Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,...Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.展开更多
The rapid expansion of the photovoltaic industry has generated heavily oxidized waste silicon(wSi),which hinders efficient recycling owing to its small particle size and uncontrolled surface oxidation.This study intro...The rapid expansion of the photovoltaic industry has generated heavily oxidized waste silicon(wSi),which hinders efficient recycling owing to its small particle size and uncontrolled surface oxidation.This study introduces a molten salt electrochemical strategy for converting photovoltaic wSi into NiSi_(2)-silicon nanorods(NiSi_(2)-SiNRs)as high-performance anode materials for lithium-ion batteries.A stable oxidized passivation layer is formed on the wSi surface via controlled oxidation,and further in situ generated highly active NiSi_(2) droplets.The molten salt electric field modulates the surface energy of silicon,while particle integration drives localized directional growth,enabling the self-assembly of NiSi_(2)-SiNRs composites.These NiSi_(2)-SiNRs anodes exhibit rapid ion transport and effective strain buffering.The high aspect ratio of SiNRs and the presence of retained NiSi_(2) facilitate both longitudinal and transverse Li^(+) diffusion.Owing to their robust structural design,the NiSi_(2)-SiNRs anode achieves an excellent initial Coulombic efficiency of 91.61%and retains 72.99%of its capacity after 800 cycles at 2 A·g^(−1).This study establishes a model system for investigating silicide/silicon interfaces in molten salt electrochemical synthesis and provides an effective strategy for upcycling photovoltaic wSi into high-performance lithium-ion battery anodes.展开更多
Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes...Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes during repeated charge–discharge cycles. In this work, a “soft-hard”double-layer coating has been proposed and carried out on ball-milled silicon particles. It is composed of inside conductive pathway and outside elastic coating, which is achieved by decomposing a conductive graphite layer on the silicon surface and further coating it with a polymer layer.The incorporation of the second elastic coating on the inside carbon coating enables silicon particles strongly interacted with binders, thereby making the electrodes displaying an obviously improved cycling stability. As-obtained double-coated silicon anodes deliver a reversible capacity of 2280 m Ah g^(-1)at the voltage of 0.05–2 V, and maintains over 1763 mAh g^(-1)after 50 cycles. The double-layer coating does not crack after the repeated cycling, critical for the robust performance of the electrodes. In addition, as-obtained silicon particles are mixed with commercial graphite to make actual anodes for lithium-ion batteries. A capacity of 714 mAh g^(-1)has been achieved based on the total mass of the electrodes containing 10 wt.% double-coated silicon particles. Compared with traditional carbon coating or polymeric coating, the double-coating electrodes display a much better performance. Therefore, the double-coating strategy can give inspiration for better design and synthesis of silicon anodes, as well as other battery materials.展开更多
Silicon(Si)anodes,with a theoretical specific capacity of 4200 mAh g^(-1),hold significant promise for the development of high-energy-density lithium-ion batteries(LIBs).However,practical applications are hindered by ...Silicon(Si)anodes,with a theoretical specific capacity of 4200 mAh g^(-1),hold significant promise for the development of high-energy-density lithium-ion batteries(LIBs).However,practical applications are hindered by sluggish charge transfer kinetics,substantial volume expansion,and an unstable solid elec-trolyte interphase during cycling.To address these challenges,we propose a centimeter-scale Si anode design featuring a three-dimensional continuous network structure of Si nanowires(SiNWs)decorated with high-density Ag nanoparticles(Ag-SiNWs-Net)on both the surface and internally.This architecture effectively mitigates mechanical stress from Si volume changes through the high-aspect-ratio wire network.Additionally,the distribution of Ag nanoparticles on the Si induces electronic structure redistribution,generating built-in electric fields that accelerate charge transfer within the Si,significantly enhancing rate performance and cycling stability.The Ag-SiNWs-Net anode achieves a high reversible capacity of 3780.9 mAh g^(-1)at 0.1 A g^(-1),with an initial coulombic efficiency of 85.1%.Moreover,the energy density of full cells assembled with Ag-SiNWs-Net anodes and LiFePO4 cathodes can be pushed further up to 395.8 Wh kg^(-1).This study offers valuable insights and methodologies for the development of high-capacity and practical Si anodes-.展开更多
Micro-silicon(Si)anode that features high theoretical capacity and fine tap density is ideal for energy-dense lithiumion batteries.However,the substantial localized mechanical strain caused by the large volume expansi...Micro-silicon(Si)anode that features high theoretical capacity and fine tap density is ideal for energy-dense lithiumion batteries.However,the substantial localized mechanical strain caused by the large volume expansion often results in electrode disintegration and capacity loss.Herein,a microporous Si anode with the SiO_(x)/C layer functionalized all-surface and high tap density(~0.65 g cm^(-3))is developed by the hydrolysis-driven strategy that avoids the common use of corrosive etchants and toxic siloxane reagents.The functionalized inner pore with superior structural stability can effectively alleviate the volume change and enhance the electrolyte contact.Simultaneously,the outer particle surface forms a continuous network that prevents electrolyte parasitic decomposition,disperses the interface stress of Si matrix and facilitates electron/ion transport.As a result,the micron-sized Si anode shows only~9.94 GPa average stress at full lithiation state and delivers an impressive capacity of 901.1 mAh g^(-1)after 500 cycles at 1 A g^(-1).It also performs excellent rate performance of 1123.0 mAh g^(-1)at 5 A g^(-1)and 850.4 at 8 A g^(-1),far exceeding most of reported literatures.Furthermore,when paired with a commercial LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2),the pouch cell demonstrates high capacity and desirable cyclic performance.展开更多
