The present paper proposes three-dimensional model necessary to calculate the transient temperature field in a journal bearing submitted to a sudden change in speed and load and analyzes the bearing performance numeri...The present paper proposes three-dimensional model necessary to calculate the transient temperature field in a journal bearing submitted to a sudden change in speed and load and analyzes the bearing performance numerically. Thermal deformation of the bush and realistic thermal boundary conditions at oil and bush interface are considered. At each time step a Newton-Raphson method is used to solve the Reynolds equation, film thickness equation and the motion equation of the journal simultaneously to obtain the pressure distribution and the velocity of the journal center. Then the fluid film force is acquired through integral of fluid film force and the acceleration and position of the journal center are acquired through differences of the velocity. The energy equations of the oil film and the bush are solved simultaneously by using an efficient finite difference scheme. Then the transient three dimensional temperature field of the bearing is acquired by combining the energy equations and the Reynolds equation through the nodal temperature and pressure. It is found that the approaches introduced here converge quickly and save calculation time greatly.展开更多
Applications of certain multi-parameter acceleration techniques used with themodified New-ton-Raphson (mN-R) methods to solve the nonlinear equations arising from rigid-plasticfinite element analysis are investigated....Applications of certain multi-parameter acceleration techniques used with themodified New-ton-Raphson (mN-R) methods to solve the nonlinear equations arising from rigid-plasticfinite element analysis are investigated. New modified multi-parameter techniques, developed fromCrisfield's multi-parameter methods, are utilized to solve these nonlinear equations. The numericalperformance of these techniques is compared with the standard Newton-Raphson method (sN-R),Crisfield's single parameter method (C1), Crisfield's two parameter method (C2) and Crisfield'sthree parameter method (C3). The new techniques do not involve additional residual force calculationand require little extra computational effort. In addition, they are more robust and efficient thanother existing acceleration techniques.展开更多
The division operation is not frequent relatively in traditional applications, but it is increasingly indispensable and important in many modern applications. In this paper, the implementation of modified signed-digit...The division operation is not frequent relatively in traditional applications, but it is increasingly indispensable and important in many modern applications. In this paper, the implementation of modified signed-digit （MSD） floating-point division using Newton-Raphson method on the system of ternary optical computer （TOC） is studied. Since the addition of MSD floating-point is carry-free and the digit width of the system of TOC is large, it is easy to deal with the enough wide data and transform the division operation into multiplication and addition operations. And using data scan and truncation the problem of digits expansion is effectively solved in the range of error limit. The division gets the good results and the efficiency is high. The instance of MSD floating-point division shows that the method is feasible.展开更多
The current theory in NF EN 1995-1-1/NA of Eurocode 5, which is based on maximum deflection, has been investigated on softwoods. Therefore, this theory is not adapted for slender glulam beam columns made of tropical h...The current theory in NF EN 1995-1-1/NA of Eurocode 5, which is based on maximum deflection, has been investigated on softwoods. Therefore, this theory is not adapted for slender glulam beam columns made of tropical hardwood species from the Congo Basin. This maximum deflection is caused by a set of loads applied to the structure. However, Eurocode 5 doesn’t provide how to predict this deflection in case of long-term load for such structures. This can be done by studying load-displacement (P-Δ) behaviour of these structures while taking into account second order effects. To reach this goal, a nonlinear analysis has been performed on a three-dimensional beam column embedded on both ends. Since conducting experimental investigations on large span structural products is time-consuming and expensive especially in developing countries, a numerical model has been implemented using the Newton-Raphson method to predict load-displacement (P-Δ) curve on a slender glulam beam column made of tropical hardwood species. On one hand, the beam has been analyzed without wood connection. On the other hand, the beam has been analyzed with a bolted wood connection and a slotted-in steel plate. The load cases considered include self-weight and a uniformly applied long-term load. Combinations of serviceability limit states (SLS) and ultimate limit states (ULS) have also been considered, among other factors. A finite-element software RFEM 5 has been used to implement the model. The results showed that the use of steel can reduce displacement by 20.96%. Additionally, compared to the maximum deflection provided by Eurocode 5 for softwoods, hardwoods can exhibit an increasing rate of 85.63%. By harnessing the plastic resistance of steel, the bending resistance of wood can be increased by 32.94%.展开更多
