A robust digital receiver based on a matched filter （MF） is proposed for the radio frequency identification （RFID） reader system to enhance the reliability of signal processing in the electronic product code （EPC...A robust digital receiver based on a matched filter （MF） is proposed for the radio frequency identification （RFID） reader system to enhance the reliability of signal processing in the electronic product code （EPC） sensor network （ESN）. The performance of the proposed receiver is investigated by examining the anti-collision algorithm in the EPC global Class1 Generation2 protocol. The validity and usefulness are demonstrated by both computer simulations and experiments. Based on the verification results, comparing with the conventional zero crossing detector （ZCD） based receiver, the proposed receiver is very robust against strong amplitude distortions and considerable frequency deviations happening on the backscattered signal from a passive tag.展开更多
We investigate the problem of how to minimize the energy consumption in multi-hop Wireless Sensor Network (WSN),under the constraint of end-to-end reliability Quality of Seervice (QoS) requirement.Based on the investi...We investigate the problem of how to minimize the energy consumption in multi-hop Wireless Sensor Network (WSN),under the constraint of end-to-end reliability Quality of Seervice (QoS) requirement.Based on the investigation,we jointly consider the routing,relay selection and power allocation algorithm,and present a novel distributed cross-layer strategy using opportunistic relaying scheme for cooperative communication.The results show that under the same QoS requirement,the proposed cross-layer strategy performs better than other cross-layer cooperative communication algorithms in energy efficiency.We also investigated the impact of several parameters on the energy efficiency of the cooperative communication in WSNs,thus can be used to provide guidelines to decide when and how to apply cooperation for a given setup.展开更多
In the RSSI-based positioning algorithm,regarding the problem of a great conflict between precision and cost,a low-power and low-cost synergic localization algorithm is proposed,where effective methods are adopted in ...In the RSSI-based positioning algorithm,regarding the problem of a great conflict between precision and cost,a low-power and low-cost synergic localization algorithm is proposed,where effective methods are adopted in each phase of the localization process and fully use the detective information in the network to improve the positioning precision and robustness.In the ranging period,the power attenuation factor is obtained through the wireless channel modeling,and the RSSI value is transformed into distance.In the positioning period,the preferred reference nodes are used to calculate coordinates.In the position optimization period,Taylor expansion and least-squared iterative update algorithms are used to further improve the location precision.In the positioning,the notion of cooperative localization is introduced,in which the located node satisfying certain demands will be upgraded to a reference node so that it can participate in the positioning of other nodes,and improve the coverage and positioning precision.The results show that on the same network conditions,the proposed algorithm in this paper is similar to the Taylor series expansion algorithm based on the actual coordinates,but much higher than the basic least square algorithm,and the positioning precision is improved rapidly with the reduce of the range error.展开更多
A novel practical cooperative diversity method for power-limited wireless sensor network system was proposed. At first, the system model was presented and the cooperation problem is formulated under the minimum outage...A novel practical cooperative diversity method for power-limited wireless sensor network system was proposed. At first, the system model was presented and the cooperation problem is formulated under the minimum outage probability criterion, then the focus was put on the power efficiency of system, such as the relay selection, cooperation strategy and power allocation etc. At last the uniform procedure of the proposed method was given. The results of the simulation clearly demonstrate that our method not only has the properties of simple operation and wide applying scope, but also outperforms those of current classical methods on the aspect of outage probability under the basis of the same power limitation.展开更多
Energy-efficient communications is crucial for wireless sensor networks(WSN) where energy consumption is constrained. The transmission and reception energy can be saved by applying network coding to many wireless comm...Energy-efficient communications is crucial for wireless sensor networks(WSN) where energy consumption is constrained. The transmission and reception energy can be saved by applying network coding to many wireless communications systems. In this paper,we present a coded cooperation scheme which employs network coding to WSN. In the scheme,the partner node forwards the combination of the source data and its own data instead of sending the source data alone. Afterward,both of the system block error rates(BLERs) and energy performance are evaluated. Experiment results show that the proposed scheme has higher energy efficiency. When Noise power spectral density is-171dBm/Hz,the energy consumption of the coded cooperation scheme is 81.1% lower than that of the single-path scheme,43.9% lower than that of the cooperation scheme to reach the target average BLER of 10-2. When the channel condition is getting worse,the energy saving effect is more obvious.展开更多
