An abnormal fluorescence intensity ratio （FIR） between two green emissions of Er3＋, at room temperature, which is larger than a normal value, emerged in many reported articles. However, up to now detailed work has ...An abnormal fluorescence intensity ratio （FIR） between two green emissions of Er3＋, at room temperature, which is larger than a normal value, emerged in many reported articles. However, up to now detailed work has seldom been done to clarify this abnormal phenomenon. In this paper, green upconversion luminescence of the β-NaLuF4：20%yb3＋,2%Er3＋ powder sample was investigated under 980 um excitation at different circumstances, different pump power densities and different temperatures as well as different air pressures. The corresponding local temperature calculated using FIR technique increased gradually with the enhancement of the pump power density. It was demonstrated that high pump power density of 980 nm laser led to the increase of local temperature of the luminescent material, which further gave the abnormal FIR.展开更多
Cadmium-free Ⅰ-Ⅲ-Ⅵ quantum dots （QDs）, represented by Cu-In-S （CIS）, are widely investigated for their non-toxicity and tunable emission properties. In this work, Zn-Cu-In-S （ZCIS） alloyed QDs were synthesize...Cadmium-free Ⅰ-Ⅲ-Ⅵ quantum dots （QDs）, represented by Cu-In-S （CIS）, are widely investigated for their non-toxicity and tunable emission properties. In this work, Zn-Cu-In-S （ZCIS） alloyed QDs were synthesized via a solvothermal approach by heating up a mixture of the corresponding metal precursors and sulphur powder with dodecanethiol in oleylamine media, and the fluorescent intensity was greatly enhanced by coating ZnS （ZS） shell. By changing the ratio of Cu, the as prepared ZCIS-ZS QDs showed composition-tunable photoluminescent （PL） emission over the visible spectral window from about 500 nm to 620 rim, which is much wider than that of CIS QDs. Moreover, the influence of excitation wavelength, reaction temperature and time on the optical properties of the ZCIS-ZS QDs was also studied. This research provides a feasible and simple approach to prepare ZCIS-ZS QDs with large tunable spectral range on visible region, which could greatly contribute to the development of potential applications due to their non-toxicity and excellent optical properties.展开更多
The thorough investigation of nanoplastics(NPs)in aqueous environments requires efficient and expeditious quantitative analytical methods that are sensitive to environmentally relevant NP concentrations and convenient...The thorough investigation of nanoplastics(NPs)in aqueous environments requires efficient and expeditious quantitative analytical methods that are sensitive to environmentally relevant NP concentrations and convenient to employ.Optical analysis-based quantitative methods have been acknowledged as effective and rapid approaches for quantifying NP concentrations in laboratory-scale studies.Herein,we compared three commonly used optical response indicators,namely fluorescence intensity(FI),ultraviolet absorbance,and turbidity,to assess their performance in quantifying NPs.Furthermore,orthogonal experiments were conducted to evaluate the influence of various water quality parameters on the preferred indicator-based quantification method.The results revealed that FI exhibits the highest correlation coefficient(>0.99)with NP concentration.Notably,the limit of quantification(LOQ)for various types of NPs is exceptionally low,ranging from 0.0089 to 0.0584 mg/L in ultrapure water,well below environmentally relevant concentrations.Despite variations in water quality parameters such as pH,salinity,suspended solids(SS),and humic acid,a robust relationship between detectable FI and NP concentration was identified.However,an increased matrix,especially SS in water samples,results in an enhanced LOQ for NPs.Nevertheless,the quantitative method remains applicable in real water bodies,especially in drinking water,with NP LOQ as low as 0.0157–0.0711 mg/L.This exceeds the previously reported detectable concentration for 100 nm NPs at 40µg/mL using surface-enhanced Raman spectroscopy.This study confirms the potential of FI as a reliable indicator for the rapid quantification of NPs in aqueous environments,offering substantial advantages in terms of both convenience and cost-effectiveness.展开更多
The Ultrasonic cavitation effect has been widely used in mechanical engineering,chemical engineering,biomedicine,and many other fields.The quantitative characterization of ultrasonic cavitation intensity has always be...The Ultrasonic cavitation effect has been widely used in mechanical engineering,chemical engineering,biomedicine,and many other fields.The quantitative characterization of ultrasonic cavitation intensity has always been a difficulty.Based on this,a fluorescence analysis method has been adopted to explore ultrasonic cavitation intensity in this paper.In the experiment of fluorescence intensity measurement,terephthalic acid(TA)was used as the fluorescent probe,ultrasonic power,ultrasonic frequency,and irradiation time were independent variables,and fluorescence intensity and fluorescence peak area were used as experimental results.The collapse of cavitation bubble will cause molecular bond breakage and release·OH,and the non-fluorescent substance TA will form the strong fluorescent substance TAOH with·OH.The spectra of the treated samples were measured by a F-7000 fluorescence spectrophotometer.The results showed that the fluorescence intensity and fluorescence peak area increased rapidly after ultrasonic cavitation treatment,and then increased slowly with the increase of ultrasonic power,which gradually increased with the increase of irradiation time.They first decreased and then increased with the increase of ultrasonic frequency from 20 kHz to 40 kHz.The irradiation time was the most influential factor,and the cavitation intensity of low frequency was higher overall.The fluorescence intensity and fluorescence peak area of the samples increased by 2-20 times after ultrasonic treatment,which could increase from 69 and 5238 to 1387 and 95451,respectively.After the irradiation time exceeded 25 min,the growth rate of fluorescence intensity slowed down,which was caused by the decrease of gas content and TA concentration in the solution.The study quantitatively characterized the cavitation intensity,reflecting the advantages of fluorescence analysis,and provided a basis for the further study of ultra-sonic cavitation.展开更多
