In this paper,an integrated estimation guidance and control(IEGC)system is designed based on the command filtered backstepping approach for circular field-of-view(FOV)strapdown missiles.The threedimensional integrated...In this paper,an integrated estimation guidance and control(IEGC)system is designed based on the command filtered backstepping approach for circular field-of-view(FOV)strapdown missiles.The threedimensional integrated estimation guidance and control nonlinear model with limited actuator deflection angle is established considering the seeker's FOV constraint.The boundary time-varying integral barrier Lyapunov function(IBLF)is employed in backstepping design to constrain the body line-of-sight(BLOS)in IEGC system to fit a circular FOV.Then,the nonlinear adaptive controller is designed to estimate the changing aerodynamic parameters.The generalized extended state observer(GESO)is designed to estimate the acceleration of the maneuvering targets and the unmatched time-varying disturbances for improving tracking accuracy.Furthermore,the command filters are used to solve the"differential expansion"problem during the backstepping design.The Lyapunov theory is used to prove the stability of the overall closed-loop IEGC system.Finally,the simulation results validate the integrated system's effectiveness,achieving high accuracy strikes against maneuvering targets.展开更多
TiAIN]Cu nanocomposite coatings with Cu concentration of 0-1.4 at.% were deposited on the high- speed steel （HSS） substrates by filtered cathodic arc ion plating technique. The chemical composition, microstructure, ...TiAIN]Cu nanocomposite coatings with Cu concentration of 0-1.4 at.% were deposited on the high- speed steel （HSS） substrates by filtered cathodic arc ion plating technique. The chemical composition, microstructure, morphology, adhesion strength, mechanical and tribological properties of the TiAIN/Cu coatings were characterized and analyzed. The results reveal that the coating structure and properties depend on not only the Cu concentration, hut also the deposition condition. The addition of Cu significantly decreases the grain size and weakens the texture in the TiAlN/Cu coatings. With increasing the Cu concentration, the coating hardness decreases slightly from 30.7 GPa of the pure TiAlN coating to 28.5 GPa of the TiAlN/Cu coating with 1.4 at,% Cu. All the TiAlN/Cu coatings present sufficient adhesion strength. In addition, the existing state of additive Cu in the TiAlN/Cu coatings is also investigated.展开更多
The difficulty in solving stochastic dynamics problems lies in the need for a large number of repeated computations of deterministic dynamic equations,which has been a challenge in stochastic dynamics analysis and was...The difficulty in solving stochastic dynamics problems lies in the need for a large number of repeated computations of deterministic dynamic equations,which has been a challenge in stochastic dynamics analysis and was discussed in this study.To efficiently and accurately compute the exponential of the dynamics state matrix and the matrix functions due to external loads,an adaptively filtered precise integration method was proposed,which inherits the high precision of the precise integrationmethod,improves the computational efficiency and saves the memory required.Moreover,the perturbation method was introduced to avoid repeated computations of matrix exponential and terms due to external loads.Based on the filtering and perturbation techniques,an adaptively filtered precise integration method considering perturbation for stochastic dynamics problems was developed.Two numerical experiments,including a model of phononic crystal and a bridge model considering random parameters,were performed to test the performance of the proposed method in terms of accuracy and efficiency.Numerical results show that the accuracy and efficiency of the proposed method are better than those of the existing precise integration method,the Newmark-βmethod and the Wilson-θmethod.展开更多
Laminar methane/air premixed flames at different pressures in a newly developed high-pressure laminar burner are studied through Cantera simulation and filtered Rayleigh scattering(FRS).Different gas component fractio...Laminar methane/air premixed flames at different pressures in a newly developed high-pressure laminar burner are studied through Cantera simulation and filtered Rayleigh scattering(FRS).Different gas component fractions are obtained through the detailed numerical simulations.And this approach can be used to correct the FRS images of large variations in a Rayleigh cross section in different flame regimes.The temperature distribution above the flat burner is then presented without stray light interference from soot and wall reflection.Results also show that the extent of agreement with the single point measurement by the thermocouple is<6%.Finally,this study concludes that the relative uncertainty of the presented filtered Rayleigh scattering diagnostics is estimated to be below 10%in single-shot imaging.展开更多
