In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220...In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220 kV and a length of 250 km. These overhead power lines (L-213, L-214) connect the 220/110/35 kV “Songino” substation with the “Mandal” substation and form system networks. This paper presents the challenges encountered when implementing single-phase automatic reclosing (SPAR) devices and compares the changes in power system parameters before and after SPAR deployment for a long 220 kV line. Simulations and analyses were carried out using DIgSILENT PowerFactory software, focusing on rotor angle stability, and the overall impact on the power system during short-circuit faults. The evaluation also utilized measurement data from the Wide Area Monitoring System (WAMS) to compare system behavior pre- and post-implementation of SPAR. The findings reveal that SPAR significantly enhances system reliability and stability, effectively mitigating the risk of oscillations and stability loss triggered by short circuits. This improvement contributes to a more resilient power system, reducing the potential for disturbances caused by faults.展开更多
Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive cont...Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive control(MPC),which utilizes an extensive mathe-matical model of the voltage regulation system to optimize the control actions over a defined prediction horizon.This predictive feature enables MPC to minimize voltage deviations while accounting for operational constraints,thereby improving stability and performance under dynamic conditions.Thefindings were compared with those derived from an optimal proportional integral derivative(PID)con-troller designed using the artificial bee colony(ABC)algorithm.Although the ABC-PID method adjusts the PID parameters based on historical data,it may be difficult to adapt to real-time changes in system dynamics under constraints.Comprehensive simulations assessed both frameworks,emphasizing performance metrics such as disturbance rejection,response to load changes,and resilience to uncertainties.The results show that both MPC and ABC-PID methods effectively achieved accurate voltage regulation;however,MPC excelled in controlling overshoot and settling time—recording 0.0%and 0.25 s,respectively.This demonstrates greater robustness compared to conventional control methods that optimize PID parameters based on performance criteria derived from actual system behavior,which exhibited settling times and overshoots exceeding 0.41 s and 5.0%,respectively.The controllers were implemented using MATLAB/Simulink software,indicating a significant advancement for power plant engineers pursuing state-of-the-art automatic voltage regulations.展开更多
BACKGROUND A total of 100 patients diagnosed with mixed hemorrhoids from October 2022 to September 2023 in our hospital were randomly divided into groups by dice rolling and compared with the efficacy of different tre...BACKGROUND A total of 100 patients diagnosed with mixed hemorrhoids from October 2022 to September 2023 in our hospital were randomly divided into groups by dice rolling and compared with the efficacy of different treatment options.AIM To analyze the clinical effect and prognosis of mixed hemorrhoids treated with polidocanol injection combined with automatic elastic thread ligation operation(RPH).METHODS A total of 100 patients with mixed hemorrhoids who visited our hospital from October 2022 to September 2023 were selected and randomly divided into the control group(n=50)and the treatment group(n=50)by rolling the dice.The procedure for prolapse and hemorrhoids(PPH)was adopted in the control group,while polidocanol foam injection+RPH was adopted in the treatment group.The therapeutic effects,operation time,wound healing time,hospital stay,pain situation(24 hours post-operative pain score,first defecation pain score),quality of life(QOL),incidence of complications(post-operative hemorrhage,edema,infection),incidence of anal stenosis 3 months post-operatively and recurrence rate 1 year post-operatively of the two groups were compared.RESULTS Compared with the control group,the total effective rate of treatment group was higher,and the difference was significant(P<0.05).The operation time/wound healing time/hospital stay in the treatment group were shorter than those in the control group(P<0.05).The pain scores at 24 hours after operation/first defecation pain score of the treatment group was significantly lower than those in the control group(P<0.05).After surgery,the QOL scores of the two groups decreased,with the treatment group having higher scores than that of the control group(P<0.05).Compared with the control group,the incidence of postoperative complications in the treatment group was lower,and the difference was significant(P<0.05);However,there was no significant difference in the incidence of postoperative bleeding between the two groups(P>0.05);There was no significant difference in the incidence of anal stenosis 3 months after operation and the recurrence rate 1 year after operation between the two groups(P>0.05).CONCLUSION For patients with mixed hemorrhoids,the therapeutic effect achieved by using polidocanol injection combined with RPH was better.The wounds of the patients healed faster,the postoperative pain was milder,QOL improved,and the incidence of complications was lower,and the short-term and long-term prognosis was good.展开更多
BACKGROUND Depression is a leading global health concern with high suicide rates and recurrence.Cognitive models suggest that mental pain and automatic thoughts are central to depression's impact.The hypothesis is...BACKGROUND Depression is a leading global health concern with high suicide rates and recurrence.Cognitive models suggest that mental pain and automatic thoughts are central to depression's impact.The hypothesis is that self-compassion will be negatively associated with mental pain,mediated by automatic thoughts.AIM To determine the mediating role of automatic thoughts in the relationship between self-compassion and mental pain in individuals with depression.METHODS This cross-sectional study included 389 inpatients with depression from Tianjin Anding Hospital.Participants completed the Self-Compassion Scale-Chinese Version(SCS-C),Automatic Thought Questionnaire(ATQ),and Orbach&Mikulincer Mental Pain Scale-Chinese Version(OMMP).Data were analyzed using Pearson correlations,multiple linear regressions,and mediation analysis.RESULTS The SCS-C total score was 68.95±14.89,ATQ was 87.02±28.91,and OMMP was 129.01±36.74.Correlation analysis showed mental pain was positively associated with automatic thoughts(r=0.802,P<0.001)and negatively with selfcompassion(r=-0.636,P<0.001).Regression analysis indicated automatic thoughts(β=0.623,P<0.001)and self-compassion(β=-0.301,P<0.001)significantly predicted mental pain.Mediation analysis confirmed automatic thoughts partially mediated the relationship between self-compassion and mental pain(ab=-0.269,95%CI:-0.363 to-0.212).CONCLUSION Self-compassion is inversely related to mental pain in depression,with automatic thoughts playing a mediating role.These findings suggest potential therapeutic targets for alleviating mental pain in depressed patients.展开更多
