A high-efficiency and high-power vertical-cavity surface-emitting laser(VCSEL) side-pumped rod Nd:YAG laser with temperature adaptability are demonstrated. The VCSEL side-pumped laser module is designed and optimized....A high-efficiency and high-power vertical-cavity surface-emitting laser(VCSEL) side-pumped rod Nd:YAG laser with temperature adaptability are demonstrated. The VCSEL side-pumped laser module is designed and optimized. Five VCSEL arrays are symmetrically located around the laser rod and a large size diffused reflection chamber is designed to ensure a uniform pump distribution. Furthermore, the absorbed pump power distribution of the rod is simulated to verify the uniformity of the pump absorption. Finally, a proof-of-principle experiment is performed in short linear cavity laser with single laser module. A continuous-wave output power of 658 W at 1064 nm is obtained, the corresponding optical-to-optical efficiency is 52.6%, and the power variations are ±0.7% over 400 s and ±3.1% over the temperature range from 16 ℃ to 26 ℃. To the best of our knowledge, this is the highest output power and the highest optical-to-optical efficiency ever reported for VCSEL pumped solid-state lasers. By inserting a telescopic module into the cavity and optimizing the TEM_(00) mode volume, the average beam quality is measured to be M~2= 1.34 under an output power of 102 W. The experimental results reveal that such a high power rod laser module with temperature stability is appropriate for field applications.展开更多
In this paper, according to the temperature and strain distribution obtained by considering the Gaussian pump profile and dependence of physical properties on temperature, we derive an analytical model for refractive ...In this paper, according to the temperature and strain distribution obtained by considering the Gaussian pump profile and dependence of physical properties on temperature, we derive an analytical model for refractive index variations of the diode side-pumped Nd：YAG laser rod. Then we evaluate this model by numerical solution and our maximum relative errors are 5% and 10% for variations caused by thermo–optical and thermo–mechanical effects; respectively. Finally, we present an analytical model for calculating the focal length of the thermal lens and spherical aberration. This model is evaluated by experimental results.展开更多
We propose and demonstrate a simple approach to lower the thermal quenching effect and improve the output power of Cr：LiSAF lasers, which is accomplished by employing two laser rods. The resonator contains two laser ...We propose and demonstrate a simple approach to lower the thermal quenching effect and improve the output power of Cr：LiSAF lasers, which is accomplished by employing two laser rods. The resonator contains two laser rods and is designed by using two ＂X＂ folding cavities in cascade. A tunable laser output of ～ 180 mW has been achieved with the pump of single-striped laser diodes. Compared with lasers using single gain rod, the laser with dual rods shows less severe thermal effect and increases the output by more than two times.展开更多
A narrow linewidth stable high-power continuous-wave 3.5% Tin3＋ doped LiYF4 （Tm：YLF） laser is reported. By using dual F P etalons and three Tm：YLF rods in a cavity, laser output of ~60 W at 1907.7nm is obtained w...A narrow linewidth stable high-power continuous-wave 3.5% Tin3＋ doped LiYF4 （Tm：YLF） laser is reported. By using dual F P etalons and three Tm：YLF rods in a cavity, laser output of ~60 W at 1907.7nm is obtained with a slope efficiency of 34.8%. The M2 factor is found to be ~2.0 under an output power of 30 W. In addition, the relaxation oscillation and efficiency of the Tm：YLF laser are also studied. The relaxation oscillation of the Tm：YLF laser is improved obviously by setting the ratio of pump beam to oscillating laser beam as ~1.5：1 and the efficiency is increased in comparison with the ratio of ~1.3：1.展开更多
A comparative study on the laser performance between bonding and non-bonding Er,Pr:GYSGG rods side-pumped by 970-nm laser diodes(LDs) is conducted for the thermal lensing compensation. The analyses of the thermal dist...A comparative study on the laser performance between bonding and non-bonding Er,Pr:GYSGG rods side-pumped by 970-nm laser diodes(LDs) is conducted for the thermal lensing compensation. The analyses of the thermal distribution and thermal focal length show that the bonding rod possesses a high cooling efficiency and weak thermal lensing effect compared with the conventional Er,Pr:GYSGG rod. Moreover, the laser characteristics of maximum output power, slope efficiency, and laser beam quality of the bonding rod with concave end-faces operated at 2.79 μm are improved under the high-repetition-rate operation. A maximum output power of 13.96 W is achieved at 150-Hz and 200-μs pulse width,corresponding to a slope efficiency of 17.7% and an electrical-to-optical efficiency of 12.9%. All results suggest that the combination of thermal bonding and concave end-face is a suitable structure for thermal lensing compensation.展开更多