In order to obtain direct solutions of parallel manipulator without divergence in real time,a modified global Newton-Raphson(MGNR) algorithm was proposed for forward kinematics analysis of six-degree-of-freedom(DOF) p...In order to obtain direct solutions of parallel manipulator without divergence in real time,a modified global Newton-Raphson(MGNR) algorithm was proposed for forward kinematics analysis of six-degree-of-freedom(DOF) parallel manipulator.Based on geometrical frame of parallel manipulator,the highly nonlinear equations of kinematics were derived using analytical approach.The MGNR algorithm was developed for the nonlinear equations based on Tailor expansion and Newton-Raphson iteration.The procedure of MGNR algorithm was programmed in Matlab/Simulink and compiled to a real-time computer with Microsoft visual studio.NET for implementation.The performance of the MGNR algorithms for 6-DOF parallel manipulator was analyzed and confirmed.Applying the MGNR algorithm,the real generalized pose of moving platform is solved by using the set of given positions of actuators.The theoretical analysis and numerical results indicate that the presented method can achieve the numerical convergent solution in less than 1 ms with high accuracy(1×10-9 m in linear motion and 1×10-9 rad in angular motion),even the initial guess value is far from the root.展开更多
Problems in mechanism analysis and synthesis and robotics lead naturally to systems of nonlinear equations. In this paper, an approach based on Newton Raphson method and the property of fractals is presented to obtain...Problems in mechanism analysis and synthesis and robotics lead naturally to systems of nonlinear equations. In this paper, an approach based on Newton Raphson method and the property of fractals is presented to obtaining all roots of equation. An example from plane mechanism synthesis is given to demonstrate the idea of the method.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of...Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of informing the optimization of disclosure processes and meeting the communication needs of affected families.Methods In accordance with the Joanna Briggs Institute(JBI)methodology for mixed methods systematic reviews,the convergent segregated approach was used in this review.Articles were retrieved from 11 databases,including PubMed,Web of Science,CINAHL,CENTRAL,Embase,Ovid/Medline,PsycINFO,PsycArticles,Scopus,ERIC,and China National Knowledge Infrastructure(CNKI).The quality of the selected articles was assessed using the Mixed Method Appraisal Tool(MMAT).The review protocol was registered on PROSPERO(CRD42024542746).Results A total of 21 studies from 10 countries were included.Their methodological quality was generally medium to high,with MMAT scores ranging from 60%to 100%.The synthesis yielded three core themes:1)the spectrum of professional and societal attitudes toward disclosure;2)the dynamic practices of navigating disclosure amid uncertainty,including timing and environment,stakeholders,and content of disclosure;and 3)factors influencing disclosure,including children’s,parental,healthcare professionals’,and socio-cultural factors.Conclusions This review synthesized the perspectives and experiences of healthcare professionals regarding disclosure in childhood cancer,highlighting the complexity and multidimensional nature of this process in clinical practice.Future research should further investigate the experiences and needs of children and their parents,explore cultural variations in disclosure practices,develop context-appropriate assessment tools,and construct multidimensional intervention strategies to enhance the humanistic care and professional effectiveness of the disclosure process.展开更多
As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalen...As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).展开更多
The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to...The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to analyze the methods of its English-to-Chinese subtitle translation by considering social,cultural,and historic backgrounds between China and America.After data collection and case analysis,the study found that:(1)Five major translation methods are adopted in the subtitle translation of The Good Wife.They are free translation,variation,literal translation,addition,and omission.Among them,free translation is the most frequently used,while omission is used least.(2)The subtitle translation of films and TV series is limited by time and space restrictions,social-cultural differences,and other factors.When translating,translators should try to use humorous words,euphemism,intonation,and other ways,and combine different methods such as literal translation,free translation,variation,addition,omission,and other methods to seek equivalence both in the meaning and function of subtitles under the guidance of Functional Equivalence Theory.展开更多