In this work,the Si@reduced graphene oxide/ZrO_(2)(Si@rGO/ZrO_(2))with the shelled structures is prepared for the high-capacity and stable lithium-ion batteries.The shelled structure not only significantly improves th...In this work,the Si@reduced graphene oxide/ZrO_(2)(Si@rGO/ZrO_(2))with the shelled structures is prepared for the high-capacity and stable lithium-ion batteries.The shelled structure not only significantly improves the electrical conductivity of the whole electrode,but also protects the inner Si nanoparticles(Si NPs)from rupturing and being damaged by undesired side reactions with the electrolyte.As a result,the Si@rGO/ZrO_(2) anode delivers high initial discharge capacity of 3046 mAh·g^(−1) at 1.0 A·g^(−1).After 100 cycles,it can be maintained at 613 mAh·g^(−1),which is much higher than that of either the pure Si NPs(31 mAh·g^(−1))or the Si@rGO(261 mAh·g^(−1)).Even at 2 A·g^(−1),it still provides superior specific capacity of 834 mAh·g^(−1),while the pure Si anode merely possesses the capacity of 41 mAh·g^(−1).Moreover,the density functional theory calculations point out that ZrO_(2) layer can effectively enhance the adsorption energy of Li+and optimize the migration paths of Li+,ensuring the electrochemical performance of Si@rGO/ZrO_(2) composite anode.Furthermore,the Li+storage mechanism and low volume expansion of Si@rGO/ZrO_(2) anode is investigated by ex-situ X-ray photoelectron spectroscopy and morphological evolution upon cycling,respectively.展开更多
Silicon(Si)is considered one of the most promising anode materials for next-generation lithium-ion batteries due to its ultrahigh theoretical capacity.However,its application is significantly limited by severe volume ...Silicon(Si)is considered one of the most promising anode materials for next-generation lithium-ion batteries due to its ultrahigh theoretical capacity.However,its application is significantly limited by severe volume expansion,leading to structural degradation and poor cycling stability.Polymer binders play a critical role in addressing these issues by providing mechanical stabilization.Inspired by the mechanically adaptive architecture of spider webs,where stiff radial threads and extensible spiral threads act in synergy,a dual-thread architecture polymer binder(PALT)with energy dissipation ability enabled by integrating rigid and flexible domains is designed.The rigid poly(acrylic acid lithium)(PAALi)segments offer structural reinforcement,while the soft segments(poly(lipoic acid-tannic acid),LT)introduce dynamic covalent bonds and multiple hydrogen bonds that function as reversible sacrificial bonds,enhancing energy dissipation during cycling.Comprehensive experimental and computational analyses demonstrate effectively reduced stress concentration,improved structural integrity,and stable electrochemical performance over prolonged cycling.The silicon anode incorporating the PALT binder exhibits a satisfying capacity loss per cycle of 0.042% during 350 charge/discharge cycles at 3580 m A g^(-1).This work highlights a bioinspired binder design strategy that combines intrinsic rigidity with dynamic stress adaptability to advance the mechanical and electrochemical stability of silicon anodes.展开更多
Polyacrylic acid(PAA)-based binders have been demonstrated to significantly enhance the cycling stability of pure silicon(Si)anodes compared to other binder types.However,there is a notable lack of systematic and in-d...Polyacrylic acid(PAA)-based binders have been demonstrated to significantly enhance the cycling stability of pure silicon(Si)anodes compared to other binder types.However,there is a notable lack of systematic and in-depth investigation into the relationship between the molecular weight(MW)of PAA and its performance in pure Si anodes,leading to an absence of reliable theoretical guidance for designing and optimizing of PAA-based binders for these anodes.Herein,we select a series of PAA with varying MWs as binders for Si nanoparticle(SiNP)anodes to systematically identify the optimal MW of PAA for enhancing the electrochemical performance of SiNP anodes.The actual MWs of the various PAA were confirmed by gel permeation chromatography to accurately establish the relationship between MW and binder performance.Within an ultrawide weight average molecular weight(M_(w))range of 35.9-4850 kDa,we identify that the PAA binder with a M_(w)of 1250 kDa(PAA125)exhibits the strongest mechanical strength and the highest adhesion strength,attributed to its favorable molecular chain orientation and robust interchain interactions.These characteristics enable the SiNP anodes utilizing PAA125 to maintain the best interfacial chemistry and bulk mechanical structure stability,leading to optimal electrochemical performance.Notably,the enhancement in cycling stability of SiNP anode by PAA125 under practical application conditions is further validated by the 1.1 Ah LLNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/SiNP@PAA125 pouch cell.展开更多
This study presents a novel approach to enhance silicon anode performance through barium titanate(BTO)incorporation,with the establishment of a force-electric coupling model.By introducing piezoelectric BTO into silic...This study presents a novel approach to enhance silicon anode performance through barium titanate(BTO)incorporation,with the establishment of a force-electric coupling model.By introducing piezoelectric BTO into silicon matrices,we successfully improved both the mechanical stability and electrochemical kinetics of the anode.The developed force-electric coupling model explains how BTO mitigates stress accumulation during lithiation while optimizing the kinetics of Li^(+)and electron transfer.Experimental verification and multiphysical simulation indicate that Si@BTO effectively eliminates structural degradation during the cycling process and significantly reduces the charge transfer resistance.The force-electric coupling mechanism further facilitates stable solid electrolyte interphase(SEI)formation.When paired with LiFePO_(4)cathodes,Si@BTO maintains 76% capacity retention after 500 cycles at a 10 C rate.This work establishes a basic force-electric coupling model framework and offers insights into the development of advanced silicon anode batteries with exceptional performance.展开更多
To effectively enhanced structural stability and cycling performance,a dual carbon protection strategy is proposed to fabricate Si nanoparticles encapsulated in citric acid(CA)-derived inner carbon layer and zeolitic ...To effectively enhanced structural stability and cycling performance,a dual carbon protection strategy is proposed to fabricate Si nanoparticles encapsulated in citric acid(CA)-derived inner carbon layer and zeolitic imidazolate framework-67(ZIF-67) derived outer carbon layer(Si@C-CA@c-ZIF).The results reveal that citric acid-derived carbon facilitates a uniform ZIF-67 coating on the Si surface and serves as the inner carbon precursor to reduce volumetric expansion of Si particles,more importantly,it can enhance the transport of electrons and ions between Si particles and ZIF-67-derived carbon.The ZIF-67-derived outer carbon layer further restricts Si particle expansion and enhances conductivity.Evaluated as anode material for lithium ion batteries,the Si@C-CA@c-ZIF anode demonstrates outstanding lithium storage performance,the high specific capacity is high to 924 m A·h·g^(-1)at 1.0 A·g^(-1) after 10 cycles of activation,and it still maintains a reversible capacity of 703.3 m A·h·g^(-1) after 1000 cycles,along with a capacity retention of 76.1%.This work highlights the effectiveness of the dual carbon framework in addressing the volume expansion and conductivity limitations of Si,with potential applications for other high-capacity anode materials.展开更多
