Investigating the blast effects and mechanisms on typical finite-sized obstacles is essential for optimizing defense strategies and designing more robust barriers to deter terrorists and protect critical locations.Thi...Investigating the blast effects and mechanisms on typical finite-sized obstacles is essential for optimizing defense strategies and designing more robust barriers to deter terrorists and protect critical locations.This study investigates the blasting effects and underlying mechanisms of concrete frustums subjected to contact explosions,employing both numerical simulations and field tests.It focuses on the effects of top and side blasting,with particular emphasis on fracture modes,damage patterns,and fragment sizes,as well as the causes of different failure modes and the propagation of stress waves.The study also explores the blasting effects of detonating explosives at varying positions along the side and with different charge amounts.The results show that side-blasting leads to complete fragmentation,with tensile waves playing a significant role in creating extensive damage zones that propagate parallel to the frustum's outer surface,concentrating damage near the surface.During top-blasting,the upper half of the frustum undergoes fragmentation,while the lower half experiences cracking.Tensile waves propagate from the top to the bottom surface,forming larger blocks in regions with lower wave intensity.Three distinct damage zones within the frustum were identified,and a series of mathematical formulas were derived to describe the relationship between the maximum fragment size and charge mass.As the charge mass increased from 1.0 kg to 4.0 kg,the maximum fragment size decreased.Detonation at the center of the frustum's side resulted in the most severe fragmentation,with a 51.8%reduction in fragment size compared to other detonation positions.Finally,four broken modes were classified,each influenced by charge mass and explosive location.This study provides valuable insights for optimizing civil blasting operations and designing protective engineering structures.展开更多
This paper presents the explosion cratering effects and their propagation laws of blast waves in dry standard sands using a 450 g-t geotechnical centrifuge apparatus.Ten centrifuge model tests were completed with vari...This paper presents the explosion cratering effects and their propagation laws of blast waves in dry standard sands using a 450 g-t geotechnical centrifuge apparatus.Ten centrifuge model tests were completed with various ranges of explosive mass,burial depth and centrifuge accelerations.Eleven accelerometers were installed to record the acceleration response in sand.The dimensions of the explosion craters were measured after the tests.The results demonstrated that the relationship between the dimensionless parameters of cratering efficiency and gravity scaled yield is a power regression function.Three specific function equations were obtained.The results are in general agreement with those obtained by other studies.A scaling law based on the combination of the π terms was used to fit the results of the ten model tests with a correlation coefficient of 0.931.The relationship can be conveniently used to predict the cratering effects in sand.The results also showed that the peak acceleration is a power increasing function of the acceleration level.An empirical exponent relation between the proportional peak acceleration and distance is proposed.The propagation velocity of blast waves is found to be ranged between 200 and 714 m/s.展开更多
This paper explores the performances of a finite element simulation including four concrete models applied to a full-scale reinforced concrete beam subjected to blast loading. Field test data has been used to compare ...This paper explores the performances of a finite element simulation including four concrete models applied to a full-scale reinforced concrete beam subjected to blast loading. Field test data has been used to compare model results for each case. The numerical modelling has been, carried out using the suitable code LS-DYNA. This code integrates blast load routine(CONWEP) for the explosive description and four different material models for the concrete including: Karagozian & Case Concrete, Winfrith, Continuous Surface Cap Model and Riedel-Hiermaier-Thoma models, with concrete meshing based on 10, 15, and 20 mm. Six full-scale beams were tested: four of them used for the initial calibration of the numerical model and two more tests at lower scaled distances. For calibration, field data obtained employing pressure and accelerometers transducers were compared with the results derived from the numerical simulation. Damage surfaces and the shape of rupture in the beams have been used as references for comparison. Influence of the meshing on accelerations has been put in evidence and for some models the shape and size of the damage in the beams produced maximum differences around 15%. In all cases, the variations between material and mesh models are shown and discussed.展开更多
