TiO2 nanotubes(NT)has been demonstrated its potential in orthopaedic applications due to its enhanced surface wettability and bio-osteointegration.However,the fretting biocorrosion is the main concern that limited its...TiO2 nanotubes(NT)has been demonstrated its potential in orthopaedic applications due to its enhanced surface wettability and bio-osteointegration.However,the fretting biocorrosion is the main concern that limited its successfully application in orthopaedic application.In this study,a structure optimised thin TiO2 nanotube(SONT)layer was successfully created on Ti6Al4V bone screw,and its fretting corrosion performance was investigated and compared to the pristine Ti6Al4V bone screws and NT decorated screw in a bone-screw fretting simulation rig.The results have shown that the debonding TiO2 nanotube from the bone screw reduced significantly,as a result of structure optimisation.The SONT layer also exhibited enhanced bio-corrosion resistance compared pristine bone screw and conventionally NT modified bone screw.It is postulated that interfacial layer between TiO2 nanotube and Ti6Al4V substrate,generated during structure optimisation process,enhanced bonding of TiO2 nanotube layer to the Ti6Al4V bone screws that leading to the improvement in fretting corrosion resistance.The results highlighted the potential SONT in orthopaedic application as bone fracture fixation devices.展开更多
The locking compression plates (LCP) are efficient tools in open reduction and internal fixation (ORIF), especially in osteoporotic bones. Two important factors of screw density and screw position can affect the funct...The locking compression plates (LCP) are efficient tools in open reduction and internal fixation (ORIF), especially in osteoporotic bones. Two important factors of screw density and screw position can affect the functionality of the bone plate. Several studies have assessed the influence of the screw configurations on the bone-plate stiffness, but the effects of screw positions on the interfragmentary strain, εIF of LCP construct have not been investigated yet. In this study, finite element method was used to investigate the influence of screws number and position on the interfragmentary strain of LCP-femur system for a mid-shaft fracture. Results of this study showed that by insertion of screws closer to the fracture site, εIF decreases by 2nd degree polynomial function versus screw position, but by adding the screws from the ends of the plate, or by moving and placing the screws towards the fracture site, the reduction of εIF will be linear. Results of this study were compared and are in agreement with some studies in the literature, even though their scope was mostly stability of the bone-implant system, whereas our scope was focused on the interfragmentary strain.展开更多
Metallic bone screws are clinically used to fix the fractured bone fragments in bone defect treatment;yet they present compromised therapeutic efficacy due to poor osseointegration and tissue support.Here,we develop a...Metallic bone screws are clinically used to fix the fractured bone fragments in bone defect treatment;yet they present compromised therapeutic efficacy due to poor osseointegration and tissue support.Here,we develop a novel thermoresponsive shape memory(SMP)bone screw with osteogenesis-angiogenesis coupling for enhanced bone regeneration.The SMP bone screws are prepared by die casting of shape memory polyurethane/hydroxyapatite(PU/HA)composite,coated with L-arginine(Arg)and calcium ions(Ca^(2+)).The SMP bone screw could shrink and be easily reshaped at room temperature(25◦C)and then rapidly recover to its original state(37℃),granting it robust internal fixation capacity(2-fold increase in pull-out force)and beneficial compressive force to nearby tissues.Additionally,the long-term release of L-arginine and calcium ions synergistically activate the nitric oxide-cyclic guanosine monophosphate(NO-cGMP)signaling pathway of native cells.Synergized with its shape memory function,the SMP bone screw activated calcium signaling pathway under the stimulation of mechanical stress,promote the activation of various osteogenic pathways(e.g.PI3K-Akt signaling pathway),and upregulate the NO-cGMP pathway by regulating the influx of calcium ions and arginine to synchronously coordinate osteogenesis and angiogenesis to accelerate bone repair.We envision that our slot-in,snap-back and homeothermal shape memory bone screw,with its easily reshaped and fast stress release properties and osteogenesis-angiogenesis coupling efficacy,can shed new light on the development of clinical bone screws.展开更多
