The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the cha...The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the characteristics of being renewable,environmentally friendly,and having excellent barrier properties.They have become an important choice in fields such as food packaging,agricultural film covering,and medical protection.This review systematically analyzes the design and research of this type of material,classifying biobased and biodegradable barrier materials based on the sources of raw materials and synthesis pathways.It also provides a detailed introduction to the latest research progress of biobased and biodegradable barrier materials,discussing the synthesis methods and improvement measures of their barrier properties.Subsequently,it analyzes the related technologies for enhancing the barrier properties of biobased and biodegradable barrier materials,and finally looks forward to the directions that future research should focus on,promoting the transition of biobased and biodegradable barrier materials from the laboratory to industrial applications.展开更多
The aim of this research is to find substitute barrier materials for natural clay from two kinds of municipal sludge: waterworks sludge(S_w) and dredging sludge(S_d). Laboratory tests were performed firstly to determi...The aim of this research is to find substitute barrier materials for natural clay from two kinds of municipal sludge: waterworks sludge(S_w) and dredging sludge(S_d). Laboratory tests were performed firstly to determine their Atterberg limits and hydraulic conductivity. Based on the results, the use of waterworks sludge was recommended. Then, shear strength tests were performed and it was found the shear resistance property of waterworks sludge is strong enough to maintain slope stability. In order to evaluate the possibility of secondary pollution, the heavy metal contents of waterworks sludge was determined and the results indicated that secondary pollution is unlikely happened. Finally, economic analysis proves that reusing waterworks sludge as barrier will reduce the lost a great for both landfill and waterworks. Based on the results, waterworks sludge was proposed to use and a further long-term simulated landfill test was suggested.展开更多
Two sets of alloys,Mg-Zn-Ca-xNi(0≤x≤5),have been developed with tunable corrosion and mechanical properties,optimized for fracturing materials.High-zinc artificial aged(T6)Mg-12Zn-0.5Ca-x Ni(0≤x≤5)series,featuring...Two sets of alloys,Mg-Zn-Ca-xNi(0≤x≤5),have been developed with tunable corrosion and mechanical properties,optimized for fracturing materials.High-zinc artificial aged(T6)Mg-12Zn-0.5Ca-x Ni(0≤x≤5)series,featuring a straightforward preparation method and the potential for manufacturing large-scale components,exhibit notable corrosion rates up to 29 mg cm^(-2)h^(-1)at 25℃ and 643 mg cm^(-2)h^(-1)at 93℃.The high corrosion rate is primary due to the Ni–containing second phases,which intensify the galvanic corrosion that overwhelms their corrosion barrier effect.Low-zinc rolled Mg-1.5Zn-0.2Ca-x Ni(0≤x≤5)series,characterizing excellent deformability with an elongation to failure of~26%,present accelerated corrosion rates up to 34 mg cm^(-2)h^(-1)at 25℃ and 942 mg cm^(-2)h^(-1)at 93℃.The elimination of corrosion barrier effect via deformation contributes to the further increase of corrosion rate compared to the T6 series.Additionally,Mg-Zn-Ca-xNi(0≤x≤5)alloys exhibit tunable ultimate tensile strengths ranging from~190 to~237 MPa,depending on their specific composition.The adjustable corrosion rate and mechanical properties render the Mg-Zn-Ca-x Ni(0≤x≤5)alloys suitable for fracturing materials.展开更多
Thermal barrier coating(TBC)materials perform an increasingly important role in the thermal or chemical protection of hot components in a gas turbine.In this study,a novel high entropy hafnate(Y_(0.2)Gd_(0.2)Dy_(0.2)E...Thermal barrier coating(TBC)materials perform an increasingly important role in the thermal or chemical protection of hot components in a gas turbine.In this study,a novel high entropy hafnate(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) was synthesized by solution combustion method and investigated as a potential TBC layer.The as-synthesized(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) possesses a pure single disordered fluorite phase with a highly homogeneous distribution of rare earth(RE)cations,exhibiting prominent phase stability and excellent chemical compatibility with Al_(2)O_(3) even at 1300°C.Moreover,(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) demonstrates a more sluggish grain growth rate than Y_(2)Hf_(2)O_(7).The thermal conductivity of(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7)(0.73-0.93 W m^(-1)K^(-1))is smaller than those of components RE_(2)Hf_(2)O_(7) and many high entropy TBC materials.Beside,the calculated thermal expansion coefficient(TEC)of(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7)(10.68×10^(-6)/K,1100°C)is smaller than that of yttriastabilized zirconia(YSZ).Based on the results of this work,(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) is suitable for the next generation TBC materials with outstanding properties.展开更多
The p-type （Bi0.15Sb0.85）2Te3 and PbTe are typical thermoelectric materials used for low and middle temperature range and functional graded materials （FGM） is an inevitable way to widen the working temperature ran...The p-type （Bi0.15Sb0.85）2Te3 and PbTe are typical thermoelectric materials used for low and middle temperature range and functional graded materials （FGM） is an inevitable way to widen the working temperature range. Here two segments graded thermoelectric materials （GTM） consisting of （Bi0.15Sb0.85）2Te3, PbTe and different barriers were fabricated by the common hot pressure method. Metals Fe, Mg and Ni were used as barriers between the two segments. The diffusion of different barriers between the barriers and bases were analyzed by electron microprobe analysis （EMA）. The phase and crystal structures were determined by X-ray diffraction analysis （XRD）. The thermoelectric properties were measured at 303 K along the direction parallel to the pressing direction. The results show that the compositional diffusion occurs when there is no barrier at the interface of the two segments, and the diffusion of Pb is most obvious; as the barrier material, the diffusion of metals Fe, Mg and Ni between different bases is not very obvious, and the thermoelectric properties of GTM is much better than that of the original segment.展开更多
