期刊文献+
共找到1,643篇文章
< 1 2 83 >
每页显示 20 50 100
Separation occurring during the drop weight tear test of thick-walled X80 pipeline steels 被引量:3
1
作者 Qing-yun Sha Da-hang Li +1 位作者 Guo-jian Huang Ju Guan 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2013年第8期741-747,共7页
A separation phenomenon occurring during the drop weight tear test of commercial thick-walled API (American Petroleum Institute) X80 strip steel was investigated in this work. Microstructural analysis showed that th... A separation phenomenon occurring during the drop weight tear test of commercial thick-walled API (American Petroleum Institute) X80 strip steel was investigated in this work. Microstructural analysis showed that the band structure of bainite elongated along the rolling direction works as the initiation sites of separation. The propagation of separation can be promoted not only by the occurrence of the band structure of martensite/austenite constituent, prior austenite grain boundaries, and elongated bainite, but also by fine acicular ferrite and bainite. Wide separation formed in the former case, while the narrow one appeared in the latter case. acicular ferrite in thick-walled X80 pipeline steel in order Some methods were proposed to obtain fine and homogeneous to minimize the occurrence of separation. 展开更多
关键词 pipeline steel drop weight tear test SEPARATION cracking band structure
在线阅读 下载PDF
Association of hypoglycaemia in screening oral glucose tolerance test in pregnancy with low birth weight fetus 被引量:3
2
作者 Ananth U Nayak Arun M A Vijay +3 位作者 Radha Indusekhar Sushuma Kalidindi Venkata M Katreddy Lakshminarayanan Varadhan 《World Journal of Diabetes》 SCIE CAS 2019年第5期304-310,共7页
BACKGROUND Gestational diabetes mellitus(GDM) is a common metabolic derangement in pregnant women. In the women identified to be at high risk of GDM, a 75 g oral glucose tolerance test(OGTT) at 24-28 wk gestation is t... BACKGROUND Gestational diabetes mellitus(GDM) is a common metabolic derangement in pregnant women. In the women identified to be at high risk of GDM, a 75 g oral glucose tolerance test(OGTT) at 24-28 wk gestation is the recommended screening test in the United Kingdom as per National Institute for Health and Care Excellence(NICE). Hypoglycaemia following the glucose load is often encountered and the implication of this finding for the pregnancy, fetus and clinical care is unclear.AIM To determine the prevalence of hypoglycaemia at any time during the screening OGTT and explore its association with birth weight.METHODS All deliveries between 2009 and 2013 at the local maternity unit of the University hospital were reviewed. Of the total number of 24,154 women without preexisting diabetes, those who had an OGTT for GDM screening based on NICE recommended risk stratification, who had a singleton delivery and had complete clinical and demographic data