The filtered cathodic vacuum-arc (FCVA) technique is a supplementary and alterna tive technique with respect to convendtional physical and chemical vapour deposi tion which can remove macro-particles effectively and m...The filtered cathodic vacuum-arc (FCVA) technique is a supplementary and alterna tive technique with respect to convendtional physical and chemical vapour deposi tion which can remove macro-particles effectively and make the deposition proces s at ambient temperature. In this work, high quality TiN thin films were deposi ted on silicon substrates at low temperature using the improved filtered cathodi c arc plasma (FCAP) technique. AFM, XRD, TEM were employed to characterize the T iN thin films. The effects of the negative substrate bias on the grain size, pre ferred crystalline orientation, surface roughness of TiN thin films were discuss ed.展开更多
Nanometer TiN/AlN multilayers were prepared on silicon substrate by filtered vacuum arc deposition.The structures of the nanometer TiN/AlN multilayer were studied by using X-ray diffraction. The 12 nm TiN/AlN multipla...Nanometer TiN/AlN multilayers were prepared on silicon substrate by filtered vacuum arc deposition.The structures of the nanometer TiN/AlN multilayer were studied by using X-ray diffraction. The 12 nm TiN/AlN multiplayer is composed of cubic TiN structure and hexagonal wurzite AlN structure, but the 2 nm period multilayer is composed of face centered cubic structure TiN and AlN with strong (200) texture. The surface roughness, hardness and elastic modulus of multilayer are dependent on the period of multilayer. The hardness of the TiN/AlN multilayers is higher than that suggested by a simple rule of mixture. The peaking hardness of nanometer TiN/AlN multilayers at period of 2 nm is about 42 GPa, much higher than that of 12 nm. The wear resistance of the nanometer TiN/AlN multilayers was also studied.展开更多
This paper describes the implementation of frequency-domain least mean squares (LMS) and Filtered-X algorithms and compares the performance of the frequencydomain adaptive control algorithm to a comparable timedomain ...This paper describes the implementation of frequency-domain least mean squares (LMS) and Filtered-X algorithms and compares the performance of the frequencydomain adaptive control algorithm to a comparable timedomain controller. When the frequency-domain LMS step size is allowed to vary as a function of frequency,the frequency-domain algorithm exhibits a better vibration reduction than the time-domain algorithm for the weaker frequencies in the energy spectrum.展开更多
In this paper, the analysis method of stochastic response of piled offshore platform excited by stationary filtered white noise is presented. With this method, the strong ground motion is considered as three direction...In this paper, the analysis method of stochastic response of piled offshore platform excited by stationary filtered white noise is presented. With this method, the strong ground motion is considered as three direction stationary filtered white noise process, the theoretic solutions of three special integration equations are derived with the residue theorem, and the expression of response nodal displacements and member forces of offshore platform excited by the stationary filtered white noise is put forward. The stochastic response of a piled offshore platform excited by the stationary filtered white noise, which is located 114.3 m in water depth, is computed. The results are compared with those obtained with the response spectrum analysis method and the stationary white noise model analysis method, and the corresponding conclusion is drawn.展开更多
Characteristics of a premixed, swirl methane/air diffusion flame at atmospheric pressure are measured by filtered Rayleigh scattering(FRS). Three operating conditions are investigated with the equivalence ratios of th...Characteristics of a premixed, swirl methane/air diffusion flame at atmospheric pressure are measured by filtered Rayleigh scattering(FRS). Three operating conditions are investigated with the equivalence ratios of the methane/air flame covering a range of 0.67–0.83. Under each condition, single-shot and averaged FRS images over a region measured 39.3×65.6 mm^(2) at seven cross sections of the flame are collected to demonstrate the flame behavior. A gradient calculation algorithm is applied to identify reaction zone locations and structures in the instantaneous FRS measurements.Statistical analysis for the mean FRS measurements is performed by means of joint probability density functions. The experimental results indicate that thermochemical state of the swirl flame is strongly influenced by equivalence ratio, leading to varieties of flame structures and temperature distributions. The gradient of the instantaneous FRS images clearly illustrates the characteristics of the reaction zone. The results also demonstrate that FRS can provide detailed insights into the behavior of turbulent flames.展开更多