Rice yield in the black soil region of Northeast China has been declining due to severe soil fertility degradation caused by both biotic and abiotic factors.Artificial humic substance(A-HS)has attracted much attention...Rice yield in the black soil region of Northeast China has been declining due to severe soil fertility degradation caused by both biotic and abiotic factors.Artificial humic substance(A-HS)has attracted much attention due to its high cost-effectiveness and great potential to improve soil fertility.However,the specific effects of A-HS on nutrient contents in rice nursery soils remain unclear.This study systematically investigated the effects of rational application of A-HS on soil nutrient turnover and yield and analyzed the changes in soil nutrients and microbial communities at Qianfeng Farm,Northeast China.The results indicated that the application of A-HS significantly increased soil dissolved organic matter and nutrient contents in the native and seedling soils.In addition,the root growth and yield of the seedlings at maturity were effectively promoted.More interestingly,the application of A-HS significantly altered plant growth-promoting rhizobacteria,such as Noviherbaspirillum,Klebsiella,and Pedobacter,improving natural barrier formation and soil nutrient conversion.It could be concluded that A-HS significantly enhanced crop nutrient uptake and accumulation by altering soil bacterial communities.In general,the application of A-HS could be profitable and sustainable in rice production.The current study from multiple aspects provides valuable insights into the benefits of A-HS in promoting crop growth and development,which could have important implications for agriculture and food security.展开更多
To develop new up-conversion luminescent materials for non-contact optical thermometer with high sensitivity and temperature re solution,a battery of KBaGd(MoO_(4))_(3):Yb^(3+),Ho^(3+)phosphors were fabricated through...To develop new up-conversion luminescent materials for non-contact optical thermometer with high sensitivity and temperature re solution,a battery of KBaGd(MoO_(4))_(3):Yb^(3+),Ho^(3+)phosphors were fabricated through solid reaction process.The crystal structure,up-conversion luminescence,energy transfer,thermal stability and optical temperature sensing performances were studied in detail.Under 980 nm laser excitation,the KBaGd(MoO_(4))_(3):Yb^(3+),Ho^(3+)phosphor exhibits distinctive emission bands of Ho^(3+)at545,660,and 755 nm,and excellent illuminant performance.Based on the thermally coupled levels(TCLs)of Ho^(3+),both the relative sensitivity(S_(r))and absolute sensitivity(S_(a))display similar change trends,with the highest values of 6.73%/K(@298 K)and 5.69%/K(@298 K),respectively.Furthermore,the highest Saof 13.90%/K(@623 K)and the ultimate Srof 0.62%/K(@298 K)are achieved based on non-TCLs of Ho^(3+).Therefore,KBaGd(MoO_(4))_(3):Yb^(3+),Ho^(3+)phosphor is a promising candidate for self-referenced optical thermometry.展开更多
To meet the high demands of modern technology for temperature sensors,Lu_(2)WO_(6):Sm^(3+)self-activated phosphors were selected to design four-mode optical thermometers.A comprehensive investigation was conducted on ...To meet the high demands of modern technology for temperature sensors,Lu_(2)WO_(6):Sm^(3+)self-activated phosphors were selected to design four-mode optical thermometers.A comprehensive investigation was conducted on the synthetic method,structural and luminescent characteristics,and energy transfer mechanism([WO6]6-→Sm^(3+)). Due to the different temperature responses of two emission centers([WO6]6-and Sm^(3+)),the temperature sensing capability of Lu_(2)WO_(6):Sm^(3+)phosphors was studied.Fluorescence intensity(FI),fluorescence intensity ratio(FIR),Commission Internationale de L'Eclairage coordinates and excitation intensity ratio are the four modes for temperature sensing,and their maximum relative sensitivities are 2.62%/K(350 K),2.06%/K(320 K),0.67%/K(329 K) and 2.42%/K(303 K),respectively.Furthermore,within 303-483 K temperature range,the relative sensitivities based on FI and FIR are bigger than 1.67%/K and 1.16%/K,respectively.Our findings suggest that Lu_(2)WO_(6):Sm^(3+)phosphors with four temperature measurement modes might be applied in multi-mode self-calibration optical thermometers.展开更多
Accurate temperature measurement plays an important role in a variety of industrial processes and scientific researches.In our work,the dual-mode temperature response nanoprobe CDs-Tb-TMPDPA containing a two-photon li...Accurate temperature measurement plays an important role in a variety of industrial processes and scientific researches.In our work,the dual-mode temperature response nanoprobe CDs-Tb-TMPDPA containing a two-photon ligand(4-(2,4,6-trimethoxyphenyl)-pyridine-2,6-dicarboxylic acid,TMPDPA)sensitized Tb3+as a temperature-sensitive unit and carbon dots(CDs)as photothermal reagent and a fluorescence reference unit,have been designed and synthesized.In this system,both the fluorescence intensity ratio and the fluorescence lifetime have a good response to temperature.In additio n,due to the excellent photothermal conversion capability of CDs,photothermal antibacterial ability was also tested.Based on the temperature dependence of the fluorescence and the two-photon excitation characteristics of CDs-Tb-TMPDPA,the nanoprobe can also be used in the anti-counterfeiting.Our finding opens a new prospect for the use of two-photon sensitized dual-mode fluorescence thermometers.展开更多
Rapid detection and identification of Escherichia coli(E.coli)is essential to prevent its quickly spread.In this study,a novel fluorescence probe based on ZnTe quantum dots(QDs)modified by mannose(MAN)had been prepare...Rapid detection and identification of Escherichia coli(E.coli)is essential to prevent its quickly spread.In this study,a novel fluorescence probe based on ZnTe quantum dots(QDs)modified by mannose(MAN)had been prepared for the determination of E.coli.The results showed that the obtained QDs showed excellent selectivity toward E.coli,and presented a good linearity in range of 1.0×10~5~1.0×10~8 CFU/mL.The optimum fluorescence intensity for detecting E.coli was found to be at pH 7.0 with a temperature of25℃and incubation time of 20 min.Under these optimum conditions,the detection limit of E.coli was4.6×10~4 CFU/mL.The quenching was discussed to be a static quenching procedure,which was proved by the quenching efficiency of QDs decreased with the temperature increasing.展开更多
Rare earth co-doped phosphor for fluorescence intensity ratio(FIR) thermometer has gained increasing attention in recent years. Herein, the novel Tb^(3+)and Eu^(3+)co-doped K_(3)SrBi(P_(2)O_(7))_(2)(KSBP) phosphate ph...Rare earth co-doped phosphor for fluorescence intensity ratio(FIR) thermometer has gained increasing attention in recent years. Herein, the novel Tb^(3+)and Eu^(3+)co-doped K_(3)SrBi(P_(2)O_(7))_(2)(KSBP) phosphate phosphors were reported. The crystal structure of the title phosphor was determined using Rietveld refinement and proved to have a three-dimensional structure. The time-resolved spectroscopy reveals that there is almost no energy transfer between Tb^(3+)and Eu^(3+). More importantly, Tb^(3+)and Eu^(3+)emissions show different thermal quenching behaviors, which claims the potential of this material for application in optical thermometer. The FIR of the typical KSBP:0.02Tb^(3+),0.04Eu^(3+)sample demonstrates a polynomial relationship as a function of temperature and the absolute and relative sensitivity are0.025 K^(-1) and 0.59%/K, respectively. In general, our study reports a novel and potential KSBP:Tb^(3+),Eu^(3+)phosphate phosphor that is promising for use in high-sensitive FIR thermometers.展开更多