Wireless sensor networks （WSNs） are based on monitoring or managing the sensing area by using the location information with sensor nodes. Most sensor nodes require hardware support or receive packets with location i...Wireless sensor networks （WSNs） are based on monitoring or managing the sensing area by using the location information with sensor nodes. Most sensor nodes require hardware support or receive packets with location information to estimate their locations, which needs lots of time or costs. In this paper we proposed a localization mechanism using a mobile reference node （MRN） and trilateration in WSNs to reduce the energy consumption and location error. The simulation results demonstrate that the proposed mechanism can obtain more unknown nodes locations by the mobile reference node moving scheme and will decreases the energy consumption and average ocation error.展开更多
In this paper we introduce a novel energy-aware routing protocol REPU (reliable, efficient with path update), which provides reliability and energy efficiency in data delivery. REPU utilizes the residual energy availa...In this paper we introduce a novel energy-aware routing protocol REPU (reliable, efficient with path update), which provides reliability and energy efficiency in data delivery. REPU utilizes the residual energy available in the nodes and the re-ceived signal strength of the nodes to identify the best possible route to the destination. Reliability is achieved by selecting a number of intermediate nodes as waypoints and the route is divided into smaller segments by the waypoints. One distinct ad-vantage of this model is that when a node on the route moves out or fails, instead of discarding the whole original route, only the two waypoint nodes of the broken segment are used to find a new path. REPU outperforms traditional schemes by establishing an energy-efficient path and also takes care of efficient route maintenance. Simulation results show that this routing scheme achieves much higher performance than the classical routing protocols, even in the presence of high node density, and overcomes simul-taneous packet forwarding.展开更多
The design of an effective and robust data gathering algorithm is crucial to the overall performance of wireless sensor networks (WSN). However, using traditional routing algorithms for data gathering is energy-ineffi...The design of an effective and robust data gathering algorithm is crucial to the overall performance of wireless sensor networks (WSN). However, using traditional routing algorithms for data gathering is energy-inefficient for sensor nodes with limited power resources and multi-hop communication protocols. Data gathering with mobile sinks provided an effective solution to this problem. The major drawback of this approach is the time and path constraints of the mobile sink, which limit the mobile sink to collect data from all sensor nodes and, then, data routing is still required for these unreachable parts by the mobile sink. This paper presents a new data gathering algorithm called Connectivity-Based Data Collection (CBDC). The CBDC algorithm utilizes the connectivity between sensor nodes so as to determine the trajectory of the mobile sink whilst satisfying its path constraint and minimizing the number of multi-hop communications. The presented results show that CBDC, in comparison with the LEACH-C algorithm, prolongs the network life time at different connectivity levels of sensor networks, varying number of sensor nodes and at different path constraints of the mobile sink.展开更多
Wireless Sensor Networks (WSNs) are used to sense certain parameters in an environment, manipulate the acquired data and transmit/receive the information in an intra or inter communication network. Innovative research...Wireless Sensor Networks (WSNs) are used to sense certain parameters in an environment, manipulate the acquired data and transmit/receive the information in an intra or inter communication network. Innovative researches in WSNs have resulted in the increase of application scenarios, which, at a time instant, were not even well-thought-of to be automated by WSNs. With this advent, it becomes necessary to customize sensor nodes depending on node specific characteristics and the deployment environment. Challenges for designing a WSN depend on the scenario in which it is implemented. Commercially available wireless motes are mostly generalized for usage in most of the applications. This survey work aims to provide an insight on the various wireless motes available in the market. This will enhance future researchers to select wireless modules which might be most suitable for their application needs. Various parameters related to the technical and implementation characteristics of WSNs were considered in this survey. This survey also concentrates with the survey on individual RF modules based on certain parameters like frequency of operation, transmission power, receiver sensitivity, interface mechanism, data rate, active, sleep & power-down current consumptions, range and cost involved.展开更多