This paper reports a series of in vitro, ex vivo and in vivo mechanical and corrosion studies of pin and screw prototype made of friction welded pure iron and 316 L type stainless steel aiming to evaluate the applicab...This paper reports a series of in vitro, ex vivo and in vivo mechanical and corrosion studies of pin and screw prototype made of friction welded pure iron and 316 L type stainless steel aiming to evaluate the applicability of the partially removable bone screws. Results showed that the pin possesses bending, tensile and torsional strengths of1706±147, 666±7 and 0.34±0.03 MPa, respectively. The pin degraded at an average weight loss rate of 17.15×10-5 g cm-2 day-1 and released Fe ions at an average concentration of 2.38 ppm. Plastic deformation induced by torsion increased the corrosion rate of the pin from 0.0014 to 0.0137 mm year-1.The maximum pull-out load of the screw prototypes was3800 N with a calculated failure strength by shear load equal to22.2 k N which is higher than the strength of the cortical bone.Detailed analysis of the rat's blood cells during 60 days of the pin implantation indicated a normal response with low neutrophils/lymphocytes ratio of 0.3-0.5. Iron ion concentration in the rat's blood slightly increased from 55 to 61 ppm without affecting the tissue recovering and healing phase. Histological evaluation confirmed the presence of macrophage cells as a normal response to the released iron particles around the iron section of the pin.展开更多
Lumbar degenerative disc disease(DDD)in the elderly population remains a global health problem,especially in patients with osteoporosis.Osteoporosis in the elderly can cause failure of internal fixation.Cortical bone ...Lumbar degenerative disc disease(DDD)in the elderly population remains a global health problem,especially in patients with osteoporosis.Osteoporosis in the elderly can cause failure of internal fixation.Cortical bone trajectory(CBT)is an effective,safe and minimally invasive technique for the treatment of lumbar DDD in patients with osteoporosis.In this review,we analyzed the anatomy,biomechanics,and advantages of the CBT technique in lumbar DDD and revision surgery.Additionally,the clinical trials and case reports,indications,advancements and limitations of this technique were further discussed and reviewed.Finally,we concluded that the CBT technique can be a practical,effective and safe alternative to traditional pedicle screw fixation,especially in DDD patients with osteoporosis.展开更多
To enhance the fusion of graft bone in thoracolumbar vertebrae and minimize the postoperative loss of correction, short-segment pedicle screw fixation was reinforced with posterior moselizee bone grafting in vertebrae...To enhance the fusion of graft bone in thoracolumbar vertebrae and minimize the postoperative loss of correction, short-segment pedicle screw fixation was reinforced with posterior moselizee bone grafting in vertebrae for spinal fusion in patients with thoracrolumbar vertebrate fractures. Seventy patients with thoracrolumbar vertebrate fractures were treated by short-segment pedicle screw fixation and were randomly divided into two groups. Fractures in group A （n=20） were rein-forced with posterior morselized bone grafting in vertebrae for spinal fusion, while patients group B （n=50） did not receive the morselized bone grafting for bone fusion. The two groups were compared in terms of kyphotic deformity, anterior vertebral height, instrument failure and neurological functions after the treatment. Frankel grading system was used for the evaluation of neurological evaluation and Denis scoring scale was employed for pain assessment. The results showed that the kyphosis correction was achieved in both group A and group B （group A： 6.4 degree; group B： 5.4 degree）/At the end of follow-up, kyphosis correction was maintained in group A but lost in group B （P=0.0001）. Postoperatively, greater anterior height was achieved in group A than in group B （P〈0.01）. During follow-up study, anterior vertebral height was maintained only in Group A （P〈0.001）. Both group A and group B showed good Denis pain scores （P1 and P2） but group A outdid group B in terms of control of severe and constant pain （P4 and P5）. By Frankel criteria, the changes in neurological functions in group A was better than those of group B （P〈0.001）. It is concluded that reinforcement of short-segment pedicle fixation with morselized bone grafting for the treatment of patients with thoracolumbar vertebrae fracture could achieve and maintain kyphosis correction, and it may also increase and maintain anterior vertebral height. Morselized bone grafting in vertebrae offers immediate spinal stability in patients with thoracolumbar vertebrate fractures, decreases the instrument failure and provides better postoperative pain control than without the morselized bone grafting.展开更多
