W-type barium-nickel ferrite(BaNi_(2)Fe_(16)O_(27))is a highly promising material for electromagnetic wave(EMW)absorption be-cause of its magnetic loss capability for EMW,low cost,large-scale production potential,high...W-type barium-nickel ferrite(BaNi_(2)Fe_(16)O_(27))is a highly promising material for electromagnetic wave(EMW)absorption be-cause of its magnetic loss capability for EMW,low cost,large-scale production potential,high-temperature resistance,and excellent chemical stability.However,the poor dielectric loss of magnetic ferrites hampers their utilization,hindering enhancement in their EMW-absorption performance.Developing efficient strategies that improve the EMW-absorption performance of ferrite is highly desired but re-mains challenging.Here,an efficient strategy substituting Ba^(2+)with rare earth La^(3+)in W-type ferrite was proposed for the preparation of novel La-substituted ferrites(Ba_(1-x)LaxNi_(2)Fe_(15.4)O_(27)).The influences of La^(3+)substitution on ferrites’EMW-absorption performance and the dissipative mechanism toward EMW were systematically explored and discussed.La^(3+)efficiently induced lattice defects,enhanced defect-induced polarization,and slightly reduced the ferrites’bandgap,enhancing the dielectric properties of the ferrites.La^(3+)also enhanced the ferromagnetic resonance loss and strengthened magnetic properties.These effects considerably improved the EMW-absorption perform-ance of Ba_(1-x)LaxNi_(2)Fe_(15.4)O_(27)compared with pure W-type ferrites.When x=0.2,the best EMW-absorption performance was achieved with a minimum reflection loss of-55.6 dB and effective absorption bandwidth(EAB)of 3.44 GHz.展开更多
Er3+-substituted W-type barium ferrites Ba1-xErx(Zn0.3Co0.7)2Fe16O27 (x=0.00, 0.05, 0.10, 0.15, 0.20) were synthesized by polymer adsorbent combustion method. Samples were characterized by X-ray diffraction analysis (...Er3+-substituted W-type barium ferrites Ba1-xErx(Zn0.3Co0.7)2Fe16O27 (x=0.00, 0.05, 0.10, 0.15, 0.20) were synthesized by polymer adsorbent combustion method. Samples were characterized by X-ray diffraction analysis (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and network analyzer to investigate the relationships among Er3+ concentration, crystal structure, surface morphology and electromagnetic properties. All the XRD patterns showed pure phase of W-type barium ferrite when x≤0.15, while the impurity phase of ErFeO3 appeared when x=0.20. The pure W-type barium ferrite showed a hexagonal flake shape. In addition, the microwave electromagnetic properties of samples were analyzed in the frequency range of 2-18 GHz. It was indicated that the electromagnetic properties were significantly improved when Er3+ doping content was 0.10. The reasons were also discussed using electromagnetic theory. The optimized ferrite exhibited excellent microwave absorption performance. The maximum of reflection loss (RL) reached about-27.4 dB and RL was below-10 dB at the frequency range from 8.4 GHz to 18 GHz, when the thickness was 2.6 mm.展开更多
Saturation magnetization,magneto-crystalline anisotropy field,and dielectric properties are closely related to microwave devices applied at different frequencies.For regulating the magnetic and dielectric properties o...Saturation magnetization,magneto-crystalline anisotropy field,and dielectric properties are closely related to microwave devices applied at different frequencies.For regulating the magnetic and dielectric properties of W-type barium ferrites,single-phase BaMe_(2)Fe_(16)O_(27)(Me=Fe,Mn,Zn,Ni,Co) with different Me ions were synthesized by the high-temperature solid-state method.The saturation magnetization(Ms) range from 47.77 emu/g to 95.34 emu/g and the magnetic anisotropy field(H_a) range from 10700.60 Oe(1 Oe=79.5775 A·m^(-1)) to 13739.57 Oe,depending on the type of cation substitution in the hexagonal lattice.The dielectric permittivity and dielectric loss decrease with increasing frequency of the AC electric field in the low-frequency region,while they almost remain constant in the high-frequency region.The charac teristics of easy regulation and preparation make it a potential candidate for use in microwave device applications.展开更多
A scheme is proposed to generate the W-type entangled coherent states of three-cavity field. The scheme is based on the resonant atom-field interaction, thus the interaction time between the atom and the cavity is gre...A scheme is proposed to generate the W-type entangled coherent states of three-cavity field. The scheme is based on the resonant atom-field interaction, thus the interaction time between the atom and the cavity is greatly reduced, which is important in view of decoherence. Furthermore, the scheme does not need accurate adjustment of the interaction time.展开更多
