In repeated zero-sum games,instead of constantly playing an equilibrium strategy of the stage game,learning to exploit the opponent given historical interactions could typically obtain a higher utility.However,when pl...In repeated zero-sum games,instead of constantly playing an equilibrium strategy of the stage game,learning to exploit the opponent given historical interactions could typically obtain a higher utility.However,when playing against a fully adaptive opponent,one would have dificulty identifying the opponent's adaptive dynamics and further exploiting its potential weakness.In this paper,we study the problem of optimizing against the adaptive opponent who uses no-regret learning.No-regret learning is a classic and widely-used branch of adaptive learning algorithms.We propose a general framework for online modeling no-regret opponents and exploiting their weakness.With this framework,one could approximate the opponent's no-regret learning dynamics and then develop a response plan to obtain a significant profit based on the inferences of the opponent's strategies.We employ two system identification architectures,including the recurrent neural network(RNN)and the nonlinear autoregressive exogenous model,and adopt an efficient greedy response plan within the framework.Theoretically,we prove the approximation capability of our RNN architecture at approximating specific no-regret dynamics.Empirically,we demonstrate that during interactions at a low level of non-stationarity,our architectures could approximate the dynamics with a low error,and the derived policies could exploit the no-regret opponent to obtain a decent utility.展开更多
In this study,AZ31 Mg alloy sheets were processed by a severe plastic deformation(SPD)technique called forging-bending repeated deformation(FBRD).The effect on the microstructure and microhardness of AZ31 Mg alloy thr...In this study,AZ31 Mg alloy sheets were processed by a severe plastic deformation(SPD)technique called forging-bending repeated deformation(FBRD).The effect on the microstructure and microhardness of AZ31 Mg alloy through FBRD was investigated with increasing temperature treatment and a 90°cross route.The results reveal that the effective strain increases with the number of passes.The flow uniformity is effectively enhanced due to alterations in shear deformation direction.After four passes of deformation,the average grain size is refined by 79.3%compared to the initial specimen.The grain refinement mechanism predominantly originates from the synergistic effects of discontinuous dynamic recrystallization(DDRX),continuous dynamic recrystallization(CDRX),and twinning-induced recrystallization(TDRX).The formation of{1012}extension twins(ET)significantly contributes to coarse grain subdivision and plastic deformation coordinated.Furthermore,pyramidal<c+a>slip activation effectively enhances the plasticity of Mg alloys.By post four-pass processing,the alloy exhibits a microhardness of 81.9HV,primarily governed by fine grain strengthening and dislocation strengthening mechanisms.展开更多
The reuse of green sand in casting production is hindered by the accumulation of oolitic deposits,primarily composed of clay binder with surface degradation,which may adversely affect the the moulding sand performance...The reuse of green sand in casting production is hindered by the accumulation of oolitic deposits,primarily composed of clay binder with surface degradation,which may adversely affect the the moulding sand performance.Currently,there is a lack of standardized methods for quantifying the oolitic content.Accurate measurement of oolitic content is of great significance to the reuse of green sand.Attempts to determine oolitic content using potassium hydroxide(KOH)and phosphoric acid(H_(3)PO_(4))methods encounter challenges due to their excessive reactions with SiO_(2) in the sand.In this study,an improved method for measuring the oolitic content of green sand with repeated approximations was proposed.This method judges the chemical activity of the sample surface through the change of its mass to accurately obtain the mass of the reaction oolitic deposits.The test result of the used sand samples from the foundry shows that the oolitic deposits are completely removed after reacting with KOH solution three times at 300℃ for 20 min.SEM and EDS also show that after three times of reactions,the surface of green sand becomes smooth and the content of Al-containing oolitic deposits is very low.This indicates that the method can accurately control the extent of the reaction.Implementation of this method at Huangshi Dongbei Casting Co.,Ltd.has yielded consistent and reliable test results,effectively mirroring variations in green sand oolitic content on the production line.This new method is expected to be widely adopted to improve the efficiency and quality of reused green sand in casting operations.展开更多
Both the repeated triaxial test （RTT） and the Hamburg wheel tracking test （HWTT） are adopted to evaluate the high temperature performance of the stone mastic asphalt （SMA） and the mastic asphalt （MA）. The corr...Both the repeated triaxial test （RTT） and the Hamburg wheel tracking test （HWTT） are adopted to evaluate the high temperature performance of the stone mastic asphalt （SMA） and the mastic asphalt （MA）. The correlation of the permanent deformations of the MA and the correlation of the deformation developments of the SMA between the two tests are analyzed, respectively. Results show that both the two tests can effectively identify the high temperature performance of mixtures, and the correlation between the final results of the two tests as well as that between the deformation developments of the two tests are excellent with R20.9. In order to further prove the correlation, viscoelastic parameters estimated from the RTT results is used to simulate the rutting development in the HWTT slabs by the finite element method （FEM）. Results indicate that the correlation between the two tests is significant with errors less than 10%. It is suitable to predict the rutting development with the viscoelastic parameters obtained from the RTT.展开更多
The high resolution Terra SAR-X dataset was employed with DIn SAR and persistent scatterer interferometry（PSI） technique for subsidence monitoring in a mountainous area. For DInS AR technique, the generally used SRT...The high resolution Terra SAR-X dataset was employed with DIn SAR and persistent scatterer interferometry（PSI） technique for subsidence monitoring in a mountainous area. For DInS AR technique, the generally used SRTM and relief-DEM, which was derived from aerial topographic map, were used to evaluate the influence of external DEM. The results show that SRTM could not fully compensate the complex topography of the research area. The corner reflectors installed during the acquisition of SAR dataset were used to estimate the accuracy of geocoding. The terrain corrected geocoding results based on relief-DEM were much better than using SRTM, with the root mean square error（RMSE） being 6.35 m in X direction and 11.65 m in Y direction（both in UTM projection）, around one pixel of the multilooked intensity image to be geocoded. For PSI technique, the results from time-series analysis of multi-baseline differential interferograms were integrated to restrict only persistent scatterer candidates near the boundary of subsiding area for regression analysis. The results demonstrate that PSI can refine the boundary of subsidence, which could then be used to derive some angular parameters to help people to learn the law of subsidence caused by repeated excavation in this area.展开更多
