A low power 433 MHz CMOS （complementary metal- oxide-semiconductor transistor） low noise amplifier（LNA）, used for an ISM （ industrial-scientific-medical ） receiver, is implemented in a 0. 18 μm SMIC mixed-signa...A low power 433 MHz CMOS （complementary metal- oxide-semiconductor transistor） low noise amplifier（LNA）, used for an ISM （ industrial-scientific-medical ） receiver, is implemented in a 0. 18 μm SMIC mixed-signal and RF （ radio frequency） CMOS process. The optimal noise performance of the CMOS LNA is achieved by adjusting the source degeneration inductance and by inserting an appropriate capacitance in parallel with the input transistor of the LNA. The measured results show that at 431 MHz the LNA has a noise figure of 2.4 dB. The S21 is equal to 16 dB, S11 = -11 dB, S22 = -9 dB, and the inverse isolation is 35 dB. The measured input 1-dB compression point （PtdB） and input third-order intermodulation product （IIP3）are - 13 dBm and -3 dBm, respectively. The chip area is 0. 55 mm × 1.2 mm and the DC power consumption is only 4 mW under a 1.8 V voltage supply.展开更多
为了减小氮化镓驱动电路高频工作时的损耗,针对共栅共源氮化镓高电子迁移率晶体管(Cascode GaN HEMT)提出一种高频谐振驱动电路,采用储能元件替代传统驱动电路中的耗能元件,电感电流为GaN器件栅极电容充/放电,有源密勒钳位电路抑制桥臂...为了减小氮化镓驱动电路高频工作时的损耗,针对共栅共源氮化镓高电子迁移率晶体管(Cascode GaN HEMT)提出一种高频谐振驱动电路,采用储能元件替代传统驱动电路中的耗能元件,电感电流为GaN器件栅极电容充/放电,有源密勒钳位电路抑制桥臂串扰。该文重点研究高频谐振驱动电路的工作模态,对电路损耗进行详细分析,给出电感取值的选取原则,并利用PSIM软件对电路进行仿真。最终搭建实验平台对电路的性能进行测试。结果表明,电感为电容充/放电提供低阻抗通路,能有效减小GaN器件驱动电路的电压振荡,明显降低驱动电路的损耗。仿真和实验同时证明了所提出的电路具有较好的性能。展开更多
基金The National Natural Science Foundation of China (No.60772008)the Key Science and Technology Program of Zhejiang Province(No.G2006C13024)
文摘A low power 433 MHz CMOS （complementary metal- oxide-semiconductor transistor） low noise amplifier（LNA）, used for an ISM （ industrial-scientific-medical ） receiver, is implemented in a 0. 18 μm SMIC mixed-signal and RF （ radio frequency） CMOS process. The optimal noise performance of the CMOS LNA is achieved by adjusting the source degeneration inductance and by inserting an appropriate capacitance in parallel with the input transistor of the LNA. The measured results show that at 431 MHz the LNA has a noise figure of 2.4 dB. The S21 is equal to 16 dB, S11 = -11 dB, S22 = -9 dB, and the inverse isolation is 35 dB. The measured input 1-dB compression point （PtdB） and input third-order intermodulation product （IIP3）are - 13 dBm and -3 dBm, respectively. The chip area is 0. 55 mm × 1.2 mm and the DC power consumption is only 4 mW under a 1.8 V voltage supply.
文摘为了减小氮化镓驱动电路高频工作时的损耗,针对共栅共源氮化镓高电子迁移率晶体管(Cascode GaN HEMT)提出一种高频谐振驱动电路,采用储能元件替代传统驱动电路中的耗能元件,电感电流为GaN器件栅极电容充/放电,有源密勒钳位电路抑制桥臂串扰。该文重点研究高频谐振驱动电路的工作模态,对电路损耗进行详细分析,给出电感取值的选取原则,并利用PSIM软件对电路进行仿真。最终搭建实验平台对电路的性能进行测试。结果表明,电感为电容充/放电提供低阻抗通路,能有效减小GaN器件驱动电路的电压振荡,明显降低驱动电路的损耗。仿真和实验同时证明了所提出的电路具有较好的性能。
