four-dimensional （4D） monitoring technology for water inrush sources, and （4） estimation of water volume in water-bearing structures.展开更多
Due to the low impedance characteristic of the high voltage direct current(HVDC)grid,the fault current rises extremely fast after a DC-side fault occurs,and this phenomenon seriously endangers the safety of the HVDC g...Due to the low impedance characteristic of the high voltage direct current(HVDC)grid,the fault current rises extremely fast after a DC-side fault occurs,and this phenomenon seriously endangers the safety of the HVDC grid.In order to suppress the rising speed of the fault current and reduce the current interruption requirements of the main breaker(MB),a fault current limiting hybrid DC circuit breaker(FCL-HCB)has been proposed in this paper,and it has the capability of bidirectional fault current limiting and fault current interruption.After the occurrence of the overcurrent in the HVDC grid,the current limiting circuit(CLC)of FCL-HCB is put into operation immediately,and whether the protected line is cut off or resumed to normal operation is decided according to the fault detection result.Compared with the traditional hybrid DC circuit breaker(HCB),the required number of semiconductor switches and the peak value of fault current after fault occurs are greatly reduced by adopting the proposed device.Extensive simulations also verify the effectiveness of the proposed FCL-HCB.展开更多
在海上风电直流汇集-直流送出系统中,基于单相模块化多电平换流器的面对面型(modular multilevel converter based front-to-front,MMC-FTF)高压大功率DC/DC变换器是连接中压汇聚线与高压直流输电(high voltage direct current,HVDC)线...在海上风电直流汇集-直流送出系统中,基于单相模块化多电平换流器的面对面型(modular multilevel converter based front-to-front,MMC-FTF)高压大功率DC/DC变换器是连接中压汇聚线与高压直流输电(high voltage direct current,HVDC)线路的关键接口设备。然而,针对MMC-FTF变换器的阻抗建模鲜有报道,且含MMC-FTF变换器的HVDC系统的小信号稳定性问题尚不明确。针对此问题,该文首先根据频率耦合效应提出共差模提取矩阵,实现了多谐波线性化方法下单相及三相MMC交直流侧阻抗模型的统一,并建立了MMC-FTF变换器的直流侧阻抗模型。其次,利用阻抗稳定性判据揭示了MMC-FTF变换器与岸上三相MMC换流站互联时存在的振荡风险。接着,根据相角灵敏度指标定量评估了不同控制器参数对系统稳定性的影响,并提出用于提升系统稳定性的调参准则。最后,基于MATLAB/Simulink仿真和硬件在环实验验证了结果的正确性。展开更多
为减少温室气体的排放,以风电为代表的清洁能源大规模接入电网。如何消纳高占比、波动剧烈的风电,成为现代电力系统所面临的重要问题。在此背景下,将多端柔性直流输电系统(VSC based multi-terminal HVDC,VSCMTDC)对功率的灵活调节能力...为减少温室气体的排放,以风电为代表的清洁能源大规模接入电网。如何消纳高占比、波动剧烈的风电,成为现代电力系统所面临的重要问题。在此背景下,将多端柔性直流输电系统(VSC based multi-terminal HVDC,VSCMTDC)对功率的灵活调节能力纳入安全约束机组组合(security-constrained unit commitment,SCUC)问题中进行调控。设计日前机组组合、短期实时调节和滚动重调节三段式配合的调度框架,并基于列与约束生成算法(column-andconstraint generation,C&CG)设计三层迭代求解方法。通过该方法解决了传统二阶段鲁棒性机组组合偏于保守的弊端,有效提高了风电消纳。为了充分利用VSC换流站能独立调节有功、无功的优势,在SCUC结果的基础上进行无功电压优化,并基于Benders分解算法进行求解,有效降低了系统网损。最后,将所提模型应用于改进IEEE 30节点系统算例,验证模型的有效性和可行性。展开更多
建立模块化多电平变流器(modular multilevelconverters,MMC)的电磁暂态数学模型以及采用MMC为变流器的高压直流输电系统(high voltage direct current,HVDC)直流侧电压的动态数学模型。在此基础上,分析HVDC系统的直流侧电压动态特性,给...建立模块化多电平变流器(modular multilevelconverters,MMC)的电磁暂态数学模型以及采用MMC为变流器的高压直流输电系统(high voltage direct current,HVDC)直流侧电压的动态数学模型。在此基础上,分析HVDC系统的直流侧电压动态特性,给出HVDC控制器参数协调设计原则和算法。最后,基于PSCAD/EMTDC的数字仿真结果证明了所提出的HVDC控制系统参数协调设计原则和算法的正确性。展开更多
文摘The sub-forum on standardization of new energy and direct-current diversified applications was held on July 9,which gathered leaders and experts to discuss how to thoroughly implement the national green power direct connection policy proposed in the transformation of the energy landscape,pool wisdom to tackle bottlenecks in the industrialization of DC technology,and leverage the role of standardization in coordinating and regulating the diversified applications of DC technology.It was designed to promote the establishment of a collaborative,open,and advanced global standards system for DC technology.
