期刊文献+
共找到789,995篇文章
< 1 2 250 >
每页显示 20 50 100
基于AHP-EWM联合赋权优化补骨脂酚脂质体的制备及其延缓皮肤衰老作用
1
作者 万鹏鹤 吕宁 +3 位作者 毛明慧 于海英 薛超越 李启艳 《日用化学工业(中英文)》 北大核心 2026年第2期217-225,共9页
以包封率、粒径、Zeta电位及多分散系数(PDI)为评价指标,采用层次分析法(AHP)联合熵权法(EWM)对各项指标进行科学赋权,运用响应面试验设计优化脂质体制备工艺,并利用透射电子显微镜(TEM)等技术对脂质体形态进行表征。经实验验证,较佳脂... 以包封率、粒径、Zeta电位及多分散系数(PDI)为评价指标,采用层次分析法(AHP)联合熵权法(EWM)对各项指标进行科学赋权,运用响应面试验设计优化脂质体制备工艺,并利用透射电子显微镜(TEM)等技术对脂质体形态进行表征。经实验验证,较佳脂质体制备工艺条件为:水化时间45 min、卵磷脂与补骨脂酚质量比8∶1、水化温度45℃、卵磷脂与胆固醇质量比4∶1。在此条件下制备的脂质体粒径为(177.52±5.22)nm,多分散指数(PDI)为0.36±0.05,Zeta电位为(-45.60±3.68)mV,表明脂质体粒径分布均匀、稳定性良好且具有适宜的表面电荷。基于UVA照射人皮肤成纤维细胞(HSF)构建光老化细胞模型,通过CCK-8试验评估细胞活性,利用活性氧(ROS)、超氧化物歧化酶(SOD)和过氧化氢酶(CAT)检测分析光老化损伤及药物干预效果。研究发现,UVA辐射剂量为5 J/cm^(2)时可有效诱导细胞光老化,而补骨脂酚脂质体(Bak-lip)在0~10μg/mL质量浓度范围内对细胞无明显毒性,且能显著降低光老化细胞内ROS水平,增强SOD和CAT活性,其中以5μg/mL Bak-lip效果最为显著(p<0.05)。相较于游离补骨脂酚,Bak-lip通过将补骨脂酚包封于脂质体囊泡结构中,由于脂质体的双分子层结构能够有效包裹补骨脂酚,从而改善其水溶性;同时,脂质体的保护作用减少了补骨脂酚在外界环境因素影响下的活性损失,使其抗氧化功能得以更稳定地发挥。 展开更多
关键词 补骨脂酚 脂质体 光老化 层次分析法(AHP) 熵权法(ewm)
在线阅读 下载PDF
基于AHP-EWM-TOPSIS模型的北疆滴灌春玉米水氮定额管理效应分析
2
作者 秦达 李小龙 +5 位作者 何新林 王春霞 俞靖 范子康 杨跃发 王宏鑫 《中国农业科技导报(中英文)》 北大核心 2026年第4期250-265,共16页
为应对干旱内陆河流域夏季农业用水供需紧张的矛盾,提高滴灌春玉米水氮利用效率,以滴灌春玉米为研究对象,在新疆奇台县半截沟镇腰站子村进行田间试验,设置3600(W1)、3300(W2)、3000(W3)、2700(W4)、2400 m^(3)·hm^(-2)(W5)5个灌水... 为应对干旱内陆河流域夏季农业用水供需紧张的矛盾,提高滴灌春玉米水氮利用效率,以滴灌春玉米为研究对象,在新疆奇台县半截沟镇腰站子村进行田间试验,设置3600(W1)、3300(W2)、3000(W3)、2700(W4)、2400 m^(3)·hm^(-2)(W5)5个灌水水平和461(N1)、428(N2)、394 kg·hm^(-2)(N3)3个施氮水平,探究偏低水氮管理对春玉米产量、水分利用效率(water use efficiency,WUE)和氮肥偏生产力(partial factor productivity from nitrogen fertilizer,PFPN)的影响,并对较低限额灌水施肥方案进行优选。结果表明,玉米株高、茎粗、叶面积指数及地上部干物质量均呈现随灌溉定额的增加而增加、随施氮量增加先增加后减少的趋势,其中W1N2处理表现最优。随着灌溉定额的增加,产量和PFPN呈不断增加的趋势,WUE呈不断降低的趋势;随着施氮量的增加,产量和WUE呈先增加后减少的趋势,PFPN呈不断降低的趋势。W1N2处理的产量最高(19250 kg·hm^(-2)),W5N2处理的WUE最高(4.52 kg·m^(-3)),W1N2处理的PFPN最高(44.77 kg·kgg^(-1))。基于水分利用效率、净利润、产投比等15个指标层构建的层次分析法-熵权法-优劣解距离向量法(analytic hierarchy process-entropy weight method-technique for order preference by similarity to an ieded solution,AHP-EWM-TOPSIS)模型评价结果可知,灌溉定额3000~3600 m^(3)·hm^(-2)、施氮量394~428 kg·hm^(-2)为推荐的低水氮定额管理方案,此时产量达17010~19250 kg·hm^(-2),WUE为3.69~4.14 kg·m^(-3),PFPN为22.89~25.67 kg·kgg^(-1),该方法为作物生长综合效益提供了一种可靠的评价体系。研究结果为干旱区滴灌春玉米水氮配施策略的制定提供模型与数据参考,对实现农业生态经济效益最大化具有重要意义。 展开更多
关键词 滴灌 低水氮定额 AHP-ewm-TOPSIS模型 管理方案 春玉米
在线阅读 下载PDF
基于FKM-AHP-EWM-TOPSIS模型的汽车客运站候车座椅设计与评价
3
作者 和华雪 章梦奇 《包装工程》 北大核心 2026年第4期279-290,共12页
目的为提升产品设计的科学性,提出了基于FKM-AHP-EWM-TOPSIS的综合模型,应用于汽车客运站候车座椅的设计与评价。方法首先通过用户访谈以及KJ法获取原始设计需求池,经由FKM对设计需求进行类别属性划分;然后基于AHP和EWM求解出各项设计... 目的为提升产品设计的科学性,提出了基于FKM-AHP-EWM-TOPSIS的综合模型,应用于汽车客运站候车座椅的设计与评价。方法首先通过用户访谈以及KJ法获取原始设计需求池,经由FKM对设计需求进行类别属性划分;然后基于AHP和EWM求解出各项设计需求主客观组合权重,在此基础上引入权重融合函数将用户满意度意见融入设计需求最终权重的求解过程中,以融合多方诉求指导方案设计;最后运用TOPSIS对三款汽车客运站候车座椅设计方案与一款现有座椅进行排序,识别出最佳方案。结论将FKM-AHP-EWM-TOPSIS模型应用于汽车客运站候车座椅设计分析中,不仅能有效设计出符合用户期望的候车座椅,满足用户的多重需求,还能从众多设计方案中识别出最佳方案,为设计人员在客运站候车座椅设计过程中提供决策依据,同时融合主客观多维数据的分析方法使得权重的确定过程更加合理,更能检验设计方案的针对性与有效性。 展开更多
关键词 FKM AHP ewm TOPSIS 候车座椅 设计方案优选
在线阅读 下载PDF
基于AHP-EWM的大学生学习能力评价研究
4
作者 戴玮 《智能物联技术》 2026年第1期49-54,共6页
针对当下本科生学习能力影响因素问题,提出基于层次分析法和熵权法(Analytic Hierarchy Process and Entropy Weight Method,AHP-EWM)的学习能力评价模型。通过阅读文献和调研对影响学习能力的因素进行结构化梳理,从知识掌握、自主学习... 针对当下本科生学习能力影响因素问题,提出基于层次分析法和熵权法(Analytic Hierarchy Process and Entropy Weight Method,AHP-EWM)的学习能力评价模型。通过阅读文献和调研对影响学习能力的因素进行结构化梳理,从知识掌握、自主学习、实践应用及学习素养4个方面,构建影响学习能力的评价指标体系及组合权重数学模型。调研某学院本科生的实例权重值计算,确定知识整合能力、社会化应用及实践成果等二级指标是影响学生学习能力的最主要因素。 展开更多
关键词 学习能力评价 层次分析法(AHP) 熵权法(ewm)
在线阅读 下载PDF
基于AHP-EWM-KNN模型的煤矿顶板涌水危险性评价
5
作者 张慈增 张栋 《煤炭工程》 北大核心 2026年第3期198-205,共8页
