The ring-opening alternating copolymerization(ROAC)of 3,4-dihydrocoumarin(DHC)/epoxides has been successfully developed using an imidazolium salt of 1-ethyl-3-methylimidazolium chloride(EMIMCl)as a catalyst.The result...The ring-opening alternating copolymerization(ROAC)of 3,4-dihydrocoumarin(DHC)/epoxides has been successfully developed using an imidazolium salt of 1-ethyl-3-methylimidazolium chloride(EMIMCl)as a catalyst.The resulting copolymer has a molecular weight of 13.7kg·mol^(-1),a narrow molecular weight distribution of 1.03 and a strictly alternating structure.The MALDI-TOF MS characterization and DFT calculations including electrostatic potential(ESP),hydrogen-atom abstraction(HAA),independent gradient model based on hirshfeld partition(IGMH)and atoms-in-molecules(AIM)analysis were used to investigate the metal-free catalytic process.The synergistic effect of anions and cations of EMIMCl for ROAC of DHC and epoxides was demonstrated.This study provides a metal-free catalytic system for the facile synthesis of alternating polyesters from DHC.展开更多
Prefabricated twinning represents an effective strategy for optimizing the microstructure of extruded forming components and facilitating changes in texture.The study examines the incorporation of[10-12]twins into an ...Prefabricated twinning represents an effective strategy for optimizing the microstructure of extruded forming components and facilitating changes in texture.The study examines the incorporation of[10-12]twins into an AZ31 magnesium alloy billet via cold pre-upsetting deformation before alternating forward extrusion(CUAFE).The experimental results indicate that the initial presence of[10-12]twins is advantageous for the development of[10-10]and[11-20]texture components during the extrusion process.In addition,different DRX mechanisms have different influences on the evolution of basal texture.The CDRX grains tend to preferentially select the[11-20]texture orientation,weakening the[10-10]texture and enhancing the[11-20]texture.However,most DDRX grains deviate significantly from the orientation of their surrounding original grain and do not have a preferred orientation.This is reflected in the mechanical properties of the CUAFE part.The tensile strength is 323.5 MPa,while the elongation is as high as 20.1%.展开更多
The results of the study of the effect of partial substitution of Fe by Mn in the La Fe_(11.2-x)Mn_(x)Co_(0.7)Si_(1.1)system on magnetization,specific heat,magnetostriction and magnetocaloric effect are presented.Dire...The results of the study of the effect of partial substitution of Fe by Mn in the La Fe_(11.2-x)Mn_(x)Co_(0.7)Si_(1.1)system on magnetization,specific heat,magnetostriction and magnetocaloric effect are presented.Direct measurements of the adiabatic temperature change(ΔT_(ad))were carried out in alternating magnetic fields(AMF)using the magnetic field modulation method.Partial substitution of Fe atoms by Mn atoms leads to a shift in the Curie temperature(T_(C))towards lower temperatures without a noticeable deterioration in magnetic properties.A correlation was found between the structural component of the magnetocaloric effect and the stability of the frequency of theΔT_(ad)in the AMFs—an increase in the manganese concentration leads to a decrease in magnetostriction and to a lower dependence ofΔT_(ad)on the frequency of the magnetic field.Estimates of the specific cooling power Q_(C)as a function of the frequency of the AMF showed that the highest value of Q_(C)at f=20 Hz in a magnetic field of 12k Oe is 26.3 W g^(-1)and is observed for the composition with x=0.1.This value is higher than that of Gd,for which,under the same conditions,Q_(C)=21.6 W g^(-1).All the samples studied show stability of the value ofΔT_(ad)without any sign of deterioration of the effect up to 60,000cycles of switching on/off of the magnetic field of 12 k Oe.The discovered frequency and cyclic stability ofΔT_(ad)of the studied samples increase their prospects for application in magnetic cooling technology.展开更多
With the continuous advancement of electronic devices,flexible thin films with both thermal manage-ment functions and excellent electromagnetic interference(EMI)shielding properties have received much attention.Hence,...With the continuous advancement of electronic devices,flexible thin films with both thermal manage-ment functions and excellent electromagnetic interference(EMI)shielding properties have received much attention.Hence,inspired by Janus,a CNF/MXene/ZnFe2O4@PANI composite film with an asymmetric gradient alternating structure was successfully prepared by adjusting the filler content of the conduc-tive and magnetic layers using a vacuum-assisted filtration method.Benefiting from the magnetic reso-nance and hysteresis loss of ZnFe2O4@PANI,conductive loss and dipole polarization of MXene,as well as the exclusive"absorption-reflection-reabsorption"shielding feature in the alternating multilayered films,CM&CZFP-4 G film has superior EMI shielding performance,with an EMI SE of up to 45.75 dB and shield-ing effectiveness of 99.99%.Surprisingly,the composite film maintains reliable EMI shielding properties even after prolonged erosion in harsh environments such as high/low temperatures,high humidity,acids and alkalis.Furthermore,the CM&CZFP-4 G responded quickly within about 50 s and reached a maximum steady-state temperature of 235.8℃ at an applied voltage of 9.0 V,indicating the obtained film acquired outstanding and controllable Joule heating performance.This result was attributed to the homogeneous dispersion of MXene to build up a conductive network and endow the CNF/MXene with high conduc-tivity.Meanwhile,the fire resistance of CM&CZFP-4 G was significantly improved compared to pure CNF,which guaranteed fire safety during its application.Additionally,contributed by long fiber entanglement of CNF,extensive hydrogen-bonding interactions and multilayer structural design,the CM&CZFP-4 G film exhibits excellent mechanical characteristics,with the tensile strength and fracture strain of 27.74 MPa and 6.21%,separately.This work offers a creative avenue to prepare multifunctional composite films with electromagnetic shielding and Joule heating for various application environments.展开更多
