A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtai...A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtained. For a multicomponent system in which (n-2) pure phases are added into an n-phase compnent sample and theweight fractions of all n phases can be determined by the method. The test results of confirmation agree well with the theory.展开更多
A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as ...A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.展开更多
A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as ...A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.展开更多
A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical ph...A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical phase to the analyzed sample is not required in this method and the experimental results are satisfactory.展开更多
A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample ...A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.展开更多
Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag ha...Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag has been performed by the Rietveld method based on the powder X-ray diffraction(XRD) with the aid of noncommercial software GSAS-EXPGUI.A known weight of crystalline internal standard(10% CaF_2) was added to the calcium silicate slag to calculate the fraction of amorphous phase and other crystalline phases on an absolute basis.Besides,the calcium silicate slag was characterized by X-ray fluorescence(XRF) and thermo gravimetric(TG) differential scanning calorimetry(DSC) to test the QPA results and investigate its other characters.Finally,the results show that the amorphous fraction is 17.5%(hereinafter,the percentages refer to the mass fraction),and the major crystalline phases detected in the calcium silicate slag consist of 23.5% Beta-Ca_2 SiO_4,10.0% bredigite,10.3% Ca_3Al_2O_6(C_3A) and 21.6% CaCO_3.展开更多
Flupirtine maleate, a pharmaceutical compound for treating psychotic disease in clinics, has seven polymorphs. Form A, with better crystal stability and bioavailability, has been widely used as the pharmaceutical crys...Flupirtine maleate, a pharmaceutical compound for treating psychotic disease in clinics, has seven polymorphs. Form A, with better crystal stability and bioavailability, has been widely used as the pharmaceutical crystal form. Unfortunately, it is usually found in a polymorphic mixture with form B. In this study, pure crystal forms of A and B were prepared and characterized by X-ray powder diffraction （XRPD）, Fourier transform infrared spectroscopy （FT-IR） and thermal analysis. An XRPD-based method for the quantitative determination of the amount of the flupirtine maleate polymorphs form A and form B was also established through a systematic optimization of instrumental parameters. The results of the analytical methodology validation showed that the XPRD method had a broad quantitative range of 0- 100% （w/w）, good linear relationship, with R2= 0.999, excellent repeatability and precision and low limits of detection （LoD） of 0.15% （w/w） and quantification （LoQ） of 0.5% （w/w）. The results also showed that the single-peak method was not as good as the whole pattern in reducing the influence of the preferred orientation, but this can be compensated for by a systematic optimization of instrumental parameters and validating the analytical methodology to reduce errors and obtain a good, repeatable, sensitive, and accurate method. This XRPD method can be used to analyze mixtures of flupirtine maleate polymorphs （forms A and B） quantitatively and control the quality of the bulk drug.展开更多
Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the specia...Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the speciation of P and the leaching conditions.In this study,hydrochloric acid was used as a leaching agent,and the effects of the hydrochloric acid concentration,leaching time,temperature,and liquid-solid ratio on the P leaching ratio were investigated.Furthermore,the co-leaching of macro-metals Ca,Al,Fe,and Mg was analyzed.The results showed that P leached rapidly within 30 min,where the leaching rate reached more than 80%and then gradually stabilized.The leaching concentrations of Ca and Mg had a significant correlation(correlation coefficient r^(2)>0.90),and both were leached completely.Al and P had similar leaching patterns,where the leaching rates increased initially and then decreased with time at 0.2 mol/L HCl.According to X-ray diffraction analysis and Rietveld refinement,the P in ISSA was mainly present in the forms of Mg_(3)Ca_(3)(PO_(4))_(4) and AlPO_(4).When leached using 0.2 mol/L HCl at 55℃ with a liquid-to-solid ratio of 20 L/kg,the AlPO_(4) and Fe_(3)(H_(2)O)_(3)(PO_(4))_(2) in ISSA dissolved initially and then precipitated on the surface of the solid phase,thereby impeding further P leaching.展开更多
