Based on the pressure regulation circuit adopting electro-hydraulic proportional relief valve to control tension, a new type of electro-hydraulic compound control circuit with throttle control unit is presented, which...Based on the pressure regulation circuit adopting electro-hydraulic proportional relief valve to control tension, a new type of electro-hydraulic compound control circuit with throttle control unit is presented, which can obtain optimal dynamic damping ratio through real-time altering pressure-flow gain of the throttle control unit, improve the dynamic characteristic of tension follow-up control for the tension system with high inertia loads. Moreover, the characteristic when the cable linear velocity variation causes change of tension is investigated, and a compound control strategy is proposed. The theoretical analysis and experimental results show that the electro-hydraulic compound control circuit is effective and the characteristic of the compound control strategy is satisfactory.展开更多
At the altitude,hypoxia and training load are key factors in the development of oxidative stress.Altitude-induced oxidative stress is developed due to the depletion of antioxidant potential.In the current study,we exa...At the altitude,hypoxia and training load are key factors in the development of oxidative stress.Altitude-induced oxidative stress is developed due to the depletion of antioxidant potential.In the current study,we examined the non-enzymatic antioxidant profile of blood plasma in 7 males and 5 females specializing in speed skating at a 21-day training camp at 1850m above sea level.Training included:cycling,roller skating,ice skating,strength training,and special training.At the start point and the endpoint,total hemoglobin mass(tHb-mass),hemoglobin concentration,and circulating blood volume were determined.Antioxidant profiles,hypoxic doses,hypoxic impulses,and training impulses were assessed at 3,6,10,14,and 18 days.Antioxidant profiles consisting of“urate”and“thiol”parts were registered with chemiluminometry.In the training dynamics,antioxidant parameters changed individually,but in total there was a decrease in the“urate”capacity by a factor of 1.6(p=0.001)and an increase in the“thiol”capacity by a factor of 1.8(p=0.013).The changes in“urate”capacity positively correlated(r_(S)=0.40)and the changes in“thiol”capacity negatively correlated(r_(S)=−0.45)with changes in tHb-mass.Both exercise and hypoxic factors affect the antioxidant parameters bidirectionally.They correlated with a decrease in thiol capacity and with an increase in urate capacity.The assessment of the non-enzymatic antioxidant profile can be a simple and useful addition to screening the reactive oxygen species homeostasis and can help choose the personalized training schedule,individualize recovery and ergogenic support.展开更多
The current single-atom catalysts(SACs)for medicine still suffer from the limited active site density.Here,we develop a synthetic method capable of increasing both the metal loading and mass-specific activity of SACs ...The current single-atom catalysts(SACs)for medicine still suffer from the limited active site density.Here,we develop a synthetic method capable of increasing both the metal loading and mass-specific activity of SACs by exchanging zinc with iron.The constructed iron SACs(h^(3)-FNC)with a high metal loading of 6.27 wt%and an optimized adjacent Fe distance of~4 A exhibit excellent oxidase-like catalytic performance without significant activity decay after being stored for six months and promising antibacterial effects.Attractively,a“density effect”has been found at a high-enough metal doping amount,at which individual active sites become close enough to interact with each other and alter the electronic structure,resulting in significantly boosted intrinsic activity of single-atomic iron sites in h^(3)-FNCs by 2.3 times compared to low-and medium-loading SACs.Consequently,the overall catalytic activity of h^(3)-FNC is highly improved,with mass activity and metal mass-specific activity that are,respectively,66 and 315 times higher than those of commercial Pt/C.In addition,h^(3)-FNCs demonstrate efficiently enhanced capability in catalyzing oxygen reduction into superoxide anion(O_(2)·^(−))and glutathione(GSH)depletion.Both in vitro and in vivo assays demonstrate the superior antibacterial efficacy of h^(3)-FNCs in promoting wound healing.This work presents an intriguing activity-enhancement effect in catalysts and exhibits impressive therapeutic efficacy in combating bacterial infections.展开更多
The research on metal dimer clusters is of great importance,owing to the potential in modulating the adsorption behavior towards reaction intermediates.Here,we develop a loading heightening strategy to obtain a 32.5wt...The research on metal dimer clusters is of great importance,owing to the potential in modulating the adsorption behavior towards reaction intermediates.Here,we develop a loading heightening strategy to obtain a 32.5wt%Fe-dimer catalyst(Fe-32.5).The co-anchoring of two Fe atoms in a single triazine ring of carbon nitride with an atomic spacing of∼0.23nm is proved.Fe atoms occupy the pores of the triazine ring in the lower iron content sample(Fe-12.9 and Fe-17.1).However,with the increase of iron content to 32.5wt%,two Fe atoms simultaneously occupy one triazine ring.For Fe-32.5,besides the main peak located at∼1.5Åcorresponding to the Fe–N interaction,a peak attributed to Fe–Fe bonding is observed at∼2.2Åin Fourier-transformed k3-weithted extended X-ray absorption fine structure.Density functional theoretical calculations reveal that Fe-dimer in Fe-32.5 induces a charge redistribution compared with that in Fe-12.9 and Fe-17.1.H_(2)O^(∗)is adsorbed on O^(∗)via hydrogen bonding in Fe-12.9 and Fe-17.1.However,H_(2)O^(∗)and O^(∗)in Fe-32.5 are adsorbed on Fe–Fe dimer,resulting in a decrease in the total energy of the reaction process.For the two former,O_(2)^(-)∗adsorbs on individual Fe atoms.Fe-dimer in Fe-32.5 adsorbs O_(2)^(-)∗in the form of bridge bonds,which facilitates the·O_(2)^(-)release.Furthermore,an enhanced affinity for the substrate 3,3′,5,5′-tetramethylbenzidine and higher peroxidase-like activity were displayed.This work provides an effective mean to synthesize metal dimer clusters through high loading.展开更多
To address the inherent trade-off between mechanical strength and repair efficiency in conventional microcapsule-based self-healing technologies,this study presents an eggshell-inspired approach for fabricating high-l...To address the inherent trade-off between mechanical strength and repair efficiency in conventional microcapsule-based self-healing technologies,this study presents an eggshell-inspired approach for fabricating high-load rigid porous microcapsules(HLRPMs)through subcritical water etching.By optimizing the subcritical water treatment parameters(OH−concentration:0.031 mol/L,tem-perature:240°C,duration:1.5 h),nanoscale through-holes were generated on hollow glass microspheres(shell thickness≈700 nm).The subsequent gradient pressure infiltration of flaxseed oil enabled a record-high core content of 88.2%.Systematic investigations demonstrated that incorporating 3 wt%HLRPMs into epoxy resin composites preserved excellent dielectric properties(breakdown strength≥30 kV/mm)and enhanced tensile strength by 7.52%.In addressing multimodal damage,the system achieved a 95.5%filling efficiency for mechanical scratches,a 97.0%reduction in frictional damage depth,and a 96.2%recovery of insulation following electrical treeing.This biomimetic microcapsule system concurrently improved self-healing capability and matrix performance,offering a promising strategy for the development of next-generation smart insulating materials.展开更多