BACKGROUND Working memory serves as a fundamental cognitive function that substantially impacts performance in various cognitive tasks.Extensive neurophysiological research has established that theta oscillations(4-8 ...BACKGROUND Working memory serves as a fundamental cognitive function that substantially impacts performance in various cognitive tasks.Extensive neurophysiological research has established that theta oscillations(4-8 Hz)play an essential role in supporting working memory operations.Theta-band transcranial alternating current stimulation(tACS)offers a potential mechanism for working memory enhancement through direct modulation of these fundamental neural oscillations.Nevertheless,current empirical evidence shows substantial variability in the observed effects of theta-tACS across studies.AIM To conduct a systematic review and meta-analysis evaluating the effects of thetatACS on working memory performance in healthy adults.METHODS A systematic literature search was performed on PubMed,EMBASE,and Web of Science up to March 10,2025.Effect sizes were computed using Hedges’g with 95%confidence intervals(CIs),with separate meta-analyses for all included studies and for distinct working memory paradigms[n-back and delayed matchto-sample(DMTS)tasks]to examine potential task-specific effects.Subgroup analyses and meta-regression were performed to evaluate the influence of key moderating variables.RESULTS The systematic review included 21 studies(67 effect sizes).Initial meta-analysis showed theta-tACS moderately improved working memory(Hedges’g=0.405,95%CI:0.212-0.598).However,this effect became nonsignificant after correcting for publication bias(trim-and-fill adjusted Hedges’g=0.082,95%CI:-0.052 to 0.217).Task-specific analyses revealed significant benefits in n-back tasks(Hedges’g=0.463,95%CI:0.193-0.733)but not in DMTS tasks(Hedges’g=0.257,95%CI:-0.186 to 0.553).Moderator analyses showed that performance in n-back tasks was influenced by stimulation frequency(P=0.001),concurrent status(P=0.014),task modality(P=0.005),and duration(P=0.013),whereas only the region of targeted stimulation(P=0.012)moderated DMTS tasks.CONCLUSION Theta-tACS enhances working memory in healthy adults,with effects modulated by the task type and protocol parameters,offering dual implications for cognitive enhancement and clinical interventions.展开更多
The application of multi-material topology optimization affords greater design flexibility compared to traditional single-material methods.However,density-based topology optimization methods encounter three unique cha...The application of multi-material topology optimization affords greater design flexibility compared to traditional single-material methods.However,density-based topology optimization methods encounter three unique challenges when inertial loads become dominant:non-monotonous behavior of the objective function,possible unconstrained characterization of the optimal solution,and parasitic effects.Herein,an improved Guide-Weight approach is introduced,which effectively addresses the structural topology optimization problem when subjected to inertial loads.Smooth and fast convergence of the compliance is achieved by the approach,while also maintaining the effectiveness of the volume constraints.The rational approximation of material properties model and smooth design are utilized to guarantee clear boundaries of the final structure,facilitating its seamless integration into manufacturing processes.The framework provided by the alternating active-phase algorithm is employed to decompose the multi-material topological problem under inertial loading into a set of sub-problems.The optimization of multi-material under inertial loads is accomplished through the effective resolution of these sub-problems using the improved Guide-Weight method.The effectiveness of the proposed approach is demonstrated through numerical examples involving two-phase and multi-phase materials.展开更多
An alternating magnetic field(AMF)was introduced into the narrow gap laser-arc hybrid welding process for 2205 duplex stainless steel thick plates.The corrosion performance of the welded joints was evaluated through e...An alternating magnetic field(AMF)was introduced into the narrow gap laser-arc hybrid welding process for 2205 duplex stainless steel thick plates.The corrosion performance of the welded joints was evaluated through electrochemical studies.The results revealed that joints welded with the application of AMF had a lower corrosion current density compared to those welded without an external AMF.Additionally,these joints showed higher pitting potential and polarization resistance.Microscopic electrochemical analysis indicated that joints subjected to AMF exhibited minimal cathodic current in simulated seawater,with only slight fluctuations in the anodic current peak.Overall,the corrosion levels on the joint surfaces were relatively low.After 4 h of immersion in the corrosive medium,the average impedance of joints exposed to AMF increased by 60.7%compared to those not influenced by a magnetic field.These findings suggest that applying AMF during the narrow gap laser-arc hybrid welding process can significantly improve the corrosion resistance of duplex stainless steel welded joints,reducing their susceptibility to stress corrosion in seawater-like environments.展开更多
The Global Position System(GPS)is a reliable method for positioning in most scenarios,but it falls short in harsh environments like urban vehicular scenarios,where numerous trees or flyovers obstruct the signals.This ...The Global Position System(GPS)is a reliable method for positioning in most scenarios,but it falls short in harsh environments like urban vehicular scenarios,where numerous trees or flyovers obstruct the signals.This presents an unprecedented challenge for autonomous vehicles or applications requiring high accuracy.Fortunately,vehicular ad-hoc networks(VANET)offer an effective solution,where vehicle-to-vehicle(V2V)and vehicle-to-infrastructure(V2I)communications are used to enhance location awareness.In V2I communications,the roadside units(RSU)transmit beacon packets,and the vehicle receives numerous packets from different RSUs to establish communication.To further improve localization accuracy,a cross-covariance matrices-alternating least square(CCM-ALS)algorithm is proposed.The algorithm relies on ALS of the CCM for obtaining the position of vehicles in V2I communications.The algorithm is highly precise compared to traditional angle of arrival(AOA)positioning and not inferior to direct position determination(DPD)approaches while being low in complexity,which is crucial for moving vehicles.The numerical results verify the superiority of the proposed method.展开更多
The quantum alternating operator ansatz algorithm(QAOA+)is widely used for constrained combinatorial optimization problems(CCOPs)due to its ability to construct feasible solution spaces.In this paper,we propose a prog...The quantum alternating operator ansatz algorithm(QAOA+)is widely used for constrained combinatorial optimization problems(CCOPs)due to its ability to construct feasible solution spaces.In this paper,we propose a progressive quantum algorithm(PQA)to reduce qubit requirements for QAOA+in solving the maximum independent set(MIS)problem.PQA iteratively constructs a subgraph likely to include the MIS solution of the original graph and solves the problem on it to approximate the global solution.Specifically,PQA starts with a small-scale subgraph and progressively expands its graph size utilizing heuristic expansion strategies.After each expansion,PQA solves the MIS problem on the newly generated subgraph using QAOA+.In each run,PQA repeats the expansion and solving process until a predefined stopping condition is reached.Simulation results show that PQA achieves an approximation ratio of 0.95 using only 5.57%(2.17%)of the qubits and 17.59%(6.43%)of the runtime compared with directly solving the original problem with QAOA+on Erd?s-Rényi(3-regular)graphs,highlighting the efficiency and scalability of PQA.展开更多