for analysis, were included for this study(n =3537). Blood samples for fasting plasma glucose(FPG), 2-hour plasma glucose(2-h PG) and HbA1 c had been obtained. Birth weight was categorised as low(≤ 2500 g), normal or Macrosomia(≥ 4500 g) and blood glucose ≤ 3.5 mmol/L was used to define hypoglycaemia. Binary logistic regression was used to determine the association of various independent factors with dichotomized variables; the differences between frequencies/proportions by χ~2 test and comparison between group means was by one-way ANOVA.RESULTS Amongst the study cohort(3537 deliveries), 96(2.7%) women had babies with LBW(< 2500 g). Women who delivered a LBW baby had significantly lower FPG(4.3 ± 0.6 mmol/L, P = 0.001). The proportion of women who had a 2-h PG ≤ 3.5 mmol/L in the LBW cohort was significantly higher compared to the cohorts with normal and macrosomic babies(8.3% vs 2.8% vs 4.2%; P = 0.007). The factors which predicted LBW were FPG, Asian ethnicity and 2-h PG ≤ 3.5 mmol/L,whereas maternal age, 2-h PG ≥ 7.8 mmol/L and HbA1c were not significant predictors.CONCLUSION A low FPG and 2-h PG ≤ 3.5 mmol/L on 75-gram OGTT are significantly associated with low birth weight in women identified as high risk for GDM.Women of ethnic backgrounds(Asians) appear to be more susceptible to this increased risk and may serve as a separate cohort in whom we should offer more intensive follow up and screening for complications. Cost implications and resources for follow up would need to be looked at in further detail to support these findings. 展开更多
关键词 HYPOGLYCEMIA GLUCOSE tolerance test Low BIRTH weight PREGNANCY
暂未订购
Effect of dietary energy level on body weight, testicular development and semen quality of local barred chicken of the western highlands of Cameroon
3
作者 Cyrille D’Alex Tadondjou Ferdinand Ngoula +3 位作者 Ferdinand Ngoula Henry Fuelefack Defang Herve Kuietche Mube Alexis Teguia 《Advances in Reproductive Sciences》 2013年第3期38-43,共6页
This study was designed to examine the effects of dietary energy levels on some growth and reproductive parameters of local barred chickens in Cameroon. For this purpose, One hundred and forty four day-old barred male... This study was designed to examine the effects of dietary energy levels on some growth and reproductive parameters of local barred chickens in Cameroon. For this purpose, One hundred and forty four day-old barred male chicks, weighing 28.33 g in average were randomly divided into 12 groups of 12 chicks each. Three feeding programs (FP) comprising each a starter diet from day old to 12 weeks (S0: 2800 Kcal/Kg;S1: 2900 Kcal/Kg;S2: 3000 Kcal/Kg) and grower diet from 13 to 20 weeks (G0: 2900 Kcal/Kg;G1: 3000 Kcal/ Kg;G2: 3100 Kcal/Kg) were used and designated FP1, FP2 and FP3 respectively. Each of the FP was randomly allotted of 4 groups of 12 birds in a completely randomized