Blasting has been widely used in mining and construction industries for rock breaking.This paper presents the results of a series of field tests conducted to investigate the ground wave propagation through mixed geolo...Blasting has been widely used in mining and construction industries for rock breaking.This paper presents the results of a series of field tests conducted to investigate the ground wave propagation through mixed geological media.The tests were conducted at a site in the northwestern part of Singapore composed of residual soil and granitic rock.The field test aims to provide measurement data to better understand the stress wave propagation in soil/rock and along their interface.Triaxial accelerometers were used for the free field vibration monitoring.The measured results are presented and discussed,and empirical formulae for predicting peak particle velocity (PPV) attenuation along the ground surface and in soil/rock were derived from the measured data.Also,the ground vibration attenuation across the soil-rock interface was carefully examined,and it was found that the PPV of ground vibration was decreased by 37.2% when it travels from rock to soil in the vertical direction.展开更多
A typical blasting vibration wave is a composite wave,and its attenuation law is affected by the type of dominant wave component.The purpose of the present study is to establish an attenuation equation of the peak par...A typical blasting vibration wave is a composite wave,and its attenuation law is affected by the type of dominant wave component.The purpose of the present study is to establish an attenuation equation of the peak particle velocity(PPV),taking into account the attenuation characteristics of P-,S-and R-waves in the blasting vibration wave.Field blasting tests were carried out as a case to specifically apply the proposed equation.In view of the fact that the discrete properties of rock mass will inevitably cause the uncertainty of blasting vibration,we also carried out a probability analysis of PPV uncertainty,and introduced the concept of reliability to evaluate blasting vibration.The results showed that the established attenuation equation had a higher prediction accuracy,and can be considered as a promising equation implemented on more complex sites.The adopted uncertainty analysis method can comprehensively take account of the attenuation law of blasting vibration measured on site and discrete properties of rock masses.The obtained distribution of the PPV uncertainty factor can quantitatively evaluate the reliability of blasting vibration,which is a powerful and necessary supplement to the PPV attenuation equation.展开更多
On the basis of the theories of mechanics of explosive and rock fracture mechanics, the mechanism of crack initiation and its expansion of directional fracture controlled blasting with shaped charges in rock were stud...On the basis of the theories of mechanics of explosive and rock fracture mechanics, the mechanism of crack initiation and its expansion of directional fracture controlled blasting with shaped charges in rock were studied, then the blasting parameters were designed and tested by a model test in laboratory and field experiment. The experimental and test results showed that the energy from blasting is directionally concentrated for the cumulative action. The directional expansion of cracks is satisfactory, the results of the model test and field test suggested that the orientation fracture blasting with shaped charge is a good means of excavating tunnels or cutting rock.展开更多
Waste and industrial by-products represent a significant percentage of the industrial landfill. The evaluation of these products has a dual effect: it avoids both the landfill (risk of environmental pollution) and lim...Waste and industrial by-products represent a significant percentage of the industrial landfill. The evaluation of these products has a dual effect: it avoids both the landfill (risk of environmental pollution) and limits the use of natural aggregates (depletion of natural resources and landscape fragmentation and the imbalance of the ecosystem). In recent years, applications for industrial waste have been taken into account in the construction of roads with a great interest in many industrialized countries and developing countries. The use of these materials in the construction of the road is a decision based on technical, economic and ecological criteria. In Algeria, the steel plant of El-Hadjar (Annaba), due to its activity generates a significant industrial waste (slag) which creates a storage problem and pollution. For industrialized countries, this product is an abundant raw material at low cost that must be used on a large scale public works. Our study implies the use of slag in the preparation of the subgrade and surface course (as coated). The results of chemical, physical and mechanical analyses of El-Hadjar slag and materials developed, compared to those of natural aggregates, can be used as aggregate in road construction.展开更多
A newly designed shock-tube for biological testing has been built in our labo-ratory.This tube is 39.34 m long.It consists of several sections:high pressure section,divergent section,transitional section,test section ...A newly designed shock-tube for biological testing has been built in our labo-ratory.This tube is 39.34 m long.It consists of several sections:high pressure section,divergent section,transitional section,test section and wave-dissipated section.In theopen condition,the maximal overpressure is about 214,3 kPa,while in the closed condi-tion,the maximal overpressure may go up to 630.3 kPa.The energy source is compres-sed air.Using this equipment,we are able to inflict blast injuries with various degreesof severity in rabbits,dogs and sheep.展开更多