Energy efficiency and enhanced backbone capacity is obtained by exploiting the geometric orientation of cooperative nodes in wireless sensor network. The cooperative communication in wireless sensor networks (WSN) giv...Energy efficiency and enhanced backbone capacity is obtained by exploiting the geometric orientation of cooperative nodes in wireless sensor network. The cooperative communication in wireless sensor networks (WSN) gives us leverage to get the inherent advantages of its random node’s locations and the direction of the data flow. Depending on the channel conditions and the transmission distance, the number of cooperative nodes is selected, that participate in an energy efficient transmission/reception. Simulation results show that increasing the cooperative receive diversity, decreases the energy consumption per bit in cooperative communications. It has also been shown that the network backbone capacity can be increased by controlled displacement of antennas at base station at the expense of energy per bit.展开更多
Sensor networks are used in various applications. Sensors acquire samples of physical data and send them to a destination node in different topologies. Multiple Input Multiple Output (MIMO) systems showed good utiliza...Sensor networks are used in various applications. Sensors acquire samples of physical data and send them to a destination node in different topologies. Multiple Input Multiple Output (MIMO) systems showed good utilization of channel characteristics. In MIMO Sensor Network, multiple signals are transmitted from the sensors and multiple sensors are used as receiving nodes. This provides each sensor multiple copies of the transmitted signal and hence, array processing techniques helps in reducing the effects of noise. In this paper we devise the use of MIMO sensor network and array decision techniques to reduce the noise effect. The proposed system uses a transmission time diversity to form the MIMO system. If the number of sensors is large then groups of sensors will form the MIMO system and benefited from the diversity to reduce the required transmitted power from each sensor. Enhancing the BER reduce the required transmitted power which results in longer battery life for sensor nodes. Simulation results showed an overall gain in SNR that reaches 11dB in some sensor network scenarios. This gain in SNR led to the opportunity of reducing the transmitted power by similar amount and hence, longer battery life is obtained.展开更多
Bridge Scour is one of the major causes of bridge failures all around the world and there have been significant efforts for its detection and measurement using different acoustic approaches. In this paper, we propose ...Bridge Scour is one of the major causes of bridge failures all around the world and there have been significant efforts for its detection and measurement using different acoustic approaches. In this paper, we propose and investigate an effective method to utilize Received Signal Strength (RSS) for measuring scour depth where acoustic sensors are deployed. We also extend a statistical testing to determine the difference in signal levels at the sensor nodes prior to and after scour formation and subsequently determine the actual depth of scour. Additionally, we make an attempt to evaluate underwater distance and depth using signal strength perceived at the receiver which makes it free from the requirement of accurate receiver-sender synchronization in contrast to Time of Flight (ToF) or Time of Arrival (ToA) techniques. The scour depths are eventually compared for the conditions when the bottom is composed of a single or multiple layers. The simulation results clearly show that different depths are calculated for the case of multilayered bottom (0.8 to 3.9 meters for instance) as compared to a constant depth of 2 meters for the case of a single layered bottom.展开更多
Radio coverage directly affects the network connectivity, which is the foundational issue to ensure the normal operation of the network. Many efforts have been made to estimate the radio coverage of sensor nodes. The ...Radio coverage directly affects the network connectivity, which is the foundational issue to ensure the normal operation of the network. Many efforts have been made to estimate the radio coverage of sensor nodes. The existing approaches (often RSSI measurement-based), however, suffer from heavy measurement cost and are not well suitable for the large-scale densely deployed WSNs. NRC-Map, a novel algorithm is put forward for sensor nodes radio coverage mapping. The algorithm is based on the RSSI values collected by the neighbor nodes. According to the spatial relationship, neighbor nodes are mapping to several overlapped sectors. By use of the least squares fitting method, a log-distance path loss model is established for each sector. Then, the max radius of each sector is computed according to the path loss model and the given signal attenuation threshold. Finally, all the sectors are overlapped to estimate the node radio coverage. Experimental results show that the method is simple and effectively improve the prediction accuracy of the sensor node radio coverage.展开更多
