Two types of low carbon MgO - C refractories with 6% graphite were prepared using microporous magnesiarich spinel （5 - 3 and 3 - 1 mm ） and fused magnesia （5 - 3 and 3 - 1 mm ） as coarse aggregates, respectively, ...Two types of low carbon MgO - C refractories with 6% graphite were prepared using microporous magnesiarich spinel （5 - 3 and 3 - 1 mm ） and fused magnesia （5 - 3 and 3 - 1 mm ） as coarse aggregates, respectively, fused magnesia （ ≤1 mm） as fine aggregate, magnesia powder （≤ 0. 088 mm ） , flake graphite powder （ ≤0. 088 mm）, metal Al powder （ 〈0. 074 mm） as matrix, and phenol resin as binder. After curing at 220 ℃ and coke-embedded firing at 1 500 ℃ , the apparent porosity, cold crushing strength, cold modulus of rupture, permanent linear change on heating, thermal shock resistance and slag resistance of the specimens were studied comparatively. The results indicate that： （ 1 ） after curing at 220 ℃ and coke-embedded firing at 1 500 ℃, the specimen with microporous magnesia-rich spinel replacing fused magnesia has lower bulk density and higher apparent porosity than the common low car- bon MgO - C specimen. After curing at 220 ℃, the specimen with microporous aggregate has lower strength than common low carbon MgO - C specimen, but after coke-embedded firing at 1 500℃, it has higher strength and lower permanent linear change on heating; （2） low carbon MgO - C specimen using microporous magnesia-rich spinel to replace fused magnesia aggregate has better thermal shock resistance but worse slag resistance.展开更多
The influence of MgO content in slag on wetting and corrosion behavior between slag and MgO–C refractory was investigated.It can be known from the high-temperature wetting experiment that as the MgO content in the sl...The influence of MgO content in slag on wetting and corrosion behavior between slag and MgO–C refractory was investigated.It can be known from the high-temperature wetting experiment that as the MgO content in the slag increases,the final contact angle between the slag and the MgO–C refractory gradually increases and the penetration depth of the slag into the refractory gradually decreases from 60.54μm(when the MgO content is 8%)to 28.11μm(when the MgO content is 12%).The CaO and SiO_(2)in the slag penetrate into the MgO–C refractory along the pores or surface cracks formed by carbon oxidation and react with MgO to generate a large amount of low-melting compound CaO–MgO–SiO_(2),which accelerates the corrosion of the refractory.As the MgO content in slag increases,the viscosity of the slag increases and the fluidity becomes worse,so that the mass transfer and diffusion of molecules or ions in the slag are weakened.In addition,the increase in MgO reduces the activity of FeO in the slag,which inhibits the interfacial chemical reaction,thereby weakening the wetting effect caused by the reaction.展开更多
In order to widen the application of microcrystalline magnesite,the thermal decomposition behavior of the microcrystalline magnesite in Sichuan and Tibet area was firstly studied by thermogravimetric analysis. Then th...In order to widen the application of microcrystalline magnesite,the thermal decomposition behavior of the microcrystalline magnesite in Sichuan and Tibet area was firstly studied by thermogravimetric analysis. Then the effects of the calcination temperature,calcination time and particle size on the preparation of active Mg O from microcrystalline magnesite were studied by orthogonal experimental design. At last,high purity sintered magnesia was prepared by two-step calcination,meanwhile the effects of the light burning temperature,particle size of the light-burned Mg O powder,molding pressure and the hydration rate of light-burned Mg O powder on the properties of high purity sintered magnesia were studied.The results show that:（ 1） the calcination temperature has the greatest influence on the activity of light-burned MgO,followed by the holding time and the particle size;the optimal process of light burning for preparing active MgO is the microcrystalline magnesite with particle size of 1-0. 5 mm heat-treating at 700 ℃ for 2 h; under these conditions,the microcrystalline magnesite decomposes completely; the average grain size of the obtained product is about 21. 4 nm,and its activity of CAA is20. 16 s;（ 2） the effect of the light burning temperature on the density of high purity sintered magnesia is not obvious; the fineness of the light burning Mg O powder and molding pressure help to increase the density of sintered magnesia; the lower the hydration rate of the lightburned Mg O, the higher the density of the sintered magnesia; the high-purity sintered magnesite withw（ MgO） ≥98% and bulk density≥3. 40 g/cm;can be prepared by the two-step calcination; the grains are fine with size of 30-200 μm and the impurity at grain boundaries is little.展开更多