Filtered cathodic vacuum arc(FCVA)deposition is regarded as an important technique for the synthesis of tetrahedral amorphous carbon(ta-C)films due to its high ionization rate,high deposition rate and effective filtra...Filtered cathodic vacuum arc(FCVA)deposition is regarded as an important technique for the synthesis of tetrahedral amorphous carbon(ta-C)films due to its high ionization rate,high deposition rate and effective filtration of macroparticles.Probing the plasma characteristics of arc discharge contributes to understanding the deposition mechanism of ta-C films on a microscopic level.This work focuses on the plasma diagnosis of an FCVA discharge using a Langmuir dualprobe system with a discrete Fourier transform smoothing method.During the ta-C film deposition,the arc current of graphite cathodes and deposition pressure vary from 30 to 90 A and from 0.3 to 0.9 Pa,respectively.The plasma density increases with arc current but decreases with pressure.The carbon plasma density generated by the arc discharge is around the order of10^(10)cm^(-3).The electron temperature varies in the range of 2-3.5 eV.As the number of cathodic arc sources and the current of the focused magnetic coil increase,the plasma density increases.The ratio of the intensity of the D-Raman peak and G-Raman peak(I_(D)/I_(G))of the ta-C films increases with increasing plasma density,resulting in a decrease in film hardness.It is indicated that the mechanical properties of ta-C films depend not only on the ion energy but also on the carbon plasma density.展开更多
For the crystalline temperature of BaSnO_(3)(BTO)was above 650℃,the transparent conductive BTO-based films were always deposited above this temperature on epitaxy substrates by pulsed laser deposition or molecular be...For the crystalline temperature of BaSnO_(3)(BTO)was above 650℃,the transparent conductive BTO-based films were always deposited above this temperature on epitaxy substrates by pulsed laser deposition or molecular beam epitaxy till now which limited there application in low temperature device process.In the article,the microstructure,optical and electrical of BTO and In_(2)O_(3) mixed transparent conductive BaInSnO_(x)(BITO)film deposited by filtered cathodic vacuum arc technique(FCVA)on glass substrate at room temperature were firstly reported.The BITO film with thickness of 300 nm had mainly In_(2)O_(3) polycrystalline phase,and minor polycrystalline BTO phase with(001),(011),(111),(002),(222)crystal faces which were first deposited at room temperature on amorphous glass.The transmittance was 70%–80%in the visible light region with linear refractive index of 1.94 and extinction coefficient of 0.004 at 550-nm wavelength.The basic optical properties included the real and imaginary parts,high frequency dielectric constants,the absorption coefficient,the Urbach energy,the indirect and direct band gaps,the oscillator and dispersion energies,the static refractive index and dielectric constant,the average oscillator wavelength,oscillator length strength,the linear and the third-order nonlinear optical susceptibilities,and the nonlinear refractive index were all calculated.The film was the n-type conductor with sheet resistance of 704.7Ω/□,resistivity of 0.02Ω⋅cm,mobility of 18.9 cm2/V⋅s,and carrier electron concentration of 1.6×10^(19) cm^(−3) at room temperature.The results suggested that the BITO film deposited by FCVA had potential application in transparent conductive films-based low temperature device process.展开更多
To improve the efficiency of operating rooms, reduce the hospital＇ s costs and improve the level of service qualities, a scheduling method is presented based on a filtered-beam-search-based algo- rithm. Firstly, a sc...To improve the efficiency of operating rooms, reduce the hospital＇ s costs and improve the level of service qualities, a scheduling method is presented based on a filtered-beam-search-based algo- rithm. Firstly, a scheduling problem domain is described. Mathematical programming models are al- so set up with an objective function of minimizing related costs of the system. On the basis of the de= scriptions mentioned above, a solving policy of generating feasible scheduling solutions is estab- lished. Combining with the speeific constraints of operation theatres, a filtered-beam-search-based algorithm is put forward to solve scheduling problems. Finally, simulation experiments are designed. The performance of the proposed algorithm is evaluated and compared with that of other approaches through simulations. Results indicate that the proposed algorithm can reduce costs, and are of prac- ticality and effectiveness.展开更多
In this paper we show that if R is a discrete valuation ring, then R is a filtered ring. We prove some properties and relation when R is a discrete valuation ring.