In this paper,the author follows the trail of C.Malabou,Q.Meillassoux,and G.Deleuze and tries to test three philosophical concepts that seem to be particularly threatened in the era of automatic digital reproduction.T...In this paper,the author follows the trail of C.Malabou,Q.Meillassoux,and G.Deleuze and tries to test three philosophical concepts that seem to be particularly threatened in the era of automatic digital reproduction.These three concepts are plasticity(defended for many years by C.Malabou),contingency(reconstructed by Q.Meillassoux),and virtuality(developed by G.Deleuze).The main task of the text will be to reflect on which of these three concepts better protects our thinking against automation and stays faithful to the ideal of creativity.In what sense are plasticity,contingency,and the possibility of virtualization the a priori condition of any transformation,physical or intellectual,affective or conceptual metamorphosis?In what sense are these three concepts the only conditions for the survival of every living being?Would a being without contingency,plasticity,and disposition to virtualization simply be a dead being?展开更多
Computer-vision and deep-learning techniques are widely applied to detect,monitor,and assess pavement conditions including road crack detection.Traditional methods fail to achieve satisfactory accuracy and generalizat...Computer-vision and deep-learning techniques are widely applied to detect,monitor,and assess pavement conditions including road crack detection.Traditional methods fail to achieve satisfactory accuracy and generalization performance in for crack detection.Complex network model can generate redundant feature maps and computational complexity.Therefore,this paper proposes a novel model compression framework based on deep learning to detect road cracks,which can improve the detection efficiency and accuracy.A distillation loss function is proposed to compress the teacher model,followed by channel pruning.Meanwhile,a multi-dilation model is proposed to improve the accuracy of the model pruned.The proposed method is tested on the public database CrackForest dataset(CFD).The experimental results show that the proposed method is more efficient and accurate than other state-of-art methods.展开更多
A rotary sealing device that automatically compensates for wear is designed to address the issues of easy wear and the short service life of the rotary sealing device with automatic wear compensation in mining machine...A rotary sealing device that automatically compensates for wear is designed to address the issues of easy wear and the short service life of the rotary sealing device with automatic wear compensation in mining machinery.After the end face of the guide sleeve wears out,it still tightly adheres to the sealing valve seat under the pressure difference,achieving automatic wear compensation.Based on fluid-solid coupling technology,the structural strength of the rotary sealing device was checked.The influence of factors on the sealing performance of rotary sealing devices was studied using the control variable method.The results show that as the pressure of water increases,the leakage rate of the sealing device decreases,and after 30 MPa,the leakage rate is almost 0 mL/h.The temperature of the rotating sealing device increases with the increase of rotation speed or pressure,and the temperature is more affected by the rotation speed factor.The frictional torque increases with increasing pressure and is independent of rotational speed.Comprehensive analysis shows that the wear resistance and reliability level of the sealing guide sleeve material is PVDF>PEEK>PE>PA.This study designs a high-pressure automatic compensation wear rotary sealing device and selects the optimal sealing material,providing technical support for the application of high-pressure water jet in mining machinery.展开更多
Cabin cables,as critical components of an aircraft's electrical system,significantly impact the operational efficiency and safety of the aircraft.The existing cable segmentation methods in civil aviation cabins ar...Cabin cables,as critical components of an aircraft's electrical system,significantly impact the operational efficiency and safety of the aircraft.The existing cable segmentation methods in civil aviation cabins are limited,especially in automation,heavily dependent on large amounts of data and resources,lacking the flexibility to adapt to different scenarios.To address these challenges,this paper introduces a novel image segmentation model,CableSAM,specifically designed for automated segmentation of cabin cables.CableSAM improves segmentation efficiency and accuracy using knowledge distillation and employs a context ensemble strategy.It accurately segments cables in various scenarios with minimal input prompts.Comparative experiments on three cable datasets demonstrate that CableSAM surpasses other advanced cable segmentation methods in performance.展开更多
Imaging evaluation of lymph node metastasis and infiltration faces problems such as low artificial outline efficiency and insufficient consistency.Deep learning technology based on convolutional neural networks has gr...Imaging evaluation of lymph node metastasis and infiltration faces problems such as low artificial outline efficiency and insufficient consistency.Deep learning technology based on convolutional neural networks has greatly improved the technical effect of radiomics in lymph node pathological characteristics analysis and efficacy monitoring through automatic lymph node detection,precise segmentation and three-dimensional reconstruction algorithms.This review focuses on the automatic lymph node segmentation model,treatment response prediction algorithm and benign and malignant differential diagnosis system for multimodal imaging,in order to provide a basis for further research on artificial intelligence to assist lymph node disease management and clinical decision-making,and provide a reference for promoting the construction of a system for accurate diagnosis,personalized treatment and prognostic evaluation of lymph node-related diseases.展开更多
With the development of machine translation technology,automatic pre-editing has attracted increasing research attention for its important role in improving translation quality and efficiency.This study utilizes UAM C...With the development of machine translation technology,automatic pre-editing has attracted increasing research attention for its important role in improving translation quality and efficiency.This study utilizes UAM Corpus Tool 3.0 to annotate and categorize 99 key publications between 1992 and 2024,tracing the research paths and technological evolution of automatic pre-translation editing.The study finds that current approaches can be classified into four categories:controlled language-based approaches,text simplification approaches,interlingua-based approaches,and large language model-driven approaches.By critically examining their technical features and applicability in various contexts,this review aims to provide valuable insights to guide the future optimization and expansion of pre-translation editing systems.展开更多
