[Objeetive] We aimed to calculate the flow of controlling units in a small watershed based on GIS technology. [Method] Hydrologic analysis on Qingyi River was conducted by using ArcGIS9.0, and the controlling units wi...[Objeetive] We aimed to calculate the flow of controlling units in a small watershed based on GIS technology. [Method] Hydrologic analysis on Qingyi River was conducted by using ArcGIS9.0, and the controlling units with response of water-land were divided according to the riv- er monitoring sections of Xuchang City; considering the wastewater entering the river and the water from its upper reach, the runoff of controlling sections in the driest month （ with guarantee rate of 90% ） was calculated by means of isoline, runoff coefficient and hydrologic analogy method, and the calculated value of Gaocun Bridge section in Linying was contrasted with the measured value in 2010. [Result] The results showed that the cal- culated value and measured value of Gaecun Bridge section in Linying in the driest month of 2010 were 6.03 and 5.93 m^3/s respectively, with relative error of 1.69%, which revealed that the result of calculated runoff was reasonable. [ Conclusion] The way to divide controlling units was reason- able, and the calculation result of runoff was accurate and can meet the precision of water environment capacity calculation.展开更多
The aridity, population growth, agriculture and industrial activities threaten the water resources in the United Arab Emirates (UAE). In UAE, groundwater quantity is reduced and its quality is also deteriorated due to...The aridity, population growth, agriculture and industrial activities threaten the water resources in the United Arab Emirates (UAE). In UAE, groundwater quantity is reduced and its quality is also deteriorated due to the scanty of rainfall and over pumping for different uses. The deficit of groundwater is met by desalinated water and reused of treated wastewater. Agricultural activities have negative impacts on water resources and this causes reduction of groundwater quality as the agriculture the main land use in the UAE and it accounts for more than 70% of groundwater use. The treated wastewater is an alternative source for agricultural activities. To improve the current water situation, a national water resources strategy has been prepared and imple-mented to assist in achieve this target and maintain the country’s water security. This paper intends to give an overview of water resources in the UAE with emphasis on challenges facing the management of these resources.展开更多
The purpose of this study is to investigate the effect of using Bicarbonate and Calcium parameters as alternatives to the lithostratigraphic units covered the catchment area, on water quality index (WQI) values that h...The purpose of this study is to investigate the effect of using Bicarbonate and Calcium parameters as alternatives to the lithostratigraphic units covered the catchment area, on water quality index (WQI) values that have been implemented with GIS technique at Wadi Al-Arab Dam. The analyzed results (by WQI method) have been used to depict water quality for the two approaches. Based on physico-chemical parameters, the calculated values for WQI over the 3-year for study period were 169, 168, and 157, respectively. While the WQI values were 184, 183 and 172, respectively, as a result of incorporated Bicarbonate and Calcium parameters in WQI calculations that significantly contributed to increasing the WQI. The elevated values may be attributed to the influence of carbonate stone dissolution and mechanical erosion under weathering conditions that are prevalent during winter season in the catchment area. As a consequence of lithostratigraphic unites product and GIS technique integration and normalization processes, most of water quality ranks are good and only autumn season has poor water quality in the 2012 and 2013, while in 2014 it has good water quality in the same season. The WQI values increase in general trend from winter to autumn seasons during the study period that may be referred to outflow by daily consumption, evaporation rising, and seepage water. The analysis shows that the modified water quality values of the Wadi Al-Arab Dam Reservoir (WADR) vary after using Bicarbonate and Calcium parameters by constant value. Generally, the results signify that the WADR is not polluted based on the physical and chemical characteristics of water.展开更多