The series-wound dashpot of the Burgers model is modified by introducing the strain hardening parameter, and the new model is considered as a combination of the modified dashpot and the Van Der Poel model. The cyclica...The series-wound dashpot of the Burgers model is modified by introducing the strain hardening parameter, and the new model is considered as a combination of the modified dashpot and the Van Der Poel model. The cyclical pulse load consisting of a haversine load time and a rest period is adopted to simulate the actual vehicle load, and the permanent strain model under the repeated load is derived from the rheological and viscoelastic theories. Subsequently, the model is validated by the results of uniaxial repeated load permanent deformation tests of three asphalt mixtures. It is indicated that the proportion of residual viscoelastic strain to permanent strain decreases gradually with the load cycles, and only accounts for 2% to 3% during most of the loading period. If the rest period is long, the residual viscoelastic strain is little. The rest period of the actual vehicle load may be long enough, so the residual viscoelasticity can be ignored and the simplified model can be obtained. The proposed model can well describe the permanent deformation of asphalt mixtures under repeated load.展开更多
The feasibility of using different generations of recycled fine aggregate（RFA） in structural concrete in a chloride environment was evaluated by studying the performance of the RFA and the corresponding concrete. Th...The feasibility of using different generations of recycled fine aggregate（RFA） in structural concrete in a chloride environment was evaluated by studying the performance of the RFA and the corresponding concrete. The different generations of RFA were recycled by following the cycle of ‘concrete-waste concrete-fine aggregate-concrete＇. The properties of three generations of repeatedly recycled fine aggregate（RRFA） were systematically investigated, and we focused on the compressive strength and splitting tensile strength and chloride ion permeability of the related structural concretes with 25%, 75%, and 100% replacement of natural fine aggregates with RFA. The results indicated that the quality of RRFA presents a trend of slow deterioration, but the overall performance of all RRFA still fulfils the quality requirements of recycled fine aggregate for structural concrete. All RRFA concretes achieved the target compressive strength of 40 MPa after 28 days except for the second generation of the recycled aggregate concrete and the third generation of the recycled aggregate concrete with 100% replacement, and all the concrete mixes achieved the target compressive strength after 90 days. The insights obtained in this study demonstrate the feasibility of using at least three generations of RRFA for the production of normal structural concrete with a design service life of 100 years in a chloride environment.展开更多
A new electrocardiogram(ECG) data compression method is presented.It employs a repeated coding.In this method beat templates are extracted from original signals according to the features of ECG.The data are divided in...A new electrocardiogram(ECG) data compression method is presented.It employs a repeated coding.In this method beat templates are extracted from original signals according to the features of ECG.The data are divided into three parts:beat template,residual and position parameter.The three separate parts are first encoded with LADT,and then use the lossless entropy encoding to maintain a low level of reconstructed waveform distortion.The entropy encoding based on Huffman encoding is employed here as an example.Selections from the MIT BIH arrhythmia database,show that there is substantial improvement in compression ratio (CR) over other single and simple compression methods for comparable percent root mean square difference(PRD).展开更多
The paper attempts to represent a case of repeated failures on a high cut slope due to multi-excavation. The characteristics of each failure induced by excavation are analyzed through geological investigation, and the...The paper attempts to represent a case of repeated failures on a high cut slope due to multi-excavation. The characteristics of each failure induced by excavation are analyzed through geological investigation, and then a geological model at different failure stages is proposed. The geological analysis shows that the excavation-induced repeated failures are related to the exposure of the weak bedding plane and the toe unloading of the cut slope, Numerical modeling is conducted based on a sequential method, taking into account the main failure stages of cut slope. The simulation results fairly coincide with the practical phenomena observed in field. It is shown that the decrease in normal stress of displaced mass on cut slope will induce the increase in shear stress in bedding planes and that at the toe of the cut slope. The released stress leads to repeated gravitational instabilities of cut slope due to the decrease in normal stress and the increase in shear stress along the bedding planes of mudstone.展开更多
Objective The present study was undertaken to evaluate the subchronic toxicity of lanthanum and to determine the no observed adverse effect level（NOAEL）,which is a critical factor in the establishment of an acceptab...Objective The present study was undertaken to evaluate the subchronic toxicity of lanthanum and to determine the no observed adverse effect level（NOAEL）,which is a critical factor in the establishment of an acceptable dietary intake（ADI）.Methods In accordance with the Organization for Economic Co-operation and Development（OECD） testing guidelines,lanthanum nitrate was administered once daily by gavage to Sprague-Dawley（SD） rats at dose levels of 0,1.5,6.0,24.0,and 144.0 mg/kg body weight（BW） per day for 90 days,followed by a recovery period of 4 weeks in the 144.0 mg/kg BW per day and normal control groups.Outcome parameters were mortality,clinical symptoms,body and organ weights,serum chemistry,and food consumption,as well as ophthalmic,urinary,hematologic,and histopathologic indicators.The benchmark dose（BMD） approach was applied to estimate a point of departure for the hazard risk assessment of lanthanum.Results Significant decreases were found in the 144.0 mg/kg BW group in the growth index,including body weight,organ weights,and food consumption.This study suggests that the NOAEL of lanthanum nitrate is 24.0 mg/kg BW per day.Importantly,the 95% lower confidence value of the benchmark dose（BMDL） was estimated as 9.4 mg/kg BW per day in females and 19.3 mg/kg BW per day in males.Conclusion The present subchronic oral exposure toxicity study may provide scientific data for the risk assessment of lanthanum and other rare earth elements（REEs）.展开更多
Carbendazim, a systemic benzimidazole fungicide, is applied repeatedly to control plant diseases including soilborne diseases, over a growing season. Studies were carried out under laboratory conditions to assess the ...Carbendazim, a systemic benzimidazole fungicide, is applied repeatedly to control plant diseases including soilborne diseases, over a growing season. Studies were carried out under laboratory conditions to assess the effects of repeated carbendazim applications on its persistence and microbial community in soil. The results indicate that dissipation of carbendazim in soil was accelerated with its application frequency. The degradation rate constant of carbendazim was increased significantly from 0.074 d-1 to 0.79 d-1. The corresponding half-life was shorten markedly from 9.3 d to 0.9 d after four repeated applications. No significant inhibitory effect of carbendazim on soil microbial utilization of the carbon sources was observed after first treatment, but a slight increase in average well color development （AWCD） was shown after second, third, and fourth applications. It suggested that soil microorganisms become adapted to carbendazim after repeated application. Simpson and Shannon indexes of soil microbial community from carbendazim treated soil were also similar to those from the control soil, indicating that the richness and dominant character of soil microorganisms remain unchangeable after repeated application. However, after first, second, and third addition of carbendazim, McIntosh indexes on day 21 were significantly higher compared with the control, suggesting that balance of soil microorganisms was altered due to the enrichment of the specific carbendazim-adapting strains in soil展开更多
