An Al0.2Ga0.8N/AlN/Al0.2Ga0.8N heterostructure was grown by metalorganic chemical vapor deposition on a sapphire （0001） substrate with a thick （〉 1 μm） GaN intermediate layer. The Al composition was determined b...An Al0.2Ga0.8N/AlN/Al0.2Ga0.8N heterostructure was grown by metalorganic chemical vapor deposition on a sapphire （0001） substrate with a thick （〉 1 μm） GaN intermediate layer. The Al composition was determined by Rutherford backscattering （RBS）. Using the channeling scan around an off-normal [1213] axis in the （1010） plane of the Al0.2Ga0.8N layer, the tetragonal distortion eT, which is caused by the elastic strain in the epilayer, is investigated. The results show that eT in the high-quality Al0.2Ga0.8N layer is dramatically released by the AIN interlayer from 0.66% to 0.27%.展开更多
A 240-nm thick Al0.4In0.02Ga0.58N layer is grown by metal organic chemical vapour deposition, with an over 1-μm thick GaN layer used as a buffer layer on a substrate of sapphire （0001）. Rutherford backscattering an...A 240-nm thick Al0.4In0.02Ga0.58N layer is grown by metal organic chemical vapour deposition, with an over 1-μm thick GaN layer used as a buffer layer on a substrate of sapphire （0001）. Rutherford backscattering and channeling are used to characterize the microstructure of AlInGaN. The results show a good crystalline quality of AIInGaN （χmin = 1.5%） with GaN buffer layer. The channeling angular scan around an off-normal {1213} axis in the {1010} plane of the AlInGaN layer is used to determine tetragonal distortion eT, which is caused by the elastic strain in the AIInGaN. The resulting AlInGaN is subjected to an elastic strain at interracial layer, and the strain decreases gradually towards the near-surface layer. It is expected that an epitaxial AlInGaN thin film with a thickness of 850 nm will be fully relaxed （^eT = 0）.展开更多
Relying on direct and converse piezoelectric effects,piezo-acoustic backscatter(PAB)technology reflects ambient acoustic signals to enable underwater backscatter communications at near-zero power,which was first reali...Relying on direct and converse piezoelectric effects,piezo-acoustic backscatter(PAB)technology reflects ambient acoustic signals to enable underwater backscatter communications at near-zero power,which was first realized through a prototype.In this paper,we propose a mathematical model of the PAB assisted underwater acoustic(UWA)communication,and address the sparse channel estimation problem.First,we present a five-stage backscatter process to derive the backscatter coefficient,and propose the channel model for the shallow-water communications.Then,we formulate the shallow-water acoustic channel estimation problem as a sparse vector recovery one according to the compressed sensing theory,and leverage the orthogonal matching pursuit(OMP)algorithm to obtain the channel estimator.Finally,simulation results are provided to corroborate our proposed studies.展开更多
Existing orthogonal space-time block coding(OSTBC)schemes for backscatter communication systems cannot achieve a full transmission code rate when the tag is equipped with more than two antennas.In this paper,we propos...Existing orthogonal space-time block coding(OSTBC)schemes for backscatter communication systems cannot achieve a full transmission code rate when the tag is equipped with more than two antennas.In this paper,we propose a quasi-orthogonal spacetime block code(QOSTBC)that can achieve a full transmission code rate for backscatter communication systems with a four-antenna tag and then extend the scheme to support tags with 2i antennas.Specifically,we first present the system model for the backscatter system.Next,we propose the QOSTBC scheme to encode the tag signals.Then,we provide the corresponding maximum likelihood detection algorithms to recover the tag signals.Finally,simulation results are provided to demonstrate that our proposed QOSTBC scheme and the detection algorithm can achieve a better transmission code rate or symbol error rate performance for backscatter communication systems compared with benchmark schemes.展开更多