This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture ...This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture the anisotropic evolution and destructuring nature of soft clays.By integrating the S-CLAY1S model into the theoretical framework of the SPM,a set of ordinary differential equations is formulated with respect to the vertical coordinate of soil particles.The distribution of excess pore water pressure(EPWP)following pile installation is approximated through one-dimensional(1D)radial integration around the pile shaft.The distribution of stresses and EPWP,along with the evolution of fabric anisotropy within the soil surrounding the pile,is presented to illustrate the response of pile penetration in natural soft clays.The proposed solution is validated against existing theoretical solutions using the SPM and cavity expansion method(CEM),along with experimental data.The findings demonstrate that the SPM reveals lower radial effective stresses and EPWP at the pile shaft than that of CEM.Pile penetration alters the soil's anisotropic properties,inducing rotational hardening and affecting post-installation stress distribution.Soil destructuration eliminates bonding among particles near the pile,resulting in a complete disruption of soil structure at the pile surface,which is particularly pronounced for higher initial soil structure ratios.Minimal variation was observed in the three principal stresses and shear stress on the cone side surface as the angle increased from 18°to 60°,except for a slight reduction in EPWP.展开更多
In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical m...In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.展开更多
Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recov...Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery. We first derive the projection formulas for a vector onto the feasible sets. The centralized circumcentered-reflection method is designed to solve the convex feasibility problem. Some numerical experiments demonstrate the feasibility and effectiveness of the proposed algorithm, showing superior performance compared to conventional alternating projection methods.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-r...To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.展开更多
In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress res...In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress resultant formulation is developed within the HQEM framework,consequently significantly simplifying the computations of residual force and stiffness matrix.The present formulation inherently avoids shear and membrane locking,benefiting from its high-order approximation property.Furthermore,HQEM’s independent nodal distribution capability conveniently supports local p-refinement and flexibly facilitates mesh generation in various structural configurations through the combination of quadrilateral and triangular elements.Remarkably,in lateral buckling analysis,the HQEM outperforms the weak-form quadrilateral element(QEM)in accuracy with identical nodal degrees of freedom(three displacements and two rotations).Under high-load nonlinear response,the QEM exhibits a maximum relative deviation of approximately 9.5%from the reference,while the HQEM remains closely aligned with the benchmark results.In addition,for the cantilever beam under tip moment,HQEM produces virtually no out-of-plane deviation,compared to a slight deviation of 0.00001 with QEM,confirming its superior numerical reliability.In summary,the method demonstrates high accuracy,superior convergence,and robustness in handling large rotations and complex post-buckling behaviors across a series of benchmark problems.展开更多
Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects exte...Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects extend into deeper and more mountainous terrains,engineers face increasingly complex geological conditions,including high water pressure,intense geo-stress,elevated geothermal gradients,and active fault zones.These conditions pose substantial risks such as high-pressure water inrush,largescale collapses,and tunnel boring machine(TBM)blockages.Addressing these challenges requires advanced detection technologies capable of long-distance,high-precision,and intelligent assessments of adverse geology.This paper presents a comprehensive review of recent advancements in tunnel geological ahead prospecting methods.It summarizes the fundamental principles,technical maturity,key challenges,development trends,and real-world applications of various detection techniques.Airborne and semi-airborne geophysical methods enable large-scale reconnaissance for initial surveys in complex terrain.Tunnel-and borehole-based approaches offer high-resolution detection during excavation,including seismic ahead prospecting(SAP),TBM rock-breaking source seismic methods,fulltime-domain tunnel induced polarization(TIP),borehole electrical resistivity,and ground penetrating radar(GPR).To address scenarios involving multiple,coexisting adverse geologies,intelligent inversion and geological identification methods have been developed based on multi-source data fusion and artificial intelligence(AI)techniques.Overall,these advances significantly improve detection range,resolution,and geological characterization capabilities.The methods demonstrate strong adaptability to complex environments and provide reliable subsurface information,supporting safer and more efficient tunnel construction.展开更多
Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have becom...Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have become major challenges in forestry research.In this study,we selected the Shaanxi-Gansu-Ningxia region of Northeast China as the research area and utilized multi-source datasets from the summer of 2019 to extract information on spectral,textural,climatic,water balance,and stand characteristics.By integrating the Random Forest(RF)model with Monte Carlo(MC)simulation,we constructed six regression models based on different combina-tions of features and evaluated the uncertainty of each model.Furthermore,we investigated the driving factors influencing stand age modeling by analyzing the effects of different types of features on age inversion.Model performance and accuracy were assessed using the root mean square error(RMSE),mean absolute error(MAE),and the coefficient of determination(R^(2)),while the relative root mean square error(rRMSE)was employed to quantify model uncertainty.The results indicate that the scenarios with more obvious improve-ment in accuracy and effective reduction in uncertainty were Scenario 3 with the inclusion of climate and water balance information(RMSE=25.54 yr,MAE=18.03 yr,R^(2)=0.51,rRMSE=19.17%)and Scenario 5 with the inclusion of stand characterization informa-tion(RMSE=18.47 yr,MAE=13.05 yr,R^(2)=0.74,rRMSE=16.99%).Scenario 6,incorporating all feature types,achieved the highest accuracy(RMSE=17.60 yr,MAE=12.06 yr,R^(2)=0.77,rRMSE=14.19%).In this study,elevation,minimum temperature,and diameter at breast height(DBH)emerged as the key drivers of stand-age modeling.The proposed method can be used to identify drivers and to quantify uncertainty in stand-age estimation,providing a useful reference for improving model accuracy and uncertainty assessment.展开更多
Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters accordi...Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.展开更多
文摘The present paper proposes three-dimensional model necessary to calculate the transient temperature field in a journal bearing submitted to a sudden change in speed and load and analyzes the bearing performance numerically. Thermal deformation of the bush and realistic thermal boundary conditions at oil and bush interface are considered. At each time step a Newton-Raphson method is used to solve the Reynolds equation, film thickness equation and the motion equation of the journal simultaneously to obtain the pressure distribution and the velocity of the journal center. Then the fluid film force is acquired through integral of fluid film force and the acceleration and position of the journal center are acquired through differences of the velocity. The energy equations of the oil film and the bush are solved simultaneously by using an efficient finite difference scheme. Then the transient three dimensional temperature field of the bearing is acquired by combining the energy equations and the Reynolds equation through the nodal temperature and pressure. It is found that the approaches introduced here converge quickly and save calculation time greatly.
文摘Applications of certain multi-parameter acceleration techniques used with themodified New-ton-Raphson (mN-R) methods to solve the nonlinear equations arising from rigid-plasticfinite element analysis are investigated. New modified multi-parameter techniques, developed fromCrisfield's multi-parameter methods, are utilized to solve these nonlinear equations. The numericalperformance of these techniques is compared with the standard Newton-Raphson method (sN-R),Crisfield's single parameter method (C1), Crisfield's two parameter method (C2) and Crisfield'sthree parameter method (C3). The new techniques do not involve additional residual force calculationand require little extra computational effort. In addition, they are more robust and efficient thanother existing acceleration techniques.
基金Project supported by the Shanghai Leading Academic Discipline Project(Grant No.J50103)the National Natural Science Foundation of China(Grant No.61073049)
文摘The division operation is not frequent relatively in traditional applications, but it is increasingly indispensable and important in many modern applications. In this paper, the implementation of modified signed-digit （MSD） floating-point division using Newton-Raphson method on the system of ternary optical computer （TOC） is studied. Since the addition of MSD floating-point is carry-free and the digit width of the system of TOC is large, it is easy to deal with the enough wide data and transform the division operation into multiplication and addition operations. And using data scan and truncation the problem of digits expansion is effectively solved in the range of error limit. The division gets the good results and the efficiency is high. The instance of MSD floating-point division shows that the method is feasible.