Nd^(3+)-doped tellurite glasses are promising materials for thermometers based on the fluorescence intensity ratio(FIR)technique.Nevertheless,at high Nd^(3+)concentrations,energy transfer(ET)processes such as optical ...Nd^(3+)-doped tellurite glasses are promising materials for thermometers based on the fluorescence intensity ratio(FIR)technique.Nevertheless,at high Nd^(3+)concentrations,energy transfer(ET)processes such as optical reabsorption and cross-relaxation can affect the Nd^(3+)emission,which has been little explored in the literature.Therefore,the present work investigated the use of Nd^(3+)-doped tellurite glass(samples doped with Nd^(3+)at 0.2 mol%,0.5 mol%,2.0 mol%,and 4.0 mol%)in fluorescence thermometers,in the temperature range from 299 to 371 K.The results indicate a strong dependence of the FIR parameters on the Nd^(3+)concentration,due to changes in the emission band profiles caused by optical reabsorption of the Nd^(3+)emissions and cross-relaxation processes.A decrease of the relative sensitivity of the ratio^(4)F_(5/2)→^(4)I_(9/2)/^(4)F_(3/2)→^(4)I_(9/2)is observed for samples doped with higher amounts of Nd^(3+).The maximum relative sensitivity at 299 K is 3.00%/K,which is the highest value among the reported Nd^(3+)ions.展开更多
With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are hig...With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are highly desired,In this wo rk,rare earth Eu^(2+) ions were incorporated Wnto CsCu_(2)I_(3) microcrystals by solidstate reaction,Under a single UV excitation,the as-synthesized samples exhibit two emissions:452 nm blue emission from the 5d→4f transition of Eu^(2+)and 582 nm yellow emission from self-trapped exciton e mission of CsCu_(2)I_(3).The photoluminescence quantum yield reaches to 50%,The dual-band emission of Eu^(2+)-doped CsCu_(2)I_(3) shows different temperature responses in the range of 260-360 K.Based on fluorescence intensity ratio technology,the maximum absolute sensitivity and re Iative sensitivity are 0.091 K^(-1)(at 360 K) and 2.60%/K(at 260 K),respectively.These results suggest that Eu^(2+)-doped GsCu_(2)I_(3) could be a good candidate for highly sensitive optical thermometer.展开更多
In this research,a series of Sm^(3+) doped CsLu(WO_(4))_(2) phosphors was prepared via high temperature solid phase technique to design new red phosphors and optical thermometric materials.Their structures,morphology,...In this research,a series of Sm^(3+) doped CsLu(WO_(4))_(2) phosphors was prepared via high temperature solid phase technique to design new red phosphors and optical thermometric materials.Their structures,morphology,band gap and luminescence properties were characterized by X-ray diffraction,scanning electron microscopy,diffuse reflection and luminescence spectra,respectively.Under UV excitation,CsLu(WO_(4))_(2) gives rise to a blue broad emission band between 350 and 700 nm,which stems from the ^(3)T_(1u)→^(1)A_(1g) transition of WO_(6)^(6-) groups.When Sm^(3+) is introduced into CsLu(WO_(4))_(2),energy transfer between WO_(6)^(6-) groups and Sm^(3+) ions takes place in CsLu(WO_(4))_(2):Sm^(3+)phosphors,and color-tunable luminescence from blue to red is realized by controlling the Sm^(3+) doping concentration.The energy transfer efficiency between WO_(6)^(6-) groups and Sm^(3+) ons was analyzed,and the energy transfer mechanism was determined to be dipole-dipole interactions.According to the temperature-dependent luminescence spectra,WO_(6)^(6-)groups and Sm^(3+)ions exhibit large discrepancy in thermal quenching rates,and thus the temperature sensing properties of CsLu(WO_(4))_(2):Sm^(3+) in the temperature range of 283-403 K were analyzed.Based on the framework of fluorescence intensity ratio theory,the basic optical thermometry parameters including absolute and relative sensitivity of CsLu(WO_(4))_(2):Sm^(3+) we re calculated and the results show that it has great potential for application in optical thermometry.展开更多
Herein,we reported novel Y_(4)GeO_(8):Er^(3+),Yb^(3+)phosphors elaborated via conventional solid-state reaction.and we further explored their properties as optical thermometer by using fluorescence intensity ratio(FIR...Herein,we reported novel Y_(4)GeO_(8):Er^(3+),Yb^(3+)phosphors elaborated via conventional solid-state reaction.and we further explored their properties as optical thermometer by using fluorescence intensity ratio(FIR)method complemented by detailed analysis on crystal structure,up-conversion luminescence and energy transfer from Yb^(3+)to Er^(3+).Upon 980 nm laser excitation,Y_(4)GeO_(8):Er^(3+),Yb^(3+)phosphors present525,547 and 659 nm emission bands assigned to the characteristic transitions of Er^(3+).Furthermore,Y_(4)GeO_(8):Er^(3+),Yb^(3+)samples show outstanding temperature sensing performances.To be specific,the minimal temperature resolution is 0.03 K(303 K),and the relative sensitivity of FIR can be up to 1.152%/K(303 K).Hence,Y_(4)GeO_(8):Er^(3+),Yb^(3+)phosphors can be possible candidates for thermometry devices.展开更多
Herein,we demonstrate an optical thermometer based on single Eu^(2+)doped Ca_(9)Mg_(1.5)(PO_4)_7 phosphors,which were prepared by traditional solid-state reaction technique under a reduction atmosphere.Considerations ...Herein,we demonstrate an optical thermometer based on single Eu^(2+)doped Ca_(9)Mg_(1.5)(PO_4)_7 phosphors,which were prepared by traditional solid-state reaction technique under a reduction atmosphere.Considerations on the bond length obtained by the crystal structure refinement and the dependent photoluminescence performances allow to assign the two distinct emission bands to Eu^(2+)ions occupied Cal-Ca3 and Mg2 sites.Moreover,the blue and red emitting bands perfectly match with the photosynthetic action spectrum,which can enhance the indoor plant photosynthesis.The optimal doping content of Eu^(2+)ions in this Ca_(9)Mg_(1.5)(PO_(4))_(7)system is 3 mol%.The corresponding concentration quenching effect is verified as dipole-dipole interaction with the critical distance of 3.315 nm.Furthermore,by exploiting the fluorescence intensity technique,the optical thermal resistance properties of Ca_(9)Mg_(1.5)(PO_4)_7:Eu^(2+)are identified based on the temperature dependent emission spectra in a range of 303-523 K.In detail,the maximum absolute and relative sensitivity S_(a)and S_(r)of Ca_9Mg_(1.5)(PO_(4))_(7):Eu^(2+)thermometer are as high as 0.637%/K and 0.3155 K^(-1),respectively.Consequently,the Eu^(2+)doped Ca_(9)Mg_(1.5)(PO_(4))_(7)phosphors establish a bifunctional platfo rm for both optical the rmometer and plant growth lighting via multi-site occupancies.展开更多