Tungsten carbide films (W-C films) were fabricated on silicon substrates by using the filtered pulse arc deposition (FPAD) method. Two types of cemented tungsten carbide (WC) were used as cathode, one containing Co an...Tungsten carbide films (W-C films) were fabricated on silicon substrates by using the filtered pulse arc deposition (FPAD) method. Two types of cemented tungsten carbide (WC) were used as cathode, one containing Co and the other Ti, which were used as binders for forming the cathode shape. The films were fabricated by varying the pulse arc current and substrate bias voltage. The discharge, deposition and film properties were investigated under these deposition conditions. The cathode wear amount when using WC-Co (WC cathode containing Co) was found to be smaller than that measured when WC-Ti (WC cathode containing Ti) was used. The W-C film thickness was approximately 30 - 40 nm under all conditions, except when the pulse arc current was 50 A and the film thickness, was approximately 10 nm. Compared to the WC-Ti, the consumption of cathode material is suppressed in the WC-Co, indicating that the efficiency for film preparation of the latter is good. From the X-ray diffraction analysis, the crystalline phase of W-C films fabricated using WC-Co and WC-Ti were observed as W2C and WC1-x, respectively, indicating that different crystalline phases could be fabricated using different cathodes. From the X-ray photoelectron spectroscopy analysis, the oxidation layer formed by air exposure was observed to exclusively exist on the W-C film surface. Moreover, almost all oxygen in the oxidation layer bonded with tungsten.展开更多
External filtered neutron beams have been developed at the horizontal radial channels No. 4 of Dalat research reactor. In the material composition of the neutron filters, the primary material components of Iron, Alumi...External filtered neutron beams have been developed at the horizontal radial channels No. 4 of Dalat research reactor. In the material composition of the neutron filters, the primary material components of Iron, Aluminum, Nickel and Vanadium are used to obtain the mono-energetic neutron beams of 24 and 59 keV, with low level of Gamma and slow neutron background. A computer code and Monte-Carlo simulation technique were applied to optimize the filter configurations and to deduce the neutron energy distributions in the filtered beams. A hydrogen-filled proton recoil detector and the activation method with Gold foils were used to measure the neutron energy spectrum and flux of each beam at sample position. The results of experimental neutron fluxes are 6.1 × 105 and 5.3 × 105 n/cm2/s for 24 and 59 keV beams, respectively.展开更多
Composite SiNx/DLC films were deposited on Si substrate by RF magnetron sputtering of silicon nitride (Si3N4) target simultaneously with filtered cathode arc (FCA) of graphite. The RF power was fixed at 100 W whereas ...Composite SiNx/DLC films were deposited on Si substrate by RF magnetron sputtering of silicon nitride (Si3N4) target simultaneously with filtered cathode arc (FCA) of graphite. The RF power was fixed at 100 W whereas the arc currents of FCA were 20, 40, 60 and 80 A. The effects of arc current on the structure, surface roughness, density and mechanical properties of SiNx/DLC films were investigated. The results show that the arc current in the studied range has effect on the structure, surface roughness, density and mechanical properties of composite SiNx/DLC films. The composite SiNx/DLC films show the sp3 content between 53.5% and 66.7%, density between 2.54 and2.98 g/cm3, stress between 1.7 and 2.2 GPa, and hardness between 35 and 51 GPa. Furthermore, it was found that the density, stress and hardness correlate linearly with the sp3 content for composite SiNx/DLC films.展开更多
文摘In this paper,an integrated estimation guidance and control(IEGC)system is designed based on the command filtered backstepping approach for circular field-of-view(FOV)strapdown missiles.The threedimensional integrated estimation guidance and control nonlinear model with limited actuator deflection angle is established considering the seeker's FOV constraint.The boundary time-varying integral barrier Lyapunov function(IBLF)is employed in backstepping design to constrain the body line-of-sight(BLOS)in IEGC system to fit a circular FOV.Then,the nonlinear adaptive controller is designed to estimate the changing aerodynamic parameters.The generalized extended state observer(GESO)is designed to estimate the acceleration of the maneuvering targets and the unmatched time-varying disturbances for improving tracking accuracy.Furthermore,the command filters are used to solve the"differential expansion"problem during the backstepping design.The Lyapunov theory is used to prove the stability of the overall closed-loop IEGC system.Finally,the simulation results validate the integrated system's effectiveness,achieving high accuracy strikes against maneuvering targets.