Rechargeable aqueous aluminum ion batteries(AIBs)are inspiring researchers’enthusiasm due to the low cost and high theoretical capacity of aluminum.Polyaniline(PANI)materials have the potential for aluminum ion stora...Rechargeable aqueous aluminum ion batteries(AIBs)are inspiring researchers’enthusiasm due to the low cost and high theoretical capacity of aluminum.Polyaniline(PANI)materials have the potential for aluminum ion storage due to the properties of its excellent conductivity and inherent theoretical capacity.However,the poor cycling stability and low loadings of PANI limit its application in energy storage.In this study,PANI-x electrodes with high mass loadings are successfully prepared by the electrodeposition method for reversible AlCl_(2)^(+)storage.Among them,the PANI-2 electrode possesses the highest areal capacity(0.59 and 0.51 mAh cm^(−2)at the current density of 0.5 and 10 mA cm^(−2))and excellent cycling stability in saturated AlCl3.Ex situ N 1s fitting spectra of PANI-2 and molecular dynamics simulations of 1 M,3 M,and saturated AlCl_(3)electrolytes demonstrate that PANI can achieve reversible redox reactions in saturated AlCl3,thereby achieving its excellent stability.Density functional theory calculations and ex situ spectra characterizations of PANI-2 demonstrate the insertion/de-insertion mechanism in the form of AlCl_(2)^(+)ions.In conclusion,PANI-2|Saturated AlCl_(3)|EG(exfoliated graphite foil)full cell is assembled successfully.This work provides promising guidance for the preparation of high-loading electrodes for AIBs.展开更多
Current fatigue damage analysis of various components(e.g.aircraft parts)focuses on effects of High-Cycle-Fatigue(HCF)loads while overlooking effects of Very-High-Cycle-Fatigue(VHCF)loads,thereby introducing a substan...Current fatigue damage analysis of various components(e.g.aircraft parts)focuses on effects of High-Cycle-Fatigue(HCF)loads while overlooking effects of Very-High-Cycle-Fatigue(VHCF)loads,thereby introducing a substantial bias.The crux of decreasing this bias lies in how to reasonably consider the threshold effect and nonlinear effect of VHCF loads'fatigue damage evolution.This problem is addressed in this paper from the perspective of Residual Fatigue Quality(RFQ,represent residual S-N^(*)curve and residual fatigue limitσ_(-1)^(*)).Fatigue tests were conducted on AA2024-T4 under various constant/variable-amplitude loads to reveal the evolution characteristics of RFQ and measure the equivalent fatigue damage of VHCF loads block loaded with various number of pre-loading HCF loads.Corresponding mechanisms were analysed in view of evolution of extrusions/intrusions along persistent slip bands.Theoretical analysis was conducted to reveal the relationship between RFQ and fatigue damage of VHCF loads block.Based on the above results,an isodamage curve-based fatigue damage analysis method was proposed,where bilinear-isodamage curves(consist of S-N^(*)curves intersecting at a point and corresponding_(σ-1)^(*))were adopted to consider the RFQ degeneration and its effect.This method reduces analysis bias to 1/3 of previous methods for typical variable-amplitude loads in HCF and HCF-VHCF regime.展开更多
High-entropy oxides(HEOs)have sparked scientific interest recently as a potential material technology for lithium-sulfur(Li–S)batteries.This interest stems from their simultaneous roles as sulfur hosts and electrocat...High-entropy oxides(HEOs)have sparked scientific interest recently as a potential material technology for lithium-sulfur(Li–S)batteries.This interest stems from their simultaneous roles as sulfur hosts and electrocatalysts,which provide enhancements to the performance of sulfur cathode composites.Nonetheless,their incorporation into the active material blend results in compromised energy density,particularly when their gravimetric proportion is substantial(≥10 wt.%,in the sulfur-based cathode).展开更多
Aqueous zinc ion batteries(AZIBs)have emerged as a promising energy storage technology due to their high safety and low cost.However,the practical application of AZIBs is severely hindered by unstable Zn anodes especi...Aqueous zinc ion batteries(AZIBs)have emerged as a promising energy storage technology due to their high safety and low cost.However,the practical application of AZIBs is severely hindered by unstable Zn anodes especially under high depth of discharge(DOD).This study proposes an in-situ interface alloying engineering based on Ce^(3+)additive to regulate Zn deposition behaviors,significantly enhancing the cycling stability and reversibility of Zn anodes.Ce^(3+)undergoes in-situ formation of ZnCe alloy on Zn anode interface,inducing preferential deposition of dense Zn(002)plane and effectively mitigating concentration polarization.Zn//Zn symmetric cells with Ce^(3+)electrolytes achieve stable cycling for 3000h at 1mAcm^(−2)and deliver a cumulative capacity of 27 Ah cm^(−2)(5400h)at a high current density of 5mAcm^(−2).Even under a high DOD of 68.4%,it maintains stable cycling for 420h.Full cells with a low Negative/Positive capacity(N/P)ratio of 4.30 and high cathode loading of 10mgcm^(−2)can stably cycle over 1000 cycles at 2Ag^(−1).Furthermore,an 80mAh-level pouch cell with N/P ratio of 4.68 retains 85%capacity after 100 cycles.This article provides new insights into the interfacial engineering for practical AZIBs.展开更多
Recent advances in additive manufacturing have enabled the construction of metallic lattice structures with tailored mechanical and functional properties.One potential application of metallic lattice struc-tures is in...Recent advances in additive manufacturing have enabled the construction of metallic lattice structures with tailored mechanical and functional properties.One potential application of metallic lattice struc-tures is in the impact load mitigation where an external kinetic energy is absorbed by the deformation/crushing of lattice cells.This has motivated a growing number of experimental and numerical studies,recently,on the crushing behavior of additively produced lattice structures.The present study overviews the dynamic and quasi-static crushing behavior of additively produced Ti64,316L,and AlSiMg alloy lattice structures.The first part of the study summarizes the main features of two most commonly used additive processing techniques for lattice structures,namely selective-laser-melt(SLM)and electro-beam-melt(EBM),along with a description of commonly observed process induced defects.In the second part,the deformation and strain rate sensitivities of the selected alloy lattices are outlined together with the most widely used dynamic test methods,followed by a part on the observed micro-structures of the SLM and EBM-processed Ti64,316L and AlSiMg alloys.Finally,the experimental and numerical studies on the quasi-static and dynamic compression behavior of the additively processed Ti64,316L,and AlSiMg alloy lattices are reviewed.The results of the experimental and numerical studies of the dynamic properties of various types of lattices,including graded,non-uniform strut size,hollow,non-uniform cell size,and bio-inspired,were tabulated together with the used dynamic testing methods.The dynamic tests have been noted to be mostly conducted in compression Split Hopkinson Pressure Bar(SHPB)or Taylor-and direct-impact tests using the SHPB set-up,in all of which relatively small-size test specimens were tested.The test specimen size effect on the compression behavior of the lattices was further emphasized.It has also been shown that the lattices of Ti64 and AlSiMg alloys are relatively brittle as compared with the lattices of 316L alloy.Finally,the challenges associated with modelling lattice structures were explained and the micro tension tests and multi-scale modeling techniques combining microstructural characteristics with macroscopic lattice dynamics were recommended to improve the accuracy of the numerical simulations of the dynamic compression deformations of metallic lattice structures.展开更多