design. Throughout experiment (1 day old to 20 weeks), body weight was recovered every 2 weeks. At 20 weeks of age, roosters were sacrificed;semen characteristic was analyzed and testes were characterized. Between 2 to 10 weeks old, body weight of cocks fed with FP3 was significantly higher (P < 0.05) as compared to others FP. Inversely, from 12 to 20 weeks, body weight of cocks receiving FP1 was significantly higher (P < 0.05) than that of cocks receiving feeding programs 2 and 3. At 20 weeks, 100% of cocks fed on FP3 produced semen versus 66.66% and 16.66% respectively for those on FP1 and FP2. Semen volume and mass motility of cocks fed on FP3 or FP1 were significantly (P < 0.05) higher than FP2. It was concluded that FP1 had more suitable dietary energy levels for growth and reproduction of local barred cocks. 展开更多
关键词 Energy Body weight testES SEMEN Puberty LOCAL Barred CHICKEN
暂未订购
Information Security Testing Model Based on Variable Weights Fuzzy Comprehensive Evaluation
4
作者 徐洋 谢晓尧 张焕国 《China Communications》 SCIE CSCD 2011年第4期76-83,共8页
Nowadays,clear evaluation models and methods are lacking in classified protection of information system,which our country is making efforts to promote.The quantitative evaluation of classified protection of informatio... Nowadays,clear evaluation models and methods are lacking in classified protection of information system,which our country is making efforts to promote.The quantitative evaluation of classified protection of information system security is studied.An indicators system of testing and evaluation is established.Furthermore,a model of unit testing and evaluation and a model of entirety testing and evaluation are presented respectively.With analytic hierarchy process and two-grade fuzzy comprehensive evaluation,the subjective and uncertain data of evaluation will be quantitatively analyzed by comprehensive evaluation.Particularly,the variable weight method is used to model entirety testing and evaluation.It can solve the problem that the weights need to be adjusted because of the relationship role which enhances or reduces security of information system.Finally,the paper demonstrates that the model testing and evaluation can be validly used to evaluate the information system by an example.The model proposed in this paper provides a new valuable way for classified protection of information system security. 展开更多
关键词 testing and evaluation for classified protection analytic hierarchy process variable weights fuzzy comprehensive evaluation
在线阅读 下载PDF
氯离子浓度对微损T91钢腐蚀性能的影响
5
作者 胡明磊 陈乐 +3 位作者 胡斌 罗强 文杰 魏光强 《包钢科技》 2026年第1期55-59,共5页
文章研究了不同氯离子(Cl^(-))浓度对经压入法处理的T91钢在中性盐雾环境中腐蚀行为的影响。采用10%和15%两种浓度的NaCl溶液,在标准中性盐雾试验条件下对压入试样进行了48~288 h的腐蚀试验。通过分析腐蚀失重、腐蚀形貌及腐蚀产物,发现... 文章研究了不同氯离子(Cl^(-))浓度对经压入法处理的T91钢在中性盐雾环境中腐蚀行为的影响。采用10%和15%两种浓度的NaCl溶液,在标准中性盐雾试验条件下对压入试样进行了48~288 h的腐蚀试验。通过分析腐蚀失重、腐蚀形貌及腐蚀产物,发现15%NaCl环境下的试样腐蚀失重高于10%NaCl环境,且两者差距随腐蚀时间延长而增大,在288 h时达到最大值0.0085 g。这证明高Cl^(-)浓度环境对T91钢的腐蚀作用更强,且随时间累积效应明显。扫描电子显微镜观察结果显示,压痕处更易腐蚀,且Cl^(-)浓度越大腐蚀越严重,表明压入形成的应力集中(位错、微裂纹等)显著降低了该区域的耐蚀性,使其成为优先发生腐蚀的敏感区域。 展开更多