An effective algorithm based on signal coverage of effective communication and local energy-consumption saving strategy is proposed for the application in wireless sensor networks.This algorithm consists of two sub-al...An effective algorithm based on signal coverage of effective communication and local energy-consumption saving strategy is proposed for the application in wireless sensor networks.This algorithm consists of two sub-algorithms.One is the multi-hop partition subspaces clustering algorithm for ensuring local energybalanced consumption ascribed to the deployment from another algorithm of distributed locating deployment based on efficient communication coverage probability（DLD-ECCP）.DLD-ECCP makes use of the characteristics of Markov chain and probabilistic optimization to obtain the optimum topology and number of sensor nodes.Through simulation,the relative data demonstrate the advantages of the proposed approaches on saving hardware resources and energy consumption of networks.展开更多
To overcome the disadvantages of the location algorithm based on received signal strength indication(RSSI)in the existing wireless sensor networks(WSNs),a novel adaptive cooperative location algorithm is proposed.To t...To overcome the disadvantages of the location algorithm based on received signal strength indication(RSSI)in the existing wireless sensor networks(WSNs),a novel adaptive cooperative location algorithm is proposed.To tolerate some minor errors in the information of node position,a reference anchor node is employed.On the other hand,Dixon method is used to remove the outliers of RSSI,the standard deviation threshold of RSSI and the learning model are put forward to reduce the ranging error of RSSI and improve the positioning precision effectively.Simulations are run to evaluate the performance of the algorithm.The results show that the proposed algorithm offers more precise location and better stability and robustness.展开更多
With the rapid evolution of WSNs technology, it is very important to evaluate link quality quickly and accurately, so that the routing protocols can take relevant strategies in time to keep the entire network working ...With the rapid evolution of WSNs technology, it is very important to evaluate link quality quickly and accurately, so that the routing protocols can take relevant strategies in time to keep the entire network working steadily and efficiently. However, the issue of layer is still open to research. To tackle this issue, a improving link quality assessment methods on physical novel link quality assessment metric called S3LQA is proposed, which estimates the link quality of wireless sensor networks by CC2420 wireless radio frequency transceiver principles and free space propagation theory. The metric adopts both complete and incomplete packages to improve the evaluation performance effectively based on IEEE802. 15.4 frame format and DSSS-O- QPSK mechanism. The experimental results show that the proposed method can improve energy cost and achieves hatter real-timin nerformance than traditional counting-based （PRR） link aualitv assessment metric.展开更多
The paper proposes a wireless sensor network(WSN)localization algorithm based on adaptive whale neural network and extended Kalman filtering to address the problem of excessive reliance on environmental parameters A a...The paper proposes a wireless sensor network(WSN)localization algorithm based on adaptive whale neural network and extended Kalman filtering to address the problem of excessive reliance on environmental parameters A and signal constant n in traditional signal propagation path loss models.This algorithm utilizes the adaptive whale optimization algorithm to iteratively optimize the parameters of the backpropagation(BP)neural network,thereby enhancing its prediction performance.To address the issue of low accuracy and large errors in traditional received signal strength indication(RSSI),the algorithm first uses the extended Kalman filtering model to smooth the RSSI signal values to suppress the influence of noise and outliers on the estimation results.The processed RSSI values are used as inputs to the neural network,with distance values as outputs,resulting in more accurate ranging results.Finally,the position of the node to be measured is determined by combining the weighted centroid algorithm.Experimental simulation results show that compared to the standard centroid algorithm,weighted centroid algorithm,BP weighted centroid algorithm,and whale optimization algorithm(WOA)-BP weighted centroid algorithm,the proposed algorithm reduces the average localization error by 58.23%,42.71%,31.89%,and 17.57%,respectively,validating the effectiveness and superiority of the algorithm.展开更多