In this article,plasma-assisted NH;synthesis directly from N;and H;over packing materials with different dielectric constants(BaTiO_(2),TiO_(2) and SiO_(2))and thermal conductivities(Be O,Al N and Al_(2)O_(2))at room ...In this article,plasma-assisted NH;synthesis directly from N;and H;over packing materials with different dielectric constants(BaTiO_(2),TiO_(2) and SiO_(2))and thermal conductivities(Be O,Al N and Al_(2)O_(2))at room temperature and atmospheric pressure is reported.The higher dielectric constant and thermal conductivity of packing material are found to be the key parameters in enhancing the NH;synthesis performance.The NH;concentration of 1344 ppm is achieved in the presence of BaTiO_(2),which is 106%higher than that of SiO_(2),at the specific input energy(SIE)of 5.4 k J·l^(-1).The presence of materials with higher dielectric constant,i.e.BaTiO_(2) and TiO_(2)in this work,would contribute to the increase of electron energy and energy injected to plasma,which is conductive to the generation of chemically active species by electron-impact reactions.Therefore,the employment of packing materials with higher dielectric constant has proved to be beneficial for NH;synthesis.Compared to that of Al_(2)O_(3),the presence of Be O and Al N yields 31.0%and 16.9%improvement in NH;concentration,respectively,at the SIE of5.4 k J·l^(-1).The results of IR imaging show that the addition of Be O decreases the surface temperature of the packed region by 20.5%to 70.3℃ and results in an extension of entropy increment compared to that of Al_(2)O_(3),at the SIE of 5.4 k J·l^(-1).The results indicate that the presence of materials with higher thermal conductivity is beneficial for NH;synthesis,which has been confirmed by the lower surface temperature and higher entropy increment of the packed region.In addition,when SIE is higher than the optimal value,further increasing SIE would lead to the decrease of energy efficiency,which would be related to the exacerbation in reverse reaction of NH;formation reactions.展开更多
In this paper, with K＋, Ca2＋ and Fe3＋ as the objects of study, retardation of soil-bentonite （SB） barrier materials for metal ions with different valences is investigated, and the adsorption mechanism, migration ...In this paper, with K＋, Ca2＋ and Fe3＋ as the objects of study, retardation of soil-bentonite （SB） barrier materials for metal ions with different valences is investigated, and the adsorption mechanism, migration patterns and permeation behavior are explored so as to provide a theoretical basis for their application. The results show that the adsorption process for metal ions with different valences by SB barrier materials is fast, and the higher the valence, the greater the adsorption capacity. The fitting of the adsorption process conforms to pseudo-second-order adsorption kinetics and Langmuir-Freundlich adsorption equation, which explains that chemical adsorption is the dominating state and that the SB surface has certain heterogeneity. The permeability coefficient of K＋, Ca2＋ and Fe3＋ in SB each has a maximum and the higher the valence, the sooner the maximum appears. Also the higher the valence, the more obvious the effect on SB retardation performance; and the sooner the ion breaks through the barrier wall completely, that is, the wall＇s retardation performance for higher valent ions may decline.展开更多
Compacted bentonite-sand(B/S)mixtures have been used as a barrier material in engineered barrier systems(EBSs)of deep geological repositories(DGR)to store nuclear wastes.This study investigates the individual and comb...Compacted bentonite-sand(B/S)mixtures have been used as a barrier material in engineered barrier systems(EBSs)of deep geological repositories(DGR)to store nuclear wastes.This study investigates the individual and combined effects of different chemical compositions of deep groundwaters(chemical factor)at potential repository sites in Canada(the Trenton and Guelph regions in Ontario),heat generated in DGRs(thermal factor),dry densities and mass ratios of bentonite and sand mixtures(physical factors)on the swelling behavior and ability of bentonite-based materials.In this study,swelling tests are conducted on B/S mixtures with different B/S mix ratios(20/80 to 70/30),compacted at different dry densities(ρd=1.6-2 g/cm^(3)),saturated with different types of water(distilled water and simulated deep groundwater of Trenton and Guelph)and exposed to different temperatures(20℃-80℃).Moreover,scanning electron microscopy(SEM)analyses,mercury intrusion porosimetry(MIP)tests and X-ray diffractometry(XRD)analyses are carried out to evaluate the morphological,microstructural and mineralogical characteristics of the B/S mixtures.The test results indicate that the swelling potential of the B/S mixtures is significantly affected by these physical and chemical factors as well as the combined effects of the chemical and thermal factors.A significant decrease in the swelling capacity is observed when the B/S materials are exposed to the aforementioned groundwaters.A large decrease in the swelling capacity is observed for higher bentonite content in the mixtures.Moreover,higher temperatures intensify the chemically-induced reduction of the swelling capacity of the B/S barrier materials.This decrease in the swelling capacity is caused by the chemical and/or microstructural changes of the materials.The results from this research will help engineers to design and build EBSs for DGRs with similar groundwater and thermal conditions.展开更多
CrTaO_(4)has been found to play a pivotal role in the protection of refractory high-entropy alloys(RHEAs)from high-temperature oxidation and thermal attack due to its high melting point,low thermal conductivity,close ...CrTaO_(4)has been found to play a pivotal role in the protection of refractory high-entropy alloys(RHEAs)from high-temperature oxidation and thermal attack due to its high melting point,low thermal conductivity,close thermal expansion coefficient(TEC)to RHEAs.These appealing properties enable CrTaO_(4)as a new type of protective scale material for high-temperature applications such as in air breathing jet engines.For such engine applications,CaO-MgO-Al_(2)O_(3)-SiO_(2)(CMAS)corrosion is a critical issue.However,the corrosion behavior of CrTaO_(4)under CMAS attack remains unknown so far.Here,the corrosion resistance of CrTaO_(4)to molten CMAS is comprehensively studied.It is demonstrated that the CMAS corrosion resistance is significantly superior over commercial yttria-stabilized zirconia and the commonly investigated thermal barrier coating materials.Element and phase compositional analyses indicate dense and CMAS corrosion-resistant layers are established between CMAS and the CrTaO_(4)substrate.The interface reaction between the CrTaO_(4)substrate and CMAS at 1250 and 1300℃gives rise to a dense layer composed of CaTa_(2)O_(6) and Mg(Cr,Al)_(2)O_(4)spinel just beneath the molten CMAS.At 1350℃,a phase composition gradient layer,composed of crystalline phases CaTa_(2)O_(6)/CaTa_(2)O_(6)+Mg(Cr,Al)_(2)O_(4)/CaTa_(2)O_(6)+Cr2O_(3),is formed.With increased calcium consumption due to more Ca-containing crystalline phase formation upon elevating temperature,the Ca/Si ratio in CMAS melt declines,thereby increasing the viscosity of the melt and mitigating the penetration of CMAS into the CrTaO_(4)substrate.展开更多
