An ultrafine-grained（UFG） Mg-13Zn-1.55 Y alloy（ZW132） with a high volume fraction（7.4%） of icosahedral phase（I-phase, Mg;Zn;Y） particles was prepared by applying high-ratio differential speed rolling（HRDSR） ...An ultrafine-grained（UFG） Mg-13Zn-1.55 Y alloy（ZW132） with a high volume fraction（7.4%） of icosahedral phase（I-phase, Mg;Zn;Y） particles was prepared by applying high-ratio differential speed rolling（HRDSR） on the cast microstructure following homogenization. The alloy exhibited excellent superplasticity at low temperatures(tensile elongations of 455% and 1021% 473 K-10;s;and 523 K-10;s;,respectively). Compared with UFG Mg-9.25Zn-1.66 Y alloy（ZW92） with a lower volume fraction of I-phase particles（4.1%）, which was prepared using the same processing routes, the UFG ZW132 alloy exhibited a higher thermal stability of grain size. Rapid grain coarsening, however, occurred at temperatures beyond523 K, leading to a loss of superplasticity. The high-temperature deformation behavior of the HRDSRprocessed ZW132 alloy could be well described assuming that the mechanisms of grain boundary sliding and dislocation climb creep competed with each other and considering that the grain-size was largely increased by accelerated grain growth at the temperatures beyond 523 K.展开更多
Two kinds of contact problems, i.e., the frictional contact problem and the adhesive contact problem, in three-dimensional （3D） icosahedral quasicrystals are dis- cussed by a complex variable function method. For th...Two kinds of contact problems, i.e., the frictional contact problem and the adhesive contact problem, in three-dimensional （3D） icosahedral quasicrystals are dis- cussed by a complex variable function method. For the frictional contact problem, the contact stress exhibits power singularities at the edge of the contact zone. For the adhe- sive contact problem, the contact stress exhibits oscillatory singularities at the edge of the contact zone. The numerical examples show that for the two kinds of contact problems, the contact stress exhibits singularities, and reaches the maximum value at the edge of the contact zone. The phonon-phason coupling constant has a significant effect on the contact stress intensity, while has little impact on the contact stress distribution regu- lation. The results are consistent with those of the classical elastic materials when the phonon-phason coupling constant is 0. For the adhesive contact problem, the indentation force has positive correlation with the contact displacement, but the phonon-phason cou- pling constant impact is barely perceptible. The validity of the conclusions is verified.展开更多
The dynamic response of an icosahedral Al-Pd Mn quasicrystal with a Griffith crack to impact loading is investigated in this paper. The elastohydrodynamic model for the wave propagation and diffusion together with the...The dynamic response of an icosahedral Al-Pd Mn quasicrystal with a Griffith crack to impact loading is investigated in this paper. The elastohydrodynamic model for the wave propagation and diffusion together with their interaction is adopted. Numerical results of stress, displacement and dynamic stress intensity factors are obtained by using the finite difference method. The effects of wave propagation, diffusion and phonon-phason coupling on the quasicrystal in the dynamic process are discussed in detail, where the phason dynamics is explored particularly.展开更多
Based on the displacement potential functions, the elastic analysis of a mode Ⅱ crack in an icosahedral quasicrystal is performed by using the Fourier transform and dual integral equation theory. By the solution, the...Based on the displacement potential functions, the elastic analysis of a mode Ⅱ crack in an icosahedral quasicrystal is performed by using the Fourier transform and dual integral equation theory. By the solution, the analytic expressions for the displacement field and stress field are obtained. The asymptotic behaviours of the phonon and phason stress fields around the crack tip indicate that the stresses near the crack tip exhibit a square root singularity. The most important physical quantities of fracture theory, crack stress intensity factor and energy release rate, are evaluated in an explicit version.展开更多
An electro-elastic analysis is performed on an icosahedral quasicrystal with piezoelectric effects containing a straight dislocation. The closed-form expressions for the elastic and electric fields are obtained using ...An electro-elastic analysis is performed on an icosahedral quasicrystal with piezoelectric effects containing a straight dislocation. The closed-form expressions for the elastic and electric fields are obtained using the extended Stroh formalism. The effects of piezoelectric constant on the phonon displacement, phason displacement, and electric potential are discussed in detail.展开更多
The microstructure formation and mechanical property involving icosahedral quasicrystal （I-phase） in the Y-rich Mg-Zn-Y alloy have been studied. The equilibrium formation of I-phase from the Y-rich Mg-Zn-Y melt is ...The microstructure formation and mechanical property involving icosahedral quasicrystal （I-phase） in the Y-rich Mg-Zn-Y alloy have been studied. The equilibrium formation of I-phase from the Y-rich Mg-Zn-Y melt is through a peritectic reaction between the Y-rich melt and the primary W-phase, which is discussed in detail. The independent nucleation and coupling growth mechanism between the W-phase and the I-phase, from the melt, are revealed, which is significant for understanding the peritectic reaction process involving icosahedral quasicrystal in the Mg-Zn-Y alloy. The mechanism of the quasicrystal phase strengthened magnesium alloys is also discussed here.展开更多
The complex variable method for solving the two-dimensional thermal stress problem of icosahedral quasicrystals is stated. The closed-form solutions for icosahedral quasicrystals containing an elliptical hole subjecte...The complex variable method for solving the two-dimensional thermal stress problem of icosahedral quasicrystals is stated. The closed-form solutions for icosahedral quasicrystals containing an elliptical hole subjected to a remote uniform heat flow are obtained. When the hole degenerates into a crack, the explicit solutions for the stress intensity factors is presented.展开更多