A yellow continuous wave with beam quality M^2= 4.6 and output power of 4.8 W at 589nm is generated by intracavity sum-frequency mixing of 1064 nm and 1319 nm radiations of a Nd：YAG laser. To achieve high beam qualit...A yellow continuous wave with beam quality M^2= 4.6 and output power of 4.8 W at 589nm is generated by intracavity sum-frequency mixing of 1064 nm and 1319 nm radiations of a Nd：YAG laser. To achieve high beam quality at high power, thermally near-unstable flat-flat resonators with two-rod birefringence compensation are designed to obtain the large fundamental mode size inside the Nd：YAG rods and the same beam width inside the KTP crystal. The optimal intracavity power ratio of both 1064nm and 1319nm beams is also considered. The output power fluctuation of the yellow laser remains less than 5% in four hours.展开更多
We report a high-peak-power, single-polarized master oscillator power amplification system employing polarization- maintaining Yb-doped rod-type photonic crystal fiber. The MOPA system comprises of a Q-switched microc...We report a high-peak-power, single-polarized master oscillator power amplification system employing polarization- maintaining Yb-doped rod-type photonic crystal fiber. The MOPA system comprises of a Q-switched microchip laser generating ~630ps pulses at 8.6 kHz repetition-rate and two amplification stages employing double cladding fiber and rod-type PCF respectively. The MOPA system obtains narrow spectral bandwidth, single-polarized pulses of 9W maximum output average power, corresponding to peak power of 1.7MW.展开更多
We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite cera...We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite ceramic Nd：YAG crystal is numerically analyzed and compared with that of conventional Nd：YAG crystal. By using a composite ceramic Nd：YAG rod and a type-II high gray track resistance KTP （HGTR-KTP） crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd：YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.展开更多
文摘A high-efficiency and high-power vertical-cavity surface-emitting laser(VCSEL) side-pumped rod Nd:YAG laser with temperature adaptability are demonstrated. The VCSEL side-pumped laser module is designed and optimized. Five VCSEL arrays are symmetrically located around the laser rod and a large size diffused reflection chamber is designed to ensure a uniform pump distribution. Furthermore, the absorbed pump power distribution of the rod is simulated to verify the uniformity of the pump absorption. Finally, a proof-of-principle experiment is performed in short linear cavity laser with single laser module. A continuous-wave output power of 658 W at 1064 nm is obtained, the corresponding optical-to-optical efficiency is 52.6%, and the power variations are ±0.7% over 400 s and ±3.1% over the temperature range from 16 ℃ to 26 ℃. To the best of our knowledge, this is the highest output power and the highest optical-to-optical efficiency ever reported for VCSEL pumped solid-state lasers. By inserting a telescopic module into the cavity and optimizing the TEM_(00) mode volume, the average beam quality is measured to be M~2= 1.34 under an output power of 102 W. The experimental results reveal that such a high power rod laser module with temperature stability is appropriate for field applications.
文摘In this paper, according to the temperature and strain distribution obtained by considering the Gaussian pump profile and dependence of physical properties on temperature, we derive an analytical model for refractive index variations of the diode side-pumped Nd：YAG laser rod. Then we evaluate this model by numerical solution and our maximum relative errors are 5% and 10% for variations caused by thermo–optical and thermo–mechanical effects; respectively. Finally, we present an analytical model for calculating the focal length of the thermal lens and spherical aberration. This model is evaluated by experimental results.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10376009 and 60538010） and the program of Shanghai 0ptical Science and Technology, China （Grant No 012261065）.