Dielectric barrier discharge(DBD)is considered as a promising technique to produce large volume uniform plasma at atmospheric pressure,and the dielectric barrier layer between the electrodes plays a key role in the DB...Dielectric barrier discharge(DBD)is considered as a promising technique to produce large volume uniform plasma at atmospheric pressure,and the dielectric barrier layer between the electrodes plays a key role in the DBD processes and enhancing discharge uniformity.In this work,the uniformity and discharge characteristics of the nanosecond(ns)pulsed DBD with dielectric barrier layers made of alumina,quartz glass,polycarbonate(PC),and polypropylene(PP)are investigated via discharge image observation,voltage-current waveform measurement and optical emission spectral diagnosis.Through analyzing discharge image by gray value standard deviation method,the discharge uniformity is quantitatively calculated.The effects of the space electric field intensity,the electron density(Ne),and the space reactive species on the uniformity are studied with quantifying the gap voltage Ug and the discharge current Ig,analyzing the recorded optical emission spectra,and simulating the temporal distribution of Ne with a one-dimensional fluid model.It is found that as the relative permittivity of the dielectric materials increases,the space electric field intensity is enhanced,which results in a higher Ne and electron temperature(Te).Therefore,an appropriate value of space electric field intensity can promote electron avalanches,resulting in uniform and stable plasma by the merging of electron avalanches.However,an excessive value of space electric field intensity leads to the aggregation of space charges and the distortion of the space electric field,which reduce the discharge uniformity.The surface roughness and the surface charge decay are measured to explain the influences of the surface properties and the second electron emission on the discharge uniformity.The results in this work give a comprehensive understanding of the effect of the dielectric materials on the DBD uniformity,and contribute to the selection of dielectric materials for DBD reactor and the realization of atmospheric pressure uniform,stable,and reactive plasma sources.展开更多
In order to advance the understanding of the impact dynamics of granular flow in complex geological settings,this paper studied the impact dynamics of granular flow on rigid barriers with a number of Material Point Me...In order to advance the understanding of the impact dynamics of granular flow in complex geological settings,this paper studied the impact dynamics of granular flow on rigid barriers with a number of Material Point Method(MPM)numerical tests.The impact behavior of granular flow on a rigid barrier was characterized by the initial dynamic impact stage,dynamic surge impact stage,compression impact stage and static stage of granular flow,where the impact force of granular flow was comprised of the dynamic and static forces of granular flow.The impact behavior of granular flow on a rigid barrier was characterized by the states of the fast or slow impact behavior of granular flow.The angle of slope and aspect ratio of granular soil greatly affected the impact behavior of granular flow on a column rigid barrier,where a power model was proposed to quantify the residual(Fnr)-over-maximum(Fnmax)normal impact force ratio of granular flow Fnr⁄Fnmax incorporating the effects of the angle of slope and aspect ratio of granular soil.With the increase of the column rigid barrier up to the semi-infinite column rigid barrier,the impact dynamics of granular flow gradually increased up to a maximum by progressively transforming the overflow into the dynamic surge impact of the incoming flow on the rigid barrier to capture more granular soil of granular flow against the rigid barrier.Presence of water in granular flow,i.e.,a mixture of solid and liquid in granular flow,yielded a dynamic coupling contribution of the solid and liquid,being accompanied by the whole dynamic process of granular flow,on the impact behavior of granular flow on a rigid barrier,where the liquid-phase material of granular flow,i.e.,the water,was predominant to contribute on the normal impact force of granular flow in comparison with the solid-phase material of granular flow.In addition,other factors,e.g.,the shape of rigid barrier(i.e.,the column barrier,arch barrier and circle barrier),and the gravity(i.e.,in the gravitational environment of the Moon,Earth and Mars),greatly affected the impact behavior of granular flow on a rigid barrier as well.展开更多
In order to find more suitable materials as barriers and to improve the thermoelectric properties, p-type (Bi1-xSbx) 2Te3 (x = 0.85, 0.9) two segments compositionally graded thermoelectric materials (CGTM) with differ...In order to find more suitable materials as barriers and to improve the thermoelectric properties, p-type (Bi1-xSbx) 2Te3 (x = 0.85, 0.9) two segments compositionally graded thermoelectric materials (CGTM) with different barriers were fabricated by conventional hot pressure method. Metals Fe, Co, Cu and Al were used as barriers between two segments. The effects of different barriers on thermoelectric properties of CGTM were investigated. The results show that metal Fe is more stable and suitable as the barrier.展开更多
Increased environmental and health concerns over the use of plastic packaging or fluorine-containing coatings,in combination with increased market demand for products with a longer shelf life,make bio-based materials ...Increased environmental and health concerns over the use of plastic packaging or fluorine-containing coatings,in combination with increased market demand for products with a longer shelf life,make bio-based materials one of the most important research candidates for alternative paper packaging materials for oil resistance.These bio-based materials have excellent oxygen and oil barriers,which are critical for food packaging.Moreover,they are biodegradable,naturally renewable,and safe.In this artical,two main groups of bio-based oil repellents for paper food packaging,including polysaccharide-based biopolymers and protein-based biopolymers,are enumerated,and the advantages and weaknesses of bio-based oil repellents are discussed,and effective solutions are proposed.Finally,research status and prospects on the development of bio-based oil-resistant coatings for the food packaging industry are presented.展开更多
Melt-blown polybutylene terephthalate (PBT) nonwoven materials treated by usingplasma is regarded as one of the excellent materials to filter white blood cells (WBC) from blood.In this paper, dielectric barrier discha...Melt-blown polybutylene terephthalate (PBT) nonwoven materials treated by usingplasma is regarded as one of the excellent materials to filter white blood cells (WBC) from blood.In this paper, dielectric barrier discharge (DBD) plasma source at an improved quasi-stable at-mospheric pressure is achieved when discharge voltage, discharge current, and gap between theelectrodes are carefully controlled. This plasma source has been used to modify the surface ofPBT melt-blown nonwoven materials. Experimental results indicate that both the wettablity andpermeation of treated PBT melt-blown nonwoven materials are greatly improved.展开更多