Esophageal cancer(EC),a common malignant tumor of the digestive tract,requires early diagnosis and timely treatment to improve patient prognosis.Automated detection of EC using medical imaging has the potential to inc...Esophageal cancer(EC),a common malignant tumor of the digestive tract,requires early diagnosis and timely treatment to improve patient prognosis.Automated detection of EC using medical imaging has the potential to increase screening efficiency and diagnostic accuracy,thereby significantly improving long-term survival rates and the quality of life of patients.Recent advances in deep learning(DL),particularly convolutional neural networks,have demons-trated remarkable performance in medical imaging analysis.These techniques have shown significant progress in the automated identification of malignant tumors,quantitative analysis of lesions,and improvement in diagnostic accuracy and efficiency.This article comprehensively examines the research progress of DL in medical imaging for EC,covering various imaging modalities such as digital pathology,endoscopy,computed tomography,etc.It explores the clinical value and application prospects of DL in EC screening and diagnosis.Additionally,the article addresses several critical challenges that must be overcome for the clinical translation of DL techniques,including constructing high-quality datasets,promoting multimodal feature fusion,and optimizing artificial intelligence-clinical workflow integration.By providing a detailed overview of the current state of DL in EC imaging and highlighting the key challenges and future directions,this article aims to guide future research and facilitate the clinical implementation of DL technologies in EC management,ultimately contributing to better patient outcomes.展开更多
Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper ...Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper proposes an Adaptive Terminal Sliding Combined Super TwistingControl(ATS-STC)method to address the issues of low precision,slow convergence,and poor dis-turbance rejection capability resulting from external disturbances,such as carrier air-wake and deckmotion.By introducing a nonlinear term into the sliding surface and employing an integralapproach,the proposed ATS-STC method can ensure finite-time convergence and mitigate the chat-tering problem.An adaptive law is also utilized to estimate the external disturbances,therebyenhancing the anti-disturbance performance.Then,the stability and convergence time analysis ofthe designed controller are conducted.Based on the proposed method,an Automatic Carrier Land-ing System(ACLS)is developed to perform the carrier landing control task.Furthermore,a multi-dimensional validation is carried out.For the numerical simulation test,the Terminal Sliding ModeControl(TSMC)method and Proportion Integration Differentiation(PID)method are introducedas comparison,the quantitative assessment results show that the tracking error of TSMC and PIDcan reach 1.5 times and 2 times that of the proposed method.Finally,the Hardware-in-the-Loop(HIL)test and real flight test are conducted.All the experimental results demonstrate that the pro-posed control method is more effective and precise.展开更多
Traditional calibration method for the digital inclinometer relies on manual inspection,and results in its disadvantages of complicated process,low-efficiency and human errors easy to be introduced.To improve both the...Traditional calibration method for the digital inclinometer relies on manual inspection,and results in its disadvantages of complicated process,low-efficiency and human errors easy to be introduced.To improve both the calibration accuracy and efficiency of digital inclinometer,an automatic digital inclinometer calibration system was developed in this study,and a new display tube recognition algorithm was proposed.First,a high-precision automatic turntable was taken as the reference to calculate the indication error of the inclinometer.Then,the automatic inclinometer calibration control process and the digital inclinometer zero-setting function were formulated.For display tube recognition,a new display tube recognition algorithm combining threading method and feature extraction method was proposed.Finally,the calibration system was calibrated by photoelectric autocollimator and regular polygon mirror,and the calibration system error and repeatability were calculated via a series of experiments.The experimental results showed that the indication error of the proposed calibration system was less than 4",and the repeatability was 3.9".A digital inclinometer with the resolution of 0.1°was taken as a testing example,within the calibration points'range of[-90°,90°],the repeatability of the testing was 0.085°,and the whole testing process was less than 90 s.The digital inclinometer indication error is mainly introduced by the digital inclinometer resolution according to the uncertainty evaluation.展开更多
The success of robot-assisted pelvic fracture reduction surgery heavily relies on the accuracy of 3D/3D feature-based registration.This process involves extracting anatomical feature points from pre-operative 3D image...The success of robot-assisted pelvic fracture reduction surgery heavily relies on the accuracy of 3D/3D feature-based registration.This process involves extracting anatomical feature points from pre-operative 3D images which can be challenging because of the complex and variable structure of the pelvis.PointMLP_RegNet,a modified PointMLP,was introduced to address this issue.It retains the feature extraction module of PointMLP but replaces the classification layer with a regression layer to predict the coordinates of feature points instead of conducting regular classification.A flowchart for an automatic feature points extraction method was presented,and a series of experiments was conducted on a clinical pelvic dataset to confirm the accuracy and effectiveness of the method.PointMLP_RegNet extracted feature points more accurately,with 8 out of 10 points showing less than 4 mm errors and the remaining two less than 5 mm.Compared to PointNettt and PointNet,it exhibited higher accuracy,robustness and space efficiency.The proposed method will improve the accuracy of anatomical feature points extraction,enhance intra-operative registration precision and facilitate the widespread clinical application of robot-assisted pelvic fracture reduction.展开更多
AIM:To develop different machine learning models to train and test diplopia images and data generated by the computerized diplopia test.METHODS:Diplopia images and data generated by computerized diplopia tests,along w...AIM:To develop different machine learning models to train and test diplopia images and data generated by the computerized diplopia test.METHODS:Diplopia images and data generated by computerized diplopia tests,along with patient medical records,were retrospectively collected from 3244 cases.Diagnostic models were constructed using logistic regression(LR),decision tree(DT),support vector machine(SVM),extreme gradient boosting(XGBoost),and deep learning(DL)algorithms.A total of 2757 diplopia images were randomly selected as training data,while the test dataset contained 487 diplopia images.The optimal diagnostic model was evaluated using test set accuracy,confusion matrix,and precision-recall curve(P-R curve).RESULTS:The test set accuracy of the LR,SVM,DT,XGBoost,DL(64 categories),and DL(6 binary classifications)algorithms was 0.762,0.811,0.818,0.812,0.858 and 0.858,respectively.The accuracy in the training set was 0.785,0.815,0.998,0.965,0.968,and 0.967,respectively.The weighted precision of LR,SVM,DT,XGBoost,DL(64 categories),and DL(6 binary classifications)algorithms was 0.74,0.77,0.83,0.80,0.85,and 0.85,respectively;weighted recall was 0.76,0.81,0.82,0.81,0.86,and 0.86,respectively;weighted F1 score was 0.74,0.79,0.82,0.80,0.85,and 0.85,respectively.CONCLUSION:In this study,the 7 machine learning algorithms all achieve automatic diagnosis of extraocular muscle palsy.The DL(64 categories)and DL(6 binary classifications)algorithms have a significant advantage over other machine learning algorithms regarding diagnostic accuracy on the test set,with a high level of consistency with clinical diagnoses made by physicians.Therefore,it can be used as a reference for diagnosis.展开更多