The generalized 2D problem of icosahedral quasicrystals containing an elliptic hole is considered by using the ex- tended Stroh formalism. The closed-form solutions for the displacements and stresses are obtained unde...The generalized 2D problem of icosahedral quasicrystals containing an elliptic hole is considered by using the ex- tended Stroh formalism. The closed-form solutions for the displacements and stresses are obtained under general loading conditions. The solution of the Griffith crack problem as a special case of the results is also observed. The stress intensity factor and strain energy release rate are given. The effect of the phonon-phason coupling elastic constant on the mechanical behavior is also discussed.展开更多
In this paper, the microstructure evolution of the rapidly solidified (RS) Mg61.7Zn34Gd4.3 (at%, atomic ratio) alloy at high temperatures was investigated. The hardness and elastic modulus of the main precipitated pha...In this paper, the microstructure evolution of the rapidly solidified (RS) Mg61.7Zn34Gd4.3 (at%, atomic ratio) alloy at high temperatures was investigated. The hardness and elastic modulus of the main precipitated phases were also analyzed and compared with those of the α-Mg matrix on the basis of nanoindentation tests. The results show that the RS alloy consists of either a petal-like icosahedral quasicrystal (IQC) phase (~20 μm) and block-shaped H1 phase (~15 μm) or IQC particles with an average grain size of ~107 nm as well as a small proportion of amorphous phase, which mainly depends on the holding time at the liquid temperature and the thickness of the ribbons. The IQC phase gradually transforms at 400?C to a short-rod-shaped μ-phase (Mg28.6Zn63.8Gd7.7) with a hexagonal structure. The hardness of the IQC phase is higher than that of H1 phase, and both phases exhibit a higher hardness than the α-Mg matrix and the μ-phase. The elasticity of the H1 phase is superior to that of the α-Mg matrix. The IQC phase possesses a higher elastic modulus than H1 phase. The easily formed H1 phase exhibits the poorest plastic deformation capacity among these phases but a higher elastic modulus than the α-Mg matrix.展开更多
Aerosol optical properties are simulated using the Spectral Radiation Transport Model I~）r Aerosol Species （SPRINTARS） coupled with the Non-hydrostatic ICosahedral Atmospheric Model （NICAM）. The 3-year global mea...Aerosol optical properties are simulated using the Spectral Radiation Transport Model I~）r Aerosol Species （SPRINTARS） coupled with the Non-hydrostatic ICosahedral Atmospheric Model （NICAM）. The 3-year global mean all-sky aerosol optical thickness （AOT） at 550 nm, theAngstr/Sm Exponent （AE） based on AOTs at 440 and 870 nm, and the single scattering albedo （SSA） at 550 nm are estimated at 0.123, 0.657 and 0.944, respectively. For each aerosol species, the mean AOT is within the range of the AeroCom models. Both the modeled all-sky and clear-sky results are compared with observations from the Moderate Resolution Imaging Spectroradiometer （MODIS） and the Aerosol Robotic Network （AERONET）. The simulated spatiotemporal distributions of all-sky AOTs can generally reproduce the MODIS retrievals, and the correlation and model skill can be slightly improved using the clear-sky results over most land regions. The differences between clear-sky and all-sky AOTs are larger over polluted regions. Compared with observations from AERONET, the modeled and observed all-sky AOTs and AEs are generally in reasonable agreement, whereas the SSA variation is not well captured. Although the spatiotemporal distributions of all-sky and clear-sky results are similar, the clear-sky results are generally better correlated with the observations. The clear-sky AOT and SSA are generally lower than the all-sky results, especially in those regions where the aerosol chemical composition is contributed to mostly by sulfate aerosol. The modeled clear-sky AE is larger than the all-sky AE over those regions dominated by hydrophilic aerosol, while the＇opposite is found over regions dominated by hydrophobic aerosol.展开更多
Icosahedral quasicrystals are the most important and thermodynamically stable in all about 200 kinds of quasicrystals currently observed. Beyond the scope of classical elasticity, apart from a phonon displacement fiel...Icosahedral quasicrystals are the most important and thermodynamically stable in all about 200 kinds of quasicrystals currently observed. Beyond the scope of classical elasticity, apart from a phonon displacement field, there is a phason displacement field in the elasticity of the quasicrystal, which induces an important effect on the mechanical properties of the material and makes an analytical solution difficult to obtain. In this paper, a finite element algorithm for the static elasticity of icosahedral quasicrystals is developed by transforming the elastic boundary value problem of the icosahedral quasicrystals into an equivalent variational problem. Analytical and numerical solutions for an icosahedral A1-Pd-Mn quasicrystal cuboid subjected to a uniaxial tension with different phonon-phason coupling parameters are given to verify the validity of the numerical approach. A comparison between the analytical and numerical solutions of the specimen demonstrates the accuracy and efficiency of the present algorithm. Finally, in order to reveal the fracture behavior of the icosahedral A1-Pd-Mn quasicrystal, a cracked specimen with a finite size of matter is investigated, both with and without phonon-phason coupling. Meanwhile, the geometry factors are calculated, including the stress intensity factor and the crack opening displacement for the finite-size specimen. Computational results reveal the importance of pbonon-phason coupling effect on the icosahedral A1-Pd-Mn quasicrystal. Furthermore, the finite element procedure can be used to solve more complicated boundary value problems.展开更多