In the process of blasting excavation, stress wave propagation and gas expansion can basically induce damage to surrounding rocks, which is detrimental to rock mass integrity and engineering safety. In this case, eval...In the process of blasting excavation, stress wave propagation and gas expansion can basically induce damage to surrounding rocks, which is detrimental to rock mass integrity and engineering safety. In this case, evaluation and control of blast-induced effects are essential to the safety of nearby buildings and integrity of bedrock in blasting field. In Fangchenggang nuclear power station of China, the drill-and- blast method was employed for bedrock excavation. In order to reduce the blast-induced damage zone, the wave propagation and associated damage to rock mass should be carefully investigated. In this paper, the wave propagation regressively obtained from field monitoring data was presented based on empirical formula （e.g. Sadovsloj formula）. The relationship between the peak particle velocity （PPV） at a distance of 30 m away from the charge hole and charge per delay in blast design was derived. Meanwhile, the acoustic tests before and after blasting were conducted to determine the damage depth of rock mass. The charge per delay in blast design was then calibrated based on the blast-induced wave propagation regularity. The results showed that a satisfactory effect was achieved on blast-induced damage control of rock mass. This could be helpful to rock damage control in similar blasting projects.展开更多
Ten pathogenic strains were isolated fi-om gingers infected by blast, and were identified by substrate utilization test and biochemical test. The identifica- tion results showed that these ten strains accorded with th...Ten pathogenic strains were isolated fi-om gingers infected by blast, and were identified by substrate utilization test and biochemical test. The identifica- tion results showed that these ten strains accorded with the basic characteristics of Pseudomonas solanacearum. Drug sensitivity test of ten strains was carried out, and prevention agents were screened to provide an experimental basis for the control of ginger blast.展开更多
In bistaic acoustic testing, there will be strong direct blast interference. An algorithm based on signal phase-matching array processing that rejects direct blast interference in bistatic acoustic testing has been st...In bistaic acoustic testing, there will be strong direct blast interference. An algorithm based on signal phase-matching array processing that rejects direct blast interference in bistatic acoustic testing has been studied, through which the object scattering signal is accurately extracted. Characteristics of bistatic acoustic testing and signal phase matching processing principle are fully integrated in this algorithm. Firstly, the direct blast interference is calculated from the receiving signal based on three subarrays signal phase matching processing. Secondly, the direct blast is rejected by subtraction from the receiving signal. In this way the limitations of the high signal to noise ratio that signal phase matching processing required for direct calculating the object scattering signal can be avoided. Simulation and sea trial results show that, when the ratio of signal to interference is greater than -20 dB, this algorithm of direct blast interference rejection based phase matching signal processing can accurately extract the object scattering signal.展开更多
基金the support provided by the Technology Innovation Project (Grant No. KYGYZB002201) for the research work
文摘Investigating the blast effects and mechanisms on typical finite-sized obstacles is essential for optimizing defense strategies and designing more robust barriers to deter terrorists and protect critical locations.This study investigates the blasting effects and underlying mechanisms of concrete frustums subjected to contact explosions,employing both numerical simulations and field tests.It focuses on the effects of top and side blasting,with particular emphasis on fracture modes,damage patterns,and fragment sizes,as well as the causes of different failure modes and the propagation of stress waves.The study also explores the blasting effects of detonating explosives at varying positions along the side and with different charge amounts.The results show that side-blasting leads to complete fragmentation,with tensile waves playing a significant role in creating extensive damage zones that propagate parallel to the frustum's outer surface,concentrating damage near the surface.During top-blasting,the upper half of the frustum undergoes fragmentation,while the lower half experiences cracking.Tensile waves propagate from the top to the bottom surface,forming larger blocks in regions with lower wave intensity.Three distinct damage zones within the frustum were identified,and a series of mathematical formulas were derived to describe the relationship between the maximum fragment size and charge mass.As the charge mass increased from 1.0 kg to 4.0 kg,the maximum fragment size decreased.Detonation at the center of the frustum's side resulted in the most severe fragmentation,with a 51.8%reduction in fragment size compared to other detonation positions.Finally,four broken modes were classified,each influenced by charge mass and explosive location.This study provides valuable insights for optimizing civil blasting operations and designing protective engineering structures.