Modern automated generation control(AGC)is increasingly complex,requiring precise frequency control for stability and operational accuracy.Traditional PID controller optimisation methods often struggle to handle nonli...Modern automated generation control(AGC)is increasingly complex,requiring precise frequency control for stability and operational accuracy.Traditional PID controller optimisation methods often struggle to handle nonlinearities and meet robustness requirements across diverse operational scenarios.This paper introduces an enhanced strategy using a multi-objective optimisation framework and a modified non-dominated sorting genetic algorithm Ⅱ(SNSGA).The proposed model optimises the PID controller by minimising key performance metrics:integration time squared error(ITSE),integration time absolute error(ITAE),and rate of change of deviation(J).This approach balances convergence rate,overshoot,and oscillation dynamics effectively.A fuzzy-based method is employed to select the most suitable solution from the Pareto set.The comparative analysis demonstrates that the SNSGA-based approach offers superior tuning capabilities over traditional NSGA-Ⅱ and other advanced control methods.In a two-area thermal power system without reheat,the SNSGA significantly reduces settling times for frequency deviations:2.94s for Δf_(1) and 4.98s for Δf_(2),marking improvements of 31.6%and 13.4%over NSGA-Ⅱ,respectively.展开更多
The spatial distribution of discontinuities and the size of rock blocks are the key indicators for rock mass quality evaluation and rockfall risk assessment.Traditional manual measurement is often dangerous or unreach...The spatial distribution of discontinuities and the size of rock blocks are the key indicators for rock mass quality evaluation and rockfall risk assessment.Traditional manual measurement is often dangerous or unreachable at some high-steep rock slopes.In contrast,unmanned aerial vehicle(UAV)photogrammetry is not limited by terrain conditions,and can efficiently collect high-precision three-dimensional(3D)point clouds of rock masses through all-round and multiangle photography for rock mass characterization.In this paper,a new method based on a 3D point cloud is proposed for discontinuity identification and refined rock block modeling.The method is based on four steps:(1)Establish a point cloud spatial topology,and calculate the point cloud normal vector and average point spacing based on several machine learning algorithms;(2)Extract discontinuities using the density-based spatial clustering of applications with noise(DBSCAN)algorithm and fit the discontinuity plane by combining principal component analysis(PCA)with the natural breaks(NB)method;(3)Propose a method of inserting points in the line segment to generate an embedded discontinuity point cloud;and(4)Adopt a Poisson reconstruction method for refined rock block modeling.The proposed method was applied to an outcrop of an ultrahigh steep rock slope and compared with the results of previous studies and manual surveys.The results show that the method can eliminate the influence of discontinuity undulations on the orientation measurement and describe the local concave-convex characteristics on the modeling of rock blocks.The calculation results are accurate and reliable,which can meet the practical requirements of engineering.展开更多
The Ocean 4A scatterometer, expected to be launched in 2024, is poised to be the world’s first spaceborne microwave scatterometer utilizing a digital beamforming system. To ensure high-precision measurements and perf...The Ocean 4A scatterometer, expected to be launched in 2024, is poised to be the world’s first spaceborne microwave scatterometer utilizing a digital beamforming system. To ensure high-precision measurements and performance sta-bility across diverse environments, stringent requirements are placed on the dynamic range of its receiving system. This paper provides a detailed exposition of a field-programmable gate array (FPGA)-based automatic gain control (AGC) design for the spaceborne scatterometer. Implemented on an FPGA, the algo-rithm harnesses its parallel processing capabilities and high-speed performance to monitor the received echo signals in real time. Employing an adaptive AGC algorithm, the system gene-rates gain control codes applicable to the intermediate fre-quency variable attenuator, enabling rapid and stable adjust-ment of signal amplitudes from the intermediate frequency amplifier to an optimal range. By adopting a purely digital pro-cessing approach, experimental results demonstrate that the AGC algorithm exhibits several advantages, including fast con-vergence, strong flexibility, high precision, and outstanding sta-bility. This innovative design lays a solid foundation for the high-precision measurements of the Ocean 4A scatterometer, with potential implications for the future of spaceborne microwave scatterometers.展开更多
Belt conveyors are prone to problems suchas conveyor belt deviation during operation.The main correction method is to adjust the angle of the roller frame,but the current adjustment is mostly manual.In order to solve ...Belt conveyors are prone to problems suchas conveyor belt deviation during operation.The main correction method is to adjust the angle of the roller frame,but the current adjustment is mostly manual.In order to solve the problem of low equipment transportation efficiency and low safety causedby conveyor belt deviation,a detection mechanism that can effectively detect conveyor belt deviation parameters is designed,and the working condition information is accurately transmitted to the PLC controller.If an abnormality is found,the designed correction device will correct the deviation,effectively ensuring the reliable and stable operation of the belt conveyor.展开更多
It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimens...It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.展开更多
文摘In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220 kV and a length of 250 km. These overhead power lines (L-213, L-214) connect the 220/110/35 kV “Songino” substation with the “Mandal” substation and form system networks. This paper presents the challenges encountered when implementing single-phase automatic reclosing (SPAR) devices and compares the changes in power system parameters before and after SPAR deployment for a long 220 kV line. Simulations and analyses were carried out using DIgSILENT PowerFactory software, focusing on rotor angle stability, and the overall impact on the power system during short-circuit faults. The evaluation also utilized measurement data from the Wide Area Monitoring System (WAMS) to compare system behavior pre- and post-implementation of SPAR. The findings reveal that SPAR significantly enhances system reliability and stability, effectively mitigating the risk of oscillations and stability loss triggered by short circuits. This improvement contributes to a more resilient power system, reducing the potential for disturbances caused by faults.
