Converting sunlight directly to fuels and chemicals is a great latent capacity for storing renewable energy.Due to the advantages of large surface area,short diffusion paths for electrons,and more exposed active sites...Converting sunlight directly to fuels and chemicals is a great latent capacity for storing renewable energy.Due to the advantages of large surface area,short diffusion paths for electrons,and more exposed active sites,few‐layer carbon nitride(FLCN)materials present great potential for production of solar fuels and chemicals and set off a new wave of research in the last few years.Herein,the recent progress in synthesis and regulation of FLCN‐based photocatalysts,and their applications in the conversion of sunlight into fuels and chemicals,is summarized.More importantly,the regulation strategies from chemical modification to microstructure control toward the production of solar fuels and chemicals has been deeply analyzed,aiming to inspire critical thinking about the effective approaches for photocatalyst modification rather than developing new materials.At the end,the key scientific challenges and some future trend of FLCN‐based materials as advanced photocatalysts are also discussed.展开更多
Carbon and few-layer MoS2 nanosheets co- modified TiO2 nanocomposites （defined as MoS2-C@TiO2） were prepared through a facile one-step pyrolysis reaction technique. In this unique nanostructure, the TiO2 nanosh- eet...Carbon and few-layer MoS2 nanosheets co- modified TiO2 nanocomposites （defined as MoS2-C@TiO2） were prepared through a facile one-step pyrolysis reaction technique. In this unique nanostructure, the TiO2 nanosh- eets with stable structure serve as the backbones, and carbon coating and few-layer MoS2 tightly adhere onto the surface of the TiO2. It needs to be pointed out that the carbon coating improves the overall electronic conductivity and the few-layer MoS2 facilitates the diffusion of lithium ions and offers more active sites for lithium-ion storage. As a result, when evaluated as lithium-ion battery anodes, the MoS2-C@TiO2 nanocomposites exhibit markedly enhanced lithium storage capability compared with pure TiO2. A high specific capacity of 180 mA.h.g-1 has been achieved during the preliminary cycles, and the specific capacity can maintain 160 mA.h.g-1 at a high current density of 1C （1C=167 mA.g-1） even after 300 discharge/ charge cycles, indicating the great potential of the MoS2- C@TiO2 on energy storage.展开更多
Currently,developing supercapacitors with robust cycle stability and suitability for wide-temperature-range operations is still a huge challenge.In the present work,few-layer hexagonal boron nitride nanosheets(h-BNNSs...Currently,developing supercapacitors with robust cycle stability and suitability for wide-temperature-range operations is still a huge challenge.In the present work,few-layer hexagonal boron nitride nanosheets(h-BNNSs)with a thickness of 2−4 atomic layers were fabricated via vacuum freeze-drying and nitridation.Then,the h-BNNSs/reduced graphene oxide(rGO)composite were further prepared using a hydrothermal method.Due to the combination of two two-dimensional(2D)van der Waals-bonded materials,the as-prepared h-BNNSs/rGO electrode exhibited robustness to wide-temperature-range operations from−10 to 50℃.When the electrodes worked in a neutral aqueous electrolyte(1 M Na2SO4),they showed a great stable cycling performance with almost 107%reservation of the initial capacitance at 0℃ and 111% at 50℃ for 5000 charge−discharge cycles.展开更多
The hexagonal boron nitrides （BNs） with different morphologies are synthesized on a large scale by a simple route using a two-step synthetic process. The morphology of h-BN can be easily controlled by changing the h...The hexagonal boron nitrides （BNs） with different morphologies are synthesized on a large scale by a simple route using a two-step synthetic process. The morphology of h-BN can be easily controlled by changing the heat-treatment atmosphere. The whiskers with 0.5-10 μm in diameter and 50-100 μm in length consist of few-layers nanosheets in the NH3 gas. The BN nanosheets can be dissociated from the whiskers by ultrasonic treatment, which are less than 5 nm in thickness and even only two layers thick. The concentration and activity of N play an important rule, and abundant N and higher activity are conducive for refining grain in reaction. The H3BO3 and C3N6H6 molecules form a layer-like morphology with the interlinked planar triangle by a hydrogen-bonded structure.展开更多