To recognize properties of a mixture of Vistula sand （medium sand acc. to USCS） with Slovak zeolite as reactive materials suitable for permeable reactive barriers proposed for protection of groundwater environment i...To recognize properties of a mixture of Vistula sand （medium sand acc. to USCS） with Slovak zeolite as reactive materials suitable for permeable reactive barriers proposed for protection of groundwater environment in vicinity of old landfills comprehensive laboratory investigations were performed. The present study investigates the removal of contaminants specific for landfill leachates onto zeolite-sand mixtures containing 20%, 50% and 80% of zeolite （ZS20, ZS50 and ZS80）. Taking into account the results of batch tests it was concluded that the Langmuir isotherm best fitted the data. It was observed that the presence of ammonium, calcium and magnesium decreases the removal efficiency of copper by 32%. Column tests of contaminant migration through the attenuation zone of the reactive materials were interpreted using the software package CXTFIT, which solves a one-dimensional advection-dispersion equation. Column test results also indicate the strong influence of the presence of interfering substances on copper immobilisation; dynamic sorption capacities decrees twofold. Throughout the landfill leachate flow through ZS80 sample, a constant reduction of NH＋4 （at 100%）, K＋ （at 93%） and Fe total （at an average of 86%） were observed. There was no reduction in chemical oxygen demand and biochemical oxygen demand.展开更多
The performance of dielectric material is a key factor against a long time action in dielectric barrier discharge （DBD） plasma. In this study, the aging of the Al2O3 dielectric material was studied by the Atomic For...The performance of dielectric material is a key factor against a long time action in dielectric barrier discharge （DBD） plasma. In this study, the aging of the Al2O3 dielectric material was studied by the Atomic Force Microscope （AFM）, X-ray Photoelectron spectrum （XPS） and Auger electron spectrum （AES） methods. The results showerd that the performance of the dielectric does not descend after an 1000 h aging experiment. Therefore the thin dielectric layers of α-Al2O3 porcelain with a purity above 99% can sustain a long time action of DBD plasma and form gas ionization discharges steadily.展开更多
In the present work, a two-dimensional（2D） analytical framework of triple material symmetrical gate stack（TMGS）DG-MOSFET is presented in order to subdue the short channel effects. A lightly doped channel along wit...In the present work, a two-dimensional（2D） analytical framework of triple material symmetrical gate stack（TMGS）DG-MOSFET is presented in order to subdue the short channel effects. A lightly doped channel along with triple material gate having different work functions and symmetrical gate stack structure, showcases substantial betterment in quashing short channel effects to a good extent. The device functioning amends in terms of improved exemption to threshold voltage roll-off, thereby suppressing the short channel effects. The encroachments of respective device arguments on the threshold voltage of the proposed structure are examined in detail. The significant outcomes are compared with the numerical simulation data obtained by using 2D ATLAS;device simulator to affirm and formalize the proposed device structure.展开更多
In this paper, an improved quasi-stable atmospheric pressure dielectric barrier discharge （DBD） plasma source is achieved after carefully controlled discharge voltage and current, discharge power, working gas, treat...In this paper, an improved quasi-stable atmospheric pressure dielectric barrier discharge （DBD） plasma source is achieved after carefully controlled discharge voltage and current, discharge power, working gas, treatment period, and gap between the electrodes. This plasma source has been used to modify the surface of Polybutylene Terephthalate （PBT） melt-blown nonwovens and Polyester （PET） fabrics, and the various influences on surface modification and the aging effect of treated polymeric materials have been systematically investigated. In addition, the method of spectrum analysis is also used for diagnosing plasma paramneters such as electron temperature. Experimental results indicate that both the wettablity and permeation of treated PBT melt-blown nonwovens and dyeing ability of treated PET fabrics are certainly improved.展开更多
To enhance the adhesion of ceramic coatings in turbine blade Thermal Barrier Coatings(TBCs)systems,Laser Surface Texturing(LST)was employed to create microstructures on the metal bond coat.The bonding conditions and f...To enhance the adhesion of ceramic coatings in turbine blade Thermal Barrier Coatings(TBCs)systems,Laser Surface Texturing(LST)was employed to create microstructures on the metal bond coat.The bonding conditions and failure mechanisms of the ceramic coatings within these microstructures were thoroughly investigated.Femtosecond laser technology was used to fabricate three types of high-quality microstructure grooves:linear,sine wave,and grid patterns.These grooves exhibit uniform morphology,well-defined edges,and smooth inner walls.After ceramic coating deposition,columnar crystal structures grew perpendicularly along the groove walls,completely filling the microstructures and forming an arched support structure that significantly enhances mechanical interlocking and adhesion.Among the different microstructures,grid patterns demonstrated the best adhesion performance.In scratch tests,grid-patterned microstructures exhibited only localized small block spalling under high load conditions,avoiding large-scale delamination.This superior performance is attributed to the ability of grid pattern to effectively distribute stress in multiple directions and prevent crack propagation.By reducing stress concentration and enhancing mechanical interlocking points,grid-patterned microstructures also showed excellent resistance to spallation during thermal cycling,markedly improving the thermal resistance and adhesion of coating.展开更多
The ion conductivity of a solid-state ion conductor generally increases exponentially upon reduction in ionmigration barrier.For prevalent cathode material LiCoO_(2),the room-temperature ion conductivity and migration...The ion conductivity of a solid-state ion conductor generally increases exponentially upon reduction in ionmigration barrier.For prevalent cathode material LiCoO_(2),the room-temperature ion conductivity and migrationbarrier are respectively around 10^(−4)S/cm and 0.3 eV.In this Letter,through first-principles calculations we predictthe existence of 1D superionicity as the Li ions in O_(2)LiCoO_(2)are transformed into Zn_(0.5)CoO_(2)or Li_(0.5)CoO_(2)via cation-exchange reaction or deintercalation.The ion migration barriers(0.01-0.02 eV)even lower than roomtemperature∼𝑘B𝑇are reduced by more than an order of magnitude compared with LiCoO_(2),which are facilitatedby facile transition of mobile ions between two coordination configurations.The room-temperature ion conductivityis estimated to be over 50 S/cm,enhanced by 2-3 orders of magnitude compared with the current highestreported value.Such unprecedented superionicity may also exist in other similar layered ion conductors,whichmay lead to technical advances and exotic effects such as ultrafast ion batteries and quantized ferroelectricity.展开更多
基金supported by the Science and Technology Research Project of Henan Province(222102230031)Key Scientific Research Projects of Colleges and Universities in Henan Province(23A430018)Natural Science Foundation of Henan(252300420267).