基金supported by the National Program on Key Basic Research Project of China (973 Program) (Nos. 2013CB036002 and 2014CB046901)the National Key Technology R&D Program of the Ministry of Science and Technology of China (No. 2013BAK06B01)the National Natural Science Foundation of China (No. 51139004)
文摘Detecting, real-time monitoring and early warning of underground water-bearing structures are critically important issues in prevention and mitigation of water inrush hazards in underground engineering. Direct current （DC） resistivity method is a widely used method for routine detection, advanced detection and real-time monitoring of water-bearing structures, due to its high sensitivity to groundwater. In this study, the DC resistivity method applied to underground engineering is reviewed and discussed, including the observation mode, multiple inversions, and real-time monitoring. It is shown that a priori information constrained inversion is desirable to reduce the non-uniqueness of inversion, with which the accuracy of detection can be significantly improved. The focused resistivity method is prospective for advanced detection;with this method, the flanking interference can be reduced and the detection dis-tance is increased subsequently. The time-lapse resistivity inversion method is suitable for the regions with continuous conductivity changes, and it can be used to monitor water inrush in those regions. Based on above-mentioned features of various methods in terms of benefits and limitations, we propose a three-dimensional （3D） induced polarization method characterized with multi-electrode array, and introduce it into tunnels and mines combining with real-time monitoring with time-lapse inversion and cross-hole resistivity method. At last, the prospective applications of DC resistivity method are discussed as follows： （1） available advanced detection technology and instrument in tunnel excavated by tunnel boring machine （TBM）, （2） high-resolution detection method in holes, （3） four-dimensional （4D） monitoring technology for water inrush sources, and （4） estimation of water volume in water-bearing structures.
基金This project is funded by the Dongying Science Development Fund Project(DJ2021013).
文摘Due to the low impedance characteristic of the high voltage direct current(HVDC)grid,the fault current rises extremely fast after a DC-side fault occurs,and this phenomenon seriously endangers the safety of the HVDC grid.In order to suppress the rising speed of the fault current and reduce the current interruption requirements of the main breaker(MB),a fault current limiting hybrid DC circuit breaker(FCL-HCB)has been proposed in this paper,and it has the capability of bidirectional fault current limiting and fault current interruption.After the occurrence of the overcurrent in the HVDC grid,the current limiting circuit(CLC)of FCL-HCB is put into operation immediately,and whether the protected line is cut off or resumed to normal operation is decided according to the fault detection result.Compared with the traditional hybrid DC circuit breaker(HCB),the required number of semiconductor switches and the peak value of fault current after fault occurs are greatly reduced by adopting the proposed device.Extensive simulations also verify the effectiveness of the proposed FCL-HCB.
文摘在海上风电直流汇集-直流送出系统中,基于单相模块化多电平换流器的面对面型(modular multilevel converter based front-to-front,MMC-FTF)高压大功率DC/DC变换器是连接中压汇聚线与高压直流输电(high voltage direct current,HVDC)线路的关键接口设备。然而,针对MMC-FTF变换器的阻抗建模鲜有报道,且含MMC-FTF变换器的HVDC系统的小信号稳定性问题尚不明确。针对此问题,该文首先根据频率耦合效应提出共差模提取矩阵,实现了多谐波线性化方法下单相及三相MMC交直流侧阻抗模型的统一,并建立了MMC-FTF变换器的直流侧阻抗模型。其次,利用阻抗稳定性判据揭示了MMC-FTF变换器与岸上三相MMC换流站互联时存在的振荡风险。接着,根据相角灵敏度指标定量评估了不同控制器参数对系统稳定性的影响,并提出用于提升系统稳定性的调参准则。最后,基于MATLAB/Simulink仿真和硬件在环实验验证了结果的正确性。
文摘为减少温室气体的排放,以风电为代表的清洁能源大规模接入电网。如何消纳高占比、波动剧烈的风电,成为现代电力系统所面临的重要问题。在此背景下,将多端柔性直流输电系统(VSC based multi-terminal HVDC,VSCMTDC)对功率的灵活调节能力纳入安全约束机组组合(security-constrained unit commitment,SCUC)问题中进行调控。设计日前机组组合、短期实时调节和滚动重调节三段式配合的调度框架,并基于列与约束生成算法(column-andconstraint generation,C&CG)设计三层迭代求解方法。通过该方法解决了传统二阶段鲁棒性机组组合偏于保守的弊端,有效提高了风电消纳。为了充分利用VSC换流站能独立调节有功、无功的优势,在SCUC结果的基础上进行无功电压优化,并基于Benders分解算法进行求解,有效降低了系统网损。最后,将所提模型应用于改进IEEE 30节点系统算例,验证模型的有效性和可行性。
文摘建立模块化多电平变流器(modular multilevelconverters,MMC)的电磁暂态数学模型以及采用MMC为变流器的高压直流输电系统(high voltage direct current,HVDC)直流侧电压的动态数学模型。在此基础上,分析HVDC系统的直流侧电压动态特性,给出HVDC控制器参数协调设计原则和算法。最后,基于PSCAD/EMTDC的数字仿真结果证明了所提出的HVDC控制系统参数协调设计原则和算法的正确性。