Water supply capability has been significantly reduced as water demand has been increased due to changes of the world's weather, causing the increase of drought frequency, and urbanization. In terms of water produ...Water supply capability has been significantly reduced as water demand has been increased due to changes of the world's weather, causing the increase of drought frequency, and urbanization. In terms of water production, water can be secured by construction a dam or procuring substitute water. However, the study approaches in terms of management of water supply area to control the existing water efficiently. Therefore, water demand was estimated by buildings, by which water load of micro water supply area was calculated. As a result, the deviation of water demand for 1,357 micro water supply areas could be calculated while the alternatives to dissolve the spatial demand unbalance were suggested by two types. From the study, firstly, we could anticipate the total water supply demand from the total sum by filtration plants but it was not possible to anticipate the characteristics of distribution within urban areas. For this, the study attempted to anticipate the demand of each 250 thousands of buildings, comprehending the demand of micro areas. Secondly, based on the built results, we suggest the directions to dissolve the water demand unbalance between and among regions, which could be the foundation to suggest the concrete methodology in the future.展开更多
The changes of structural and functional parameters of aquatic microbial communities in continuous water on campus of Tsinghua University, China are investigated by polyurethane foam unit(PFU) method. The measured com...The changes of structural and functional parameters of aquatic microbial communities in continuous water on campus of Tsinghua University, China are investigated by polyurethane foam unit(PFU) method. The measured compositions of the communities include alga, protozoa, and some metazoa(such as rotifers). The measured indicators of water quality include water temperature, pH value, dissolved oxygen(DO), potassium permanganate index(COD Mn ), total nitrogen(TN), total phosphorus(TP) and chlorophyll-a(Chla). The trophic level, expressed by the trophic level indices(TLIc), is assessed with analytic hierarchy process and principal component analysis(AHP-PCA) method. The changing trends of the structural and functional parameters of aquatic microbial communities, such as Margalef index of diversity(D), Shannon-weaver index of diversity (H), Heterotropy index(HI), number of species when the colonization gets equilibrium(S eq ), colonizing speed constant(G) and time spent when 90 percent of S eq colonized in PFU(T 90% ), are also analyzed. The experimental results showed the succession of aquatic microbial communities along the water flow is consistent with the water quality changes, so the parameters of microbial community can reflect the changes of water quality from the ecological view.展开更多
Nowadays, with regard to environmental issues, proper operation of wastewater treatment plants is of particular importance that in the case of inappropriate utilization, they will cause serious problems. Processes tha...Nowadays, with regard to environmental issues, proper operation of wastewater treatment plants is of particular importance that in the case of inappropriate utilization, they will cause serious problems. Processes that exist in environmental systems and environmental engineers are dealing with them mostly have two major characteristics: they are dependent on many variables;and there are complex relationships between its components which make them very difficult to analyze. Being familiar with characteristics of industrial town effluents from various wastewater treatment units, which have high qualitative and quantitative variations and more uncertainties compared to urban wastewaters, plays very effective role in governing them. In order to achieve a better and efficient control over the operation of an industrial wastewater treatment plant, powerful mathematical tool can be used that is based on recorded data from some basic parameters of wastewater during a period of treatment plant operation. In this study, the multilayer perceptron (MLP) feed forward neural network with a hidden layer and stop training method was used to predict quality parameters of the industrial effluent. Data of this study are related to the Fajr Industrial Wastewater Treatment Plant located in Mahshahr—Iran that qualitative and quantitative characteristics of its units were used for training, calibration and evaluation of the neural model. Also, Principal Component Analysis technique was applied to modify and improve performance of generated models of neural networks. The results of this model showed good accuracy of the model in estimating qualitative pro- file of wastewater. This model facilitates evaluating the performance of each treatment plant units through comparing the results of prediction model with the standard amount of output.展开更多