Posterior lumbar interbody fusion (PLIF) is a common surgical procedure and widely used in the treatment of lumbar degenerative disc disorders. Traditionally, posterior lumbar interbody fusion is done by using the tra...Posterior lumbar interbody fusion (PLIF) is a common surgical procedure and widely used in the treatment of lumbar degenerative disc disorders. Traditionally, posterior lumbar interbody fusion is done by using the traditional pedicle screw (PS) which offers great advantages, but at the same time it has some disadvantages which include the risk of superior facet joint violation and muscle damage. Recently, an alternative method of screw insertion via cortical bone trajectory (CBT) has been invented which has less invasive process and can be placed without the drawbacks associated with the traditional pedicle screw. However, it has to remain an interest whether CBT will provide similar or greater clinical outcomes compared to PS in PLIF. So the main aim of this review is to compare the clinical outcomes of cortical bone trajectory and traditional pedicle screw fixation in posterior lumbar interbody fusion based on the articles published on this topic. Compared to the traditional pedicle screw fixation, PLIF with CBT has similar clinical outcome based on pain intensity, ODI status and JOA score, as well as similar fusion rate and radiological evaluated complication such as loosening of screw. In addition PLIF with CBT has advantages of less facet joint violation, less blood loss, less intraoperative muscle damage and perioperative pain. On the basis of this study, we can suggest that PLIF with CBT can be considered as a reasonable alternative to PS in PLIF.展开更多
The scanning electron microscope (SEM) results of bone interface of titanium-coated 317L plate screw are reported in this article. 317L plate screw had a rough surface composed of sprayed pure titanium which formed a ...The scanning electron microscope (SEM) results of bone interface of titanium-coated 317L plate screw are reported in this article. 317L plate screw had a rough surface composed of sprayed pure titanium which formed a bone/metal interface in biointegration after implanted into the mandible of dog. Though a bone/metal interface in osseointegration was also formed on the surface of uncoated 317L plate screw after implantation, a smal1 space was seen between the bone and surface of the screw, indicating that the tissue compatibility of titanium-coated 317L plate screw may be better than that of the non-coated screw.展开更多
Objective To evaluate the clinical application of atlantoaxial joint fusion using anterior transarticular screw fixation and bone grafting for atlantoaxial joint instability. Methods Twenty-three cases of atlantoaxial...Objective To evaluate the clinical application of atlantoaxial joint fusion using anterior transarticular screw fixation and bone grafting for atlantoaxial joint instability. Methods Twenty-three cases of atlantoaxial joint instability were展开更多
Bone screws are devices used to fix implants or bones to bones.However,conventional screws are mechanically fixed with thread and often face long-term failure due to poor osseointegration.To improve osseointegration,s...Bone screws are devices used to fix implants or bones to bones.However,conventional screws are mechanically fixed with thread and often face long-term failure due to poor osseointegration.To improve osseointegration,screws are evolving from solid and smooth to porous and rough.Additive manufacturing(AM)offers a high degree of manufacturing freedom,enabling the preparation of predesigned screws that are porous and rough.This paper provides an overview of the problems currently faced by bone screws:long-term loosening and screw breakage.Next,advances in osseointegrated screws are summarized hierarchically(sub-micro,micro,and macro).At the sub-microscale level,we describe surface-modification techniques for enhancing osseointegration.At the micro level,we summarize the micro-design parameters that affect the mechanical and biological properties of porous osseointegrated screws,including porosity,pore size,and pore shape.In addition,we highlight three promising pore shapes:triply periodic minimal surface,auxetic structure with negative Poisson ratio,and the Voronoi structure.At the macro level,we outline the strategies of graded design,gradient design,and topology optimization design to improve the mechanical strength of porous osseointegrated screws.Simultaneously,this paper outlines advances in AM technology for enhancing the mechanical properties of porous osseointegrated screws.AM osseointegrated screws with hierarchical design are expected to provide excellent long-term fixation and the required mechanical strength.展开更多