X-ray diffraction (XRD) peaks in a low-angle diffraction section of clayminerals, especially those of authigenic origin, have broadening and tailing features in shape.Using the five basic parameters, peak position, pe...X-ray diffraction (XRD) peaks in a low-angle diffraction section of clayminerals, especially those of authigenic origin, have broadening and tailing features in shape.Using the five basic parameters, peak position, peak height, width, shape coefficient and asymmetry,to describe an XRD peak is more accurate, comprehensive and integrated than using only 3 of them,position, height and width. Following the concept of the five basic parameters of an XRD peak, theprogram Decoform proposed in this study provides more information in mineralogical analyses byfitting actual XRD profiles. In combination with the HW-IR plot, Decoform can he systematically andaccurately used in the comprehensive analyses of crystallinity, domain size, lattice strain andquantitative phase. It is also of value for the geological investigations of diagenesis,metamorphism, basin maturity, structural stress field and so on.展开更多
The phase diagram of the CsBr-CaBr2 system was re-determined by using differential thermal analysis and high ternperature and room ternperature X-ray diffraction analysis. It is concluded that there are three intermed...The phase diagram of the CsBr-CaBr2 system was re-determined by using differential thermal analysis and high ternperature and room ternperature X-ray diffraction analysis. It is concluded that there are three intermediate compounds in this system： a.congruently melting compound, CsCaBr3, with a melting point of 823℃ and two incongruently melting compounds, Cs2CaBr4 and Cs3Ca2Br7, whose peritectic points being 597℃ and 635℃, respectively. X-ray diffraction analysis indicated that compound CsCaBr3 is of slightly distorted perovskite structure.展开更多
Deformed high lead-brasses have excellent machining characteristics and good mechanical and physicalproperties.They are widely used in mechanical,clock-watch and pen-making field.Especially,they are suit-able for deep...Deformed high lead-brasses have excellent machining characteristics and good mechanical and physicalproperties.They are widely used in mechanical,clock-watch and pen-making field.Especially,they are suit-able for deep-hole machining.Because of their worse hot-working characteristics,there exists trouble inproduction process.It is reported that the rare earth metals could improve the hot-rolling property,but themechanism is still unclear.展开更多
Phase equilibrium in the ternary CuO-PbO-Ag system has been investigated using differential thermal analysis(DTA),thermogravimetry(TG),scanning electron microscopy(SEM) and X-ray diffraction(XRD) techniques.In the ter...Phase equilibrium in the ternary CuO-PbO-Ag system has been investigated using differential thermal analysis(DTA),thermogravimetry(TG),scanning electron microscopy(SEM) and X-ray diffraction(XRD) techniques.In the ternary CuO-PbO-Ag system,there is a eutectic reaction CuO+PbO+Ag=L at 750℃ and a composition of 12.04 mol.% Ag,16.35 mol.% CuO and 71.61 mol.% PbO.Two miscibility gaps near the two binary tie lines PbO-Ag and CuO-Ag were detected. No binary or ternary compound was detected in the ternary system.SEM and energy dispersive spectroscopy(EDS) confirm the presence of two liquid phases and the eutectic point.展开更多
文摘A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtained. For a multicomponent system in which (n-2) pure phases are added into an n-phase compnent sample and theweight fractions of all n phases can be determined by the method. The test results of confirmation agree well with the theory.
文摘A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.
文摘A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.
文摘A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical phase to the analyzed sample is not required in this method and the experimental results are satisfactory.
文摘A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.
基金the National Natural Science Foundation of China(Nos.51302012 and 51274042)the China Postdoctoral Science Foundation Funded Project(No.2016T90034)the Inner Mongolia Science and Technology Major Projects 2013
文摘Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag has been performed by the Rietveld method based on the powder X-ray diffraction(XRD) with the aid of noncommercial software GSAS-EXPGUI.A known weight of crystalline internal standard(10% CaF_2) was added to the calcium silicate slag to calculate the fraction of amorphous phase and other crystalline phases on an absolute basis.Besides,the calcium silicate slag was characterized by X-ray fluorescence(XRF) and thermo gravimetric(TG) differential scanning calorimetry(DSC) to test the QPA results and investigate its other characters.Finally,the results show that the amorphous fraction is 17.5%(hereinafter,the percentages refer to the mass fraction),and the major crystalline phases detected in the calcium silicate slag consist of 23.5% Beta-Ca_2 SiO_4,10.0% bredigite,10.3% Ca_3Al_2O_6(C_3A) and 21.6% CaCO_3.