文摘We propose and demonstrate a simple approach to lower the thermal quenching effect and improve the output power of Cr：LiSAF lasers, which is accomplished by employing two laser rods. The resonator contains two laser rods and is designed by using two ＂X＂ folding cavities in cascade. A tunable laser output of ～ 180 mW has been achieved with the pump of single-striped laser diodes. Compared with lasers using single gain rod, the laser with dual rods shows less severe thermal effect and increases the output by more than two times.
文摘A narrow linewidth stable high-power continuous-wave 3.5% Tin3＋ doped LiYF4 （Tm：YLF） laser is reported. By using dual F P etalons and three Tm：YLF rods in a cavity, laser output of ~60 W at 1907.7nm is obtained with a slope efficiency of 34.8%. The M2 factor is found to be ~2.0 under an output power of 30 W. In addition, the relaxation oscillation and efficiency of the Tm：YLF laser are also studied. The relaxation oscillation of the Tm：YLF laser is improved obviously by setting the ratio of pump beam to oscillating laser beam as ~1.5：1 and the efficiency is increased in comparison with the ratio of ~1.3：1.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51872290,51702322,and 51802307)the National Key Research and Development Program of China(Grant No.2016YFB1102301)
文摘A comparative study on the laser performance between bonding and non-bonding Er,Pr:GYSGG rods side-pumped by 970-nm laser diodes(LDs) is conducted for the thermal lensing compensation. The analyses of the thermal distribution and thermal focal length show that the bonding rod possesses a high cooling efficiency and weak thermal lensing effect compared with the conventional Er,Pr:GYSGG rod. Moreover, the laser characteristics of maximum output power, slope efficiency, and laser beam quality of the bonding rod with concave end-faces operated at 2.79 μm are improved under the high-repetition-rate operation. A maximum output power of 13.96 W is achieved at 150-Hz and 200-μs pulse width,corresponding to a slope efficiency of 17.7% and an electrical-to-optical efficiency of 12.9%. All results suggest that the combination of thermal bonding and concave end-face is a suitable structure for thermal lensing compensation.
基金Supported by the National Natural Science Foundation of China under Grant No 60508013, and the Knowledge Innovation Programme of Chinese Academy of Sciences under Grant No KJCX1-05.
文摘A yellow continuous wave with beam quality M^2= 4.6 and output power of 4.8 W at 589nm is generated by intracavity sum-frequency mixing of 1064 nm and 1319 nm radiations of a Nd：YAG laser. To achieve high beam quality at high power, thermally near-unstable flat-flat resonators with two-rod birefringence compensation are designed to obtain the large fundamental mode size inside the Nd：YAG rods and the same beam width inside the KTP crystal. The optimal intracavity power ratio of both 1064nm and 1319nm beams is also considered. The output power fluctuation of the yellow laser remains less than 5% in four hours.
文摘We report a high-peak-power, single-polarized master oscillator power amplification system employing polarization- maintaining Yb-doped rod-type photonic crystal fiber. The MOPA system comprises of a Q-switched microchip laser generating ~630ps pulses at 8.6 kHz repetition-rate and two amplification stages employing double cladding fiber and rod-type PCF respectively. The MOPA system obtains narrow spectral bandwidth, single-polarized pulses of 9W maximum output average power, corresponding to peak power of 1.7MW.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61107086, 61172010, and 61101058)the Science and Technology Committee of Tianjin, China (Grant No. 11JCYBJC01100)the National High Technology Research and Development Program of China (Grant No. 2011AA010205)
文摘We successfully obtain a high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd：YAG in a straight piano-concave cavity. The temperature distribution in composite ceramic Nd：YAG crystal is numerically analyzed and compared with that of conventional Nd：YAG crystal. By using a composite ceramic Nd：YAG rod and a type-II high gray track resistance KTP （HGTR-KTP） crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd：YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.