文摘The current theory in NF EN 1995-1-1/NA of Eurocode 5, which is based on maximum deflection, has been investigated on softwoods. Therefore, this theory is not adapted for slender glulam beam columns made of tropical hardwood species from the Congo Basin. This maximum deflection is caused by a set of loads applied to the structure. However, Eurocode 5 doesn’t provide how to predict this deflection in case of long-term load for such structures. This can be done by studying load-displacement (P-Δ) behaviour of these structures while taking into account second order effects. To reach this goal, a nonlinear analysis has been performed on a three-dimensional beam column embedded on both ends. Since conducting experimental investigations on large span structural products is time-consuming and expensive especially in developing countries, a numerical model has been implemented using the Newton-Raphson method to predict load-displacement (P-Δ) curve on a slender glulam beam column made of tropical hardwood species. On one hand, the beam has been analyzed without wood connection. On the other hand, the beam has been analyzed with a bolted wood connection and a slotted-in steel plate. The load cases considered include self-weight and a uniformly applied long-term load. Combinations of serviceability limit states (SLS) and ultimate limit states (ULS) have also been considered, among other factors. A finite-element software RFEM 5 has been used to implement the model. The results showed that the use of steel can reduce displacement by 20.96%. Additionally, compared to the maximum deflection provided by Eurocode 5 for softwoods, hardwoods can exhibit an increasing rate of 85.63%. By harnessing the plastic resistance of steel, the bending resistance of wood can be increased by 32.94%.
基金Project(HgdJG00401D04) supported by National 921 Manned Space Project Foundation of ChinaProject(SKLRS200803B) supported by the Self-Planned Task Foundation of State Key Laboratory of Robotics and System (HIT) of China+1 种基金Project(CDAZ98502211) supported by China’s "World Class University (985)" Project FoundationProject(50975055) supported by the National Natural Science Foundation of China
文摘In order to obtain direct solutions of parallel manipulator without divergence in real time,a modified global Newton-Raphson(MGNR) algorithm was proposed for forward kinematics analysis of six-degree-of-freedom(DOF) parallel manipulator.Based on geometrical frame of parallel manipulator,the highly nonlinear equations of kinematics were derived using analytical approach.The MGNR algorithm was developed for the nonlinear equations based on Tailor expansion and Newton-Raphson iteration.The procedure of MGNR algorithm was programmed in Matlab/Simulink and compiled to a real-time computer with Microsoft visual studio.NET for implementation.The performance of the MGNR algorithms for 6-DOF parallel manipulator was analyzed and confirmed.Applying the MGNR algorithm,the real generalized pose of moving platform is solved by using the set of given positions of actuators.The theoretical analysis and numerical results indicate that the presented method can achieve the numerical convergent solution in less than 1 ms with high accuracy(1×10-9 m in linear motion and 1×10-9 rad in angular motion),even the initial guess value is far from the root.
基金Supported by the National Natural Science Foundation of China(No.59975077)the Science Foundation of SWJTU(No.1999XM05)
文摘Problems in mechanism analysis and synthesis and robotics lead naturally to systems of nonlinear equations. In this paper, an approach based on Newton Raphson method and the property of fractals is presented to obtaining all roots of equation. An example from plane mechanism synthesis is given to demonstrate the idea of the method.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金supported by the Fuxing Nursing Research Foundation of Fudan University[FNF202352].
文摘Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of informing the optimization of disclosure processes and meeting the communication needs of affected families.Methods In accordance with the Joanna Briggs Institute(JBI)methodology for mixed methods systematic reviews,the convergent segregated approach was used in this review.Articles were retrieved from 11 databases,including PubMed,Web of Science,CINAHL,CENTRAL,Embase,Ovid/Medline,PsycINFO,PsycArticles,Scopus,ERIC,and China National Knowledge Infrastructure(CNKI).The quality of the selected articles was assessed using the Mixed Method Appraisal Tool(MMAT).The review protocol was registered on PROSPERO(CRD42024542746).Results A total of 21 studies from 10 countries were included.Their methodological quality was generally medium to high,with MMAT scores ranging from 60%to 100%.The synthesis yielded three core themes:1)the spectrum of professional and societal attitudes toward disclosure;2)the dynamic practices of navigating disclosure amid uncertainty,including timing and environment,stakeholders,and content of disclosure;and 3)factors influencing disclosure,including children’s,parental,healthcare professionals’,and socio-cultural factors.Conclusions This review synthesized the perspectives and experiences of healthcare professionals regarding disclosure in childhood cancer,highlighting the complexity and multidimensional nature of this process in clinical practice.Future research should further investigate the experiences and needs of children and their parents,explore cultural variations in disclosure practices,develop context-appropriate assessment tools,and construct multidimensional intervention strategies to enhance the humanistic care and professional effectiveness of the disclosure process.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272393 and 52130905).
