The development of an analytical method for determining the properties of quantum dots(QDs)is crucial for improving the optical performance of QD-based displays.Therefore,synchrotron-based X-ray photoelectron spectros...The development of an analytical method for determining the properties of quantum dots(QDs)is crucial for improving the optical performance of QD-based displays.Therefore,synchrotron-based X-ray photoelectron spectroscopy(XPS)is designed here to accurately characterize the chemical and structural differences between different QDs.This method enables the determination of the reason for the minimal differences between the optical properties of different QDs depending on the synthesis process,which is difficult to determine using conventional methods alone.Combined with model simulations,the XPS spectra obtained at different photon energies reveal the internal structures and chemical-state distributions of the QDs.In particular,the QD synthesized under optimal conditions demonstrates a relatively lower degree of oxidation of the core and more uniformly stacked ZnSe/ZnS shell layers.The internal structures and chemical-state distributions of QDs are closely related to their optical properties.Finally,the synchrotron-based XPS proposed here can be applied to compare nearly equivalent QDs with slightly different optical properties.展开更多
Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrol...Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrolyte/electrode interfaces is essential for developing advanced renewable energy technologies.However,the direct probing of real-time interfacial changes,i.e.,the surface intermediates,chemical environment,and electronic structure,under operating conditions is challenging and necessitates the use of in situ methods.Herein,we present a new lab-based instrument commissioned to perform in situ chemical analysis at liquid/solid interfaces using ambient pressure X-ray photoelectron spectroscopy(APXPS).This setup takes advantage of a chromium source of tender X-rays and is designed to study liquid/solid interfaces by the“dip and pull”method.Each of the main components was carefully described,and the results of performance tests are presented.Using a three-electrode setup,the system can probe the intermediate species and potential shifts across the liquid electrolyte/solid electrode interface.In addition,we demonstrate how this system allows the study of interfacial changes at gas/solid interfaces using a case study:a sodium–oxygen model battery.However,the use of APXPS in electrochemical studies is still in the early stages,so we summarize the current challenges and some developmental frontiers.Despite the challenges,we expect that joint efforts to improve instruments and the electrochemical setup will enable us to obtain a better understanding of the composition–reactivity relationship at electrochemical interfaces under realistic reaction conditions.展开更多
Silicon nanopillars are fabricated by inductively coupled plasma （ICP） dry etching with the cesium chloride （CsCl） islands as masks originally from self-assembly. Wafers with nanopillar texture or planar surface a...Silicon nanopillars are fabricated by inductively coupled plasma （ICP） dry etching with the cesium chloride （CsCl） islands as masks originally from self-assembly. Wafers with nanopillar texture or planar surface are subjected to phosphorus （P） diffusion by liquid dopant source （POCl3） at 870 ℃ to form P-N junctions with a depth of 300 nm. The X-ray photoelectron spectroscopy （XPS） is used to measure the Si 2p core levels of P-N junction wafer with nanopillar texture and planar surface. With a visible light excitation, the P-N junction produces a new electric potential for photoelectric characteristic, which causes the Si 2p core level to have a energy shift compared with the spectrum without the visible light. The energy shift of the Si 2p core level is -0.27 eV for the planar P-N junction and -0.18 eV for the nanopillar one. The difference in Si 2p energy shift is due to more space lattice defects and chemical bond breaks for nanopillar compared with the planar one.展开更多
This paper reports how pyrite films were prepared by thermal sulfurization of magnetron sputtered iron films and characterized by X-ray absorption near edge structure spectra and X-ray photoelectron spectroscopy on a ...This paper reports how pyrite films were prepared by thermal sulfurization of magnetron sputtered iron films and characterized by X-ray absorption near edge structure spectra and X-ray photoelectron spectroscopy on a 4B9B beam line at the Beijing Synchrotron Radiation Facility. The band gap of the pyrite agrees well with the optical band gap obtained by a spectrophotometer. The octahedral symmetry of pyrite leads to the splitting of the d orbit into t2g and eg levels. The high spin and low spin states were analysed through the difference of electron exchange interaction and the orbital crystal field. Only when the crystal field splitting is higher than 1.5 eV, the two weak peaks above the white lines can appear, and this was approved by experiments in the present work.展开更多
TixAl1-xN films have been prepared by RF reactive magnetron sputtering. X-ray diffraction results showed that TixAl1-xN thin films in this study were hexagonal wurtzite structure with the Ti content up to 0.18. X-ray ...TixAl1-xN films have been prepared by RF reactive magnetron sputtering. X-ray diffraction results showed that TixAl1-xN thin films in this study were hexagonal wurtzite structure with the Ti content up to 0.18. X-ray photoelectron spectrocopy studies provided that the Nls core-electron spectrum of TixAl1-xN thin film brodend with increasing Ti content, and the difference of the chemical shifts for Ti2p3/2 line between TiN and TixAl1-xN th77pj in film was 0.7 eV.展开更多