The crystal structure and surface morphology of the Er^(3+)/Yb^(3+)/Na+:ZnWO_(4) phosphors synthesized by solid state reaction method were analyzed by X-ray diffraction(XRD) and field emission scanning electron micros...The crystal structure and surface morphology of the Er^(3+)/Yb^(3+)/Na+:ZnWO_(4) phosphors synthesized by solid state reaction method were analyzed by X-ray diffraction(XRD) and field emission scanning electron microscopy(FESEM) analysis.The frequency upconversion(UC) emission study in the developed phosphors was investigated by using 980 nm laser diode excitation.The effect of codoping in the Er^(3+):ZnWO_(4) phosphors on the UC emission intensity was studied.The UC emission bands that are exhibited in the blue(490 nm),green(530,552 nm),red(668 nm) and NIR(800 nm) region correspond to the ^(4)F_(7/2)→^(4)I_(15/2).^(2)H_(11/2),^(4)S_(3/2)→^(4)I_(15/2),^(4)F_(9/2)→^(4)I_(15/2) and ^(4)I9/2→^(4)I_(15/2) transitions,respectively.The temperature sensing performance of the Er^(3+)-Yb^(3+)-Na+:ZnWO_(4) phosphors was investigated based on the 2 H_(11/2)→^(4)I_(15/2) and ^(4)S_(3/2)→^(4)I_(15/2) thermally coupled transitions of the Er^(3+)ions.The photometric study was also carried out for the developed phosphors.展开更多
The green and red up-conversion emissions centred at about 534, 549 and 663 nm of wavelength, corresponding respectively to the ^2H11/2 → ^4I15/2, ^4S3/2 → ^4I15/2 and ^4F9/2 → ^4I15/2 transitions of Er^3＋ ions, h...The green and red up-conversion emissions centred at about 534, 549 and 663 nm of wavelength, corresponding respectively to the ^2H11/2 → ^4I15/2, ^4S3/2 → ^4I15/2 and ^4F9/2 → ^4I15/2 transitions of Er^3＋ ions, have been observed for the Er^3＋-doped silicate glass excited by a 978 nm semiconductor laser beam. Excitation power dependent behaviour of the up-conversion emission intensity indicates that a two-photon absorption up-conversion process is responsible for the green and red up-conversion emissions. The temperature dependence of the green up-conversion emissions is also studied in a temperature range of 296-673 K, which shows that Er^3＋-doped silicate glass can be used as a sensor in high-temperature measurement.展开更多
Tb^(3+),Dy^(3+)-co-doped Ca_(9)Tb_(x)Dy_(1-x)(PO_(4))_(5)(SiO_(4))F_(2) phosphors were prepared via high-temperature solidphase reaction method and the potential application in optical temperature measurements due to ...Tb^(3+),Dy^(3+)-co-doped Ca_(9)Tb_(x)Dy_(1-x)(PO_(4))_(5)(SiO_(4))F_(2) phosphors were prepared via high-temperature solidphase reaction method and the potential application in optical temperature measurements due to their color-tunable property was investigated in detail.The photoluminescence emission(PL) and photoluminescence excitation(PLE) spectra results show that the as-prepared phosphors exhibit both Tb^(3+) and Dy^(3+) emissions at 546 nm(^(5)D_(4)-^(7)F_(5) transition of Tb^(3+)) and 587 nm(^(4)F_(9/2)-^(6)H_(13/2) transition of Dy^(3+)) upon 376 nm excitation,respectively.In addition,the fluorescence decay analysis shows that the lifetime of the Tb3+emission rapidly decreases,which confirms the energy transfer existence between Dy^(3+) and Tb^(3+).Under 376 nm excitation,the temperature dependence of the fluorescence intensity ratios for the dualmission bands peaked at 546 and 587 nm was studied in the temperature range from 303 to 573 K.The results show that with the increase of Dy^(3+) concentration,the relative sensitivity first increases and then decreases,what’s more,the maximum relative sensitivity is 3.142×10^(-3)%/K for Ca_(9)Tb_(x)Dy_(1-x)(PO_(4))_(5)(SiO_(4))F_(2)(x=0.4).As a consequence,this preliminary study provides a novel method for exploring the novel thermo meters.展开更多
A new and practical fluorescence temperature detecting system based on fluorescence intensity ratio was proposed . The background theory of fluorescence intensity-ratio method was presented simply. And the characters ...A new and practical fluorescence temperature detecting system based on fluorescence intensity ratio was proposed . The background theory of fluorescence intensity-ratio method was presented simply. And the characters of rare earth doped samples were detailed. The erbium-doped fiber was chosen as the sensing element. The energy levels of 2H11/2 and 4S3/2 are responsible for the emission of radiation at approximately 530 and 555 nm. The erbium-doped (960 ppm) fiber of length 20 cm and core diameter 3.2μm was used as the sensing part. A silica photodiode transfers the fluorescence signal to electric signal, then the ratio of the average of the two different signals was calculated by the computer and the temperature was obtained. The ratio R of the intensity resulting from the transition between the two levels varies proportionly with temperature interval from 293 K to 373 K. The sensitivity of the sensor is approximately 0.05 K-1.展开更多
Preliminary characterization of bound extracellular polymeric substances（bEPS） of cyanobacteria is crucial to obtain a better understanding of the formation mechanism of cyanobacterial bloom. However,the characteriz...Preliminary characterization of bound extracellular polymeric substances（bEPS） of cyanobacteria is crucial to obtain a better understanding of the formation mechanism of cyanobacterial bloom. However,the characterization of bEPS can be affected by extraction methods. Five sets（including the control） of bEPS from Microcystis extracted by different methods were characterized using three-dimensional excitation and emission matrix（3DEEM） fluorescence spectroscopy combined chemical spectrophotometry; and the characterization results of bEPS samples were further compared. The agents used for extraction were NaOH,pure water and phosphate buffered saline（PBS） containing cationic exchange resins,and hot water. Extraction methods affected the fluorescence signals and intensities in the bEPS. Five fluorescence peaks were observed in the excitation and emission matrix fluorescence spectra of bEPS samples. Two peaks（peaks T1 and T2） present in all extractions were identified as protein-like fluorophores,two（peaks A and C） as humic-like fluorophores,and one（peak E） as a fulvic-like substance.Among these substances,the humic-like and fulvic-like fluorescences were only seen in the bEPS extracted with hot water. Also,NaOH solution extraction could result in strong fluorescence intensities compared to the other extraction methods. It was suggested that NaOH at pH 10.0 was the most appropriate method to extract bEPS from Microcystis. In addition,dialysis could affect the yields and characteristics of extracted bEPS during the determination process. These results will help us to explore the issues of cyanobacterial blooms.展开更多
基金Project supported by the National Natural Science Foundation of China(11374291,11274299 and 11204292)
文摘An abnormal fluorescence intensity ratio （FIR） between two green emissions of Er3＋, at room temperature, which is larger than a normal value, emerged in many reported articles. However, up to now detailed work has seldom been done to clarify this abnormal phenomenon. In this paper, green upconversion luminescence of the β-NaLuF4：20%yb3＋,2%Er3＋ powder sample was investigated under 980 um excitation at different circumstances, different pump power densities and different temperatures as well as different air pressures. The corresponding local temperature calculated using FIR technique increased gradually with the enhancement of the pump power density. It was demonstrated that high pump power density of 980 nm laser led to the increase of local temperature of the luminescent material, which further gave the abnormal FIR.