We put forth a project, that is: using the backscatter technique to realize adaptive long-distance HF broadcasting system in order to improve the quality of HF broadcasting. Then, we analyze errors of the system due t...We put forth a project, that is: using the backscatter technique to realize adaptive long-distance HF broadcasting system in order to improve the quality of HF broadcasting. Then, we analyze errors of the system due to the deviation of the ionospheric parameters' prediction. From the analysis, we draw the conclusion that our project is feasible. In addition, we point out that we can use frequency-spreading and information-coding technique to acquire more clear ionograms. We also offer a judgment on how to choose the control propagation mode on condition of multihop and the existence of more than one propagation mode on the signals' path.展开更多
The effect of equal channel angular extrusion （ECAE） on the microstructure of two Al-Mg-Si extrusion alloys was investigated by high resolution electron backscattered diffraction （EBSD） using a field emission gun ...The effect of equal channel angular extrusion （ECAE） on the microstructure of two Al-Mg-Si extrusion alloys was investigated by high resolution electron backscattered diffraction （EBSD） using a field emission gun scanning electron microscope （FEG-SEM） and a transmission electron microscope （TEM）. Two contrasting alloys： a dilute alloy, based on alloy 6061 and a concentrated alloy, based on alloy 6069 were employed for this research. It has been found that prior ECAE to extrusion promotes high angle grain boundaries （HAGBs） in the extrusions, and the increase in HAGBs ratio is due to the large shear deformation involved in the process of ECAE. Tensile testing results show that a further ageing treatment strengthens the alloys after extrusion and the ECAE processed extrusions are more ductile than conventional extrusions.展开更多
Circuit sensitivity of sensors or tags without battery is one practical constraint for ambient backscatter communication systems.This letter considers using beamforming to reduce the sensitivity constraint and evaluat...Circuit sensitivity of sensors or tags without battery is one practical constraint for ambient backscatter communication systems.This letter considers using beamforming to reduce the sensitivity constraint and evaluates the corresponding performance in terms of the tag activation distance and the system capacity.Specifically,we derive the activation probabilities of the tag in the case of single-antenna and multi-antenna transmitters.Besides,we obtain the capacity expressions for the ambient backscatter communication system with beamforming and illustrate the power allocation that maximizes the system capacity when the tag is activated.Finally,simulation results are provided to corroborate our proposed studies.展开更多
Semicontinuous equal-channel angular extrusion（ SC-ECAE） is a novel severe plastic deformation technique that has been developed to produce ultrafine-grain steels. Instead of external forces being exerted on specime...Semicontinuous equal-channel angular extrusion（ SC-ECAE） is a novel severe plastic deformation technique that has been developed to produce ultrafine-grain steels. Instead of external forces being exerted on specimens in the conventional ECAE,driving forces are applied to dies in SC-EACE. The deformation of interstitial-free（ IF） steel w as performed at room temperature,and individual specimens w ere repeatedly processed at various passes. An overall grain size of 0. 55 μm w as achieved after 10 passes. During SC-ECAE,the main textures of IF steel included { 111} ,{ 110} ,{ 112} ,{ 110} ,and { 110} At an early stage,increasing dislocations induce new textures and increase intensity. When the deformation continues,low-angle boundaries are formed betw een dislocation cell bands,w hich cause some dislocation cell bands to change their orientation,and therefore,the intensity of the textures begins to decrease. After more passes,the intensity of textures continues to decrease w ith high-angle boundaries,and the sub-grains in dislocation cell bands continuously increase. The present study reports the evolution of textures during deformation; these w ere examined and characterized using high-resolution electron backscattered diffraction（ EBSD） in a field emission scanning electron microscope. The mechanisms of texture evolution are discussed.展开更多