关键词 T91钢 压入法 盐雾试验 腐蚀失重
在线阅读 下载PDF
太原地铁1号线黄土湿陷底界综合判定方法研究
6
作者 文罕 高树东 +1 位作者 左璐 宋丽 《铁道勘察》 2026年第1期50-57,98,共9页
针对黄土地区城市轨道交通前期勘察中“湿陷底界”判定不一、室内外数据难以闭合等问题,提出一套以统一统计域与可审计参数为核心的湿陷底界综合判定方法,用于实现室内-现场结果一致性与底界深度的定量识别。以太原地铁1号线沿线典型场... 针对黄土地区城市轨道交通前期勘察中“湿陷底界”判定不一、室内外数据难以闭合等问题,提出一套以统一统计域与可审计参数为核心的湿陷底界综合判定方法,用于实现室内-现场结果一致性与底界深度的定量识别。以太原地铁1号线沿线典型场地为研究对象。首先,统一“统计域-分层规则-计入阈值”,采用自重湿陷系数阈值δ_(zs)≥0.015,将室内分级压缩-浸水试验与现场试坑浸水试验进行统计对齐;在相同统计域内,以现场观测对室内分层累计自重湿陷量进行校核,并反演地区经验系数β_(0),形成“参数闭合”;继而将δ_(zs)与湿陷起始压力p_(s)的剖面与土性-地质界面信息耦合,识别“阈值带”并据此判定工程意义上的湿陷底界;最后以剖面一致性、区段对比与地层学证据对判定结果开展鲁棒性验证。研究表明,室内分层累计自重湿陷量为486 mm,现场折算为384.9 mm,反演得到β_(0)=0.79(处于经验合理区间0.5~1.2),实现室内-现场湿陷量的可审计闭合;δ_(zs)-p_(s)联合剖面识别16~18 m为结构性与抗力“阈值带”,据此判定湿陷底界深为18 m。 展开更多
关键词 地铁 湿陷底界 现场浸水试验 自重湿陷量 湿陷性黄土
在线阅读 下载PDF
认知无线传感器网络下抗拜占庭攻击的SW-WSPRT算法
7
作者 吴俊 赵睿 +2 位作者 苏明坤 许晓荣 包建荣 《西安邮电大学学报》 2026年第1期82-89,共8页
针对认知无线传感器网络(Cognitive Wireless Sensor Networks,CWSNs)中协作频谱感知(Cooperative Spectrum Sensing,CSS)易受恶意传感器拜占庭攻击的问题,提出一种基于滑动窗口的加权序贯概率比检验(Sliding Window-based Weighted Seq... 针对认知无线传感器网络(Cognitive Wireless Sensor Networks,CWSNs)中协作频谱感知(Cooperative Spectrum Sensing,CSS)易受恶意传感器拜占庭攻击的问题,提出一种基于滑动窗口的加权序贯概率比检验(Sliding Window-based Weighted Sequential Probability Ratio Test,SW-WSPRT)算法。通过分析滑动窗口内传感器的历史感知行为,根据滑动窗口内传感器的感知精度进一步建立信誉值和权重值分配机制,识别排除恶意传感器以降低其对融合中心的影响,并让信誉值最高的传感器感知报告参与似然比检验,最终由融合中心据此作出关于主用户(Primary User,PU)状态的全局决策。仿真实验结果表明,在拜占庭攻击下,SW-WSPRT识别恶意传感器的性能优于其他算法,且显著提升了协作频谱感知性能,在信噪比较优或较差的网络下,平均仅需约3或7个最高信誉值的感知报告即可作出可靠的全局决策。 展开更多
关键词 协作频谱感知 拜占庭攻击 滑动窗口 信誉值机制 加权机制 序贯概率比检验
在线阅读 下载PDF
Analysis of the Weight Loss of High Temperature Cement Slurry 被引量:2
8
作者 Kunhong Lv Zhiqiang Huang +1 位作者 Xingjie Ling Xueqin Xia 《Fluid Dynamics & Materials Processing》 EI 2022年第5期1307-1318,共12页
The weight loss of cement slurry is the main cause of early annular air channeling and accurate experimental evaluation of the law of loss change is the key to achieve compression stability and prevent this undesired ... The weight loss of cement slurry is the main cause of early annular air channeling and accurate experimental evaluation of the law of loss change is the key to achieve compression stability and prevent this undesired phenomenon.Typically,tests on the pressure loss of cement slurry are carried out for temperature smaller than 120°C,and this condition cannot simulate effectively the situation occurring in high temperature wells.For this reason,in this study a series of experimental tests have been conducted considering a larger range of temperatures,different retarders and fluid loss additives.The results show that with an increase in the temperature,the weight loss curve of cement slurry changes from a“two-stage”to a“three-stage”behavior,and the risk of channeling increases accordingly.On increasing the amount of retarder and fluid loss additive,the transition time of cement slurry displays a non-monotonic behavior(it decreases first and then increases).It is found that the optimized retarder and fluid loss additive dosage are 0.2%and 2.5%,respectively. 展开更多
