Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Introducing B2 ordering can effectively improve the mechanical properties of lightweight refractory high-entropy alloys(LRHEAs).However,(Zr,Al)-enriched B2 precipitates generally reduce the ductility because their ord...Introducing B2 ordering can effectively improve the mechanical properties of lightweight refractory high-entropy alloys(LRHEAs).However,(Zr,Al)-enriched B2 precipitates generally reduce the ductility because their ordering characteristic is destroyed after dislocation shearing.Meanwhile,the local chemical order(LCO)cannot provide an adequate strengthening effect due to its small size.展开更多
China National Intellectual Property Administration(CNIPA) issued the"Notice on Strengthening Management of Trademark Use"(Notice) on November 17,2025.This directive aims to guide the business community,part...China National Intellectual Property Administration(CNIPA) issued the"Notice on Strengthening Management of Trademark Use"(Notice) on November 17,2025.This directive aims to guide the business community,particularly the trademark users and trademark law practitioners,toward stricter compliance,focusing on curbing deceptive practices and enhancing fair competition.展开更多
As a typical tungsten-based composite consisting of tungsten(W)particles and matrix phase,tungsten heavy alloys(WHAs)are extensively utilized in the military due to their exceptional strength and high density.However,...As a typical tungsten-based composite consisting of tungsten(W)particles and matrix phase,tungsten heavy alloys(WHAs)are extensively utilized in the military due to their exceptional strength and high density.However,the large grain size(>30μm)of powder metallurgy liquid phase sintered(LPS)WHAs and the low strength of the matrix phase limit the further improvement of the alloy.In this work,high-density ultrafine WHAs were fabricated by two-step low-temperature sintering,and the density of the alloy reached 17 g/cm^(3) with an average W particle size of 7.81μm.Additionally,the eutectic reaction be-tween Ni and Ta was controlled to generate dispersed nano-Ni_(3)Ta phases in situ in the matrix phase,fur-ther improving the strength of the alloy.Under the synergistic strengthening effect of fine-grain strength-ening,dispersion strengthening,and solid solution strengthening,the average ultimate tensile strength of the alloy reached 1190.39 MPa.At the same time,the alloy maintained good elongation with a total elon-gation of 20.8%due to the good co-grid interface orientation between the Ni_(3)Ta phase and the matrix phase.This study provides a new idea for developing high-strength WHAs and has a guiding significance for developing Ni-based alloys.展开更多
This study demonstrates simultaneous enhancement of magnetic and mechanical properties in NdFeB magnets through Ti addition.The coercivity increases by 1.1 kOe without compromising remanence,while bending strength imp...This study demonstrates simultaneous enhancement of magnetic and mechanical properties in NdFeB magnets through Ti addition.The coercivity increases by 1.1 kOe without compromising remanence,while bending strength improves by 159.05%.Analytical results reveal that Ti predominantly combines with free B atoms to form TiB_(2)phases,which reduce the brittleness of grain boundary(GB)phase and impede dislocation motion.The superposition of stress fields around dislocations generates reactive forces that counteract external loads,thereby enhancing GB strength.Concurrently,B depletion in GB phases induces amorphous transformation,further enhancing boundary strength.A minor fraction of Ti incorporates into the main phase,enhancing covalent bond strength and forming a reinforced main phase.Additionally,Ti addition promotes grain refinement and increases GB density,significantly improving bending strength.The synergistic effects of heterogeneous phase formation,amorphous transformation,main phase reinforcement,and grain refinement collectively enable coordinated strengthening between the main phase and GBs.This multi-mechanism approach provides novel insights for mechanical property optimization in Nd FeB magnets.展开更多
Magnesium-lithium(Mg-Li) alloy,as the lightest metal structure material,has unparalleled market prospects in aerospace,weapons and equipment,electronic technology,transportation,and many other fields.However,it is har...Magnesium-lithium(Mg-Li) alloy,as the lightest metal structure material,has unparalleled market prospects in aerospace,weapons and equipment,electronic technology,transportation,and many other fields.However,it is hard to balance the superlight and high strength of Mg-Li alloy,and the inferior high-temperature strength and poor high-temperature stability limit the wide application of Mg-Li alloy.At present,the main methods to improve the mechanical properties of Mg-Li alloy are alloying,grain refinement,and compound strengthening.The domestic and overseas research progress in the strengthening and toughening methods and mechanisms of Mg-Li alloy are reviewed,and the future development of the high strength and high toughness Mg-Li alloy is prospected.展开更多
This paper examines the effect of Fe addition on the microstructure characterized by scanning electron microscopy/electron backscattered diffraction,neutron diffraction,and synchrotron X-ray tomography and the mechani...This paper examines the effect of Fe addition on the microstructure characterized by scanning electron microscopy/electron backscattered diffraction,neutron diffraction,and synchrotron X-ray tomography and the mechanical properties of Al-Mg-Mn-Fe-Cu alloys.The findings reveal that the microstructures of the alloys consisted of an Al matrix,Al_(6)(FeMn),and Al_(2)CuMg phase particles.The addition of Fe significantly increased the yield strength(YS),and ultimate tensile strength(UTS)of the alloys,while reducing elongation.The transformation of the 3D morphology of the Al_(6)(FeMn)phase from separated and fine particles with Chinese-script morphology to interconnected rod-like structure as Fe content increased from 0.1%to 0.8%.This strengthening effect was attributed to the slip lines being blocked at the vicinity of the inter-connected Fe-rich phase,leading to grain rotation and dislocation density increment around the Fe-rich phase,ultimately improving the strength of the alloys.However,the Fe-rich phases and Al_(2)CuMg phases were found to be prone to cracking under tensile stress,resulting in decreased elongation of the alloys.This study provides a potential application in the design and manufacturing of new non-heat-treatable Al alloys for the automotive industry.展开更多