基金supported financially by the National Natural Science Foundation of China(No.51101013)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-14-012A2 and FRF-TP-15-007A3)
文摘Cadmium-free Ⅰ-Ⅲ-Ⅵ quantum dots （QDs）, represented by Cu-In-S （CIS）, are widely investigated for their non-toxicity and tunable emission properties. In this work, Zn-Cu-In-S （ZCIS） alloyed QDs were synthesized via a solvothermal approach by heating up a mixture of the corresponding metal precursors and sulphur powder with dodecanethiol in oleylamine media, and the fluorescent intensity was greatly enhanced by coating ZnS （ZS） shell. By changing the ratio of Cu, the as prepared ZCIS-ZS QDs showed composition-tunable photoluminescent （PL） emission over the visible spectral window from about 500 nm to 620 rim, which is much wider than that of CIS QDs. Moreover, the influence of excitation wavelength, reaction temperature and time on the optical properties of the ZCIS-ZS QDs was also studied. This research provides a feasible and simple approach to prepare ZCIS-ZS QDs with large tunable spectral range on visible region, which could greatly contribute to the development of potential applications due to their non-toxicity and excellent optical properties.
基金partly supported by the National Natural Science Foundation of China(Nos.22376066 and 22076045)the Science and Technology Commission of Shanghai Municipality’s zhongYangfan Special Project(China)(No.23YF1408400)+1 种基金the Postdoctoral Innovation Talents Support Program(China)(No.BX20230123)the Fundamental Research Funds for the Central Universities(China).
文摘The thorough investigation of nanoplastics(NPs)in aqueous environments requires efficient and expeditious quantitative analytical methods that are sensitive to environmentally relevant NP concentrations and convenient to employ.Optical analysis-based quantitative methods have been acknowledged as effective and rapid approaches for quantifying NP concentrations in laboratory-scale studies.Herein,we compared three commonly used optical response indicators,namely fluorescence intensity(FI),ultraviolet absorbance,and turbidity,to assess their performance in quantifying NPs.Furthermore,orthogonal experiments were conducted to evaluate the influence of various water quality parameters on the preferred indicator-based quantification method.The results revealed that FI exhibits the highest correlation coefficient(>0.99)with NP concentration.Notably,the limit of quantification(LOQ)for various types of NPs is exceptionally low,ranging from 0.0089 to 0.0584 mg/L in ultrapure water,well below environmentally relevant concentrations.Despite variations in water quality parameters such as pH,salinity,suspended solids(SS),and humic acid,a robust relationship between detectable FI and NP concentration was identified.However,an increased matrix,especially SS in water samples,results in an enhanced LOQ for NPs.Nevertheless,the quantitative method remains applicable in real water bodies,especially in drinking water,with NP LOQ as low as 0.0157–0.0711 mg/L.This exceeds the previously reported detectable concentration for 100 nm NPs at 40µg/mL using surface-enhanced Raman spectroscopy.This study confirms the potential of FI as a reliable indicator for the rapid quantification of NPs in aqueous environments,offering substantial advantages in terms of both convenience and cost-effectiveness.
基金Supported by National Natural Science Foundation of China(Grant Nos.52005455,51975540)Shanxi Provincial Central Guidance on Local Science and Technology Development Fund of China(Grant No.YDZJSX2022C005).
文摘The Ultrasonic cavitation effect has been widely used in mechanical engineering,chemical engineering,biomedicine,and many other fields.The quantitative characterization of ultrasonic cavitation intensity has always been a difficulty.Based on this,a fluorescence analysis method has been adopted to explore ultrasonic cavitation intensity in this paper.In the experiment of fluorescence intensity measurement,terephthalic acid(TA)was used as the fluorescent probe,ultrasonic power,ultrasonic frequency,and irradiation time were independent variables,and fluorescence intensity and fluorescence peak area were used as experimental results.The collapse of cavitation bubble will cause molecular bond breakage and release·OH,and the non-fluorescent substance TA will form the strong fluorescent substance TAOH with·OH.The spectra of the treated samples were measured by a F-7000 fluorescence spectrophotometer.The results showed that the fluorescence intensity and fluorescence peak area increased rapidly after ultrasonic cavitation treatment,and then increased slowly with the increase of ultrasonic power,which gradually increased with the increase of irradiation time.They first decreased and then increased with the increase of ultrasonic frequency from 20 kHz to 40 kHz.The irradiation time was the most influential factor,and the cavitation intensity of low frequency was higher overall.The fluorescence intensity and fluorescence peak area of the samples increased by 2-20 times after ultrasonic treatment,which could increase from 69 and 5238 to 1387 and 95451,respectively.After the irradiation time exceeded 25 min,the growth rate of fluorescence intensity slowed down,which was caused by the decrease of gas content and TA concentration in the solution.The study quantitatively characterized the cavitation intensity,reflecting the advantages of fluorescence analysis,and provided a basis for the further study of ultra-sonic cavitation.
基金the financial support by the National Key Research and Development Program of China(No.2022YFD1500100)the National Natural Science Foundation of China(No.52279034)+5 种基金the Outstanding Youth Project of Heilongjiang Province,China(No.JQ2021D001)the Young Longjiang Scholar,China,the Science and Technology Project of Henan Province,China(No.252102321157)the Scientific Research Foundation for Doctoral Talents at Shangqiu Normal University,China(No.700125017)the Natural Science Foundation of Heilongjiang Province,China(No.LH2022D003)the Heilongjiang Postdoctoral Fund,China(No.LBH-Z21037)the Science and Technology Project of Henan Province,China(No.252102110185)。
文摘Rice yield in the black soil region of Northeast China has been declining due to severe soil fertility degradation caused by both biotic and abiotic factors.Artificial humic substance(A-HS)has attracted much attention due to its high cost-effectiveness and great potential to improve soil fertility.However,the specific effects of A-HS on nutrient contents in rice nursery soils remain unclear.This study systematically investigated the effects of rational application of A-HS on soil nutrient turnover and yield and analyzed the changes in soil nutrients and microbial communities at Qianfeng Farm,Northeast China.The results indicated that the application of A-HS significantly increased soil dissolved organic matter and nutrient contents in the native and seedling soils.In addition,the root growth and yield of the seedlings at maturity were effectively promoted.More interestingly,the application of A-HS significantly altered plant growth-promoting rhizobacteria,such as Noviherbaspirillum,Klebsiella,and Pedobacter,improving natural barrier formation and soil nutrient conversion.It could be concluded that A-HS significantly enhanced crop nutrient uptake and accumulation by altering soil bacterial communities.In general,the application of A-HS could be profitable and sustainable in rice production.The current study from multiple aspects provides valuable insights into the benefits of A-HS in promoting crop growth and development,which could have important implications for agriculture and food security.