文摘As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).
文摘The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to analyze the methods of its English-to-Chinese subtitle translation by considering social,cultural,and historic backgrounds between China and America.After data collection and case analysis,the study found that:(1)Five major translation methods are adopted in the subtitle translation of The Good Wife.They are free translation,variation,literal translation,addition,and omission.Among them,free translation is the most frequently used,while omission is used least.(2)The subtitle translation of films and TV series is limited by time and space restrictions,social-cultural differences,and other factors.When translating,translators should try to use humorous words,euphemism,intonation,and other ways,and combine different methods such as literal translation,free translation,variation,addition,omission,and other methods to seek equivalence both in the meaning and function of subtitles under the guidance of Functional Equivalence Theory.
基金support from the National Natural Science Foundation of China(Grant No.42407256)the State Key Laboratory of Hydraulics and Mountain River Engineering,China(Grant No.SKHL2113)the Sichuan Science and Technology Program(Grant No.2024YFHZ0341).
文摘This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture the anisotropic evolution and destructuring nature of soft clays.By integrating the S-CLAY1S model into the theoretical framework of the SPM,a set of ordinary differential equations is formulated with respect to the vertical coordinate of soil particles.The distribution of excess pore water pressure(EPWP)following pile installation is approximated through one-dimensional(1D)radial integration around the pile shaft.The distribution of stresses and EPWP,along with the evolution of fabric anisotropy within the soil surrounding the pile,is presented to illustrate the response of pile penetration in natural soft clays.The proposed solution is validated against existing theoretical solutions using the SPM and cavity expansion method(CEM),along with experimental data.The findings demonstrate that the SPM reveals lower radial effective stresses and EPWP at the pile shaft than that of CEM.Pile penetration alters the soil's anisotropic properties,inducing rotational hardening and affecting post-installation stress distribution.Soil destructuration eliminates bonding among particles near the pile,resulting in a complete disruption of soil structure at the pile surface,which is particularly pronounced for higher initial soil structure ratios.Minimal variation was observed in the three principal stresses and shear stress on the cone side surface as the angle increased from 18°to 60°,except for a slight reduction in EPWP.
基金supported by Anhui Provincial Natural Science Foundation(2408085QA030)Natural Science Research Project of Anhui Educational Committee,China(2022AH050825)+3 种基金Medical Special Cultivation Project of Anhui University of Science and Technology(YZ2023H2C008)the Excellent Research and Innovation Team of Anhui Province,China(2022AH010052)the Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology,China(2021yjrc51)Collaborative Innovation Program of Hefei Science Center,CAS,China(2019HSC-CIP006).
文摘In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.
基金Supported by the Natural Science Foundation of Guangxi Province(Grant Nos.2023GXNSFAA026067,2024GXN SFAA010521)the National Natural Science Foundation of China(Nos.12361079,12201149,12261026).
文摘Convex feasibility problems are widely used in image reconstruction, sparse signal recovery, and other areas. This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery. We first derive the projection formulas for a vector onto the feasible sets. The centralized circumcentered-reflection method is designed to solve the convex feasibility problem. Some numerical experiments demonstrate the feasibility and effectiveness of the proposed algorithm, showing superior performance compared to conventional alternating projection methods.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by the National Natural Science Foundation of China(Grant No.52339001).
文摘To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.
基金supported by the National Natural Science Foundation of China(Grant Nos.12472194,12002018,11972004,11772031,11402015).
文摘In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress resultant formulation is developed within the HQEM framework,consequently significantly simplifying the computations of residual force and stiffness matrix.The present formulation inherently avoids shear and membrane locking,benefiting from its high-order approximation property.Furthermore,HQEM’s independent nodal distribution capability conveniently supports local p-refinement and flexibly facilitates mesh generation in various structural configurations through the combination of quadrilateral and triangular elements.Remarkably,in lateral buckling analysis,the HQEM outperforms the weak-form quadrilateral element(QEM)in accuracy with identical nodal degrees of freedom(three displacements and two rotations).Under high-load nonlinear response,the QEM exhibits a maximum relative deviation of approximately 9.5%from the reference,while the HQEM remains closely aligned with the benchmark results.In addition,for the cantilever beam under tip moment,HQEM produces virtually no out-of-plane deviation,compared to a slight deviation of 0.00001 with QEM,confirming its superior numerical reliability.In summary,the method demonstrates high accuracy,superior convergence,and robustness in handling large rotations and complex post-buckling behaviors across a series of benchmark problems.