To effectively regulate the grain boundary infiltration in CoCrFeMnNi high-entropy alloy(Cantor alloys,HEA)caused by the violent atomic interdiffusion,the higher configuration entropy on Cantor alloys surface was desi...To effectively regulate the grain boundary infiltration in CoCrFeMnNi high-entropy alloy(Cantor alloys,HEA)caused by the violent atomic interdiffusion,the higher configuration entropy on Cantor alloys surface was designed and realized via eutectic high-entropy(EHEA)transformation.Meanwhile,to effectively alleviate the residual stress caused by the notable difference in the thermal expansion coefficient(CTE)between Cantor alloys and Zr-3 alloys,a cladding layer was applied to the HEA surface using laser cladding technology of Nb,followed by brazing to Zr-3 alloys with Zr63.2Cu filler.The cladding layer’s microstructure comprised Nbss and FCC+(Co,Ni)_(2) Nb eutectic structure,resulting from an in-situ reaction between Cantor alloys and Nb.The Nbss and FCC demonstrated good plasticity,and the(Co,Ni)_(2) Nb Laves phase provided increased strength,endowing both good plastic deformation ability and strength of the cladding layer.Notably,the existence of EHEA in the laser cladding layer made the Cantor alloy entropy from 1.61 R to 1.77 R,greatly enhancing its thermal stability and suppressing the grave grain boundary infiltration.Joints produced via laser cladding with Nb-assisted brazing exhibited a complex microstructure(HEA/Nbss+FCC+(Co,Ni)_(2)Nb/(Zr,Nb)(Cr,Mn)_(2)+(Zr,Nb)ss/(Zr,Nb)_(2)(Cu,Ni,Co,Fe)+(Zr,Nb)(Cr,Mn)_(2)+(Zr,Nb)ss/Zr-3) and a significantly improved shear strength of 242.8 MPa at 1010℃ for 10 min,42.4%higher than that of directly brazed joints.This improvement was attributed to reduced grain boundary infiltration,alleviated residual stress due to CTE disparity,and eliminated micro-cracks in the brazing seam.This study presents an effective solution for reducing residual stresses and achieving reliable bonding between Cantor alloys and Zr-3 alloys,with potential applications in brazing CoCrFeNi-based HEA and Zr-3 due to the beneficial eutectic reaction between CoCrFeNi and Nb.展开更多
Refractory high/medium-entropy alloys(RH/MEAs)are known for their outstanding performance at el-evated temperatures;however,they usually exhibit poor room-temperature plasticity,which can be at-tributed to the non-uni...Refractory high/medium-entropy alloys(RH/MEAs)are known for their outstanding performance at el-evated temperatures;however,they usually exhibit poor room-temperature plasticity,which can be at-tributed to the non-uniform deformation that occurs at room temperature.Once cracks nucleate,they will rapidly propagate into vertical splitting cracks.Here,we introduce multiple phases including FCC and HCP phases into the NbMoTa RMEA via appropriate addition of carbon.The results show that multiple-phase synergy effectively suppresses non-uniform deformation,thereby delaying the onset of vertical splitting cracks.An optimal combination of compressive strength-plasticity is achieved by the(NbMoTa)_(92.5)C_(7.5) alloy.The significant improvement in room-temperature mechanical properties can be attributed to its hierarchical microstructure:in the mesoscale,the BCC matrix is divided by eutectic structures;while at the microscale,the BCC matrix is further refined by abundant lath-like FCC precipitates.The FCC precip-itates contain high-density stacking faults,acting as a dislocation source under compressive loading.The HCP phase in the eutectic microstructures,in turn,acts as a strong barrier to dislocation movement and simultaneously increases the dislocation storage capacity.These findings open a new route to tailor the microstructure and mechanical properties of RH/MEAs.展开更多
The microstructure evolution and strengthening mechanism of WE54 alloy with different hard-plate rolling(HPR)processes were systematically investigated.The results suggest that the mechanical properties of the as-roll...The microstructure evolution and strengthening mechanism of WE54 alloy with different hard-plate rolling(HPR)processes were systematically investigated.The results suggest that the mechanical properties of the as-rolled alloys are significantly enhanced compared to those of the as-cast alloy.When subjected to three rolling passes at 450℃ and 490℃,grain refinement occurs due to dynamic recrystallization.A mixed-grain structure is formed after a single pass rolling with a substantial reduction(65%)at 490℃.The dynamic recrystallization(DRX)mechanism of the alloy during the HPR includes continuous dynamic recrystallization(CDRX),discontinuous dynamic recrystallization(DDRX),and twin-induced recrystallization(TDRX).The WE54 alloy exhibits the highest strength after three passes of HPR at 450℃,with tensile strength and yield strength of 374 and 323 MPa,respectively.The significant improvement in the mechanical properties of the alloy is primarily attributed to fine-grain strengthening,solid solution strengthening,and dislocation strengthening.展开更多
The unique structure and formation mechanism of medium-entropy alloys(MEAs)generally result in bet-ter comprehensive properties than traditional alloys.However,the strength-ductility trade-offremains a bottleneck,whic...The unique structure and formation mechanism of medium-entropy alloys(MEAs)generally result in bet-ter comprehensive properties than traditional alloys.However,the strength-ductility trade-offremains a bottleneck,which limits their applications.In this study,we designed novel high-performance CrNiCu x MEAs with a heterophase composition by incorporating a Cu-rich phase,and they were fabricated using laser-directed energy deposition(LDED).The results show that synergistic strengthening from multiple phases significantly improved the mechanical properties of the alloys,resulting in a tensile strength of 675 MPa and a ductility of 34.4%,demonstrating an excellent combination of high tensile strength and ductility.The improved mechanical properties of the CrNiCu x medium-entropy alloys are primarily due to the heterophase interfacial strengthening mechanism.In the alloy,numerous semi-coherent and coher-ent interfaces formed between the Cr-rich phase,Cu-rich phase,and the matrix,creating extensive lattice distortions at the interfaces.An increase in the Cu-rich phase content promoted the interaction between phases,enhancing the strain energy of the alloy and the barrier strength of the interfaces.The calcu-latedτint values,ranging from approximately 5.92-6.69 GPa,are significantly higher than those found in traditional alloys,providing a benchmark for designing new high-performance medium-entropy alloys.展开更多