This article experimentally studies the effects of air injection near the blade trailing edge on flow separation and losses in a highly loaded linear compressor cascade. Aerodynamic parameters of eight cascades with d...This article experimentally studies the effects of air injection near the blade trailing edge on flow separation and losses in a highly loaded linear compressor cascade. Aerodynamic parameters of eight cascades with different air injection slot configura- tions are measured by using a five-hole probe at the cascade outlets. Ink-trace flow visualization is performed to obtain the flow details around the air injection slots. The static pressure distribution is clarified with pressure taps on the endwalls. The...展开更多
It is confirmed that tandem-blade configurations have potential to enlarge the flow turning in two-dimension(2D) studies. However, the potential of tandem blades to enlarge the design space for highly loaded axial com...It is confirmed that tandem-blade configurations have potential to enlarge the flow turning in two-dimension(2D) studies. However, the potential of tandem blades to enlarge the design space for highly loaded axial compressors was rarely investigated in open literatures. The present work aims to show the capability of tandem blades to break the loading limit of conventional blades for highly loaded compressors. The 2D models of the maximum static pressure rise derived in previous work were validated by a large amount experimental data, which showed a good agreement. An E parameter was defined to evaluate the stall margin of compressor based on the theoretical models, which indicated that the tandem blade was able to increase the loading limit of axial compressors. A single-blade stage with a loading coefficient of 0.46(based on the blade tip rotating speed) was designed as the baseline case under the guidance of the E parameter. A tandem-blade stage was then designed by ensuring that the velocity triangles were similar to the single-blade stage. The performances of both stages were investigated experimentally. The results showed that the maximum efficiency of the tandem-blade stage was 92.8%, 1% higher than the single;the stall margin increased from 16.9% to 22.3%. Besides, the maximum pressure rise of tandem rotors was beyond the loading limit of 2D single-blade cascades, which confirmed the potential of tandem blades to break the loading limit of axial compressors.展开更多
Lithium sulfur(Li-S)batteries are the promising power sources,but their commercialization is significantly impeded by poor energy-storage functions at high sulfur loading.Here we report that such an issue can be effec...Lithium sulfur(Li-S)batteries are the promising power sources,but their commercialization is significantly impeded by poor energy-storage functions at high sulfur loading.Here we report that such an issue can be effectively addressed by using a mussel-inspired binder comprised of chitosan grafted with catecholic moiety for sulfur cathodes.The resulting sulfur cathodes possess a high loading up to 12.2 mg cm-2 but also exhibit one of the best electrochemical properties among their counterparts.The excellent performances are attributed to the strong adhesion of the binder to sulfur particles,conducting agent,current collector,and polysulfide.The versatile adhesion effectively increases the sulfur loading,depresses the shuttle effect,and alleviates mechanical pulverization during cycling processes.The present investigation offers a new insight into high performance sulfur cathodes through a bio-adhesion viewpoint.展开更多
Silicon monoxide(SiO)is an attractive anode material for next-generation lithium-ion batteries for its ultra-high theoretical capacity of 2680 mAh g−1.The studies to date have been limited to electrodes with a rela-ti...Silicon monoxide(SiO)is an attractive anode material for next-generation lithium-ion batteries for its ultra-high theoretical capacity of 2680 mAh g−1.The studies to date have been limited to electrodes with a rela-tively low mass loading(<3.5 mg cm^(−2)),which has seriously restricted the areal capacity and its potential in practical devices.Maximizing areal capacity with such high-capacity materials is critical for capitalizing their potential in practi-cal technologies.Herein,we report a monolithic three-dimensional(3D)large-sheet holey gra-phene framework/SiO(LHGF/SiO)composite for high-mass-loading electrode.By specifically using large-sheet holey graphene building blocks,we construct LHGF with super-elasticity and exceptional mechanical robustness,which is essential for accommodating the large volume change of SiO and ensuring the structure integrity even at ultrahigh mass loading.Additionally,the 3D porous graphene network structure in LHGF ensures excellent electron and ion transport.By systematically tailoring microstructure design,we show the LHGF/SiO anode with a mass loading of 44 mg cm^(−2)delivers a high areal capacity of 35.4 mAh cm^(−2)at a current of 8.8 mA cm^(−2)and retains a capacity of 10.6 mAh cm^(−2)at 17.6 mA cm^(−2),greatly exceeding those of the state-of-the-art commercial or research devices.Furthermore,we show an LHGF/SiO anode with an ultra-high mass loading of 94 mg cm^(−2)delivers an unprecedented areal capacity up to 140.8 mAh cm^(−2).The achievement of such high areal capacities marks a critical step toward realizing the full potential of high-capacity alloy-type electrode materials in practical lithium-ion batteries.展开更多
Lithium-sulfur(Li-S)battery is regarded as one of the most promising next-generation energy storage systems due to the ultra-high theoretical energy density of 2600 Wh kg^(-1).To address the insulation nature of sulfu...Lithium-sulfur(Li-S)battery is regarded as one of the most promising next-generation energy storage systems due to the ultra-high theoretical energy density of 2600 Wh kg^(-1).To address the insulation nature of sulfur,nanocarbon composition is essential to afford acceptable cycling capacity but inevitably sacrifices the actual energy density under working conditions.Therefore,rational structural design of the carbon/sulfur composite cathode is of great significance to realize satisfactory electrochemical performances with limited carbon content.Herein,the cathode carbon distribution is rationally regulated to construct high-sulfur-content and high-performance Li-S batteries.Concretely,a double-layer carbon(DLC)cathode is prepared by fabricating a surface carbon layer on the carbon/sulfur composite.The surface carbon layer not only provides more electrochemically active surfaces,but also blocks the polysulfide shuttle.Consequently,the DLC configuration with an increased sulfur content by nearly 10 wt%renders an initial areal capacity of 3.40 mAh cm^(-2) and capacity retention of 83.8%during 50 cycles,which is about two times than that of the low-sulfur-content cathode.The strategy of carbon distribution regulation affords an effective pathway to construct advanced high-sulfur-content cathodes for practical high-energy-density Li-S batteries.展开更多
