Interaction of polymer-containing injected fluids with shale is a widely studied phenomenon, but much is still unknown about the interaction of charged polyacrylamides such as anionic and cationic polyacrylamides with...Interaction of polymer-containing injected fluids with shale is a widely studied phenomenon, but much is still unknown about the interaction of charged polyacrylamides such as anionic and cationic polyacrylamides with shale. The nature of interaction of charged polyacrylamides with shale is not well understood, especially from the perspective of assessing the potential for polyacrylamides to cause formation damage. Zeta potential and rheological measurements were made for Chattanooga and Pride Mountain shales suspended in polyacrylamide solutions with and without inorganic salts and tetramethyl ammonium chloride（TMAC）. The change in zeta potential and viscosity with time was recorded. The magnitude of decrease in the absolute value of zeta potential with time is indicative of adsorption of polymer on the surface of shale and serves as a measure of the extent of polymer interaction with shale. The salts that were used in this study are potassium chloride（KCl）, sodium chloride（Na Cl）. This study quantified the interaction of anionic and cationic polyacrylamide with different North American shales.From the experimental results, it was determined that the polyacrylamides can interact strongly with shale, particularly the cationic polyacrylamide. The objective of this study was to determine the extent of interaction of anionic and cationic polyacrylamide with each shale sample in the presence of additives such as salts.展开更多
Selective flocculation is a new method to solve the problem of China's bauxite de-silication besides flotation and reverse flotation. The method of selective flocculation of bauxite using hydrolyzed polyacrylamide...Selective flocculation is a new method to solve the problem of China's bauxite de-silication besides flotation and reverse flotation. The method of selective flocculation of bauxite using hydrolyzed polyacrylamide as flocculant was experimented and evaluated. The results of diaspore and kaolinite single mineral settling tests show that the difference between settlement yield of kaolinite(settling 15 min) and diaspore(settling 3 min) increases from 16% to 60% by adding flocculant at pH=7. Results of selective flocculation experiment of bauxite show that the higher concentrate grade(65.75) and Al-Si ratio(7.34) could be obtained with sodium carbonate as dispersant compared with sodium hexametaphosphate; under the action of flocculating agent, the concentrate grade and Al-Si ratio increase to 67.99 and 9.01. These results could meet the requirements of Bayer production, and the simpler process was expected to cost far less than traditional flotation method and a promising de-silication method of bauxite.展开更多
The polyacrylamide which is directly added into concrete shows strong water absorption property.Thus the construction of underwater constructure would demand high amount of water,resulting in poor workability of concr...The polyacrylamide which is directly added into concrete shows strong water absorption property.Thus the construction of underwater constructure would demand high amount of water,resulting in poor workability of concrete and strength shrinkage after hardening.Herein,a kind of anionic polyacrylamide(APAM)grafted with water reducing functional group(-COOH)was synthesized at low temperatures by partial factor design and response surface design.The structure and morphology of APAM were characterized by UV,FTIR and SEM methods.The experimental results show that the molecular weight of the synthesized APAM could reach 11 million,under the condition that the temperature was 35℃,the pH value was 8,the monomer concentration was 27wt%,the initiator dosage was 0.6wt%,and the monomer ratio(n(AM):n(AA))was 3.When the APAM was applied into the underwater slurry,it presented good flocculation and low water demand.When the dosage was 1%of the mass of the cement,the water demand increased by 12%,which could meet the self-leveling and anti-dispersity of the underwater slurry at the same time.This technology provides technical guidance for the large-scale industrial production of polyacrylamide for underwater concrete construction while achieving environmental protection during production.展开更多
文摘Interaction of polymer-containing injected fluids with shale is a widely studied phenomenon, but much is still unknown about the interaction of charged polyacrylamides such as anionic and cationic polyacrylamides with shale. The nature of interaction of charged polyacrylamides with shale is not well understood, especially from the perspective of assessing the potential for polyacrylamides to cause formation damage. Zeta potential and rheological measurements were made for Chattanooga and Pride Mountain shales suspended in polyacrylamide solutions with and without inorganic salts and tetramethyl ammonium chloride（TMAC）. The change in zeta potential and viscosity with time was recorded. The magnitude of decrease in the absolute value of zeta potential with time is indicative of adsorption of polymer on the surface of shale and serves as a measure of the extent of polymer interaction with shale. The salts that were used in this study are potassium chloride（KCl）, sodium chloride（Na Cl）. This study quantified the interaction of anionic and cationic polyacrylamide with different North American shales.From the experimental results, it was determined that the polyacrylamides can interact strongly with shale, particularly the cationic polyacrylamide. The objective of this study was to determine the extent of interaction of anionic and cationic polyacrylamide with each shale sample in the presence of additives such as salts.
基金Project(2005CB623701)supported by the National Key Basic Research Program(973)of China
文摘Selective flocculation is a new method to solve the problem of China's bauxite de-silication besides flotation and reverse flotation. The method of selective flocculation of bauxite using hydrolyzed polyacrylamide as flocculant was experimented and evaluated. The results of diaspore and kaolinite single mineral settling tests show that the difference between settlement yield of kaolinite(settling 15 min) and diaspore(settling 3 min) increases from 16% to 60% by adding flocculant at pH=7. Results of selective flocculation experiment of bauxite show that the higher concentrate grade(65.75) and Al-Si ratio(7.34) could be obtained with sodium carbonate as dispersant compared with sodium hexametaphosphate; under the action of flocculating agent, the concentrate grade and Al-Si ratio increase to 67.99 and 9.01. These results could meet the requirements of Bayer production, and the simpler process was expected to cost far less than traditional flotation method and a promising de-silication method of bauxite.
基金Funded by the National Natural Science Foundation of China(No.51778378)the Natural Science Foundation of Hebei Province(No.E2022210103)。
文摘The polyacrylamide which is directly added into concrete shows strong water absorption property.Thus the construction of underwater constructure would demand high amount of water,resulting in poor workability of concrete and strength shrinkage after hardening.Herein,a kind of anionic polyacrylamide(APAM)grafted with water reducing functional group(-COOH)was synthesized at low temperatures by partial factor design and response surface design.The structure and morphology of APAM were characterized by UV,FTIR and SEM methods.The experimental results show that the molecular weight of the synthesized APAM could reach 11 million,under the condition that the temperature was 35℃,the pH value was 8,the monomer concentration was 27wt%,the initiator dosage was 0.6wt%,and the monomer ratio(n(AM):n(AA))was 3.When the APAM was applied into the underwater slurry,it presented good flocculation and low water demand.When the dosage was 1%of the mass of the cement,the water demand increased by 12%,which could meet the self-leveling and anti-dispersity of the underwater slurry at the same time.This technology provides technical guidance for the large-scale industrial production of polyacrylamide for underwater concrete construction while achieving environmental protection during production.