OBJECTIVE:To evaluate the 10-year therapeutic efficacy of Traditional Chinese Medicine(TCM)using the Strengthening Spleen and Draining Dampness therapy in the management of idiopathic membranous nephropathy(IMN).METHO...OBJECTIVE:To evaluate the 10-year therapeutic efficacy of Traditional Chinese Medicine(TCM)using the Strengthening Spleen and Draining Dampness therapy in the management of idiopathic membranous nephropathy(IMN).METHODS:A single-center,retrospective analysis was conducted on patients diagnosed with IMN who met predefined inclusion and exclusion criteria.Data were collected from the Department of Nephrology at Longhua Hospital,affiliated with Shanghai University of Traditional Chinese Medicine,between January 2007 and December 2011.Clinical parameters including 24-h urinary protein,serum albumin,serum creatinine,and estimated glomerular filtration rate(e GFR,EPI)were assessed at baseline and at 1,3,5,and 10 years of follow-up.The efficacy of the Strengthening Spleen and Draining Dampness therapy was analyzed using repeated measures analysis of variance(ANOVA).Kaplan-Meier survival curves and multivariate proportional hazards model(Cox regression models)were employed to identify factors associated with treatment outcomes.RESULTS:A total of 265 patients were included,with a median follow-up duration of 96 months(36,122).TCM treatment significantly reduced 24-h urinary protein levels(P<0.001),and increased serum albumin levels(P<0.001),while serum creatinine remained stable(P=0.187).Remission rates at 1,3,5,and 10 years were 52.81%,69.71%,68.39%,and 72.36%,respectively,and the rates of avoiding composite outcome events at the same intervals were 98.27%,94.29%,94.19%,and 93.50%.In the subgroup receiving TCM only,remission rates were 56.67%,84.44%,76.32%,and 82.86%.For patients treated initially with Western Medicine followed by TCM,the rates were 52.83%,65.85%,67.47%and 67.75%.In the cohort of patients who received TCM as their first-line therapy,remission rates were 49.23%,62.50%,61.76%,and 69.23%.Multivariate Cox regression analysis revealed that the duration of TCM treatment[hazard ratio(HR)=0.826,95%confidence interval(CI)(0.779,0.876),P<0.001],presence of hypertension[HR=1.912,95%CI(1.181,3.094),P=0.008],baseline serum albumin level[HR=0.930,95%CI(0.894,0.969),P<0.001],and the rate of serum albumin increase within the first year of treatment[HR=0.930,95%CI(0.909,0.957),P<0.001]were significantly associated with clinical outcomes.CONCLUSION:The Strengthening Spleen and Draining Dampness therapy demonstrated robust short-and longterm efficacy in treating IMN,with high rates of remission and renal survival over 10 years.Key factors influencing clinical remission included the duration of TCM treatment,baseline serum albumin levels,the presence of hypertension,and the rate of increase in serum albumin within the first year.These findings suggest that this TCM approach provides a viable long-term treatment option for IMN.展开更多
Martensite is an important microstructure in ultrahigh-strength steels,and enhancing the strength of martensitic steels often involves the introduction of precipitated phases within the martensitic matrix.Despite cons...Martensite is an important microstructure in ultrahigh-strength steels,and enhancing the strength of martensitic steels often involves the introduction of precipitated phases within the martensitic matrix.Despite considerable research efforts devoted to this area,a systematic summary of these advancements is lacking.This review focuses on the precipitates prevalent in ultrahigh-strength martensitic steel,primarily carbides(e.g.,MC,M_(2)C,and M_(3)C)and intermetallic compounds(e.g.,Ni Al,Ni_(3)X,and Fe_(2)Mo).The precipitation-strengthening effect of these precipitates on ultrahigh-strength martensitic steel is discussed from the aspects of heat treatment processes,microstructure of precipitate-strengthened martensite matrix,and mechanical performance.Finally,a perspective on the development of precipitation-strengthened martensitic steel is presented to contribute to the advancement of ultrahigh-strength martensitic steel.This review highlights significant findings,ongoing challenges,and opportunities in the development of ultrahigh-strength martensitic steel.展开更多
The extraordinary strength of metal/graphene composites is significantly determined by the characteristic size,distribution and morphology of graphene.However,the effect of the graphene size/distribution on the mechan...The extraordinary strength of metal/graphene composites is significantly determined by the characteristic size,distribution and morphology of graphene.However,the effect of the graphene size/distribution on the mechanical properties and related strengthening mechanisms has not been fully elucidated.Herein,under the same volume fraction and distribution conditions of graphene,molecular dynamics simulations were used to investigate the effect of graphene sheet size on the hardness and deformation behavior of Cu/graphene composites under complex stress field.Two models of pure single crystalline Cu and graphene fully covered Cu matrix composite were constructed for comparison.The results show that the strengthening effect changes with varying the graphene sheet size.Besides the graphene dislocation blocking effect and the load-bearing effect,the deformation mechanisms change from stacking fault tetrahedron,dislocation bypassing and dislocation cutting to dislocation nucleation in turn with decreasing the graphene sheet size.The hardness of Cu/graphene composite,with the graphene sheet not completely covering the metal matrix,can even be higher than that of the fully covered composite.The extra strengthening mechanisms of dislocation bypassing mechanism and the stacking fault tetrahedra pinning dislocation mechanism contribute to the increase in hardness.展开更多
Room temperature tensile tests were carried on the hot-rolled state ultra-low carbon and low alloy cabainite and martensite steels which were get by different finishing temperatures and different cooling methods.We us...Room temperature tensile tests were carried on the hot-rolled state ultra-low carbon and low alloy cabainite and martensite steels which were get by different finishing temperatures and different cooling methods.We used the Scanning Electron Microscopy (SEM),Electron Backscattered Diffraction (EBSD) and X-Ray Diffractometer (XRD) to identify the metallographic structure and analyse the precipitated phase.The inherent mechanism of high strength of ultra-low carbon and low alloy bainite and martensite steels was discussed,and the analysis indicated that the reinforcement of ultra-low carbon and low alloy bainite and martensite steels was mainly produced by the superposition of the dislocation strengthening,solution strengthening and grain refinement strengthening.展开更多
The microstructure evolution and strengthening ability of natural aging(NA),delayed aging(DA),and DA after pre-aging(PDA)of Al-Mg-Si alloy were studied.Results show that small and unstable atomic clusters are generate...The microstructure evolution and strengthening ability of natural aging(NA),delayed aging(DA),and DA after pre-aging(PDA)of Al-Mg-Si alloy were studied.Results show that small and unstable atomic clusters are generated during NA,leading to the formation of low-density coarseβʺandβ′phases,thus reducing the strength of DA alloy.However,atomic clusters and GP zones with larger sizes and high Mg/Si molar ratio form during pre-aging treatment.They prevent the generation of clusters during NA and can serve as effective nucleation sites in subsequent artificial aging,which elevates the number density of fineβʺprecipitates and improves the alloy strength.After pre-aging at 175°C,the strengthening capacity of PDA alloy is restored,with hardness and yield strength reaching 95.1%and 101.9%of peak-aged alloy.展开更多