In this study, we compared the effects of repeated freezing/thawing of human sperm by our in-house method of rapid freezing with slow programmable freezing. Sperm samples from 11 normozoospermic subjects were processe...In this study, we compared the effects of repeated freezing/thawing of human sperm by our in-house method of rapid freezing with slow programmable freezing. Sperm samples from 11 normozoospermic subjects were processed through density gradients and divided into three aliquots： non-frozen, rapid freezing and slow programmable freezing. Sperm in the rapid freezing group had better motility and viability than those in the slow freezing group （P〈O.01） after the first, second and third cycles of freezing/thawing, but there was no difference in morphology. In the second experiment, rapid freezing was repeated three times in 20 subjects. The samples from each thawing cycle were evaluated for DNA fragmentation using the alkaline comet assay. DNA fragmentation began to increase considerably after the second cycle of freezing/thawing, but to a level that was not clinically important. In the third experiment, rapid freezing was done repeatedly in 10 subjects, until no motile sperm were observed after thawing. The median number of repeated freezing/thawing that yielded no motile sperm was seven （range： 5-8, mean： 6.8）. In conclusion, we demonstrated that repeated freezing/thawing of processed semen using our rapid freezing method gave better results than standard slow programmable freezing. This method can help maximize the usage of precious cryopreserved sperm samples in assisted reproduction technology.展开更多
Repeatedly unidirectional bending(RUB) was applied to the magnesium alloy sheet to improve the basal texture.The effect of RUB temperature on resulting structure and room temperature properties was investigated.The te...Repeatedly unidirectional bending(RUB) was applied to the magnesium alloy sheet to improve the basal texture.The effect of RUB temperature on resulting structure and room temperature properties was investigated.The texture components of the sheet undergoing RUB at recovery temperature were similar to those of the sheet undergoing RUB at room temperature(RT).As the RUB temperature increased to above recrystallization temperature,the texture components became more disperse and the pyramidal components increased.With the increase of RUB temperature,the grain size near the surface of the sheets undergoing RUB tended to grow up.When the sheets were processed by RUB at medium-high temperature followed by annealing at 533 K,the yield strength and fracture elongation were lower than those of the cold rolled sheet;however,the Erichsen value was slightly higher than that of the cold rolled sheet.The sheet undergoing RUB at RT followed by annealing at 533 K represented the best mechanical properties.展开更多
The mechanical behaviors and energy dissipation characteristics of heat-treated granite were investigated under repeated impact loading.The granite samples were firstly heat-treated at the temperature of 20℃,200℃,40...The mechanical behaviors and energy dissipation characteristics of heat-treated granite were investigated under repeated impact loading.The granite samples were firstly heat-treated at the temperature of 20℃,200℃,400℃,and 600℃,respectively.The thermal damage characteristics of these samples were then observed and measured before impact tests.Dynamic impact compression tests finally were carried out using a modified split-Hopkinson pressure bar under three impact velocities of 12 m/s,15 m/s,and 18 m/s.These test results show that the mineral composition and the main oxides of the granite do not change with these treatment temperatures.The number of microcracks and microvoids decreases in the sample after 200℃ treatment.The mechanical properties of a sample after 600℃ treatment were rapidly deteriorated under the same impact velocity.The average of peak stress is much smaller than those after 20℃,200℃ and 400℃ treatments.The heat-treated samples have an energy threshold each.When the dissipated energy of a sample under a single impact is less than this threshold,the repeated impacts hardly lead to further damage accumulation even if its total breakage energy dissipation(BED)density is large.Under the same number of repeated impacts,the cumulative BED density of a sample after 600℃ treatment is the largest and its damage evolves most quickly.The total BED density of the sample after 200℃ treatment is the highest,which implies that this sample has better resistance to repeated impact,thus having less crack initiation and growth.展开更多
In China, most oil fields are continental sedimentation with strong heterogeneity, which on one side makes the reservoir prospecting and development more difficult, but on the other side provides more space for search...In China, most oil fields are continental sedimentation with strong heterogeneity, which on one side makes the reservoir prospecting and development more difficult, but on the other side provides more space for searching residual oil in matured fields. Time-lapse seismic reservoir monitoring technique is one of most important techniques to define residual oil distribution. According to the demand for and development of time-lapse seismic reservoir monitoring in China, purposeless repeated acquisition time-lapse seismic data processing was studied. The four key steps in purposeless repeated acquisition time-lapse seismic data processing, including amplitude-preserved processing with relative consistency, rebinning, match filtering and difference calculation, were analyzed by combining theory and real seismic data processing. Meanwhile, quality control during real time-lapse seismic processing was emphasized.展开更多
In the recent past,the potential benefits of wraparound geosynthetic reinforcement technique for constructing the reinforced soil foundations have been reported.This paper presents the experimental study on the behavi...In the recent past,the potential benefits of wraparound geosynthetic reinforcement technique for constructing the reinforced soil foundations have been reported.This paper presents the experimental study on the behaviour of model strip footing resting on sandy soil bed reinforced with geosynthetic in wraparound and planar forms under monotonic and repeated loadings.The geosynthetic layers were laid according to the reinforcement ratio to minimise the scale effect.It is found that for the same amount of reinforcement material,the wraparound reinforced model resulted in less settlement in comparison to planar reinforced models.The efficiency of wraparound reinforced model increased with the increase in load amplitude and the rate of total cumulative settlement substantially decreased with the increase in number of load cycles.The wraparound reinforced model has shown about 45% lower average total settlement in comparison to unreinforced model,while the double-layer reinforced model has about 41% lower average total settlement at the cost of approximately twice the material and 1.5 times the occupied land width ratio.Moreover,wraparound models have shown much greater stability in comparison to their counterpart models when subjected to incremental repeated loading.展开更多