A novel algorithm, i.e. the fast alternating direction method of multipliers （ADMM）, is applied to solve the classical total-variation （ TV ）-based model for image reconstruction. First, the TV-based model is refo...A novel algorithm, i.e. the fast alternating direction method of multipliers （ADMM）, is applied to solve the classical total-variation （ TV ）-based model for image reconstruction. First, the TV-based model is reformulated as a linear equality constrained problem where the objective function is separable. Then, by introducing the augmented Lagrangian function, the two variables are alternatively minimized by the Gauss-Seidel idea. Finally, the dual variable is updated. Because the approach makes full use of the special structure of the problem and decomposes the original problem into several low-dimensional sub-problems, the per iteration computational complexity of the approach is dominated by two fast Fourier transforms. Elementary experimental results indicate that the proposed approach is more stable and efficient compared with some state-of-the-art algorithms.展开更多
For Oppenheim series epansions, the authors of [7] discussed the exceptional sets Bm={x∈（0,1]：1〈dj（x）/h（j-1）（d（j-1）（x））≤m for any j ≥2} In this paper, we investigate the Hausdorff dimension of a kind o...For Oppenheim series epansions, the authors of [7] discussed the exceptional sets Bm={x∈（0,1]：1〈dj（x）/h（j-1）（d（j-1）（x））≤m for any j ≥2} In this paper, we investigate the Hausdorff dimension of a kind of exceptional sets occurring in alternating Oppenheim series expansion. As an application, we get the exact Hausdorff dimension of the-set in Luroth series expansion, also we give an estimate of such dimensional number.展开更多
The effects of alternating magnetic field on the corrosion morphologies, corrosion rate, and corrosion products of copper in 3.5% NaCl solution, sea water, and magnetized sea water were investigated using electrochemi...The effects of alternating magnetic field on the corrosion morphologies, corrosion rate, and corrosion products of copper in 3.5% NaCl solution, sea water, and magnetized sea water were investigated using electrochemical test, scanning electron microscopy/energy dispersive analysis system of X-ray （SEM/EDAX）, and X-ray diffraction （XRD）. The results show that the corrosion rate of copper in magnetized sea water is minimal. Moreover, the surface of the specimen in magnetized sea water is uniform and compact as compared with those in 3.5% NaCl solution and sea water. The corrosion products of copper in magnetized sea water are mainly Cu2O and CuCl2. However, the corrosion products in sea water are CuCl, Cu2Cl（OH）3, and FeCl3-6H2O. The electrochemical corrosion mechanisms of copper in the three media were also discussed.展开更多
For decades visual field defects were considered irreversible because it was thought that in the visual system the regeneration potential of the neuronal tissues is low.Nevertheless,there is always some potential for ...For decades visual field defects were considered irreversible because it was thought that in the visual system the regeneration potential of the neuronal tissues is low.Nevertheless,there is always some potential for partial recovery of the visual field defect that can be achieved through induction of neuroplasticity.Neuroplasticity refers to the ability of the brain to change its own functional architecture by modulating synaptic efficacy.It is maintained throughout life and just as neurological rehabilitation can improve motor coordination,visual field defects in glaucoma,diabetic retinopathy or optic neuropathy can be improved by inducing neuroplasticity.In ophthalmology many new treatment paradigms have been tested that can induce neuroplastic changes,including non-invasive alternating current stimulation.Treatment with alternating current stimulation(e.g.,30 minutes,daily for 10 days using transorbital electrodes and^10 Hz)activates the entire retina and parts of the brain.Electroencephalography and functional magnetic resonance imaging studies revealed local activation of the visual cortex,global reorganization of functional brain networks,and enhanced blood flow,which together activate neurons and their networks.The future of low vision is optimistic because vision loss is indeed,partially reversible.展开更多
The stresses around bubbles formed on a coating/substrate interface under hydrostatic pressure(HP)and alternating hydrostatic pressure(AHP)were calculated using the finite element method.The results reveal that HP pro...The stresses around bubbles formed on a coating/substrate interface under hydrostatic pressure(HP)and alternating hydrostatic pressure(AHP)were calculated using the finite element method.The results reveal that HP promotes coating failure but does not mechanically destroy the interface,whereas AHP can provide tensile stress on bubbles formed at the interface and accelerate disbonding of the coating.Because of water resistance,a lag time exists for the coating that serves in an AHP environment.The coating can have a better protective performance if the lag time suits the AHP to minimize the impact of the AHP on the interface.展开更多
Accumulative alternating back extrusion was a potential fine-grain modification method.In this paper,it was an innovative attempt to develop high-performance magnesium alloy sheet by this process.Under the condition o...Accumulative alternating back extrusion was a potential fine-grain modification method.In this paper,it was an innovative attempt to develop high-performance magnesium alloy sheet by this process.Under the condition of 350 K,commercial AZ31 magnesium alloy was made into billet by accumulative alternating back extrusion,and then extruded into fine-grain magnesium alloy sheet.Through a systematic study of its microstructure and mechanical properties,the results showed that the initial state had an important influence on the evolution of the structure during extrusion.After accumulative alternating back extrusion to produce the billet,the grain size of the sheet obtained by extrusion was significantly refined,which was related to the accumulation of deformation and grain refinement during the alternating loading process.Grain refinement caused the proportion of dynamic recrystallization inside the sheet with 2 cycles of accumulative alternating back extrusion to drop to 27%.With the increase of extrusion cycles from 2 to 4,the high density of dislocations led to an increase in the proportion of dynamic recrystallization and finer grains.The texture changed from strong basal texture to weak bimodal texture.The results of uniaxial tensile test show that due to grain refinement and texture change,the yield strength was significantly reduced,and the plasticity was significantly improved.It was verified that accumulative alternating back extrusion was meaningful for subsequent processing,and it also provided scientific guidance for the development of fine-grained magnesium alloy sheet.展开更多