MnZn-doped W-type barium cobalt ferrite powder composites of Ba(MnZn)xCo2(1-x)Fe16O27 (x = 0.1, 0.2, 0.3, 0.4, and 0.5) were prepared in a sol-gel process. The microwave absorbing properties of the composites in the r...MnZn-doped W-type barium cobalt ferrite powder composites of Ba(MnZn)xCo2(1-x)Fe16O27 (x = 0.1, 0.2, 0.3, 0.4, and 0.5) were prepared in a sol-gel process. The microwave absorbing properties of the composites in the range of 2 - 18 GHz and their electromagnetic loss mechanisms were studied. The results demonstrated that the synthesized Ba(MnZn)xCo2(1-x)Fe16O27 samples possess a W-type phase of the crystal structure with a hexagonal flaky shape in micro-morphology, and the samples exhibited a soft magnetic trait that enables improving their microwave absorption properties through suitable MnZn doping. For Ba(MnZn)0.4Co1.2Fe16O27 with a thickness of 2.8 mm, the reflection loss peak was -40.7 dB at a frequency of 7.3 GHz, with a bandwidth of 6.6 GHz at a loss of less than -10 dB. The microwave absorption primarily resulted from magnetic losses caused by magnetization relaxation, domain wall resonance, and natural resonance.展开更多
The radiant tube burner was modeled and analyzed by the numerical simulation method to investigate the influence factors and rules of NO_(x) emissions in a W-type radiant tube.These factors,which include air preheatin...The radiant tube burner was modeled and analyzed by the numerical simulation method to investigate the influence factors and rules of NO_(x) emissions in a W-type radiant tube.These factors,which include air preheating temperature,excess air coefficient,and fuel gas composition,were modified to study their effects on NO_(x) emissions under varying working conditions.Simulation results were compared with the theoretical calculation value based on chemical reaction equilibrium theory and the onsite experimental value to verify the simulation accuracy.The results show that NO_(x) emissions rise with increasing air preheating temperatures.NO_(x) production increases to an extreme value and then decreases during the oxygen-poor to oxygen-enriched process with the rise of the excess air coefficient.Enhancing the proportion of coke oven gas in the fuel gas raises the combustion temperature as well as the NO_(x) discharge.Both the thermal efficiency and NO_(x) emissions should be balanced.Therefore,the recommended values based on the simulation results are as follows:the air preheating temperature should not exceed 400℃,the excess air coefficient should be between 1.1 and 1.2,and the volume fraction of the coke oven gas should not exceed 30%.展开更多
Two generation schemes for Bell and W-type states of single-photon in cavity QED are proposed. The proposed schemes are simple and efficient in the sense that it requires no measurements on the particles.
基金financially supported by the National Key R&D Program of China(No.2021YFB3502500)the Natur-al Science Foundation of Shandong Province,China(No.2022HYYQ-014)+5 种基金the“20 Clauses about Colleges and Uni-versities(new)”(Independent Training of Innovation Team)Program of Jinan,China(No.2021GXRC036)the Provin-cial Key Research and Development Program of Shandong,China(No.2021ZLGX01)the National Natural Science Foundation of China(No.22375115)the Joint Laboratory project of Electromagnetic Structure Technology(No.637-2022-70-F-037)the Discipline Construction Expenditure for Distinguished Young Scholars of Shandong University,China(No.31370089963141)the Qilu Young Scholar Program of Shandong University,China(No.31370082163127).
文摘W-type barium-nickel ferrite(BaNi_(2)Fe_(16)O_(27))is a highly promising material for electromagnetic wave(EMW)absorption be-cause of its magnetic loss capability for EMW,low cost,large-scale production potential,high-temperature resistance,and excellent chemical stability.However,the poor dielectric loss of magnetic ferrites hampers their utilization,hindering enhancement in their EMW-absorption performance.Developing efficient strategies that improve the EMW-absorption performance of ferrite is highly desired but re-mains challenging.Here,an efficient strategy substituting Ba^(2+)with rare earth La^(3+)in W-type ferrite was proposed for the preparation of novel La-substituted ferrites(Ba_(1-x)LaxNi_(2)Fe_(15.4)O_(27)).The influences of La^(3+)substitution on ferrites’EMW-absorption performance and the dissipative mechanism toward EMW were systematically explored and discussed.La^(3+)efficiently induced lattice defects,enhanced defect-induced polarization,and slightly reduced the ferrites’bandgap,enhancing the dielectric properties of the ferrites.La^(3+)also enhanced the ferromagnetic resonance loss and strengthened magnetic properties.These effects considerably improved the EMW-absorption perform-ance of Ba_(1-x)LaxNi_(2)Fe_(15.4)O_(27)compared with pure W-type ferrites.When x=0.2,the best EMW-absorption performance was achieved with a minimum reflection loss of-55.6 dB and effective absorption bandwidth(EAB)of 3.44 GHz.