A new repeated upsetting-extrusion (RUE) process was proposed to improve the microstructure and the mechanical properties of Mg alloys. The effects of deformation temperature on the microstructure and microhardness of...A new repeated upsetting-extrusion (RUE) process was proposed to improve the microstructure and the mechanical properties of Mg alloys. The effects of deformation temperature on the microstructure and microhardness of RUEed AQ80 Mg alloy were studied. The results showed that Mg alloy is subjected to sufficient corner shear deformation, upsetting deformation, and extrusion deformation, resulting in a large and uniformly distributed effective strain after RUE deformation. The microstructure is refined to an average grain size of 2.1 μm by the continuous dynamic recrystallization (CDRX) mechanism at 250 °C. As the temperature increases to 300 °C, the discontinuous dynamic recrystallization (DDRX) mechanism is activated and the average grain size is refined to 1.6 µm by the combined effect of CDRX and DDRX. In comparison to their parent grains, the orientations of the CDRXed grains show a clearly preferred orientation, but those of the DDRXed grains are completely different. At 350 °C, {10-12} extension twins appear in the microstructure, and the twinning-induced recrystallization (TDRX) mechanism plays an important role in grain refinement. With the two strengthening mechanisms of fine-grained strengthening and dislocation strengthening, the microhardness of the 250 °C sample is greatly improved, with an increase of about 35.1% compared to the initial sample.展开更多
Practical assessment of subgrade settlement induced by train operation requires developing suitable models capable of describing permanent deformation characteristics of subgrade filling under repeated dynamic loading...Practical assessment of subgrade settlement induced by train operation requires developing suitable models capable of describing permanent deformation characteristics of subgrade filling under repeated dynamic loading.In this paper,repeated load triaxial tests were performed on coarse-grained soil(CGS),and the axial permanent strain of CGS under different confining pressures and dynamic stress amplitudes was analysed.Permanent deformation behaviors of CGS were categorized based on the variation trend of permanent strain rate with accumulated permanent strain and the shakedown theory.A prediction model of permanent deformation considering stress state and number of load cycles was established,and the ranges of parameters for different types of dynamic behaviors were also divided.The results indicated that the variational trend of permanent strain rate with accumulated permanent strain can be used as a basis for classifying dynamic behaviors of CGS.The stress state(confining pressure and dynamic stress amplitude)has significant effects on the permanent strain rate.The accumulative characteristics of permanent deformation of CGS with the number of load cycles can be described by a power function,and the model parameters can reflect the influence of confining pressure and dynamic stress amplitude.The study’s results could help deepen understanding of the permanent deformation characteristics of CGS.展开更多
BACKGROUND Polyacrylamide hydrogel(PAAG)injections were once common in breast augmentation and have been prohibited for augmentation mammaplasty in China since a large number of patients who underwent breast augmentat...BACKGROUND Polyacrylamide hydrogel(PAAG)injections were once common in breast augmentation and have been prohibited for augmentation mammaplasty in China since a large number of patients who underwent breast augmentation with PAAG injections have continued to seek medical advice as a result of related complications.Among all these complications,distant migration is relatively rare.CASE SUMMARY A 49-year-old female presented at the hospital with a one-year history of a vulvar lump.The sonography of the lump showed several subcutaneous fluid-filled regions from the left vulva to the pubic symphysis,which suggested possible fat liquefaction.An enhanced magnetic resonance imaging(MRI)revealed a cystic area,which was considered a benign lesion.Intraoperative observations showed that the mass did not have an obvious capsule,the subcutaneous tissue presented as a cavity,and some yellow material came out of this cavity.A culture of the drainage did not show bacterial contamination.Histopathology revealed a foreign body granuloma.After resection and closed drainage,lumps were successively observed in the left lower abdomen and the bilateral hypochondriac region with infections.Sonography found that the hypoechoic areas in the bilateral hypochondriac region seemed continuous with deep in the breasts.The patient reported that she had undergone surgery with PAAG injections 20 years ago after she was repeatedly asked about her past history.Finally,a diagnosis of distant migration of PAAG was made.CONCLUSION PAAG gel can migrate after long periods of time.A diagnosis should not be limited to the area where the symptom develops.展开更多
Long-term gonadotropin-releasing hormone agonist（Gn RHa） administration before in vitro fertilization（IVF）/intracytoplasmic sperm injection（ICSI） in infertile women with endometriosis or adenomyosis significantl...Long-term gonadotropin-releasing hormone agonist（Gn RHa） administration before in vitro fertilization（IVF）/intracytoplasmic sperm injection（ICSI） in infertile women with endometriosis or adenomyosis significantly enhanced the chances of pregnancy in both fresh and frozen embryo transfer cycles. We hypothesized that long-term Gn RHa treatment might also be beneficial for the idiopathic repeated implantation failure（RIF） patients. In the 21 patients receiving Gn RHa and hormone replacement therapy（G-HRT） protocols for frozen embryo transfer, their data were compared with those of the 56 of frozen/fresh cycles they had previously undergone（previous protocols）. Comparison showed that the finial results were significantly better with G-HRT protocols than with their previous protocols, with pregnancy rate, clinical pregnancy rate, implantation rate and on-going pregnancy rate being 70%, 60%, 40% and 38% respectively with G-HRT protocols, against 17%, 11%, 6.3% and 5% with previous protocols. The results showed that hormonally controlled endometrial preparation with prior Gn RHa suppression could be used for patients who had experienced repeated failures of IVF treatment despite having morphologically optimal embryos, and the treatment may help increase the receptivity of the endometrium in these patients.展开更多
基金the Science and Technology Innovation 2030-"New Generation Artificial Intelligence"Major Project(No.2018AAA0100901)。
文摘In repeated zero-sum games,instead of constantly playing an equilibrium strategy of the stage game,learning to exploit the opponent given historical interactions could typically obtain a higher utility.However,when playing against a fully adaptive opponent,one would have dificulty identifying the opponent's adaptive dynamics and further exploiting its potential weakness.In this paper,we study the problem of optimizing against the adaptive opponent who uses no-regret learning.No-regret learning is a classic and widely-used branch of adaptive learning algorithms.We propose a general framework for online modeling no-regret opponents and exploiting their weakness.With this framework,one could approximate the opponent's no-regret learning dynamics and then develop a response plan to obtain a significant profit based on the inferences of the opponent's strategies.We employ two system identification architectures,including the recurrent neural network(RNN)and the nonlinear autoregressive exogenous model,and adopt an efficient greedy response plan within the framework.Theoretically,we prove the approximation capability of our RNN architecture at approximating specific no-regret dynamics.Empirically,we demonstrate that during interactions at a low level of non-stationarity,our architectures could approximate the dynamics with a low error,and the derived policies could exploit the no-regret opponent to obtain a decent utility.
