Two types of carbides M23C6 and M7C3 precipitate orderly as carbon concentration in a high Cr-Ni austenitic steel increases during carburization process. The mathematical model that describes diffusion of carbon and t...Two types of carbides M23C6 and M7C3 precipitate orderly as carbon concentration in a high Cr-Ni austenitic steel increases during carburization process. The mathematical model that describes diffusion of carbon and the precipitation of M23C6 and M7C3 has been studied. A criterion to judge when the transformation of M23C6 to M7C3 is over and M7C3 precipitates directly has been given in simulated calculation. By applying the model, the carburization of HK40 steel has been calculated by means of finite difference computation techniques. The pack carburization tests for the HK40 steel have been carried out at 1273 K. The comparison between the experimental and the calculated results show acceptable agreement.展开更多
The effects of the eutectic carbides rand secondary carbides on creep deformation and rupture in smooth bars and CT specimens have been studied. The results show that the resistance of the eutectic carbides of skeleto...The effects of the eutectic carbides rand secondary carbides on creep deformation and rupture in smooth bars and CT specimens have been studied. The results show that the resistance of the eutectic carbides of skeleton shape to crack growth is larger than that of the blocky shape carbides. The dendritic segregation of secondary carbides promotes the creep ductility. As the secondary carbide particles become coarser, the creep ductility increases and the crack growth rate decreases. However, if the size of secondary carbide is too large, the creep strength decreases too much and therefore crack growth rate increases.展开更多
As-cast HK40 steel was aged at 700, 800, or 900℃ for times as long as 2000 h. Microstructural characterization showed that the primary M_7C_3 carbide network contained a substantial content of manganese, in agreement...As-cast HK40 steel was aged at 700, 800, or 900℃ for times as long as 2000 h. Microstructural characterization showed that the primary M_7C_3 carbide network contained a substantial content of manganese, in agreement with the microsegregation of manganese calculated by Thermo-Calc using the Scheil–Gulliver module. The dissolution of primary carbides caused the solute supersaturation of austenite and subsequent precipitation of fine M_(23)C_6 carbides in the austenite matrix for aged specimens. During prolonged aging, the carbide size increased with increasing time because of the coarsening process. A time–temperature–precipitation diagram for M_(23)C_6 carbides was calculated using the Thermo-CalcPRISMA software; this diagram showed good agreement with the experimental growth kinetics of precipitation. The fine carbide precipitation caused an increase in hardness; however, the coarsening process of carbides promoted a decrease in hardness. Nanoindentation tests of the austenite matrix indicated an increase in ductility with increasing aging time.展开更多
基金This work was supported by the National Natural Science Foundation of China under grant No.50071016.
文摘Two types of carbides M23C6 and M7C3 precipitate orderly as carbon concentration in a high Cr-Ni austenitic steel increases during carburization process. The mathematical model that describes diffusion of carbon and the precipitation of M23C6 and M7C3 has been studied. A criterion to judge when the transformation of M23C6 to M7C3 is over and M7C3 precipitates directly has been given in simulated calculation. By applying the model, the carburization of HK40 steel has been calculated by means of finite difference computation techniques. The pack carburization tests for the HK40 steel have been carried out at 1273 K. The comparison between the experimental and the calculated results show acceptable agreement.
文摘The effects of the eutectic carbides rand secondary carbides on creep deformation and rupture in smooth bars and CT specimens have been studied. The results show that the resistance of the eutectic carbides of skeleton shape to crack growth is larger than that of the blocky shape carbides. The dendritic segregation of secondary carbides promotes the creep ductility. As the secondary carbide particles become coarser, the creep ductility increases and the crack growth rate decreases. However, if the size of secondary carbide is too large, the creep strength decreases too much and therefore crack growth rate increases.
基金financial support from SIP-BEIFI-IPN and CONACYT
文摘As-cast HK40 steel was aged at 700, 800, or 900℃ for times as long as 2000 h. Microstructural characterization showed that the primary M_7C_3 carbide network contained a substantial content of manganese, in agreement with the microsegregation of manganese calculated by Thermo-Calc using the Scheil–Gulliver module. The dissolution of primary carbides caused the solute supersaturation of austenite and subsequent precipitation of fine M_(23)C_6 carbides in the austenite matrix for aged specimens. During prolonged aging, the carbide size increased with increasing time because of the coarsening process. A time–temperature–precipitation diagram for M_(23)C_6 carbides was calculated using the Thermo-CalcPRISMA software; this diagram showed good agreement with the experimental growth kinetics of precipitation. The fine carbide precipitation caused an increase in hardness; however, the coarsening process of carbides promoted a decrease in hardness. Nanoindentation tests of the austenite matrix indicated an increase in ductility with increasing aging time.