基金supported by the National Natural Science Foundation of China(Grant Nos.52021005,52325904,and 51991391)。
文摘Geological prospecting and the identification of adverse geological features are essential in tunnel construction,providing critical information to ensure safety and guide engineering decisions.As tunnel projects extend into deeper and more mountainous terrains,engineers face increasingly complex geological conditions,including high water pressure,intense geo-stress,elevated geothermal gradients,and active fault zones.These conditions pose substantial risks such as high-pressure water inrush,largescale collapses,and tunnel boring machine(TBM)blockages.Addressing these challenges requires advanced detection technologies capable of long-distance,high-precision,and intelligent assessments of adverse geology.This paper presents a comprehensive review of recent advancements in tunnel geological ahead prospecting methods.It summarizes the fundamental principles,technical maturity,key challenges,development trends,and real-world applications of various detection techniques.Airborne and semi-airborne geophysical methods enable large-scale reconnaissance for initial surveys in complex terrain.Tunnel-and borehole-based approaches offer high-resolution detection during excavation,including seismic ahead prospecting(SAP),TBM rock-breaking source seismic methods,fulltime-domain tunnel induced polarization(TIP),borehole electrical resistivity,and ground penetrating radar(GPR).To address scenarios involving multiple,coexisting adverse geologies,intelligent inversion and geological identification methods have been developed based on multi-source data fusion and artificial intelligence(AI)techniques.Overall,these advances significantly improve detection range,resolution,and geological characterization capabilities.The methods demonstrate strong adaptability to complex environments and provide reliable subsurface information,supporting safer and more efficient tunnel construction.
基金Under the auspices of the Natural Science Foundation of China(No.32371875,32001249)。
文摘Stand age plays a crucial role in forest biomass estimation and carbon cycle modeling.Assessing the uncertainty of stand age prediction models and identifying the key driving factors in the modeling process have become major challenges in forestry research.In this study,we selected the Shaanxi-Gansu-Ningxia region of Northeast China as the research area and utilized multi-source datasets from the summer of 2019 to extract information on spectral,textural,climatic,water balance,and stand characteristics.By integrating the Random Forest(RF)model with Monte Carlo(MC)simulation,we constructed six regression models based on different combina-tions of features and evaluated the uncertainty of each model.Furthermore,we investigated the driving factors influencing stand age modeling by analyzing the effects of different types of features on age inversion.Model performance and accuracy were assessed using the root mean square error(RMSE),mean absolute error(MAE),and the coefficient of determination(R^(2)),while the relative root mean square error(rRMSE)was employed to quantify model uncertainty.The results indicate that the scenarios with more obvious improve-ment in accuracy and effective reduction in uncertainty were Scenario 3 with the inclusion of climate and water balance information(RMSE=25.54 yr,MAE=18.03 yr,R^(2)=0.51,rRMSE=19.17%)and Scenario 5 with the inclusion of stand characterization informa-tion(RMSE=18.47 yr,MAE=13.05 yr,R^(2)=0.74,rRMSE=16.99%).Scenario 6,incorporating all feature types,achieved the highest accuracy(RMSE=17.60 yr,MAE=12.06 yr,R^(2)=0.77,rRMSE=14.19%).In this study,elevation,minimum temperature,and diameter at breast height(DBH)emerged as the key drivers of stand-age modeling.The proposed method can be used to identify drivers and to quantify uncertainty in stand-age estimation,providing a useful reference for improving model accuracy and uncertainty assessment.
基金supported by the Innovation Foundation of Provincial Education Department of Gansu(2024B-005)the Gansu Province National Science Foundation(22YF7GA182)the Fundamental Research Funds for the Central Universities(No.lzujbky2022-kb01)。
文摘Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.