基金supported by the National Key Basic Research Program of China(“973”Program,No.2012CB625100)the Natural Science Foundation of Liaoning Province(No.2013020093)
文摘TiAIN]Cu nanocomposite coatings with Cu concentration of 0-1.4 at.% were deposited on the high- speed steel （HSS） substrates by filtered cathodic arc ion plating technique. The chemical composition, microstructure, morphology, adhesion strength, mechanical and tribological properties of the TiAIN/Cu coatings were characterized and analyzed. The results reveal that the coating structure and properties depend on not only the Cu concentration, hut also the deposition condition. The addition of Cu significantly decreases the grain size and weakens the texture in the TiAlN/Cu coatings. With increasing the Cu concentration, the coating hardness decreases slightly from 30.7 GPa of the pure TiAlN coating to 28.5 GPa of the TiAlN/Cu coating with 1.4 at,% Cu. All the TiAlN/Cu coatings present sufficient adhesion strength. In addition, the existing state of additive Cu in the TiAlN/Cu coatings is also investigated.
基金the support of the National Natural Science Foundation of China(Grant Nos.11472067 and 51609034)the Science Foundation of Liaoning Province of China(No.2021-MS-119)+1 种基金the Dalian Youth Science and Technology Star Project(No.2018RQ06)the Fundamental Research Funds for the Central Universities(Grant No.DUT20GJ216).
文摘The difficulty in solving stochastic dynamics problems lies in the need for a large number of repeated computations of deterministic dynamic equations,which has been a challenge in stochastic dynamics analysis and was discussed in this study.To efficiently and accurately compute the exponential of the dynamics state matrix and the matrix functions due to external loads,an adaptively filtered precise integration method was proposed,which inherits the high precision of the precise integrationmethod,improves the computational efficiency and saves the memory required.Moreover,the perturbation method was introduced to avoid repeated computations of matrix exponential and terms due to external loads.Based on the filtering and perturbation techniques,an adaptively filtered precise integration method considering perturbation for stochastic dynamics problems was developed.Two numerical experiments,including a model of phononic crystal and a bridge model considering random parameters,were performed to test the performance of the proposed method in terms of accuracy and efficiency.Numerical results show that the accuracy and efficiency of the proposed method are better than those of the existing precise integration method,the Newmark-βmethod and the Wilson-θmethod.
基金Project supported by the National Natural Science Foundation of China(Grant No.91641118)the Fenglei Youth Innovation Fund of China Aerodynamics and Research Development Center,China(Grant Nos.FLYIF20160017 and PJD20180131).
文摘Laminar methane/air premixed flames at different pressures in a newly developed high-pressure laminar burner are studied through Cantera simulation and filtered Rayleigh scattering(FRS).Different gas component fractions are obtained through the detailed numerical simulations.And this approach can be used to correct the FRS images of large variations in a Rayleigh cross section in different flame regimes.The temperature distribution above the flat burner is then presented without stray light interference from soot and wall reflection.Results also show that the extent of agreement with the single point measurement by the thermocouple is<6%.Finally,this study concludes that the relative uncertainty of the presented filtered Rayleigh scattering diagnostics is estimated to be below 10%in single-shot imaging.
基金This work was supported by the National Natural Science Foundation of China(No.10074022)the Excellent Young Teachers Prograom of MOE,China.
文摘The filtered cathodic vacuum-arc (FCVA) technique is a supplementary and alterna tive technique with respect to convendtional physical and chemical vapour deposi tion which can remove macro-particles effectively and make the deposition proces s at ambient temperature. In this work, high quality TiN thin films were deposi ted on silicon substrates at low temperature using the improved filtered cathodi c arc plasma (FCAP) technique. AFM, XRD, TEM were employed to characterize the T iN thin films. The effects of the negative substrate bias on the grain size, pre ferred crystalline orientation, surface roughness of TiN thin films were discuss ed.
基金Project(50141022) supported by the National Natural Science Foundation of China
文摘Nanometer TiN/AlN multilayers were prepared on silicon substrate by filtered vacuum arc deposition.The structures of the nanometer TiN/AlN multilayer were studied by using X-ray diffraction. The 12 nm TiN/AlN multiplayer is composed of cubic TiN structure and hexagonal wurzite AlN structure, but the 2 nm period multilayer is composed of face centered cubic structure TiN and AlN with strong (200) texture. The surface roughness, hardness and elastic modulus of multilayer are dependent on the period of multilayer. The hardness of the TiN/AlN multilayers is higher than that suggested by a simple rule of mixture. The peaking hardness of nanometer TiN/AlN multilayers at period of 2 nm is about 42 GPa, much higher than that of 12 nm. The wear resistance of the nanometer TiN/AlN multilayers was also studied.