基金supported by the National Natural Science Foundation of China(61865003)。
文摘To develop new up-conversion luminescent materials for non-contact optical thermometer with high sensitivity and temperature re solution,a battery of KBaGd(MoO_(4))_(3):Yb^(3+),Ho^(3+)phosphors were fabricated through solid reaction process.The crystal structure,up-conversion luminescence,energy transfer,thermal stability and optical temperature sensing performances were studied in detail.Under 980 nm laser excitation,the KBaGd(MoO_(4))_(3):Yb^(3+),Ho^(3+)phosphor exhibits distinctive emission bands of Ho^(3+)at545,660,and 755 nm,and excellent illuminant performance.Based on the thermally coupled levels(TCLs)of Ho^(3+),both the relative sensitivity(S_(r))and absolute sensitivity(S_(a))display similar change trends,with the highest values of 6.73%/K(@298 K)and 5.69%/K(@298 K),respectively.Furthermore,the highest Saof 13.90%/K(@623 K)and the ultimate Srof 0.62%/K(@298 K)are achieved based on non-TCLs of Ho^(3+).Therefore,KBaGd(MoO_(4))_(3):Yb^(3+),Ho^(3+)phosphor is a promising candidate for self-referenced optical thermometry.
文摘To meet the high demands of modern technology for temperature sensors,Lu_(2)WO_(6):Sm^(3+)self-activated phosphors were selected to design four-mode optical thermometers.A comprehensive investigation was conducted on the synthetic method,structural and luminescent characteristics,and energy transfer mechanism([WO6]6-→Sm^(3+)). Due to the different temperature responses of two emission centers([WO6]6-and Sm^(3+)),the temperature sensing capability of Lu_(2)WO_(6):Sm^(3+)phosphors was studied.Fluorescence intensity(FI),fluorescence intensity ratio(FIR),Commission Internationale de L'Eclairage coordinates and excitation intensity ratio are the four modes for temperature sensing,and their maximum relative sensitivities are 2.62%/K(350 K),2.06%/K(320 K),0.67%/K(329 K) and 2.42%/K(303 K),respectively.Furthermore,within 303-483 K temperature range,the relative sensitivities based on FI and FIR are bigger than 1.67%/K and 1.16%/K,respectively.Our findings suggest that Lu_(2)WO_(6):Sm^(3+)phosphors with four temperature measurement modes might be applied in multi-mode self-calibration optical thermometers.
基金the National Natural Science Foundation of China(Nos.21871121,21801104 and 21601074)Fundamental Research Funds for the Central Universities(No.Lzujbky-2018-ot01)。
文摘Accurate temperature measurement plays an important role in a variety of industrial processes and scientific researches.In our work,the dual-mode temperature response nanoprobe CDs-Tb-TMPDPA containing a two-photon ligand(4-(2,4,6-trimethoxyphenyl)-pyridine-2,6-dicarboxylic acid,TMPDPA)sensitized Tb3+as a temperature-sensitive unit and carbon dots(CDs)as photothermal reagent and a fluorescence reference unit,have been designed and synthesized.In this system,both the fluorescence intensity ratio and the fluorescence lifetime have a good response to temperature.In additio n,due to the excellent photothermal conversion capability of CDs,photothermal antibacterial ability was also tested.Based on the temperature dependence of the fluorescence and the two-photon excitation characteristics of CDs-Tb-TMPDPA,the nanoprobe can also be used in the anti-counterfeiting.Our finding opens a new prospect for the use of two-photon sensitized dual-mode fluorescence thermometers.
基金the grants from National Natural Science Foundation of Guangdong Province(Nos.2017A030310666 and 2018A030307003)Guangdong Medical University Nanhai Marine Biomedical Resources R&D Public Service Platform Open Fund Project(Nos.2HC18013 and 2HC18016)+4 种基金"Group-type"Special Support Project for Education Talents in Universities(No.4SG19045G)Foundation of Young Innovative Talents in Guangdong Province Colleges(No.2018KQNCX091)Undergraduate Science&Technology Innovation Foundation of Guangdong Province(Nos.201810571046 and 201810571073)Medical Science and Technology Development Foundation of Guangdong Province(No.A2016355)The Opening Project of State Key Laboratory of Polymer Materials Engineering of Sichuan University(No.sklpme2018-4-23)。
文摘Rapid detection and identification of Escherichia coli(E.coli)is essential to prevent its quickly spread.In this study,a novel fluorescence probe based on ZnTe quantum dots(QDs)modified by mannose(MAN)had been prepared for the determination of E.coli.The results showed that the obtained QDs showed excellent selectivity toward E.coli,and presented a good linearity in range of 1.0×10~5~1.0×10~8 CFU/mL.The optimum fluorescence intensity for detecting E.coli was found to be at pH 7.0 with a temperature of25℃and incubation time of 20 min.Under these optimum conditions,the detection limit of E.coli was4.6×10~4 CFU/mL.The quenching was discussed to be a static quenching procedure,which was proved by the quenching efficiency of QDs decreased with the temperature increasing.
基金Project supported by the National Natural Science Foundation of China(52072348 and 52104272)Scientific Research Start-up Fund of Anhui Polytechnic University(2020YQQ053)+1 种基金Scientific Research Project of Anhui Polytechnic University(Xjky2020083)Innovation and Entrepreneurship Education and Training Project for Anhui Provincial College Students(S202110363258)。
文摘Rare earth co-doped phosphor for fluorescence intensity ratio(FIR) thermometer has gained increasing attention in recent years. Herein, the novel Tb^(3+)and Eu^(3+)co-doped K_(3)SrBi(P_(2)O_(7))_(2)(KSBP) phosphate phosphors were reported. The crystal structure of the title phosphor was determined using Rietveld refinement and proved to have a three-dimensional structure. The time-resolved spectroscopy reveals that there is almost no energy transfer between Tb^(3+)and Eu^(3+). More importantly, Tb^(3+)and Eu^(3+)emissions show different thermal quenching behaviors, which claims the potential of this material for application in optical thermometer. The FIR of the typical KSBP:0.02Tb^(3+),0.04Eu^(3+)sample demonstrates a polynomial relationship as a function of temperature and the absolute and relative sensitivity are0.025 K^(-1) and 0.59%/K, respectively. In general, our study reports a novel and potential KSBP:Tb^(3+),Eu^(3+)phosphate phosphor that is promising for use in high-sensitive FIR thermometers.