The LPSO phase can effectively enhance the mechanical properties of Mg alloys.To investigate the impact of different LPSO phase contents and morphologies on the mechanical properties and strengthening mechanisms of Mg...The LPSO phase can effectively enhance the mechanical properties of Mg alloys.To investigate the impact of different LPSO phase contents and morphologies on the mechanical properties and strengthening mechanisms of Mg-Y-Al alloys under room temperature deformation,this study prepared Mg-12Y-1Al(WA121)alloys containing Bulk-LPSO(B-LPSO),Lattice-LPSO(L-LPSO),and Needle-like LPSO(N-LPSO)with different contents through different heat-treatment processes.The results indicate that with the increase in heat treatment time,the contents of B-LPSO phases remain essentially unchanged,and the contents of L-LPSO and N-LPSO phases gradually increase.The increase in N-LPSO phase content is the most pronounced,with the highest content(7.29%)observed in the alloy treated for 4.5 h.Moreover,the alloy treated for 4.5 h exhibits the best mechanical properties,with ultimate tensile strength(UTS),tensile yield strength(TYS),and elongation(EL)values of 177 MPa,139 MPa,and 4.27%,respectively.Compared to the as-cast alloy,UTS,TYS,and EL increased by 9.94%,11.2%,and 27.1%,respectively.The study reveals that all three LPSO phases exhibit excellent dislocation hindering effects,effectively enhancing strength of the alloy.Additionally,the N-LPSO phase,due to its dense distribution,forms numerous dislocation channels within the grains,dispersing stress concentration within the grains to improve plasticity of the alloy.Furthermore,the interaction between the N-LPSO phase and the other phases in the alloy can also enhance plasticity of the alloy.Therefore,the alloy treated for 4.5 h demonstrates a synergistic improvement in strength and plasticity.Research has revealed that the precipitation mechanism of the N-LPSO phase in the as-cast WA121 alloy involves the formation of an Al-rich region adjacent to the needle-like Mg_(24)Y_(5) phase.Subsequently,the Y element provided by the dissolving Mg_(24)Y_(5) phase reacts with this region,ultimately leading to the formation of the needle-like LPSO phase.展开更多
As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective ...As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective solution is to use externally bonded fiber-reinforced polymer(FRP)sheets;however,limited research has been done on aged PC beams using the FRP,especially for beams with unbonded prestressing strands(UPC beams).Therefore,this research investigates the flexural strengthening efficacy of external FRP sheets on aged UPC beams with unbonded tendons.Aging minimally affected the failure modes of UPC beams,with nonstrengthened beams showing flexural failure via rebar yielding and concrete crushing,and FRP-strengthened beams failing due to FRP debonding and tensile reinforcement yielding,though tendons in the aged beams did not yield due to prestress losses,unlike the new beams.The U-wrap anchor curbed widespread debonding,leading to tensile reinforcement yielding and FRP rupture.Aging hastened crack growth and stiffness loss,increasing deflections and reducing load resistance,but FRP reinforcement mitigated these effects,enhancing cracking resistance by 14%over the unstrengthened aged beams and 7%over the new beams while boosting ultimate resistance by 9%above the non-strengthened new beams.Compared to the new FRP-strengthened beams,the aged counterparts had lower cracking resistance,stiffness and capacity—showing 20%higher deflections,7–9%lower serviceability loads,7%–17%reduced ultimate strength and 17%less deformability—due to prestress losses and premature FRP debonding.展开更多
To explore ambient strengthening and high temperature ductility,a combined forming approach of multidirectional forging and asymmetric rolling was proposed.A novel multicomponent ultralight Mg-3.11Li-2.31Al-1.95Sn-0.9...To explore ambient strengthening and high temperature ductility,a combined forming approach of multidirectional forging and asymmetric rolling was proposed.A novel multicomponent ultralight Mg-3.11Li-2.31Al-1.95Sn-0.94Y-0.45Er alloy was fabricated.The microstructural evolution and mechanical properties were investigated by microstructural characterization and tensile test.The combined forming results in remarkable grain refinement.The ultimate tensile strength and elongation of(255±7)MPa and 24.9%,respectively,were obtained at room temperature.The contribution of various strengthening mechanisms of the rolled alloy was obtained.Microstructural examination revealed the occurrence of dynamic recrystallization at 473-573 K and dynamic grain growth at 573-623 K.The maximum elongation of 293.9%was demonstrated at 623 K and 5×10^(-4)s^(-1).The dominate deformation mechanism at elevated temperatures is dislocation viscous glide.展开更多
High-performance 24CrNiMo steel was fabricated using Laser Powder Bed Fusion (LPBF). Subsequent quenching treatment was applied and the influence of quenching temperatures on micro-structure evolution and properties w...High-performance 24CrNiMo steel was fabricated using Laser Powder Bed Fusion (LPBF). Subsequent quenching treatment was applied and the influence of quenching temperatures on micro-structure evolution and properties was systematically characterised and analysed. The micro-structure of the as-built steel consisted of two parts. The first part comprised martensite with twins combined with ω-Fe nano-particles, and the second part consisted of lower bainite in the molten pool, as well as upper bainite, granular bainite and tempered martensite in the heat-affected zone. With the quenching temperatures varying from 800℃ to 950℃, the micro-structure gradually transformed from acicular ferrite + martensite to tempered martensite +θ-Fe3C carbides, and the grain size exhibited noticeable growth. Moreover, quenching treatments could eliminate the anisotropy and inhomogeneity of the micro-structure. The rod-shaped nanosized η-Fe2C and θ-Fe3C precipitates were clearly observed, which were converted from ω-Fe and distributed at multiple angles in the lath. The size and number of nano-precipitates, triggered by the high self-tempering degree of martensite, gradually increased. The relationships among grain size, the twins, dislocation density and nano-precipitation and the dramatically improved performance of quenched samples were analysed using strengthening mechanisms. After quenching at 850℃, the as-built 24CrNiMo steel attained ultra-high mechanical properties including hardness, Ultimate Tensile Strength (UTS), Elongation (El) and impact energy with values of 480.9 HV_(1), 1611.4 MPa, 9.8% and 42.8 J, respectively. Meanwhile, both the wear and thermal fatigue resistance increased by approximately 40%. This study demonstrated that LPBF-fabricated 24CrNiMo steel, with matching good performances, can be achieved using a subsequent one-step quenching process.展开更多
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金supported by the National Natural Science Foundation of China(Nos.52171166 and U20A20231)the Natural Science Foundation of Hunan Province,China(Nos.2024JJ2060 and 2024JJ5406)+1 种基金the Key Laboratory of Materials in Dynamic Extremes of Sichuan Province(No.2023SCKT1102)the Postgraduate Scientific Research Innovation Project of National University of Defense Technology(No.XJJC2024065).