Mg70.8Zn28Nd1.2（mole fraction） alloy containing icosahedral quasicrystal phase （I-phase） was prepared under conventional metal casting conditions. The microstructure, phase constitution and phase structure of the ...Mg70.8Zn28Nd1.2（mole fraction） alloy containing icosahedral quasicrystal phase （I-phase） was prepared under conventional metal casting conditions. The microstructure, phase constitution and phase structure of the alloy were investigated by means of scanning electron microscopy （SEM）, X-ray diffraction （XRD）, energy dispersive spectrometer （EDS） and transmission electron microscopy （TEM）. The resuits showed that the spherical phase in Mg70.8Zn28Nd1.2 alloy was a simple icosahedral quasicrystal with stoichiometric composition of Mg40Zn55Nd5 and quasi-lattice of 0.525 nm. In this research, the as-cast microstructure of Mg70.8Zn28Nd1.2 alloy mainly consisted of Mg40Zn55Nd5 icosahedral quasicrystal phase and Mg7Zn3 columnar crystal matrix. In the growing process of Mg40Zn55Nd5 icosahedral quasicrystal phase, the growth morphology mainly depended on interface energy, adsorption effect of Nd and cooling rate.展开更多
An Eulerian flux-form advection scheme, called the Two-step Shape-Preserving Advection Scheme （TSPAS）, was generalized and implemented on a spherical icosahedral hexagonal grid （also referred to as a geodesic grid...An Eulerian flux-form advection scheme, called the Two-step Shape-Preserving Advection Scheme （TSPAS）, was generalized and implemented on a spherical icosahedral hexagonal grid （also referred to as a geodesic grid） to solve the transport equation. The C grid discretization was used for the spatial discretization. To implement TSPAS on an unstructured grid, the original finite-difference scheme was further generalized. The two-step integration utilizes a combination of two separate schemes （a low-order monotone scheme and a high-order scheme that typically cannot ensure monotonicity） to calculate the fluxes at the cell walls （one scheme corresponds to one cell wall）. The choice between these two schemes for each edge depends on a pre-updated scalar value using slightly increased fluxes. After the determination of an appropriate scheme, the final integration at a target cell is achieved by summing the fluxes that are computed by the different schemes. The conservative and shape-preserving properties of the generalized scheme are demonstrated. Numerical experiments are conducted at several horizontal resolutions. TSPAS is compared with the Flux Corrected Transport （FCT） approach to demonstrate the differences between the two methods, and several transport tests are performed to examine the accuracy, efficiency and robustness of the two schemes.展开更多
The microstructure, chemical composition and morphology evolution of icosahedral quasicrystalline phase of Mg67.4Zn28.9Y3.7 ternary alloy were investigated in detail at different pouring temperatures by X-ray diffract...The microstructure, chemical composition and morphology evolution of icosahedral quasicrystalline phase of Mg67.4Zn28.9Y3.7 ternary alloy were investigated in detail at different pouring temperatures by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and energy-dispersive spectrum （EDS）. Low interracial energy favors the formation of l-phase. The experimental results show that the primary l-phase reveals petal-shaped with five and six branches, where each branch has facetted growth morphology with the size ranging from 50 to 100μm. As the temperature decreases, the polygon-shaped l-phase forms, attributed to the decomposition of branch of petal-shaped l-phase, and then it grows bigger and some of the fine polygons join together to form large polygons. Besides these, （α-Mg＋l-phase） eutectic structures disappear and the relative amount of Mg7Zn3 phase increases as the pouring temperature decreases. The chemical composition and morphology evolution of l-phase were also discussed.展开更多
Three-dimensional morphology and formation process of icosahedral quasicrystal phase have been investigated in a melt-spun AI-18Mn alloy （in wt%）. Three distinct layers corresponding to varying temperature gradient ...Three-dimensional morphology and formation process of icosahedral quasicrystal phase have been investigated in a melt-spun AI-18Mn alloy （in wt%）. Three distinct layers corresponding to varying temperature gradient have been observed on the cross section of the ribbons. 3D morphologies of cellular and dendritic icosahedral phase have been obtained through electro-etching. A model has been proposed to describe the formation process of the icosahedral phase and a-A1 during the rapid solidification. The icosahedral phases are primarily precipitated from the melt into fine cellular and dendritic particles, and subsequently engulfed by the a-A1 which propagates in a planar morphology.展开更多
The quasicrystal phase is beneficial to increasing the strength of magnesium alloys.However,its complicated structure and unclear phase relations impede the design of alloys with good mechanical properties.In this pap...The quasicrystal phase is beneficial to increasing the strength of magnesium alloys.However,its complicated structure and unclear phase relations impede the design of alloys with good mechanical properties.In this paper,the Mg_(40)Zn_(55)Nd_(5) icosahedral quasicrystal(I-phase)structure is discovered in an as-cast Mg-58Zn-4Nd alloy by atomic resolution high-angle annular dark-field scanning transmission electron microscopy(HAADF-STEM).A cloud-like morphology is observed with Mg_(41.6)Zn_(55.0)Nd_(3.4) composition.The selected area electronic diffrac-tion(SAED)analysis shows that the icosahedral quasicrystal structure has 5-fold,4-fold,3-fold,and 2-fold symmetry zone axes.The thermo-dynamic stability of the icosahedral quasicrystal is investigated by differential scanning calorimetry(DSC)in the annealed alloys.When an-nealed above 300℃,the Mg_(40)Zn_(55)Nd_(5) quasicrystal is found to decompose into a stable ternary phase Mg_(35)Zn_(60)Nd_(5),a binary phase MgZn,andα-Mg,suggesting that the quasicrystal is a metastable phase in the Mg-Zn-Nd system.展开更多