With rapid economic development in China, demand for energy and transportation is growing. Due to the limitations of factors such as terrain and traffic, a large number of buried oil and gas pipelines are parallel to ...With rapid economic development in China, demand for energy and transportation is growing. Due to the limitations of factors such as terrain and traffic, a large number of buried oil and gas pipelines are parallel to high- voltage transmission lines and electrified railways over long distances. Alternating pipelines is very serious in laboratory experiments were current （AC） corrosion of such cases. In this work, carried out with an electrochemical method in a simulated soil solution at various AC current densities from 0 to 200 A]m2 and AC frequencies from 10 to 200 Hz. Experimental results indicated that with an increase in the AC current density, the corrosion po- tential of an X60 steel electrode shifted negatively, the anodic current density increased significantly, and the corrosion rate increased. Moreover, with an increase in the AC frequency, the corrosion potential of the X60 electrode shifted positively and the anodic current density decreased, which led to a decrease in the corrosion rate. Furthermore, the morphology of X60 electrodes indicated that uniform corrosion occurred at a low AC current density; while corrosion pits were found on the X60 electrode surface at a high AC current density, and deep corrosion pits seriously damaged the pipelines and might lead to leakage.展开更多
Direct seeded rice is promising alternative to traditional transplanting, but requires appropriate crop and water management to maintain yield performance and achieve high water productivity. Present study evaluated t...Direct seeded rice is promising alternative to traditional transplanting, but requires appropriate crop and water management to maintain yield performance and achieve high water productivity. Present study evaluated the effect of seed priming and irrigation on crop establishment, tillering, agronomic traits, paddy yield, grain quality and water productivity of direct seeded rice in alternate wetting and drying （DSR-AWD） in comparison with direct seeded rice at field capacity （DSR- FC）. Seed priming treatments were osmo-priming with KCI （2.2%）, CaCI2 （2.2%） and moringa leaf extracts （MLE, 3.3%） including hydro-priming as control. Among the treatments, seed osmo-primed with MLE emerged earlier and had higher final emergence, followed by osmo-priming with CaCI2. Tillering emergence rate and number of tillers per plant were the highest for seed priming with CaCI2 in DSR- AWD. Total productive and non-productive tillers, panicle length, biological and grain yields, harvest index were highest for seed priming with MLE or CaCI2 in DSR-AWD. Similarly, grain quality, estimated in terms of normal grains, abortive and chalky grains, was also the highest in DSR-AWD with MLE osmo-priming. Benefit cost ratio and water productivity was also the highest in DSR-AWD for seed priming with MLE. In conclusion, seed priming with MLE or CaCI2 can be successfully employed to improve the direct seeded rice performance when practiced with alternate wetting and drying irrigation.展开更多
The nonlinear combined resonance problem of a ferromagnetic circular plate in a transverse alternating magnetic field is investigated. On the basis of the deformation potential energy, the strain potential energy, and...The nonlinear combined resonance problem of a ferromagnetic circular plate in a transverse alternating magnetic field is investigated. On the basis of the deformation potential energy, the strain potential energy, and the kinetic energy of the circular plate, the Hamilton principle is used to induce the magnetoelastic coupling transverse vibration dynamical equation of the ferromagnetic circular plate. Based on the basic electromagnetic theory, the expressions of the magnet force and the Lorenz force of the circular plate are presented. A displacement function satisfying clamped-edge combined with the Galerkin method is used to derive the Duffing vibration differential equation of the circular plate. The amplitude-frequency response equations of the system under various combined resonance forms are obtained by means of the multi-scale method, and the stability of the steady-state solutions is analyzed according to the Lyapunov theory. Through examples, the amplitude-frequency characteristic curves with different parameters, the amplitude of resonance varying with magnetic field intensity and excitation force, and the time-course response diagram, phase diagram, Poincar′e diagram of the system vibration are plotted, respectively. The effects of different parameters on the amplitude and stability of the system are discussed. The results show that the electromagnetic parameters have a significant effect on the multi-valued attribute and stability of the resonance solutions, and the system may exhibit complex nonlinear dynamical behavior including multi-period and quasi-periodic motion.展开更多
Linear scan computed tomography （LCT） is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in prac...Linear scan computed tomography （LCT） is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in practical applications of LCT, there are challenges to image reconstruction due to limited-angle and insufficient data. In this paper, a new reconstruction algorithm based on total-variation （TV） minimization is developed to reconstruct images from limited-angle and insufficient data in LCT. The main idea of our approach is to reformulate a TV problem as a linear equality constrained problem where the objective function is separable, and then minimize its augmented Lagrangian function by using alternating direction method （ADM） to solve subproblems. The proposed method is robust and efficient in the task of reconstruction by showing the convergence of ADM. The numerical simulations and real data reconstructions show that the proposed reconstruction method brings reasonable performance and outperforms some previous ones when applied to an LCT imaging problem.展开更多
To develop technically feasible and economically favorable dynamic process control(DPC)strategies for an alternating activated sludge(AAS)system,a bench-scale continuous-flow alternating aerobic and anoxic reactor,per...To develop technically feasible and economically favorable dynamic process control(DPC)strategies for an alternating activated sludge(AAS)system,a bench-scale continuous-flow alternating aerobic and anoxic reactor,performing short-cut nitrogen removal from real domestic wastewater was operated under different control strategies for more than five months.A fixed-time control(FTC) study showed that bending-points on pH and oxidation-reduction potential(ORP)profiles accurately coincided with the major biologic...展开更多
基金financially supported by the National Natural Science Foundation of China(No.22161040)Natural Science Foundation of Gansu(No.24JRRA125)Science Research Project of Northwest Normal University(No.NWNU-LKZD2021-3)。
文摘The ring-opening alternating copolymerization(ROAC)of 3,4-dihydrocoumarin(DHC)/epoxides has been successfully developed using an imidazolium salt of 1-ethyl-3-methylimidazolium chloride(EMIMCl)as a catalyst.The resulting copolymer has a molecular weight of 13.7kg·mol^(-1),a narrow molecular weight distribution of 1.03 and a strictly alternating structure.The MALDI-TOF MS characterization and DFT calculations including electrostatic potential(ESP),hydrogen-atom abstraction(HAA),independent gradient model based on hirshfeld partition(IGMH)and atoms-in-molecules(AIM)analysis were used to investigate the metal-free catalytic process.The synergistic effect of anions and cations of EMIMCl for ROAC of DHC and epoxides was demonstrated.This study provides a metal-free catalytic system for the facile synthesis of alternating polyesters from DHC.