基金Project supported by the Advanced Project of The General Reserve Department of PLA (9140A××××6401)
文摘Er3+-substituted W-type barium ferrites Ba1-xErx(Zn0.3Co0.7)2Fe16O27 (x=0.00, 0.05, 0.10, 0.15, 0.20) were synthesized by polymer adsorbent combustion method. Samples were characterized by X-ray diffraction analysis (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and network analyzer to investigate the relationships among Er3+ concentration, crystal structure, surface morphology and electromagnetic properties. All the XRD patterns showed pure phase of W-type barium ferrite when x≤0.15, while the impurity phase of ErFeO3 appeared when x=0.20. The pure W-type barium ferrite showed a hexagonal flake shape. In addition, the microwave electromagnetic properties of samples were analyzed in the frequency range of 2-18 GHz. It was indicated that the electromagnetic properties were significantly improved when Er3+ doping content was 0.10. The reasons were also discussed using electromagnetic theory. The optimized ferrite exhibited excellent microwave absorption performance. The maximum of reflection loss (RL) reached about-27.4 dB and RL was below-10 dB at the frequency range from 8.4 GHz to 18 GHz, when the thickness was 2.6 mm.
基金Project supported by the National Natural Science Foundation of China (Grant No. 52088101)the Kunpeng Plan of Zhejiang ProvinceNingbo Top Talent Program。
文摘Saturation magnetization,magneto-crystalline anisotropy field,and dielectric properties are closely related to microwave devices applied at different frequencies.For regulating the magnetic and dielectric properties of W-type barium ferrites,single-phase BaMe_(2)Fe_(16)O_(27)(Me=Fe,Mn,Zn,Ni,Co) with different Me ions were synthesized by the high-temperature solid-state method.The saturation magnetization(Ms) range from 47.77 emu/g to 95.34 emu/g and the magnetic anisotropy field(H_a) range from 10700.60 Oe(1 Oe=79.5775 A·m^(-1)) to 13739.57 Oe,depending on the type of cation substitution in the hexagonal lattice.The dielectric permittivity and dielectric loss decrease with increasing frequency of the AC electric field in the low-frequency region,while they almost remain constant in the high-frequency region.The charac teristics of easy regulation and preparation make it a potential candidate for use in microwave device applications.
基金The project supported by the Natural Science Foundation of Education Committee of Fujian Province of China under Grant No. JB03047.
文摘A scheme is proposed to generate the W-type entangled coherent states of three-cavity field. The scheme is based on the resonant atom-field interaction, thus the interaction time between the atom and the cavity is greatly reduced, which is important in view of decoherence. Furthermore, the scheme does not need accurate adjustment of the interaction time.
文摘MnZn-doped W-type barium cobalt ferrite powder composites of Ba(MnZn)xCo2(1-x)Fe16O27 (x = 0.1, 0.2, 0.3, 0.4, and 0.5) were prepared in a sol-gel process. The microwave absorbing properties of the composites in the range of 2 - 18 GHz and their electromagnetic loss mechanisms were studied. The results demonstrated that the synthesized Ba(MnZn)xCo2(1-x)Fe16O27 samples possess a W-type phase of the crystal structure with a hexagonal flaky shape in micro-morphology, and the samples exhibited a soft magnetic trait that enables improving their microwave absorption properties through suitable MnZn doping. For Ba(MnZn)0.4Co1.2Fe16O27 with a thickness of 2.8 mm, the reflection loss peak was -40.7 dB at a frequency of 7.3 GHz, with a bandwidth of 6.6 GHz at a loss of less than -10 dB. The microwave absorption primarily resulted from magnetic losses caused by magnetization relaxation, domain wall resonance, and natural resonance.
文摘The radiant tube burner was modeled and analyzed by the numerical simulation method to investigate the influence factors and rules of NO_(x) emissions in a W-type radiant tube.These factors,which include air preheating temperature,excess air coefficient,and fuel gas composition,were modified to study their effects on NO_(x) emissions under varying working conditions.Simulation results were compared with the theoretical calculation value based on chemical reaction equilibrium theory and the onsite experimental value to verify the simulation accuracy.The results show that NO_(x) emissions rise with increasing air preheating temperatures.NO_(x) production increases to an extreme value and then decreases during the oxygen-poor to oxygen-enriched process with the rise of the excess air coefficient.Enhancing the proportion of coke oven gas in the fuel gas raises the combustion temperature as well as the NO_(x) discharge.Both the thermal efficiency and NO_(x) emissions should be balanced.Therefore,the recommended values based on the simulation results are as follows:the air preheating temperature should not exceed 400℃,the excess air coefficient should be between 1.1 and 1.2,and the volume fraction of the coke oven gas should not exceed 30%.
基金the National Natural Science Foundation of China (Grant No. 10774088)
文摘Two generation schemes for Bell and W-type states of single-photon in cavity QED are proposed. The proposed schemes are simple and efficient in the sense that it requires no measurements on the particles.