The upper Ming section of L oilfield is a typical offshore heavy oil bottom-water reservoir with thick fluvial layers. All horizontal wells are developed by natural energy. Due to the few drilling holes and influence ...The upper Ming section of L oilfield is a typical offshore heavy oil bottom-water reservoir with thick fluvial layers. All horizontal wells are developed by natural energy. Due to the few drilling holes and influence by the resolution of seismic data, it is difficult to describe reservoirs with thickness over 20 meters. In this paper, seismic resonance amplitude inversion technology is introduced to restore the real response of thick reservoirs and interbeds by drilling and drilling verification, and the geological bodies with different thickness are displayed by frequency division RGB three primary colors. Flow units of heavy oil reservoirs with bottom water are divided according to the three major factors of interlayer, lithologic internal boundary and water-oil thickness ratio which have the greatest influence on horizontal well development, thick sand bodies are divided into 10 different flow units in three levels, each unit is separated from each other, and the reservoir structure, water-cut characteristics and water-flooding characteristics are different. The reliability of the research is improved by using the dynamic data of horizontal wells and newly drilled passing wells, which provides a basis for tapping the potential of heavy oil reservoirs with bottom water.展开更多
This study is aimed to assess and evaluate the suitability of groundwater of the area located to the south-east of Al-Ain area in the UAE using hydrogeochemcical approach. The chemical analyses of groundwater samples ...This study is aimed to assess and evaluate the suitability of groundwater of the area located to the south-east of Al-Ain area in the UAE using hydrogeochemcical approach. The chemical analyses of groundwater samples collected from the study area showed that the groundwater salinity is high which resulted from heavy groundwater pumping. High chloride concentrations in groundwater of Mubazarah and Neima might be attributed to the entrapped saline water within the limestone sequence of Jabal Hafit, or it can be the agricultural activities as it clear from the positive relationship between Cl- and Br-. High sulphate concentrations in groundwater might be related to the presence of gypsum and anhydrite within the limestone sequence of Jabal Hafit. The anionic and cationic compositions of groundwater indicate that the chloride and sodium ions are the dominant and presence of bicarbonate and sulphate may reflect the mixing of such water by the recent freshwater through the existing structural lineaments within the study area. The hydrochemical parameters indicate a relative increase in the concentration of calcium, magnesium and sulphate ions and this could reflect the influence of carbonates and evaporite sediments.展开更多
With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing...With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.展开更多
文摘[Objeetive] We aimed to calculate the flow of controlling units in a small watershed based on GIS technology. [Method] Hydrologic analysis on Qingyi River was conducted by using ArcGIS9.0, and the controlling units with response of water-land were divided according to the riv- er monitoring sections of Xuchang City; considering the wastewater entering the river and the water from its upper reach, the runoff of controlling sections in the driest month （ with guarantee rate of 90% ） was calculated by means of isoline, runoff coefficient and hydrologic analogy method, and the calculated value of Gaocun Bridge section in Linying was contrasted with the measured value in 2010. [Result] The results showed that the cal- culated value and measured value of Gaecun Bridge section in Linying in the driest month of 2010 were 6.03 and 5.93 m^3/s respectively, with relative error of 1.69%, which revealed that the result of calculated runoff was reasonable. [ Conclusion] The way to divide controlling units was reason- able, and the calculation result of runoff was accurate and can meet the precision of water environment capacity calculation.
文摘The aridity, population growth, agriculture and industrial activities threaten the water resources in the United Arab Emirates (UAE). In UAE, groundwater quantity is reduced and its quality is also deteriorated due to the scanty of rainfall and over pumping for different uses. The deficit of groundwater is met by desalinated water and reused of treated wastewater. Agricultural activities have negative impacts on water resources and this causes reduction of groundwater quality as the agriculture the main land use in the UAE and it accounts for more than 70% of groundwater use. The treated wastewater is an alternative source for agricultural activities. To improve the current water situation, a national water resources strategy has been prepared and imple-mented to assist in achieve this target and maintain the country’s water security. This paper intends to give an overview of water resources in the UAE with emphasis on challenges facing the management of these resources.