基金supported by the National Natural Science Foundation of China(No.52475341).
文摘Prefabricated twinning represents an effective strategy for optimizing the microstructure of extruded forming components and facilitating changes in texture.The study examines the incorporation of[10-12]twins into an AZ31 magnesium alloy billet via cold pre-upsetting deformation before alternating forward extrusion(CUAFE).The experimental results indicate that the initial presence of[10-12]twins is advantageous for the development of[10-10]and[11-20]texture components during the extrusion process.In addition,different DRX mechanisms have different influences on the evolution of basal texture.The CDRX grains tend to preferentially select the[11-20]texture orientation,weakening the[10-10]texture and enhancing the[11-20]texture.However,most DDRX grains deviate significantly from the orientation of their surrounding original grain and do not have a preferred orientation.This is reflected in the mechanical properties of the CUAFE part.The tensile strength is 323.5 MPa,while the elongation is as high as 20.1%.
基金financially supported by Russian Science Foundation(No.24-43-00156,https://rscf.ru/en/project/24-43-00156/)the National Natural Science Foundation of China(No.52171169)the State Key Laboratory for Advanced Metals and Materials(No.2023-ZD01)。
文摘The results of the study of the effect of partial substitution of Fe by Mn in the La Fe_(11.2-x)Mn_(x)Co_(0.7)Si_(1.1)system on magnetization,specific heat,magnetostriction and magnetocaloric effect are presented.Direct measurements of the adiabatic temperature change(ΔT_(ad))were carried out in alternating magnetic fields(AMF)using the magnetic field modulation method.Partial substitution of Fe atoms by Mn atoms leads to a shift in the Curie temperature(T_(C))towards lower temperatures without a noticeable deterioration in magnetic properties.A correlation was found between the structural component of the magnetocaloric effect and the stability of the frequency of theΔT_(ad)in the AMFs—an increase in the manganese concentration leads to a decrease in magnetostriction and to a lower dependence ofΔT_(ad)on the frequency of the magnetic field.Estimates of the specific cooling power Q_(C)as a function of the frequency of the AMF showed that the highest value of Q_(C)at f=20 Hz in a magnetic field of 12k Oe is 26.3 W g^(-1)and is observed for the composition with x=0.1.This value is higher than that of Gd,for which,under the same conditions,Q_(C)=21.6 W g^(-1).All the samples studied show stability of the value ofΔT_(ad)without any sign of deterioration of the effect up to 60,000cycles of switching on/off of the magnetic field of 12 k Oe.The discovered frequency and cyclic stability ofΔT_(ad)of the studied samples increase their prospects for application in magnetic cooling technology.
基金supported by the National Natural Science Foundation of China(Nos.22005277,52474256 and 52074247)the Natural Science Foundation of Hubei Province(No.2024AFB662)+1 种基金the Young Top-notch Talent Cultivation Program of Hubei Province,Opening Foundation of State Key Laboratory of Organic-Inorganic Composites,Beijing University of Chemical Technology(No.oic-202401012)the Fundamental Research Funds for National Universities,China University of Geosciences(No.2024XLA93).
文摘With the continuous advancement of electronic devices,flexible thin films with both thermal manage-ment functions and excellent electromagnetic interference(EMI)shielding properties have received much attention.Hence,inspired by Janus,a CNF/MXene/ZnFe2O4@PANI composite film with an asymmetric gradient alternating structure was successfully prepared by adjusting the filler content of the conduc-tive and magnetic layers using a vacuum-assisted filtration method.Benefiting from the magnetic reso-nance and hysteresis loss of ZnFe2O4@PANI,conductive loss and dipole polarization of MXene,as well as the exclusive"absorption-reflection-reabsorption"shielding feature in the alternating multilayered films,CM&CZFP-4 G film has superior EMI shielding performance,with an EMI SE of up to 45.75 dB and shield-ing effectiveness of 99.99%.Surprisingly,the composite film maintains reliable EMI shielding properties even after prolonged erosion in harsh environments such as high/low temperatures,high humidity,acids and alkalis.Furthermore,the CM&CZFP-4 G responded quickly within about 50 s and reached a maximum steady-state temperature of 235.8℃ at an applied voltage of 9.0 V,indicating the obtained film acquired outstanding and controllable Joule heating performance.This result was attributed to the homogeneous dispersion of MXene to build up a conductive network and endow the CNF/MXene with high conduc-tivity.Meanwhile,the fire resistance of CM&CZFP-4 G was significantly improved compared to pure CNF,which guaranteed fire safety during its application.Additionally,contributed by long fiber entanglement of CNF,extensive hydrogen-bonding interactions and multilayer structural design,the CM&CZFP-4 G film exhibits excellent mechanical characteristics,with the tensile strength and fracture strain of 27.74 MPa and 6.21%,separately.This work offers a creative avenue to prepare multifunctional composite films with electromagnetic shielding and Joule heating for various application environments.