为构建科学、严谨的煤层顶板涌水危险性评价体系,以嘎鲁图矿井2105工作面为背景,采用层次分析法-熵权法(AHP-EWM)优化涌水影响因素的综合权重,确定顶板涌水主控因素。以渗透系数、含水层厚度、孔隙水压力、温度及内聚力等指标为输入参数... 为构建科学、严谨的煤层顶板涌水危险性评价体系,以嘎鲁图矿井2105工作面为背景,采用层次分析法-熵权法(AHP-EWM)优化涌水影响因素的综合权重,确定顶板涌水主控因素。以渗透系数、含水层厚度、孔隙水压力、温度及内聚力等指标为输入参数,结合K近邻(KNN)机器学习算法,构建“数据输入-模型训练-现场验证-性能优化-预测应用”一体化的煤层顶板涌水危险性评价模型。结果表明:含水层厚度对嘎鲁图矿煤层顶板涌水的影响程度最大,渗透系数次之;通过对含水层厚度数据进行清洗与降噪处理,可显著提升模型预测精度,所构建的AHP-EWM-KNN融合模型精确率为0.9598,F_(1)-score为0.9569,验证了评价指标选取合理、预测方法可行。预测结果显示,2105工作面辅助运输巷距开切眼0~330 m及1620~2210 m区段为涌水高危险区域。该研究成果丰富了井下煤层顶板涌水危险性评价方法体系。 展开更多
关键词 顶板涌水 AHP-ewm 机器学习 模型预测 数据清洗 K近邻
在线阅读 下载PDF
Dynamics of Nonlinear Rossby Waves With the Derivative-Expansion Method
6
作者 TIAN Hongxiao ZHANG Ruigang LIU Quansheng 《应用数学和力学》 北大核心 2026年第3期313-328,共16页
Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,... Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,was mainly used to investigate Rossby waves under the combined effects of the generalizedβ-effect and the basic flow effect.The derivative expansion method has the advantage of capturing the multi-scalecharacteristics of wave processes simultaneously.In the case where the perturbation expansion is independentof secular terms,the nonlinear equations describing the amplitude evolution of nonlinear waves were derived,such as the Korteweg-de Vries equation,the Boussinesq equation and Zakharov-Kuznetsov equation.Both quali-tative and quantitative analyses indicate that the generalizedβ-effect is the key factor inducing the evolution ofRossby solitary waves. 展开更多
关键词 planetary Rossby waves generalized beta effect derivative-expansion method nonlinear equation
在线阅读 下载PDF
Influence of SiC Content on Foaming Stability,Cell Structure,and Compression Performance of SiC/Al-Based Composite Foam Prepared by Two-Step Foaming Method
7
作者 Huang Wenzhan Liu Tao +3 位作者 Chen Yao Wang Lucai Wu Jianguo You Xiaohong 《稀有金属材料与工程》 北大核心 2026年第4期890-898,共9页
SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminu... SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity. 展开更多
关键词 aluminum foam two-step foaming method foaming stability cell structure HARDNESS compressive strength
原文传递
基于EWM-TOPSIS模型的煤层顶板含水层富水性评价
8
作者 滕超 邱梅 《煤炭技术》 2026年第2期185-191,共7页
以长城一号井田为例,选取砂岩厚度、岩性结构指数、断层强度指数、断层交端点密度、褶皱轴线密度、砂岩埋深作为含水层富水性评价指标,将熵权法(EWM)与逼近理想解排序法(TOPSIS)相结合构建含水层富水性综合决策模型,对含水层富水性进行... 以长城一号井田为例,选取砂岩厚度、岩性结构指数、断层强度指数、断层交端点密度、褶皱轴线密度、砂岩埋深作为含水层富水性评价指标,将熵权法(EWM)与逼近理想解排序法(TOPSIS)相结合构建含水层富水性综合决策模型,对含水层富水性进行了分区评价,并利用钻孔单位涌水量、涌水点的位置分布数据对模型进行检验,验证了该模型评价效果的准确性,可为煤层顶板水害防治提供有益参考。 展开更多
关键词 煤层顶板 熵权法 逼近理想解排序法 富水性评价
原文传递
A New Inversion-free Iterative Method for Solving the Nonlinear Matrix Equation and Its Application in Optimal Control
9
作者 GAO Xiangyu XIE Weiwei ZHANG Lina 《应用数学》 北大核心 2026年第1期143-150,共8页
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ... In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method. 展开更多
关键词 Nonlinear matrix equation Maximal positive definite solution Inversion-free iterative method Optimal control
在线阅读 下载PDF
Broadband ground motion simulation and analysis of a near-fault 3D basin-mountain coupling site based on the hybrid method
10
作者 Liu Zhongxian Tang Kang +2 位作者 Li Chengcheng Yuan Xiaoming Zhang Hai 《Earthquake Engineering and Engineering Vibration》 2026年第1期87-110,共24页
This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SE... This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions. 展开更多
关键词 hybrid ground motion simulation method spectral element method three-dimensional stochastic finite fault method near-fault basin-mountain coupling effect basin effect nonlinear effect
在线阅读 下载PDF
Study on the effect of preparation method on denitration performance of Co-modified Ce/TiO_(2) catalyst