文摘The purpose of this study is to investigate the effect of using Bicarbonate and Calcium parameters as alternatives to the lithostratigraphic units covered the catchment area, on water quality index (WQI) values that have been implemented with GIS technique at Wadi Al-Arab Dam. The analyzed results (by WQI method) have been used to depict water quality for the two approaches. Based on physico-chemical parameters, the calculated values for WQI over the 3-year for study period were 169, 168, and 157, respectively. While the WQI values were 184, 183 and 172, respectively, as a result of incorporated Bicarbonate and Calcium parameters in WQI calculations that significantly contributed to increasing the WQI. The elevated values may be attributed to the influence of carbonate stone dissolution and mechanical erosion under weathering conditions that are prevalent during winter season in the catchment area. As a consequence of lithostratigraphic unites product and GIS technique integration and normalization processes, most of water quality ranks are good and only autumn season has poor water quality in the 2012 and 2013, while in 2014 it has good water quality in the same season. The WQI values increase in general trend from winter to autumn seasons during the study period that may be referred to outflow by daily consumption, evaporation rising, and seepage water. The analysis shows that the modified water quality values of the Wadi Al-Arab Dam Reservoir (WADR) vary after using Bicarbonate and Calcium parameters by constant value. Generally, the results signify that the WADR is not polluted based on the physical and chemical characteristics of water.
文摘Water supply capability has been significantly reduced as water demand has been increased due to changes of the world's weather, causing the increase of drought frequency, and urbanization. In terms of water production, water can be secured by construction a dam or procuring substitute water. However, the study approaches in terms of management of water supply area to control the existing water efficiently. Therefore, water demand was estimated by buildings, by which water load of micro water supply area was calculated. As a result, the deviation of water demand for 1,357 micro water supply areas could be calculated while the alternatives to dissolve the spatial demand unbalance were suggested by two types. From the study, firstly, we could anticipate the total water supply demand from the total sum by filtration plants but it was not possible to anticipate the characteristics of distribution within urban areas. For this, the study attempted to anticipate the demand of each 250 thousands of buildings, comprehending the demand of micro areas. Secondly, based on the built results, we suggest the directions to dissolve the water demand unbalance between and among regions, which could be the foundation to suggest the concrete methodology in the future.
文摘The changes of structural and functional parameters of aquatic microbial communities in continuous water on campus of Tsinghua University, China are investigated by polyurethane foam unit(PFU) method. The measured compositions of the communities include alga, protozoa, and some metazoa(such as rotifers). The measured indicators of water quality include water temperature, pH value, dissolved oxygen(DO), potassium permanganate index(COD Mn ), total nitrogen(TN), total phosphorus(TP) and chlorophyll-a(Chla). The trophic level, expressed by the trophic level indices(TLIc), is assessed with analytic hierarchy process and principal component analysis(AHP-PCA) method. The changing trends of the structural and functional parameters of aquatic microbial communities, such as Margalef index of diversity(D), Shannon-weaver index of diversity (H), Heterotropy index(HI), number of species when the colonization gets equilibrium(S eq ), colonizing speed constant(G) and time spent when 90 percent of S eq colonized in PFU(T 90% ), are also analyzed. The experimental results showed the succession of aquatic microbial communities along the water flow is consistent with the water quality changes, so the parameters of microbial community can reflect the changes of water quality from the ecological view.
文摘Nowadays, with regard to environmental issues, proper operation of wastewater treatment plants is of particular importance that in the case of inappropriate utilization, they will cause serious problems. Processes that exist in environmental systems and environmental engineers are dealing with them mostly have two major characteristics: they are dependent on many variables;and there are complex relationships between its components which make them very difficult to analyze. Being familiar with characteristics of industrial town effluents from various wastewater treatment units, which have high qualitative and quantitative variations and more uncertainties compared to urban wastewaters, plays very effective role in governing them. In order to achieve a better and efficient control over the operation of an industrial wastewater treatment plant, powerful mathematical tool can be used that is based on recorded data from some basic parameters of wastewater during a period of treatment plant operation. In this study, the multilayer perceptron (MLP) feed forward neural network with a hidden layer and stop training method was used to predict quality parameters of the industrial effluent. Data of this study are related to the Fajr Industrial Wastewater Treatment Plant located in Mahshahr—Iran that qualitative and quantitative characteristics of its units were used for training, calibration and evaluation of the neural model. Also, Principal Component Analysis technique was applied to modify and improve performance of generated models of neural networks. The results of this model showed good accuracy of the model in estimating qualitative pro- file of wastewater. This model facilitates evaluating the performance of each treatment plant units through comparing the results of prediction model with the standard amount of output.