基金Project(52174362)supported by the National Natural Science Foundation of ChinaProject(2023JJ10020)supported by the Natural Science Foundation of Hunan Province,China+2 种基金Project(2024RC7002)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProject(2024CY2-GJHX-71)supported by the Shaanxi Provincial Key R&D Program,ChinaProject supported by the Yancheng“Talent Plan of Yellow Sea Pearl”for Leading Talent Project,China。
文摘In this study,AZ31 Mg alloy sheets were processed by a severe plastic deformation(SPD)technique called forging-bending repeated deformation(FBRD).The effect on the microstructure and microhardness of AZ31 Mg alloy through FBRD was investigated with increasing temperature treatment and a 90°cross route.The results reveal that the effective strain increases with the number of passes.The flow uniformity is effectively enhanced due to alterations in shear deformation direction.After four passes of deformation,the average grain size is refined by 79.3%compared to the initial specimen.The grain refinement mechanism predominantly originates from the synergistic effects of discontinuous dynamic recrystallization(DDRX),continuous dynamic recrystallization(CDRX),and twinning-induced recrystallization(TDRX).The formation of{1012}extension twins(ET)significantly contributes to coarse grain subdivision and plastic deformation coordinated.Furthermore,pyramidal<c+a>slip activation effectively enhances the plasticity of Mg alloys.By post four-pass processing,the alloy exhibits a microhardness of 81.9HV,primarily governed by fine grain strengthening and dislocation strengthening mechanisms.
基金financially supported by the National Key Research and Development Program of China(Grant No.2022YFB3706800)the National Natural Science Foundation of China(Grant Nos.51905188 and 51775205).
文摘The reuse of green sand in casting production is hindered by the accumulation of oolitic deposits,primarily composed of clay binder with surface degradation,which may adversely affect the the moulding sand performance.Currently,there is a lack of standardized methods for quantifying the oolitic content.Accurate measurement of oolitic content is of great significance to the reuse of green sand.Attempts to determine oolitic content using potassium hydroxide(KOH)and phosphoric acid(H_(3)PO_(4))methods encounter challenges due to their excessive reactions with SiO_(2) in the sand.In this study,an improved method for measuring the oolitic content of green sand with repeated approximations was proposed.This method judges the chemical activity of the sample surface through the change of its mass to accurately obtain the mass of the reaction oolitic deposits.The test result of the used sand samples from the foundry shows that the oolitic deposits are completely removed after reacting with KOH solution three times at 300℃ for 20 min.SEM and EDS also show that after three times of reactions,the surface of green sand becomes smooth and the content of Al-containing oolitic deposits is very low.This indicates that the method can accurately control the extent of the reaction.Implementation of this method at Huangshi Dongbei Casting Co.,Ltd.has yielded consistent and reliable test results,effectively mirroring variations in green sand oolitic content on the production line.This new method is expected to be widely adopted to improve the efficiency and quality of reused green sand in casting operations.
基金The Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry (No.6821001005)
文摘Both the repeated triaxial test （RTT） and the Hamburg wheel tracking test （HWTT） are adopted to evaluate the high temperature performance of the stone mastic asphalt （SMA） and the mastic asphalt （MA）. The correlation of the permanent deformations of the MA and the correlation of the deformation developments of the SMA between the two tests are analyzed, respectively. Results show that both the two tests can effectively identify the high temperature performance of mixtures, and the correlation between the final results of the two tests as well as that between the deformation developments of the two tests are excellent with R20.9. In order to further prove the correlation, viscoelastic parameters estimated from the RTT results is used to simulate the rutting development in the HWTT slabs by the finite element method （FEM）. Results indicate that the correlation between the two tests is significant with errors less than 10%. It is suitable to predict the rutting development with the viscoelastic parameters obtained from the RTT.
基金Project(51174191)supported by the National Natural Science Foundation of ChinaProject(2013CB227904)supported by the National Basic Research Program of ChinaProject(2012QNB09)supported by Fundamental Research Funds for the Central Universities,China
文摘The high resolution Terra SAR-X dataset was employed with DIn SAR and persistent scatterer interferometry（PSI） technique for subsidence monitoring in a mountainous area. For DInS AR technique, the generally used SRTM and relief-DEM, which was derived from aerial topographic map, were used to evaluate the influence of external DEM. The results show that SRTM could not fully compensate the complex topography of the research area. The corner reflectors installed during the acquisition of SAR dataset were used to estimate the accuracy of geocoding. The terrain corrected geocoding results based on relief-DEM were much better than using SRTM, with the root mean square error（RMSE） being 6.35 m in X direction and 11.65 m in Y direction（both in UTM projection）, around one pixel of the multilooked intensity image to be geocoded. For PSI technique, the results from time-series analysis of multi-baseline differential interferograms were integrated to restrict only persistent scatterer candidates near the boundary of subsiding area for regression analysis. The results demonstrate that PSI can refine the boundary of subsidence, which could then be used to derive some angular parameters to help people to learn the law of subsidence caused by repeated excavation in this area.