文摘The current global shortage of oil resources and the pollution problems caused by traditional barrier materials urgently require the search for new substitutes.Biodegradable bio-based barrier materials possess the characteristics of being renewable,environmentally friendly,and having excellent barrier properties.They have become an important choice in fields such as food packaging,agricultural film covering,and medical protection.This review systematically analyzes the design and research of this type of material,classifying biobased and biodegradable barrier materials based on the sources of raw materials and synthesis pathways.It also provides a detailed introduction to the latest research progress of biobased and biodegradable barrier materials,discussing the synthesis methods and improvement measures of their barrier properties.Subsequently,it analyzes the related technologies for enhancing the barrier properties of biobased and biodegradable barrier materials,and finally looks forward to the directions that future research should focus on,promoting the transition of biobased and biodegradable barrier materials from the laboratory to industrial applications.
文摘The aim of this research is to find substitute barrier materials for natural clay from two kinds of municipal sludge: waterworks sludge(S_w) and dredging sludge(S_d). Laboratory tests were performed firstly to determine their Atterberg limits and hydraulic conductivity. Based on the results, the use of waterworks sludge was recommended. Then, shear strength tests were performed and it was found the shear resistance property of waterworks sludge is strong enough to maintain slope stability. In order to evaluate the possibility of secondary pollution, the heavy metal contents of waterworks sludge was determined and the results indicated that secondary pollution is unlikely happened. Finally, economic analysis proves that reusing waterworks sludge as barrier will reduce the lost a great for both landfill and waterworks. Based on the results, waterworks sludge was proposed to use and a further long-term simulated landfill test was suggested.
基金supported by the National Key Research and Development Program(No.2022YFE0122000)National Natural Science Foundation of China under Grant Nos.52234009,52274383,52222409,and 52201113。
文摘Two sets of alloys,Mg-Zn-Ca-xNi(0≤x≤5),have been developed with tunable corrosion and mechanical properties,optimized for fracturing materials.High-zinc artificial aged(T6)Mg-12Zn-0.5Ca-x Ni(0≤x≤5)series,featuring a straightforward preparation method and the potential for manufacturing large-scale components,exhibit notable corrosion rates up to 29 mg cm^(-2)h^(-1)at 25℃ and 643 mg cm^(-2)h^(-1)at 93℃.The high corrosion rate is primary due to the Ni–containing second phases,which intensify the galvanic corrosion that overwhelms their corrosion barrier effect.Low-zinc rolled Mg-1.5Zn-0.2Ca-x Ni(0≤x≤5)series,characterizing excellent deformability with an elongation to failure of~26%,present accelerated corrosion rates up to 34 mg cm^(-2)h^(-1)at 25℃ and 942 mg cm^(-2)h^(-1)at 93℃.The elimination of corrosion barrier effect via deformation contributes to the further increase of corrosion rate compared to the T6 series.Additionally,Mg-Zn-Ca-xNi(0≤x≤5)alloys exhibit tunable ultimate tensile strengths ranging from~190 to~237 MPa,depending on their specific composition.The adjustable corrosion rate and mechanical properties render the Mg-Zn-Ca-x Ni(0≤x≤5)alloys suitable for fracturing materials.
基金financially supported by the National Natural Science Foundation of China (Nos. 51872234, 51502242, 51432008, 51802244, and 51821091)the Key R&D Program of Shaanxi Provence (No. 2019ZDLGY04-02)。
文摘Thermal barrier coating(TBC)materials perform an increasingly important role in the thermal or chemical protection of hot components in a gas turbine.In this study,a novel high entropy hafnate(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) was synthesized by solution combustion method and investigated as a potential TBC layer.The as-synthesized(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) possesses a pure single disordered fluorite phase with a highly homogeneous distribution of rare earth(RE)cations,exhibiting prominent phase stability and excellent chemical compatibility with Al_(2)O_(3) even at 1300°C.Moreover,(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) demonstrates a more sluggish grain growth rate than Y_(2)Hf_(2)O_(7).The thermal conductivity of(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7)(0.73-0.93 W m^(-1)K^(-1))is smaller than those of components RE_(2)Hf_(2)O_(7) and many high entropy TBC materials.Beside,the calculated thermal expansion coefficient(TEC)of(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7)(10.68×10^(-6)/K,1100°C)is smaller than that of yttriastabilized zirconia(YSZ).Based on the results of this work,(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) is suitable for the next generation TBC materials with outstanding properties.
基金This work is supported by the National Natural Science Foundation of China (No.60176004)the National High-Tech Research and Development Program of China (No.2002AA302406).
文摘The p-type （Bi0.15Sb0.85）2Te3 and PbTe are typical thermoelectric materials used for low and middle temperature range and functional graded materials （FGM） is an inevitable way to widen the working temperature range. Here two segments graded thermoelectric materials （GTM） consisting of （Bi0.15Sb0.85）2Te3, PbTe and different barriers were fabricated by the common hot pressure method. Metals Fe, Mg and Ni were used as barriers between the two segments. The diffusion of different barriers between the barriers and bases were analyzed by electron microprobe analysis （EMA）. The phase and crystal structures were determined by X-ray diffraction analysis （XRD）. The thermoelectric properties were measured at 303 K along the direction parallel to the pressing direction. The results show that the compositional diffusion occurs when there is no barrier at the interface of the two segments, and the diffusion of Pb is most obvious; as the barrier material, the diffusion of metals Fe, Mg and Ni between different bases is not very obvious, and the thermoelectric properties of GTM is much better than that of the original segment.