关键词 CEMENTING weight loss test weight loss law cement slurry EVALUATION anti-gas channeling
在线阅读 下载PDF
基于高阶加权最小二乘的机翼多源载荷校准方法
9
作者 沈雯阳 江文松 +2 位作者 罗哉 李占海 田永卫 《计量学报》 北大核心 2026年第1期16-25,共10页
针对机翼结构载荷测量应变电桥在载荷校准地面试验中出现的非线性和异方差问题,提出基于高阶加权最小二乘的机翼载荷校准方法。根据机翼表面加载点和测量切面之间的空间位置关系,建立多源载荷在翼面上的传递模型;利用弯矩、剪力、扭矩... 针对机翼结构载荷测量应变电桥在载荷校准地面试验中出现的非线性和异方差问题,提出基于高阶加权最小二乘的机翼载荷校准方法。根据机翼表面加载点和测量切面之间的空间位置关系,建立多源载荷在翼面上的传递模型;利用弯矩、剪力、扭矩与测量切面之间的回归分析,建立多源载荷与多源响应之间的高阶超定校准模型;通过对校准模型参数引入误差加权因子,并结合最小二乘法,实现高阶超定模型的参数寻优,进而构建机翼载荷校准方程。为验证该方法的有效性,对某轻型机翼开展地面校准实验。实验结果表明:所提方法的平均误差为1.84%,平均标准误差为3.02 N·m,拟合优度为0.988;传统载荷校准方法的平均误差为2.56%,平均标准误差为4.03 N·m,拟合优度为0.999,所提方法优于传统载荷校准方法。 展开更多
关键词 力学计量 载荷校准试验 机翼多源载荷 多元非线性回归 高阶加权最小二乘法
在线阅读 下载PDF
Light-Weight Design of CRH Wind Deflector Panels based on Woven Textile Sandwich Composites 被引量:4
10
作者 Hualin Fan Jianfeng Ouyang +3 位作者 Fangfang Sun Peishi Yu Ning Kuang Yang Hu 《Acta Mechanica Solida Sinica》 SCIE EI CSCD 2016年第2期208-220,共13页
The woven textile sandwich composite(WTSC) is a promising lightweight composite.In bending,two competing core shearing failure modes reduce the strength;deflection induced by the core shearing deformation reduces th... The woven textile sandwich composite(WTSC) is a promising lightweight composite.In bending,two competing core shearing failure modes reduce the strength;deflection induced by the core shearing deformation reduces the flexural rigidity.To replace a solid composite laminate,the span of WTSC panel must be greater than a critical value,which was deduced on the condition that the load capacity and flexural rigidity of the WTSC panel are equal to those of the composite laminate.Three WTSC panels were tested in bending,so that the failure modes were observed,and the critical spans were determined.Using the alternative design method,the WTSC based wind deflector with reduced weight has been fabricated and mounted on the CRH(China Railway High-speed). 展开更多
关键词 sandwich CRH wind deflector light-weight design mechanical testing
原文传递
A Note on Change Point Detection Using Weighted Least Square 被引量:2
11
作者 Reza Habibi 《Applied Mathematics》 2011年第10期1309-1312,共4页
This paper is concerned with the application of weighted least square method in change point analysis. Testing shift in the mean normal observations with time varying variances as well as of a GARCH time series are co... This paper is concerned with the application of weighted least square method in change point analysis. Testing shift in the mean normal observations with time varying variances as well as of a GARCH time series are considered. For both cases, the weighted estimators are given and their asymptotic behaviors are studied. It is also described that how the resampling methods like Monte Carlo and bootstrap may be applied to compute the finite sample behavior of estimators. 展开更多