采用 MOCVD技术以 Al2 O3为衬底在 Ga N膜上生长了 In Ga N薄膜 .以卢瑟福背散射 /沟道 (RBS/Channeling)技术和光致发光 (PL )技术对 Inx Ga1 - x N / Ga N / Al2 O3样品进行了测试 ,获得了合金层的组分、厚度、元素随深度分布、结晶...采用 MOCVD技术以 Al2 O3为衬底在 Ga N膜上生长了 In Ga N薄膜 .以卢瑟福背散射 /沟道 (RBS/Channeling)技术和光致发光 (PL )技术对 Inx Ga1 - x N / Ga N / Al2 O3样品进行了测试 ,获得了合金层的组分、厚度、元素随深度分布、结晶品质及发光性能等信息 .研究表明生长温度和 TMIn/ TEGa比对 In Ga N薄膜的 In组分和生长速率影响很大 .在一定范围内 ,降低 TMIn/ TEGa比 ,In Ga N膜的生长速率增大 ,合金的 In组分反而提高 .降低生长温度 ,In Ga N膜的 In组分提高 ,但生长速率基本不变 . In Ga N薄膜的结晶品质随 In组分的增大而显著下降 ,In Ga N薄膜的 In组分由 0 .0 4增大到 0 .2 6 ,其最低沟道产额比由 4.1%增至 5 1.2 % . In Ga N薄膜中 In原子易处于替位位置 ,在所测试的 In组分范围 ,In原子的替位率均在 98%以上 .得到的质量良好的 In0 .0 4Ga0 .96 N薄膜的最低产额为 4.1% .研究结果还表明用 RBS技术和光致发光技术测定 In Ga N中 In组分的结果相差很大 ,In Ga N的PL谱要受较多因素影响 ,很难准确测定 In组分 ,而以 RBS技术得到的结果是可靠的 .展开更多
基金supported by the National Natural Science Foundation of China(Grant No.91226202)
文摘An Al0.2Ga0.8N/AlN/Al0.2Ga0.8N heterostructure was grown by metalorganic chemical vapor deposition on a sapphire （0001） substrate with a thick （〉 1 μm） GaN intermediate layer. The Al composition was determined by Rutherford backscattering （RBS）. Using the channeling scan around an off-normal [1213] axis in the （1010） plane of the Al0.2Ga0.8N layer, the tetragonal distortion eT, which is caused by the elastic strain in the epilayer, is investigated. The results show that eT in the high-quality Al0.2Ga0.8N layer is dramatically released by the AIN interlayer from 0.66% to 0.27%.
基金Project supported by the National Natural Science Foundation of China(Grant No.10875004)the National Basic Research Program of China(Grant No.2010CB832904)
文摘A 240-nm thick Al0.4In0.02Ga0.58N layer is grown by metal organic chemical vapour deposition, with an over 1-μm thick GaN layer used as a buffer layer on a substrate of sapphire （0001）. Rutherford backscattering and channeling are used to characterize the microstructure of AlInGaN. The results show a good crystalline quality of AIInGaN （χmin = 1.5%） with GaN buffer layer. The channeling angular scan around an off-normal {1213} axis in the {1010} plane of the AlInGaN layer is used to determine tetragonal distortion eT, which is caused by the elastic strain in the AIInGaN. The resulting AlInGaN is subjected to an elastic strain at interracial layer, and the strain decreases gradually towards the near-surface layer. It is expected that an epitaxial AlInGaN thin film with a thickness of 850 nm will be fully relaxed （^eT = 0）.
基金supported by National Key Research and Development Program of China(2020YFB1806604,2021YFB3901302)National Natural Science Foundation of China(No.61871026).
文摘Relying on direct and converse piezoelectric effects,piezo-acoustic backscatter(PAB)technology reflects ambient acoustic signals to enable underwater backscatter communications at near-zero power,which was first realized through a prototype.In this paper,we propose a mathematical model of the PAB assisted underwater acoustic(UWA)communication,and address the sparse channel estimation problem.First,we present a five-stage backscatter process to derive the backscatter coefficient,and propose the channel model for the shallow-water communications.Then,we formulate the shallow-water acoustic channel estimation problem as a sparse vector recovery one according to the compressed sensing theory,and leverage the orthogonal matching pursuit(OMP)algorithm to obtain the channel estimator.Finally,simulation results are provided to corroborate our proposed studies.
基金supported by Beijing Municipal Natural Science Foundation(L222002)the Natural Science Foundation of China(U22B2004).