Wireless Sensor Network(WSNs)consists of a group of nodes that analyze the information from surrounding regions.The sensor nodes are responsible for accumulating and exchanging information.Generally,node local-ization...Wireless Sensor Network(WSNs)consists of a group of nodes that analyze the information from surrounding regions.The sensor nodes are responsible for accumulating and exchanging information.Generally,node local-ization is the process of identifying the target node’s location.In this research work,a Received Signal Strength Indicator(RSSI)-based optimal node localization approach is proposed to solve the complexities in the conventional node localization models.Initially,the RSSI value is identified using the Deep Neural Network(DNN).The RSSI is conceded as the range-based method and it does not require special hardware for the node localization process,also it consumes a very minimal amount of cost for localizing the nodes in 3D WSN.The position of the anchor nodes is fixed for detecting the location of the target.Further,the optimal position of the target node is identified using Hybrid T cell Immune with Lotus Effect Optimization algorithm(HTCI-LEO).During the node localization process,the average localization error is minimized,which is the objective of the optimal node localization.In the regular and irregular surfaces,this hybrid algorithm effectively performs the localization process.The suggested hybrid algorithm converges very fast in the three-dimensional(3D)environment.The accuracy of the proposed node localization process is 94.25%.展开更多
Antenna and base-station diversity have been applied to a wireless sensor network for the monitoring of live-stock. A field trial has been described and the advantage to be gained in a practical environment has been a...Antenna and base-station diversity have been applied to a wireless sensor network for the monitoring of live-stock. A field trial has been described and the advantage to be gained in a practical environment has been assessed.展开更多
基金supported by the Korea Evaluation Institute of Industrial Technology(KEIT),under the R&D Support Program of Ministry of Knowledge Economy,Korea
文摘A robust digital receiver based on a matched filter （MF） is proposed for the radio frequency identification （RFID） reader system to enhance the reliability of signal processing in the electronic product code （EPC） sensor network （ESN）. The performance of the proposed receiver is investigated by examining the anti-collision algorithm in the EPC global Class1 Generation2 protocol. The validity and usefulness are demonstrated by both computer simulations and experiments. Based on the verification results, comparing with the conventional zero crossing detector （ZCD） based receiver, the proposed receiver is very robust against strong amplitude distortions and considerable frequency deviations happening on the backscattered signal from a passive tag.
基金Supported by the 100 Top-Talents Program of Chinese Academic of Sciences (No. 99M2008M02)
文摘We investigate the problem of how to minimize the energy consumption in multi-hop Wireless Sensor Network (WSN),under the constraint of end-to-end reliability Quality of Seervice (QoS) requirement.Based on the investigation,we jointly consider the routing,relay selection and power allocation algorithm,and present a novel distributed cross-layer strategy using opportunistic relaying scheme for cooperative communication.The results show that under the same QoS requirement,the proposed cross-layer strategy performs better than other cross-layer cooperative communication algorithms in energy efficiency.We also investigated the impact of several parameters on the energy efficiency of the cooperative communication in WSNs,thus can be used to provide guidelines to decide when and how to apply cooperation for a given setup.
基金National Natural Science Foundation of China,grant number 62205120,funded this research.
文摘In the RSSI-based positioning algorithm,regarding the problem of a great conflict between precision and cost,a low-power and low-cost synergic localization algorithm is proposed,where effective methods are adopted in each phase of the localization process and fully use the detective information in the network to improve the positioning precision and robustness.In the ranging period,the power attenuation factor is obtained through the wireless channel modeling,and the RSSI value is transformed into distance.In the positioning period,the preferred reference nodes are used to calculate coordinates.In the position optimization period,Taylor expansion and least-squared iterative update algorithms are used to further improve the location precision.In the positioning,the notion of cooperative localization is introduced,in which the located node satisfying certain demands will be upgraded to a reference node so that it can participate in the positioning of other nodes,and improve the coverage and positioning precision.The results show that on the same network conditions,the proposed algorithm in this paper is similar to the Taylor series expansion algorithm based on the actual coordinates,but much higher than the basic least square algorithm,and the positioning precision is improved rapidly with the reduce of the range error.
基金The National Natural Science Foundation of China (No60372107)
文摘A novel practical cooperative diversity method for power-limited wireless sensor network system was proposed. At first, the system model was presented and the cooperation problem is formulated under the minimum outage probability criterion, then the focus was put on the power efficiency of system, such as the relay selection, cooperation strategy and power allocation etc. At last the uniform procedure of the proposed method was given. The results of the simulation clearly demonstrate that our method not only has the properties of simple operation and wide applying scope, but also outperforms those of current classical methods on the aspect of outage probability under the basis of the same power limitation.