关键词 BOOTSTRAP BROWNIAN Bridge Change Point GARCH Series testing Shift MONTE Carlo weightED Least Square
在线阅读 下载PDF
Optimal Weights in Nonparametric Analysis of Clustered ROC Curve Data
12
作者 Yougui Wu 《Journal of Applied Mathematics and Physics》 2015年第7期828-834,共7页
In diagnostic trials, clustered data are obtained when several subunits of the same patient are observed. Within-cluster correlations need to be taken into account when analyzing such clustered data. A nonparametric m... In diagnostic trials, clustered data are obtained when several subunits of the same patient are observed. Within-cluster correlations need to be taken into account when analyzing such clustered data. A nonparametric method has been proposed by Obuchowski (1997) to estimate the Receiver Operating Characteristic curve area (AUC) for such clustered data. However, Obuchowski’s estimator gives equal weight to all pairwise rankings within and between cluster. In this paper, we modify Obuchowski’s estimate by allowing weights for the pairwise rankings vary across clusters. We consider the optimal weights for estimating one AUC as well as two AUCs’ difference. Our results in this paper show that the optimal weights depends on not only the within-patient correlation but also the proportion of patients that have both unaffected and affected units. More importantly, we show that the loss of efficiency using equal weight instead of our optimal weights can be severe when there is a large within-cluster correlation and the proportion of patients that have both unaffected and affected units is small. 展开更多
关键词 DIAGNOSTIC test Optimal weight ASYMPTOTIC RELATIVE Efficiency Receiver Operating Characteristic CURVE Area under a ROC CURVE
暂未订购
建设金融强国背景下碳中和加权指数构建与投资绩效研究 被引量:1
13
作者 齐岳 齐竹君 《管理现代化》 北大核心 2025年第2期148-156,共9页
建设金融强国,需要不断丰富金融支持绿色低碳发展的方式和工具。当前我国碳中和指数与基金普遍使用筛选加权策略,投资组合集中于低碳行业和高碳转型行业,导致行业集中度过高、风险分散不足的问题。为克服这一局限,可以使用基本面加权法... 建设金融强国,需要不断丰富金融支持绿色低碳发展的方式和工具。当前我国碳中和指数与基金普遍使用筛选加权策略,投资组合集中于低碳行业和高碳转型行业,导致行业集中度过高、风险分散不足的问题。为克服这一局限,可以使用基本面加权法与上市公司碳中和评价数据,构建碳中和加权指数。该指数既能考虑碳中和因素,又能在理论上将资产选择范围扩大至全行业,利用跨行业的多样化配置降低投资组合的整体风险,提升长期稳健收益。选取上证50为样本的投资绩效检验表明,碳中和加权指数能够获得显著超过上证50的超额收益。为避免样本调换对结论的影响,使用市值加权等方法构造基准指数,发现碳中和加权指数的业绩表现依然更优。上述发现对开发更多样化的低碳投资产品具有借鉴意义,有助于引导资本流向绿色产业,促进“双碳”目标顺利实现。 展开更多
关键词 “双碳”战略 指数构建 投资绩效检验 基本面加权法
在线阅读 下载PDF
握力体质量比和新发心脑血管疾病的关联:中国健康与养老追踪调查大数据分析
14
作者 王世杰 胡骁宇 +2 位作者 段卓然 唐英峰 王维 《中国组织工程研究》 北大核心 2026年第12期3190-3197,共8页