11
作者 YU Chao ZHANG Boya +2 位作者 SHEN Kai HAN Yuxuan ZHANG Yaping 《燃料化学学报(中英文)》 北大核心 2026年第3期79-91,共13页
This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s... This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s low-temperature denitrification activity.After identifying optimal preparation parameters via condition screening,multiple characterization techniques-including BET,XRD,XPS,H_(2)-TPR and in situ DRIFTS-were employed to deeply analyze the catalyst’s physicochemical properties and reaction mechanism.Results demonstrated that compared to the impregnation and co-precipitation methods,the Ce-Co_(0.025)/TiO_(2)-SG catalyst(prepared by the sol-gel method with a Co/Ti mass ratio of 0.025)exhibited significantly superior denitrification activity:NO conversion remained stably above 95%in the 225−350℃ temperature range,and it displayed high N_(2) selectivity.Characterization analysis revealed that abundant surface oxygen vacancies,a high proportion of Ce^(3+) species,and prominent acidic sites collectively contributed to enhancing its low-temperature denitrification performance.This work provides reference value for the development of highly efficient low-temperature denitrification catalysts. 展开更多
关键词 preparation method Co Ce/TiO_(2) low-temperature denitration NH_(3)-SCR
在线阅读 下载PDF
Establishment of a Determination Method for Fruit Texture in Chieh-qua Using Texture Analyzer
12
作者 Ying WANG Xuan DU Na LIU 《Agricultural Biotechnology》 2026年第1期54-59,共6页
[Objectives]This study was conducted to establish a quantitative assessment method for the textural quality of chieh-qua fruit.[Methods]Using two modes of a texture analyzer,namely TPA(texture profile analysis)and pun... [Objectives]This study was conducted to establish a quantitative assessment method for the textural quality of chieh-qua fruit.[Methods]Using two modes of a texture analyzer,namely TPA(texture profile analysis)and puncture,the index data of the fruit were obtained by setting different trigger forces,deformation levels,test speeds,as well as puncture speeds and puncture depths.The data included TPA hardness,adhesiveness,springiness,cohesiveness,gumminess,chewiness,resilience,as well as skin hardness,skin toughness,flesh hardness,fracturability,and compactness.[Results]Different deformation levels had a significant impact on all parameters.Hardness,adhesiveness,gumminess and chewiness showed a trend of first increasing and then decreasing with the deformation level increasing.When the deformation level was 30%,the adhesiveness,gumminess and chewiness reached their maximum values.When the deformation level was 50%,TPA hardness reached its maximum.When the compression speed was 3 mm/s,the measured values of TPA hardness,adhesiveness,chewiness,and resilience were at their maximums.The skin hardness varied significantly under different trigger forces.When the trigger force was 15 g,the skin hardness reached a maximum value of 944.63 g,and the skin toughness,flesh hardness,fracturability,and compactness also reach their maximum values respectively.When the puncture depth was 12 mm,the flesh hardness and skin toughness reached their maximums of 682.51 g and 1.82 mm,respectively.In the TPA mode,the flesh hardness of chieh-qua showed an extremely significant negative correlation with springiness,cohesiveness,and resilience(P<0.01).The fruit fracturability detected by puncture had an extremely significant positive correlation with compactness(P<0.01).[Conclusions]The evaluation method for measuring chieh-qua texture by combining TPA and the puncture mode could accurately and quantitatively reflect the differences in the flesh texture quality of chieh-qua.The optimal parameters for texture measurement of chieh-qua fruit were determined as a 15 g trigger force with 50%deformation and a 3 mm/s compression speed in TPA mode,and a 15 g trigger force with a 12 mm puncture depth in puncture mode.Puncture speed was found to have no significant effect on the texture indices of chieh-qua. 展开更多