基金the financial support from National Natural Science Foundation of China(No.51976093)K C Wong Magna Fund in Ningbo University。
文摘In this article,plasma-assisted NH;synthesis directly from N;and H;over packing materials with different dielectric constants(BaTiO_(2),TiO_(2) and SiO_(2))and thermal conductivities(Be O,Al N and Al_(2)O_(2))at room temperature and atmospheric pressure is reported.The higher dielectric constant and thermal conductivity of packing material are found to be the key parameters in enhancing the NH;synthesis performance.The NH;concentration of 1344 ppm is achieved in the presence of BaTiO_(2),which is 106%higher than that of SiO_(2),at the specific input energy(SIE)of 5.4 k J·l^(-1).The presence of materials with higher dielectric constant,i.e.BaTiO_(2) and TiO_(2)in this work,would contribute to the increase of electron energy and energy injected to plasma,which is conductive to the generation of chemically active species by electron-impact reactions.Therefore,the employment of packing materials with higher dielectric constant has proved to be beneficial for NH;synthesis.Compared to that of Al_(2)O_(3),the presence of Be O and Al N yields 31.0%and 16.9%improvement in NH;concentration,respectively,at the SIE of5.4 k J·l^(-1).The results of IR imaging show that the addition of Be O decreases the surface temperature of the packed region by 20.5%to 70.3℃ and results in an extension of entropy increment compared to that of Al_(2)O_(3),at the SIE of 5.4 k J·l^(-1).The results indicate that the presence of materials with higher thermal conductivity is beneficial for NH;synthesis,which has been confirmed by the lower surface temperature and higher entropy increment of the packed region.In addition,when SIE is higher than the optimal value,further increasing SIE would lead to the decrease of energy efficiency,which would be related to the exacerbation in reverse reaction of NH;formation reactions.
基金supported by Public Welfare Special Research of National Environmental Protection of China (No. 201309004)
文摘In this paper, with K＋, Ca2＋ and Fe3＋ as the objects of study, retardation of soil-bentonite （SB） barrier materials for metal ions with different valences is investigated, and the adsorption mechanism, migration patterns and permeation behavior are explored so as to provide a theoretical basis for their application. The results show that the adsorption process for metal ions with different valences by SB barrier materials is fast, and the higher the valence, the greater the adsorption capacity. The fitting of the adsorption process conforms to pseudo-second-order adsorption kinetics and Langmuir-Freundlich adsorption equation, which explains that chemical adsorption is the dominating state and that the SB surface has certain heterogeneity. The permeability coefficient of K＋, Ca2＋ and Fe3＋ in SB each has a maximum and the higher the valence, the sooner the maximum appears. Also the higher the valence, the more obvious the effect on SB retardation performance; and the sooner the ion breaks through the barrier wall completely, that is, the wall＇s retardation performance for higher valent ions may decline.
基金the funding support from Natural Sciences and Engineering Research Council of Canada (NSERC)
文摘Compacted bentonite-sand(B/S)mixtures have been used as a barrier material in engineered barrier systems(EBSs)of deep geological repositories(DGR)to store nuclear wastes.This study investigates the individual and combined effects of different chemical compositions of deep groundwaters(chemical factor)at potential repository sites in Canada(the Trenton and Guelph regions in Ontario),heat generated in DGRs(thermal factor),dry densities and mass ratios of bentonite and sand mixtures(physical factors)on the swelling behavior and ability of bentonite-based materials.In this study,swelling tests are conducted on B/S mixtures with different B/S mix ratios(20/80 to 70/30),compacted at different dry densities(ρd=1.6-2 g/cm^(3)),saturated with different types of water(distilled water and simulated deep groundwater of Trenton and Guelph)and exposed to different temperatures(20℃-80℃).Moreover,scanning electron microscopy(SEM)analyses,mercury intrusion porosimetry(MIP)tests and X-ray diffractometry(XRD)analyses are carried out to evaluate the morphological,microstructural and mineralogical characteristics of the B/S mixtures.The test results indicate that the swelling potential of the B/S mixtures is significantly affected by these physical and chemical factors as well as the combined effects of the chemical and thermal factors.A significant decrease in the swelling capacity is observed when the B/S materials are exposed to the aforementioned groundwaters.A large decrease in the swelling capacity is observed for higher bentonite content in the mixtures.Moreover,higher temperatures intensify the chemically-induced reduction of the swelling capacity of the B/S barrier materials.This decrease in the swelling capacity is caused by the chemical and/or microstructural changes of the materials.The results from this research will help engineers to design and build EBSs for DGRs with similar groundwater and thermal conditions.
基金supported by the National Natural Science Foundation of China(Nos.U23A20562 and 52302074).
文摘CrTaO_(4)has been found to play a pivotal role in the protection of refractory high-entropy alloys(RHEAs)from high-temperature oxidation and thermal attack due to its high melting point,low thermal conductivity,close thermal expansion coefficient(TEC)to RHEAs.These appealing properties enable CrTaO_(4)as a new type of protective scale material for high-temperature applications such as in air breathing jet engines.For such engine applications,CaO-MgO-Al_(2)O_(3)-SiO_(2)(CMAS)corrosion is a critical issue.However,the corrosion behavior of CrTaO_(4)under CMAS attack remains unknown so far.Here,the corrosion resistance of CrTaO_(4)to molten CMAS is comprehensively studied.It is demonstrated that the CMAS corrosion resistance is significantly superior over commercial yttria-stabilized zirconia and the commonly investigated thermal barrier coating materials.Element and phase compositional analyses indicate dense and CMAS corrosion-resistant layers are established between CMAS and the CrTaO_(4)substrate.The interface reaction between the CrTaO_(4)substrate and CMAS at 1250 and 1300℃gives rise to a dense layer composed of CaTa_(2)O_(6) and Mg(Cr,Al)_(2)O_(4)spinel just beneath the molten CMAS.At 1350℃,a phase composition gradient layer,composed of crystalline phases CaTa_(2)O_(6)/CaTa_(2)O_(6)+Mg(Cr,Al)_(2)O_(4)/CaTa_(2)O_(6)+Cr2O_(3),is formed.With increased calcium consumption due to more Ca-containing crystalline phase formation upon elevating temperature,the Ca/Si ratio in CMAS melt declines,thereby increasing the viscosity of the melt and mitigating the penetration of CMAS into the CrTaO_(4)substrate.
