In Fourier transform profilometry （FTP）, we must restrain spectrum overlapping caused by the nonlinearity of the charge coupled device （CCD） and increase the measurement accuracy of the object shape. Firstly, the ...In Fourier transform profilometry （FTP）, we must restrain spectrum overlapping caused by the nonlinearity of the charge coupled device （CCD） and increase the measurement accuracy of the object shape. Firstly, the causes of producing higher-order spectrum components and inducing spectrum overlapping are analysed theoretically, and a simple physical ex- planation and analytical deduction are given. Secondly, aiming to suppress spectrum overlapping and improve measurement accuracy, the influence of spatial carrier frequency of projection grating on them is analysed. A method of increasing the spatial carrier frequency of projection grating to restrain or reduce the spectrum overlapping significantly is proposed. We then analyze the mechanism of how the spectrum overlapping is reduced. Finally, the simulation results and experimental measurements verify the correction of the proposed theory and method.展开更多
In order to study the strength of the composite material plate problems, need to adopt a nondestructive testing method to obtain the specimen surface under the effect of high-speed impact regularity of shape. The proj...In order to study the strength of the composite material plate problems, need to adopt a nondestructive testing method to obtain the specimen surface under the effect of high-speed impact regularity of shape. The projection profilometry was used to measure the surface profile or the full field deformation. Furtherly, by using the Fourier transform algorithm, there is only one frame of captured image</span><span style="font-family:Verdana;"> which</span><span style="font-family:Verdana;"> is needed in the measurement, so that it can be introduced into the high speed impaction procedure measurement. An experimental system, which was contained with an impact setup and the projection profilometry measurement part, was constructed for the impaction action characteristic research. The metallic impact object can be launched by a gas gun or a spin fan, respectively. The detected object </span><span style="font-family:Verdana;">is</span><span style="font-family:Verdana;"> manufactured by composite materials. In order to increase the surface deformation measurement accuracy, the calibration method and the error was discussed with different calibration specimen. And then, the proposed profilometry measurement method is proved by the gas gun and spin fan projectile test. The surface deformation of the manufactured composite plates and fan case are measured in the impaction procedure. So that the impact action details can be described much more clearly than the traditional video monitoring method.展开更多
The dual-frequency grating measurement theory is proposed in order to carry out the measurement of a discontinuous object. Firstly, the reason why frequency spectra are produced by low frequency gratings and high freq...The dual-frequency grating measurement theory is proposed in order to carry out the measurement of a discontinuous object. Firstly, the reason why frequency spectra are produced by low frequency gratings and high frequency gratings in the field of frequency is analysed, and the relationship between the wrapped-phase and the unwrapping-phase is discussed. Secondly, a method to combine the advantages of the two kinds of gratings is proposed： one stripe is produced in the mutation part of the object measured by a suitable low frequency grating designed by MATLAB, then the phase produced by the low frequency grating need not be unfolded. The integer series of stripes is produced by a high frequency grating designed by MATLAB based on the frequency ratio of the two kinds of gratings and the high frequency wrapped-phase, and the high frequency unwrapping-phase is then obtained. In order to verify the correctness of the theoretical analysis, a steep discontinuous object of 600×600 pixels and 10.00 mm in height is simulated and a discontinuous object of ladder shape which is 32.00 mm in height is used in experiment. Both the simulation and the experiment can restore the discontinuous object height accurately by using the dual-frequency grating measurement theory.展开更多