文摘Introducing B2 ordering can effectively improve the mechanical properties of lightweight refractory high-entropy alloys(LRHEAs).However,(Zr,Al)-enriched B2 precipitates generally reduce the ductility because their ordering characteristic is destroyed after dislocation shearing.Meanwhile,the local chemical order(LCO)cannot provide an adequate strengthening effect due to its small size.
文摘China National Intellectual Property Administration(CNIPA) issued the"Notice on Strengthening Management of Trademark Use"(Notice) on November 17,2025.This directive aims to guide the business community,particularly the trademark users and trademark law practitioners,toward stricter compliance,focusing on curbing deceptive practices and enhancing fair competition.
基金supported by the National Natural Science Foundation of China(No.51701242,51931012)the Science and Technology Innovation Program of Hunan Province(No.2023RC3068).
文摘As a typical tungsten-based composite consisting of tungsten(W)particles and matrix phase,tungsten heavy alloys(WHAs)are extensively utilized in the military due to their exceptional strength and high density.However,the large grain size(>30μm)of powder metallurgy liquid phase sintered(LPS)WHAs and the low strength of the matrix phase limit the further improvement of the alloy.In this work,high-density ultrafine WHAs were fabricated by two-step low-temperature sintering,and the density of the alloy reached 17 g/cm^(3) with an average W particle size of 7.81μm.Additionally,the eutectic reaction be-tween Ni and Ta was controlled to generate dispersed nano-Ni_(3)Ta phases in situ in the matrix phase,fur-ther improving the strength of the alloy.Under the synergistic strengthening effect of fine-grain strength-ening,dispersion strengthening,and solid solution strengthening,the average ultimate tensile strength of the alloy reached 1190.39 MPa.At the same time,the alloy maintained good elongation with a total elon-gation of 20.8%due to the good co-grid interface orientation between the Ni_(3)Ta phase and the matrix phase.This study provides a new idea for developing high-strength WHAs and has a guiding significance for developing Ni-based alloys.
基金financially supported by the National Natural Science Foundation of China(No.52361033)National Key Research and Development Program(No.2022YFB3505400)+6 种基金Ministry of Industry and Information Technology Heavy Rare Earth Special use of Sintered NdFeB Project(No.TC220H06J)Academic and Technical Leaders in Major Disciplines in Jiangxi Province(No.20225BCJ23007)Jiangxi Natural Science Foundation Youth Fund(No.20232BAB214011)the Young Elite Scientists Sponsorship Program by CAST(No.2022QNRC001)Research Projects of Ganjiang Innovation Academy,Chinese Academy of Sciences(No.E255J001)Science and Technology Major Project of Ganzhou(No.202101064871)Program for Excellent Young Talents(No.JXUSTQJYC2024003)
文摘This study demonstrates simultaneous enhancement of magnetic and mechanical properties in NdFeB magnets through Ti addition.The coercivity increases by 1.1 kOe without compromising remanence,while bending strength improves by 159.05%.Analytical results reveal that Ti predominantly combines with free B atoms to form TiB_(2)phases,which reduce the brittleness of grain boundary(GB)phase and impede dislocation motion.The superposition of stress fields around dislocations generates reactive forces that counteract external loads,thereby enhancing GB strength.Concurrently,B depletion in GB phases induces amorphous transformation,further enhancing boundary strength.A minor fraction of Ti incorporates into the main phase,enhancing covalent bond strength and forming a reinforced main phase.Additionally,Ti addition promotes grain refinement and increases GB density,significantly improving bending strength.The synergistic effects of heterogeneous phase formation,amorphous transformation,main phase reinforcement,and grain refinement collectively enable coordinated strengthening between the main phase and GBs.This multi-mechanism approach provides novel insights for mechanical property optimization in Nd FeB magnets.
基金the National Natural Science Foundation of China(Nos.51771115,51775334,51821001 and U2037601)the Joint Fund for Space Science and Technology(No.6141B06310106)。
文摘Magnesium-lithium(Mg-Li) alloy,as the lightest metal structure material,has unparalleled market prospects in aerospace,weapons and equipment,electronic technology,transportation,and many other fields.However,it is hard to balance the superlight and high strength of Mg-Li alloy,and the inferior high-temperature strength and poor high-temperature stability limit the wide application of Mg-Li alloy.At present,the main methods to improve the mechanical properties of Mg-Li alloy are alloying,grain refinement,and compound strengthening.The domestic and overseas research progress in the strengthening and toughening methods and mechanisms of Mg-Li alloy are reviewed,and the future development of the high strength and high toughness Mg-Li alloy is prospected.
基金support from the Natural Science Foundation of China(Nos.52104373,52074131,and 51974092)the Basic and Applied Basic Foundation of Guangdong Province(No.2020B1515120065)。
文摘This paper examines the effect of Fe addition on the microstructure characterized by scanning electron microscopy/electron backscattered diffraction,neutron diffraction,and synchrotron X-ray tomography and the mechanical properties of Al-Mg-Mn-Fe-Cu alloys.The findings reveal that the microstructures of the alloys consisted of an Al matrix,Al_(6)(FeMn),and Al_(2)CuMg phase particles.The addition of Fe significantly increased the yield strength(YS),and ultimate tensile strength(UTS)of the alloys,while reducing elongation.The transformation of the 3D morphology of the Al_(6)(FeMn)phase from separated and fine particles with Chinese-script morphology to interconnected rod-like structure as Fe content increased from 0.1%to 0.8%.This strengthening effect was attributed to the slip lines being blocked at the vicinity of the inter-connected Fe-rich phase,leading to grain rotation and dislocation density increment around the Fe-rich phase,ultimately improving the strength of the alloys.However,the Fe-rich phases and Al_(2)CuMg phases were found to be prone to cracking under tensile stress,resulting in decreased elongation of the alloys.This study provides a potential application in the design and manufacturing of new non-heat-treatable Al alloys for the automotive industry.
基金supported by the National Natural Science Foundation of China(Grant Nos.52275321 and 52205348)the Shandong Natural Science Foundation(Grant No.ZR2023JQ021)+3 种基金the Taishan Scholars Foundation of Shandong Province(No.tsqn 201812128)the Innovation Scientists and Technicians Troop Projects of Henan Province(No.204200510031)the Heilongjiang Touyan Innovation Team Program(No.HITTY-20190013)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)(Nos.NRF-2021R1A2C3006662 and NRF-2022R1A5A1030054).