Lithium–sulfur(Li–S)batteries have been recognized as promising substitutes for current energy-storage technologies owing to their exceptional advantages in very high-energy density and excellent material sustainabi...Lithium–sulfur(Li–S)batteries have been recognized as promising substitutes for current energy-storage technologies owing to their exceptional advantages in very high-energy density and excellent material sustainability.The cathode with high sulfur areal loading is vital for the practical applications of Li–S batteries with very high energy density.However,the high sulfur loading in an electrode results in poor rate and cycling performances of batteries in most cases.Herein,we used diameters of 5.0(D5)and 13.0(D13)mm to probe the effect of electrodes with different sizes on the rate and cycling performances under a high sulfur loading(4.5 mg cm^-2).The cell with D5 sulfur cathode exhibits better rate and cycling performances comparing with a large(D13)cathode.Both the high concentration of lithium polysulfides and corrosion of lithium metal anode impede rapid kinetics of sulfur redox reactions,which results in inferior battery performance of the Li–S cell with large diameter cathode.This work highlights the importance of rational matching of the large sulfur cathode with a high areal sulfur loading,carbon modified separators,organic electrolyte,and Li metal anode in a pouch cell,wherein the sulfur redox kinetics and lithium metal protection should be carefully considered under the flooded lithium polysulfide conditions in a working Li–S battery.展开更多
By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) ...By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band(ASB) at low compression strain, while bimodal alloy is considerably ASBresistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB.In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary a grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of a lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of a/β nanomultilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.展开更多
The lithium-sulfur battery is the subject of much recent attention due to the high theoretical energy density,but practical applications are challenged by fast decay owing to polysulfide shuttle and electrode architec...The lithium-sulfur battery is the subject of much recent attention due to the high theoretical energy density,but practical applications are challenged by fast decay owing to polysulfide shuttle and electrode architecture degradation.A comprehensive study of the sulfur host microstructure design and the cell architecture construction based on the MXene phase(Ti3C2Tx nanosheets) is performed,aiming at realize stable cycling performance of Li-S battery with high sulfur areal loading.The interwoven KB@Ti3C2Tx composite formed by self-assembly of MXene and Ktej en black,not only provides superior conductivity and maintains the electrode integrality bearing the volume expansion/shrinkage when used as the sulfur host,but also functions as an interlayer on separator to further retard the polysulfide cross-diffusion that possibly escaped from the cathode.The KB@Ti3C2Tx interlayer is only 0.28 mg cm-2 in areal loading and 3 μm in thickness,which accounts a little contribution to the thick sulfur electrode;thus,the impacts on the energy density is minimal.By coupling the robust KB@Ti3C2Tx cathode and the effective KB@Ti3C2Tx modified separator,a stable Li-S battery with high sulfur areal loading(5.6 mg cm-2) and high areal capacity(6.4 mAh cm-2) at relatively lean electrolyte is achieved.展开更多
Three-dimensionally（3D） ordered mesoporous carbon sphere arrays（OMCS） are explored to support high loading（60 wt%） Pt nanoparticles as electrocatalysts for the methanol oxidation reaction（MOR）.The OMCS has a u...Three-dimensionally（3D） ordered mesoporous carbon sphere arrays（OMCS） are explored to support high loading（60 wt%） Pt nanoparticles as electrocatalysts for the methanol oxidation reaction（MOR）.The OMCS has a unique hierarchical nanostructure with ordered large mesopores and macropores that can facilitate high dispersion of the Pt nanoparticles and fast mass transport during the reactions. The prepared Pt/OMCS exhibits uniformly dispersed Pt nanoparticles with an average size of- 2.0 nm on the mesoporous walls of the carbon spheres. The Pt/OMCS catalyst shows significantly enhanced specific electrochemically active surface area（ECSA）（73.5 m^2g^-1） and electrocatalytic activity（0.69 mA cm^-2）for the MOR compared with the commercial 60 wt% Pt/C catalyst.展开更多
Realizing a lithium sulfide(Li_(2)S)cathode with both high energy density and a long lifespan requires an innovative cathode design that maximizes electrochemical performance and resists electrode deterioration.Herein...Realizing a lithium sulfide(Li_(2)S)cathode with both high energy density and a long lifespan requires an innovative cathode design that maximizes electrochemical performance and resists electrode deterioration.Herein,a high-loading Li_(2)S-based cathode with micrometric Li_(2)S particles composed of two-dimensional graphene(Gr)and one-dimensional carbon nanotubes(CNTs)in a compact geometry is developed,and the role of CNTs in stable cycling of high-capacity Li–S batteries is emphasized.In a dimensionally combined carbon matrix,CNTs embedded within the Gr sheets create robust and sustainable electron diffusion pathways while suppressing the passivation of the active carbon surface.As a unique point,during the first charging process,the proposed cathode is fully activated through the direct conversion of Li_(2)S into S_(8) without inducing lithium polysulfide formation.The direct conversion of Li_(2)S into S_(8) in the composite cathode is ubiquitously investigated using the combined study of in situ Raman spectroscopy,in situ optical microscopy,and cryogenic transmission electron microscopy.The composite cathode demonstrates unprecedented electrochemical properties even with a high Li_(2)S loading of 10 mg cm^(–2);in particular,the practical and safe Li–S full cell coupled with a graphite anode shows ultra-long-term cycling stability over 800 cycles.展开更多
基金This project is supported by National Natural Science Foundation of China (No.50475105).
文摘Based on the pressure regulation circuit adopting electro-hydraulic proportional relief valve to control tension, a new type of electro-hydraulic compound control circuit with throttle control unit is presented, which can obtain optimal dynamic damping ratio through real-time altering pressure-flow gain of the throttle control unit, improve the dynamic characteristic of tension follow-up control for the tension system with high inertia loads. Moreover, the characteristic when the cable linear velocity variation causes change of tension is investigated, and a compound control strategy is proposed. The theoretical analysis and experimental results show that the electro-hydraulic compound control circuit is effective and the characteristic of the compound control strategy is satisfactory.
