In order to construct a resource-saving and environment- friendly society, the advantages of radio frequency identification （RFID） were considered. And it put forward the idea of introducing RFID in the recycling ac...In order to construct a resource-saving and environment- friendly society, the advantages of radio frequency identification （RFID） were considered. And it put forward the idea of introducing RFID in the recycling activities of waste products. Taking into account such elements as the technical level of RFID, cost saving from remanufacturing and the cost of RFID tags, both centralized and decentralized supply chain models with different participants in waste product collection were created, in order to determine the optimal pricing strategy and RFID technical level. In the end, sensitivity analyses were conducted to analyze the impacts of scaling parameter for additional increased recovery rate with RFED on pricing and RFID technology level, and impacts of cost saving on the profits of participants in different remanufacturing closed-loop supply chain models.展开更多
The mathematical model that approximates the dynamics of the industrial process is essential for the efficient synthesis of control algorithms in industrial applications. The model of the process can be obtained accor...The mathematical model that approximates the dynamics of the industrial process is essential for the efficient synthesis of control algorithms in industrial applications. The model of the process can be obtained according to the identification procedures in the open-loop, or in the closed-loop. In the open-loop, the identification methods are well known and offer good process approximation, which is not valid for the closed-loop identification, when the system provides the feedback output and doesn’t permit it to be identified in the open-loop. This paper offers an approach for experimental identification in the closed-loop, which supposes the approximation of the process with inertial models, with or without time delay and astatism. The coefficients are calculated based on the values of the critical transfer coefficient and period of the underdamped response of the closed-loop system with P controller, when system achieves the limit of stability. Finally, the closed-loop identification was verified by the computer simulation and the obtained results demonstrated, that the identification procedure in the closed-loop offers good results in process of estimation of the model of the process.展开更多
A new identification method for a linear discrete-time closed-loop system is proposed based on an output over-sampling scheme. When the system outputs are over-sampled the new output sequences would contain more infor...A new identification method for a linear discrete-time closed-loop system is proposed based on an output over-sampling scheme. When the system outputs are over-sampled the new output sequences would contain more information about the plant structure. Using general least squares method （GLS） the plant over-sampled model should be recognized. Then the original plant model should be obtained by its relationship with the over-sampled model. Compared with conventional approaches the advantage of the new method is that even if the ordinary identifiability conditions are not satisfied, a close-loop system can be identified by using the oversampled output without utilizing any external test signal. Accuracy analysis shows the relationship between the estimation error and the over-sampling rate. Numerical simulation illnstrates its effectiveness.展开更多
In the synthesis of the control algorithm for complex systems, we are often faced with imprecise or unknown mathematical models of the dynamical systems, or even with problems in finding a mathematical model of the sy...In the synthesis of the control algorithm for complex systems, we are often faced with imprecise or unknown mathematical models of the dynamical systems, or even with problems in finding a mathematical model of the system in the open loop. To tackle these difficulties, an approach of data-driven model identification and control algorithm design based on the maximum stability degree criterion is proposed in this paper. The data-driven model identification procedure supposes the finding of the mathematical model of the system based on the undamped transient response of the closed-loop system. The system is approximated with the inertial model, where the coefficients are calculated based on the values of the critical transfer coefficient, oscillation amplitude and period of the underdamped response of the closed-loop system. The data driven control design supposes that the tuning parameters of the controller are calculated based on the parameters obtained from the previous step of system identification and there are presented the expressions for the calculation of the tuning parameters. The obtained results of data-driven model identification and algorithm for synthesis the controller were verified by computer simulation.展开更多
The bias eliminated least squares （BELS） method, which is known as efficient for unknown parameter estimation of transfer function in the correlated noise case, has been developed and applied effectively to the clos...The bias eliminated least squares （BELS） method, which is known as efficient for unknown parameter estimation of transfer function in the correlated noise case, has been developed and applied effectively to the closed-loop system identification. In this paper, under the general settings, the realizations of the BELS method as a weighted instrumental variables （WlV） method in both direct and indirect closed- loop system identification are established through constructing an appropriate weighting matrix in the WlV method. The constructed structures are similar in both cases, which reveals that all the proof procedures of the two realizations are the same. Thus, the unified realizations of the BELS as the WlV method for the closed-loop system identification can be built. A simulation example is given to validate our theoretical analysis.展开更多
An intelligent and efficient closed-loop simulation system without any hardware is proposed for AC servo system.According to the characteristics of AC servo system and its control processor,the code executing platform...An intelligent and efficient closed-loop simulation system without any hardware is proposed for AC servo system.According to the characteristics of AC servo system and its control processor,the code executing platform combined with the reverse Polish notation algorithm is developed.To gain the accurate simulation results,the discrete motor model and IPM model are built to deal with the dead-time.Based on the simulation system,parameter identification can be implemented and control parameters can be optimized by using the exhaust algorithm.The parameters obtained by the simulation system were successfully applied to an experimental system,and the favorable control performance was achieved.展开更多
基金National Natural Science Foundation of China(No.71301038)
文摘In order to construct a resource-saving and environment- friendly society, the advantages of radio frequency identification （RFID） were considered. And it put forward the idea of introducing RFID in the recycling activities of waste products. Taking into account such elements as the technical level of RFID, cost saving from remanufacturing and the cost of RFID tags, both centralized and decentralized supply chain models with different participants in waste product collection were created, in order to determine the optimal pricing strategy and RFID technical level. In the end, sensitivity analyses were conducted to analyze the impacts of scaling parameter for additional increased recovery rate with RFED on pricing and RFID technology level, and impacts of cost saving on the profits of participants in different remanufacturing closed-loop supply chain models.
