In order to study mechanical stress on root from orthodontic tooth movement by sliding mechanics, a 3-dimensional finite element model incorporating all layers of a human mandibular dental arch with orthodontic applia...In order to study mechanical stress on root from orthodontic tooth movement by sliding mechanics, a 3-dimensional finite element model incorporating all layers of a human mandibular dental arch with orthodontic appliance has been developed to simulate mechanical stress on root from the orthodontic tooth movement. Simulated orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis was applied to the crown of the teeth. The finite element analysis showed when orthodontic forces were applied to the tooth, the stress was mainly concentrated at the neck of the tooth decreasing uniformly to the apex and crown. The highest stress on the root was 0.621 N/mm^2 for cervical margin of the canine, and 0.114 N/mm^2 for apical region of the canine. The top of canine crown showed the largest amount of displacement （2.417 μm）, while the lowest amount of displacement was located at the apical region of canine （0.043 μm）. In conclusion, this model might enable one to simulate orthodontic tooth movements clinically. Sliding force at 2 N is ideal to ensure the bodily orthodontic tooth movement. The highest stress concentration in the roots was always localized at the cervical margin when orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis, so there may be the same risk of root resorption when orthodontic force of 2 N at 0, 30 and 45 degree was used in clinic cases.展开更多
Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this devic...Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.展开更多
This study highlights the joint effect of early polymerization shrinkage and long-term moisture diffusion on the behavior of the restoration-tooth structure. The interphase debonding between particle and polymer resin...This study highlights the joint effect of early polymerization shrinkage and long-term moisture diffusion on the behavior of the restoration-tooth structure. The interphase debonding between particle and polymer resin in dental composite is taken into account by introducing the damage variable. The idealized model is designed and constructed for representing the restorationtooth structure, which consists of enamel, dentin, composite and interphase, each considered as homogenous material. The simulation is carried out using the general-purpose finite element software package, ABAQUS incorporated with a user subroutine for definition of damaged material behavior. The influence of Young's moduli of composite and interphase on stress and displacement is discussed. The compensating effect of water sorption on the polymerization shrinkage is examined with and without involving damage evolution. A comparison is made between the influence of hyper-, equi- and hypo-water sorption. Interfacial failure in the specific regions as well as cuspal movement has been predicated. The damage evolving in dental composite reduces the rigidity of composite, thus in turn reducing consequent stress and increasing consequent displacement. The development of stresses at the restoration-tooth interface can have a detrimental effect on the longevity of a restoration.展开更多
The paper presents the results of a thermo-mechanical analysis of the rolling two stepped shafts.One of the shafts has a toothed step with skew teeth,while the other has a worm winding in the shape of a trapezoidal sc...The paper presents the results of a thermo-mechanical analysis of the rolling two stepped shafts.One of the shafts has a toothed step with skew teeth,while the other has a worm winding in the shape of a trapezoidal screw.The shape of the rolling tools resembles that of the tools used in the Roto-Flo rolling method;yet unlike in Roto-Flo,the shafts are hot-rolled and no centres are used to stabilize the position of the workpiece during the forming process.For the calculations made with use of the DEFORM-3D process simulation system it has been assumed that the rolled shafts are made from 2618 aluminium alloy.As a result of the calculations made,it has been found that the toothed stepped shafts can be formed in one pass by means of the cross rolling process.Additionally,the temperature and strain distribution in the rolled product have been determined as well as some data concerning the forces which are necessary for the rolling process have been obtained.展开更多
The transmission characteristics of gear drive can be improved with the use of novel tooth profiles.A theoretical study on tooth profile of the hypocycloid pinwheel transmission and contact analysis of gear pair based...The transmission characteristics of gear drive can be improved with the use of novel tooth profiles.A theoretical study on tooth profile of the hypocycloid pinwheel transmission and contact analysis of gear pair based on finite element method(FEM) are carried out,respectively.The line contact between mated tooth surfaces becomes point contact according to a plus movement.Through loaded tooth contact analysis(LTCA),the contact stress and load distributions for the proposed hypocycloid pinwheel transmission and the traditional one are discussed.The analysis results show that the developed tooth surfaces have anticipatory point contact characteristics under loads and contact fatigue dangerous area locates around the ultimate contact position.展开更多