文摘This paper describes the implementation of frequency-domain least mean squares (LMS) and Filtered-X algorithms and compares the performance of the frequencydomain adaptive control algorithm to a comparable timedomain controller. When the frequency-domain LMS step size is allowed to vary as a function of frequency,the frequency-domain algorithm exhibits a better vibration reduction than the time-domain algorithm for the weaker frequencies in the energy spectrum.
文摘In this paper, the analysis method of stochastic response of piled offshore platform excited by stationary filtered white noise is presented. With this method, the strong ground motion is considered as three direction stationary filtered white noise process, the theoretic solutions of three special integration equations are derived with the residue theorem, and the expression of response nodal displacements and member forces of offshore platform excited by the stationary filtered white noise is put forward. The stochastic response of a piled offshore platform excited by the stationary filtered white noise, which is located 114.3 m in water depth, is computed. The results are compared with those obtained with the response spectrum analysis method and the stationary white noise model analysis method, and the corresponding conclusion is drawn.
基金Project supported by National Science and Technology Major Projects of China (Grant No. J2019-V-005-0096)。
文摘Characteristics of a premixed, swirl methane/air diffusion flame at atmospheric pressure are measured by filtered Rayleigh scattering(FRS). Three operating conditions are investigated with the equivalence ratios of the methane/air flame covering a range of 0.67–0.83. Under each condition, single-shot and averaged FRS images over a region measured 39.3×65.6 mm^(2) at seven cross sections of the flame are collected to demonstrate the flame behavior. A gradient calculation algorithm is applied to identify reaction zone locations and structures in the instantaneous FRS measurements.Statistical analysis for the mean FRS measurements is performed by means of joint probability density functions. The experimental results indicate that thermochemical state of the swirl flame is strongly influenced by equivalence ratio, leading to varieties of flame structures and temperature distributions. The gradient of the instantaneous FRS images clearly illustrates the characteristics of the reaction zone. The results also demonstrate that FRS can provide detailed insights into the behavior of turbulent flames.
基金supported by the National Key Research and Development Program of China(No.2016YFB0101206)the Science and Technology Program of Wuhu(No.2021hg11)the Natural Science Foundation of the Anhui Higher Education in Institutions of China(No.2022AH050300)。
文摘Filtered cathodic vacuum arc(FCVA)deposition is regarded as an important technique for the synthesis of tetrahedral amorphous carbon(ta-C)films due to its high ionization rate,high deposition rate and effective filtration of macroparticles.Probing the plasma characteristics of arc discharge contributes to understanding the deposition mechanism of ta-C films on a microscopic level.This work focuses on the plasma diagnosis of an FCVA discharge using a Langmuir dualprobe system with a discrete Fourier transform smoothing method.During the ta-C film deposition,the arc current of graphite cathodes and deposition pressure vary from 30 to 90 A and from 0.3 to 0.9 Pa,respectively.The plasma density increases with arc current but decreases with pressure.The carbon plasma density generated by the arc discharge is around the order of10^(10)cm^(-3).The electron temperature varies in the range of 2-3.5 eV.As the number of cathodic arc sources and the current of the focused magnetic coil increase,the plasma density increases.The ratio of the intensity of the D-Raman peak and G-Raman peak(I_(D)/I_(G))of the ta-C films increases with increasing plasma density,resulting in a decrease in film hardness.It is indicated that the mechanical properties of ta-C films depend not only on the ion energy but also on the carbon plasma density.
基金Project supported by the Enterprise Science and Technology Correspondent for Guangdong Province,China (Grant No.GDKTP2021015200)。
文摘For the crystalline temperature of BaSnO_(3)(BTO)was above 650℃,the transparent conductive BTO-based films were always deposited above this temperature on epitaxy substrates by pulsed laser deposition or molecular beam epitaxy till now which limited there application in low temperature device process.In the article,the microstructure,optical and electrical of BTO and In_(2)O_(3) mixed transparent conductive BaInSnO_(x)(BITO)film deposited by filtered cathodic vacuum arc technique(FCVA)on glass substrate at room temperature were firstly reported.The BITO film with thickness of 300 nm had mainly In_(2)O_(3) polycrystalline phase,and minor polycrystalline BTO phase with(001),(011),(111),(002),(222)crystal faces which were first deposited at room temperature on amorphous glass.The transmittance was 70%–80%in the visible light region with linear refractive index of 1.94 and extinction coefficient of 0.004 at 550-nm wavelength.The basic optical properties included the real and imaginary parts,high frequency dielectric constants,the absorption coefficient,the Urbach energy,the indirect and direct band gaps,the oscillator and dispersion energies,the static refractive index and dielectric constant,the average oscillator wavelength,oscillator length strength,the linear and the third-order nonlinear optical susceptibilities,and the nonlinear refractive index were all calculated.The film was the n-type conductor with sheet resistance of 704.7Ω/□,resistivity of 0.02Ω⋅cm,mobility of 18.9 cm2/V⋅s,and carrier electron concentration of 1.6×10^(19) cm^(−3) at room temperature.The results suggested that the BITO film deposited by FCVA had potential application in transparent conductive films-based low temperature device process.