基金supported by National Natural Science Foundation of China(Nos.52037004 and 52177148)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX23_1449).
文摘Dielectric barrier discharge(DBD)is considered as a promising technique to produce large volume uniform plasma at atmospheric pressure,and the dielectric barrier layer between the electrodes plays a key role in the DBD processes and enhancing discharge uniformity.In this work,the uniformity and discharge characteristics of the nanosecond(ns)pulsed DBD with dielectric barrier layers made of alumina,quartz glass,polycarbonate(PC),and polypropylene(PP)are investigated via discharge image observation,voltage-current waveform measurement and optical emission spectral diagnosis.Through analyzing discharge image by gray value standard deviation method,the discharge uniformity is quantitatively calculated.The effects of the space electric field intensity,the electron density(Ne),and the space reactive species on the uniformity are studied with quantifying the gap voltage Ug and the discharge current Ig,analyzing the recorded optical emission spectra,and simulating the temporal distribution of Ne with a one-dimensional fluid model.It is found that as the relative permittivity of the dielectric materials increases,the space electric field intensity is enhanced,which results in a higher Ne and electron temperature(Te).Therefore,an appropriate value of space electric field intensity can promote electron avalanches,resulting in uniform and stable plasma by the merging of electron avalanches.However,an excessive value of space electric field intensity leads to the aggregation of space charges and the distortion of the space electric field,which reduce the discharge uniformity.The surface roughness and the surface charge decay are measured to explain the influences of the surface properties and the second electron emission on the discharge uniformity.The results in this work give a comprehensive understanding of the effect of the dielectric materials on the DBD uniformity,and contribute to the selection of dielectric materials for DBD reactor and the realization of atmospheric pressure uniform,stable,and reactive plasma sources.
基金supported by the Sichuan Science and Technology Program - China (Grant no. 2023ZYD0149)National Natural Science Foundation of China (Grant no. U22A20603)CAS "Light of West China" Program - China (Grant No. Fangwei Yu)
文摘In order to advance the understanding of the impact dynamics of granular flow in complex geological settings,this paper studied the impact dynamics of granular flow on rigid barriers with a number of Material Point Method(MPM)numerical tests.The impact behavior of granular flow on a rigid barrier was characterized by the initial dynamic impact stage,dynamic surge impact stage,compression impact stage and static stage of granular flow,where the impact force of granular flow was comprised of the dynamic and static forces of granular flow.The impact behavior of granular flow on a rigid barrier was characterized by the states of the fast or slow impact behavior of granular flow.The angle of slope and aspect ratio of granular soil greatly affected the impact behavior of granular flow on a column rigid barrier,where a power model was proposed to quantify the residual(Fnr)-over-maximum(Fnmax)normal impact force ratio of granular flow Fnr⁄Fnmax incorporating the effects of the angle of slope and aspect ratio of granular soil.With the increase of the column rigid barrier up to the semi-infinite column rigid barrier,the impact dynamics of granular flow gradually increased up to a maximum by progressively transforming the overflow into the dynamic surge impact of the incoming flow on the rigid barrier to capture more granular soil of granular flow against the rigid barrier.Presence of water in granular flow,i.e.,a mixture of solid and liquid in granular flow,yielded a dynamic coupling contribution of the solid and liquid,being accompanied by the whole dynamic process of granular flow,on the impact behavior of granular flow on a rigid barrier,where the liquid-phase material of granular flow,i.e.,the water,was predominant to contribute on the normal impact force of granular flow in comparison with the solid-phase material of granular flow.In addition,other factors,e.g.,the shape of rigid barrier(i.e.,the column barrier,arch barrier and circle barrier),and the gravity(i.e.,in the gravitational environment of the Moon,Earth and Mars),greatly affected the impact behavior of granular flow on a rigid barrier as well.
基金[This work is financially supported by National Natural Science Foundation of China (No. 59772012 and 50042014).]
文摘In order to find more suitable materials as barriers and to improve the thermoelectric properties, p-type (Bi1-xSbx) 2Te3 (x = 0.85, 0.9) two segments compositionally graded thermoelectric materials (CGTM) with different barriers were fabricated by conventional hot pressure method. Metals Fe, Co, Cu and Al were used as barriers between two segments. The effects of different barriers on thermoelectric properties of CGTM were investigated. The results show that metal Fe is more stable and suitable as the barrier.
文摘Increased environmental and health concerns over the use of plastic packaging or fluorine-containing coatings,in combination with increased market demand for products with a longer shelf life,make bio-based materials one of the most important research candidates for alternative paper packaging materials for oil resistance.These bio-based materials have excellent oxygen and oil barriers,which are critical for food packaging.Moreover,they are biodegradable,naturally renewable,and safe.In this artical,two main groups of bio-based oil repellents for paper food packaging,including polysaccharide-based biopolymers and protein-based biopolymers,are enumerated,and the advantages and weaknesses of bio-based oil repellents are discussed,and effective solutions are proposed.Finally,research status and prospects on the development of bio-based oil-resistant coatings for the food packaging industry are presented.
基金The project supported by Dong Hua University Shanghai Science and Technological Research Council (No. 0252nm110), "Dawn Project" of Shanghai Municipal Education Commission (No. 02SG28) and Ministry of Education Science and Technological Research Emphasis
文摘Melt-blown polybutylene terephthalate (PBT) nonwoven materials treated by usingplasma is regarded as one of the excellent materials to filter white blood cells (WBC) from blood.In this paper, dielectric barrier discharge (DBD) plasma source at an improved quasi-stable at-mospheric pressure is achieved when discharge voltage, discharge current, and gap between theelectrodes are carefully controlled. This plasma source has been used to modify the surface ofPBT melt-blown nonwoven materials. Experimental results indicate that both the wettablity andpermeation of treated PBT melt-blown nonwoven materials are greatly improved.