Atomically precise gold cluster catalysts have emerged as a new frontier in catalysis science,owing to their unexpected catalytic properties.In this work,we explore the evolution of the catalytic activity of clusters ...Atomically precise gold cluster catalysts have emerged as a new frontier in catalysis science,owing to their unexpected catalytic properties.In this work,we explore the evolution of the catalytic activity of clusters formed by the structural fusion of icosahedral Au13 units,namely Au25(SR)18,Au38(SR)24,and Au25(PPh3)10(SC2H4Ph)5Cl2,in the oxidation of pyrrolidine toγ-butyrolactam.We demonstrate that the structural fusion of icosahedral Au13 units,forming vertex-fused(vf),face-fused(ff),and body-fused(bf)clusters,can induce a decrease in the catalytic activity in the following order:Aubf>Auff>Auvf.The structural fusion of icosahedral Au13 units in the clusters does not distinguish the adsorption modes of pyrrolidine over the three clusters from each other,but modulates the chemical adsorption capacity and electronic properties of the three clusters,which is likely to be the key reason for the observed changes in catalytic reactivity.Our results are expected to be extendable to study and design atomically defined catalysts with elaborate structural patterns,in order to produce desired products.展开更多
The most pronounced β-relaxation was found in the Y-based binary metallic glasses（MGs）. The correlation betweenβ-relaxation and local atomic structure was studied. The dynamic mechanical measurements were performe...The most pronounced β-relaxation was found in the Y-based binary metallic glasses（MGs）. The correlation betweenβ-relaxation and local atomic structure was studied. The dynamic mechanical measurements were performed for three chosen binary systems： Zr-, Ti-, and Y-based MGs. The experimental results show that, in each system,the larger negative enthalpy of mixing（？Hm） between the component elements makes β-relaxation become more pronounced. The less negative value of ？Hm facilitates the formation of icosahedral clusters, which have a pinning effect on the excitation of β-relaxations and correspondingly make the β-relaxation become less pronounced. These chemical effects on β-relaxations can only be compared in the same MG system, and it is not suitable for the comparison between different systems due to the different features of the major metallic elements.展开更多
Three-dimensional(3 D)reconstruction of icosahedral viruses has played a crucial role in the development of cryoelectron microscopy single-particle reconstruction,with many cryo-electron microscopy techniques first es...Three-dimensional(3 D)reconstruction of icosahedral viruses has played a crucial role in the development of cryoelectron microscopy single-particle reconstruction,with many cryo-electron microscopy techniques first established for structural studies of icosahedral viruses,owing to their high symmetry and large mass.This review summarizes the computational methods for icosahedral and symmetry-mismatch reconstruction of viruses,as well as the likely challenges and bottlenecks in virus reconstruction,such as symmetry mismatch reconstruction,contrast transformation function(CTF)correction,and particle distortion.展开更多
The unique hot carrier-driven direct plasmonic photocatalysis of coinage metal nanomaterials(NMs)via energetic localized surface plasmon resonance(LSPR)in visible-light region has been explored in recent years.However...The unique hot carrier-driven direct plasmonic photocatalysis of coinage metal nanomaterials(NMs)via energetic localized surface plasmon resonance(LSPR)in visible-light region has been explored in recent years.However,the low photoinduced electron transfer efficiency and insufficient separation of electronhole pairs would severely preclude their widespread practical applications.Herein,we demonstrate an interesting plasmonic photocatalyst based on the construction of icosahedral(Ih)Au@C_(60) core-shell NMs,taking advantage of specific delocalizedπelectrons structure of a tight C_(60) shell and enhanced LSPR property of Ih Au core.Then,the pronounced interfacial interaction at junction region endows the obtained Au@C_(60) NMs with an outstanding photoinduced hot carrier-transmission during photocatalytic reaction,facilitating a remarkably higher(1.89 times)photocatalytic activity toward visible-light driven degradation of crystal violet(CV)dyes,as compared to bare Au NMs.Impressively,the photocatalytic activity of Ih Au@C_(60) NMs can be effectively optimized by changing the p H value of reaction solution,with the kinetic rate constant reaching the maximum value of 0.179 min^(-1) in pH011.4 solution,while 0.005 min^(-1) at pH03.0.Moreover,due to the protection of a tight C_(60) shell,the Ih Au@C_(60) NMs also possess excellent photocatalytic stability/reusability in recycling runs,holding great potential for the design of robust and high-performance plasmonic photocatalysts in repeated practical applications.展开更多
基金supported financially by the Mid-Career Researcher Program through the National Research Foundation of Korea(2016) funded by the Ministry of Education, Science and Technology (2016R1A2B4015481)
文摘An ultrafine-grained（UFG） Mg-13Zn-1.55 Y alloy（ZW132） with a high volume fraction（7.4%） of icosahedral phase（I-phase, Mg;Zn;Y） particles was prepared by applying high-ratio differential speed rolling（HRDSR） on the cast microstructure following homogenization. The alloy exhibited excellent superplasticity at low temperatures(tensile elongations of 455% and 1021% 473 K-10;s;and 523 K-10;s;,respectively). Compared with UFG Mg-9.25Zn-1.66 Y alloy（ZW92） with a lower volume fraction of I-phase particles（4.1%）, which was prepared using the same processing routes, the UFG ZW132 alloy exhibited a higher thermal stability of grain size. Rapid grain coarsening, however, occurred at temperatures beyond523 K, leading to a loss of superplasticity. The high-temperature deformation behavior of the HRDSRprocessed ZW132 alloy could be well described assuming that the mechanisms of grain boundary sliding and dislocation climb creep competed with each other and considering that the grain-size was largely increased by accelerated grain growth at the temperatures beyond 523 K.