Understanding the evolution of the solid electrolyte-electrode interface is currently one of the most challenging obstacles in the development of solid-state batteries(SSBs).Here,we develop an X-ray Photoelectron Spec...Understanding the evolution of the solid electrolyte-electrode interface is currently one of the most challenging obstacles in the development of solid-state batteries(SSBs).Here,we develop an X-ray Photoelectron Spectroscopy(XPS)that allows for operando measurement during cycling.Based on theoretical analysis and the modulated electrode and detector co-grounding mode,the displacement of binding energy can be correlated with the surface electrostatic potential of the material,revealing the charge distribution and composition evolution of the space charge layer between the cathode and the electrolyte.In the investigation of typical LiCoO_(2)(LCO)/Li6PS5Cl(LPSC)/Li-In batteries,we observed the static potential difference and oxidative decomposition between LPSC and LCO,and the effectiveness of the LiNbO3 coating in reducing potential difference and inhibiting the diffusion of Co and oxidation of S species.Furthermore,our study also revealed that the potential drop between LiNi0⋅8Co0⋅1Mn0⋅1O_(2) and LPSC is smaller than that of LCO,whilst that between Li3InCl6 and LCO remains near zero.The proposed operando XPS method offers a novel approach for real-time monitoring of interface potential and species formation,providing rational guidance for the interface engineering in SSBs.展开更多
Different monolayers （ML） of Fe atoms were deposited on NiO （001） substrates or NiO underlayers using molecular beam epitaxy （MBE）, pulse laser deposition （PLD）, and magnetron sputtering （MS）. The magnetic p...Different monolayers （ML） of Fe atoms were deposited on NiO （001） substrates or NiO underlayers using molecular beam epitaxy （MBE）, pulse laser deposition （PLD）, and magnetron sputtering （MS）. The magnetic properties and microstructure of the films were studied. The apparent magnetic dead layer （MDL） is found to exist at the NiO/Fe interfaces of the MBE sample （about 2 ML MDL）, the PLD sample （about 3 ML MDL）, and the MS sample （about 4 ML MDL）. X-ray photoelectron spectroscopy indicates the presence of ionic Fe （Fe2＋ or Fe3＋） and metallic Ni at the NiO/Fe interfaces, which may be due to the chemical reactions between Fe and NiO layers. This also leads to the formation of MDL. The thickness of the MDL and the reaction products are related with the deposition energy of the atoms on the substrates. The interfacial reactions are effectively suppressed by inserting a thin Pt layer at the NiO/Fe interface.展开更多
The chemisorbed structure for an aromatic molecule on a silicon surface plays an important part in promoting the development of organic semiconductor material science. The carbon K-shell x-ray photoelectron spectrosc...The chemisorbed structure for an aromatic molecule on a silicon surface plays an important part in promoting the development of organic semiconductor material science. The carbon K-shell x-ray photoelectron spectroscopy（XPS） and the x-ray absorption near-edge structure（XANES） spectra of the interfacial structure of an s-triazine molecule adsorbed on Si（100） surface have been performed by the first principles, and the landscape of the s-triazine molecule on Si（100） surface has been described in detail. Both the XPS and XANES spectra have shown their dependence on different structures for the pristine s-triazine molecule and its several possible adsorbed configurations. By comparison with the XPS spectra, the XANES spectra display the strongest structural dependency of all of the studied systems and thus could be well applied to identify the chemisorbed s-triazine derivatives. The exploration of spectral components originated from non-equivalent carbons in disparate local environments has also been implemented for both the XPS and XANES spectra of s-triazine adsorbed configurations.展开更多
ZnO-based catalysts have been intensively studied because of their extraordinary performance in lower olefin synthesis,methanol synthesis and water-gas shift reactions.However,how ZnO catalyzes these reactions are sti...ZnO-based catalysts have been intensively studied because of their extraordinary performance in lower olefin synthesis,methanol synthesis and water-gas shift reactions.However,how ZnO catalyzes these reactions are still not well understood.Herein,we investigate the activations of CO_(2),O_(2)and CO on single crystalline ZnO polar surfaces at room temperature,through in-situ near-ambient-pressure X-ray photoelectron spectroscopy(NAP-XPS).It is revealed that O_(2)and CO_(2)can undergo chemisorption on ZnO polar surfaces at elevated pressures.On the ZnO(0001)surface,molecular CO_(2)(O_(2))can chemically interact with the top layer Zn atoms,leading to the formation of CO_(2)^(δ-)(O_(2)^(δ-))or partially dissociative atomic oxygen(O-)and hence the electron depletion layer in ZnO.Therefore,an apparent upward band-bending in ZnO(0001)is observed under the CO_(2)and O_(2)exposure.On the ZnO(0001)surface,the molecular chemisorbed CO_(2)(O_(2))mainly bond to the surface oxygen vacancies,which also results in an upward bandbending in ZnO(0001).In contrast,no band-bending is observed for both ZnO polar surfaces upon CO exposure.The electron-acceptor nature of the surface bounded molecules/atoms is responsible for the reversible binding energy shift of Zn 2 p_(3/2)and O 1 s in ZnO.Our findings can shed light on the fundamental understandings of CO_(2)and O_(2)activation on ZnO surfaces,especially the role of ZnO in heterogeneous catalytic reactions.展开更多