文摘At the altitude,hypoxia and training load are key factors in the development of oxidative stress.Altitude-induced oxidative stress is developed due to the depletion of antioxidant potential.In the current study,we examined the non-enzymatic antioxidant profile of blood plasma in 7 males and 5 females specializing in speed skating at a 21-day training camp at 1850m above sea level.Training included:cycling,roller skating,ice skating,strength training,and special training.At the start point and the endpoint,total hemoglobin mass(tHb-mass),hemoglobin concentration,and circulating blood volume were determined.Antioxidant profiles,hypoxic doses,hypoxic impulses,and training impulses were assessed at 3,6,10,14,and 18 days.Antioxidant profiles consisting of“urate”and“thiol”parts were registered with chemiluminometry.In the training dynamics,antioxidant parameters changed individually,but in total there was a decrease in the“urate”capacity by a factor of 1.6(p=0.001)and an increase in the“thiol”capacity by a factor of 1.8(p=0.013).The changes in“urate”capacity positively correlated(r_(S)=0.40)and the changes in“thiol”capacity negatively correlated(r_(S)=−0.45)with changes in tHb-mass.Both exercise and hypoxic factors affect the antioxidant parameters bidirectionally.They correlated with a decrease in thiol capacity and with an increase in urate capacity.The assessment of the non-enzymatic antioxidant profile can be a simple and useful addition to screening the reactive oxygen species homeostasis and can help choose the personalized training schedule,individualize recovery and ergogenic support.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB3804500)the National Natural Science Foundation of China(Grant No.52202352,22335006)+4 种基金the Shanghai Municipal Health Commission(Grant No.20224Y0010)the CAMS Innovation Fund for Medical Sciences(Grant No.2021-I2M-5-012)the Basic Research Program of Shanghai Municipal Government(Grant No.21JC1406000)the Fundamental Research Funds for the Central Universities(Grant No.22120230237,2023-3-YB-11,22120220618)the Basic Research Program of Shanghai Municipal Government(23DX1900200).
文摘The current single-atom catalysts(SACs)for medicine still suffer from the limited active site density.Here,we develop a synthetic method capable of increasing both the metal loading and mass-specific activity of SACs by exchanging zinc with iron.The constructed iron SACs(h^(3)-FNC)with a high metal loading of 6.27 wt%and an optimized adjacent Fe distance of~4 A exhibit excellent oxidase-like catalytic performance without significant activity decay after being stored for six months and promising antibacterial effects.Attractively,a“density effect”has been found at a high-enough metal doping amount,at which individual active sites become close enough to interact with each other and alter the electronic structure,resulting in significantly boosted intrinsic activity of single-atomic iron sites in h^(3)-FNCs by 2.3 times compared to low-and medium-loading SACs.Consequently,the overall catalytic activity of h^(3)-FNC is highly improved,with mass activity and metal mass-specific activity that are,respectively,66 and 315 times higher than those of commercial Pt/C.In addition,h^(3)-FNCs demonstrate efficiently enhanced capability in catalyzing oxygen reduction into superoxide anion(O_(2)·^(−))and glutathione(GSH)depletion.Both in vitro and in vivo assays demonstrate the superior antibacterial efficacy of h^(3)-FNCs in promoting wound healing.This work presents an intriguing activity-enhancement effect in catalysts and exhibits impressive therapeutic efficacy in combating bacterial infections.
基金financially supported by National Natural Science Foundation of China(No.52301011)Hainan Provincial Natural Science Foundation of China(No.524QN226)the Opening Project of Key Laboratory of Optoelectronic Chemical Materials and Devices,Ministry of Education,Jianghan University(No.JDGD-202315).
文摘The research on metal dimer clusters is of great importance,owing to the potential in modulating the adsorption behavior towards reaction intermediates.Here,we develop a loading heightening strategy to obtain a 32.5wt%Fe-dimer catalyst(Fe-32.5).The co-anchoring of two Fe atoms in a single triazine ring of carbon nitride with an atomic spacing of∼0.23nm is proved.Fe atoms occupy the pores of the triazine ring in the lower iron content sample(Fe-12.9 and Fe-17.1).However,with the increase of iron content to 32.5wt%,two Fe atoms simultaneously occupy one triazine ring.For Fe-32.5,besides the main peak located at∼1.5Åcorresponding to the Fe–N interaction,a peak attributed to Fe–Fe bonding is observed at∼2.2Åin Fourier-transformed k3-weithted extended X-ray absorption fine structure.Density functional theoretical calculations reveal that Fe-dimer in Fe-32.5 induces a charge redistribution compared with that in Fe-12.9 and Fe-17.1.H_(2)O^(∗)is adsorbed on O^(∗)via hydrogen bonding in Fe-12.9 and Fe-17.1.However,H_(2)O^(∗)and O^(∗)in Fe-32.5 are adsorbed on Fe–Fe dimer,resulting in a decrease in the total energy of the reaction process.For the two former,O_(2)^(-)∗adsorbs on individual Fe atoms.Fe-dimer in Fe-32.5 adsorbs O_(2)^(-)∗in the form of bridge bonds,which facilitates the·O_(2)^(-)release.Furthermore,an enhanced affinity for the substrate 3,3′,5,5′-tetramethylbenzidine and higher peroxidase-like activity were displayed.This work provides an effective mean to synthesize metal dimer clusters through high loading.
基金supported by the National Natural Science Foundation of China(Nos.52377133 and 52077014)the Youth Talent Support Program of Chongqing(CQYC2021058945)the General Program of the Natural Science Foundation of Chongqing Municipality(CSTB2022NSCQ-MSX0444).
文摘To address the inherent trade-off between mechanical strength and repair efficiency in conventional microcapsule-based self-healing technologies,this study presents an eggshell-inspired approach for fabricating high-load rigid porous microcapsules(HLRPMs)through subcritical water etching.By optimizing the subcritical water treatment parameters(OH−concentration:0.031 mol/L,tem-perature:240°C,duration:1.5 h),nanoscale through-holes were generated on hollow glass microspheres(shell thickness≈700 nm).The subsequent gradient pressure infiltration of flaxseed oil enabled a record-high core content of 88.2%.Systematic investigations demonstrated that incorporating 3 wt%HLRPMs into epoxy resin composites preserved excellent dielectric properties(breakdown strength≥30 kV/mm)and enhanced tensile strength by 7.52%.In addressing multimodal damage,the system achieved a 95.5%filling efficiency for mechanical scratches,a 97.0%reduction in frictional damage depth,and a 96.2%recovery of insulation following electrical treeing.This biomimetic microcapsule system concurrently improved self-healing capability and matrix performance,offering a promising strategy for the development of next-generation smart insulating materials.
基金supported by the National Natural Science Foundation of China(Grant No.21906015)the Fundamental Research Funds for the Central Universities(Grant No.N2205006 and N2225013).