基金supported by the National Natural Science Foundation of China(Nos.11362018,11261045,and 11261401)the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20116401110002)
文摘Two kinds of contact problems, i.e., the frictional contact problem and the adhesive contact problem, in three-dimensional （3D） icosahedral quasicrystals are dis- cussed by a complex variable function method. For the frictional contact problem, the contact stress exhibits power singularities at the edge of the contact zone. For the adhe- sive contact problem, the contact stress exhibits oscillatory singularities at the edge of the contact zone. The numerical examples show that for the two kinds of contact problems, the contact stress exhibits singularities, and reaches the maximum value at the edge of the contact zone. The phonon-phason coupling constant has a significant effect on the contact stress intensity, while has little impact on the contact stress distribution regu- lation. The results are consistent with those of the classical elastic materials when the phonon-phason coupling constant is 0. For the adhesive contact problem, the indentation force has positive correlation with the contact displacement, but the phonon-phason cou- pling constant impact is barely perceptible. The validity of the conclusions is verified.
基金supported by the National Natural Science Foundation of China (Grant Nos 10672022 and 10372016)
文摘The dynamic response of an icosahedral Al-Pd Mn quasicrystal with a Griffith crack to impact loading is investigated in this paper. The elastohydrodynamic model for the wave propagation and diffusion together with their interaction is adopted. Numerical results of stress, displacement and dynamic stress intensity factors are obtained by using the finite difference method. The effects of wave propagation, diffusion and phonon-phason coupling on the quasicrystal in the dynamic process are discussed in detail, where the phason dynamics is explored particularly.
基金Project supported by the National Natural Science Foundation of China （Grant No 10372016）.
文摘Based on the displacement potential functions, the elastic analysis of a mode Ⅱ crack in an icosahedral quasicrystal is performed by using the Fourier transform and dual integral equation theory. By the solution, the analytic expressions for the displacement field and stress field are obtained. The asymptotic behaviours of the phonon and phason stress fields around the crack tip indicate that the stresses near the crack tip exhibit a square root singularity. The most important physical quantities of fracture theory, crack stress intensity factor and energy release rate, are evaluated in an explicit version.
基金Project supported by the National Natural Science Foundation of China(Nos.11462020 and 11502123)the Natural Science Foundation of Inner Mongolia(Nos.2017MS0104 and 2017ZRYB003)
文摘An electro-elastic analysis is performed on an icosahedral quasicrystal with piezoelectric effects containing a straight dislocation. The closed-form expressions for the elastic and electric fields are obtained using the extended Stroh formalism. The effects of piezoelectric constant on the phonon displacement, phason displacement, and electric potential are discussed in detail.
基金the National Natural Science Foundation of China(Nos.50571081,50671083)Aeronautical Foundation of China(No.04G53042).
文摘The microstructure formation and mechanical property involving icosahedral quasicrystal （I-phase） in the Y-rich Mg-Zn-Y alloy have been studied. The equilibrium formation of I-phase from the Y-rich Mg-Zn-Y melt is through a peritectic reaction between the Y-rich melt and the primary W-phase, which is discussed in detail. The independent nucleation and coupling growth mechanism between the W-phase and the I-phase, from the melt, are revealed, which is significant for understanding the peritectic reaction process involving icosahedral quasicrystal in the Mg-Zn-Y alloy. The mechanism of the quasicrystal phase strengthened magnesium alloys is also discussed here.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11072104,11272053,and 11262017)the Key Project of Chinese Ministry of Education(Grant No.212029)+3 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region,China(Grant No.2013MS0114)the Natural Science Foundation of Inner Mongolia Department of Public Education,China(Grant No.NJZZ13037)the Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region,China(Grant No.NJYT-13-B07)the Program for Higher-Level Talents of Inner Mongolia University,China(Grant No.125125)
文摘The complex variable method for solving the two-dimensional thermal stress problem of icosahedral quasicrystals is stated. The closed-form solutions for icosahedral quasicrystals containing an elliptical hole subjected to a remote uniform heat flow are obtained. When the hole degenerates into a crack, the explicit solutions for the stress intensity factors is presented.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11072104,1272053,and 11262017)the Key Project of Chinese Ministry of Education(Grant No.212029)+3 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region,China(Grant No.2013MS0114)the Natural Science Foundation of Inner Mongolia Department of Public Education,China(Grant No.NJZZ13037)the Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region,China(Grant No.NJYT-13-B07)the Program of Higher-level Talents of Inner Mongolia University,China(Grant No.125125)
文摘The generalized 2D problem of icosahedral quasicrystals containing an elliptic hole is considered by using the ex- tended Stroh formalism. The closed-form solutions for the displacements and stresses are obtained under general loading conditions. The solution of the Griffith crack problem as a special case of the results is also observed. The stress intensity factor and strain energy release rate are given. The effect of the phonon-phason coupling elastic constant on the mechanical behavior is also discussed.