Theε-Ga2O3 p-n heterojunctions(HJ)have been demonstrated using typical p-type oxide semiconductors(NiO or SnO).Theε-Ga2O3 thin film was heteroepitaxial grown by metal organic chemical vapor deposition(MOCVD)with thr...Theε-Ga2O3 p-n heterojunctions(HJ)have been demonstrated using typical p-type oxide semiconductors(NiO or SnO).Theε-Ga2O3 thin film was heteroepitaxial grown by metal organic chemical vapor deposition(MOCVD)with three-step growth method.The polycrystalline SnO and NiO thin films were deposited on theε-Ga2O3 thin film by electron-beam evaporation and thermal oxidation,respectively.The valence band offsets(VBO)were determined by x-ray photoelectron spectroscopy(XPS)to be 2.17 eV at SnO/ε-Ga2O3 and 1.7 eV at NiO/ε-Ga2O3.Considering the bandgaps determined by ultraviolet-visible spectroscopy,the conduction band offsets(CBO)of 0.11 eV at SnO/ε-Ga2O3 and 0.44 eV at NiO/ε-Ga2O3 were obtained.The type-Ⅱband diagrams have been drawn for both p-n HJs.The results are useful to understand the electronic structures at theε-Ga2O3 p-n HJ interface,and design optoelectronic devices based onε-Ga2O3 with novel functionality and improved performance.展开更多
[Objective] The aim was to improve the adhesive bonding property of wheat straw surface to prepare wheat straw particleboard of soy protein isolate （SPI） adhesive through chemical and enzyme treatments. [Method] Eva...[Objective] The aim was to improve the adhesive bonding property of wheat straw surface to prepare wheat straw particleboard of soy protein isolate （SPI） adhesive through chemical and enzyme treatments. [Method] Evaluation and analysis were made on wettability of wheat straws in the control group and treated groups （chemical and enzyme treatments） by means of measurement of contact angle and calculation of spreading-penetration parameters （K）. In addition, we made analysis on surface elements through X-ray photoelectron spectroscopy （XPS）. [Result] The re- sults showed that K value of straw treated with sodium hydroxide, hydrogen peroxide and lipase increased by 58.0%, 48.7% and 83.2% compared to that of control group, respectively. The XPS analysis indicated that rapid decrease of silicon content and destruction of wax layer greatly contributed to wettability improvement of wheat straw surface. [Conclusion] The chemical and lipase treatments of wheat straw provided technical support for manufacture of wheat straw particle boand.展开更多
NdCl 3 FeCl 3 graphite intercalation compounds were synthesized by molten salt exchange method. The state of the intercalates and the relative contents of Nd, Fe, Cl, C in the product were determined by X ray ph...NdCl 3 FeCl 3 graphite intercalation compounds were synthesized by molten salt exchange method. The state of the intercalates and the relative contents of Nd, Fe, Cl, C in the product were determined by X ray photoelectron spectroscopy(XPS). From the XPS data, it is concluded that the binding energy of Fe2p electrons is about 711 20～710 3 eV, the binding energy of Nd3d electrons is about 983 08～983 20 eV, and Fe in the product has two valence states (Fe 3+ and Fe 2+ ).展开更多
With the increasing interest in Cu2O-based devices for photovoltaic applications,the energy band alignment at the Cu2O/ZnO heterojunction has received more and more attention.In this work,a high-quality Cu2O/ZnO heter...With the increasing interest in Cu2O-based devices for photovoltaic applications,the energy band alignment at the Cu2O/ZnO heterojunction has received more and more attention.In this work,a high-quality Cu2O/ZnO heterojunction is fabricated on a c-Al2 O3 substrate by laser-molecular beam epitaxy,and the energy band alignment is determined by x-ray photoelectron spectroscopy.The valence band of ZnO is found to be 1.97 eV below that of Cu2O.A type-II band alignment exists at the Cu2O/ZnO heterojunction with a resulting conduction band offset of 0.77 eV,which is especially favorable for enhancing the efficiency of Cu2O/ZnO solar cells.展开更多
Thin carbon nitride (CNx) films were synthesized on silicon substrates by reactive RF magnetron sputtering of a graphite target in mixed N2/Ar discharges and the N2 gas fraction in the discharge gas, F N, varied from ...Thin carbon nitride (CNx) films were synthesized on silicon substrates by reactive RF magnetron sputtering of a graphite target in mixed N2/Ar discharges and the N2 gas fraction in the discharge gas, F N, varied from 0.5 to 1.0. The atomic bonding configuration and chemical composition in the CNx films were examined using X-ray photoelectron spectroscopy (XPS) and the degree of structural disorder was studied using Raman spectroscopy. An increase in the nitrogen content in the film from 19 to 26 at% was observed at FN = 0.8 and found to influence the film properties;normality tests suggested that the data obtained at FN = 0.8 are not experimental errors. The interpretation of XPS spectra might not be always straightforward and hence the detailed and quantitative comparison of the XPS data with the information acquired by Raman spectroscopy enabled us to interpret the decomposed peaks in the N 1s and C 1s XPS spectra. Two N 1s XPS peaks at 398.3 and 399.8 eV (peaks N1 and N2, respectively) were assigned to a sum of pyridine-like nitrogen and -C≡N bond, and to a sum of pyrrole-like nitrogen and threefold nitrogen, respectively. Further, the peaks N1 and N2 were found to correlate with C 1s XPS peaks at 288.2 and 286.3 eV, respectively;the peak at 288.2 eV might include a contribution of sp3 carbon.展开更多