文摘Rechargeable aqueous aluminum ion batteries(AIBs)are inspiring researchers’enthusiasm due to the low cost and high theoretical capacity of aluminum.Polyaniline(PANI)materials have the potential for aluminum ion storage due to the properties of its excellent conductivity and inherent theoretical capacity.However,the poor cycling stability and low loadings of PANI limit its application in energy storage.In this study,PANI-x electrodes with high mass loadings are successfully prepared by the electrodeposition method for reversible AlCl_(2)^(+)storage.Among them,the PANI-2 electrode possesses the highest areal capacity(0.59 and 0.51 mAh cm^(−2)at the current density of 0.5 and 10 mA cm^(−2))and excellent cycling stability in saturated AlCl3.Ex situ N 1s fitting spectra of PANI-2 and molecular dynamics simulations of 1 M,3 M,and saturated AlCl_(3)electrolytes demonstrate that PANI can achieve reversible redox reactions in saturated AlCl3,thereby achieving its excellent stability.Density functional theory calculations and ex situ spectra characterizations of PANI-2 demonstrate the insertion/de-insertion mechanism in the form of AlCl_(2)^(+)ions.In conclusion,PANI-2|Saturated AlCl_(3)|EG(exfoliated graphite foil)full cell is assembled successfully.This work provides promising guidance for the preparation of high-loading electrodes for AIBs.
基金the support from National Key Laboratory of Strength and Structural Integrity independent research project“Failure law and fatigue life prediction method of Metal Materials based on Material property degradation”。
文摘Current fatigue damage analysis of various components(e.g.aircraft parts)focuses on effects of High-Cycle-Fatigue(HCF)loads while overlooking effects of Very-High-Cycle-Fatigue(VHCF)loads,thereby introducing a substantial bias.The crux of decreasing this bias lies in how to reasonably consider the threshold effect and nonlinear effect of VHCF loads'fatigue damage evolution.This problem is addressed in this paper from the perspective of Residual Fatigue Quality(RFQ,represent residual S-N^(*)curve and residual fatigue limitσ_(-1)^(*)).Fatigue tests were conducted on AA2024-T4 under various constant/variable-amplitude loads to reveal the evolution characteristics of RFQ and measure the equivalent fatigue damage of VHCF loads block loaded with various number of pre-loading HCF loads.Corresponding mechanisms were analysed in view of evolution of extrusions/intrusions along persistent slip bands.Theoretical analysis was conducted to reveal the relationship between RFQ and fatigue damage of VHCF loads block.Based on the above results,an isodamage curve-based fatigue damage analysis method was proposed,where bilinear-isodamage curves(consist of S-N^(*)curves intersecting at a point and corresponding_(σ-1)^(*))were adopted to consider the RFQ degeneration and its effect.This method reduces analysis bias to 1/3 of previous methods for typical variable-amplitude loads in HCF and HCF-VHCF regime.
基金financially supported by the National Natural Science Foundation of China(52372289 and 52102368)Guangdong Special Fund for Key Areas(20237DZX3042)+2 种基金State Key Laboratory of New Ceramic Materials Tsinghua University(No.KF202415)Shenzhen Stable Support Projectsupported by the Centre for Advances in Reliability and Safety(CAiRS)admitted under AIR@Inno HK Research Cluster and HK Poly U Postdoc Matching Fund Scheme(1-W28H)。
文摘High-entropy oxides(HEOs)have sparked scientific interest recently as a potential material technology for lithium-sulfur(Li–S)batteries.This interest stems from their simultaneous roles as sulfur hosts and electrocatalysts,which provide enhancements to the performance of sulfur cathode composites.Nonetheless,their incorporation into the active material blend results in compromised energy density,particularly when their gravimetric proportion is substantial(≥10 wt.%,in the sulfur-based cathode).
基金supported by the National Natural Science Foundation of China(Grant No.92472116)[G.F.]Central South University Innovation-Driven Research Program(Grant No.2023CXQD038)[G.F.]+1 种基金Songshan Lake Materials Laboratory Open Research Topics(Grant No.2023SLABFK05)[G.F.]supported by the High Performance Computing Center of Central South University.
文摘Aqueous zinc ion batteries(AZIBs)have emerged as a promising energy storage technology due to their high safety and low cost.However,the practical application of AZIBs is severely hindered by unstable Zn anodes especially under high depth of discharge(DOD).This study proposes an in-situ interface alloying engineering based on Ce^(3+)additive to regulate Zn deposition behaviors,significantly enhancing the cycling stability and reversibility of Zn anodes.Ce^(3+)undergoes in-situ formation of ZnCe alloy on Zn anode interface,inducing preferential deposition of dense Zn(002)plane and effectively mitigating concentration polarization.Zn//Zn symmetric cells with Ce^(3+)electrolytes achieve stable cycling for 3000h at 1mAcm^(−2)and deliver a cumulative capacity of 27 Ah cm^(−2)(5400h)at a high current density of 5mAcm^(−2).Even under a high DOD of 68.4%,it maintains stable cycling for 420h.Full cells with a low Negative/Positive capacity(N/P)ratio of 4.30 and high cathode loading of 10mgcm^(−2)can stably cycle over 1000 cycles at 2Ag^(−1).Furthermore,an 80mAh-level pouch cell with N/P ratio of 4.68 retains 85%capacity after 100 cycles.This article provides new insights into the interfacial engineering for practical AZIBs.
基金the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 101034425 for the project titled A2M2TECHThe Scientific and Technological Research Council of Türkiye (TUBITAK) with grant No 120C158 for the same A2M2TECH project under the TUBITAK's 2236/B program
文摘Recent advances in additive manufacturing have enabled the construction of metallic lattice structures with tailored mechanical and functional properties.One potential application of metallic lattice struc-tures is in the impact load mitigation where an external kinetic energy is absorbed by the deformation/crushing of lattice cells.This has motivated a growing number of experimental and numerical studies,recently,on the crushing behavior of additively produced lattice structures.The present study overviews the dynamic and quasi-static crushing behavior of additively produced Ti64,316L,and AlSiMg alloy lattice structures.The first part of the study summarizes the main features of two most commonly used additive processing techniques for lattice structures,namely selective-laser-melt(SLM)and electro-beam-melt(EBM),along with a description of commonly observed process induced defects.In the second part,the deformation and strain rate sensitivities of the selected alloy lattices are outlined together with the most widely used dynamic test methods,followed by a part on the observed micro-structures of the SLM and EBM-processed Ti64,316L and AlSiMg alloys.Finally,the experimental and numerical studies on the quasi-static and dynamic compression behavior of the additively processed Ti64,316L,and AlSiMg alloy lattices are reviewed.The results of the experimental and numerical studies of the dynamic properties of various types of lattices,including graded,non-uniform strut size,hollow,non-uniform cell size,and bio-inspired,were tabulated together with the used dynamic testing methods.The dynamic tests have been noted to be mostly conducted in compression Split Hopkinson Pressure Bar(SHPB)or Taylor-and direct-impact tests using the SHPB set-up,in all of which relatively small-size test specimens were tested.The test specimen size effect on the compression behavior of the lattices was further emphasized.It has also been shown that the lattices of Ti64 and AlSiMg alloys are relatively brittle as compared with the lattices of 316L alloy.Finally,the challenges associated with modelling lattice structures were explained and the micro tension tests and multi-scale modeling techniques combining microstructural characteristics with macroscopic lattice dynamics were recommended to improve the accuracy of the numerical simulations of the dynamic compression deformations of metallic lattice structures.