文摘In order to study mechanical stress on root from orthodontic tooth movement by sliding mechanics, a 3-dimensional finite element model incorporating all layers of a human mandibular dental arch with orthodontic appliance has been developed to simulate mechanical stress on root from the orthodontic tooth movement. Simulated orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis was applied to the crown of the teeth. The finite element analysis showed when orthodontic forces were applied to the tooth, the stress was mainly concentrated at the neck of the tooth decreasing uniformly to the apex and crown. The highest stress on the root was 0.621 N/mm^2 for cervical margin of the canine, and 0.114 N/mm^2 for apical region of the canine. The top of canine crown showed the largest amount of displacement （2.417 μm）, while the lowest amount of displacement was located at the apical region of canine （0.043 μm）. In conclusion, this model might enable one to simulate orthodontic tooth movements clinically. Sliding force at 2 N is ideal to ensure the bodily orthodontic tooth movement. The highest stress concentration in the roots was always localized at the cervical margin when orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis, so there may be the same risk of root resorption when orthodontic force of 2 N at 0, 30 and 45 degree was used in clinic cases.
文摘Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.
基金Project supported by the Research Grant Council of Hong Kong (No.PolyU5176/00E).
文摘This study highlights the joint effect of early polymerization shrinkage and long-term moisture diffusion on the behavior of the restoration-tooth structure. The interphase debonding between particle and polymer resin in dental composite is taken into account by introducing the damage variable. The idealized model is designed and constructed for representing the restorationtooth structure, which consists of enamel, dentin, composite and interphase, each considered as homogenous material. The simulation is carried out using the general-purpose finite element software package, ABAQUS incorporated with a user subroutine for definition of damaged material behavior. The influence of Young's moduli of composite and interphase on stress and displacement is discussed. The compensating effect of water sorption on the polymerization shrinkage is examined with and without involving damage evolution. A comparison is made between the influence of hyper-, equi- and hypo-water sorption. Interfacial failure in the specific regions as well as cuspal movement has been predicated. The damage evolving in dental composite reduces the rigidity of composite, thus in turn reducing consequent stress and increasing consequent displacement. The development of stresses at the restoration-tooth interface can have a detrimental effect on the longevity of a restoration.
基金the Structural Funds under the Innovative Economy Operational Programme (IE OP)financed from the European Regional Development Fund (No.POIG.0101.02-00-015/08)
文摘The paper presents the results of a thermo-mechanical analysis of the rolling two stepped shafts.One of the shafts has a toothed step with skew teeth,while the other has a worm winding in the shape of a trapezoidal screw.The shape of the rolling tools resembles that of the tools used in the Roto-Flo rolling method;yet unlike in Roto-Flo,the shafts are hot-rolled and no centres are used to stabilize the position of the workpiece during the forming process.For the calculations made with use of the DEFORM-3D process simulation system it has been assumed that the rolled shafts are made from 2618 aluminium alloy.As a result of the calculations made,it has been found that the toothed stepped shafts can be formed in one pass by means of the cross rolling process.Additionally,the temperature and strain distribution in the rolled product have been determined as well as some data concerning the forces which are necessary for the rolling process have been obtained.
基金National Natural Science Foundation of China(No.51205425)National Science&Technology Pillar Program during the 12th Five-Year Plan Period of China(No.2013BAF01B04)
文摘The transmission characteristics of gear drive can be improved with the use of novel tooth profiles.A theoretical study on tooth profile of the hypocycloid pinwheel transmission and contact analysis of gear pair based on finite element method(FEM) are carried out,respectively.The line contact between mated tooth surfaces becomes point contact according to a plus movement.Through loaded tooth contact analysis(LTCA),the contact stress and load distributions for the proposed hypocycloid pinwheel transmission and the traditional one are discussed.The analysis results show that the developed tooth surfaces have anticipatory point contact characteristics under loads and contact fatigue dangerous area locates around the ultimate contact position.