基金Supported by Shanghai Municipal Health Commission’s Special Clinical Research Project for the Hygiene Industry,No.20244Y0041Youth Initiation Fund of Naval Medical University,No.2023QN028 and No.2023QN030。
文摘BACKGROUND Working memory serves as a fundamental cognitive function that substantially impacts performance in various cognitive tasks.Extensive neurophysiological research has established that theta oscillations(4-8 Hz)play an essential role in supporting working memory operations.Theta-band transcranial alternating current stimulation(tACS)offers a potential mechanism for working memory enhancement through direct modulation of these fundamental neural oscillations.Nevertheless,current empirical evidence shows substantial variability in the observed effects of theta-tACS across studies.AIM To conduct a systematic review and meta-analysis evaluating the effects of thetatACS on working memory performance in healthy adults.METHODS A systematic literature search was performed on PubMed,EMBASE,and Web of Science up to March 10,2025.Effect sizes were computed using Hedges’g with 95%confidence intervals(CIs),with separate meta-analyses for all included studies and for distinct working memory paradigms[n-back and delayed matchto-sample(DMTS)tasks]to examine potential task-specific effects.Subgroup analyses and meta-regression were performed to evaluate the influence of key moderating variables.RESULTS The systematic review included 21 studies(67 effect sizes).Initial meta-analysis showed theta-tACS moderately improved working memory(Hedges’g=0.405,95%CI:0.212-0.598).However,this effect became nonsignificant after correcting for publication bias(trim-and-fill adjusted Hedges’g=0.082,95%CI:-0.052 to 0.217).Task-specific analyses revealed significant benefits in n-back tasks(Hedges’g=0.463,95%CI:0.193-0.733)but not in DMTS tasks(Hedges’g=0.257,95%CI:-0.186 to 0.553).Moderator analyses showed that performance in n-back tasks was influenced by stimulation frequency(P=0.001),concurrent status(P=0.014),task modality(P=0.005),and duration(P=0.013),whereas only the region of targeted stimulation(P=0.012)moderated DMTS tasks.CONCLUSION Theta-tACS enhances working memory in healthy adults,with effects modulated by the task type and protocol parameters,offering dual implications for cognitive enhancement and clinical interventions.
基金supported by the National Natural Science Foundation of China(Grant No.52172356)the Hunan Provincial Natural Science Foundation of China(Grant No.2022JJ10012).
文摘The application of multi-material topology optimization affords greater design flexibility compared to traditional single-material methods.However,density-based topology optimization methods encounter three unique challenges when inertial loads become dominant:non-monotonous behavior of the objective function,possible unconstrained characterization of the optimal solution,and parasitic effects.Herein,an improved Guide-Weight approach is introduced,which effectively addresses the structural topology optimization problem when subjected to inertial loads.Smooth and fast convergence of the compliance is achieved by the approach,while also maintaining the effectiveness of the volume constraints.The rational approximation of material properties model and smooth design are utilized to guarantee clear boundaries of the final structure,facilitating its seamless integration into manufacturing processes.The framework provided by the alternating active-phase algorithm is employed to decompose the multi-material topological problem under inertial loading into a set of sub-problems.The optimization of multi-material under inertial loads is accomplished through the effective resolution of these sub-problems using the improved Guide-Weight method.The effectiveness of the proposed approach is demonstrated through numerical examples involving two-phase and multi-phase materials.
基金supported by the National Natural Science Foundation of China(No.52265054)the Inner Mongolia Autonomous Region Natural Science Foundation Project(No.2022ZD03)+3 种基金the Inner Mongolia Autonomous Region Science and Technology Plan Project(No.2020GG0313)the Inner Mongolia Autonomous Region Natural Science Foundation Doctoral Fund Project,(No.2021BS05016)the Construction project of integrated research and development platform for key technologies in the development and processing of new nonferrous metal materials(No.RZ2300001971)the Basic Research Business Fee Project for Autonomous Region Directly Affiliated Universities(Nos.JY20220199 and JY20220028).
文摘An alternating magnetic field(AMF)was introduced into the narrow gap laser-arc hybrid welding process for 2205 duplex stainless steel thick plates.The corrosion performance of the welded joints was evaluated through electrochemical studies.The results revealed that joints welded with the application of AMF had a lower corrosion current density compared to those welded without an external AMF.Additionally,these joints showed higher pitting potential and polarization resistance.Microscopic electrochemical analysis indicated that joints subjected to AMF exhibited minimal cathodic current in simulated seawater,with only slight fluctuations in the anodic current peak.Overall,the corrosion levels on the joint surfaces were relatively low.After 4 h of immersion in the corrosive medium,the average impedance of joints exposed to AMF increased by 60.7%compared to those not influenced by a magnetic field.These findings suggest that applying AMF during the narrow gap laser-arc hybrid welding process can significantly improve the corrosion resistance of duplex stainless steel welded joints,reducing their susceptibility to stress corrosion in seawater-like environments.
基金supported by the National Natural Science Foundation of China(62371225).
文摘The Global Position System(GPS)is a reliable method for positioning in most scenarios,but it falls short in harsh environments like urban vehicular scenarios,where numerous trees or flyovers obstruct the signals.This presents an unprecedented challenge for autonomous vehicles or applications requiring high accuracy.Fortunately,vehicular ad-hoc networks(VANET)offer an effective solution,where vehicle-to-vehicle(V2V)and vehicle-to-infrastructure(V2I)communications are used to enhance location awareness.In V2I communications,the roadside units(RSU)transmit beacon packets,and the vehicle receives numerous packets from different RSUs to establish communication.To further improve localization accuracy,a cross-covariance matrices-alternating least square(CCM-ALS)algorithm is proposed.The algorithm relies on ALS of the CCM for obtaining the position of vehicles in V2I communications.The algorithm is highly precise compared to traditional angle of arrival(AOA)positioning and not inferior to direct position determination(DPD)approaches while being low in complexity,which is crucial for moving vehicles.The numerical results verify the superiority of the proposed method.