High-quality graphene flakes have long been desirable for numerous applications including energy stor- age, printable electronics, and catalysis. In this contribution, we report a green, efficient, facile gas-driven e...High-quality graphene flakes have long been desirable for numerous applications including energy stor- age, printable electronics, and catalysis. In this contribution, we report a green, efficient, facile gas-driven exfoliation process for the preparation of high-quality graphene in large scale. The gas exfoliation process was realized by the interplay between the expansion of interlayer at high temperature and the gasifi- cation of liquid nitrogen within the interlayer. Detailed experiments demonstrated that the higher tem- perature was critical to the formation of fewer layers. The exfoliated graphene was proved to be of high quality. We further investigated the electrochemical behavior of this exfoliated graphene. As a result, this few-layered graphene demonstrated an enhanced capability as a supercapacitor, much higher than its counterpart parent material.展开更多
Few-layer graphene grown on Ni thin films has been studied by scanning tunneling microscopy. In most areas on the surfaces, moir6 patterns resulted from rotational stacking faults were observed. At a bias lower than 2...Few-layer graphene grown on Ni thin films has been studied by scanning tunneling microscopy. In most areas on the surfaces, moir6 patterns resulted from rotational stacking faults were observed. At a bias lower than 200 mV, only one sublattice shows up in regions without moir6 patterns while both sublattices are seen in regions with moir6 pattens. This phenomenon can be used to identify AB stacked regions. The scattering characteristics at various types of step edges are different from those of monolayer graphene edges, either armchair or zigzag.展开更多
The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experim...The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experiments, and used to investigate the principal effects of the process parameters such as plasma density, electron temperature, surface temperature and time of growth on the size and structure of the plasma-grown graphene flakes. It was demonstrated that the higher growth temperatures result in larger graphene flakes reaching 5 μm, and simultaneously, lead to much lower density of the carbon atoms adsorbed on the flake surface. The low density of the carbon adatoms reduces the probability of the additional graphene layer nucleation on surface of growing flake, thus eventually resulting in the synthesis of the most valuable single-layered graphenes.展开更多
文摘Converting sunlight directly to fuels and chemicals is a great latent capacity for storing renewable energy.Due to the advantages of large surface area,short diffusion paths for electrons,and more exposed active sites,few‐layer carbon nitride(FLCN)materials present great potential for production of solar fuels and chemicals and set off a new wave of research in the last few years.Herein,the recent progress in synthesis and regulation of FLCN‐based photocatalysts,and their applications in the conversion of sunlight into fuels and chemicals,is summarized.More importantly,the regulation strategies from chemical modification to microstructure control toward the production of solar fuels and chemicals has been deeply analyzed,aiming to inspire critical thinking about the effective approaches for photocatalyst modification rather than developing new materials.At the end,the key scientific challenges and some future trend of FLCN‐based materials as advanced photocatalysts are also discussed.
基金financially supported by the National Natural Science Foundation of China(No.51472177)the China-EU Science and Technology Cooperation Project(No.SQ2013ZOA100006)
文摘Carbon and few-layer MoS2 nanosheets co- modified TiO2 nanocomposites （defined as MoS2-C@TiO2） were prepared through a facile one-step pyrolysis reaction technique. In this unique nanostructure, the TiO2 nanosh- eets with stable structure serve as the backbones, and carbon coating and few-layer MoS2 tightly adhere onto the surface of the TiO2. It needs to be pointed out that the carbon coating improves the overall electronic conductivity and the few-layer MoS2 facilitates the diffusion of lithium ions and offers more active sites for lithium-ion storage. As a result, when evaluated as lithium-ion battery anodes, the MoS2-C@TiO2 nanocomposites exhibit markedly enhanced lithium storage capability compared with pure TiO2. A high specific capacity of 180 mA.h.g-1 has been achieved during the preliminary cycles, and the specific capacity can maintain 160 mA.h.g-1 at a high current density of 1C （1C=167 mA.g-1） even after 300 discharge/ charge cycles, indicating the great potential of the MoS2- C@TiO2 on energy storage.