关键词 CHIEH-QUA Texture analyzer Texture quality Determination method
在线阅读 下载PDF
A novel scaling method for the elastic ring supporting structure of an aero-engine rotor system: analytical and experimental investigations
13
作者 Lei LI Tianyue MA +4 位作者 Zhong LUO Dongwu GAO Xiangdong GE Hui MA Shibin WANG 《Applied Mathematics and Mechanics(English Edition)》 2026年第1期1-18,共18页
The testing of large structures is limited by high costs and long cycles, making scaling methods an attractive solution. However, the scaling process of elastic rings introduces complexities in multi-parameter geometr... The testing of large structures is limited by high costs and long cycles, making scaling methods an attractive solution. However, the scaling process of elastic rings introduces complexities in multi-parameter geometric distortions, leading to a diminution in the predictive accuracy of the distorted similitude. To address this challenge, this study formulates a novel set of scaling laws, tailored to account for the intricate geometric distortions associated with elastic rings. The proposed scaling laws are formulated based on the intrinsic deformation characteristics of elastic rings, rather than the traditional systemic governing equations. Numerical and experimental cases are conducted to assess the efficacy and precision of the proposed scaling laws, and the obtained results are compared with those achieved by traditional methods. The outcomes demonstrate that the scaling laws put forth by this study significantly enhance the predictive capabilities for deformations of elastic rings. 展开更多
关键词 rotor system AERO-ENGINE elastic ring scaling method supporting structure
在线阅读 下载PDF
Multiphysics Implicit Coupling Method for Fluid,Particles,and Large-Deformation Structures
14
作者 Xiangxiang Wang Hualong Xie +3 位作者 Yue Yu Min Li Yubin Wang Fei Xing 《Computer Modeling in Engineering & Sciences》 2026年第2期367-401,共35页
This study presents an implicit multiphysics coupling method integrating Computational Fluid Dynamics(CFD),the Multiphase Particle-in-Cell(MPPIC)model,and the Finite Element Method(FEM),implemented with OpenFOAM,Calcu... This study presents an implicit multiphysics coupling method integrating Computational Fluid Dynamics(CFD),the Multiphase Particle-in-Cell(MPPIC)model,and the Finite Element Method(FEM),implemented with OpenFOAM,CalculiX,and preCICE to simulate fluid-particle-structure interactions with large deformations.Mesh motion in the fluid field is handled using the radial basis function(RBF)method.The particle phase is modeled by MPPIC,where fluid-particle interaction is described through momentum exchange,and inter-particle collisions are characterized by collision stress.The structural field is solved by nonlinear FEM to capture large deformations induced by geometric nonlinearity.Coupling among fields is realized through a partitioned,parallel,and non-intrusive iterative strategy,ensuring stable transfer and convergence of interface forces and displacements.Notably,the influence of particles on the structure is not direct but mediated by the fluid,while structural motion directly affects particle dynamics.The results demonstrate that the proposed approach effectively captures multiphysics interaction processes and provides a valuable reference for numerical modeling of coupled fluid-particle-structure systems. 展开更多