基金supported by the National Natural Science Foundation of China (No. 50779073)the Program Foundation of the China Institute of Water Resources and Hydropower Research (IWHR)(No. YANJI ZD0710)
文摘This paper presents the explosion cratering effects and their propagation laws of blast waves in dry standard sands using a 450 g-t geotechnical centrifuge apparatus.Ten centrifuge model tests were completed with various ranges of explosive mass,burial depth and centrifuge accelerations.Eleven accelerometers were installed to record the acceleration response in sand.The dimensions of the explosion craters were measured after the tests.The results demonstrated that the relationship between the dimensionless parameters of cratering efficiency and gravity scaled yield is a power regression function.Three specific function equations were obtained.The results are in general agreement with those obtained by other studies.A scaling law based on the combination of the π terms was used to fit the results of the ten model tests with a correlation coefficient of 0.931.The relationship can be conveniently used to predict the cratering effects in sand.The results also showed that the peak acceleration is a power increasing function of the acceleration level.An empirical exponent relation between the proportional peak acceleration and distance is proposed.The propagation velocity of blast waves is found to be ranged between 200 and 714 m/s.
基金This research has been conducted under SEGTRANS project,funded by the Centre for Industrial Technological Development(CDTI,Government of Spain).
文摘This paper explores the performances of a finite element simulation including four concrete models applied to a full-scale reinforced concrete beam subjected to blast loading. Field test data has been used to compare model results for each case. The numerical modelling has been, carried out using the suitable code LS-DYNA. This code integrates blast load routine(CONWEP) for the explosive description and four different material models for the concrete including: Karagozian & Case Concrete, Winfrith, Continuous Surface Cap Model and Riedel-Hiermaier-Thoma models, with concrete meshing based on 10, 15, and 20 mm. Six full-scale beams were tested: four of them used for the initial calibration of the numerical model and two more tests at lower scaled distances. For calibration, field data obtained employing pressure and accelerometers transducers were compared with the results derived from the numerical simulation. Damage surfaces and the shape of rupture in the beams have been used as references for comparison. Influence of the meshing on accelerations has been put in evidence and for some models the shape and size of the damage in the beams produced maximum differences around 15%. In all cases, the variations between material and mesh models are shown and discussed.
基金supported by the Land and Liveability National Innovation Challenge under L2 NIC Award No. L2NICCFP1-2013-1
文摘Blasting has been widely used in mining and construction industries for rock breaking.This paper presents the results of a series of field tests conducted to investigate the ground wave propagation through mixed geological media.The tests were conducted at a site in the northwestern part of Singapore composed of residual soil and granitic rock.The field test aims to provide measurement data to better understand the stress wave propagation in soil/rock and along their interface.Triaxial accelerometers were used for the free field vibration monitoring.The measured results are presented and discussed,and empirical formulae for predicting peak particle velocity (PPV) attenuation along the ground surface and in soil/rock were derived from the measured data.Also,the ground vibration attenuation across the soil-rock interface was carefully examined,and it was found that the PPV of ground vibration was decreased by 37.2% when it travels from rock to soil in the vertical direction.
基金financially supported by National Key R&D Program of China(Grant No.2020YFA0711802)National Nature Science Foundation of China(Grant Nos.51439008 and 51779248).
文摘A typical blasting vibration wave is a composite wave,and its attenuation law is affected by the type of dominant wave component.The purpose of the present study is to establish an attenuation equation of the peak particle velocity(PPV),taking into account the attenuation characteristics of P-,S-and R-waves in the blasting vibration wave.Field blasting tests were carried out as a case to specifically apply the proposed equation.In view of the fact that the discrete properties of rock mass will inevitably cause the uncertainty of blasting vibration,we also carried out a probability analysis of PPV uncertainty,and introduced the concept of reliability to evaluate blasting vibration.The results showed that the established attenuation equation had a higher prediction accuracy,and can be considered as a promising equation implemented on more complex sites.The adopted uncertainty analysis method can comprehensively take account of the attenuation law of blasting vibration measured on site and discrete properties of rock masses.The obtained distribution of the PPV uncertainty factor can quantitatively evaluate the reliability of blasting vibration,which is a powerful and necessary supplement to the PPV attenuation equation.
文摘On the basis of the theories of mechanics of explosive and rock fracture mechanics, the mechanism of crack initiation and its expansion of directional fracture controlled blasting with shaped charges in rock were studied, then the blasting parameters were designed and tested by a model test in laboratory and field experiment. The experimental and test results showed that the energy from blasting is directionally concentrated for the cumulative action. The directional expansion of cracks is satisfactory, the results of the model test and field test suggested that the orientation fracture blasting with shaped charge is a good means of excavating tunnels or cutting rock.