基金The National Natural Science Foundation of China(No50608006)Program for New Century Excellent Talents in University(NoNCET-07-0120)
文摘The series-wound dashpot of the Burgers model is modified by introducing the strain hardening parameter, and the new model is considered as a combination of the modified dashpot and the Van Der Poel model. The cyclical pulse load consisting of a haversine load time and a rest period is adopted to simulate the actual vehicle load, and the permanent strain model under the repeated load is derived from the rheological and viscoelastic theories. Subsequently, the model is validated by the results of uniaxial repeated load permanent deformation tests of three asphalt mixtures. It is indicated that the proportion of residual viscoelastic strain to permanent strain decreases gradually with the load cycles, and only accounts for 2% to 3% during most of the loading period. If the rest period is long, the residual viscoelastic strain is little. The rest period of the actual vehicle load may be long enough, so the residual viscoelasticity can be ignored and the simplified model can be obtained. The proposed model can well describe the permanent deformation of asphalt mixtures under repeated load.
基金Funded by the National Natural Science Foundation of China(No.51278073)State Key Laboratoryfor GeoMechanics and Deep Underground Engineering,China University of Mining&Technology(No.SKLGDUEK1704)
文摘The feasibility of using different generations of recycled fine aggregate（RFA） in structural concrete in a chloride environment was evaluated by studying the performance of the RFA and the corresponding concrete. The different generations of RFA were recycled by following the cycle of ‘concrete-waste concrete-fine aggregate-concrete＇. The properties of three generations of repeatedly recycled fine aggregate（RRFA） were systematically investigated, and we focused on the compressive strength and splitting tensile strength and chloride ion permeability of the related structural concretes with 25%, 75%, and 100% replacement of natural fine aggregates with RFA. The results indicated that the quality of RRFA presents a trend of slow deterioration, but the overall performance of all RRFA still fulfils the quality requirements of recycled fine aggregate for structural concrete. All RRFA concretes achieved the target compressive strength of 40 MPa after 28 days except for the second generation of the recycled aggregate concrete and the third generation of the recycled aggregate concrete with 100% replacement, and all the concrete mixes achieved the target compressive strength after 90 days. The insights obtained in this study demonstrate the feasibility of using at least three generations of RRFA for the production of normal structural concrete with a design service life of 100 years in a chloride environment.
文摘A new electrocardiogram(ECG) data compression method is presented.It employs a repeated coding.In this method beat templates are extracted from original signals according to the features of ECG.The data are divided into three parts:beat template,residual and position parameter.The three separate parts are first encoded with LADT,and then use the lossless entropy encoding to maintain a low level of reconstructed waveform distortion.The entropy encoding based on Huffman encoding is employed here as an example.Selections from the MIT BIH arrhythmia database,show that there is substantial improvement in compression ratio (CR) over other single and simple compression methods for comparable percent root mean square difference(PRD).
基金Supported by the National Natural Science Foundation of China(41072213 and 40801212)the Opening Fund of Key Laboratory of Mechanics on Disaster and Environment in Western China, Lanzhou University(201207)
文摘The paper attempts to represent a case of repeated failures on a high cut slope due to multi-excavation. The characteristics of each failure induced by excavation are analyzed through geological investigation, and then a geological model at different failure stages is proposed. The geological analysis shows that the excavation-induced repeated failures are related to the exposure of the weak bedding plane and the toe unloading of the cut slope, Numerical modeling is conducted based on a sequential method, taking into account the main failure stages of cut slope. The simulation results fairly coincide with the practical phenomena observed in field. It is shown that the decrease in normal stress of displaced mass on cut slope will induce the increase in shear stress in bedding planes and that at the toe of the cut slope. The released stress leads to repeated gravitational instabilities of cut slope due to the decrease in normal stress and the increase in shear stress along the bedding planes of mudstone.
基金supported by China Food Safety Talent Competency Development Initiative:CFSA 523 Programthe National Natural Science Foundation of China[No.81402683]
文摘Objective The present study was undertaken to evaluate the subchronic toxicity of lanthanum and to determine the no observed adverse effect level（NOAEL）,which is a critical factor in the establishment of an acceptable dietary intake（ADI）.Methods In accordance with the Organization for Economic Co-operation and Development（OECD） testing guidelines,lanthanum nitrate was administered once daily by gavage to Sprague-Dawley（SD） rats at dose levels of 0,1.5,6.0,24.0,and 144.0 mg/kg body weight（BW） per day for 90 days,followed by a recovery period of 4 weeks in the 144.0 mg/kg BW per day and normal control groups.Outcome parameters were mortality,clinical symptoms,body and organ weights,serum chemistry,and food consumption,as well as ophthalmic,urinary,hematologic,and histopathologic indicators.The benchmark dose（BMD） approach was applied to estimate a point of departure for the hazard risk assessment of lanthanum.Results Significant decreases were found in the 144.0 mg/kg BW group in the growth index,including body weight,organ weights,and food consumption.This study suggests that the NOAEL of lanthanum nitrate is 24.0 mg/kg BW per day.Importantly,the 95% lower confidence value of the benchmark dose（BMDL） was estimated as 9.4 mg/kg BW per day in females and 19.3 mg/kg BW per day in males.Conclusion The present subchronic oral exposure toxicity study may provide scientific data for the risk assessment of lanthanum and other rare earth elements（REEs）.
基金supported by the National Natural Sci-ence Foundation of China (No. 30771254)the Zhejiang Provincial Natural Science Foundation (No. Z306260)+2 种基金the National Key Technology R&D Program of China (No.2006BAI09B03)Hi-Tech Research and Development Program (863) of China (No. 2007AA06Z306 )the Program for New Century Excellent Talents in University.