关键词 Fluid-particle-structure interaction large deformation partitioned method non-intrusive coupling
在线阅读 下载PDF
A Cost-Effective Approach to Precisely Estimate Singlet-Triplet Energy Gaps in MR-TADF Molecules:Combining Delta Self-Consistent Field and Time-Dependent Density Functional Theory Methods
15
作者 Qian Jina Dong Wang 《Chinese Journal of Chemical Physics》 2026年第1期41-50,I0021-I0032,I0042,共23页
As a novel class of purely organic fluores-cent materials,multiple resonance thermal-ly activated delayed fluorescence(MR-TADF)compounds hold significant promise for next-generation display technologies.The efficiency... As a novel class of purely organic fluores-cent materials,multiple resonance thermal-ly activated delayed fluorescence(MR-TADF)compounds hold significant promise for next-generation display technologies.The efficiency of exciton utilization and the overall performance of organic light-emit-ting devices are closely linked to the singlet-triplet energy gap(ΔE_(ST))of MR-TADF emitters.Identifying an economic and accu-rate theoretical approach to predictΔE_(ST)would be beneficial for high-throughput screening and facilitate the inverse design of MR-TADF molecules.In this study,we evaluated the S_(1)state energy(E(S_(1))),T_(1)state ener-gy(E(T_(1))),andΔE_(ST)using three different physical interpretations:adiabatic excitation ener-gy,vertical absorption energy,and vertical emission energy.We employed the time-depen-dent density functional theory(TDDFT)and delta self-consistent field(ΔSCF)methods to calculate E(S_(1)),E(T_(1)),andΔE_(ST)for 20 MR-TADF molecules reported in the literature.We compared these calculated values with experimental data obtained from fluorescence spec-troscopy at room-temperature(or 77 K)and phosphorescence spectroscopy conducted at 77 K.Our findings indicate that the vertical absorption energy at the S0 state minimum,deter-mined by theΔSCF method,accurately predicts the S_(1)state energy.Similarly,the vertical absorption energy at the S0 state minimum,calculated using the TDDFT method,effectively predicts the T_(1)state energy.TheΔE_(ST)derived from the difference between these two excita-tion energies exhibited the smallest mean absolute error of only 0.039 eV compared to the ex-perimental values.This combination represents the most accurate and cost-effective method reported to date for predicting theΔE_(ST)of MR-TADF molecules,and can be integrated into AI-driven inverse design workflows for new emitters. 展开更多
关键词 Organic light-emitting diode Multiple resonance thermally activated delayed fluorescence emitter Single-triplet energy gap Delta self-consistent field method Time-de-pendent density functional theory method
在线阅读 下载PDF
Synchronization Stability Analysis of Multi-VSC Grid-connected System via Multi-scale Method
16
作者 Meng Huang Yangjian Ling +3 位作者 Han Yan Xikun Fu Xiaoming Zha Herbert Ho-Ching Iu 《CSEE Journal of Power and Energy Systems》 2026年第1期282-293,共12页