The intrinsic volume changes(about 300%)of Si anode during the lithiation/delithiation leads to the serious degradation of battery performance despite of theoretical capacity of 3579 mAh g^(-1) of Si.Herein,a three-di...The intrinsic volume changes(about 300%)of Si anode during the lithiation/delithiation leads to the serious degradation of battery performance despite of theoretical capacity of 3579 mAh g^(-1) of Si.Herein,a three-dimensional(3D)conductive polymer binder with adjustable crosslinking density has been designed by employing citric acid(CA)as a crosslinker between the carboxymethyl cellulose(CMC)and the poly(3,4-ethylenedioxythiophene)poly-(styrene-4-sulfonate)(PEDOT:PSS)to stabilize Si anode.By adjusting the crosslinking density,the binder can achieve a balance between rigidity and flexibility to adapt the volume expansion upon lithiation and reversible volume recovery after delithiation of Si.Therefore,Si/CMC-CA-PEDOT:PSS(Si/CCP)electrode demonstrates an excellent performance with high capacities of 2792.3 mAh g^(-1) at 0.5 A g^(-1) and a high area capacity above 2.6 mAh cm^(-2) under Si loading of 1.38 mg cm^(-2).The full cell Si/CCP paired with Li(Ni_(0.8)Co_(0.1)Mn_(0.1))O_(2) cathode discharges a capacity of 199.0 mAh g^(-1) with 84.3%ICE at 0.1 C and the capacity retention of 95.6%after 100 cycles.This work validates the effectiveness of 3D polymer binder and provides new insights to boost the performance of Si anode.展开更多
While silicon/carbon(Si/C)is considered one of the most promising anode materials for the next generation of high-energy lithium-ion batteries(LIBs),the industrialization of Si/C anodes is hampered by high-cost and lo...While silicon/carbon(Si/C)is considered one of the most promising anode materials for the next generation of high-energy lithium-ion batteries(LIBs),the industrialization of Si/C anodes is hampered by high-cost and low product yield.Herein,a high-yield strategy is developed in which photovoltaic waste silicon is converted to cost-effective graphitic Si/C composites(G-Si@C)for LIBs.The introduction of a binder improves the dispersion and compatibility of silicon and graphite,enhances particle sphericity,and significantly reduces the loss rate of the spray prilling process(from about 25%to 5%).As an LIB anode,the fabricated G-Si@C composites exhibit a capacity of 605 mAh g^(-1) after 1200 cycles.The cost of manufacturing Si/C anode materials has been reduced to approximately$7.47 kg^(-1),which is close to that of commercial graphite anode materials($5.0 kg^(-1)),and significantly lower than commercial Si/C materials(ca.$20.74 kg^(-1)).Moreover,the G-Si@C material provides approximately 81.0 Ah/$of capacity,which exceeds the current best commercial graphite anodes(70.0 Ah/$)and Si/C anodes(48.2 Ah/$).The successful implementation of this pathway will significantly promote the industrialization of high-energydensity Si/C anode materials.展开更多
There is an urgent need to develop high-areal-capacity silicon(Si)anodes with good cycling stability and rate capability for high-energy-density lithium-ion batteries(LIBs).However,this remains a huge challenge due to...There is an urgent need to develop high-areal-capacity silicon(Si)anodes with good cycling stability and rate capability for high-energy-density lithium-ion batteries(LIBs).However,this remains a huge challenge due to large volume expansion-induced mechanical degradation and electrical connectivity loss in thick electrodes.Here,a three-in-one strategy is proposed to achieve high-areal-capacity silicon anodes by constructing a multi-level interconnected 3D porous and robust conductive network that carbon nanofibers and vertical carbon nanosheets tightly encapsulate on the surface of Si nanoparticles(Si NPs)anchored in porous carbon felts.This network accommodates large volume expansion of Si NPs to significantly improve electrode mechanical stability and creates excellent electrical connectivity to boost charge transport in thick electrodes,revealed through Multiphysics field simulations and in situ electrochemical techniques.Therefore,the designed Si anodes achieve superior long-term stability with a capacity of 8.13 mAh cm^(-2)after 500 cycles and an ultrahigh areal capacity of 45.8 mAh cm^(-2).In particular,Ah-level pouch cells demonstrate an impressive capacity retention of 79.34%after 500 cycles at 1 C.Our study offers novel insights and directions for understanding and optimizing high-areal-capacity silicon-carbon composite anodes.展开更多
Silicon-based materials are considered as the next generation anode to replace graphite due to their low cost and ultra-high theoretical capacity.However,significant volume expansion and contraction occur during charg...Silicon-based materials are considered as the next generation anode to replace graphite due to their low cost and ultra-high theoretical capacity.However,significant volume expansion and contraction occur during charging and discharging processes,leading to the instability of electrode structure and susceptibility to peeling and damage,limiting its application.Constructing controllable molecular artificial solid electrolyte interphase(CMASEI)is an effective approach to address the commercialization of silicon-based anode materials[1].Improving the performance of silicon-based anodes through CMASEI is a multifaceted outcome.展开更多
In this work, a scalable and cost-effective method including mechanical milling, centrifugation and spray drying was developed to fabricate Si nanoparticles.The synthesized Si nanoparticles show an average size of 62 ...In this work, a scalable and cost-effective method including mechanical milling, centrifugation and spray drying was developed to fabricate Si nanoparticles.The synthesized Si nanoparticles show an average size of 62 nm and exhibit a narrow particle size distribution. The influence of particle sizes on electrochemical performance of Si-based electrode was investigated, and it is found that as the particle size decreases in the studied range, the Si particles show a lower specific capacity and a higher irreversible capacity loss(ICL). Furthermore, an oxide layer with thickness of ～3 nm was detected on the surface of the as-received Si nanoparticles, and this layer can be effectively removed by hydrofluoric acid(HF) etching,resulting in much improved electrochemical performance over the as-received samples.展开更多