基金supported by the Major Program of Ministry of Science and Technology of China(No:2015ZX09J15104-003002)
文摘Flupirtine maleate, a pharmaceutical compound for treating psychotic disease in clinics, has seven polymorphs. Form A, with better crystal stability and bioavailability, has been widely used as the pharmaceutical crystal form. Unfortunately, it is usually found in a polymorphic mixture with form B. In this study, pure crystal forms of A and B were prepared and characterized by X-ray powder diffraction （XRPD）, Fourier transform infrared spectroscopy （FT-IR） and thermal analysis. An XRPD-based method for the quantitative determination of the amount of the flupirtine maleate polymorphs form A and form B was also established through a systematic optimization of instrumental parameters. The results of the analytical methodology validation showed that the XPRD method had a broad quantitative range of 0- 100% （w/w）, good linear relationship, with R2= 0.999, excellent repeatability and precision and low limits of detection （LoD） of 0.15% （w/w） and quantification （LoQ） of 0.5% （w/w）. The results also showed that the single-peak method was not as good as the whole pattern in reducing the influence of the preferred orientation, but this can be compensated for by a systematic optimization of instrumental parameters and validating the analytical methodology to reduce errors and obtain a good, repeatable, sensitive, and accurate method. This XRPD method can be used to analyze mixtures of flupirtine maleate polymorphs （forms A and B） quantitatively and control the quality of the bulk drug.
基金supported by the Major Science and Technology Program for Water Pollution Control and Treatment(2017ZX07202005).
文摘Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the speciation of P and the leaching conditions.In this study,hydrochloric acid was used as a leaching agent,and the effects of the hydrochloric acid concentration,leaching time,temperature,and liquid-solid ratio on the P leaching ratio were investigated.Furthermore,the co-leaching of macro-metals Ca,Al,Fe,and Mg was analyzed.The results showed that P leached rapidly within 30 min,where the leaching rate reached more than 80%and then gradually stabilized.The leaching concentrations of Ca and Mg had a significant correlation(correlation coefficient r^(2)>0.90),and both were leached completely.Al and P had similar leaching patterns,where the leaching rates increased initially and then decreased with time at 0.2 mol/L HCl.According to X-ray diffraction analysis and Rietveld refinement,the P in ISSA was mainly present in the forms of Mg_(3)Ca_(3)(PO_(4))_(4) and AlPO_(4).When leached using 0.2 mol/L HCl at 55℃ with a liquid-to-solid ratio of 20 L/kg,the AlPO_(4) and Fe_(3)(H_(2)O)_(3)(PO_(4))_(2) in ISSA dissolved initially and then precipitated on the surface of the solid phase,thereby impeding further P leaching.
基金the National Natural Science Foundation of China (Grant No.49872033) the special pre-research project of the Basic Scientific Program.the Ministry of Science and Technology of China (Grant No. 2001CCA02400).
文摘X-ray diffraction (XRD) peaks in a low-angle diffraction section of clayminerals, especially those of authigenic origin, have broadening and tailing features in shape.Using the five basic parameters, peak position, peak height, width, shape coefficient and asymmetry,to describe an XRD peak is more accurate, comprehensive and integrated than using only 3 of them,position, height and width. Following the concept of the five basic parameters of an XRD peak, theprogram Decoform proposed in this study provides more information in mineralogical analyses byfitting actual XRD profiles. In combination with the HW-IR plot, Decoform can he systematically andaccurately used in the comprehensive analyses of crystallinity, domain size, lattice strain andquantitative phase. It is also of value for the geological investigations of diagenesis,metamorphism, basin maturity, structural stress field and so on.
文摘The phase diagram of the CsBr-CaBr2 system was re-determined by using differential thermal analysis and high ternperature and room ternperature X-ray diffraction analysis. It is concluded that there are three intermediate compounds in this system： a.congruently melting compound, CsCaBr3, with a melting point of 823℃ and two incongruently melting compounds, Cs2CaBr4 and Cs3Ca2Br7, whose peritectic points being 597℃ and 635℃, respectively. X-ray diffraction analysis indicated that compound CsCaBr3 is of slightly distorted perovskite structure.
文摘Deformed high lead-brasses have excellent machining characteristics and good mechanical and physicalproperties.They are widely used in mechanical,clock-watch and pen-making field.Especially,they are suit-able for deep-hole machining.Because of their worse hot-working characteristics,there exists trouble inproduction process.It is reported that the rare earth metals could improve the hot-rolling property,but themechanism is still unclear.
文摘Phase equilibrium in the ternary CuO-PbO-Ag system has been investigated using differential thermal analysis(DTA),thermogravimetry(TG),scanning electron microscopy(SEM) and X-ray diffraction(XRD) techniques.In the ternary CuO-PbO-Ag system,there is a eutectic reaction CuO+PbO+Ag=L at 750℃ and a composition of 12.04 mol.% Ag,16.35 mol.% CuO and 71.61 mol.% PbO.Two miscibility gaps near the two binary tie lines PbO-Ag and CuO-Ag were detected. No binary or ternary compound was detected in the ternary system.SEM and energy dispersive spectroscopy(EDS) confirm the presence of two liquid phases and the eutectic point.