基金supported by the National Natural Science Foundation of China(Grant Nos.62371069,62372048,and 62272056)BUPT Excellent Ph.D.Students Foundation(Grant No.CX2023123)。
文摘The quantum alternating operator ansatz algorithm(QAOA+)is widely used for constrained combinatorial optimization problems(CCOPs)due to its ability to construct feasible solution spaces.In this paper,we propose a progressive quantum algorithm(PQA)to reduce qubit requirements for QAOA+in solving the maximum independent set(MIS)problem.PQA iteratively constructs a subgraph likely to include the MIS solution of the original graph and solves the problem on it to approximate the global solution.Specifically,PQA starts with a small-scale subgraph and progressively expands its graph size utilizing heuristic expansion strategies.After each expansion,PQA solves the MIS problem on the newly generated subgraph using QAOA+.In each run,PQA repeats the expansion and solving process until a predefined stopping condition is reached.Simulation results show that PQA achieves an approximation ratio of 0.95 using only 5.57%(2.17%)of the qubits and 17.59%(6.43%)of the runtime compared with directly solving the original problem with QAOA+on Erd?s-Rényi(3-regular)graphs,highlighting the efficiency and scalability of PQA.
基金The Scientific Research Foundation of Nanjing University of Posts and Telecommunications(No.NY210049)
文摘A novel algorithm, i.e. the fast alternating direction method of multipliers （ADMM）, is applied to solve the classical total-variation （ TV ）-based model for image reconstruction. First, the TV-based model is reformulated as a linear equality constrained problem where the objective function is separable. Then, by introducing the augmented Lagrangian function, the two variables are alternatively minimized by the Gauss-Seidel idea. Finally, the dual variable is updated. Because the approach makes full use of the special structure of the problem and decomposes the original problem into several low-dimensional sub-problems, the per iteration computational complexity of the approach is dominated by two fast Fourier transforms. Elementary experimental results indicate that the proposed approach is more stable and efficient compared with some state-of-the-art algorithms.
文摘For Oppenheim series epansions, the authors of [7] discussed the exceptional sets Bm={x∈（0,1]：1〈dj（x）/h（j-1）（d（j-1）（x））≤m for any j ≥2} In this paper, we investigate the Hausdorff dimension of a kind of exceptional sets occurring in alternating Oppenheim series expansion. As an application, we get the exact Hausdorff dimension of the-set in Luroth series expansion, also we give an estimate of such dimensional number.
文摘The effects of alternating magnetic field on the corrosion morphologies, corrosion rate, and corrosion products of copper in 3.5% NaCl solution, sea water, and magnetized sea water were investigated using electrochemical test, scanning electron microscopy/energy dispersive analysis system of X-ray （SEM/EDAX）, and X-ray diffraction （XRD）. The results show that the corrosion rate of copper in magnetized sea water is minimal. Moreover, the surface of the specimen in magnetized sea water is uniform and compact as compared with those in 3.5% NaCl solution and sea water. The corrosion products of copper in magnetized sea water are mainly Cu2O and CuCl2. However, the corrosion products in sea water are CuCl, Cu2Cl（OH）3, and FeCl3-6H2O. The electrochemical corrosion mechanisms of copper in the three media were also discussed.
文摘For decades visual field defects were considered irreversible because it was thought that in the visual system the regeneration potential of the neuronal tissues is low.Nevertheless,there is always some potential for partial recovery of the visual field defect that can be achieved through induction of neuroplasticity.Neuroplasticity refers to the ability of the brain to change its own functional architecture by modulating synaptic efficacy.It is maintained throughout life and just as neurological rehabilitation can improve motor coordination,visual field defects in glaucoma,diabetic retinopathy or optic neuropathy can be improved by inducing neuroplasticity.In ophthalmology many new treatment paradigms have been tested that can induce neuroplastic changes,including non-invasive alternating current stimulation.Treatment with alternating current stimulation(e.g.,30 minutes,daily for 10 days using transorbital electrodes and^10 Hz)activates the entire retina and parts of the brain.Electroencephalography and functional magnetic resonance imaging studies revealed local activation of the visual cortex,global reorganization of functional brain networks,and enhanced blood flow,which together activate neurons and their networks.The future of low vision is optimistic because vision loss is indeed,partially reversible.
基金financially supported by the National Natural Science Foundation of China(Nos.51871049 and 51622106)the National Key R&D Program of China(No.2017YFB0702303)Aclass pilot of the Chinese Academy of Sciences(No.XDA22010303)。
文摘The stresses around bubbles formed on a coating/substrate interface under hydrostatic pressure(HP)and alternating hydrostatic pressure(AHP)were calculated using the finite element method.The results reveal that HP promotes coating failure but does not mechanically destroy the interface,whereas AHP can provide tensile stress on bubbles formed at the interface and accelerate disbonding of the coating.Because of water resistance,a lag time exists for the coating that serves in an AHP environment.The coating can have a better protective performance if the lag time suits the AHP to minimize the impact of the AHP on the interface.