Nano-scale chemical inhomogeneity in surface oxide films formed on a V-and N-containing martensite stainless steel and tempering heating induced changes are investigated by a combination of synchrotron-based hard X-ra...Nano-scale chemical inhomogeneity in surface oxide films formed on a V-and N-containing martensite stainless steel and tempering heating induced changes are investigated by a combination of synchrotron-based hard X-ray Photoelectron emission spectroscopy(HAXPES)and microscopy(HAXPEEM)as well as microscopic X-ray absorption spectroscopy(μ-XAS)techniques.The results reveal the inhomogeneity in the oxide films on the micron-sized Cr_(2)N-and VN-type particles,while the inhomogeneity on the martensite matrix phase exists due to localised formation of nano-sized tempering nitride particles at 600℃.The oxide film formed on Cr_(2)N-type particles is rich in Cr_(2)O_(3) compared with that on the martensite matrix and VN-type particles.With the increase of tempering temperature,Cr_(2)O_(3) formation is faster for the oxidation of Cr in the martensite matrix than the oxidation of Cr nitride-rich particles.展开更多
This research investigates the adsorptionmechanisms of fluoride(F)on four clay minerals(kaolinite,montmorillonite,chlorite,and illite)underdifferent F^(-)concentrations and reaction times by probingtheir fluoride supe...This research investigates the adsorptionmechanisms of fluoride(F)on four clay minerals(kaolinite,montmorillonite,chlorite,and illite)underdifferent F^(-)concentrations and reaction times by probingtheir fluoride superficial layer binding energies and elementcompositions using X-ray photoelectron spectroscopy(XPS).At high F^(-)concentrations(C_(0)=5-1000 mg·L^(-1)),the amount of F^(-)adsorbed(Q_(F)),amount of hydroxidereleased by clay minerals,solution F^(-)concentration,andthe pH increase with increasing C_(0).The increases areremarkable at C_(0)>50 mg·L^(-1).The QF increases significantlyby continuously modifying the pH level.At C_(0)<5-100 mg·L^(-1),clay minerals adsorb H+to protonatealuminum-bound surface-active hydroxyl sites in thesuperficial layers and induce F^(-)binding.As the C_(0)increases,F^(-),along with other cations,is adsorbed toform a quasi-cryolite structure.At C_(0)>100 mg·L^(-1),newminerals precipitate and the product depends on the criticalAl^(3+)concentration.At[Al^(3+)]>10^(-11.94)mol·L^(-1),cryoliteforms,while at[Al^(3+)]<10^(-11.94)mol·L^(-1),AlF_(3)is formed.At low C_(0)(0.3-1.5 mg·L^(-1)),proton transfer occurs,andthe F^(-)adsorption capabilities of the clay minerals increasewith time.展开更多
Two-dimensional(2D)WS_(2)films were deposited on SiO_(2)wafers,and the related interfacial properties were investigated by high-resolution X-ray photoelectron spectroscopy(XPS)and first-principles calculations.Using t...Two-dimensional(2D)WS_(2)films were deposited on SiO_(2)wafers,and the related interfacial properties were investigated by high-resolution X-ray photoelectron spectroscopy(XPS)and first-principles calculations.Using the direct(indirect)method,the valence band offset(VBO)at monolayer WS_(2)/SiO_(2)interface was found to be 3.97 eV(3.86 eV),and the conduction band offset(CBO)was 2.70 eV(2.81 eV).Furthermore,the VBO(CBO)at bulk WS_(2)/SiO_(2)interface is found to be about 0.48 eV(0.33 eV)larger due to the interlayer orbital coupling and splitting of valence and conduction band edges.Therefore,the WS_(2)/SiO_(2)heterostructure has a Type I energy-band alignment.The band offsets obtained experimentally and theoretically are consistent except the narrower theoretical bandgap of SiO_(2).The theoretical calculations further reveal a binding energy of 75 meV per S atom and the totally separated partial density of states,indicating a weak interaction and negligible Fermi level pinning effect between WS_(2)monolayer and SiO_(2)surface.Our combined experimental and theoretical results provide proof of the sufficient VBOs and CBOs and weak interaction in 2D WS_(2)/SiO_(2)heterostructures.展开更多
Selective oxidation of Fe-Mn alloys was characterizied through X-ray photoelectron spectroscopy and scanning/transmission electron microscopy during industrial continuous annealing(in an atmosphere of N_(2)-5 vol.%H_(...Selective oxidation of Fe-Mn alloys was characterizied through X-ray photoelectron spectroscopy and scanning/transmission electron microscopy during industrial continuous annealing(in an atmosphere of N_(2)-5 vol.%H_(2) with traces of water at 800℃).After annealing,only MnO oxides are formed on and below the surface and few iron oxides appear on the top surface due to oxidation of ambient air or the formation of FeO-MnO solid solutions.Mn concentration profiles exhibit typical selective oxidation and show similar features.Mn concentration first increases to a peak value at a depth of 5-10 nm from surface,and then decreases to the minimum at the oxidation front,following with a floating up and down to bulk composition.According to XPS spectra and Mn concentration profiles as a function of depth,the annealed alloy surfaces can be divided into four zones:ambient air contaminated zone,MnO enrichment zone(external and internal oxidation coexisting here),Mn depletion zone and bulk composition zone.Mn concentration reaches a minimum value at the oxidation front,whose position is deeper with annealing temperature and time increasing.The value of Mn diffusion coefficient in ferrite estimated using diffusion flux at the oxidation front is 2.9×10^(-15)m^(2)s^(-1) at 800℃,which is slightly greater than that in literature.展开更多
基金Advanced Light Source,which is a DOE Office of Science User Facility under contract no.DE-AC02-05CH11231the Basque Government for funding through a PhD Fellowship(Grant no.PRE_2018_2_0285)+1 种基金through Egonlabur Travel Fellowship(Grant no.EP_2018_1_0004)partially supported by an Early Career Award in the Condensed Phase and Interfacial Molecular Science Program,in the Chemical Sciences Geosciences and Biosciences Division of the Office of Basic Energy Sciences of the U.S.Department of Energy under Contract No.DE-AC02-05CH11231.
