Stability assessment is one of the most important issues in mining ground control. Mine development and/or production instability can cause production delay, loss of reserves, as well as injury to miners. Within the s...Stability assessment is one of the most important issues in mining ground control. Mine development and/or production instability can cause production delay, loss of reserves, as well as injury to miners. Within the scope of this study, a series of open stope’s instability under the influence of overlaying mined-out regions were carried out with different mining scenarios at Modi Taung gold mine which is operated by National Prosperity Gold Production Group Limited (NPGPGL) in Myanmar. NPGPGL has been developing stopes up to 150 m from the surface at Shwesin vein system, and the mining activities are going to continue to deeper levels to fulfill the ore mineral supply. Creating a new stope opening under overlaying mined-out regions is not easy considering the instability of mined-out regions can affect the stope. The instability of new stope opening is not only due to its own induced stress but also the strong influence by the mined-out regions situated on upper part of the stope. Therefore, the understandings of ground behaviors and failure mechanisms of new stope opening due to the influence of overlaying mined-out regions are paramount to be studied. This paper describes in detail the strength factor and failure zones under the overlaying mined-out regions with different mine conditions by using numerical simulations, 3D finite difference software (FLAC 3D).展开更多
Stress-induced failure is among the most common causes of instability in Canadian deep underground mines.Open stoping is the most widely practiced underground excavation method in these mines,and creates large stopes ...Stress-induced failure is among the most common causes of instability in Canadian deep underground mines.Open stoping is the most widely practiced underground excavation method in these mines,and creates large stopes which are subjected to stress-induced failure.The probability of failure(POF)depends on many factors,of which the geometry of an open stope is especially important.In this study,a methodology is proposed to assess the effect of stope geometrical parameters on the POF,using numerical modelling.Different ranges for each input parameter are defined according to previous surveys on open stope geometry in a number of Canadian underground mines.A Monte-Carlo simulation technique is combined with the finite difference code FLAC3D,to generate model realizations containing stopes with different geometrical features.The probability of failure(POF)for different categories of stope geometry,is calculated by considering two modes of failure;relaxation-related gravity driven(tensile)failure and rock mass brittle failure.The individual and interactive effects of stope geometrical parameters on the POF,are analyzed using a general multi-level factorial design.Finally,mathematical optimization techniques are employed to estimate the most stable stope conditions,by determining the optimal ranges for each stope’s geometrical parameter.展开更多
Near-surface deposits that extend to considerable depths are often amenable to both open pit mining and/or underground mining.This paper investigates the strategy of mining options for an orebody using a Mixed Integer...Near-surface deposits that extend to considerable depths are often amenable to both open pit mining and/or underground mining.This paper investigates the strategy of mining options for an orebody using a Mixed Integer Linear Programming(MILP)optimization framework.The MILP formulation maximizes the Net Present Value(NPV)of the reserve when extracted with(i)open pit mining,(ii)underground mining,and(iii)concurrent open pit and underground mining.Comparatively,implementing open pit mining generates a higher NPV than underground mining.However considering the investment required for these mining options,underground mining generates a better return on investment than open pit mining.Also,in the concurrent open pit and underground mining scenario,the optimizer prefers extracting blocks using open pit mining.Although the underground mine could access ore sooner,the mining cost differential for open pit mining is more than compensated for by the discounting benefits associated with earlier underground mining.展开更多
The stability of underground excavations has become an important issue in order to extend underground mining operations and extract deeper deposits. The increasing demand for Tin-Tungsten (Sn-W) for industry and its m...The stability of underground excavations has become an important issue in order to extend underground mining operations and extract deeper deposits. The increasing demand for Tin-Tungsten (Sn-W) for industry and its market price has created a motivation for mining companies to extract deep-seated Sn-W ore deposits in Myanmar. Thus, this paper aims to investigate the stability of underground openings, especially, the stope with considering the mining methods. To meet the objective, FLAC<sup>3D</sup> 5.0 simulation was used for the assessment of stope under different stress ratios, 0.5, 1.0, and 1.5 for two types of underground mines;Open stoping and Cut and Fill stoping. The results show that the risk of instability of stope is high under the stress ratio of <em>K</em> = 0.5 than that of <em>K</em> = 1.0 and <em>K</em> = 1.5 in both mining methods. However, the stability of the stope in open stope method is lower than that of cut-and-fill method obviously. This result shows that the appropriate mining method has to be selected for extraction of Sn-W deposit carefully in terms of the balance of safety and cost.展开更多
The flow of blasted ore during mining of moderately dipping medium-thick orebodies is a challenge.Selecting a suitable mining system for such ore bodies is difficult.This paper proposes a diamond layout sublevel open ...The flow of blasted ore during mining of moderately dipping medium-thick orebodies is a challenge.Selecting a suitable mining system for such ore bodies is difficult.This paper proposes a diamond layout sublevel open stoping system using fan blastholes with backfilling to mine such orebodies.To evaluate the performance of system the relationships between ore recovery and stope footwall dip angle,footwall surface roughness,drawpoint spacing and production blast ring burden were investigated.An ore recovery data set from 81 laboratory physical model experiments was established from combinations of the listed factors.Various modules in a back propagation neural network structure were compared,and an optimal network structure identified.An ore recovery backpropagation neural network(BPNN)forecast model was developed.Using the model and sensitivity analysis of the factors affecting the proposed open stope mining system,the significance of each factor on ore recovery was studied.The study results were applied to a case study at the Shandong Gold Group Jiaojia Gold Mine.The results showed that the application of a BPNN and sensitivity analysis models for ore recovery prediction in the proposed mining system and field experimental results confirm that the suggested mining method is feasible.展开更多
文摘Stability assessment is one of the most important issues in mining ground control. Mine development and/or production instability can cause production delay, loss of reserves, as well as injury to miners. Within the scope of this study, a series of open stope’s instability under the influence of overlaying mined-out regions were carried out with different mining scenarios at Modi Taung gold mine which is operated by National Prosperity Gold Production Group Limited (NPGPGL) in Myanmar. NPGPGL has been developing stopes up to 150 m from the surface at Shwesin vein system, and the mining activities are going to continue to deeper levels to fulfill the ore mineral supply. Creating a new stope opening under overlaying mined-out regions is not easy considering the instability of mined-out regions can affect the stope. The instability of new stope opening is not only due to its own induced stress but also the strong influence by the mined-out regions situated on upper part of the stope. Therefore, the understandings of ground behaviors and failure mechanisms of new stope opening due to the influence of overlaying mined-out regions are paramount to be studied. This paper describes in detail the strength factor and failure zones under the overlaying mined-out regions with different mine conditions by using numerical simulations, 3D finite difference software (FLAC 3D).