基金Project supported by National Council for Scientific and Technological Development(CNPq)(#305067/2019-2,#303707/2022-4,#306452/2018-9)the Development of Education and Science and Technology of the State of Mato Grosso do Sul(FUNDECT)(#59/300.634/2016,#71/027.247/2022)。
文摘Nd^(3+)-doped tellurite glasses are promising materials for thermometers based on the fluorescence intensity ratio(FIR)technique.Nevertheless,at high Nd^(3+)concentrations,energy transfer(ET)processes such as optical reabsorption and cross-relaxation can affect the Nd^(3+)emission,which has been little explored in the literature.Therefore,the present work investigated the use of Nd^(3+)-doped tellurite glass(samples doped with Nd^(3+)at 0.2 mol%,0.5 mol%,2.0 mol%,and 4.0 mol%)in fluorescence thermometers,in the temperature range from 299 to 371 K.The results indicate a strong dependence of the FIR parameters on the Nd^(3+)concentration,due to changes in the emission band profiles caused by optical reabsorption of the Nd^(3+)emissions and cross-relaxation processes.A decrease of the relative sensitivity of the ratio^(4)F_(5/2)→^(4)I_(9/2)/^(4)F_(3/2)→^(4)I_(9/2)is observed for samples doped with higher amounts of Nd^(3+).The maximum relative sensitivity at 299 K is 3.00%/K,which is the highest value among the reported Nd^(3+)ions.
基金supported by the National Natural Science Foundation of China (62205072)Natural Science Foundation of Guangxi(2022GXNSFBA035656)+1 种基金Science and Technology Agency of Guangxi (GuikeAD20159054)Education Department of Guangxi (2019KY0004)。
文摘With the increasing demand for non-co ntact fluorescence intensity ratio-based optical thermometry,novel phosphor materials with high-efficiency,dual-emitting centers,and differentiable temperature sensitivity are highly desired,In this wo rk,rare earth Eu^(2+) ions were incorporated Wnto CsCu_(2)I_(3) microcrystals by solidstate reaction,Under a single UV excitation,the as-synthesized samples exhibit two emissions:452 nm blue emission from the 5d→4f transition of Eu^(2+)and 582 nm yellow emission from self-trapped exciton e mission of CsCu_(2)I_(3).The photoluminescence quantum yield reaches to 50%,The dual-band emission of Eu^(2+)-doped CsCu_(2)I_(3) shows different temperature responses in the range of 260-360 K.Based on fluorescence intensity ratio technology,the maximum absolute sensitivity and re Iative sensitivity are 0.091 K^(-1)(at 360 K) and 2.60%/K(at 260 K),respectively.These results suggest that Eu^(2+)-doped GsCu_(2)I_(3) could be a good candidate for highly sensitive optical thermometer.
基金Project supported by the Natural Science Foundation (NSF)of Anhui Province (2108085MB53)the NSF for Distinguished Young Scholars of Anhui University (2022AH020087)University NSF of Anhui Province(KJ2020A0647)。
文摘In this research,a series of Sm^(3+) doped CsLu(WO_(4))_(2) phosphors was prepared via high temperature solid phase technique to design new red phosphors and optical thermometric materials.Their structures,morphology,band gap and luminescence properties were characterized by X-ray diffraction,scanning electron microscopy,diffuse reflection and luminescence spectra,respectively.Under UV excitation,CsLu(WO_(4))_(2) gives rise to a blue broad emission band between 350 and 700 nm,which stems from the ^(3)T_(1u)→^(1)A_(1g) transition of WO_(6)^(6-) groups.When Sm^(3+) is introduced into CsLu(WO_(4))_(2),energy transfer between WO_(6)^(6-) groups and Sm^(3+) ions takes place in CsLu(WO_(4))_(2):Sm^(3+)phosphors,and color-tunable luminescence from blue to red is realized by controlling the Sm^(3+) doping concentration.The energy transfer efficiency between WO_(6)^(6-) groups and Sm^(3+) ons was analyzed,and the energy transfer mechanism was determined to be dipole-dipole interactions.According to the temperature-dependent luminescence spectra,WO_(6)^(6-)groups and Sm^(3+)ions exhibit large discrepancy in thermal quenching rates,and thus the temperature sensing properties of CsLu(WO_(4))_(2):Sm^(3+) in the temperature range of 283-403 K were analyzed.Based on the framework of fluorescence intensity ratio theory,the basic optical thermometry parameters including absolute and relative sensitivity of CsLu(WO_(4))_(2):Sm^(3+) we re calculated and the results show that it has great potential for application in optical thermometry.
基金Project supported by National Natural Science Foundation of China(11974315)Guangdong Science and Technology Innovation Strategy Foundation of China(20190310)。
文摘Herein,we reported novel Y_(4)GeO_(8):Er^(3+),Yb^(3+)phosphors elaborated via conventional solid-state reaction.and we further explored their properties as optical thermometer by using fluorescence intensity ratio(FIR)method complemented by detailed analysis on crystal structure,up-conversion luminescence and energy transfer from Yb^(3+)to Er^(3+).Upon 980 nm laser excitation,Y_(4)GeO_(8):Er^(3+),Yb^(3+)phosphors present525,547 and 659 nm emission bands assigned to the characteristic transitions of Er^(3+).Furthermore,Y_(4)GeO_(8):Er^(3+),Yb^(3+)samples show outstanding temperature sensing performances.To be specific,the minimal temperature resolution is 0.03 K(303 K),and the relative sensitivity of FIR can be up to 1.152%/K(303 K).Hence,Y_(4)GeO_(8):Er^(3+),Yb^(3+)phosphors can be possible candidates for thermometry devices.
基金the National Natural Science Foundation of China(52104272)the Fundamental Research Founds for the Central Universities(2652020020)the Program National Key R&D Program of China(2021YFC1910602-01)。
文摘Herein,we demonstrate an optical thermometer based on single Eu^(2+)doped Ca_(9)Mg_(1.5)(PO_4)_7 phosphors,which were prepared by traditional solid-state reaction technique under a reduction atmosphere.Considerations on the bond length obtained by the crystal structure refinement and the dependent photoluminescence performances allow to assign the two distinct emission bands to Eu^(2+)ions occupied Cal-Ca3 and Mg2 sites.Moreover,the blue and red emitting bands perfectly match with the photosynthetic action spectrum,which can enhance the indoor plant photosynthesis.The optimal doping content of Eu^(2+)ions in this Ca_(9)Mg_(1.5)(PO_(4))_(7)system is 3 mol%.The corresponding concentration quenching effect is verified as dipole-dipole interaction with the critical distance of 3.315 nm.Furthermore,by exploiting the fluorescence intensity technique,the optical thermal resistance properties of Ca_(9)Mg_(1.5)(PO_4)_7:Eu^(2+)are identified based on the temperature dependent emission spectra in a range of 303-523 K.In detail,the maximum absolute and relative sensitivity S_(a)and S_(r)of Ca_9Mg_(1.5)(PO_(4))_(7):Eu^(2+)thermometer are as high as 0.637%/K and 0.3155 K^(-1),respectively.Consequently,the Eu^(2+)doped Ca_(9)Mg_(1.5)(PO_(4))_(7)phosphors establish a bifunctional platfo rm for both optical the rmometer and plant growth lighting via multi-site occupancies.