文摘The development of an analytical method for determining the properties of quantum dots(QDs)is crucial for improving the optical performance of QD-based displays.Therefore,synchrotron-based X-ray photoelectron spectroscopy(XPS)is designed here to accurately characterize the chemical and structural differences between different QDs.This method enables the determination of the reason for the minimal differences between the optical properties of different QDs depending on the synthesis process,which is difficult to determine using conventional methods alone.Combined with model simulations,the XPS spectra obtained at different photon energies reveal the internal structures and chemical-state distributions of the QDs.In particular,the QD synthesized under optimal conditions demonstrates a relatively lower degree of oxidation of the core and more uniformly stacked ZnSe/ZnS shell layers.The internal structures and chemical-state distributions of QDs are closely related to their optical properties.Finally,the synchrotron-based XPS proposed here can be applied to compare nearly equivalent QDs with slightly different optical properties.
文摘Electrocatalysis is key to improving energy efficiency,reducing carbon emissions,and providing a sustainable way of meeting global energy needs.Therefore,elucidating electrochemical reaction mechanisms at the electrolyte/electrode interfaces is essential for developing advanced renewable energy technologies.However,the direct probing of real-time interfacial changes,i.e.,the surface intermediates,chemical environment,and electronic structure,under operating conditions is challenging and necessitates the use of in situ methods.Herein,we present a new lab-based instrument commissioned to perform in situ chemical analysis at liquid/solid interfaces using ambient pressure X-ray photoelectron spectroscopy(APXPS).This setup takes advantage of a chromium source of tender X-rays and is designed to study liquid/solid interfaces by the“dip and pull”method.Each of the main components was carefully described,and the results of performance tests are presented.Using a three-electrode setup,the system can probe the intermediate species and potential shifts across the liquid electrolyte/solid electrode interface.In addition,we demonstrate how this system allows the study of interfacial changes at gas/solid interfaces using a case study:a sodium–oxygen model battery.However,the use of APXPS in electrochemical studies is still in the early stages,so we summarize the current challenges and some developmental frontiers.Despite the challenges,we expect that joint efforts to improve instruments and the electrochemical setup will enable us to obtain a better understanding of the composition–reactivity relationship at electrochemical interfaces under realistic reaction conditions.
基金supported by the National Natural Science Foundation of China(Grant No.50972144)
文摘Silicon nanopillars are fabricated by inductively coupled plasma （ICP） dry etching with the cesium chloride （CsCl） islands as masks originally from self-assembly. Wafers with nanopillar texture or planar surface are subjected to phosphorus （P） diffusion by liquid dopant source （POCl3） at 870 ℃ to form P-N junctions with a depth of 300 nm. The X-ray photoelectron spectroscopy （XPS） is used to measure the Si 2p core levels of P-N junction wafer with nanopillar texture and planar surface. With a visible light excitation, the P-N junction produces a new electric potential for photoelectric characteristic, which causes the Si 2p core level to have a energy shift compared with the spectrum without the visible light. The energy shift of the Si 2p core level is -0.27 eV for the planar P-N junction and -0.18 eV for the nanopillar one. The difference in Si 2p energy shift is due to more space lattice defects and chemical bond breaks for nanopillar compared with the planar one.
基金Project supported by the National Natural Science Foundation of China (Grant No 102750770)
文摘This paper reports how pyrite films were prepared by thermal sulfurization of magnetron sputtered iron films and characterized by X-ray absorption near edge structure spectra and X-ray photoelectron spectroscopy on a 4B9B beam line at the Beijing Synchrotron Radiation Facility. The band gap of the pyrite agrees well with the optical band gap obtained by a spectrophotometer. The octahedral symmetry of pyrite leads to the splitting of the d orbit into t2g and eg levels. The high spin and low spin states were analysed through the difference of electron exchange interaction and the orbital crystal field. Only when the crystal field splitting is higher than 1.5 eV, the two weak peaks above the white lines can appear, and this was approved by experiments in the present work.
基金This work was supported by the National Natural Science Foundation of China under grant No.10474074the Hubei Natural Science Foundation under grant No.2001ABB060.
文摘TixAl1-xN films have been prepared by RF reactive magnetron sputtering. X-ray diffraction results showed that TixAl1-xN thin films in this study were hexagonal wurtzite structure with the Ti content up to 0.18. X-ray photoelectron spectrocopy studies provided that the Nls core-electron spectrum of TixAl1-xN thin film brodend with increasing Ti content, and the difference of the chemical shifts for Ti2p3/2 line between TiN and TixAl1-xN th77pj in film was 0.7 eV.
基金the financial support from the National Natural Science Foundation of China(No.12174057,22179020)Natural Science Foundation of Fujian Province(Grant No.2021L3011).