文摘Waste and industrial by-products represent a significant percentage of the industrial landfill. The evaluation of these products has a dual effect: it avoids both the landfill (risk of environmental pollution) and limits the use of natural aggregates (depletion of natural resources and landscape fragmentation and the imbalance of the ecosystem). In recent years, applications for industrial waste have been taken into account in the construction of roads with a great interest in many industrialized countries and developing countries. The use of these materials in the construction of the road is a decision based on technical, economic and ecological criteria. In Algeria, the steel plant of El-Hadjar (Annaba), due to its activity generates a significant industrial waste (slag) which creates a storage problem and pollution. For industrialized countries, this product is an abundant raw material at low cost that must be used on a large scale public works. Our study implies the use of slag in the preparation of the subgrade and surface course (as coated). The results of chemical, physical and mechanical analyses of El-Hadjar slag and materials developed, compared to those of natural aggregates, can be used as aggregate in road construction.
文摘A newly designed shock-tube for biological testing has been built in our labo-ratory.This tube is 39.34 m long.It consists of several sections:high pressure section,divergent section,transitional section,test section and wave-dissipated section.In theopen condition,the maximal overpressure is about 214,3 kPa,while in the closed condi-tion,the maximal overpressure may go up to 630.3 kPa.The energy source is compres-sed air.Using this equipment,we are able to inflict blast injuries with various degreesof severity in rabbits,dogs and sheep.
基金supported by the Key Program of National Natural Science Foundation of China(Grant No.51439008)National Natural Science Foundation of China(Grant Nos.41572307 and51779248)National Natural Science Funds for Distinguished Young Scholar of China(Grant No.41525009)
文摘In the process of blasting excavation, stress wave propagation and gas expansion can basically induce damage to surrounding rocks, which is detrimental to rock mass integrity and engineering safety. In this case, evaluation and control of blast-induced effects are essential to the safety of nearby buildings and integrity of bedrock in blasting field. In Fangchenggang nuclear power station of China, the drill-and- blast method was employed for bedrock excavation. In order to reduce the blast-induced damage zone, the wave propagation and associated damage to rock mass should be carefully investigated. In this paper, the wave propagation regressively obtained from field monitoring data was presented based on empirical formula （e.g. Sadovsloj formula）. The relationship between the peak particle velocity （PPV） at a distance of 30 m away from the charge hole and charge per delay in blast design was derived. Meanwhile, the acoustic tests before and after blasting were conducted to determine the damage depth of rock mass. The charge per delay in blast design was then calibrated based on the blast-induced wave propagation regularity. The results showed that a satisfactory effect was achieved on blast-induced damage control of rock mass. This could be helpful to rock damage control in similar blasting projects.
基金Supported by Science and Technology Development Project of Shandong Province(2011YD210220)
文摘Ten pathogenic strains were isolated fi-om gingers infected by blast, and were identified by substrate utilization test and biochemical test. The identifica- tion results showed that these ten strains accorded with the basic characteristics of Pseudomonas solanacearum. Drug sensitivity test of ten strains was carried out, and prevention agents were screened to provide an experimental basis for the control of ginger blast.
基金supported by the Foundation of Key Laboratory for Underwater Test & Control Technology under Grant No.9140C260201110C26
文摘In bistaic acoustic testing, there will be strong direct blast interference. An algorithm based on signal phase-matching array processing that rejects direct blast interference in bistatic acoustic testing has been studied, through which the object scattering signal is accurately extracted. Characteristics of bistatic acoustic testing and signal phase matching processing principle are fully integrated in this algorithm. Firstly, the direct blast interference is calculated from the receiving signal based on three subarrays signal phase matching processing. Secondly, the direct blast is rejected by subtraction from the receiving signal. In this way the limitations of the high signal to noise ratio that signal phase matching processing required for direct calculating the object scattering signal can be avoided. Simulation and sea trial results show that, when the ratio of signal to interference is greater than -20 dB, this algorithm of direct blast interference rejection based phase matching signal processing can accurately extract the object scattering signal.