Polymer binder plays a pivotal role in electrochemical performance of high-capacity silicon(Si)anode that usually suffers from severe capacity fading due to enormous substantial volume change of Si during cycling.In a...Polymer binder plays a pivotal role in electrochemical performance of high-capacity silicon(Si)anode that usually suffers from severe capacity fading due to enormous substantial volume change of Si during cycling.In an effort to find efficient polymer binder that could mitigate such capacity fading,alginate-carboxymethyl chitosan(Alg-C-chitosan)composite polymer was investigated as a low-cost watersoluble binder for silicon anodes in lithium-ion batteries.The electrostatic interaction between carboxylate(-COO-)of Alg and protonated amines(-NH3+)of C-chitosan forms a selfhealing porous scaffold structure.Synergistic effect on the enhanced porous scaffold structure and self-healing electrostatic interaction of Alg-C-chitosan binder effectively can tolerate the tremendous volume change of Si and maintain an integrated electrode structure during cycling process.The Si nanopowder electrodes with Alg-C-chitosan composite binder exhibit an excellent cycling stability,with a capacity of750 mAh·g-1 remaining after 100 th cycling.In addition,an extraordinary areal capacity of 3.76 mAh·cm-2 is achieved for Si-based anodes with Alg-C-chitosan binder.展开更多
Silicon （Si） has been considered as one of the most promising anode material for tHe next generation lithium-ion batteries （LIBs） with high energy densities, due to its high theoretical capacity, abundant availabi...Silicon （Si） has been considered as one of the most promising anode material for tHe next generation lithium-ion batteries （LIBs） with high energy densities, due to its high theoretical capacity, abundant availability and environmental friendliness. However. silicon materials with low intrinsic electric and ionic conductivity suffer from huge volume variation during lithiation/delithiation processes leading to the pulverization of Si and subsequently resulting in severe capacity fading of the electrodes. Coupling of Si with carbon （C） realizes a favorable combination of the two materials properties, such as high lithiation capacity of Si and excellent mechanical and conductive properties of C. making silicon/carbon composite （Si/C） ideal candidates for LIBs anodes. In this review, recent progresses of Si/C materials utilized in LIBs are summarized in terms of structural design principles, material synthesis methods, morphological characteristics and electrochemical performances by highlighting the material structures. The mechanisms behind the performance enhancement are also discussed. Moreover, other factors that affect the performance of Si/C anodes, such as prelithiation, electrolyte additives, and binders, are also discussed. We aim to present a full scope of the Si/C-based anodes, and help understand and design future structures of Si/C anodes in LIBs,展开更多
Silicon anodes have drawn ever-increasing attention in lithium-ion batteries(LIBs) owing to their extremely high theoretical capacity and abundance in the earth. Despite promising advantages, the wide use of silicon a...Silicon anodes have drawn ever-increasing attention in lithium-ion batteries(LIBs) owing to their extremely high theoretical capacity and abundance in the earth. Despite promising advantages, the wide use of silicon anodes in LIBs is highly hindered by their fast capacity fading and low Coulombic efficiency arising from their substantial volumetric variation(>300%). Herein, we report a novel aqueous hybrid gel binder for silicon anodes via crosslinking sodium carboxymethyl cellulose(NaCMC) by an inorganic crosslinker-sodium borate. Not only this gel polymer binder can chemically bond to silicon nanoparticle, but also the deformable framework of this crosslinked binder is capable of maintaining electrode integrity, thus buffering dramatic volume change of silicon. Consequently, the silicon anode with this gel binder exhibits good cycle life(1211.5 mAh/g after 600 cycles) and high initial Coulombic efficiency(88.95%).展开更多
Silicon has been investigated extensively as a promising anode material for rechargeable lithium-ion bat- teries. Understanding the failure mechanism of silicon-based anode electrodes for lithium-ion batteries is esse...Silicon has been investigated extensively as a promising anode material for rechargeable lithium-ion bat- teries. Understanding the failure mechanism of silicon-based anode electrodes for lithium-ion batteries is essential to solve the problem of low coulombic efficiency and capacity fading on cycling and also to further commercialize this very new energetic material in cells. To reach this goal, the structure changes of bulk silicon particles and electrode after cycling were studied using ex-situ scanning electron microscopy （SEM） and X-ray diffraction （XRD） techniques. The SEM images indicated that the microstructural changes of the bulk silicon particles during cycling led to a layer rupture of the electrode and then the breakdown of the conductive network and the failure of the electrode. The result contributes to the basic understanding of the failure mechanism of a bulk sil- icon anode electrode for lithium-ion batteries.展开更多
Silicon has been investigated intensively as a promising anode material for rechargeable lithium-ion batteries. The choice of a binder is very important to solve the problem of the large capacity fade observed along c...Silicon has been investigated intensively as a promising anode material for rechargeable lithium-ion batteries. The choice of a binder is very important to solve the problem of the large capacity fade observed along cycling. The effect of modified elastomeric binders on the electrochemical performance of crystalline nano-silicon powders was studied. Compared with the conventional binder （polyvinylidene fluoride （PVDF））, Si electrodes using the elastomeric styrene butadiene rubber （SBR） and sodium carboxymethyl cellulose （SCMC） com- bined binder show an improved cycling performance. The reversible capacity of the Si electrode with the SCMC/SBR binder is as high as 2221 mA.h/g for 30 cycles in a voltage window between 0.005 and 2 V. The structure changes from SEM images of the silicon electrodes with different binders were used to explore the property improvement.展开更多
基金supported by Korea Electrotechnology Research Institute(KERI)Primary research program through the National Research Council of Science&Technology(NST)funded by the Ministry of Science and ICT(MSIT)(No.25A01015)by the Technology Innovation Program(20019091)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)by the National Research Council of Science&Technology(NST)grant from the Korea government(MSIT)(No.GTL24012-000).