文摘To effectively regulate the grain boundary infiltration in CoCrFeMnNi high-entropy alloy(Cantor alloys,HEA)caused by the violent atomic interdiffusion,the higher configuration entropy on Cantor alloys surface was designed and realized via eutectic high-entropy(EHEA)transformation.Meanwhile,to effectively alleviate the residual stress caused by the notable difference in the thermal expansion coefficient(CTE)between Cantor alloys and Zr-3 alloys,a cladding layer was applied to the HEA surface using laser cladding technology of Nb,followed by brazing to Zr-3 alloys with Zr63.2Cu filler.The cladding layer’s microstructure comprised Nbss and FCC+(Co,Ni)_(2) Nb eutectic structure,resulting from an in-situ reaction between Cantor alloys and Nb.The Nbss and FCC demonstrated good plasticity,and the(Co,Ni)_(2) Nb Laves phase provided increased strength,endowing both good plastic deformation ability and strength of the cladding layer.Notably,the existence of EHEA in the laser cladding layer made the Cantor alloy entropy from 1.61 R to 1.77 R,greatly enhancing its thermal stability and suppressing the grave grain boundary infiltration.Joints produced via laser cladding with Nb-assisted brazing exhibited a complex microstructure(HEA/Nbss+FCC+(Co,Ni)_(2)Nb/(Zr,Nb)(Cr,Mn)_(2)+(Zr,Nb)ss/(Zr,Nb)_(2)(Cu,Ni,Co,Fe)+(Zr,Nb)(Cr,Mn)_(2)+(Zr,Nb)ss/Zr-3) and a significantly improved shear strength of 242.8 MPa at 1010℃ for 10 min,42.4%higher than that of directly brazed joints.This improvement was attributed to reduced grain boundary infiltration,alleviated residual stress due to CTE disparity,and eliminated micro-cracks in the brazing seam.This study presents an effective solution for reducing residual stresses and achieving reliable bonding between Cantor alloys and Zr-3 alloys,with potential applications in brazing CoCrFeNi-based HEA and Zr-3 due to the beneficial eutectic reaction between CoCrFeNi and Nb.
基金financial support from the Na-tional Natural Science Foundation of China(No.52231006)National Key Research and Development Program of China(No.2017YFB0702003)the National Natural Science Foundation of China(No.51871217).
文摘Refractory high/medium-entropy alloys(RH/MEAs)are known for their outstanding performance at el-evated temperatures;however,they usually exhibit poor room-temperature plasticity,which can be at-tributed to the non-uniform deformation that occurs at room temperature.Once cracks nucleate,they will rapidly propagate into vertical splitting cracks.Here,we introduce multiple phases including FCC and HCP phases into the NbMoTa RMEA via appropriate addition of carbon.The results show that multiple-phase synergy effectively suppresses non-uniform deformation,thereby delaying the onset of vertical splitting cracks.An optimal combination of compressive strength-plasticity is achieved by the(NbMoTa)_(92.5)C_(7.5) alloy.The significant improvement in room-temperature mechanical properties can be attributed to its hierarchical microstructure:in the mesoscale,the BCC matrix is divided by eutectic structures;while at the microscale,the BCC matrix is further refined by abundant lath-like FCC precipitates.The FCC precip-itates contain high-density stacking faults,acting as a dislocation source under compressive loading.The HCP phase in the eutectic microstructures,in turn,acts as a strong barrier to dislocation movement and simultaneously increases the dislocation storage capacity.These findings open a new route to tailor the microstructure and mechanical properties of RH/MEAs.
基金financially supported by the Natural Science Basic Research Program of Shaanxi Province,China(No.2023-JC-QN-0581)Advanced Power Specialty,China(No.YK22C-9)。
文摘The microstructure evolution and strengthening mechanism of WE54 alloy with different hard-plate rolling(HPR)processes were systematically investigated.The results suggest that the mechanical properties of the as-rolled alloys are significantly enhanced compared to those of the as-cast alloy.When subjected to three rolling passes at 450℃ and 490℃,grain refinement occurs due to dynamic recrystallization.A mixed-grain structure is formed after a single pass rolling with a substantial reduction(65%)at 490℃.The dynamic recrystallization(DRX)mechanism of the alloy during the HPR includes continuous dynamic recrystallization(CDRX),discontinuous dynamic recrystallization(DDRX),and twin-induced recrystallization(TDRX).The WE54 alloy exhibits the highest strength after three passes of HPR at 450℃,with tensile strength and yield strength of 374 and 323 MPa,respectively.The significant improvement in the mechanical properties of the alloy is primarily attributed to fine-grain strengthening,solid solution strengthening,and dislocation strengthening.
基金supported by the National Natural Science Foundation of China(Grant No.U2341254)the National Natural Science Foundation of China(Grant No.52071124),the Natural Science Foundation of Jiangsu Province(No.BK20230502)the Jiangsu Funding Program for Excellent Postdoctoral Talent(No.2022ZB547).
文摘The unique structure and formation mechanism of medium-entropy alloys(MEAs)generally result in bet-ter comprehensive properties than traditional alloys.However,the strength-ductility trade-offremains a bottleneck,which limits their applications.In this study,we designed novel high-performance CrNiCu x MEAs with a heterophase composition by incorporating a Cu-rich phase,and they were fabricated using laser-directed energy deposition(LDED).The results show that synergistic strengthening from multiple phases significantly improved the mechanical properties of the alloys,resulting in a tensile strength of 675 MPa and a ductility of 34.4%,demonstrating an excellent combination of high tensile strength and ductility.The improved mechanical properties of the CrNiCu x medium-entropy alloys are primarily due to the heterophase interfacial strengthening mechanism.In the alloy,numerous semi-coherent and coher-ent interfaces formed between the Cr-rich phase,Cu-rich phase,and the matrix,creating extensive lattice distortions at the interfaces.An increase in the Cu-rich phase content promoted the interaction between phases,enhancing the strain energy of the alloy and the barrier strength of the interfaces.The calcu-latedτint values,ranging from approximately 5.92-6.69 GPa,are significantly higher than those found in traditional alloys,providing a benchmark for designing new high-performance medium-entropy alloys.