基金support in part from the National Natural Science Foundation of China (No. 60962002)the Program to Sponsor Teams for Innovation in the Construction of Talent Highlands in Guangxi Institutions of Higher Learning+1 种基金the Foundation of Guangxi Key Laboratory of Information and Communication (NO. 20904)the Scientific Research Foundation of Guangxi University (Grant No.XBZ091006)
文摘Energy-efficient communications is crucial for wireless sensor networks(WSN) where energy consumption is constrained. The transmission and reception energy can be saved by applying network coding to many wireless communications systems. In this paper,we present a coded cooperation scheme which employs network coding to WSN. In the scheme,the partner node forwards the combination of the source data and its own data instead of sending the source data alone. Afterward,both of the system block error rates(BLERs) and energy performance are evaluated. Experiment results show that the proposed scheme has higher energy efficiency. When Noise power spectral density is-171dBm/Hz,the energy consumption of the coded cooperation scheme is 81.1% lower than that of the single-path scheme,43.9% lower than that of the cooperation scheme to reach the target average BLER of 10-2. When the channel condition is getting worse,the energy saving effect is more obvious.
文摘Wireless sensor networks （WSNs） are based on monitoring or managing the sensing area by using the location information with sensor nodes. Most sensor nodes require hardware support or receive packets with location information to estimate their locations, which needs lots of time or costs. In this paper we proposed a localization mechanism using a mobile reference node （MRN） and trilateration in WSNs to reduce the energy consumption and location error. The simulation results demonstrate that the proposed mechanism can obtain more unknown nodes locations by the mobile reference node moving scheme and will decreases the energy consumption and average ocation error.
文摘In this paper we introduce a novel energy-aware routing protocol REPU (reliable, efficient with path update), which provides reliability and energy efficiency in data delivery. REPU utilizes the residual energy available in the nodes and the re-ceived signal strength of the nodes to identify the best possible route to the destination. Reliability is achieved by selecting a number of intermediate nodes as waypoints and the route is divided into smaller segments by the waypoints. One distinct ad-vantage of this model is that when a node on the route moves out or fails, instead of discarding the whole original route, only the two waypoint nodes of the broken segment are used to find a new path. REPU outperforms traditional schemes by establishing an energy-efficient path and also takes care of efficient route maintenance. Simulation results show that this routing scheme achieves much higher performance than the classical routing protocols, even in the presence of high node density, and overcomes simul-taneous packet forwarding.
文摘The design of an effective and robust data gathering algorithm is crucial to the overall performance of wireless sensor networks (WSN). However, using traditional routing algorithms for data gathering is energy-inefficient for sensor nodes with limited power resources and multi-hop communication protocols. Data gathering with mobile sinks provided an effective solution to this problem. The major drawback of this approach is the time and path constraints of the mobile sink, which limit the mobile sink to collect data from all sensor nodes and, then, data routing is still required for these unreachable parts by the mobile sink. This paper presents a new data gathering algorithm called Connectivity-Based Data Collection (CBDC). The CBDC algorithm utilizes the connectivity between sensor nodes so as to determine the trajectory of the mobile sink whilst satisfying its path constraint and minimizing the number of multi-hop communications. The presented results show that CBDC, in comparison with the LEACH-C algorithm, prolongs the network life time at different connectivity levels of sensor networks, varying number of sensor nodes and at different path constraints of the mobile sink.
文摘Wireless Sensor Networks (WSNs) are used to sense certain parameters in an environment, manipulate the acquired data and transmit/receive the information in an intra or inter communication network. Innovative researches in WSNs have resulted in the increase of application scenarios, which, at a time instant, were not even well-thought-of to be automated by WSNs. With this advent, it becomes necessary to customize sensor nodes depending on node specific characteristics and the deployment environment. Challenges for designing a WSN depend on the scenario in which it is implemented. Commercially available wireless motes are mostly generalized for usage in most of the applications. This survey work aims to provide an insight on the various wireless motes available in the market. This will enhance future researchers to select wireless modules which might be most suitable for their application needs. Various parameters related to the technical and implementation characteristics of WSNs were considered in this survey. This survey also concentrates with the survey on individual RF modules based on certain parameters like frequency of operation, transmission power, receiver sensitivity, interface mechanism, data rate, active, sleep & power-down current consumptions, range and cost involved.