文摘The mathematical model that approximates the dynamics of the industrial process is essential for the efficient synthesis of control algorithms in industrial applications. The model of the process can be obtained according to the identification procedures in the open-loop, or in the closed-loop. In the open-loop, the identification methods are well known and offer good process approximation, which is not valid for the closed-loop identification, when the system provides the feedback output and doesn’t permit it to be identified in the open-loop. This paper offers an approach for experimental identification in the closed-loop, which supposes the approximation of the process with inertial models, with or without time delay and astatism. The coefficients are calculated based on the values of the critical transfer coefficient and period of the underdamped response of the closed-loop system with P controller, when system achieves the limit of stability. Finally, the closed-loop identification was verified by the computer simulation and the obtained results demonstrated, that the identification procedure in the closed-loop offers good results in process of estimation of the model of the process.
基金Project supported by National Natural Science Foundation ofChina (Grant No .60174030)
文摘A new identification method for a linear discrete-time closed-loop system is proposed based on an output over-sampling scheme. When the system outputs are over-sampled the new output sequences would contain more information about the plant structure. Using general least squares method （GLS） the plant over-sampled model should be recognized. Then the original plant model should be obtained by its relationship with the over-sampled model. Compared with conventional approaches the advantage of the new method is that even if the ordinary identifiability conditions are not satisfied, a close-loop system can be identified by using the oversampled output without utilizing any external test signal. Accuracy analysis shows the relationship between the estimation error and the over-sampling rate. Numerical simulation illnstrates its effectiveness.
文摘In the synthesis of the control algorithm for complex systems, we are often faced with imprecise or unknown mathematical models of the dynamical systems, or even with problems in finding a mathematical model of the system in the open loop. To tackle these difficulties, an approach of data-driven model identification and control algorithm design based on the maximum stability degree criterion is proposed in this paper. The data-driven model identification procedure supposes the finding of the mathematical model of the system based on the undamped transient response of the closed-loop system. The system is approximated with the inertial model, where the coefficients are calculated based on the values of the critical transfer coefficient, oscillation amplitude and period of the underdamped response of the closed-loop system. The data driven control design supposes that the tuning parameters of the controller are calculated based on the parameters obtained from the previous step of system identification and there are presented the expressions for the calculation of the tuning parameters. The obtained results of data-driven model identification and algorithm for synthesis the controller were verified by computer simulation.
基金Supported by the National Natural Science Foundation of China for Distinguished Young Scholars (Grant No. 60625104)the Ministerial Foundation of China (Grant No. A2220060039)the Fundamental Research Foundation of BIT (Grant No. 1010050320810)
文摘The bias eliminated least squares （BELS） method, which is known as efficient for unknown parameter estimation of transfer function in the correlated noise case, has been developed and applied effectively to the closed-loop system identification. In this paper, under the general settings, the realizations of the BELS method as a weighted instrumental variables （WlV） method in both direct and indirect closed- loop system identification are established through constructing an appropriate weighting matrix in the WlV method. The constructed structures are similar in both cases, which reveals that all the proof procedures of the two realizations are the same. Thus, the unified realizations of the BELS as the WlV method for the closed-loop system identification can be built. A simulation example is given to validate our theoretical analysis.
文摘An intelligent and efficient closed-loop simulation system without any hardware is proposed for AC servo system.According to the characteristics of AC servo system and its control processor,the code executing platform combined with the reverse Polish notation algorithm is developed.To gain the accurate simulation results,the discrete motor model and IPM model are built to deal with the dead-time.Based on the simulation system,parameter identification can be implemented and control parameters can be optimized by using the exhaust algorithm.The parameters obtained by the simulation system were successfully applied to an experimental system,and the favorable control performance was achieved.