文摘Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive control(MPC),which utilizes an extensive mathe-matical model of the voltage regulation system to optimize the control actions over a defined prediction horizon.This predictive feature enables MPC to minimize voltage deviations while accounting for operational constraints,thereby improving stability and performance under dynamic conditions.Thefindings were compared with those derived from an optimal proportional integral derivative(PID)con-troller designed using the artificial bee colony(ABC)algorithm.Although the ABC-PID method adjusts the PID parameters based on historical data,it may be difficult to adapt to real-time changes in system dynamics under constraints.Comprehensive simulations assessed both frameworks,emphasizing performance metrics such as disturbance rejection,response to load changes,and resilience to uncertainties.The results show that both MPC and ABC-PID methods effectively achieved accurate voltage regulation;however,MPC excelled in controlling overshoot and settling time—recording 0.0%and 0.25 s,respectively.This demonstrates greater robustness compared to conventional control methods that optimize PID parameters based on performance criteria derived from actual system behavior,which exhibited settling times and overshoots exceeding 0.41 s and 5.0%,respectively.The controllers were implemented using MATLAB/Simulink software,indicating a significant advancement for power plant engineers pursuing state-of-the-art automatic voltage regulations.
文摘BACKGROUND A total of 100 patients diagnosed with mixed hemorrhoids from October 2022 to September 2023 in our hospital were randomly divided into groups by dice rolling and compared with the efficacy of different treatment options.AIM To analyze the clinical effect and prognosis of mixed hemorrhoids treated with polidocanol injection combined with automatic elastic thread ligation operation(RPH).METHODS A total of 100 patients with mixed hemorrhoids who visited our hospital from October 2022 to September 2023 were selected and randomly divided into the control group(n=50)and the treatment group(n=50)by rolling the dice.The procedure for prolapse and hemorrhoids(PPH)was adopted in the control group,while polidocanol foam injection+RPH was adopted in the treatment group.The therapeutic effects,operation time,wound healing time,hospital stay,pain situation(24 hours post-operative pain score,first defecation pain score),quality of life(QOL),incidence of complications(post-operative hemorrhage,edema,infection),incidence of anal stenosis 3 months post-operatively and recurrence rate 1 year post-operatively of the two groups were compared.RESULTS Compared with the control group,the total effective rate of treatment group was higher,and the difference was significant(P<0.05).The operation time/wound healing time/hospital stay in the treatment group were shorter than those in the control group(P<0.05).The pain scores at 24 hours after operation/first defecation pain score of the treatment group was significantly lower than those in the control group(P<0.05).After surgery,the QOL scores of the two groups decreased,with the treatment group having higher scores than that of the control group(P<0.05).Compared with the control group,the incidence of postoperative complications in the treatment group was lower,and the difference was significant(P<0.05);However,there was no significant difference in the incidence of postoperative bleeding between the two groups(P>0.05);There was no significant difference in the incidence of anal stenosis 3 months after operation and the recurrence rate 1 year after operation between the two groups(P>0.05).CONCLUSION For patients with mixed hemorrhoids,the therapeutic effect achieved by using polidocanol injection combined with RPH was better.The wounds of the patients healed faster,the postoperative pain was milder,QOL improved,and the incidence of complications was lower,and the short-term and long-term prognosis was good.
文摘BACKGROUND Depression is a leading global health concern with high suicide rates and recurrence.Cognitive models suggest that mental pain and automatic thoughts are central to depression's impact.The hypothesis is that self-compassion will be negatively associated with mental pain,mediated by automatic thoughts.AIM To determine the mediating role of automatic thoughts in the relationship between self-compassion and mental pain in individuals with depression.METHODS This cross-sectional study included 389 inpatients with depression from Tianjin Anding Hospital.Participants completed the Self-Compassion Scale-Chinese Version(SCS-C),Automatic Thought Questionnaire(ATQ),and Orbach&Mikulincer Mental Pain Scale-Chinese Version(OMMP).Data were analyzed using Pearson correlations,multiple linear regressions,and mediation analysis.RESULTS The SCS-C total score was 68.95±14.89,ATQ was 87.02±28.91,and OMMP was 129.01±36.74.Correlation analysis showed mental pain was positively associated with automatic thoughts(r=0.802,P<0.001)and negatively with selfcompassion(r=-0.636,P<0.001).Regression analysis indicated automatic thoughts(β=0.623,P<0.001)and self-compassion(β=-0.301,P<0.001)significantly predicted mental pain.Mediation analysis confirmed automatic thoughts partially mediated the relationship between self-compassion and mental pain(ab=-0.269,95%CI:-0.363 to-0.212).CONCLUSION Self-compassion is inversely related to mental pain in depression,with automatic thoughts playing a mediating role.These findings suggest potential therapeutic targets for alleviating mental pain in depressed patients.
文摘In this paper,the author follows the trail of C.Malabou,Q.Meillassoux,and G.Deleuze and tries to test three philosophical concepts that seem to be particularly threatened in the era of automatic digital reproduction.These three concepts are plasticity(defended for many years by C.Malabou),contingency(reconstructed by Q.Meillassoux),and virtuality(developed by G.Deleuze).The main task of the text will be to reflect on which of these three concepts better protects our thinking against automation and stays faithful to the ideal of creativity.In what sense are plasticity,contingency,and the possibility of virtualization the a priori condition of any transformation,physical or intellectual,affective or conceptual metamorphosis?In what sense are these three concepts the only conditions for the survival of every living being?Would a being without contingency,plasticity,and disposition to virtualization simply be a dead being?