文摘Carbon coatings for silicon(Si)-based anode materials are essential for designing high-performance Li-ion batteries(LIBs).The coatings prevent direct contact with the electrolyte and enhance anode performance.However,conventional carbon coatings are limited by their volume expansion and structural degradation,which lead to capacity fading and reduced durability.This study introduces a scalable and practical one-step carbon-coating strategy for directly coating silicon suboxide(SiO_(x))-based materials using aqueous quasi-defect-free reduced graphene oxide(QrGO)without post-treatment,unlike conventional graphene oxide(GO)-based coating methods.This simple process enables uniform encapsulation with QrGO for a highly adhesive and conductive coating.The QrGO-based composite anode material has several advantages,including reduced cracking due to volume expansion and enhanced charge carrier transport,as well as an increased Si content of 20 wt.%compared to the 5 wt.%in typical commercial Si-based active materials.In particular,the capacity retention of the QrGO-coated Si electrodes dramatically increases at high C-rate.The full cell exhibited long-term stability and capacity that were twice that of commercial SiO_(x)-based cells.Therefore,the QrGO-based one-step coating process represents a scalable,transformative,and commercially viable strategy for developing high-performance LIBs.
基金supported by the Yunnan Province Basic Research General Program,China(No.202201BE070001-002)the Major Science and Technology Projects in Yunnan Province,China(No.202402AF 080005).
文摘The rapid expansion of the photovoltaic industry has generated heavily oxidized waste silicon(wSi),which hinders efficient recycling owing to its small particle size and uncontrolled surface oxidation.This study introduces a molten salt electrochemical strategy for converting photovoltaic wSi into NiSi_(2)-silicon nanorods(NiSi_(2)-SiNRs)as high-performance anode materials for lithium-ion batteries.A stable oxidized passivation layer is formed on the wSi surface via controlled oxidation,and further in situ generated highly active NiSi_(2) droplets.The molten salt electric field modulates the surface energy of silicon,while particle integration drives localized directional growth,enabling the self-assembly of NiSi_(2)-SiNRs composites.These NiSi_(2)-SiNRs anodes exhibit rapid ion transport and effective strain buffering.The high aspect ratio of SiNRs and the presence of retained NiSi_(2) facilitate both longitudinal and transverse Li^(+) diffusion.Owing to their robust structural design,the NiSi_(2)-SiNRs anode achieves an excellent initial Coulombic efficiency of 91.61%and retains 72.99%of its capacity after 800 cycles at 2 A·g^(−1).This study establishes a model system for investigating silicide/silicon interfaces in molten salt electrochemical synthesis and provides an effective strategy for upcycling photovoltaic wSi into high-performance lithium-ion battery anodes.
基金supported by the National Natural Science Foundation of China (No. 22008256)。
文摘Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes during repeated charge–discharge cycles. In this work, a “soft-hard”double-layer coating has been proposed and carried out on ball-milled silicon particles. It is composed of inside conductive pathway and outside elastic coating, which is achieved by decomposing a conductive graphite layer on the silicon surface and further coating it with a polymer layer.The incorporation of the second elastic coating on the inside carbon coating enables silicon particles strongly interacted with binders, thereby making the electrodes displaying an obviously improved cycling stability. As-obtained double-coated silicon anodes deliver a reversible capacity of 2280 m Ah g^(-1)at the voltage of 0.05–2 V, and maintains over 1763 mAh g^(-1)after 50 cycles. The double-layer coating does not crack after the repeated cycling, critical for the robust performance of the electrodes. In addition, as-obtained silicon particles are mixed with commercial graphite to make actual anodes for lithium-ion batteries. A capacity of 714 mAh g^(-1)has been achieved based on the total mass of the electrodes containing 10 wt.% double-coated silicon particles. Compared with traditional carbon coating or polymeric coating, the double-coating electrodes display a much better performance. Therefore, the double-coating strategy can give inspiration for better design and synthesis of silicon anodes, as well as other battery materials.
基金supported by the National Natural Science Foundation of China(No.61904130)the Key Research and Development Program of Hubei Province(Nos.2023BAB122,2021BAA063,and 2020BAB084)the Key Laboratory of Coal Conversion and New Carbon Materials in Hubei Province(No.WKDM201907)for their invaluable support.
文摘Silicon(Si)anodes,with a theoretical specific capacity of 4200 mAh g^(-1),hold significant promise for the development of high-energy-density lithium-ion batteries(LIBs).However,practical applications are hindered by sluggish charge transfer kinetics,substantial volume expansion,and an unstable solid elec-trolyte interphase during cycling.To address these challenges,we propose a centimeter-scale Si anode design featuring a three-dimensional continuous network structure of Si nanowires(SiNWs)decorated with high-density Ag nanoparticles(Ag-SiNWs-Net)on both the surface and internally.This architecture effectively mitigates mechanical stress from Si volume changes through the high-aspect-ratio wire network.Additionally,the distribution of Ag nanoparticles on the Si induces electronic structure redistribution,generating built-in electric fields that accelerate charge transfer within the Si,significantly enhancing rate performance and cycling stability.The Ag-SiNWs-Net anode achieves a high reversible capacity of 3780.9 mAh g^(-1)at 0.1 A g^(-1),with an initial coulombic efficiency of 85.1%.Moreover,the energy density of full cells assembled with Ag-SiNWs-Net anodes and LiFePO4 cathodes can be pushed further up to 395.8 Wh kg^(-1).This study offers valuable insights and methodologies for the development of high-capacity and practical Si anodes-.
基金supported by the National Natural Science Foundation of China Projects(Nos.52271213,52202299).
文摘Micro-silicon(Si)anode that features high theoretical capacity and fine tap density is ideal for energy-dense lithiumion batteries.However,the substantial localized mechanical strain caused by the large volume expansion often results in electrode disintegration and capacity loss.Herein,a microporous Si anode with the SiO_(x)/C layer functionalized all-surface and high tap density(~0.65 g cm^(-3))is developed by the hydrolysis-driven strategy that avoids the common use of corrosive etchants and toxic siloxane reagents.The functionalized inner pore with superior structural stability can effectively alleviate the volume change and enhance the electrolyte contact.Simultaneously,the outer particle surface forms a continuous network that prevents electrolyte parasitic decomposition,disperses the interface stress of Si matrix and facilitates electron/ion transport.As a result,the micron-sized Si anode shows only~9.94 GPa average stress at full lithiation state and delivers an impressive capacity of 901.1 mAh g^(-1)after 500 cycles at 1 A g^(-1).It also performs excellent rate performance of 1123.0 mAh g^(-1)at 5 A g^(-1)and 850.4 at 8 A g^(-1),far exceeding most of reported literatures.Furthermore,when paired with a commercial LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2),the pouch cell demonstrates high capacity and desirable cyclic performance.