Laser interferometry with higher resolution,faster update rate,and larger dynamic range is highly anticipated in the exploration of physics frontiers,advanced manufacturing,and precision sensing.Real-time dispersive s...Laser interferometry with higher resolution,faster update rate,and larger dynamic range is highly anticipated in the exploration of physics frontiers,advanced manufacturing,and precision sensing.Real-time dispersive spectral interferometry(DSI)shows promise for high-speed precision measurements,whereas the resolution of subnanometers has not yet been achieved.We present a comprehensive theoretical framework to analyze the limitations of real-time DSI based on the signal-to-noise ratio and data volume.A real-time orthogonal polarization spectral interferometry technique is proposed,which utilizes a pair of interferograms with the pi-phase shift to effectively mitigate the phase noise embedded in real-time spectral envelopes,thereby enabling the precise measurements with subnanometer resolution at megahertz frame rates.The recorded time series data are processed through interpolation,segmentation,time–frequency mapping,and de-enveloping to regain the typical cosine-shaped spectral evolution,followed by a fitting-based phase retrieval method to extract the interference phase.The phase resolution of 1.1 mrad(0.91 as for time delay and 0.3 nm for distance)is obtained at the update rate of 22.2 MHz even under the detection bandwidth of 500 MHz,and can be further enhanced to 0.29 mrad(0.24 as for time delay)after 500 times averaging(∼0.5 MHz).Our approach is validated through periodic phase modulations and applied to measure the rapid damped oscillations of a piezo stage,yielding results consistent with those obtained from a commercial picometer interferometer.展开更多
数字化变电站采用固定采样频率10 k Hz采样数据,每周期采样点数为200,不为2的整数次幂;且基波频率的波动会导致非同步采样,直接运用离散傅里叶或快速傅里叶变换分析谐波,会对测量结果产生较大误差,不满足电力系统谐波分析精度的要求。...数字化变电站采用固定采样频率10 k Hz采样数据,每周期采样点数为200,不为2的整数次幂;且基波频率的波动会导致非同步采样,直接运用离散傅里叶或快速傅里叶变换分析谐波,会对测量结果产生较大误差,不满足电力系统谐波分析精度的要求。算术傅里叶变换(AFT)算法简单且并行性好,对计算点数无限制,适用于分析离散信号的频谱。但该算法需要不均匀的采样点,目前电力系统所得到的是均匀采样的数据,因此运用AFT时需先对均匀采样的离散信号进行插值,而插值过程将不可避免地引入误差,影响到AFT算法的谐波分析精度。AFT常用的插值算法为零次插值,此方法存在较大误差,严重影响谐波分析精度,不能满足电力系统的要求。对比了四种平面插值算法,通过仿真分析比较了这四种方法对AFT谐波分析精度的影响。最后选用三次样条插值算法来提高AFT的谐波分析精度。仿真结果表明:在非同步采样条件下,用三次样条插值的AFT谐波分析方法精确度高,稳定性好,满足谐波分析精度的要求,为电力系统谐波分析开辟了新思路。展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61173122, 60970098, 60803024, 90715043, and 61144006)the Postdoctoral Startup Foundation of Central South University, China (Grant No. 1332/74341016030)
文摘In Fourier transform profilometry （FTP）, we must restrain spectrum overlapping caused by the nonlinearity of the charge coupled device （CCD） and increase the measurement accuracy of the object shape. Firstly, the causes of producing higher-order spectrum components and inducing spectrum overlapping are analysed theoretically, and a simple physical ex- planation and analytical deduction are given. Secondly, aiming to suppress spectrum overlapping and improve measurement accuracy, the influence of spatial carrier frequency of projection grating on them is analysed. A method of increasing the spatial carrier frequency of projection grating to restrain or reduce the spectrum overlapping significantly is proposed. We then analyze the mechanism of how the spectrum overlapping is reduced. Finally, the simulation results and experimental measurements verify the correction of the proposed theory and method.
文摘In order to study the strength of the composite material plate problems, need to adopt a nondestructive testing method to obtain the specimen surface under the effect of high-speed impact regularity of shape. The projection profilometry was used to measure the surface profile or the full field deformation. Furtherly, by using the Fourier transform algorithm, there is only one frame of captured image</span><span style="font-family:Verdana;"> which</span><span style="font-family:Verdana;"> is needed in the measurement, so that it can be introduced into the high speed impaction procedure measurement. An experimental system, which was contained with an impact setup and the projection profilometry measurement part, was constructed for the impaction action characteristic research. The metallic impact object can be launched by a gas gun or a spin fan, respectively. The detected object </span><span style="font-family:Verdana;">is</span><span style="font-family:Verdana;"> manufactured by composite materials. In order to increase the surface deformation measurement accuracy, the calibration method and the error was discussed with different calibration specimen. And then, the proposed profilometry measurement method is proved by the gas gun and spin fan projectile test. The surface deformation of the manufactured composite plates and fan case are measured in the impaction procedure. So that the impact action details can be described much more clearly than the traditional video monitoring method.