基金supported in part by the Jiangsu Province Construction System Science and Technology Project(No.2024ZD056)the Research Development Fund of Xi’an Jiaotong-Liverpool University(No.RDF-24-01-097).
文摘Computer-vision and deep-learning techniques are widely applied to detect,monitor,and assess pavement conditions including road crack detection.Traditional methods fail to achieve satisfactory accuracy and generalization performance in for crack detection.Complex network model can generate redundant feature maps and computational complexity.Therefore,this paper proposes a novel model compression framework based on deep learning to detect road cracks,which can improve the detection efficiency and accuracy.A distillation loss function is proposed to compress the teacher model,followed by channel pruning.Meanwhile,a multi-dilation model is proposed to improve the accuracy of the model pruned.The proposed method is tested on the public database CrackForest dataset(CFD).The experimental results show that the proposed method is more efficient and accurate than other state-of-art methods.
基金Supported by Jiangsu Provincial Natural Science Foundation(Grant No.BK20231497)Jiangsu Provincial Post graduate Research&Practice Innovation Program(Grant No.KYCX25_2982)+3 种基金China University of Mining and Technology Graduate Innovation Program(Grant No.2025WLKXJ094)National Natural Science Foundation of China(Grant No.51975573)National Key R&D Program of China(Grant No.2022YFC2905600)Priority Academic Program Development of Jiangsu Higher Education Institute of China.
文摘A rotary sealing device that automatically compensates for wear is designed to address the issues of easy wear and the short service life of the rotary sealing device with automatic wear compensation in mining machinery.After the end face of the guide sleeve wears out,it still tightly adheres to the sealing valve seat under the pressure difference,achieving automatic wear compensation.Based on fluid-solid coupling technology,the structural strength of the rotary sealing device was checked.The influence of factors on the sealing performance of rotary sealing devices was studied using the control variable method.The results show that as the pressure of water increases,the leakage rate of the sealing device decreases,and after 30 MPa,the leakage rate is almost 0 mL/h.The temperature of the rotating sealing device increases with the increase of rotation speed or pressure,and the temperature is more affected by the rotation speed factor.The frictional torque increases with increasing pressure and is independent of rotational speed.Comprehensive analysis shows that the wear resistance and reliability level of the sealing guide sleeve material is PVDF>PEEK>PE>PA.This study designs a high-pressure automatic compensation wear rotary sealing device and selects the optimal sealing material,providing technical support for the application of high-pressure water jet in mining machinery.
基金supported by the Innovation Foundation of National Commercial Aircraft Manufacturing Engineering Technology Research Center(No.COMAC-SFGS-2022-1877)in part by the National Natural Science Foundation of China(No.92048301)。
文摘Cabin cables,as critical components of an aircraft's electrical system,significantly impact the operational efficiency and safety of the aircraft.The existing cable segmentation methods in civil aviation cabins are limited,especially in automation,heavily dependent on large amounts of data and resources,lacking the flexibility to adapt to different scenarios.To address these challenges,this paper introduces a novel image segmentation model,CableSAM,specifically designed for automated segmentation of cabin cables.CableSAM improves segmentation efficiency and accuracy using knowledge distillation and employs a context ensemble strategy.It accurately segments cables in various scenarios with minimal input prompts.Comparative experiments on three cable datasets demonstrate that CableSAM surpasses other advanced cable segmentation methods in performance.
基金Supported by Clinical Trials from the Nanjing Drum Tower Hospital,Affiliated Hospital of Medical School,Nanjing University,No.2021-LCYJ-MS-11Nanjing Drum Tower Hospital National Natural Science Foundation Youth Cultivation Project,No.2024-JCYJQP-15.
文摘Imaging evaluation of lymph node metastasis and infiltration faces problems such as low artificial outline efficiency and insufficient consistency.Deep learning technology based on convolutional neural networks has greatly improved the technical effect of radiomics in lymph node pathological characteristics analysis and efficacy monitoring through automatic lymph node detection,precise segmentation and three-dimensional reconstruction algorithms.This review focuses on the automatic lymph node segmentation model,treatment response prediction algorithm and benign and malignant differential diagnosis system for multimodal imaging,in order to provide a basis for further research on artificial intelligence to assist lymph node disease management and clinical decision-making,and provide a reference for promoting the construction of a system for accurate diagnosis,personalized treatment and prognostic evaluation of lymph node-related diseases.
基金supported by Chunhui Collaborative Research Project funded by the Ministry of Education of China[Grant No.202200490]Humanities and Social Sciences Research Project funded by the Ministry of Education of China[Grant No.23YJAZH139].
文摘With the development of machine translation technology,automatic pre-editing has attracted increasing research attention for its important role in improving translation quality and efficiency.This study utilizes UAM Corpus Tool 3.0 to annotate and categorize 99 key publications between 1992 and 2024,tracing the research paths and technological evolution of automatic pre-translation editing.The study finds that current approaches can be classified into four categories:controlled language-based approaches,text simplification approaches,interlingua-based approaches,and large language model-driven approaches.By critically examining their technical features and applicability in various contexts,this review aims to provide valuable insights to guide the future optimization and expansion of pre-translation editing systems.
基金Supported by Funding for Clinical Trials from the Nanjing Drum Tower Hospital,Affiliated Hospital of Medical School,Nanjing University,No.2021-LCYJ-MS-11.