基金supported by the Natural Science Foundation of Ningxia(No.2022AAC05014).
文摘In this work,the Si@reduced graphene oxide/ZrO_(2)(Si@rGO/ZrO_(2))with the shelled structures is prepared for the high-capacity and stable lithium-ion batteries.The shelled structure not only significantly improves the electrical conductivity of the whole electrode,but also protects the inner Si nanoparticles(Si NPs)from rupturing and being damaged by undesired side reactions with the electrolyte.As a result,the Si@rGO/ZrO_(2) anode delivers high initial discharge capacity of 3046 mAh·g^(−1) at 1.0 A·g^(−1).After 100 cycles,it can be maintained at 613 mAh·g^(−1),which is much higher than that of either the pure Si NPs(31 mAh·g^(−1))or the Si@rGO(261 mAh·g^(−1)).Even at 2 A·g^(−1),it still provides superior specific capacity of 834 mAh·g^(−1),while the pure Si anode merely possesses the capacity of 41 mAh·g^(−1).Moreover,the density functional theory calculations point out that ZrO_(2) layer can effectively enhance the adsorption energy of Li+and optimize the migration paths of Li+,ensuring the electrochemical performance of Si@rGO/ZrO_(2) composite anode.Furthermore,the Li+storage mechanism and low volume expansion of Si@rGO/ZrO_(2) anode is investigated by ex-situ X-ray photoelectron spectroscopy and morphological evolution upon cycling,respectively.
基金the National Natural Science Foundation of China(32201497)for the financial support of this research。
文摘Silicon(Si)is considered one of the most promising anode materials for next-generation lithium-ion batteries due to its ultrahigh theoretical capacity.However,its application is significantly limited by severe volume expansion,leading to structural degradation and poor cycling stability.Polymer binders play a critical role in addressing these issues by providing mechanical stabilization.Inspired by the mechanically adaptive architecture of spider webs,where stiff radial threads and extensible spiral threads act in synergy,a dual-thread architecture polymer binder(PALT)with energy dissipation ability enabled by integrating rigid and flexible domains is designed.The rigid poly(acrylic acid lithium)(PAALi)segments offer structural reinforcement,while the soft segments(poly(lipoic acid-tannic acid),LT)introduce dynamic covalent bonds and multiple hydrogen bonds that function as reversible sacrificial bonds,enhancing energy dissipation during cycling.Comprehensive experimental and computational analyses demonstrate effectively reduced stress concentration,improved structural integrity,and stable electrochemical performance over prolonged cycling.The silicon anode incorporating the PALT binder exhibits a satisfying capacity loss per cycle of 0.042% during 350 charge/discharge cycles at 3580 m A g^(-1).This work highlights a bioinspired binder design strategy that combines intrinsic rigidity with dynamic stress adaptability to advance the mechanical and electrochemical stability of silicon anodes.
基金funding supports of the National Natural Science Foundation of China(52402315,52172244,51874104,and 52172190)the"Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang"(2023R01007)the Zhejiang Provincial"Jianbing"and"Lingyan"R&D Programs(Grant No.2024C01262)。
文摘Polyacrylic acid(PAA)-based binders have been demonstrated to significantly enhance the cycling stability of pure silicon(Si)anodes compared to other binder types.However,there is a notable lack of systematic and in-depth investigation into the relationship between the molecular weight(MW)of PAA and its performance in pure Si anodes,leading to an absence of reliable theoretical guidance for designing and optimizing of PAA-based binders for these anodes.Herein,we select a series of PAA with varying MWs as binders for Si nanoparticle(SiNP)anodes to systematically identify the optimal MW of PAA for enhancing the electrochemical performance of SiNP anodes.The actual MWs of the various PAA were confirmed by gel permeation chromatography to accurately establish the relationship between MW and binder performance.Within an ultrawide weight average molecular weight(M_(w))range of 35.9-4850 kDa,we identify that the PAA binder with a M_(w)of 1250 kDa(PAA125)exhibits the strongest mechanical strength and the highest adhesion strength,attributed to its favorable molecular chain orientation and robust interchain interactions.These characteristics enable the SiNP anodes utilizing PAA125 to maintain the best interfacial chemistry and bulk mechanical structure stability,leading to optimal electrochemical performance.Notably,the enhancement in cycling stability of SiNP anode by PAA125 under practical application conditions is further validated by the 1.1 Ah LLNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/SiNP@PAA125 pouch cell.
基金the financial support of the National Natural Science Foundation of China(NSFC,No.12074093)。
文摘This study presents a novel approach to enhance silicon anode performance through barium titanate(BTO)incorporation,with the establishment of a force-electric coupling model.By introducing piezoelectric BTO into silicon matrices,we successfully improved both the mechanical stability and electrochemical kinetics of the anode.The developed force-electric coupling model explains how BTO mitigates stress accumulation during lithiation while optimizing the kinetics of Li^(+)and electron transfer.Experimental verification and multiphysical simulation indicate that Si@BTO effectively eliminates structural degradation during the cycling process and significantly reduces the charge transfer resistance.The force-electric coupling mechanism further facilitates stable solid electrolyte interphase(SEI)formation.When paired with LiFePO_(4)cathodes,Si@BTO maintains 76% capacity retention after 500 cycles at a 10 C rate.This work establishes a basic force-electric coupling model framework and offers insights into the development of advanced silicon anode batteries with exceptional performance.