文摘Existing orthogonal space-time block coding(OSTBC)schemes for backscatter communication systems cannot achieve a full transmission code rate when the tag is equipped with more than two antennas.In this paper,we propose a quasi-orthogonal spacetime block code(QOSTBC)that can achieve a full transmission code rate for backscatter communication systems with a four-antenna tag and then extend the scheme to support tags with 2i antennas.Specifically,we first present the system model for the backscatter system.Next,we propose the QOSTBC scheme to encode the tag signals.Then,we provide the corresponding maximum likelihood detection algorithms to recover the tag signals.Finally,simulation results are provided to demonstrate that our proposed QOSTBC scheme and the detection algorithm can achieve a better transmission code rate or symbol error rate performance for backscatter communication systems compared with benchmark schemes.
文摘We put forth a project, that is: using the backscatter technique to realize adaptive long-distance HF broadcasting system in order to improve the quality of HF broadcasting. Then, we analyze errors of the system due to the deviation of the ionospheric parameters' prediction. From the analysis, we draw the conclusion that our project is feasible. In addition, we point out that we can use frequency-spreading and information-coding technique to acquire more clear ionograms. We also offer a judgment on how to choose the control propagation mode on condition of multihop and the existence of more than one propagation mode on the signals' path.
文摘The effect of equal channel angular extrusion （ECAE） on the microstructure of two Al-Mg-Si extrusion alloys was investigated by high resolution electron backscattered diffraction （EBSD） using a field emission gun scanning electron microscope （FEG-SEM） and a transmission electron microscope （TEM）. Two contrasting alloys： a dilute alloy, based on alloy 6061 and a concentrated alloy, based on alloy 6069 were employed for this research. It has been found that prior ECAE to extrusion promotes high angle grain boundaries （HAGBs） in the extrusions, and the increase in HAGBs ratio is due to the large shear deformation involved in the process of ECAE. Tensile testing results show that a further ageing treatment strengthens the alloys after extrusion and the ECAE processed extrusions are more ductile than conventional extrusions.
基金supported by National Natural Science Foundation of China(No.62101601)the Fundamental Research Funds for the Central Universities under Grant 2020JBM017Joint Key Project of National Natural Science Foundation of China(No.U22B2004)。
文摘Circuit sensitivity of sensors or tags without battery is one practical constraint for ambient backscatter communication systems.This letter considers using beamforming to reduce the sensitivity constraint and evaluates the corresponding performance in terms of the tag activation distance and the system capacity.Specifically,we derive the activation probabilities of the tag in the case of single-antenna and multi-antenna transmitters.Besides,we obtain the capacity expressions for the ambient backscatter communication system with beamforming and illustrate the power allocation that maximizes the system capacity when the tag is activated.Finally,simulation results are provided to corroborate our proposed studies.
文摘Semicontinuous equal-channel angular extrusion（ SC-ECAE） is a novel severe plastic deformation technique that has been developed to produce ultrafine-grain steels. Instead of external forces being exerted on specimens in the conventional ECAE,driving forces are applied to dies in SC-EACE. The deformation of interstitial-free（ IF） steel w as performed at room temperature,and individual specimens w ere repeatedly processed at various passes. An overall grain size of 0. 55 μm w as achieved after 10 passes. During SC-ECAE,the main textures of IF steel included { 111} ,{ 110} ,{ 112} ,{ 110} ,and { 110} At an early stage,increasing dislocations induce new textures and increase intensity. When the deformation continues,low-angle boundaries are formed betw een dislocation cell bands,w hich cause some dislocation cell bands to change their orientation,and therefore,the intensity of the textures begins to decrease. After more passes,the intensity of textures continues to decrease w ith high-angle boundaries,and the sub-grains in dislocation cell bands continuously increase. The present study reports the evolution of textures during deformation; these w ere examined and characterized using high-resolution electron backscattered diffraction（ EBSD） in a field emission scanning electron microscope. The mechanisms of texture evolution are discussed.