基金This project is supported by National Natural Science Foundation of China(No.51975166)。
文摘Accumulative alternating back extrusion was a potential fine-grain modification method.In this paper,it was an innovative attempt to develop high-performance magnesium alloy sheet by this process.Under the condition of 350 K,commercial AZ31 magnesium alloy was made into billet by accumulative alternating back extrusion,and then extruded into fine-grain magnesium alloy sheet.Through a systematic study of its microstructure and mechanical properties,the results showed that the initial state had an important influence on the evolution of the structure during extrusion.After accumulative alternating back extrusion to produce the billet,the grain size of the sheet obtained by extrusion was significantly refined,which was related to the accumulation of deformation and grain refinement during the alternating loading process.Grain refinement caused the proportion of dynamic recrystallization inside the sheet with 2 cycles of accumulative alternating back extrusion to drop to 27%.With the increase of extrusion cycles from 2 to 4,the high density of dislocations led to an increase in the proportion of dynamic recrystallization and finer grains.The texture changed from strong basal texture to weak bimodal texture.The results of uniaxial tensile test show that due to grain refinement and texture change,the yield strength was significantly reduced,and the plasticity was significantly improved.It was verified that accumulative alternating back extrusion was meaningful for subsequent processing,and it also provided scientific guidance for the development of fine-grained magnesium alloy sheet.
基金sponsored by the Projects in the National Science & Technology Pillar Program during the Twelfth Five-year Plan Period(Grant No.2011BAK06B01)
文摘With rapid economic development in China, demand for energy and transportation is growing. Due to the limitations of factors such as terrain and traffic, a large number of buried oil and gas pipelines are parallel to high- voltage transmission lines and electrified railways over long distances. Alternating pipelines is very serious in laboratory experiments were current （AC） corrosion of such cases. In this work, carried out with an electrochemical method in a simulated soil solution at various AC current densities from 0 to 200 A]m2 and AC frequencies from 10 to 200 Hz. Experimental results indicated that with an increase in the AC current density, the corrosion po- tential of an X60 steel electrode shifted negatively, the anodic current density increased significantly, and the corrosion rate increased. Moreover, with an increase in the AC frequency, the corrosion potential of the X60 electrode shifted positively and the anodic current density decreased, which led to a decrease in the corrosion rate. Furthermore, the morphology of X60 electrodes indicated that uniform corrosion occurred at a low AC current density; while corrosion pits were found on the X60 electrode surface at a high AC current density, and deep corrosion pits seriously damaged the pipelines and might lead to leakage.
文摘Direct seeded rice is promising alternative to traditional transplanting, but requires appropriate crop and water management to maintain yield performance and achieve high water productivity. Present study evaluated the effect of seed priming and irrigation on crop establishment, tillering, agronomic traits, paddy yield, grain quality and water productivity of direct seeded rice in alternate wetting and drying （DSR-AWD） in comparison with direct seeded rice at field capacity （DSR- FC）. Seed priming treatments were osmo-priming with KCI （2.2%）, CaCI2 （2.2%） and moringa leaf extracts （MLE, 3.3%） including hydro-priming as control. Among the treatments, seed osmo-primed with MLE emerged earlier and had higher final emergence, followed by osmo-priming with CaCI2. Tillering emergence rate and number of tillers per plant were the highest for seed priming with CaCI2 in DSR- AWD. Total productive and non-productive tillers, panicle length, biological and grain yields, harvest index were highest for seed priming with MLE or CaCI2 in DSR-AWD. Similarly, grain quality, estimated in terms of normal grains, abortive and chalky grains, was also the highest in DSR-AWD with MLE osmo-priming. Benefit cost ratio and water productivity was also the highest in DSR-AWD for seed priming with MLE. In conclusion, seed priming with MLE or CaCI2 can be successfully employed to improve the direct seeded rice performance when practiced with alternate wetting and drying irrigation.
基金Project supported by the National Natural Science Foundation of China(No.11472239)
文摘The nonlinear combined resonance problem of a ferromagnetic circular plate in a transverse alternating magnetic field is investigated. On the basis of the deformation potential energy, the strain potential energy, and the kinetic energy of the circular plate, the Hamilton principle is used to induce the magnetoelastic coupling transverse vibration dynamical equation of the ferromagnetic circular plate. Based on the basic electromagnetic theory, the expressions of the magnet force and the Lorenz force of the circular plate are presented. A displacement function satisfying clamped-edge combined with the Galerkin method is used to derive the Duffing vibration differential equation of the circular plate. The amplitude-frequency response equations of the system under various combined resonance forms are obtained by means of the multi-scale method, and the stability of the steady-state solutions is analyzed according to the Lyapunov theory. Through examples, the amplitude-frequency characteristic curves with different parameters, the amplitude of resonance varying with magnetic field intensity and excitation force, and the time-course response diagram, phase diagram, Poincar′e diagram of the system vibration are plotted, respectively. The effects of different parameters on the amplitude and stability of the system are discussed. The results show that the electromagnetic parameters have a significant effect on the multi-valued attribute and stability of the resonance solutions, and the system may exhibit complex nonlinear dynamical behavior including multi-period and quasi-periodic motion.
基金the National High Technology Research and Development Program of China(Grant No.2012AA011603)
文摘Linear scan computed tomography （LCT） is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in practical applications of LCT, there are challenges to image reconstruction due to limited-angle and insufficient data. In this paper, a new reconstruction algorithm based on total-variation （TV） minimization is developed to reconstruct images from limited-angle and insufficient data in LCT. The main idea of our approach is to reformulate a TV problem as a linear equality constrained problem where the objective function is separable, and then minimize its augmented Lagrangian function by using alternating direction method （ADM） to solve subproblems. The proposed method is robust and efficient in the task of reconstruction by showing the convergence of ADM. The numerical simulations and real data reconstructions show that the proposed reconstruction method brings reasonable performance and outperforms some previous ones when applied to an LCT imaging problem.
文摘To develop technically feasible and economically favorable dynamic process control(DPC)strategies for an alternating activated sludge(AAS)system,a bench-scale continuous-flow alternating aerobic and anoxic reactor,performing short-cut nitrogen removal from real domestic wastewater was operated under different control strategies for more than five months.A fixed-time control(FTC) study showed that bending-points on pH and oxidation-reduction potential(ORP)profiles accurately coincided with the major biologic...