基金financially supported by Industry foresight and common key technology research in Carbon Peak and Carbon Neutrality Special Project from Zhenjiang city (CG2023003)National Natural Science Foundation of China (22379056,22409076)。
文摘To effectively enhanced structural stability and cycling performance,a dual carbon protection strategy is proposed to fabricate Si nanoparticles encapsulated in citric acid(CA)-derived inner carbon layer and zeolitic imidazolate framework-67(ZIF-67) derived outer carbon layer(Si@C-CA@c-ZIF).The results reveal that citric acid-derived carbon facilitates a uniform ZIF-67 coating on the Si surface and serves as the inner carbon precursor to reduce volumetric expansion of Si particles,more importantly,it can enhance the transport of electrons and ions between Si particles and ZIF-67-derived carbon.The ZIF-67-derived outer carbon layer further restricts Si particle expansion and enhances conductivity.Evaluated as anode material for lithium ion batteries,the Si@C-CA@c-ZIF anode demonstrates outstanding lithium storage performance,the high specific capacity is high to 924 m A·h·g^(-1)at 1.0 A·g^(-1) after 10 cycles of activation,and it still maintains a reversible capacity of 703.3 m A·h·g^(-1) after 1000 cycles,along with a capacity retention of 76.1%.This work highlights the effectiveness of the dual carbon framework in addressing the volume expansion and conductivity limitations of Si,with potential applications for other high-capacity anode materials.
基金Financial support by the NSFC no. 52371224, 51972156, and 51872131
文摘The intrinsic volume changes(about 300%)of Si anode during the lithiation/delithiation leads to the serious degradation of battery performance despite of theoretical capacity of 3579 mAh g^(-1) of Si.Herein,a three-dimensional(3D)conductive polymer binder with adjustable crosslinking density has been designed by employing citric acid(CA)as a crosslinker between the carboxymethyl cellulose(CMC)and the poly(3,4-ethylenedioxythiophene)poly-(styrene-4-sulfonate)(PEDOT:PSS)to stabilize Si anode.By adjusting the crosslinking density,the binder can achieve a balance between rigidity and flexibility to adapt the volume expansion upon lithiation and reversible volume recovery after delithiation of Si.Therefore,Si/CMC-CA-PEDOT:PSS(Si/CCP)electrode demonstrates an excellent performance with high capacities of 2792.3 mAh g^(-1) at 0.5 A g^(-1) and a high area capacity above 2.6 mAh cm^(-2) under Si loading of 1.38 mg cm^(-2).The full cell Si/CCP paired with Li(Ni_(0.8)Co_(0.1)Mn_(0.1))O_(2) cathode discharges a capacity of 199.0 mAh g^(-1) with 84.3%ICE at 0.1 C and the capacity retention of 95.6%after 100 cycles.This work validates the effectiveness of 3D polymer binder and provides new insights to boost the performance of Si anode.
基金supported by the Major Science and Technology Projects in Yunnan Province(Grant No.202402AF080005)National Natural Science Foundation of China(Grant Nos.52274408,22468029,52274412)+2 种基金Yunnan Fundamental Research Projects(Grant No.202201AW070014)the Program for Innovative Research Team in University of Ministry of Education of China(Grant No.IRT 17R48)the German Research Foundation(DFG,Project number 501766751).
文摘While silicon/carbon(Si/C)is considered one of the most promising anode materials for the next generation of high-energy lithium-ion batteries(LIBs),the industrialization of Si/C anodes is hampered by high-cost and low product yield.Herein,a high-yield strategy is developed in which photovoltaic waste silicon is converted to cost-effective graphitic Si/C composites(G-Si@C)for LIBs.The introduction of a binder improves the dispersion and compatibility of silicon and graphite,enhances particle sphericity,and significantly reduces the loss rate of the spray prilling process(from about 25%to 5%).As an LIB anode,the fabricated G-Si@C composites exhibit a capacity of 605 mAh g^(-1) after 1200 cycles.The cost of manufacturing Si/C anode materials has been reduced to approximately$7.47 kg^(-1),which is close to that of commercial graphite anode materials($5.0 kg^(-1)),and significantly lower than commercial Si/C materials(ca.$20.74 kg^(-1)).Moreover,the G-Si@C material provides approximately 81.0 Ah/$of capacity,which exceeds the current best commercial graphite anodes(70.0 Ah/$)and Si/C anodes(48.2 Ah/$).The successful implementation of this pathway will significantly promote the industrialization of high-energydensity Si/C anode materials.
基金supported by the Jiangyin-SUSTech Innovation Fundthe National Natural Science Foundation of China (No. 22309078 and 52302261)+3 种基金the Shenzhen Key Laboratory of Advanced Energy Storage (ZDSYS20220401141000001)the Shenzhen Science and Technology Plan Project(No. SGDX20230116091644003)the Guangdong Basic and Applied Basic Research Foundation (2023B1515120069)the Pico Center at SUSTech Core Research Facilities,which is supported by the Presidential Fund and the Development and Reform Commission of Shenzhen Municipality
文摘There is an urgent need to develop high-areal-capacity silicon(Si)anodes with good cycling stability and rate capability for high-energy-density lithium-ion batteries(LIBs).However,this remains a huge challenge due to large volume expansion-induced mechanical degradation and electrical connectivity loss in thick electrodes.Here,a three-in-one strategy is proposed to achieve high-areal-capacity silicon anodes by constructing a multi-level interconnected 3D porous and robust conductive network that carbon nanofibers and vertical carbon nanosheets tightly encapsulate on the surface of Si nanoparticles(Si NPs)anchored in porous carbon felts.This network accommodates large volume expansion of Si NPs to significantly improve electrode mechanical stability and creates excellent electrical connectivity to boost charge transport in thick electrodes,revealed through Multiphysics field simulations and in situ electrochemical techniques.Therefore,the designed Si anodes achieve superior long-term stability with a capacity of 8.13 mAh cm^(-2)after 500 cycles and an ultrahigh areal capacity of 45.8 mAh cm^(-2).In particular,Ah-level pouch cells demonstrate an impressive capacity retention of 79.34%after 500 cycles at 1 C.Our study offers novel insights and directions for understanding and optimizing high-areal-capacity silicon-carbon composite anodes.
基金supported by the Nanxun Scholars Program for Young Scholars of ZJWEU(No.RC2023021315)the start-up funding for Scientific Research for High-level Talents(No.88106324004)the National Natural Science Foundation of China(No.62304070).
文摘Silicon-based materials are considered as the next generation anode to replace graphite due to their low cost and ultra-high theoretical capacity.However,significant volume expansion and contraction occur during charging and discharging processes,leading to the instability of electrode structure and susceptibility to peeling and damage,limiting its application.Constructing controllable molecular artificial solid electrolyte interphase(CMASEI)is an effective approach to address the commercialization of silicon-based anode materials[1].Improving the performance of silicon-based anodes through CMASEI is a multifaceted outcome.