基金financially supported by the National Natural Science Foundation for Excellent Young Scholars of China (No. 51522402)the National Postdoctoral Program for Innovative Talents of China (No. BX20180034)+2 种基金the National Natural Science Foundation of China (No. 51902020)the Fundamental Research Funds for the Central Universities (No. FRF-TP-18-045A1)the China Postdoctoral Science Foundation (No. 2018M641192)
文摘Currently,developing supercapacitors with robust cycle stability and suitability for wide-temperature-range operations is still a huge challenge.In the present work,few-layer hexagonal boron nitride nanosheets(h-BNNSs)with a thickness of 2−4 atomic layers were fabricated via vacuum freeze-drying and nitridation.Then,the h-BNNSs/reduced graphene oxide(rGO)composite were further prepared using a hydrothermal method.Due to the combination of two two-dimensional(2D)van der Waals-bonded materials,the as-prepared h-BNNSs/rGO electrode exhibited robustness to wide-temperature-range operations from−10 to 50℃.When the electrodes worked in a neutral aqueous electrolyte(1 M Na2SO4),they showed a great stable cycling performance with almost 107%reservation of the initial capacitance at 0℃ and 111% at 50℃ for 5000 charge−discharge cycles.
基金Project supported by the National Natural Science Foundation of China(Grant No.11504266)the Tianjin Natural Science Foundation,China(Grant No.17JCQNJC02300)the National Key Foundation for Exploring Scientific Instrument,China(Grant No.2014YQ120351)
文摘The hexagonal boron nitrides （BNs） with different morphologies are synthesized on a large scale by a simple route using a two-step synthetic process. The morphology of h-BN can be easily controlled by changing the heat-treatment atmosphere. The whiskers with 0.5-10 μm in diameter and 50-100 μm in length consist of few-layers nanosheets in the NH3 gas. The BN nanosheets can be dissociated from the whiskers by ultrasonic treatment, which are less than 5 nm in thickness and even only two layers thick. The concentration and activity of N play an important rule, and abundant N and higher activity are conducive for refining grain in reaction. The H3BO3 and C3N6H6 molecules form a layer-like morphology with the interlinked planar triangle by a hydrogen-bonded structure.
基金the China National Natural Science Foundation of China (Nos. 21722604, 21576122, 21376111)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)+1 种基金a scholarship from the China Scholarship Council (CSC)the Postgraduate Innovation Project of Jiangsu Province (NO. KYLX15_1067)
文摘High-quality graphene flakes have long been desirable for numerous applications including energy stor- age, printable electronics, and catalysis. In this contribution, we report a green, efficient, facile gas-driven exfoliation process for the preparation of high-quality graphene in large scale. The gas exfoliation process was realized by the interplay between the expansion of interlayer at high temperature and the gasifi- cation of liquid nitrogen within the interlayer. Detailed experiments demonstrated that the higher tem- perature was critical to the formation of fewer layers. The exfoliated graphene was proved to be of high quality. We further investigated the electrochemical behavior of this exfoliated graphene. As a result, this few-layered graphene demonstrated an enhanced capability as a supercapacitor, much higher than its counterpart parent material.
基金supported by the National Basic Research Program of China(Grant No.2012CB921300)the National Natural Science Foundation of China(Grant Nos.11074005 and 91021007)the Chinese Ministry of Education
文摘Few-layer graphene grown on Ni thin films has been studied by scanning tunneling microscopy. In most areas on the surfaces, moir6 patterns resulted from rotational stacking faults were observed. At a bias lower than 200 mV, only one sublattice shows up in regions without moir6 patterns while both sublattices are seen in regions with moir6 pattens. This phenomenon can be used to identify AB stacked regions. The scattering characteristics at various types of step edges are different from those of monolayer graphene edges, either armchair or zigzag.
文摘The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experiments, and used to investigate the principal effects of the process parameters such as plasma density, electron temperature, surface temperature and time of growth on the size and structure of the plasma-grown graphene flakes. It was demonstrated that the higher growth temperatures result in larger graphene flakes reaching 5 μm, and simultaneously, lead to much lower density of the carbon atoms adsorbed on the flake surface. The low density of the carbon adatoms reduces the probability of the additional graphene layer nucleation on surface of growing flake, thus eventually resulting in the synthesis of the most valuable single-layered graphenes.