文摘Two types of low carbon MgO - C refractories with 6% graphite were prepared using microporous magnesiarich spinel （5 - 3 and 3 - 1 mm ） and fused magnesia （5 - 3 and 3 - 1 mm ） as coarse aggregates, respectively, fused magnesia （ ≤1 mm） as fine aggregate, magnesia powder （≤ 0. 088 mm ） , flake graphite powder （ ≤0. 088 mm）, metal Al powder （ 〈0. 074 mm） as matrix, and phenol resin as binder. After curing at 220 ℃ and coke-embedded firing at 1 500 ℃ , the apparent porosity, cold crushing strength, cold modulus of rupture, permanent linear change on heating, thermal shock resistance and slag resistance of the specimens were studied comparatively. The results indicate that： （ 1 ） after curing at 220 ℃ and coke-embedded firing at 1 500 ℃, the specimen with microporous magnesia-rich spinel replacing fused magnesia has lower bulk density and higher apparent porosity than the common low car- bon MgO - C specimen. After curing at 220 ℃, the specimen with microporous aggregate has lower strength than common low carbon MgO - C specimen, but after coke-embedded firing at 1 500℃, it has higher strength and lower permanent linear change on heating; （2） low carbon MgO - C specimen using microporous magnesia-rich spinel to replace fused magnesia aggregate has better thermal shock resistance but worse slag resistance.
基金This work was financially supported by the National Natural Science Foundation of China(Grant Nos.51874171 and 51974154)supported by University of Science and Technology Liaoning talents program(601009840-09).
文摘The influence of MgO content in slag on wetting and corrosion behavior between slag and MgO–C refractory was investigated.It can be known from the high-temperature wetting experiment that as the MgO content in the slag increases,the final contact angle between the slag and the MgO–C refractory gradually increases and the penetration depth of the slag into the refractory gradually decreases from 60.54μm(when the MgO content is 8%)to 28.11μm(when the MgO content is 12%).The CaO and SiO_(2)in the slag penetrate into the MgO–C refractory along the pores or surface cracks formed by carbon oxidation and react with MgO to generate a large amount of low-melting compound CaO–MgO–SiO_(2),which accelerates the corrosion of the refractory.As the MgO content in slag increases,the viscosity of the slag increases and the fluidity becomes worse,so that the mass transfer and diffusion of molecules or ions in the slag are weakened.In addition,the increase in MgO reduces the activity of FeO in the slag,which inhibits the interfacial chemical reaction,thereby weakening the wetting effect caused by the reaction.
文摘In order to widen the application of microcrystalline magnesite,the thermal decomposition behavior of the microcrystalline magnesite in Sichuan and Tibet area was firstly studied by thermogravimetric analysis. Then the effects of the calcination temperature,calcination time and particle size on the preparation of active Mg O from microcrystalline magnesite were studied by orthogonal experimental design. At last,high purity sintered magnesia was prepared by two-step calcination,meanwhile the effects of the light burning temperature,particle size of the light-burned Mg O powder,molding pressure and the hydration rate of light-burned Mg O powder on the properties of high purity sintered magnesia were studied.The results show that:（ 1） the calcination temperature has the greatest influence on the activity of light-burned MgO,followed by the holding time and the particle size;the optimal process of light burning for preparing active MgO is the microcrystalline magnesite with particle size of 1-0. 5 mm heat-treating at 700 ℃ for 2 h; under these conditions,the microcrystalline magnesite decomposes completely; the average grain size of the obtained product is about 21. 4 nm,and its activity of CAA is20. 16 s;（ 2） the effect of the light burning temperature on the density of high purity sintered magnesia is not obvious; the fineness of the light burning Mg O powder and molding pressure help to increase the density of sintered magnesia; the lower the hydration rate of the lightburned Mg O, the higher the density of the sintered magnesia; the high-purity sintered magnesite withw（ MgO） ≥98% and bulk density≥3. 40 g/cm;can be prepared by the two-step calcination; the grains are fine with size of 30-200 μm and the impurity at grain boundaries is little.