文摘Energy efficiency and enhanced backbone capacity is obtained by exploiting the geometric orientation of cooperative nodes in wireless sensor network. The cooperative communication in wireless sensor networks (WSN) gives us leverage to get the inherent advantages of its random node’s locations and the direction of the data flow. Depending on the channel conditions and the transmission distance, the number of cooperative nodes is selected, that participate in an energy efficient transmission/reception. Simulation results show that increasing the cooperative receive diversity, decreases the energy consumption per bit in cooperative communications. It has also been shown that the network backbone capacity can be increased by controlled displacement of antennas at base station at the expense of energy per bit.
文摘Sensor networks are used in various applications. Sensors acquire samples of physical data and send them to a destination node in different topologies. Multiple Input Multiple Output (MIMO) systems showed good utilization of channel characteristics. In MIMO Sensor Network, multiple signals are transmitted from the sensors and multiple sensors are used as receiving nodes. This provides each sensor multiple copies of the transmitted signal and hence, array processing techniques helps in reducing the effects of noise. In this paper we devise the use of MIMO sensor network and array decision techniques to reduce the noise effect. The proposed system uses a transmission time diversity to form the MIMO system. If the number of sensors is large then groups of sensors will form the MIMO system and benefited from the diversity to reduce the required transmitted power from each sensor. Enhancing the BER reduce the required transmitted power which results in longer battery life for sensor nodes. Simulation results showed an overall gain in SNR that reaches 11dB in some sensor network scenarios. This gain in SNR led to the opportunity of reducing the transmitted power by similar amount and hence, longer battery life is obtained.
文摘Bridge Scour is one of the major causes of bridge failures all around the world and there have been significant efforts for its detection and measurement using different acoustic approaches. In this paper, we propose and investigate an effective method to utilize Received Signal Strength (RSS) for measuring scour depth where acoustic sensors are deployed. We also extend a statistical testing to determine the difference in signal levels at the sensor nodes prior to and after scour formation and subsequently determine the actual depth of scour. Additionally, we make an attempt to evaluate underwater distance and depth using signal strength perceived at the receiver which makes it free from the requirement of accurate receiver-sender synchronization in contrast to Time of Flight (ToF) or Time of Arrival (ToA) techniques. The scour depths are eventually compared for the conditions when the bottom is composed of a single or multiple layers. The simulation results clearly show that different depths are calculated for the case of multilayered bottom (0.8 to 3.9 meters for instance) as compared to a constant depth of 2 meters for the case of a single layered bottom.
文摘Radio coverage directly affects the network connectivity, which is the foundational issue to ensure the normal operation of the network. Many efforts have been made to estimate the radio coverage of sensor nodes. The existing approaches (often RSSI measurement-based), however, suffer from heavy measurement cost and are not well suitable for the large-scale densely deployed WSNs. NRC-Map, a novel algorithm is put forward for sensor nodes radio coverage mapping. The algorithm is based on the RSSI values collected by the neighbor nodes. According to the spatial relationship, neighbor nodes are mapping to several overlapped sectors. By use of the least squares fitting method, a log-distance path loss model is established for each sector. Then, the max radius of each sector is computed according to the path loss model and the given signal attenuation threshold. Finally, all the sectors are overlapped to estimate the node radio coverage. Experimental results show that the method is simple and effectively improve the prediction accuracy of the sensor node radio coverage.
基金supported by the Major State Basic Research Program of China(B1420080204)National Science Fund for Distinguished Young Scholars(60725415)the National Natural Science Foundation of China(60606006)
文摘An effective algorithm based on signal coverage of effective communication and local energy-consumption saving strategy is proposed for the application in wireless sensor networks.This algorithm consists of two sub-algorithms.One is the multi-hop partition subspaces clustering algorithm for ensuring local energybalanced consumption ascribed to the deployment from another algorithm of distributed locating deployment based on efficient communication coverage probability（DLD-ECCP）.DLD-ECCP makes use of the characteristics of Markov chain and probabilistic optimization to obtain the optimum topology and number of sensor nodes.Through simulation,the relative data demonstrate the advantages of the proposed approaches on saving hardware resources and energy consumption of networks.