基金supported by the Youth Science Fund Project of National Natural Science Fund of China (No. 51401070)
文摘In this paper, the microstructure evolution of the rapidly solidified (RS) Mg61.7Zn34Gd4.3 (at%, atomic ratio) alloy at high temperatures was investigated. The hardness and elastic modulus of the main precipitated phases were also analyzed and compared with those of the α-Mg matrix on the basis of nanoindentation tests. The results show that the RS alloy consists of either a petal-like icosahedral quasicrystal (IQC) phase (~20 μm) and block-shaped H1 phase (~15 μm) or IQC particles with an average grain size of ~107 nm as well as a small proportion of amorphous phase, which mainly depends on the holding time at the liquid temperature and the thickness of the ribbons. The IQC phase gradually transforms at 400?C to a short-rod-shaped μ-phase (Mg28.6Zn63.8Gd7.7) with a hexagonal structure. The hardness of the IQC phase is higher than that of H1 phase, and both phases exhibit a higher hardness than the α-Mg matrix and the μ-phase. The elasticity of the H1 phase is superior to that of the α-Mg matrix. The IQC phase possesses a higher elastic modulus than H1 phase. The easily formed H1 phase exhibits the poorest plastic deformation capacity among these phases but a higher elastic modulus than the α-Mg matrix.
基金National Natural Science Funds of China (Grant Nos. 41130104, and 41475031)Open Research Program of Key Laboratory for Aerosol-Cloud-Precipitation of China Meteorological Administration from Nanjing University of Information Science and Technology (Grant No. KDW1302)+4 种基金the Public Meteorology Special Foundation of MOST (Grant No. GYHY201406023)the National Key Basic Research and Development Program (973 Program, 2011CB403401)Teruyuki NAKAJIMA is supported by projects from JAXA/EarthC ARE, MEXT/VL for Climate System Diagnosticsthe MOE/Global Environment Research Fund A-1101, NIES/GOSAT, NIES/CGER, MEXT/RECCA/SALSAthe S-12 of the MOE
文摘Aerosol optical properties are simulated using the Spectral Radiation Transport Model I~）r Aerosol Species （SPRINTARS） coupled with the Non-hydrostatic ICosahedral Atmospheric Model （NICAM）. The 3-year global mean all-sky aerosol optical thickness （AOT） at 550 nm, theAngstr/Sm Exponent （AE） based on AOTs at 440 and 870 nm, and the single scattering albedo （SSA） at 550 nm are estimated at 0.123, 0.657 and 0.944, respectively. For each aerosol species, the mean AOT is within the range of the AeroCom models. Both the modeled all-sky and clear-sky results are compared with observations from the Moderate Resolution Imaging Spectroradiometer （MODIS） and the Aerosol Robotic Network （AERONET）. The simulated spatiotemporal distributions of all-sky AOTs can generally reproduce the MODIS retrievals, and the correlation and model skill can be slightly improved using the clear-sky results over most land regions. The differences between clear-sky and all-sky AOTs are larger over polluted regions. Compared with observations from AERONET, the modeled and observed all-sky AOTs and AEs are generally in reasonable agreement, whereas the SSA variation is not well captured. Although the spatiotemporal distributions of all-sky and clear-sky results are similar, the clear-sky results are generally better correlated with the observations. The clear-sky AOT and SSA are generally lower than the all-sky results, especially in those regions where the aerosol chemical composition is contributed to mostly by sulfate aerosol. The modeled clear-sky AE is larger than the all-sky AE over those regions dominated by hydrophilic aerosol, while the＇opposite is found over regions dominated by hydrophobic aerosol.
基金Project supported by the National Natural Science Foundation of China(Grant No.11172319)the Scientific Fund of Chinese Universities(Grant Nos.2011JS046 and 2013BH008)+1 种基金the Opening Fund of State Key Laboratory of Nonlinear Mechanics,Program for New Century Excellent Talents in University,China(Grant No.NCET-13-0552)the National Science Foundation for Post-doctoral Scientists of China(Grant No.2013M541086)
文摘Icosahedral quasicrystals are the most important and thermodynamically stable in all about 200 kinds of quasicrystals currently observed. Beyond the scope of classical elasticity, apart from a phonon displacement field, there is a phason displacement field in the elasticity of the quasicrystal, which induces an important effect on the mechanical properties of the material and makes an analytical solution difficult to obtain. In this paper, a finite element algorithm for the static elasticity of icosahedral quasicrystals is developed by transforming the elastic boundary value problem of the icosahedral quasicrystals into an equivalent variational problem. Analytical and numerical solutions for an icosahedral A1-Pd-Mn quasicrystal cuboid subjected to a uniaxial tension with different phonon-phason coupling parameters are given to verify the validity of the numerical approach. A comparison between the analytical and numerical solutions of the specimen demonstrates the accuracy and efficiency of the present algorithm. Finally, in order to reveal the fracture behavior of the icosahedral A1-Pd-Mn quasicrystal, a cracked specimen with a finite size of matter is investigated, both with and without phonon-phason coupling. Meanwhile, the geometry factors are calculated, including the stress intensity factor and the crack opening displacement for the finite-size specimen. Computational results reveal the importance of pbonon-phason coupling effect on the icosahedral A1-Pd-Mn quasicrystal. Furthermore, the finite element procedure can be used to solve more complicated boundary value problems.