文摘Understanding the evolution of the solid electrolyte-electrode interface is currently one of the most challenging obstacles in the development of solid-state batteries(SSBs).Here,we develop an X-ray Photoelectron Spectroscopy(XPS)that allows for operando measurement during cycling.Based on theoretical analysis and the modulated electrode and detector co-grounding mode,the displacement of binding energy can be correlated with the surface electrostatic potential of the material,revealing the charge distribution and composition evolution of the space charge layer between the cathode and the electrolyte.In the investigation of typical LiCoO_(2)(LCO)/Li6PS5Cl(LPSC)/Li-In batteries,we observed the static potential difference and oxidative decomposition between LPSC and LCO,and the effectiveness of the LiNbO3 coating in reducing potential difference and inhibiting the diffusion of Co and oxidation of S species.Furthermore,our study also revealed that the potential drop between LiNi0⋅8Co0⋅1Mn0⋅1O_(2) and LPSC is smaller than that of LCO,whilst that between Li3InCl6 and LCO remains near zero.The proposed operando XPS method offers a novel approach for real-time monitoring of interface potential and species formation,providing rational guidance for the interface engineering in SSBs.
基金supported by the National Natural Science Foundation of China (Nos.50871014, 50831002, 50971021, and 50901007)the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality (No.PHR201007122)
文摘Different monolayers （ML） of Fe atoms were deposited on NiO （001） substrates or NiO underlayers using molecular beam epitaxy （MBE）, pulse laser deposition （PLD）, and magnetron sputtering （MS）. The magnetic properties and microstructure of the films were studied. The apparent magnetic dead layer （MDL） is found to exist at the NiO/Fe interfaces of the MBE sample （about 2 ML MDL）, the PLD sample （about 3 ML MDL）, and the MS sample （about 4 ML MDL）. X-ray photoelectron spectroscopy indicates the presence of ionic Fe （Fe2＋ or Fe3＋） and metallic Ni at the NiO/Fe interfaces, which may be due to the chemical reactions between Fe and NiO layers. This also leads to the formation of MDL. The thickness of the MDL and the reaction products are related with the deposition energy of the atoms on the substrates. The interfacial reactions are effectively suppressed by inserting a thin Pt layer at the NiO/Fe interface.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11874242,11804196,and 11804197)
文摘The chemisorbed structure for an aromatic molecule on a silicon surface plays an important part in promoting the development of organic semiconductor material science. The carbon K-shell x-ray photoelectron spectroscopy（XPS） and the x-ray absorption near-edge structure（XANES） spectra of the interfacial structure of an s-triazine molecule adsorbed on Si（100） surface have been performed by the first principles, and the landscape of the s-triazine molecule on Si（100） surface has been described in detail. Both the XPS and XANES spectra have shown their dependence on different structures for the pristine s-triazine molecule and its several possible adsorbed configurations. By comparison with the XPS spectra, the XANES spectra display the strongest structural dependency of all of the studied systems and thus could be well applied to identify the chemisorbed s-triazine derivatives. The exploration of spectral components originated from non-equivalent carbons in disparate local environments has also been implemented for both the XPS and XANES spectra of s-triazine adsorbed configurations.
基金financial supports from the National Natural Science Foundation of China(Grant no.91645102 and 22002031)the Singapore National Research Foundation under the grant of NRF2017NRF-NSFC001-007the NUS Flagship Green Energy Programme。
文摘ZnO-based catalysts have been intensively studied because of their extraordinary performance in lower olefin synthesis,methanol synthesis and water-gas shift reactions.However,how ZnO catalyzes these reactions are still not well understood.Herein,we investigate the activations of CO_(2),O_(2)and CO on single crystalline ZnO polar surfaces at room temperature,through in-situ near-ambient-pressure X-ray photoelectron spectroscopy(NAP-XPS).It is revealed that O_(2)and CO_(2)can undergo chemisorption on ZnO polar surfaces at elevated pressures.On the ZnO(0001)surface,molecular CO_(2)(O_(2))can chemically interact with the top layer Zn atoms,leading to the formation of CO_(2)^(δ-)(O_(2)^(δ-))or partially dissociative atomic oxygen(O-)and hence the electron depletion layer in ZnO.Therefore,an apparent upward band-bending in ZnO(0001)is observed under the CO_(2)and O_(2)exposure.On the ZnO(0001)surface,the molecular chemisorbed CO_(2)(O_(2))mainly bond to the surface oxygen vacancies,which also results in an upward bandbending in ZnO(0001).In contrast,no band-bending is observed for both ZnO polar surfaces upon CO exposure.The electron-acceptor nature of the surface bounded molecules/atoms is responsible for the reversible binding energy shift of Zn 2 p_(3/2)and O 1 s in ZnO.Our findings can shed light on the fundamental understandings of CO_(2)and O_(2)activation on ZnO surfaces,especially the role of ZnO in heterogeneous catalytic reactions.
基金Project supported by the National Natural Science Foundation of China(Grant No.61774172)the Guangdong Provincial Department of Science and Technology,China(Grant Nos.2019B010132002 and 2016B090918106)+1 种基金the Pengcheng Scholar Funding(2018)Shenzhen Science and Technology Innovation Committee,China(Grant No.KQJSCX20180323174713505).