基金supported by National Natural Science Foundation of China (No.60872038)Natural Science Foundation of Chongqing(CSTC2009BA2064)
文摘To overcome the disadvantages of the location algorithm based on received signal strength indication(RSSI)in the existing wireless sensor networks(WSNs),a novel adaptive cooperative location algorithm is proposed.To tolerate some minor errors in the information of node position,a reference anchor node is employed.On the other hand,Dixon method is used to remove the outliers of RSSI,the standard deviation threshold of RSSI and the learning model are put forward to reduce the ranging error of RSSI and improve the positioning precision effectively.Simulations are run to evaluate the performance of the algorithm.The results show that the proposed algorithm offers more precise location and better stability and robustness.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61262020)Aeronautical Science Foundation of China(Grant No.2010ZC56008 and 2012ZC56006)Key Technology R&D Program of Jiangxi Province(Grant No.2009BGA01000 and 20111BBE50030)
文摘With the rapid evolution of WSNs technology, it is very important to evaluate link quality quickly and accurately, so that the routing protocols can take relevant strategies in time to keep the entire network working steadily and efficiently. However, the issue of layer is still open to research. To tackle this issue, a improving link quality assessment methods on physical novel link quality assessment metric called S3LQA is proposed, which estimates the link quality of wireless sensor networks by CC2420 wireless radio frequency transceiver principles and free space propagation theory. The metric adopts both complete and incomplete packages to improve the evaluation performance effectively based on IEEE802. 15.4 frame format and DSSS-O- QPSK mechanism. The experimental results show that the proposed method can improve energy cost and achieves hatter real-timin nerformance than traditional counting-based （PRR） link aualitv assessment metric.
基金supported by the National Natural Science Foundation of China(Nos.62265010,62061024)Gansu Province Science and Technology Plan(No.23YFGA0062)Gansu Province Innovation Fund(No.2022A-215)。
文摘The paper proposes a wireless sensor network(WSN)localization algorithm based on adaptive whale neural network and extended Kalman filtering to address the problem of excessive reliance on environmental parameters A and signal constant n in traditional signal propagation path loss models.This algorithm utilizes the adaptive whale optimization algorithm to iteratively optimize the parameters of the backpropagation(BP)neural network,thereby enhancing its prediction performance.To address the issue of low accuracy and large errors in traditional received signal strength indication(RSSI),the algorithm first uses the extended Kalman filtering model to smooth the RSSI signal values to suppress the influence of noise and outliers on the estimation results.The processed RSSI values are used as inputs to the neural network,with distance values as outputs,resulting in more accurate ranging results.Finally,the position of the node to be measured is determined by combining the weighted centroid algorithm.Experimental simulation results show that compared to the standard centroid algorithm,weighted centroid algorithm,BP weighted centroid algorithm,and whale optimization algorithm(WOA)-BP weighted centroid algorithm,the proposed algorithm reduces the average localization error by 58.23%,42.71%,31.89%,and 17.57%,respectively,validating the effectiveness and superiority of the algorithm.
基金appreciation to King Saud University for funding this research through the Researchers Supporting Program number(RSPD2024R918),King Saud University,Riyadh,Saudi Arabia.
文摘Wireless Sensor Network(WSNs)consists of a group of nodes that analyze the information from surrounding regions.The sensor nodes are responsible for accumulating and exchanging information.Generally,node local-ization is the process of identifying the target node’s location.In this research work,a Received Signal Strength Indicator(RSSI)-based optimal node localization approach is proposed to solve the complexities in the conventional node localization models.Initially,the RSSI value is identified using the Deep Neural Network(DNN).The RSSI is conceded as the range-based method and it does not require special hardware for the node localization process,also it consumes a very minimal amount of cost for localizing the nodes in 3D WSN.The position of the anchor nodes is fixed for detecting the location of the target.Further,the optimal position of the target node is identified using Hybrid T cell Immune with Lotus Effect Optimization algorithm(HTCI-LEO).During the node localization process,the average localization error is minimized,which is the objective of the optimal node localization.In the regular and irregular surfaces,this hybrid algorithm effectively performs the localization process.The suggested hybrid algorithm converges very fast in the three-dimensional(3D)environment.The accuracy of the proposed node localization process is 94.25%.
文摘Antenna and base-station diversity have been applied to a wireless sensor network for the monitoring of live-stock. A field trial has been described and the advantage to be gained in a practical environment has been assessed.