基金supported by National Natural Science Foundation of China (50571073)Natural Science Foundation of Shanxi Province (2009011028-3,2007011067,20051052)High-School Student Project of Taiyuan City (07010713)
文摘Mg70.8Zn28Nd1.2（mole fraction） alloy containing icosahedral quasicrystal phase （I-phase） was prepared under conventional metal casting conditions. The microstructure, phase constitution and phase structure of the alloy were investigated by means of scanning electron microscopy （SEM）, X-ray diffraction （XRD）, energy dispersive spectrometer （EDS） and transmission electron microscopy （TEM）. The resuits showed that the spherical phase in Mg70.8Zn28Nd1.2 alloy was a simple icosahedral quasicrystal with stoichiometric composition of Mg40Zn55Nd5 and quasi-lattice of 0.525 nm. In this research, the as-cast microstructure of Mg70.8Zn28Nd1.2 alloy mainly consisted of Mg40Zn55Nd5 icosahedral quasicrystal phase and Mg7Zn3 columnar crystal matrix. In the growing process of Mg40Zn55Nd5 icosahedral quasicrystal phase, the growth morphology mainly depended on interface energy, adsorption effect of Nd and cooling rate.
基金supported by the National Natural Science Foundation of China(Grant No.41505066)the Basic Scientific Research and Operation Foundation of Chinese Academy Meteorological Sciences(Grant Nos.2015Z002,2015Y005)the National Research and Development Key Program:Global Change and Mitigation Strategies(No.2016YFA0602101)
文摘An Eulerian flux-form advection scheme, called the Two-step Shape-Preserving Advection Scheme （TSPAS）, was generalized and implemented on a spherical icosahedral hexagonal grid （also referred to as a geodesic grid） to solve the transport equation. The C grid discretization was used for the spatial discretization. To implement TSPAS on an unstructured grid, the original finite-difference scheme was further generalized. The two-step integration utilizes a combination of two separate schemes （a low-order monotone scheme and a high-order scheme that typically cannot ensure monotonicity） to calculate the fluxes at the cell walls （one scheme corresponds to one cell wall）. The choice between these two schemes for each edge depends on a pre-updated scalar value using slightly increased fluxes. After the determination of an appropriate scheme, the final integration at a target cell is achieved by summing the fluxes that are computed by the different schemes. The conservative and shape-preserving properties of the generalized scheme are demonstrated. Numerical experiments are conducted at several horizontal resolutions. TSPAS is compared with the Flux Corrected Transport （FCT） approach to demonstrate the differences between the two methods, and several transport tests are performed to examine the accuracy, efficiency and robustness of the two schemes.
基金supported by the National Natural Science Foundation of China (Grant No.50571081)the Aeronautical Science Foundation of China (Grant No.04G53042)
文摘The microstructure, chemical composition and morphology evolution of icosahedral quasicrystalline phase of Mg67.4Zn28.9Y3.7 ternary alloy were investigated in detail at different pouring temperatures by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and energy-dispersive spectrum （EDS）. Low interracial energy favors the formation of l-phase. The experimental results show that the primary l-phase reveals petal-shaped with five and six branches, where each branch has facetted growth morphology with the size ranging from 50 to 100μm. As the temperature decreases, the polygon-shaped l-phase forms, attributed to the decomposition of branch of petal-shaped l-phase, and then it grows bigger and some of the fine polygons join together to form large polygons. Besides these, （α-Mg＋l-phase） eutectic structures disappear and the relative amount of Mg7Zn3 phase increases as the pouring temperature decreases. The chemical composition and morphology evolution of l-phase were also discussed.
基金financially supported by the National Natural Science Foundation of China(Nos.51274054, U1332115,51401044)the Keygrant Project of Chinese Ministry of Education(No.313011)+1 种基金the Science and Technology Planning Project of Dalian(No.2013A16GX110)the China Postdoctoral Science Foundation(No.2015T80248)
文摘Three-dimensional morphology and formation process of icosahedral quasicrystal phase have been investigated in a melt-spun AI-18Mn alloy （in wt%）. Three distinct layers corresponding to varying temperature gradient have been observed on the cross section of the ribbons. 3D morphologies of cellular and dendritic icosahedral phase have been obtained through electro-etching. A model has been proposed to describe the formation process of the icosahedral phase and a-A1 during the rapid solidification. The icosahedral phases are primarily precipitated from the melt into fine cellular and dendritic particles, and subsequently engulfed by the a-A1 which propagates in a planar morphology.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51871143 and 11972219)the Science and Technology Committee of Shanghai(No.19010500400)+1 种基金Shanghai Rising-Star Program(No.21QA1403200)the Independent Research Project of State Key Laboratory of Mechanical Transmissions of China(No.SKLMT-ZZKT-2021M11).