基金National Natural Science Foundation of China (50876023)Chinese Specialized Research Fund for the Doctoral Pro-gram of Higher Education (20060213007)National Basic Research Program of China (2007CB210100)
文摘This article experimentally studies the effects of air injection near the blade trailing edge on flow separation and losses in a highly loaded linear compressor cascade. Aerodynamic parameters of eight cascades with different air injection slot configura- tions are measured by using a five-hole probe at the cascade outlets. Ink-trace flow visualization is performed to obtain the flow details around the air injection slots. The static pressure distribution is clarified with pressure taps on the endwalls. The...
基金the support of National Natural Science Foundation of China(Nos.51806004 and 51790511)National Science and Technology Major Project,China(No.2017-Ⅱ-0001-0013)。
文摘It is confirmed that tandem-blade configurations have potential to enlarge the flow turning in two-dimension(2D) studies. However, the potential of tandem blades to enlarge the design space for highly loaded axial compressors was rarely investigated in open literatures. The present work aims to show the capability of tandem blades to break the loading limit of conventional blades for highly loaded compressors. The 2D models of the maximum static pressure rise derived in previous work were validated by a large amount experimental data, which showed a good agreement. An E parameter was defined to evaluate the stall margin of compressor based on the theoretical models, which indicated that the tandem blade was able to increase the loading limit of axial compressors. A single-blade stage with a loading coefficient of 0.46(based on the blade tip rotating speed) was designed as the baseline case under the guidance of the E parameter. A tandem-blade stage was then designed by ensuring that the velocity triangles were similar to the single-blade stage. The performances of both stages were investigated experimentally. The results showed that the maximum efficiency of the tandem-blade stage was 92.8%, 1% higher than the single;the stall margin increased from 16.9% to 22.3%. Besides, the maximum pressure rise of tandem rotors was beyond the loading limit of 2D single-blade cascades, which confirmed the potential of tandem blades to break the loading limit of axial compressors.
基金supported by the National Natural Science Foundation of China(51473041)the Foundation for Innovative Research Groups of the National Natural Science Foundation of China(51521003)+2 种基金China Postdoctoral Science Foundation(no.2017M621262)Fundamental Research Funds for the Central Universities(No.HIT.NSRIF.201831)Postdoctoral Foundation of Hei long Jiang Province(LBH-Z17065)。
文摘Lithium sulfur(Li-S)batteries are the promising power sources,but their commercialization is significantly impeded by poor energy-storage functions at high sulfur loading.Here we report that such an issue can be effectively addressed by using a mussel-inspired binder comprised of chitosan grafted with catecholic moiety for sulfur cathodes.The resulting sulfur cathodes possess a high loading up to 12.2 mg cm-2 but also exhibit one of the best electrochemical properties among their counterparts.The excellent performances are attributed to the strong adhesion of the binder to sulfur particles,conducting agent,current collector,and polysulfide.The versatile adhesion effectively increases the sulfur loading,depresses the shuttle effect,and alleviates mechanical pulverization during cycling processes.The present investigation offers a new insight into high performance sulfur cathodes through a bio-adhesion viewpoint.
基金support by the National Natural Science Foundation of China(Nos.52074113,22005091)the Fundamental Research Funds of the Central Universities(No.531107051048)+6 种基金the Changsha Municipal Natural Science Foundantion(Grant No.43184)the CITIC Metals Ningbo Energy Co.Ltd.(No.H202191380246)Xidong Duan acknowledges support by the National Natural Science Foundation of China(Nos.51991343,51991340,61804050 and 51872086)the Hunan Key Laboratory of Two-Dimensional Materials(No.2018TP1010)Junfei Liang acknowledges support by the National Natural Science Foundation of China(No.U1910208)the National Natural Science Foundation of Shanxi Province(No.201901D111137)Tao Wang acknowledges support by the National Natural Science Foundation of China(No.22005092).
文摘Silicon monoxide(SiO)is an attractive anode material for next-generation lithium-ion batteries for its ultra-high theoretical capacity of 2680 mAh g−1.The studies to date have been limited to electrodes with a rela-tively low mass loading(<3.5 mg cm^(−2)),which has seriously restricted the areal capacity and its potential in practical devices.Maximizing areal capacity with such high-capacity materials is critical for capitalizing their potential in practi-cal technologies.Herein,we report a monolithic three-dimensional(3D)large-sheet holey gra-phene framework/SiO(LHGF/SiO)composite for high-mass-loading electrode.By specifically using large-sheet holey graphene building blocks,we construct LHGF with super-elasticity and exceptional mechanical robustness,which is essential for accommodating the large volume change of SiO and ensuring the structure integrity even at ultrahigh mass loading.Additionally,the 3D porous graphene network structure in LHGF ensures excellent electron and ion transport.By systematically tailoring microstructure design,we show the LHGF/SiO anode with a mass loading of 44 mg cm^(−2)delivers a high areal capacity of 35.4 mAh cm^(−2)at a current of 8.8 mA cm^(−2)and retains a capacity of 10.6 mAh cm^(−2)at 17.6 mA cm^(−2),greatly exceeding those of the state-of-the-art commercial or research devices.Furthermore,we show an LHGF/SiO anode with an ultra-high mass loading of 94 mg cm^(−2)delivers an unprecedented areal capacity up to 140.8 mAh cm^(−2).The achievement of such high areal capacities marks a critical step toward realizing the full potential of high-capacity alloy-type electrode materials in practical lithium-ion batteries.