文摘The upper Ming section of L oilfield is a typical offshore heavy oil bottom-water reservoir with thick fluvial layers. All horizontal wells are developed by natural energy. Due to the few drilling holes and influence by the resolution of seismic data, it is difficult to describe reservoirs with thickness over 20 meters. In this paper, seismic resonance amplitude inversion technology is introduced to restore the real response of thick reservoirs and interbeds by drilling and drilling verification, and the geological bodies with different thickness are displayed by frequency division RGB three primary colors. Flow units of heavy oil reservoirs with bottom water are divided according to the three major factors of interlayer, lithologic internal boundary and water-oil thickness ratio which have the greatest influence on horizontal well development, thick sand bodies are divided into 10 different flow units in three levels, each unit is separated from each other, and the reservoir structure, water-cut characteristics and water-flooding characteristics are different. The reliability of the research is improved by using the dynamic data of horizontal wells and newly drilled passing wells, which provides a basis for tapping the potential of heavy oil reservoirs with bottom water.
文摘This study is aimed to assess and evaluate the suitability of groundwater of the area located to the south-east of Al-Ain area in the UAE using hydrogeochemcical approach. The chemical analyses of groundwater samples collected from the study area showed that the groundwater salinity is high which resulted from heavy groundwater pumping. High chloride concentrations in groundwater of Mubazarah and Neima might be attributed to the entrapped saline water within the limestone sequence of Jabal Hafit, or it can be the agricultural activities as it clear from the positive relationship between Cl- and Br-. High sulphate concentrations in groundwater might be related to the presence of gypsum and anhydrite within the limestone sequence of Jabal Hafit. The anionic and cationic compositions of groundwater indicate that the chloride and sodium ions are the dominant and presence of bicarbonate and sulphate may reflect the mixing of such water by the recent freshwater through the existing structural lineaments within the study area. The hydrochemical parameters indicate a relative increase in the concentration of calcium, magnesium and sulphate ions and this could reflect the influence of carbonates and evaporite sediments.
基金supported by China National Science and Technology Major Project(2011ZX05009-004,2011ZX05014-003)National Key Basic Research and Development Program(973 Program),China(2011CB201006)Science Foundation of China University of Petroleum,Beijing(2462014YJRC053)
文摘With complex fractured-vuggy heterogeneous structures, water has to be injected to facilitate oil pro- duction. However, the effect of different water injection modes on oil recovery varies. The limitation of existing numerical simulation methods in representing fractured- vuggy carbonate reservoirs makes numerical simulation difficult to characterize the fluid flow in these reservoirs. In this paper, based on a geological example unit in the Tahe Oilfield, a three-dimensional physical model was designed and constructed to simulate fluid flow in a fractured-vuggy reservoir according to similarity criteria. The model was validated by simulating a bottom water drive reservoir, and then subsequent water injection modes were optimized. These were continuous （constant rate）, intermittent, and pulsed injection of water. Experimental results reveal that due to the unbalanced formation pressure caused by pulsed water injection, the swept volume was expanded and consequently the highest oil recovery increment was achieved. Similar to continuous water injection, intermit- tent injection was influenced by factors including the connectivity of the fractured-vuggy reservoir, well depth, and the injection-production relationship, which led to a relative low oil recovery. This study may provide a constructive guide to field production and for the devel- opment of the commercial numerical models specialized for fractured-vuggy carbonate reservoirs.