In a multiple voltage source converter(VSC)system,the nonlinear characteristics of phase-locked loops(PLLs)and their interactions have a significant influence on the synchronization stability of converters.In this pap... In a multiple voltage source converter(VSC)system,the nonlinear characteristics of phase-locked loops(PLLs)and their interactions have a significant influence on the synchronization stability of converters.In this paper,these influences are investigated from the perspective of the time domain.First,a novel time-domain model of the multi-VSC system is obtained by using a multi-scale method.On this basis,a stability criterion is proposed to assess the synchronization stability of the system.Then,the accuracy of the time-domain model and its stability criterion in various conditions are discussed.Moreover,the negative impact of the interaction on the system is quantified.Finally,the above theoretical analysis is also verified in the controller hardware-in-the-loop(CHIL)experiments. 展开更多
关键词 Multi-scale method multi-VSC phase-locked loops synchronization stability time-domain model
原文传递
Healthcare professionals’perspectives on disclosure of diagnosis and related issues in childhood cancer:A mixed methods systematic review
17
作者 Run Xie Xiaoyan Huang +4 位作者 Yiran Du Ying Gu Qiongfang Kang Hongsheng Wang Daqian Zhu 《International Journal of Nursing Sciences》 2026年第1期96-104,I0006,共10页
Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of... Objectives This review aimed to systematically synthesize the available research on the disclosure of diagnosis and related issues in childhood cancer from the perspectives of healthcare professionals,with the goal of informing the optimization of disclosure processes and meeting the communication needs of affected families.Methods In accordance with the Joanna Briggs Institute(JBI)methodology for mixed methods systematic reviews,the convergent segregated approach was used in this review.Articles were retrieved from 11 databases,including PubMed,Web of Science,CINAHL,CENTRAL,Embase,Ovid/Medline,PsycINFO,PsycArticles,Scopus,ERIC,and China National Knowledge Infrastructure(CNKI).The quality of the selected articles was assessed using the Mixed Method Appraisal Tool(MMAT).The review protocol was registered on PROSPERO(CRD42024542746).Results A total of 21 studies from 10 countries were included.Their methodological quality was generally medium to high,with MMAT scores ranging from 60%to 100%.The synthesis yielded three core themes:1)the spectrum of professional and societal attitudes toward disclosure;2)the dynamic practices of navigating disclosure amid uncertainty,including timing and environment,stakeholders,and content of disclosure;and 3)factors influencing disclosure,including children’s,parental,healthcare professionals’,and socio-cultural factors.Conclusions This review synthesized the perspectives and experiences of healthcare professionals regarding disclosure in childhood cancer,highlighting the complexity and multidimensional nature of this process in clinical practice.Future research should further investigate the experiences and needs of children and their parents,explore cultural variations in disclosure practices,develop context-appropriate assessment tools,and construct multidimensional intervention strategies to enhance the humanistic care and professional effectiveness of the disclosure process. 展开更多
关键词 Communication CANCER DISCLOSURE Healthcare professionals Mixed methods PEDIATRIC Systematic review
暂未订购
On the Use of the Nelder-Mead Simplex Method in Control Design and Systems Theory
18
作者 Laura Menini Corrado Possieri Antonio Tornambe 《IEEE/CAA Journal of Automatica Sinica》 2026年第1期186-204,共19页