基金financially supported by the European Union via the H2020-MSCA-RISE-2016 program(BAMOS Project,734156)Royal Society via the International Exchange Program(IE161349)+2 种基金Key Research Project from the National Key Research and Development Program of China(2016YFC1100401)National Natural Science Foundation of China(51705507)Young Elite Scientists Sponsorship Program by CAST(2017QNRC0181)。
文摘TiO2 nanotubes(NT)has been demonstrated its potential in orthopaedic applications due to its enhanced surface wettability and bio-osteointegration.However,the fretting biocorrosion is the main concern that limited its successfully application in orthopaedic application.In this study,a structure optimised thin TiO2 nanotube(SONT)layer was successfully created on Ti6Al4V bone screw,and its fretting corrosion performance was investigated and compared to the pristine Ti6Al4V bone screws and NT decorated screw in a bone-screw fretting simulation rig.The results have shown that the debonding TiO2 nanotube from the bone screw reduced significantly,as a result of structure optimisation.The SONT layer also exhibited enhanced bio-corrosion resistance compared pristine bone screw and conventionally NT modified bone screw.It is postulated that interfacial layer between TiO2 nanotube and Ti6Al4V substrate,generated during structure optimisation process,enhanced bonding of TiO2 nanotube layer to the Ti6Al4V bone screws that leading to the improvement in fretting corrosion resistance.The results highlighted the potential SONT in orthopaedic application as bone fracture fixation devices.
文摘The locking compression plates (LCP) are efficient tools in open reduction and internal fixation (ORIF), especially in osteoporotic bones. Two important factors of screw density and screw position can affect the functionality of the bone plate. Several studies have assessed the influence of the screw configurations on the bone-plate stiffness, but the effects of screw positions on the interfragmentary strain, εIF of LCP construct have not been investigated yet. In this study, finite element method was used to investigate the influence of screws number and position on the interfragmentary strain of LCP-femur system for a mid-shaft fracture. Results of this study showed that by insertion of screws closer to the fracture site, εIF decreases by 2nd degree polynomial function versus screw position, but by adding the screws from the ends of the plate, or by moving and placing the screws towards the fracture site, the reduction of εIF will be linear. Results of this study were compared and are in agreement with some studies in the literature, even though their scope was mostly stability of the bone-implant system, whereas our scope was focused on the interfragmentary strain.
基金supported by the Guangdong-Foshan Joint Fund from Guangdong Basic and Applied Basic Research Foundation(2020B15153000)the Excellent Young Scholars Projects from the National Natural Science Foundation of China(NSFC,82122002)+4 种基金General Program of NSFC(52335004,52275199)the Collaborative Research Fund(C5044-21G)NSFC/RGC Joint Research Scheme(N_PolyU526/22)from the Research Grants Council of Hong Kong,the Innovation and Technology Fund from the Innovation and Technology Commission(ITS/085/21)Beijing Natural Science Foundation(J230001,L248029)Young Scholars Program of Shandong University.
文摘Metallic bone screws are clinically used to fix the fractured bone fragments in bone defect treatment;yet they present compromised therapeutic efficacy due to poor osseointegration and tissue support.Here,we develop a novel thermoresponsive shape memory(SMP)bone screw with osteogenesis-angiogenesis coupling for enhanced bone regeneration.The SMP bone screws are prepared by die casting of shape memory polyurethane/hydroxyapatite(PU/HA)composite,coated with L-arginine(Arg)and calcium ions(Ca^(2+)).The SMP bone screw could shrink and be easily reshaped at room temperature(25◦C)and then rapidly recover to its original state(37℃),granting it robust internal fixation capacity(2-fold increase in pull-out force)and beneficial compressive force to nearby tissues.Additionally,the long-term release of L-arginine and calcium ions synergistically activate the nitric oxide-cyclic guanosine monophosphate(NO-cGMP)signaling pathway of native cells.Synergized with its shape memory function,the SMP bone screw activated calcium signaling pathway under the stimulation of mechanical stress,promote the activation of various osteogenic pathways(e.g.PI3K-Akt signaling pathway),and upregulate the NO-cGMP pathway by regulating the influx of calcium ions and arginine to synchronously coordinate osteogenesis and angiogenesis to accelerate bone repair.We envision that our slot-in,snap-back and homeothermal shape memory bone screw,with its easily reshaped and fast stress release properties and osteogenesis-angiogenesis coupling efficacy,can shed new light on the development of clinical bone screws.