文摘Esophageal cancer(EC),a common malignant tumor of the digestive tract,requires early diagnosis and timely treatment to improve patient prognosis.Automated detection of EC using medical imaging has the potential to increase screening efficiency and diagnostic accuracy,thereby significantly improving long-term survival rates and the quality of life of patients.Recent advances in deep learning(DL),particularly convolutional neural networks,have demons-trated remarkable performance in medical imaging analysis.These techniques have shown significant progress in the automated identification of malignant tumors,quantitative analysis of lesions,and improvement in diagnostic accuracy and efficiency.This article comprehensively examines the research progress of DL in medical imaging for EC,covering various imaging modalities such as digital pathology,endoscopy,computed tomography,etc.It explores the clinical value and application prospects of DL in EC screening and diagnosis.Additionally,the article addresses several critical challenges that must be overcome for the clinical translation of DL techniques,including constructing high-quality datasets,promoting multimodal feature fusion,and optimizing artificial intelligence-clinical workflow integration.By providing a detailed overview of the current state of DL in EC imaging and highlighting the key challenges and future directions,this article aims to guide future research and facilitate the clinical implementation of DL technologies in EC management,ultimately contributing to better patient outcomes.
基金supported by the National Natural Science Foundation of China(No.T2288101)the National Key Research and Development Project,China(No.2020YFC1512500)the Academic Excellence Foundation of Beijing University of Aeronautics and Astronautics(BUAA)。
文摘Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper proposes an Adaptive Terminal Sliding Combined Super TwistingControl(ATS-STC)method to address the issues of low precision,slow convergence,and poor dis-turbance rejection capability resulting from external disturbances,such as carrier air-wake and deckmotion.By introducing a nonlinear term into the sliding surface and employing an integralapproach,the proposed ATS-STC method can ensure finite-time convergence and mitigate the chat-tering problem.An adaptive law is also utilized to estimate the external disturbances,therebyenhancing the anti-disturbance performance.Then,the stability and convergence time analysis ofthe designed controller are conducted.Based on the proposed method,an Automatic Carrier Land-ing System(ACLS)is developed to perform the carrier landing control task.Furthermore,a multi-dimensional validation is carried out.For the numerical simulation test,the Terminal Sliding ModeControl(TSMC)method and Proportion Integration Differentiation(PID)method are introducedas comparison,the quantitative assessment results show that the tracking error of TSMC and PIDcan reach 1.5 times and 2 times that of the proposed method.Finally,the Hardware-in-the-Loop(HIL)test and real flight test are conducted.All the experimental results demonstrate that the pro-posed control method is more effective and precise.
基金the National Natural Science Foundation of China(No.61927822)。
文摘Traditional calibration method for the digital inclinometer relies on manual inspection,and results in its disadvantages of complicated process,low-efficiency and human errors easy to be introduced.To improve both the calibration accuracy and efficiency of digital inclinometer,an automatic digital inclinometer calibration system was developed in this study,and a new display tube recognition algorithm was proposed.First,a high-precision automatic turntable was taken as the reference to calculate the indication error of the inclinometer.Then,the automatic inclinometer calibration control process and the digital inclinometer zero-setting function were formulated.For display tube recognition,a new display tube recognition algorithm combining threading method and feature extraction method was proposed.Finally,the calibration system was calibrated by photoelectric autocollimator and regular polygon mirror,and the calibration system error and repeatability were calculated via a series of experiments.The experimental results showed that the indication error of the proposed calibration system was less than 4",and the repeatability was 3.9".A digital inclinometer with the resolution of 0.1°was taken as a testing example,within the calibration points'range of[-90°,90°],the repeatability of the testing was 0.085°,and the whole testing process was less than 90 s.The digital inclinometer indication error is mainly introduced by the digital inclinometer resolution according to the uncertainty evaluation.
基金supported by the National Key Research and Development Program of China(Grant No.2020YFB1313800)the National Science Foundation of China(Grant No.NSFC62373259)+1 种基金the Natural Science Foundation of Top Talent of SZTU(Grant No.GDRC202303)the Education Promotion Foundation of Guangdong Province(Grant No.2022ZDJS115).
文摘The success of robot-assisted pelvic fracture reduction surgery heavily relies on the accuracy of 3D/3D feature-based registration.This process involves extracting anatomical feature points from pre-operative 3D images which can be challenging because of the complex and variable structure of the pelvis.PointMLP_RegNet,a modified PointMLP,was introduced to address this issue.It retains the feature extraction module of PointMLP but replaces the classification layer with a regression layer to predict the coordinates of feature points instead of conducting regular classification.A flowchart for an automatic feature points extraction method was presented,and a series of experiments was conducted on a clinical pelvic dataset to confirm the accuracy and effectiveness of the method.PointMLP_RegNet extracted feature points more accurately,with 8 out of 10 points showing less than 4 mm errors and the remaining two less than 5 mm.Compared to PointNettt and PointNet,it exhibited higher accuracy,robustness and space efficiency.The proposed method will improve the accuracy of anatomical feature points extraction,enhance intra-operative registration precision and facilitate the widespread clinical application of robot-assisted pelvic fracture reduction.
基金Supported by National Natural Science Foundation of China(No.82074524)Harbin Medical University Graduate Research and Practice Innovation Project(No.YJSCX2023-50HYD).
文摘AIM:To develop different machine learning models to train and test diplopia images and data generated by the computerized diplopia test.METHODS:Diplopia images and data generated by computerized diplopia tests,along with patient medical records,were retrospectively collected from 3244 cases.Diagnostic models were constructed using logistic regression(LR),decision tree(DT),support vector machine(SVM),extreme gradient boosting(XGBoost),and deep learning(DL)algorithms.A total of 2757 diplopia images were randomly selected as training data,while the test dataset contained 487 diplopia images.The optimal diagnostic model was evaluated using test set accuracy,confusion matrix,and precision-recall curve(P-R curve).RESULTS:The test set accuracy of the LR,SVM,DT,XGBoost,DL(64 categories),and DL(6 binary classifications)algorithms was 0.762,0.811,0.818,0.812,0.858 and 0.858,respectively.The accuracy in the training set was 0.785,0.815,0.998,0.965,0.968,and 0.967,respectively.The weighted precision of LR,SVM,DT,XGBoost,DL(64 categories),and DL(6 binary classifications)algorithms was 0.74,0.77,0.83,0.80,0.85,and 0.85,respectively;weighted recall was 0.76,0.81,0.82,0.81,0.86,and 0.86,respectively;weighted F1 score was 0.74,0.79,0.82,0.80,0.85,and 0.85,respectively.CONCLUSION:In this study,the 7 machine learning algorithms all achieve automatic diagnosis of extraocular muscle palsy.The DL(64 categories)and DL(6 binary classifications)algorithms have a significant advantage over other machine learning algorithms regarding diagnostic accuracy on the test set,with a high level of consistency with clinical diagnoses made by physicians.Therefore,it can be used as a reference for diagnosis.