文摘Theε-Ga2O3 p-n heterojunctions(HJ)have been demonstrated using typical p-type oxide semiconductors(NiO or SnO).Theε-Ga2O3 thin film was heteroepitaxial grown by metal organic chemical vapor deposition(MOCVD)with three-step growth method.The polycrystalline SnO and NiO thin films were deposited on theε-Ga2O3 thin film by electron-beam evaporation and thermal oxidation,respectively.The valence band offsets(VBO)were determined by x-ray photoelectron spectroscopy(XPS)to be 2.17 eV at SnO/ε-Ga2O3 and 1.7 eV at NiO/ε-Ga2O3.Considering the bandgaps determined by ultraviolet-visible spectroscopy,the conduction band offsets(CBO)of 0.11 eV at SnO/ε-Ga2O3 and 0.44 eV at NiO/ε-Ga2O3 were obtained.The type-Ⅱband diagrams have been drawn for both p-n HJs.The results are useful to understand the electronic structures at theε-Ga2O3 p-n HJ interface,and design optoelectronic devices based onε-Ga2O3 with novel functionality and improved performance.
基金Supported by the Project of Returned Overseas of Harbin Science and Technology Bureau(RC2010LX002005)the Project of Science and Technology Department of Heilongjiang Province(LC07C27)~~
文摘[Objective] The aim was to improve the adhesive bonding property of wheat straw surface to prepare wheat straw particleboard of soy protein isolate （SPI） adhesive through chemical and enzyme treatments. [Method] Evaluation and analysis were made on wettability of wheat straws in the control group and treated groups （chemical and enzyme treatments） by means of measurement of contact angle and calculation of spreading-penetration parameters （K）. In addition, we made analysis on surface elements through X-ray photoelectron spectroscopy （XPS）. [Result] The re- sults showed that K value of straw treated with sodium hydroxide, hydrogen peroxide and lipase increased by 58.0%, 48.7% and 83.2% compared to that of control group, respectively. The XPS analysis indicated that rapid decrease of silicon content and destruction of wax layer greatly contributed to wettability improvement of wheat straw surface. [Conclusion] The chemical and lipase treatments of wheat straw provided technical support for manufacture of wheat straw particle boand.
文摘NdCl 3 FeCl 3 graphite intercalation compounds were synthesized by molten salt exchange method. The state of the intercalates and the relative contents of Nd, Fe, Cl, C in the product were determined by X ray photoelectron spectroscopy(XPS). From the XPS data, it is concluded that the binding energy of Fe2p electrons is about 711 20～710 3 eV, the binding energy of Nd3d electrons is about 983 08～983 20 eV, and Fe in the product has two valence states (Fe 3+ and Fe 2+ ).
基金Project supported by the National Natural Science Foundation of China(Grant No.11404302)the Laser Fusion Research Center Funds for Young Talents,China(Grant No.RCFPD1-2017-9)
文摘With the increasing interest in Cu2O-based devices for photovoltaic applications,the energy band alignment at the Cu2O/ZnO heterojunction has received more and more attention.In this work,a high-quality Cu2O/ZnO heterojunction is fabricated on a c-Al2 O3 substrate by laser-molecular beam epitaxy,and the energy band alignment is determined by x-ray photoelectron spectroscopy.The valence band of ZnO is found to be 1.97 eV below that of Cu2O.A type-II band alignment exists at the Cu2O/ZnO heterojunction with a resulting conduction band offset of 0.77 eV,which is especially favorable for enhancing the efficiency of Cu2O/ZnO solar cells.
基金This work was supported partially by Japan International Cooperation Agency(JICA)Conselho Nacional de Desenvolviment Científico e Tecnológico(CNPq)Coordenacao de Aperfeicoamento de Pessoal de Nível Superior(CAPES).
文摘Thin carbon nitride (CNx) films were synthesized on silicon substrates by reactive RF magnetron sputtering of a graphite target in mixed N2/Ar discharges and the N2 gas fraction in the discharge gas, F N, varied from 0.5 to 1.0. The atomic bonding configuration and chemical composition in the CNx films were examined using X-ray photoelectron spectroscopy (XPS) and the degree of structural disorder was studied using Raman spectroscopy. An increase in the nitrogen content in the film from 19 to 26 at% was observed at FN = 0.8 and found to influence the film properties;normality tests suggested that the data obtained at FN = 0.8 are not experimental errors. The interpretation of XPS spectra might not be always straightforward and hence the detailed and quantitative comparison of the XPS data with the information acquired by Raman spectroscopy enabled us to interpret the decomposed peaks in the N 1s and C 1s XPS spectra. Two N 1s XPS peaks at 398.3 and 399.8 eV (peaks N1 and N2, respectively) were assigned to a sum of pyridine-like nitrogen and -C≡N bond, and to a sum of pyrrole-like nitrogen and threefold nitrogen, respectively. Further, the peaks N1 and N2 were found to correlate with C 1s XPS peaks at 288.2 and 286.3 eV, respectively;the peak at 288.2 eV might include a contribution of sp3 carbon.
基金supported by the Vinnova(project number 2020-03778)supported by the Swedish Research Council(Vetenskapsradet,project number 2021-04157).