背景:肌肉疏松性肥胖是中老年心脑血管疾病患者的重要特点,单纯握力测试可能无法准确评估肌肉质量。骨骼肌作为胰岛素敏感组织,肌肉力量、胰岛素抵抗与心脑血管疾病风险之间可能存在着多重关系。目的:分析中老年人握力体质量比、握力、... 背景:肌肉疏松性肥胖是中老年心脑血管疾病患者的重要特点,单纯握力测试可能无法准确评估肌肉质量。骨骼肌作为胰岛素敏感组织,肌肉力量、胰岛素抵抗与心脑血管疾病风险之间可能存在着多重关系。目的:分析中老年人握力体质量比、握力、坐起测试与心脑血管疾病之间的风险关系,此外探究三酰甘油-葡萄糖指数(TyG)在其中的中介作用。方法:此次研究来源于中国健康与养老追踪调查,纳入了4 543例无心脑血管疾病史的中老年人,观察在基线调查后的7年内是否新发生了心脑血管疾病。根据基线时的TyG指数、握力、坐起测试时间、握力体质量比进行COX回归分析,此外以TyG指数为中介变量,基于回归分析进行中介效应检验。结果与结论:(1)研究人群中有675例在随访中新发生了心脑血管疾病,发病率为14.9%;(2)风险关系分析中,TyG指数(HR=1.18,95%CI:1.05-1.32)、可能肌少症(HR=1.22,95%CI:1.03-1.44,P=0.02)、坐起测试(HR=1.302,95%CI:1.104-1.536,P=0.002)、握力体质量比(HR=1.288,95%CI:1.083-1.531,P=0.004)均显著,而握力(HR=0.988,95%CI:0.776-1.258,P=0.92)结果不显著;(3)此外TyG指数在握力体质量比与新发心脑血管疾病之间存在介导作用(总自然间接效应:HR=1.024,95%CI:1.005-1.043),且作用方向一致,握力体质量比降低增加心脑血管疾病风险的机制中有部分是通过影响TyG指数实现的;(4)提示中老年人可通过握力体质量比评估肌肉力量与体质量的匹配程度,为评估胰岛素抵抗和心脑血管疾病风险提供了参考。 展开更多
关键词 中老年人 肌肉力量 握力体质量指数 5次坐起测试 三酰甘油-葡萄糖指数 胰岛素抵抗 心血管疾病
暂未订购
Determination of reduced Young s modulus of thin films using indentation test 被引量:1
15
作者 Wuzhu YAN Shifeng WEN Jun LIU Zhufeng YUE 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2009年第6期468-480,共13页
The flat cylindrical indentation tests with different sizes of punch radius were investigated using finite element method (FEM) aimed to reveal the effect of punch size on the indentation behavior of the film/substr... The flat cylindrical indentation tests with different sizes of punch radius were investigated using finite element method (FEM) aimed to reveal the effect of punch size on the indentation behavior of the film/substrate system. Based on the FEM results analysis, two methods was proposed to separate film's reduced Young's modulus from a film/substrate system. The first method was based on a new weight function that quantifies film's and substrate's contributions to the overall mechanical properties of the film/substrate system in the flat cylindrical indentation test. The second method, a numerical approach, including fitting and extrapolation procedures was put forward. Both of the results from the two methods showed a reasonable agreement with the one input FE model. At last, the effect of maximum indentation depth and the surface micro-roughness of the thin film on the reduced Young's modulus of the film/substrate system were discussed. The methods proposed in the present study provide some new conceptions on evaluating other properties of thin films, e.g. creep, for which a flat-ended punch is also employed. 展开更多
关键词 Indentation test Reduced Young's modulus Punch size effect weight function Film/substrate system
在线阅读 下载PDF
高渗透性土料管袋堆叠脱水特性研究
16
作者 王强 陈建明 +3 位作者 高洪祥 史吏 俞演名 于思冬 《浙江工业大学学报》 北大核心 2025年第5期533-541,共9页
钱塘江河口某段土工管袋围堰施工采用潮间赶潮施工方式,对管袋成型时间提出了严苛要求。首先基于现场填充的河床砂质粉土料源与管袋尺寸,利用时间因数T_(v)使室内试验与现场施工形成对标关系;然后进行现场管袋脱水试验和室内管袋自重及... 钱塘江河口某段土工管袋围堰施工采用潮间赶潮施工方式,对管袋成型时间提出了严苛要求。首先基于现场填充的河床砂质粉土料源与管袋尺寸,利用时间因数T_(v)使室内试验与现场施工形成对标关系;然后进行现场管袋脱水试验和室内管袋自重及加压脱水模型试验,通过对比验证了采用时间因数T_(v)对标室内与现场脱水时间的准确性;最后对孔隙水压力、脱水量等工程指标进行监测和分析,获得不同加压时刻对管袋脱水量与脱水效率的影响规律。试验结果表明:相较于单层管袋自重脱水,在时间因数T_(v)达到0.592(对标现场6.5 h)前进行上部加压可有效提高管袋脱水量并减少成型所需时间,与自重脱水相比,在T_(v)=0.082(对标现场0.6 h)时加压可使管袋脱水量增加22.6%,成型所需时间提早31.6%。研究可为管袋堆叠连续施工的填筑时机提供数据基础。 展开更多