基金funded by a grant from Natural Sciences and Engineering Research Council of Canada (NSERC)the authors would like to acknowledge the Niobec mine (Saint-Honoré, QuébecQuébec)
文摘Stress-induced failure is among the most common causes of instability in Canadian deep underground mines.Open stoping is the most widely practiced underground excavation method in these mines,and creates large stopes which are subjected to stress-induced failure.The probability of failure(POF)depends on many factors,of which the geometry of an open stope is especially important.In this study,a methodology is proposed to assess the effect of stope geometrical parameters on the POF,using numerical modelling.Different ranges for each input parameter are defined according to previous surveys on open stope geometry in a number of Canadian underground mines.A Monte-Carlo simulation technique is combined with the finite difference code FLAC3D,to generate model realizations containing stopes with different geometrical features.The probability of failure(POF)for different categories of stope geometry,is calculated by considering two modes of failure;relaxation-related gravity driven(tensile)failure and rock mass brittle failure.The individual and interactive effects of stope geometrical parameters on the POF,are analyzed using a general multi-level factorial design.Finally,mathematical optimization techniques are employed to estimate the most stable stope conditions,by determining the optimal ranges for each stope’s geometrical parameter.
基金funding support provided by the Laurentian University Research Fund for the compilation of this report
文摘Near-surface deposits that extend to considerable depths are often amenable to both open pit mining and/or underground mining.This paper investigates the strategy of mining options for an orebody using a Mixed Integer Linear Programming(MILP)optimization framework.The MILP formulation maximizes the Net Present Value(NPV)of the reserve when extracted with(i)open pit mining,(ii)underground mining,and(iii)concurrent open pit and underground mining.Comparatively,implementing open pit mining generates a higher NPV than underground mining.However considering the investment required for these mining options,underground mining generates a better return on investment than open pit mining.Also,in the concurrent open pit and underground mining scenario,the optimizer prefers extracting blocks using open pit mining.Although the underground mine could access ore sooner,the mining cost differential for open pit mining is more than compensated for by the discounting benefits associated with earlier underground mining.
文摘The stability of underground excavations has become an important issue in order to extend underground mining operations and extract deeper deposits. The increasing demand for Tin-Tungsten (Sn-W) for industry and its market price has created a motivation for mining companies to extract deep-seated Sn-W ore deposits in Myanmar. Thus, this paper aims to investigate the stability of underground openings, especially, the stope with considering the mining methods. To meet the objective, FLAC<sup>3D</sup> 5.0 simulation was used for the assessment of stope under different stress ratios, 0.5, 1.0, and 1.5 for two types of underground mines;Open stoping and Cut and Fill stoping. The results show that the risk of instability of stope is high under the stress ratio of <em>K</em> = 0.5 than that of <em>K</em> = 1.0 and <em>K</em> = 1.5 in both mining methods. However, the stability of the stope in open stope method is lower than that of cut-and-fill method obviously. This result shows that the appropriate mining method has to be selected for extraction of Sn-W deposit carefully in terms of the balance of safety and cost.
基金funded by the State Key Research Development Program of China(2018YFC0604400)the National Science Foundation of China(No.51874068)+2 种基金the Fundamental Research Funds for the Central Universities(N160107001,N180701016)the 111 Project(B17009)Nazarbayev University for the Faculty Development Competitive Research Grant(240919FD3920)。
文摘The flow of blasted ore during mining of moderately dipping medium-thick orebodies is a challenge.Selecting a suitable mining system for such ore bodies is difficult.This paper proposes a diamond layout sublevel open stoping system using fan blastholes with backfilling to mine such orebodies.To evaluate the performance of system the relationships between ore recovery and stope footwall dip angle,footwall surface roughness,drawpoint spacing and production blast ring burden were investigated.An ore recovery data set from 81 laboratory physical model experiments was established from combinations of the listed factors.Various modules in a back propagation neural network structure were compared,and an optimal network structure identified.An ore recovery backpropagation neural network(BPNN)forecast model was developed.Using the model and sensitivity analysis of the factors affecting the proposed open stope mining system,the significance of each factor on ore recovery was studied.The study results were applied to a case study at the Shandong Gold Group Jiaojia Gold Mine.The results showed that the application of a BPNN and sensitivity analysis models for ore recovery prediction in the proposed mining system and field experimental results confirm that the suggested mining method is feasible.