文摘Nano-scale chemical inhomogeneity in surface oxide films formed on a V-and N-containing martensite stainless steel and tempering heating induced changes are investigated by a combination of synchrotron-based hard X-ray Photoelectron emission spectroscopy(HAXPES)and microscopy(HAXPEEM)as well as microscopic X-ray absorption spectroscopy(μ-XAS)techniques.The results reveal the inhomogeneity in the oxide films on the micron-sized Cr_(2)N-and VN-type particles,while the inhomogeneity on the martensite matrix phase exists due to localised formation of nano-sized tempering nitride particles at 600℃.The oxide film formed on Cr_(2)N-type particles is rich in Cr_(2)O_(3) compared with that on the martensite matrix and VN-type particles.With the increase of tempering temperature,Cr_(2)O_(3) formation is faster for the oxidation of Cr in the martensite matrix than the oxidation of Cr nitride-rich particles.
基金This work was supported by the National Natural Science Foundation of China(Grant No.40601004).
文摘This research investigates the adsorptionmechanisms of fluoride(F)on four clay minerals(kaolinite,montmorillonite,chlorite,and illite)underdifferent F^(-)concentrations and reaction times by probingtheir fluoride superficial layer binding energies and elementcompositions using X-ray photoelectron spectroscopy(XPS).At high F^(-)concentrations(C_(0)=5-1000 mg·L^(-1)),the amount of F^(-)adsorbed(Q_(F)),amount of hydroxidereleased by clay minerals,solution F^(-)concentration,andthe pH increase with increasing C_(0).The increases areremarkable at C_(0)>50 mg·L^(-1).The QF increases significantlyby continuously modifying the pH level.At C_(0)<5-100 mg·L^(-1),clay minerals adsorb H+to protonatealuminum-bound surface-active hydroxyl sites in thesuperficial layers and induce F^(-)binding.As the C_(0)increases,F^(-),along with other cations,is adsorbed toform a quasi-cryolite structure.At C_(0)>100 mg·L^(-1),newminerals precipitate and the product depends on the criticalAl^(3+)concentration.At[Al^(3+)]>10^(-11.94)mol·L^(-1),cryoliteforms,while at[Al^(3+)]<10^(-11.94)mol·L^(-1),AlF_(3)is formed.At low C_(0)(0.3-1.5 mg·L^(-1)),proton transfer occurs,andthe F^(-)adsorption capabilities of the clay minerals increasewith time.
基金This work was supported by the National Natural Science Foundation of China(Grant No.11804115)the Foundation from Department of Science and Technology of Fujian Province(Grant Nos.2019L3008,2020J01704,2021J01863,and 2021J05171)+1 种基金the Foundation from Department of Education of Fujian Province(Grant No.JT180261)the Scientific Research Foundation from Jimei University(Grant Nos.ZC2018007,ZQ2019008,ZP2020066,and ZP2020065).
文摘Two-dimensional(2D)WS_(2)films were deposited on SiO_(2)wafers,and the related interfacial properties were investigated by high-resolution X-ray photoelectron spectroscopy(XPS)and first-principles calculations.Using the direct(indirect)method,the valence band offset(VBO)at monolayer WS_(2)/SiO_(2)interface was found to be 3.97 eV(3.86 eV),and the conduction band offset(CBO)was 2.70 eV(2.81 eV).Furthermore,the VBO(CBO)at bulk WS_(2)/SiO_(2)interface is found to be about 0.48 eV(0.33 eV)larger due to the interlayer orbital coupling and splitting of valence and conduction band edges.Therefore,the WS_(2)/SiO_(2)heterostructure has a Type I energy-band alignment.The band offsets obtained experimentally and theoretically are consistent except the narrower theoretical bandgap of SiO_(2).The theoretical calculations further reveal a binding energy of 75 meV per S atom and the totally separated partial density of states,indicating a weak interaction and negligible Fermi level pinning effect between WS_(2)monolayer and SiO_(2)surface.Our combined experimental and theoretical results provide proof of the sufficient VBOs and CBOs and weak interaction in 2D WS_(2)/SiO_(2)heterostructures.
基金financially supported by the French"Agence Nationale de la Recherche"through the"Investissements d'avenir"Program(No.ANR-10-EQPX-37 MATMECA)the Chinese"International Exchange Program"(No.YJ20210129)the Shuimu Tsinghua Scholar Program(No.2020SM100)
文摘Selective oxidation of Fe-Mn alloys was characterizied through X-ray photoelectron spectroscopy and scanning/transmission electron microscopy during industrial continuous annealing(in an atmosphere of N_(2)-5 vol.%H_(2) with traces of water at 800℃).After annealing,only MnO oxides are formed on and below the surface and few iron oxides appear on the top surface due to oxidation of ambient air or the formation of FeO-MnO solid solutions.Mn concentration profiles exhibit typical selective oxidation and show similar features.Mn concentration first increases to a peak value at a depth of 5-10 nm from surface,and then decreases to the minimum at the oxidation front,following with a floating up and down to bulk composition.According to XPS spectra and Mn concentration profiles as a function of depth,the annealed alloy surfaces can be divided into four zones:ambient air contaminated zone,MnO enrichment zone(external and internal oxidation coexisting here),Mn depletion zone and bulk composition zone.Mn concentration reaches a minimum value at the oxidation front,whose position is deeper with annealing temperature and time increasing.The value of Mn diffusion coefficient in ferrite estimated using diffusion flux at the oxidation front is 2.9×10^(-15)m^(2)s^(-1) at 800℃,which is slightly greater than that in literature.