关键词 土工管袋 围堰工程 模型试验 堆叠时刻 脱水量
在线阅读 下载PDF
可展开式桥墩船撞防护装置数值仿真及试验研究
17
作者 宋旭明 司合想 +1 位作者 唐冕 罗祥威 《中南大学学报(自然科学版)》 北大核心 2025年第9期3783-3796,共14页
针对现有主流桥墩防撞装置尺寸过大、防护效果不足等问题,设计一种基于夹层结构的新型可展开式桥墩船撞防护装置。首先,利用ANSYS有限元软件建立碰撞模型,对比波纹形、三角形和梯形这3种夹层防撞单元的防撞性能。随后,开展防撞单元试件... 针对现有主流桥墩防撞装置尺寸过大、防护效果不足等问题,设计一种基于夹层结构的新型可展开式桥墩船撞防护装置。首先,利用ANSYS有限元软件建立碰撞模型,对比波纹形、三角形和梯形这3种夹层防撞单元的防撞性能。随后,开展防撞单元试件的落锤冲击试验,分析防撞试件的动力响应和防护性能,并建立有限元模型进行模拟,验证数值模拟的合理性与准确性。最后,设计正交试验,通过数值仿真研究防撞单元的最优参数组合。研究结果表明:波纹形夹层防撞单元在3种构造形式中效果最佳;填充泡沫材料后,防撞单元的刚度增大,落锤试验测得的冲击力明显增大,锤头位移最大值相较于未填充时减小59.5%;当总质量为300 kg的落锤从1 m高处落下时,安装防撞单元试件时测得的冲击力相较于未安装时的冲击力减小约96.2%;有限元计算与落锤试验结果中冲击力和位移峰值的最大相对误差均小于10%,验证了有限元仿真的准确性;正交试验得到防撞单元最优参数组合是迎撞板厚度为9.0 mm,夹层板厚度为5.0 mm,横隔板厚度为6.0 mm,外侧板厚度为5.5 mm,夹层高宽比为1:0.95。基于试验与仿真计算结果,本文设计的防撞装置具有良好的吸能缓冲效果。 展开更多
关键词 夹层结构 防撞装置 落锤试验 防护性能
在线阅读 下载PDF
Mathematical Model of Weight in Evaluation System
18
作者 孙璐 邓学钧 《Journal of Southeast University(English Edition)》 EI CAS 1996年第2期112-119,共8页
Having studied the property of compare matrix, this paper establishes a mathematical model of minimizing the sum of Euclidean norm (SEN) by means of the least square method. It is proved that the non linear program ... Having studied the property of compare matrix, this paper establishes a mathematical model of minimizing the sum of Euclidean norm (SEN) by means of the least square method. It is proved that the non linear program model can be transformed into linear a 展开更多
关键词 weight EVALUATION SYSTEM optimal design statistical test ANALYTIC HIERARCHY process
在线阅读 下载PDF
增重蚕丝绵的Py-GC-MS法快速鉴定
19
作者 包海峰 赵海浪 葛元宇 《印染》 北大核心 2025年第3期72-75,共4页
建立了一种快速鉴定增重蚕丝绵热裂解-气相色谱-质谱分析(Py-GC-MS)方法,得到了聚甲基丙烯酰胺最佳热裂解条件:热裂解温度为600℃,热裂解时间为0.5 min,裂解炉接口温度为300℃。该方法在甲基丙烯酰胺质量浓度为300~2000 mg/kg的线性范围... 建立了一种快速鉴定增重蚕丝绵热裂解-气相色谱-质谱分析(Py-GC-MS)方法,得到了聚甲基丙烯酰胺最佳热裂解条件:热裂解温度为600℃,热裂解时间为0.5 min,裂解炉接口温度为300℃。该方法在甲基丙烯酰胺质量浓度为300~2000 mg/kg的线性范围内,线性相关系数为0.997,方法检出限为300 mg/kg,加标回收率为92.22%~112.57%,相对标准偏差(RSD)为1.72%~5.81%(n=7)。若检出甲基丙烯酰胺质量分数超过300 mg/kg,则判定蚕丝绵经过增重处理。该方法可直接鉴定聚甲基丙烯酰胺增重蚕丝绵,具有快速环保、准确高效等优点。 展开更多
关键词 测试 热裂解-气相色谱-质谱法 聚甲基丙烯酰胺 增重 蚕丝绵
在线阅读 下载PDF
清热解毒刮痧膏制备工艺优化
20
作者 陈卫卫 凌玉妙 +3 位作者 吴昌顺 刘相岑 黄俊善 庞宇舟 《中成药》 北大核心 2025年第10期3218-3224,共7页
目的优化清热解毒刮痧膏制备工艺。方法以料液比、乙醇体积分数、提取时间为影响因素,紫丁香苷、长梗冬青苷含量和干膏率为评价指标,AHP-CRITIC复合加权法结合正交试验优化提取工艺。以单硬脂酸甘油酯用量、白凡士林用量、蜂蜡用量、司... 目的优化清热解毒刮痧膏制备工艺。方法以料液比、乙醇体积分数、提取时间为影响因素,紫丁香苷、长梗冬青苷含量和干膏率为评价指标,AHP-CRITIC复合加权法结合正交试验优化提取工艺。以单硬脂酸甘油酯用量、白凡士林用量、蜂蜡用量、司盘-80与吐温-80比例为影响因素,外观、涂抹延展性、离心稳定性、耐寒耐热性的综合评分为评价指标,正交试验优化成型工艺。以乳化温度、乳化时间、搅拌速度为影响因素,外观、涂抹延展性、离心稳定性、耐寒耐热性的综合评分为评价指标,正交试验优化乳化条件。结果最佳条件为处方量药材加14倍量50%乙醇加热回流提取2次,每次1 h,合并滤液,回收乙醇后浓缩成1 g/mL药液,再采用乳化法分别将油相(4%单硬脂酸甘油酯、3%白凡士林、5%蜂蜡、8%司盘-80、47%轻质液状石蜡)、水相(6%吐温-80、8%甘油、0.1%羟苯乙酯、14%药液、4%月桂氮[艹卓]酮、蒸馏水0.9%)在60℃下熔融,将水相缓缓加到油相中,200 r/min乳化15 min直至得到均匀的乳膏。结论该方法合理、稳定、可行,可为清热解毒刮痧膏后续开发成医疗机构制剂提供科学依据。 展开更多
关键词 清热解毒刮痧膏 制备工艺 正交试验 AHP-CRITIC复合加权法
暂未订购
上一页 1 2 83 下一页 到第
使用帮助 返回顶部