基金Supported by the National Key Research and Development Project,Clinical Study on the Treatment of Refractory Membranous Nephropathy with the Treatment of Strengthening Spleen and Draining Dampness in Method using Single Group Target Value Method(No.2019YFC1709403)Systematic Study on the Diagnosis and Treatment Rules of Membranous Nephropathy in Traditional Chinese Medicine(No.2023YFC35033501,No.2023YFC35033503)。
文摘OBJECTIVE:To evaluate the 10-year therapeutic efficacy of Traditional Chinese Medicine(TCM)using the Strengthening Spleen and Draining Dampness therapy in the management of idiopathic membranous nephropathy(IMN).METHODS:A single-center,retrospective analysis was conducted on patients diagnosed with IMN who met predefined inclusion and exclusion criteria.Data were collected from the Department of Nephrology at Longhua Hospital,affiliated with Shanghai University of Traditional Chinese Medicine,between January 2007 and December 2011.Clinical parameters including 24-h urinary protein,serum albumin,serum creatinine,and estimated glomerular filtration rate(e GFR,EPI)were assessed at baseline and at 1,3,5,and 10 years of follow-up.The efficacy of the Strengthening Spleen and Draining Dampness therapy was analyzed using repeated measures analysis of variance(ANOVA).Kaplan-Meier survival curves and multivariate proportional hazards model(Cox regression models)were employed to identify factors associated with treatment outcomes.RESULTS:A total of 265 patients were included,with a median follow-up duration of 96 months(36,122).TCM treatment significantly reduced 24-h urinary protein levels(P<0.001),and increased serum albumin levels(P<0.001),while serum creatinine remained stable(P=0.187).Remission rates at 1,3,5,and 10 years were 52.81%,69.71%,68.39%,and 72.36%,respectively,and the rates of avoiding composite outcome events at the same intervals were 98.27%,94.29%,94.19%,and 93.50%.In the subgroup receiving TCM only,remission rates were 56.67%,84.44%,76.32%,and 82.86%.For patients treated initially with Western Medicine followed by TCM,the rates were 52.83%,65.85%,67.47%and 67.75%.In the cohort of patients who received TCM as their first-line therapy,remission rates were 49.23%,62.50%,61.76%,and 69.23%.Multivariate Cox regression analysis revealed that the duration of TCM treatment[hazard ratio(HR)=0.826,95%confidence interval(CI)(0.779,0.876),P<0.001],presence of hypertension[HR=1.912,95%CI(1.181,3.094),P=0.008],baseline serum albumin level[HR=0.930,95%CI(0.894,0.969),P<0.001],and the rate of serum albumin increase within the first year of treatment[HR=0.930,95%CI(0.909,0.957),P<0.001]were significantly associated with clinical outcomes.CONCLUSION:The Strengthening Spleen and Draining Dampness therapy demonstrated robust short-and longterm efficacy in treating IMN,with high rates of remission and renal survival over 10 years.Key factors influencing clinical remission included the duration of TCM treatment,baseline serum albumin levels,the presence of hypertension,and the rate of increase in serum albumin within the first year.These findings suggest that this TCM approach provides a viable long-term treatment option for IMN.
基金supported by the National Natural Science Foundation of China(Nos.52122408 and 52071023)financial support from the Fundamental Research Funds for the Central Universities(University of Science and Technology Beijing,No.FRF-TP-2021-04C1,and 06500135)。
文摘Martensite is an important microstructure in ultrahigh-strength steels,and enhancing the strength of martensitic steels often involves the introduction of precipitated phases within the martensitic matrix.Despite considerable research efforts devoted to this area,a systematic summary of these advancements is lacking.This review focuses on the precipitates prevalent in ultrahigh-strength martensitic steel,primarily carbides(e.g.,MC,M_(2)C,and M_(3)C)and intermetallic compounds(e.g.,Ni Al,Ni_(3)X,and Fe_(2)Mo).The precipitation-strengthening effect of these precipitates on ultrahigh-strength martensitic steel is discussed from the aspects of heat treatment processes,microstructure of precipitate-strengthened martensite matrix,and mechanical performance.Finally,a perspective on the development of precipitation-strengthened martensitic steel is presented to contribute to the advancement of ultrahigh-strength martensitic steel.This review highlights significant findings,ongoing challenges,and opportunities in the development of ultrahigh-strength martensitic steel.
基金Foundation of Northwest Institute for Nonferrous Metal Research(ZZXJ2203)Capital Projects of Financial Department of Shaanxi Province(YK22C-12)+3 种基金Innovation Capability Support Plan in Shaanxi Province(2023KJXX-083)Key Research and Development Projects of Shaanxi Province(2024GXYBXM-351,2024GX-YBXM-356)National Natural Science Foundation of China(62204207,12204383)Xi'an Postdoctoral Innovation Base Funding Program。
文摘The extraordinary strength of metal/graphene composites is significantly determined by the characteristic size,distribution and morphology of graphene.However,the effect of the graphene size/distribution on the mechanical properties and related strengthening mechanisms has not been fully elucidated.Herein,under the same volume fraction and distribution conditions of graphene,molecular dynamics simulations were used to investigate the effect of graphene sheet size on the hardness and deformation behavior of Cu/graphene composites under complex stress field.Two models of pure single crystalline Cu and graphene fully covered Cu matrix composite were constructed for comparison.The results show that the strengthening effect changes with varying the graphene sheet size.Besides the graphene dislocation blocking effect and the load-bearing effect,the deformation mechanisms change from stacking fault tetrahedron,dislocation bypassing and dislocation cutting to dislocation nucleation in turn with decreasing the graphene sheet size.The hardness of Cu/graphene composite,with the graphene sheet not completely covering the metal matrix,can even be higher than that of the fully covered composite.The extra strengthening mechanisms of dislocation bypassing mechanism and the stacking fault tetrahedra pinning dislocation mechanism contribute to the increase in hardness.
文摘Room temperature tensile tests were carried on the hot-rolled state ultra-low carbon and low alloy cabainite and martensite steels which were get by different finishing temperatures and different cooling methods.We used the Scanning Electron Microscopy (SEM),Electron Backscattered Diffraction (EBSD) and X-Ray Diffractometer (XRD) to identify the metallographic structure and analyse the precipitated phase.The inherent mechanism of high strength of ultra-low carbon and low alloy bainite and martensite steels was discussed,and the analysis indicated that the reinforcement of ultra-low carbon and low alloy bainite and martensite steels was mainly produced by the superposition of the dislocation strengthening,solution strengthening and grain refinement strengthening.
基金supported by the National Natural Science Foundation of China(No.52261007)the Science and Technology Project of Guangxi,China(No.GKAD22035039)the Opening Fund for Key Laboratory of New Processing Technology for Nonferrous Metal&Materials,Ministry of Education,Guilin University of Technology,China(Nos.22KF-11,22KF-14).