基金supported by Grants no. 2P04G 088 29 and N N523 561638 from the Ministry of Science and Higher Education, Warsaw, Poland
文摘To recognize properties of a mixture of Vistula sand （medium sand acc. to USCS） with Slovak zeolite as reactive materials suitable for permeable reactive barriers proposed for protection of groundwater environment in vicinity of old landfills comprehensive laboratory investigations were performed. The present study investigates the removal of contaminants specific for landfill leachates onto zeolite-sand mixtures containing 20%, 50% and 80% of zeolite （ZS20, ZS50 and ZS80）. Taking into account the results of batch tests it was concluded that the Langmuir isotherm best fitted the data. It was observed that the presence of ammonium, calcium and magnesium decreases the removal efficiency of copper by 32%. Column tests of contaminant migration through the attenuation zone of the reactive materials were interpreted using the software package CXTFIT, which solves a one-dimensional advection-dispersion equation. Column test results also indicate the strong influence of the presence of interfering substances on copper immobilisation; dynamic sorption capacities decrees twofold. Throughout the landfill leachate flow through ZS80 sample, a constant reduction of NH＋4 （at 100%）, K＋ （at 93%） and Fe total （at an average of 86%） were observed. There was no reduction in chemical oxygen demand and biochemical oxygen demand.
基金supported by National Natural Science Foundation of China(No.60371035)Special Prophase Project on Basic Research of National Commission of Science and Technology(No.2004ccA06300)Project of Social Development of Dalian City(No.2004B3SF181)
文摘The performance of dielectric material is a key factor against a long time action in dielectric barrier discharge （DBD） plasma. In this study, the aging of the Al2O3 dielectric material was studied by the Atomic Force Microscope （AFM）, X-ray Photoelectron spectrum （XPS） and Auger electron spectrum （AES） methods. The results showerd that the performance of the dielectric does not descend after an 1000 h aging experiment. Therefore the thin dielectric layers of α-Al2O3 porcelain with a purity above 99% can sustain a long time action of DBD plasma and form gas ionization discharges steadily.
文摘In the present work, a two-dimensional（2D） analytical framework of triple material symmetrical gate stack（TMGS）DG-MOSFET is presented in order to subdue the short channel effects. A lightly doped channel along with triple material gate having different work functions and symmetrical gate stack structure, showcases substantial betterment in quashing short channel effects to a good extent. The device functioning amends in terms of improved exemption to threshold voltage roll-off, thereby suppressing the short channel effects. The encroachments of respective device arguments on the threshold voltage of the proposed structure are examined in detail. The significant outcomes are compared with the numerical simulation data obtained by using 2D ATLAS;device simulator to affirm and formalize the proposed device structure.
文摘In this paper, an improved quasi-stable atmospheric pressure dielectric barrier discharge （DBD） plasma source is achieved after carefully controlled discharge voltage and current, discharge power, working gas, treatment period, and gap between the electrodes. This plasma source has been used to modify the surface of Polybutylene Terephthalate （PBT） melt-blown nonwovens and Polyester （PET） fabrics, and the various influences on surface modification and the aging effect of treated polymeric materials have been systematically investigated. In addition, the method of spectrum analysis is also used for diagnosing plasma paramneters such as electron temperature. Experimental results indicate that both the wettablity and permeation of treated PBT melt-blown nonwovens and dyeing ability of treated PET fabrics are certainly improved.
基金supported by the National Science and Technology Major Project,China(No.J2019-VII-0013-0153)the Sichuan Science and Technology Program,China(Nos.2021ZDZX0001 and 2021ZDZX0002)。
文摘To enhance the adhesion of ceramic coatings in turbine blade Thermal Barrier Coatings(TBCs)systems,Laser Surface Texturing(LST)was employed to create microstructures on the metal bond coat.The bonding conditions and failure mechanisms of the ceramic coatings within these microstructures were thoroughly investigated.Femtosecond laser technology was used to fabricate three types of high-quality microstructure grooves:linear,sine wave,and grid patterns.These grooves exhibit uniform morphology,well-defined edges,and smooth inner walls.After ceramic coating deposition,columnar crystal structures grew perpendicularly along the groove walls,completely filling the microstructures and forming an arched support structure that significantly enhances mechanical interlocking and adhesion.Among the different microstructures,grid patterns demonstrated the best adhesion performance.In scratch tests,grid-patterned microstructures exhibited only localized small block spalling under high load conditions,avoiding large-scale delamination.This superior performance is attributed to the ability of grid pattern to effectively distribute stress in multiple directions and prevent crack propagation.By reducing stress concentration and enhancing mechanical interlocking points,grid-patterned microstructures also showed excellent resistance to spallation during thermal cycling,markedly improving the thermal resistance and adhesion of coating.
基金supported by the National Natural Science Foundation of China(Grant No.22073034)。
文摘The ion conductivity of a solid-state ion conductor generally increases exponentially upon reduction in ionmigration barrier.For prevalent cathode material LiCoO_(2),the room-temperature ion conductivity and migrationbarrier are respectively around 10^(−4)S/cm and 0.3 eV.In this Letter,through first-principles calculations we predictthe existence of 1D superionicity as the Li ions in O_(2)LiCoO_(2)are transformed into Zn_(0.5)CoO_(2)or Li_(0.5)CoO_(2)via cation-exchange reaction or deintercalation.The ion migration barriers(0.01-0.02 eV)even lower than roomtemperature∼𝑘B𝑇are reduced by more than an order of magnitude compared with LiCoO_(2),which are facilitatedby facile transition of mobile ions between two coordination configurations.The room-temperature ion conductivityis estimated to be over 50 S/cm,enhanced by 2-3 orders of magnitude compared with the current highestreported value.Such unprecedented superionicity may also exist in other similar layered ion conductors,whichmay lead to technical advances and exotic effects such as ultrafast ion batteries and quantized ferroelectricity.