基金supported by the Malaysian Ministry of Higher Education, the Indonesian Ministry of Education and Culture and the Natural Sciences and Engineering Research Council of Canada (NSERC)
文摘This paper reports a series of in vitro, ex vivo and in vivo mechanical and corrosion studies of pin and screw prototype made of friction welded pure iron and 316 L type stainless steel aiming to evaluate the applicability of the partially removable bone screws. Results showed that the pin possesses bending, tensile and torsional strengths of1706±147, 666±7 and 0.34±0.03 MPa, respectively. The pin degraded at an average weight loss rate of 17.15×10-5 g cm-2 day-1 and released Fe ions at an average concentration of 2.38 ppm. Plastic deformation induced by torsion increased the corrosion rate of the pin from 0.0014 to 0.0137 mm year-1.The maximum pull-out load of the screw prototypes was3800 N with a calculated failure strength by shear load equal to22.2 k N which is higher than the strength of the cortical bone.Detailed analysis of the rat's blood cells during 60 days of the pin implantation indicated a normal response with low neutrophils/lymphocytes ratio of 0.3-0.5. Iron ion concentration in the rat's blood slightly increased from 55 to 61 ppm without affecting the tissue recovering and healing phase. Histological evaluation confirmed the presence of macrophage cells as a normal response to the released iron particles around the iron section of the pin.
基金Supported by National Natural Science Foundation of China,No.82202694。
文摘Lumbar degenerative disc disease(DDD)in the elderly population remains a global health problem,especially in patients with osteoporosis.Osteoporosis in the elderly can cause failure of internal fixation.Cortical bone trajectory(CBT)is an effective,safe and minimally invasive technique for the treatment of lumbar DDD in patients with osteoporosis.In this review,we analyzed the anatomy,biomechanics,and advantages of the CBT technique in lumbar DDD and revision surgery.Additionally,the clinical trials and case reports,indications,advancements and limitations of this technique were further discussed and reviewed.Finally,we concluded that the CBT technique can be a practical,effective and safe alternative to traditional pedicle screw fixation,especially in DDD patients with osteoporosis.
文摘To enhance the fusion of graft bone in thoracolumbar vertebrae and minimize the postoperative loss of correction, short-segment pedicle screw fixation was reinforced with posterior moselizee bone grafting in vertebrae for spinal fusion in patients with thoracrolumbar vertebrate fractures. Seventy patients with thoracrolumbar vertebrate fractures were treated by short-segment pedicle screw fixation and were randomly divided into two groups. Fractures in group A （n=20） were rein-forced with posterior morselized bone grafting in vertebrae for spinal fusion, while patients group B （n=50） did not receive the morselized bone grafting for bone fusion. The two groups were compared in terms of kyphotic deformity, anterior vertebral height, instrument failure and neurological functions after the treatment. Frankel grading system was used for the evaluation of neurological evaluation and Denis scoring scale was employed for pain assessment. The results showed that the kyphosis correction was achieved in both group A and group B （group A： 6.4 degree; group B： 5.4 degree）/At the end of follow-up, kyphosis correction was maintained in group A but lost in group B （P=0.0001）. Postoperatively, greater anterior height was achieved in group A than in group B （P〈0.01）. During follow-up study, anterior vertebral height was maintained only in Group A （P〈0.001）. Both group A and group B showed good Denis pain scores （P1 and P2） but group A outdid group B in terms of control of severe and constant pain （P4 and P5）. By Frankel criteria, the changes in neurological functions in group A was better than those of group B （P〈0.001）. It is concluded that reinforcement of short-segment pedicle fixation with morselized bone grafting for the treatment of patients with thoracolumbar vertebrae fracture could achieve and maintain kyphosis correction, and it may also increase and maintain anterior vertebral height. Morselized bone grafting in vertebrae offers immediate spinal stability in patients with thoracolumbar vertebrate fractures, decreases the instrument failure and provides better postoperative pain control than without the morselized bone grafting.