基金supported by Scientific and Technological Key Project of Shanxi Province(20191102003)National Key Research and Development Program(2016YFA0202500)+1 种基金the National Natural Science Foundation of China(21776019)Beijing Natural Science Foundation(L182021)。
文摘Lithium-sulfur(Li-S)battery is regarded as one of the most promising next-generation energy storage systems due to the ultra-high theoretical energy density of 2600 Wh kg^(-1).To address the insulation nature of sulfur,nanocarbon composition is essential to afford acceptable cycling capacity but inevitably sacrifices the actual energy density under working conditions.Therefore,rational structural design of the carbon/sulfur composite cathode is of great significance to realize satisfactory electrochemical performances with limited carbon content.Herein,the cathode carbon distribution is rationally regulated to construct high-sulfur-content and high-performance Li-S batteries.Concretely,a double-layer carbon(DLC)cathode is prepared by fabricating a surface carbon layer on the carbon/sulfur composite.The surface carbon layer not only provides more electrochemically active surfaces,but also blocks the polysulfide shuttle.Consequently,the DLC configuration with an increased sulfur content by nearly 10 wt%renders an initial areal capacity of 3.40 mAh cm^(-2) and capacity retention of 83.8%during 50 cycles,which is about two times than that of the low-sulfur-content cathode.The strategy of carbon distribution regulation affords an effective pathway to construct advanced high-sulfur-content cathodes for practical high-energy-density Li-S batteries.
基金supported by the National Key Research and Development Program(2016YFA0202500 and 2016YFA0200102)the National Natural Science Foundation of China(21776019,21805162,51772069,and U1801257)+1 种基金China Postdoctoral Science Foundation(2018M630165)Beijing Key Research and Development Plan(Z181100004518001)
文摘Lithium–sulfur(Li–S)batteries have been recognized as promising substitutes for current energy-storage technologies owing to their exceptional advantages in very high-energy density and excellent material sustainability.The cathode with high sulfur areal loading is vital for the practical applications of Li–S batteries with very high energy density.However,the high sulfur loading in an electrode results in poor rate and cycling performances of batteries in most cases.Herein,we used diameters of 5.0(D5)and 13.0(D13)mm to probe the effect of electrodes with different sizes on the rate and cycling performances under a high sulfur loading(4.5 mg cm^-2).The cell with D5 sulfur cathode exhibits better rate and cycling performances comparing with a large(D13)cathode.Both the high concentration of lithium polysulfides and corrosion of lithium metal anode impede rapid kinetics of sulfur redox reactions,which results in inferior battery performance of the Li–S cell with large diameter cathode.This work highlights the importance of rational matching of the large sulfur cathode with a high areal sulfur loading,carbon modified separators,organic electrolyte,and Li metal anode in a pouch cell,wherein the sulfur redox kinetics and lithium metal protection should be carefully considered under the flooded lithium polysulfide conditions in a working Li–S battery.
基金the National Natural Science Foundation of China(Grant No.11872317)Science Challenge Project(Grant No.TZ2018001)the Fundamental Research Funds for the Central Universities(Grant No.3102019ZX001).
文摘By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band(ASB) at low compression strain, while bimodal alloy is considerably ASBresistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB.In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary a grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of a lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of a/β nanomultilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.
基金financially supported by National Key Research and Development Program(No.2019YFA0210600)the Major Technological Innovation Project of Hubei Science and Technology Department(No.2019AAA164)+1 种基金the National Natural Science Foundation of China(No.51972107)the Innovative Research Groups of Hunan Province(No.2019JJ10001)。
文摘The lithium-sulfur battery is the subject of much recent attention due to the high theoretical energy density,but practical applications are challenged by fast decay owing to polysulfide shuttle and electrode architecture degradation.A comprehensive study of the sulfur host microstructure design and the cell architecture construction based on the MXene phase(Ti3C2Tx nanosheets) is performed,aiming at realize stable cycling performance of Li-S battery with high sulfur areal loading.The interwoven KB@Ti3C2Tx composite formed by self-assembly of MXene and Ktej en black,not only provides superior conductivity and maintains the electrode integrality bearing the volume expansion/shrinkage when used as the sulfur host,but also functions as an interlayer on separator to further retard the polysulfide cross-diffusion that possibly escaped from the cathode.The KB@Ti3C2Tx interlayer is only 0.28 mg cm-2 in areal loading and 3 μm in thickness,which accounts a little contribution to the thick sulfur electrode;thus,the impacts on the energy density is minimal.By coupling the robust KB@Ti3C2Tx cathode and the effective KB@Ti3C2Tx modified separator,a stable Li-S battery with high sulfur areal loading(5.6 mg cm-2) and high areal capacity(6.4 mAh cm-2) at relatively lean electrolyte is achieved.
基金financial support from the National Natural Science Foundation of China (No. 51172014)the National 973 Program of China (No. 2009CB219903)the Scientific Innovation Grant for Excellent Young Scientists of Hebei University of Technology (No. 2015001)
文摘Three-dimensionally（3D） ordered mesoporous carbon sphere arrays（OMCS） are explored to support high loading（60 wt%） Pt nanoparticles as electrocatalysts for the methanol oxidation reaction（MOR）.The OMCS has a unique hierarchical nanostructure with ordered large mesopores and macropores that can facilitate high dispersion of the Pt nanoparticles and fast mass transport during the reactions. The prepared Pt/OMCS exhibits uniformly dispersed Pt nanoparticles with an average size of- 2.0 nm on the mesoporous walls of the carbon spheres. The Pt/OMCS catalyst shows significantly enhanced specific electrochemically active surface area（ECSA）（73.5 m^2g^-1） and electrocatalytic activity（0.69 mA cm^-2）for the MOR compared with the commercial 60 wt% Pt/C catalyst.
基金Korea Institute of Energy Technology Evaluation and Planning,Grant/Award Number:20214000000320Samsung Research Funding&Incubation Center of Samsung Electronics,Grant/Award Number:SRFC-MA1901-06。
文摘Realizing a lithium sulfide(Li_(2)S)cathode with both high energy density and a long lifespan requires an innovative cathode design that maximizes electrochemical performance and resists electrode deterioration.Herein,a high-loading Li_(2)S-based cathode with micrometric Li_(2)S particles composed of two-dimensional graphene(Gr)and one-dimensional carbon nanotubes(CNTs)in a compact geometry is developed,and the role of CNTs in stable cycling of high-capacity Li–S batteries is emphasized.In a dimensionally combined carbon matrix,CNTs embedded within the Gr sheets create robust and sustainable electron diffusion pathways while suppressing the passivation of the active carbon surface.As a unique point,during the first charging process,the proposed cathode is fully activated through the direct conversion of Li_(2)S into S_(8) without inducing lithium polysulfide formation.The direct conversion of Li_(2)S into S_(8) in the composite cathode is ubiquitously investigated using the combined study of in situ Raman spectroscopy,in situ optical microscopy,and cryogenic transmission electron microscopy.The composite cathode demonstrates unprecedented electrochemical properties even with a high Li_(2)S loading of 10 mg cm^(–2);in particular,the practical and safe Li–S full cell coupled with a graphite anode shows ultra-long-term cycling stability over 800 cycles.