基金Project supported by the Science-Technology Program Research Foundation of Hunan Province, China (Grant No 2009FJ3187)the 11th Five-year Plan for Key Construction Academic Subject (Optics) of Hunan Province, China (Grant No 06GXCD02)
文摘The dual-frequency grating measurement theory is proposed in order to carry out the measurement of a discontinuous object. Firstly, the reason why frequency spectra are produced by low frequency gratings and high frequency gratings in the field of frequency is analysed, and the relationship between the wrapped-phase and the unwrapping-phase is discussed. Secondly, a method to combine the advantages of the two kinds of gratings is proposed： one stripe is produced in the mutation part of the object measured by a suitable low frequency grating designed by MATLAB, then the phase produced by the low frequency grating need not be unfolded. The integer series of stripes is produced by a high frequency grating designed by MATLAB based on the frequency ratio of the two kinds of gratings and the high frequency wrapped-phase, and the high frequency unwrapping-phase is then obtained. In order to verify the correctness of the theoretical analysis, a steep discontinuous object of 600×600 pixels and 10.00 mm in height is simulated and a discontinuous object of ladder shape which is 32.00 mm in height is used in experiment. Both the simulation and the experiment can restore the discontinuous object height accurately by using the dual-frequency grating measurement theory.
基金supported by the National Natural Science Foundation of China(Grant No.61705193)the Natural Science Foundation of Zhejiang Province(Grant No.LGG20F050002)the Jinhua Science and Technology Plan(Project No.2024-1-064).
文摘Laser interferometry with higher resolution,faster update rate,and larger dynamic range is highly anticipated in the exploration of physics frontiers,advanced manufacturing,and precision sensing.Real-time dispersive spectral interferometry(DSI)shows promise for high-speed precision measurements,whereas the resolution of subnanometers has not yet been achieved.We present a comprehensive theoretical framework to analyze the limitations of real-time DSI based on the signal-to-noise ratio and data volume.A real-time orthogonal polarization spectral interferometry technique is proposed,which utilizes a pair of interferograms with the pi-phase shift to effectively mitigate the phase noise embedded in real-time spectral envelopes,thereby enabling the precise measurements with subnanometer resolution at megahertz frame rates.The recorded time series data are processed through interpolation,segmentation,time–frequency mapping,and de-enveloping to regain the typical cosine-shaped spectral evolution,followed by a fitting-based phase retrieval method to extract the interference phase.The phase resolution of 1.1 mrad(0.91 as for time delay and 0.3 nm for distance)is obtained at the update rate of 22.2 MHz even under the detection bandwidth of 500 MHz,and can be further enhanced to 0.29 mrad(0.24 as for time delay)after 500 times averaging(∼0.5 MHz).Our approach is validated through periodic phase modulations and applied to measure the rapid damped oscillations of a piezo stage,yielding results consistent with those obtained from a commercial picometer interferometer.
文摘提出一种新的摄像机标定方法,该方法基于2D共面参照物摄像机标定方法和傅里叶条纹分析方法.将已知相位分布的平面二维正弦灰度调制条纹图作为平面标定靶,通过傅里叶条纹分析方法计算出两个截断正交相位分布,利用截断正交相位分布并结合二维正弦条纹图特点提取相应的图像特征点,建立像素坐标与2D平面坐标的对应关系.将该二维平面靶在摄像机成像空间中放置不同的位置,并完成相应的特征点提取,根据2D共面参照物摄像机标定方法即可完成摄像机标定.该方法利用平面相位测量的高准确度来提高标定特征点的提取准确度,从而提高标定准确度.实验对双摄像机系统进行了标定,标定后该系统对标定靶进行测量,标准偏差达到0 .010 mm.
文摘数字化变电站采用固定采样频率10 k Hz采样数据,每周期采样点数为200,不为2的整数次幂;且基波频率的波动会导致非同步采样,直接运用离散傅里叶或快速傅里叶变换分析谐波,会对测量结果产生较大误差,不满足电力系统谐波分析精度的要求。算术傅里叶变换(AFT)算法简单且并行性好,对计算点数无限制,适用于分析离散信号的频谱。但该算法需要不均匀的采样点,目前电力系统所得到的是均匀采样的数据,因此运用AFT时需先对均匀采样的离散信号进行插值,而插值过程将不可避免地引入误差,影响到AFT算法的谐波分析精度。AFT常用的插值算法为零次插值,此方法存在较大误差,严重影响谐波分析精度,不能满足电力系统的要求。对比了四种平面插值算法,通过仿真分析比较了这四种方法对AFT谐波分析精度的影响。最后选用三次样条插值算法来提高AFT的谐波分析精度。仿真结果表明:在非同步采样条件下,用三次样条插值的AFT谐波分析方法精确度高,稳定性好,满足谐波分析精度的要求,为电力系统谐波分析开辟了新思路。