文摘The microstructure evolution and strengthening ability of natural aging(NA),delayed aging(DA),and DA after pre-aging(PDA)of Al-Mg-Si alloy were studied.Results show that small and unstable atomic clusters are generated during NA,leading to the formation of low-density coarseβʺandβ′phases,thus reducing the strength of DA alloy.However,atomic clusters and GP zones with larger sizes and high Mg/Si molar ratio form during pre-aging treatment.They prevent the generation of clusters during NA and can serve as effective nucleation sites in subsequent artificial aging,which elevates the number density of fineβʺprecipitates and improves the alloy strength.After pre-aging at 175°C,the strengthening capacity of PDA alloy is restored,with hardness and yield strength reaching 95.1%and 101.9%of peak-aged alloy.
基金supported by the Qinghai Provincial Science and Technology Department Basic Research Program(No.2025ZY029).
文摘The LPSO phase can effectively enhance the mechanical properties of Mg alloys.To investigate the impact of different LPSO phase contents and morphologies on the mechanical properties and strengthening mechanisms of Mg-Y-Al alloys under room temperature deformation,this study prepared Mg-12Y-1Al(WA121)alloys containing Bulk-LPSO(B-LPSO),Lattice-LPSO(L-LPSO),and Needle-like LPSO(N-LPSO)with different contents through different heat-treatment processes.The results indicate that with the increase in heat treatment time,the contents of B-LPSO phases remain essentially unchanged,and the contents of L-LPSO and N-LPSO phases gradually increase.The increase in N-LPSO phase content is the most pronounced,with the highest content(7.29%)observed in the alloy treated for 4.5 h.Moreover,the alloy treated for 4.5 h exhibits the best mechanical properties,with ultimate tensile strength(UTS),tensile yield strength(TYS),and elongation(EL)values of 177 MPa,139 MPa,and 4.27%,respectively.Compared to the as-cast alloy,UTS,TYS,and EL increased by 9.94%,11.2%,and 27.1%,respectively.The study reveals that all three LPSO phases exhibit excellent dislocation hindering effects,effectively enhancing strength of the alloy.Additionally,the N-LPSO phase,due to its dense distribution,forms numerous dislocation channels within the grains,dispersing stress concentration within the grains to improve plasticity of the alloy.Furthermore,the interaction between the N-LPSO phase and the other phases in the alloy can also enhance plasticity of the alloy.Therefore,the alloy treated for 4.5 h demonstrates a synergistic improvement in strength and plasticity.Research has revealed that the precipitation mechanism of the N-LPSO phase in the as-cast WA121 alloy involves the formation of an Al-rich region adjacent to the needle-like Mg_(24)Y_(5) phase.Subsequently,the Y element provided by the dissolving Mg_(24)Y_(5) phase reacts with this region,ultimately leading to the formation of the needle-like LPSO phase.
基金support by the Ministry of Education and Training of Vietnam for this research,under grant no.B2023-MBS-02.
文摘As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective solution is to use externally bonded fiber-reinforced polymer(FRP)sheets;however,limited research has been done on aged PC beams using the FRP,especially for beams with unbonded prestressing strands(UPC beams).Therefore,this research investigates the flexural strengthening efficacy of external FRP sheets on aged UPC beams with unbonded tendons.Aging minimally affected the failure modes of UPC beams,with nonstrengthened beams showing flexural failure via rebar yielding and concrete crushing,and FRP-strengthened beams failing due to FRP debonding and tensile reinforcement yielding,though tendons in the aged beams did not yield due to prestress losses,unlike the new beams.The U-wrap anchor curbed widespread debonding,leading to tensile reinforcement yielding and FRP rupture.Aging hastened crack growth and stiffness loss,increasing deflections and reducing load resistance,but FRP reinforcement mitigated these effects,enhancing cracking resistance by 14%over the unstrengthened aged beams and 7%over the new beams while boosting ultimate resistance by 9%above the non-strengthened new beams.Compared to the new FRP-strengthened beams,the aged counterparts had lower cracking resistance,stiffness and capacity—showing 20%higher deflections,7–9%lower serviceability loads,7%–17%reduced ultimate strength and 17%less deformability—due to prestress losses and premature FRP debonding.
基金supported by the National Natural Science Foundation of China(No.51334006)。
文摘To explore ambient strengthening and high temperature ductility,a combined forming approach of multidirectional forging and asymmetric rolling was proposed.A novel multicomponent ultralight Mg-3.11Li-2.31Al-1.95Sn-0.94Y-0.45Er alloy was fabricated.The microstructural evolution and mechanical properties were investigated by microstructural characterization and tensile test.The combined forming results in remarkable grain refinement.The ultimate tensile strength and elongation of(255±7)MPa and 24.9%,respectively,were obtained at room temperature.The contribution of various strengthening mechanisms of the rolled alloy was obtained.Microstructural examination revealed the occurrence of dynamic recrystallization at 473-573 K and dynamic grain growth at 573-623 K.The maximum elongation of 293.9%was demonstrated at 623 K and 5×10^(-4)s^(-1).The dominate deformation mechanism at elevated temperatures is dislocation viscous glide.
基金co-supported by the National Key Research and Development Program of China (No. 2022YFB4600500)the National Natural Science Foundation of China (No. 52235006)
文摘High-performance 24CrNiMo steel was fabricated using Laser Powder Bed Fusion (LPBF). Subsequent quenching treatment was applied and the influence of quenching temperatures on micro-structure evolution and properties was systematically characterised and analysed. The micro-structure of the as-built steel consisted of two parts. The first part comprised martensite with twins combined with ω-Fe nano-particles, and the second part consisted of lower bainite in the molten pool, as well as upper bainite, granular bainite and tempered martensite in the heat-affected zone. With the quenching temperatures varying from 800℃ to 950℃, the micro-structure gradually transformed from acicular ferrite + martensite to tempered martensite +θ-Fe3C carbides, and the grain size exhibited noticeable growth. Moreover, quenching treatments could eliminate the anisotropy and inhomogeneity of the micro-structure. The rod-shaped nanosized η-Fe2C and θ-Fe3C precipitates were clearly observed, which were converted from ω-Fe and distributed at multiple angles in the lath. The size and number of nano-precipitates, triggered by the high self-tempering degree of martensite, gradually increased. The relationships among grain size, the twins, dislocation density and nano-precipitation and the dramatically improved performance of quenched samples were analysed using strengthening mechanisms. After quenching at 850℃, the as-built 24CrNiMo steel attained ultra-high mechanical properties including hardness, Ultimate Tensile Strength (UTS), Elongation (El) and impact energy with values of 480.9 HV_(1), 1611.4 MPa, 9.8% and 42.8 J, respectively. Meanwhile, both the wear and thermal fatigue resistance increased by approximately 40%. This study demonstrated that LPBF-fabricated 24CrNiMo steel, with matching good performances, can be achieved using a subsequent one-step quenching process.