文摘Carbendazim, a systemic benzimidazole fungicide, is applied repeatedly to control plant diseases including soilborne diseases, over a growing season. Studies were carried out under laboratory conditions to assess the effects of repeated carbendazim applications on its persistence and microbial community in soil. The results indicate that dissipation of carbendazim in soil was accelerated with its application frequency. The degradation rate constant of carbendazim was increased significantly from 0.074 d-1 to 0.79 d-1. The corresponding half-life was shorten markedly from 9.3 d to 0.9 d after four repeated applications. No significant inhibitory effect of carbendazim on soil microbial utilization of the carbon sources was observed after first treatment, but a slight increase in average well color development （AWCD） was shown after second, third, and fourth applications. It suggested that soil microorganisms become adapted to carbendazim after repeated application. Simpson and Shannon indexes of soil microbial community from carbendazim treated soil were also similar to those from the control soil, indicating that the richness and dominant character of soil microorganisms remain unchangeable after repeated application. However, after first, second, and third addition of carbendazim, McIntosh indexes on day 21 were significantly higher compared with the control, suggesting that balance of soil microorganisms was altered due to the enrichment of the specific carbendazim-adapting strains in soil
文摘In this study, we compared the effects of repeated freezing/thawing of human sperm by our in-house method of rapid freezing with slow programmable freezing. Sperm samples from 11 normozoospermic subjects were processed through density gradients and divided into three aliquots： non-frozen, rapid freezing and slow programmable freezing. Sperm in the rapid freezing group had better motility and viability than those in the slow freezing group （P〈O.01） after the first, second and third cycles of freezing/thawing, but there was no difference in morphology. In the second experiment, rapid freezing was repeated three times in 20 subjects. The samples from each thawing cycle were evaluated for DNA fragmentation using the alkaline comet assay. DNA fragmentation began to increase considerably after the second cycle of freezing/thawing, but to a level that was not clinically important. In the third experiment, rapid freezing was done repeatedly in 10 subjects, until no motile sperm were observed after thawing. The median number of repeated freezing/thawing that yielded no motile sperm was seven （range： 5-8, mean： 6.8）. In conclusion, we demonstrated that repeated freezing/thawing of processed semen using our rapid freezing method gave better results than standard slow programmable freezing. This method can help maximize the usage of precious cryopreserved sperm samples in assisted reproduction technology.
基金Project(50504019) supported by the National Natural Science Foundation of ChinaProject(2008BB4040) supported by the Science Foundation of Chongqing, ChinaProject(2008AA4028) supported by Scientific and Technological Project of Chongqing Science and Technology Commission, China
文摘Repeatedly unidirectional bending(RUB) was applied to the magnesium alloy sheet to improve the basal texture.The effect of RUB temperature on resulting structure and room temperature properties was investigated.The texture components of the sheet undergoing RUB at recovery temperature were similar to those of the sheet undergoing RUB at room temperature(RT).As the RUB temperature increased to above recrystallization temperature,the texture components became more disperse and the pyramidal components increased.With the increase of RUB temperature,the grain size near the surface of the sheets undergoing RUB tended to grow up.When the sheets were processed by RUB at medium-high temperature followed by annealing at 533 K,the yield strength and fracture elongation were lower than those of the cold rolled sheet;however,the Erichsen value was slightly higher than that of the cold rolled sheet.The sheet undergoing RUB at RT followed by annealing at 533 K represented the best mechanical properties.
基金This study was financially supported by the National Natural Science Foundation of China(51579062,51379147),which is gratefully appreciated.
文摘The mechanical behaviors and energy dissipation characteristics of heat-treated granite were investigated under repeated impact loading.The granite samples were firstly heat-treated at the temperature of 20℃,200℃,400℃,and 600℃,respectively.The thermal damage characteristics of these samples were then observed and measured before impact tests.Dynamic impact compression tests finally were carried out using a modified split-Hopkinson pressure bar under three impact velocities of 12 m/s,15 m/s,and 18 m/s.These test results show that the mineral composition and the main oxides of the granite do not change with these treatment temperatures.The number of microcracks and microvoids decreases in the sample after 200℃ treatment.The mechanical properties of a sample after 600℃ treatment were rapidly deteriorated under the same impact velocity.The average of peak stress is much smaller than those after 20℃,200℃ and 400℃ treatments.The heat-treated samples have an energy threshold each.When the dissipated energy of a sample under a single impact is less than this threshold,the repeated impacts hardly lead to further damage accumulation even if its total breakage energy dissipation(BED)density is large.Under the same number of repeated impacts,the cumulative BED density of a sample after 600℃ treatment is the largest and its damage evolves most quickly.The total BED density of the sample after 200℃ treatment is the highest,which implies that this sample has better resistance to repeated impact,thus having less crack initiation and growth.
文摘In China, most oil fields are continental sedimentation with strong heterogeneity, which on one side makes the reservoir prospecting and development more difficult, but on the other side provides more space for searching residual oil in matured fields. Time-lapse seismic reservoir monitoring technique is one of most important techniques to define residual oil distribution. According to the demand for and development of time-lapse seismic reservoir monitoring in China, purposeless repeated acquisition time-lapse seismic data processing was studied. The four key steps in purposeless repeated acquisition time-lapse seismic data processing, including amplitude-preserved processing with relative consistency, rebinning, match filtering and difference calculation, were analyzed by combining theory and real seismic data processing. Meanwhile, quality control during real time-lapse seismic processing was emphasized.
基金funded by the Higher Education Commission(HEC),Government of the Islamic Republic of Pakistan and Edith Cowan University,Perth,Australia。
文摘In the recent past,the potential benefits of wraparound geosynthetic reinforcement technique for constructing the reinforced soil foundations have been reported.This paper presents the experimental study on the behaviour of model strip footing resting on sandy soil bed reinforced with geosynthetic in wraparound and planar forms under monotonic and repeated loadings.The geosynthetic layers were laid according to the reinforcement ratio to minimise the scale effect.It is found that for the same amount of reinforcement material,the wraparound reinforced model resulted in less settlement in comparison to planar reinforced models.The efficiency of wraparound reinforced model increased with the increase in load amplitude and the rate of total cumulative settlement substantially decreased with the increase in number of load cycles.The wraparound reinforced model has shown about 45% lower average total settlement in comparison to unreinforced model,while the double-layer reinforced model has about 41% lower average total settlement at the cost of approximately twice the material and 1.5 times the occupied land width ratio.Moreover,wraparound models have shown much greater stability in comparison to their counterpart models when subjected to incremental repeated loading.