基金Supported by the National Natural Science Foundation of China(No.61273035,71471135)
文摘To improve the efficiency of operating rooms, reduce the hospital＇ s costs and improve the level of service qualities, a scheduling method is presented based on a filtered-beam-search-based algo- rithm. Firstly, a scheduling problem domain is described. Mathematical programming models are al- so set up with an objective function of minimizing related costs of the system. On the basis of the de= scriptions mentioned above, a solving policy of generating feasible scheduling solutions is estab- lished. Combining with the speeific constraints of operation theatres, a filtered-beam-search-based algorithm is put forward to solve scheduling problems. Finally, simulation experiments are designed. The performance of the proposed algorithm is evaluated and compared with that of other approaches through simulations. Results indicate that the proposed algorithm can reduce costs, and are of prac- ticality and effectiveness.
文摘In this paper we show that if R is a discrete valuation ring, then R is a filtered ring. We prove some properties and relation when R is a discrete valuation ring.
文摘Tungsten carbide films (W-C films) were fabricated on silicon substrates by using the filtered pulse arc deposition (FPAD) method. Two types of cemented tungsten carbide (WC) were used as cathode, one containing Co and the other Ti, which were used as binders for forming the cathode shape. The films were fabricated by varying the pulse arc current and substrate bias voltage. The discharge, deposition and film properties were investigated under these deposition conditions. The cathode wear amount when using WC-Co (WC cathode containing Co) was found to be smaller than that measured when WC-Ti (WC cathode containing Ti) was used. The W-C film thickness was approximately 30 - 40 nm under all conditions, except when the pulse arc current was 50 A and the film thickness, was approximately 10 nm. Compared to the WC-Ti, the consumption of cathode material is suppressed in the WC-Co, indicating that the efficiency for film preparation of the latter is good. From the X-ray diffraction analysis, the crystalline phase of W-C films fabricated using WC-Co and WC-Ti were observed as W2C and WC1-x, respectively, indicating that different crystalline phases could be fabricated using different cathodes. From the X-ray photoelectron spectroscopy analysis, the oxidation layer formed by air exposure was observed to exclusively exist on the W-C film surface. Moreover, almost all oxygen in the oxidation layer bonded with tungsten.
文摘External filtered neutron beams have been developed at the horizontal radial channels No. 4 of Dalat research reactor. In the material composition of the neutron filters, the primary material components of Iron, Aluminum, Nickel and Vanadium are used to obtain the mono-energetic neutron beams of 24 and 59 keV, with low level of Gamma and slow neutron background. A computer code and Monte-Carlo simulation technique were applied to optimize the filter configurations and to deduce the neutron energy distributions in the filtered beams. A hydrogen-filled proton recoil detector and the activation method with Gold foils were used to measure the neutron energy spectrum and flux of each beam at sample position. The results of experimental neutron fluxes are 6.1 × 105 and 5.3 × 105 n/cm2/s for 24 and 59 keV beams, respectively.
文摘Composite SiNx/DLC films were deposited on Si substrate by RF magnetron sputtering of silicon nitride (Si3N4) target simultaneously with filtered cathode arc (FCA) of graphite. The RF power was fixed at 100 W whereas the arc currents of FCA were 20, 40, 60 and 80 A. The effects of arc current on the structure, surface roughness, density and mechanical properties of SiNx/DLC films were investigated. The results show that the arc current in the studied range has effect on the structure, surface roughness, density and mechanical properties of composite SiNx/DLC films. The composite SiNx/DLC films show the sp3 content between 53.5% and 66.7%, density between 2.54 and2.98 g/cm3, stress between 1.7 and 2.2 GPa, and hardness between 35 and 51 GPa. Furthermore, it was found that the density, stress and hardness correlate linearly with the sp3 content for composite SiNx/DLC films.