基金financially supported by the National Natural Science Foundation of China (No. 51404030)the National Key Technologies Research and Development Program (No. 2016YFB0100400)+2 种基金the Natural Science Foundation of Beijing Municipality (No. 3154043)the Beijing Science and Technology Plan (No. Z151100000115015)the Beijing Nova Program (No. Z161100004916096)
文摘In this work, a scalable and cost-effective method including mechanical milling, centrifugation and spray drying was developed to fabricate Si nanoparticles.The synthesized Si nanoparticles show an average size of 62 nm and exhibit a narrow particle size distribution. The influence of particle sizes on electrochemical performance of Si-based electrode was investigated, and it is found that as the particle size decreases in the studied range, the Si particles show a lower specific capacity and a higher irreversible capacity loss(ICL). Furthermore, an oxide layer with thickness of ～3 nm was detected on the surface of the as-received Si nanoparticles, and this layer can be effectively removed by hydrofluoric acid(HF) etching,resulting in much improved electrochemical performance over the as-received samples.
基金financially supported by the National Natural Science Foundation of China (No. 51404032)the National High Technology Research and Development Program of China(No. 2013AA050904)
文摘Polymer binder plays a pivotal role in electrochemical performance of high-capacity silicon(Si)anode that usually suffers from severe capacity fading due to enormous substantial volume change of Si during cycling.In an effort to find efficient polymer binder that could mitigate such capacity fading,alginate-carboxymethyl chitosan(Alg-C-chitosan)composite polymer was investigated as a low-cost watersoluble binder for silicon anodes in lithium-ion batteries.The electrostatic interaction between carboxylate(-COO-)of Alg and protonated amines(-NH3+)of C-chitosan forms a selfhealing porous scaffold structure.Synergistic effect on the enhanced porous scaffold structure and self-healing electrostatic interaction of Alg-C-chitosan binder effectively can tolerate the tremendous volume change of Si and maintain an integrated electrode structure during cycling process.The Si nanopowder electrodes with Alg-C-chitosan composite binder exhibit an excellent cycling stability,with a capacity of750 mAh·g-1 remaining after 100 th cycling.In addition,an extraordinary areal capacity of 3.76 mAh·cm-2 is achieved for Si-based anodes with Alg-C-chitosan binder.
文摘Silicon （Si） has been considered as one of the most promising anode material for tHe next generation lithium-ion batteries （LIBs） with high energy densities, due to its high theoretical capacity, abundant availability and environmental friendliness. However. silicon materials with low intrinsic electric and ionic conductivity suffer from huge volume variation during lithiation/delithiation processes leading to the pulverization of Si and subsequently resulting in severe capacity fading of the electrodes. Coupling of Si with carbon （C） realizes a favorable combination of the two materials properties, such as high lithiation capacity of Si and excellent mechanical and conductive properties of C. making silicon/carbon composite （Si/C） ideal candidates for LIBs anodes. In this review, recent progresses of Si/C materials utilized in LIBs are summarized in terms of structural design principles, material synthesis methods, morphological characteristics and electrochemical performances by highlighting the material structures. The mechanisms behind the performance enhancement are also discussed. Moreover, other factors that affect the performance of Si/C anodes, such as prelithiation, electrolyte additives, and binders, are also discussed. We aim to present a full scope of the Si/C-based anodes, and help understand and design future structures of Si/C anodes in LIBs,
基金supported by the National Natural Science Foundation of China(No.51602250)Thousand Youth Talents Plan Project of China
文摘Silicon anodes have drawn ever-increasing attention in lithium-ion batteries(LIBs) owing to their extremely high theoretical capacity and abundance in the earth. Despite promising advantages, the wide use of silicon anodes in LIBs is highly hindered by their fast capacity fading and low Coulombic efficiency arising from their substantial volumetric variation(>300%). Herein, we report a novel aqueous hybrid gel binder for silicon anodes via crosslinking sodium carboxymethyl cellulose(NaCMC) by an inorganic crosslinker-sodium borate. Not only this gel polymer binder can chemically bond to silicon nanoparticle, but also the deformable framework of this crosslinked binder is capable of maintaining electrode integrity, thus buffering dramatic volume change of silicon. Consequently, the silicon anode with this gel binder exhibits good cycle life(1211.5 mAh/g after 600 cycles) and high initial Coulombic efficiency(88.95%).
基金financially supported by the National Natural Science Foundation of China (Nos. 51004016 and 51004017)the National High Technology Research and Development Program of China (Nos.2012AA110102 and 2011AA11A269)
文摘Silicon has been investigated extensively as a promising anode material for rechargeable lithium-ion bat- teries. Understanding the failure mechanism of silicon-based anode electrodes for lithium-ion batteries is essential to solve the problem of low coulombic efficiency and capacity fading on cycling and also to further commercialize this very new energetic material in cells. To reach this goal, the structure changes of bulk silicon particles and electrode after cycling were studied using ex-situ scanning electron microscopy （SEM） and X-ray diffraction （XRD） techniques. The SEM images indicated that the microstructural changes of the bulk silicon particles during cycling led to a layer rupture of the electrode and then the breakdown of the conductive network and the failure of the electrode. The result contributes to the basic understanding of the failure mechanism of a bulk sil- icon anode electrode for lithium-ion batteries.
基金supported by the National Natural Science Foundation of China (No.51004016)
文摘Silicon has been investigated intensively as a promising anode material for rechargeable lithium-ion batteries. The choice of a binder is very important to solve the problem of the large capacity fade observed along cycling. The effect of modified elastomeric binders on the electrochemical performance of crystalline nano-silicon powders was studied. Compared with the conventional binder （polyvinylidene fluoride （PVDF））, Si electrodes using the elastomeric styrene butadiene rubber （SBR） and sodium carboxymethyl cellulose （SCMC） com- bined binder show an improved cycling performance. The reversible capacity of the Si electrode with the SCMC/SBR binder is as high as 2221 mA.h/g for 30 cycles in a voltage window between 0.005 and 2 V. The structure changes from SEM images of the silicon electrodes with different binders were used to explore the property improvement.