基金supported by the National Natural Science Foundation of China(Grant Nos.52174362 and 51975207)the Natural Science Foundation of Hunan Province(Grant no.2023JJ10020&2021JJ30257)+1 种基金the Xiangtan Special Project for Building a National Innovative City(Grant No.CG-YB20221043)the Yancheng“Talent Plan of Yellow Sea Pearl”for Leading Talent Project.
文摘A new repeated upsetting-extrusion (RUE) process was proposed to improve the microstructure and the mechanical properties of Mg alloys. The effects of deformation temperature on the microstructure and microhardness of RUEed AQ80 Mg alloy were studied. The results showed that Mg alloy is subjected to sufficient corner shear deformation, upsetting deformation, and extrusion deformation, resulting in a large and uniformly distributed effective strain after RUE deformation. The microstructure is refined to an average grain size of 2.1 μm by the continuous dynamic recrystallization (CDRX) mechanism at 250 °C. As the temperature increases to 300 °C, the discontinuous dynamic recrystallization (DDRX) mechanism is activated and the average grain size is refined to 1.6 µm by the combined effect of CDRX and DDRX. In comparison to their parent grains, the orientations of the CDRXed grains show a clearly preferred orientation, but those of the DDRXed grains are completely different. At 350 °C, {10-12} extension twins appear in the microstructure, and the twinning-induced recrystallization (TDRX) mechanism plays an important role in grain refinement. With the two strengthening mechanisms of fine-grained strengthening and dislocation strengthening, the microhardness of the 250 °C sample is greatly improved, with an increase of about 35.1% compared to the initial sample.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.51878666 and 51678572).
文摘Practical assessment of subgrade settlement induced by train operation requires developing suitable models capable of describing permanent deformation characteristics of subgrade filling under repeated dynamic loading.In this paper,repeated load triaxial tests were performed on coarse-grained soil(CGS),and the axial permanent strain of CGS under different confining pressures and dynamic stress amplitudes was analysed.Permanent deformation behaviors of CGS were categorized based on the variation trend of permanent strain rate with accumulated permanent strain and the shakedown theory.A prediction model of permanent deformation considering stress state and number of load cycles was established,and the ranges of parameters for different types of dynamic behaviors were also divided.The results indicated that the variational trend of permanent strain rate with accumulated permanent strain can be used as a basis for classifying dynamic behaviors of CGS.The stress state(confining pressure and dynamic stress amplitude)has significant effects on the permanent strain rate.The accumulative characteristics of permanent deformation of CGS with the number of load cycles can be described by a power function,and the model parameters can reflect the influence of confining pressure and dynamic stress amplitude.The study’s results could help deepen understanding of the permanent deformation characteristics of CGS.
基金Supported by Zhejiang Provincial Medical and Health Platform Project,No.2018275889
文摘BACKGROUND Polyacrylamide hydrogel(PAAG)injections were once common in breast augmentation and have been prohibited for augmentation mammaplasty in China since a large number of patients who underwent breast augmentation with PAAG injections have continued to seek medical advice as a result of related complications.Among all these complications,distant migration is relatively rare.CASE SUMMARY A 49-year-old female presented at the hospital with a one-year history of a vulvar lump.The sonography of the lump showed several subcutaneous fluid-filled regions from the left vulva to the pubic symphysis,which suggested possible fat liquefaction.An enhanced magnetic resonance imaging(MRI)revealed a cystic area,which was considered a benign lesion.Intraoperative observations showed that the mass did not have an obvious capsule,the subcutaneous tissue presented as a cavity,and some yellow material came out of this cavity.A culture of the drainage did not show bacterial contamination.Histopathology revealed a foreign body granuloma.After resection and closed drainage,lumps were successively observed in the left lower abdomen and the bilateral hypochondriac region with infections.Sonography found that the hypoechoic areas in the bilateral hypochondriac region seemed continuous with deep in the breasts.The patient reported that she had undergone surgery with PAAG injections 20 years ago after she was repeatedly asked about her past history.Finally,a diagnosis of distant migration of PAAG was made.CONCLUSION PAAG gel can migrate after long periods of time.A diagnosis should not be limited to the area where the symptom develops.
基金supported by grants from the National Natural Science Foundation of China(No.81100401 and No.81470063)Guangdong Natural Science Foundation of China(No.2014A030313129)the Doctoral Fund of the Ministry of Education of China(No.20110171120096)
文摘Long-term gonadotropin-releasing hormone agonist（Gn RHa） administration before in vitro fertilization（IVF）/intracytoplasmic sperm injection（ICSI） in infertile women with endometriosis or adenomyosis significantly enhanced the chances of pregnancy in both fresh and frozen embryo transfer cycles. We hypothesized that long-term Gn RHa treatment might also be beneficial for the idiopathic repeated implantation failure（RIF） patients. In the 21 patients receiving Gn RHa and hormone replacement therapy（G-HRT） protocols for frozen embryo transfer, their data were compared with those of the 56 of frozen/fresh cycles they had previously undergone（previous protocols）. Comparison showed that the finial results were significantly better with G-HRT protocols than with their previous protocols, with pregnancy rate, clinical pregnancy rate, implantation rate and on-going pregnancy rate being 70%, 60%, 40% and 38% respectively with G-HRT protocols, against 17%, 11%, 6.3% and 5% with previous protocols. The results showed that hormonally controlled endometrial preparation with prior Gn RHa suppression could be used for patients who had experienced repeated failures of IVF treatment despite having morphologically optimal embryos, and the treatment may help increase the receptivity of the endometrium in these patients.