文摘Posterior lumbar interbody fusion (PLIF) is a common surgical procedure and widely used in the treatment of lumbar degenerative disc disorders. Traditionally, posterior lumbar interbody fusion is done by using the traditional pedicle screw (PS) which offers great advantages, but at the same time it has some disadvantages which include the risk of superior facet joint violation and muscle damage. Recently, an alternative method of screw insertion via cortical bone trajectory (CBT) has been invented which has less invasive process and can be placed without the drawbacks associated with the traditional pedicle screw. However, it has to remain an interest whether CBT will provide similar or greater clinical outcomes compared to PS in PLIF. So the main aim of this review is to compare the clinical outcomes of cortical bone trajectory and traditional pedicle screw fixation in posterior lumbar interbody fusion based on the articles published on this topic. Compared to the traditional pedicle screw fixation, PLIF with CBT has similar clinical outcome based on pain intensity, ODI status and JOA score, as well as similar fusion rate and radiological evaluated complication such as loosening of screw. In addition PLIF with CBT has advantages of less facet joint violation, less blood loss, less intraoperative muscle damage and perioperative pain. On the basis of this study, we can suggest that PLIF with CBT can be considered as a reasonable alternative to PS in PLIF.
文摘The scanning electron microscope (SEM) results of bone interface of titanium-coated 317L plate screw are reported in this article. 317L plate screw had a rough surface composed of sprayed pure titanium which formed a bone/metal interface in biointegration after implanted into the mandible of dog. Though a bone/metal interface in osseointegration was also formed on the surface of uncoated 317L plate screw after implantation, a smal1 space was seen between the bone and surface of the screw, indicating that the tissue compatibility of titanium-coated 317L plate screw may be better than that of the non-coated screw.
文摘Objective To evaluate the clinical application of atlantoaxial joint fusion using anterior transarticular screw fixation and bone grafting for atlantoaxial joint instability. Methods Twenty-three cases of atlantoaxial joint instability were
基金supported by the National Natural Science Foundation of China(Nos.82272504 and 82072456)the National Key R&D Program of China(No.2018YFB1105100)+4 种基金the Department of Science and Technology of Jilin Province,China(Nos.20200404202YY,20200403086SF,20210101321JC,20210204104YY,20200201453JC,20220204119YY,202201ZYTS131,202201ZYTS129,20220401084YY,202201ZYTS505,and YDZJ202301ZYTS076)the Department of Finance of Jilin Province,China(No.2020SCZT037)the Jilin Provincial Development and Reform Commission,China(Nos.2018C010 and 2022C043-5)the Interdisciplinary Integration and Cultivation Project of Jilin University(No.JLUXKJC2020307)the Central University Basic Scientific Research Fund(No.2023-JCXK-04).
文摘Bone screws are devices used to fix implants or bones to bones.However,conventional screws are mechanically fixed with thread and often face long-term failure due to poor osseointegration.To improve osseointegration,screws are evolving from solid and smooth to porous and rough.Additive manufacturing(AM)offers a high degree of manufacturing freedom,enabling the preparation of predesigned screws that are porous and rough.This paper provides an overview of the problems currently faced by bone screws:long-term loosening and screw breakage.Next,advances in osseointegrated screws are summarized hierarchically(sub-micro,micro,and macro).At the sub-microscale level,we describe surface-modification techniques for enhancing osseointegration.At the micro level,we summarize the micro-design parameters that affect the mechanical and biological properties of porous osseointegrated screws,including porosity,pore size,and pore shape.In addition,we highlight three promising pore shapes:triply periodic minimal surface,auxetic structure with negative Poisson ratio,and the Voronoi structure.At the macro level,we outline the strategies of graded design,gradient design,and topology optimization design to improve the mechanical strength of porous osseointegrated screws.Simultaneously,this paper outlines advances in AM technology for enhancing the mechanical properties of porous osseointegrated screws.AM osseointegrated screws with hierarchical design are expected to provide excellent long-term fixation and the required mechanical strength.