The Nelder-Mead simplex method is a well-known algorithm enabling the minimization of functions that are not available in closed-form and that need not be differentiable or convex.Furthermore,it is particularly parsim... The Nelder-Mead simplex method is a well-known algorithm enabling the minimization of functions that are not available in closed-form and that need not be differentiable or convex.Furthermore,it is particularly parsimonious on the number of function evaluations,thus making it preferable to convex optimization paradigms in the case,common when dealing with control design problems,that the objective function of the optimization problem is non-differentiable,non-convex,and its closed-form is not available or difficult to be computed analytically.The main goal of this paper is to show how the joint use of the Nelder-Mead simplex method and the Morrison algorithm can be successfully used to solve relevant and challenging control problems that cannot be easily solved using analytic methods.In particular,it is shown how the problems of strong stabilization,static output feedback stabilization,and design of robust controllers having fixed structure can be framed as optimization problems,which,in turn,can be efficiently solved by coupling the two above mentioned algorithms.The performance of this procedure is compared with state-of-the-art techniques on dozens of static output feedback benchmark case studies,and its effectiveness is demonstrated by several examples. 展开更多
关键词 Optimization method robust controller static output feedback strong stabilizability
在线阅读 下载PDF
Investigation of equivalent strength parameters of soil-rock mixture using numerical manifold method
19
作者 Junfeng Li Yongtao Yang +2 位作者 Yang Xia Hong Zheng Shuilin Wang 《Journal of Rock Mechanics and Geotechnical Engineering》 2026年第1期637-650,共14页
As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalen... As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e). 展开更多
关键词 Soil-rock mixtures Equivalent strength parameters Numerical manifold method
在线阅读 下载PDF
Subtitle Translation Methods of The Good Wife From Functional Equivalence Perspective
20
作者 WANG Ya-kun BAO De-wang 《Journal of Literature and Art Studies》 2026年第1期26-30,共5页
The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to... The Good Wife is an American TV series that focuses on women’s independence,politics,and law.The drama has been remade in China,Japan,and South Korea.This research aims to use Nida’s Functional Equivalence Theory to analyze the methods of its English-to-Chinese subtitle translation by considering social,cultural,and historic backgrounds between China and America.After data collection and case analysis,the study found that:(1)Five major translation methods are adopted in the subtitle translation of The Good Wife.They are free translation,variation,literal translation,addition,and omission.Among them,free translation is the most frequently used,while omission is used least.(2)The subtitle translation of films and TV series is limited by time and space restrictions,social-cultural differences,and other factors.When translating,translators should try to use humorous words,euphemism,intonation,and other ways,and combine different methods such as literal translation,free translation,variation,addition,omission,and other methods to seek equivalence both in the meaning and function of subtitles under the guidance of Functional Equivalence Theory. 展开更多
关键词 subtitle translation Functional Equivalence Theory The Good Wife translation methods
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部