基金supported in part by the Science and Technology Innovation Program of Hunan Province under Grant 2022RC4028in part by the National Natural Science Foundation of China under Grant 62473204+3 种基金in part by the Chunhui Program Collaborative Scientific Research Project under Grant 202202004in part by the Natural Science Foundation of Nanjing University of Posts and Telecommunications under Grants NY221082,NY222144,and NY223075in part by the Huali Program for Excellent Talents in Nanjing University of Posts and Telecommunicationsin part by the Postgraduate Research and Practice Innovation Program of Jiangsu Province under Grant KYCX24_1215.
文摘Modern automated generation control(AGC)is increasingly complex,requiring precise frequency control for stability and operational accuracy.Traditional PID controller optimisation methods often struggle to handle nonlinearities and meet robustness requirements across diverse operational scenarios.This paper introduces an enhanced strategy using a multi-objective optimisation framework and a modified non-dominated sorting genetic algorithm Ⅱ(SNSGA).The proposed model optimises the PID controller by minimising key performance metrics:integration time squared error(ITSE),integration time absolute error(ITAE),and rate of change of deviation(J).This approach balances convergence rate,overshoot,and oscillation dynamics effectively.A fuzzy-based method is employed to select the most suitable solution from the Pareto set.The comparative analysis demonstrates that the SNSGA-based approach offers superior tuning capabilities over traditional NSGA-Ⅱ and other advanced control methods.In a two-area thermal power system without reheat,the SNSGA significantly reduces settling times for frequency deviations:2.94s for Δf_(1) and 4.98s for Δf_(2),marking improvements of 31.6%and 13.4%over NSGA-Ⅱ,respectively.
基金supported by the National Natural Science Foundation of China(Grant Nos.41941017 and 42177139)Graduate Innovation Fund of Jilin University(Grant No.2024CX099)。
文摘The spatial distribution of discontinuities and the size of rock blocks are the key indicators for rock mass quality evaluation and rockfall risk assessment.Traditional manual measurement is often dangerous or unreachable at some high-steep rock slopes.In contrast,unmanned aerial vehicle(UAV)photogrammetry is not limited by terrain conditions,and can efficiently collect high-precision three-dimensional(3D)point clouds of rock masses through all-round and multiangle photography for rock mass characterization.In this paper,a new method based on a 3D point cloud is proposed for discontinuity identification and refined rock block modeling.The method is based on four steps:(1)Establish a point cloud spatial topology,and calculate the point cloud normal vector and average point spacing based on several machine learning algorithms;(2)Extract discontinuities using the density-based spatial clustering of applications with noise(DBSCAN)algorithm and fit the discontinuity plane by combining principal component analysis(PCA)with the natural breaks(NB)method;(3)Propose a method of inserting points in the line segment to generate an embedded discontinuity point cloud;and(4)Adopt a Poisson reconstruction method for refined rock block modeling.The proposed method was applied to an outcrop of an ultrahigh steep rock slope and compared with the results of previous studies and manual surveys.The results show that the method can eliminate the influence of discontinuity undulations on the orientation measurement and describe the local concave-convex characteristics on the modeling of rock blocks.The calculation results are accurate and reliable,which can meet the practical requirements of engineering.
文摘The Ocean 4A scatterometer, expected to be launched in 2024, is poised to be the world’s first spaceborne microwave scatterometer utilizing a digital beamforming system. To ensure high-precision measurements and performance sta-bility across diverse environments, stringent requirements are placed on the dynamic range of its receiving system. This paper provides a detailed exposition of a field-programmable gate array (FPGA)-based automatic gain control (AGC) design for the spaceborne scatterometer. Implemented on an FPGA, the algo-rithm harnesses its parallel processing capabilities and high-speed performance to monitor the received echo signals in real time. Employing an adaptive AGC algorithm, the system gene-rates gain control codes applicable to the intermediate fre-quency variable attenuator, enabling rapid and stable adjust-ment of signal amplitudes from the intermediate frequency amplifier to an optimal range. By adopting a purely digital pro-cessing approach, experimental results demonstrate that the AGC algorithm exhibits several advantages, including fast con-vergence, strong flexibility, high precision, and outstanding sta-bility. This innovative design lays a solid foundation for the high-precision measurements of the Ocean 4A scatterometer, with potential implications for the future of spaceborne microwave scatterometers.
基金Yingkou Institute of Technology school-level scientificresearch project(Grant:ZDIL202302).
文摘Belt conveyors are prone to problems suchas conveyor belt deviation during operation.The main correction method is to adjust the angle of the roller frame,but the current adjustment is mostly manual.In order to solve the problem of low equipment transportation efficiency and low safety causedby conveyor belt deviation,a detection mechanism that can effectively detect conveyor belt deviation parameters is designed,and the working condition information is accurately transmitted to the PLC controller.If an abnormality is found,the designed correction device will correct the deviation,effectively ensuring the reliable and stable operation of the belt conveyor.
基金supported by grants from the Human Resources Development program (Grant No.20204010600250)the Training Program of CCUS for the Green Growth (Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government (MOTIE).
文摘It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.