基金Project supported by the Council of Scientific and Industrial Research(CSIR),New Delhi,India(03(1354)/16/EMR-Ⅱ)。
文摘The crystal structure and surface morphology of the Er^(3+)/Yb^(3+)/Na+:ZnWO_(4) phosphors synthesized by solid state reaction method were analyzed by X-ray diffraction(XRD) and field emission scanning electron microscopy(FESEM) analysis.The frequency upconversion(UC) emission study in the developed phosphors was investigated by using 980 nm laser diode excitation.The effect of codoping in the Er^(3+):ZnWO_(4) phosphors on the UC emission intensity was studied.The UC emission bands that are exhibited in the blue(490 nm),green(530,552 nm),red(668 nm) and NIR(800 nm) region correspond to the ^(4)F_(7/2)→^(4)I_(15/2).^(2)H_(11/2),^(4)S_(3/2)→^(4)I_(15/2),^(4)F_(9/2)→^(4)I_(15/2) and ^(4)I9/2→^(4)I_(15/2) transitions,respectively.The temperature sensing performance of the Er^(3+)-Yb^(3+)-Na+:ZnWO_(4) phosphors was investigated based on the 2 H_(11/2)→^(4)I_(15/2) and ^(4)S_(3/2)→^(4)I_(15/2) thermally coupled transitions of the Er^(3+)ions.The photometric study was also carried out for the developed phosphors.
基金Project supported by the National Natural Science Foundation of China (Grant No 60477023)the Natural Science Foundation of Science and Technology Commission of Liaoning Province, China (Grant No 20062137)
文摘The green and red up-conversion emissions centred at about 534, 549 and 663 nm of wavelength, corresponding respectively to the ^2H11/2 → ^4I15/2, ^4S3/2 → ^4I15/2 and ^4F9/2 → ^4I15/2 transitions of Er^3＋ ions, have been observed for the Er^3＋-doped silicate glass excited by a 978 nm semiconductor laser beam. Excitation power dependent behaviour of the up-conversion emission intensity indicates that a two-photon absorption up-conversion process is responsible for the green and red up-conversion emissions. The temperature dependence of the green up-conversion emissions is also studied in a temperature range of 296-673 K, which shows that Er^3＋-doped silicate glass can be used as a sensor in high-temperature measurement.
基金the National Natural Science Foundations of China(51872269,51672257)the Fundamental Research Fund for the Central Universities(2652019132)Guangdong Innovation Research Team for Higher Education(2017KCXTD030)。
文摘Tb^(3+),Dy^(3+)-co-doped Ca_(9)Tb_(x)Dy_(1-x)(PO_(4))_(5)(SiO_(4))F_(2) phosphors were prepared via high-temperature solidphase reaction method and the potential application in optical temperature measurements due to their color-tunable property was investigated in detail.The photoluminescence emission(PL) and photoluminescence excitation(PLE) spectra results show that the as-prepared phosphors exhibit both Tb^(3+) and Dy^(3+) emissions at 546 nm(^(5)D_(4)-^(7)F_(5) transition of Tb^(3+)) and 587 nm(^(4)F_(9/2)-^(6)H_(13/2) transition of Dy^(3+)) upon 376 nm excitation,respectively.In addition,the fluorescence decay analysis shows that the lifetime of the Tb3+emission rapidly decreases,which confirms the energy transfer existence between Dy^(3+) and Tb^(3+).Under 376 nm excitation,the temperature dependence of the fluorescence intensity ratios for the dualmission bands peaked at 546 and 587 nm was studied in the temperature range from 303 to 573 K.The results show that with the increase of Dy^(3+) concentration,the relative sensitivity first increases and then decreases,what’s more,the maximum relative sensitivity is 3.142×10^(-3)%/K for Ca_(9)Tb_(x)Dy_(1-x)(PO_(4))_(5)(SiO_(4))F_(2)(x=0.4).As a consequence,this preliminary study provides a novel method for exploring the novel thermo meters.
文摘A new and practical fluorescence temperature detecting system based on fluorescence intensity ratio was proposed . The background theory of fluorescence intensity-ratio method was presented simply. And the characters of rare earth doped samples were detailed. The erbium-doped fiber was chosen as the sensing element. The energy levels of 2H11/2 and 4S3/2 are responsible for the emission of radiation at approximately 530 and 555 nm. The erbium-doped (960 ppm) fiber of length 20 cm and core diameter 3.2μm was used as the sensing part. A silica photodiode transfers the fluorescence signal to electric signal, then the ratio of the average of the two different signals was calculated by the computer and the temperature was obtained. The ratio R of the intensity resulting from the transition between the two levels varies proportionly with temperature interval from 293 K to 373 K. The sensitivity of the sensor is approximately 0.05 K-1.
基金supported by the Natural Scientific Foundation of China (Nos.40825004,40971252,41301544)the Water Pollution Control and Management Project (No.2012ZX07101-010)the Shandong Province Natural Science Foundation of China (No.ZR2012DQ003)
文摘Preliminary characterization of bound extracellular polymeric substances（bEPS） of cyanobacteria is crucial to obtain a better understanding of the formation mechanism of cyanobacterial bloom. However,the characterization of bEPS can be affected by extraction methods. Five sets（including the control） of bEPS from Microcystis extracted by different methods were characterized using three-dimensional excitation and emission matrix（3DEEM） fluorescence spectroscopy combined chemical spectrophotometry; and the characterization results of bEPS samples were further compared. The agents used for extraction were NaOH,pure water and phosphate buffered saline（PBS） containing cationic exchange resins,and hot water. Extraction methods affected the fluorescence signals and intensities in the bEPS. Five fluorescence peaks were observed in the excitation and emission matrix fluorescence spectra of bEPS samples. Two peaks（peaks T1 and T2） present in all extractions were identified as protein-like fluorophores,two（peaks A and C） as humic-like fluorophores,and one（peak E） as a fulvic-like substance.Among these substances,the humic-like and fulvic-like fluorescences were only seen in the bEPS extracted with hot water. Also,NaOH solution extraction could result in strong fluorescence intensities compared to the other extraction methods. It was suggested that NaOH at pH 10.0 was the most appropriate method to extract bEPS from Microcystis. In addition,dialysis could affect the yields and characteristics of extracted bEPS during the determination process. These results will help us to explore the issues of cyanobacterial blooms.