文摘The quasicrystal phase is beneficial to increasing the strength of magnesium alloys.However,its complicated structure and unclear phase relations impede the design of alloys with good mechanical properties.In this paper,the Mg_(40)Zn_(55)Nd_(5) icosahedral quasicrystal(I-phase)structure is discovered in an as-cast Mg-58Zn-4Nd alloy by atomic resolution high-angle annular dark-field scanning transmission electron microscopy(HAADF-STEM).A cloud-like morphology is observed with Mg_(41.6)Zn_(55.0)Nd_(3.4) composition.The selected area electronic diffrac-tion(SAED)analysis shows that the icosahedral quasicrystal structure has 5-fold,4-fold,3-fold,and 2-fold symmetry zone axes.The thermo-dynamic stability of the icosahedral quasicrystal is investigated by differential scanning calorimetry(DSC)in the annealed alloys.When an-nealed above 300℃,the Mg_(40)Zn_(55)Nd_(5) quasicrystal is found to decompose into a stable ternary phase Mg_(35)Zn_(60)Nd_(5),a binary phase MgZn,andα-Mg,suggesting that the quasicrystal is a metastable phase in the Mg-Zn-Nd system.
文摘Atomically precise gold cluster catalysts have emerged as a new frontier in catalysis science,owing to their unexpected catalytic properties.In this work,we explore the evolution of the catalytic activity of clusters formed by the structural fusion of icosahedral Au13 units,namely Au25(SR)18,Au38(SR)24,and Au25(PPh3)10(SC2H4Ph)5Cl2,in the oxidation of pyrrolidine toγ-butyrolactam.We demonstrate that the structural fusion of icosahedral Au13 units,forming vertex-fused(vf),face-fused(ff),and body-fused(bf)clusters,can induce a decrease in the catalytic activity in the following order:Aubf>Auff>Auvf.The structural fusion of icosahedral Au13 units in the clusters does not distinguish the adsorption modes of pyrrolidine over the three clusters from each other,but modulates the chemical adsorption capacity and electronic properties of the three clusters,which is likely to be the key reason for the observed changes in catalytic reactivity.Our results are expected to be extendable to study and design atomically defined catalysts with elaborate structural patterns,in order to produce desired products.
基金supported by the National Basic Research Program of China(Grant No.2010CB731603)the National Natural Science Foundation of China(Grant Nos.50921091 and 51071170)
文摘The most pronounced β-relaxation was found in the Y-based binary metallic glasses（MGs）. The correlation betweenβ-relaxation and local atomic structure was studied. The dynamic mechanical measurements were performed for three chosen binary systems： Zr-, Ti-, and Y-based MGs. The experimental results show that, in each system,the larger negative enthalpy of mixing（？Hm） between the component elements makes β-relaxation become more pronounced. The less negative value of ？Hm facilitates the formation of icosahedral clusters, which have a pinning effect on the excitation of β-relaxations and correspondingly make the β-relaxation become less pronounced. These chemical effects on β-relaxations can only be compared in the same MG system, and it is not suitable for the comparison between different systems due to the different features of the major metallic elements.
基金Project supported by the National Key R&D Program of China(Grant No.2016YFA0501100)the National Natural Science Foundation of China(Grant Nos.91530321,31570742,and 31570727)Science and Technology Planning Project of Hunan Province,China(Grant No.2017RS3033)
文摘Three-dimensional(3 D)reconstruction of icosahedral viruses has played a crucial role in the development of cryoelectron microscopy single-particle reconstruction,with many cryo-electron microscopy techniques first established for structural studies of icosahedral viruses,owing to their high symmetry and large mass.This review summarizes the computational methods for icosahedral and symmetry-mismatch reconstruction of viruses,as well as the likely challenges and bottlenecks in virus reconstruction,such as symmetry mismatch reconstruction,contrast transformation function(CTF)correction,and particle distortion.
基金financially supported by the National Natural Science Foundation of China(NSFC)(Nos.11905115,11575102)the Shandong Jianzhu University XNBS Foundation(No.1608)the Fundamental Research Fund of Shandong University(No.2018JC022)。
文摘The unique hot carrier-driven direct plasmonic photocatalysis of coinage metal nanomaterials(NMs)via energetic localized surface plasmon resonance(LSPR)in visible-light region has been explored in recent years.However,the low photoinduced electron transfer efficiency and insufficient separation of electronhole pairs would severely preclude their widespread practical applications.Herein,we demonstrate an interesting plasmonic photocatalyst based on the construction of icosahedral(Ih)Au@C_(60) core-shell NMs,taking advantage of specific delocalizedπelectrons structure of a tight C_(60) shell and enhanced LSPR property of Ih Au core.Then,the pronounced interfacial interaction at junction region endows the obtained Au@C_(60) NMs with an outstanding photoinduced hot carrier-transmission during photocatalytic reaction,facilitating a remarkably higher(1.89 times)photocatalytic activity toward visible-light driven degradation of crystal violet(CV)dyes,as compared to bare Au NMs.Impressively,the photocatalytic activity of Ih Au@C_(60) NMs can be effectively optimized by changing the p H value of reaction solution,with the kinetic rate constant reaching the maximum value of 0.179 min^(-1) in pH011.4 solution,while 0.005 min^(-1) at pH03.0.Moreover,due to the protection of a tight C_(60) shell,the Ih Au@C_(60) NMs also possess excellent photocatalytic stability/reusability in recycling runs,holding great potential for the design of robust and high-performance plasmonic photocatalysts in repeated practical applications.
