将C含量(质量分数)分别为0.05%和0.4%的Fe-C-Mn-Si钢进行等温处理得到贝氏体组织,采用EBSD技术对奥氏体共格孪晶界上形成的贝氏体铁素体变体进行分析.结果表明,2种钢中的贝氏体铁素体与母相奥氏体均成近似K-S取向关系.奥氏体孪晶界两侧...将C含量(质量分数)分别为0.05%和0.4%的Fe-C-Mn-Si钢进行等温处理得到贝氏体组织,采用EBSD技术对奥氏体共格孪晶界上形成的贝氏体铁素体变体进行分析.结果表明,2种钢中的贝氏体铁素体与母相奥氏体均成近似K-S取向关系.奥氏体孪晶界两侧形成取向相同的变体对.此变体对形成后,孪晶界基本不再显现.晶体学分析表明,共格孪晶界两侧可能出现的变体对最多不超过3组,且这3组变体对的惯习面均与孪晶界平行,因此,贝氏体铁素体变体都将沿孪晶界生长.含C量为0.05%的Fe-C-Mn-Si钢中奥氏体孪晶界上只观察到一组贝氏体铁素体变体对的形成,这是因为C含量较低,贝氏体铁素体生长速度较快,消除了其它变体对的形核机会,先形核的变体对一旦形核就迅速覆盖整个孪晶面.而在含C量为0.4%的Fe C Mn-Si钢中,由于C含量较高,贝氏体铁素体生长速度较慢,3组变体对均有机会形核,因此,在孪晶界上可以观察到这3组变体对同时出现.展开更多
In the present paper, a numerical modeling was developed to simulate the growth kinetics of ferrite transformed from austenite in Fe-C-∑X （X denotes substitution elements, such as Mn, Ni, Cr etc.） steels by solving...In the present paper, a numerical modeling was developed to simulate the growth kinetics of ferrite transformed from austenite in Fe-C-∑X （X denotes substitution elements, such as Mn, Ni, Cr etc.） steels by solving the diffusion equation using finite difference method （FDM）. Coupled with the kinetic modeling, thermodynamic calculations were carried out to determine the γ/α phase equilibrium conditions using a para-equilibrium （PE） model. The dissipation of free energy for γ→α phase transformation due to the so-called solute drag effect （SDE） was taken into account in the thermodynamic modeling. With this modeling, simulations on the growth kinetics of ferrite in the steels containing austenite-stabilizing and ferrite-stabilizing elements （such as Ni, Mn and Si, Cr, respectively） were performed, which indicates that it deviates from the parabolic growth rate law after the initial stage of transformation. The results were compared with the experimental values given by Bradley and Aaronson, showing that this model has a reasonably good accuracy to predict the growth kinetics of ferrite.展开更多
Based on a proposed method, the mathematical expressions between carbon solubility in Fe-C-j (j=Al, Si, P, S) melts and temperature were obtained. The expressions show the relation of the affecting factors of componen...Based on a proposed method, the mathematical expressions between carbon solubility in Fe-C-j (j=Al, Si, P, S) melts and temperature were obtained. The expressions show the relation of the affecting factors of component j and temperature on carbon solubility, and the activity interaction coefficient of j upon carbon depends on atomic number, covalent radius and electro-negativity. The affecting factors of four elements on carbon solubility are all negative. There is a linear relationship between covalent radius and electro-negativity.展开更多
Volume change related defects formation mechanisms are an important detracting phenomenon in production of complex shaped cast components.Among different technical alloys,cast iron behaves in a complex manner due to t...Volume change related defects formation mechanisms are an important detracting phenomenon in production of complex shaped cast components.Among different technical alloys,cast iron behaves in a complex manner due to the combined volume change of the formed phases.The liquid and the austenitic phase are contracting while the graphite phase is expanding during the solidification.The complex volume change in combination with complex casting shapes causes a considerable deviation from isotropy in the solidification domain.The mentioned difficulties are considered the main reason why an extensive research work is condensed in the literature within this topic.The multitude of reported experimental set up and the various efforts to interpret the volume change phenomena in terms of density and thermal expansion coefficients makes the results difficult to compare from different sources.With these difficulties in mind,the present paper presents a broad experimental series and measures unidirectional linear deformation of an industrially spread lamellar cast iron alloy system(Fe-C-2Si)using the push-rod based dilatometer technique.The measurements are divided into two major groups with respect to the liquid iron deformation over the liquidus temperature line,and the austenite deformation below the solidus temperature line.The obtained results are interpreted as thermal expansion coefficients,density variation slopes,and density data at the liquids and solidus temperature.The obtained results are compared with literature data and with calculated values by the Thermo Calc software.展开更多
文摘将C含量(质量分数)分别为0.05%和0.4%的Fe-C-Mn-Si钢进行等温处理得到贝氏体组织,采用EBSD技术对奥氏体共格孪晶界上形成的贝氏体铁素体变体进行分析.结果表明,2种钢中的贝氏体铁素体与母相奥氏体均成近似K-S取向关系.奥氏体孪晶界两侧形成取向相同的变体对.此变体对形成后,孪晶界基本不再显现.晶体学分析表明,共格孪晶界两侧可能出现的变体对最多不超过3组,且这3组变体对的惯习面均与孪晶界平行,因此,贝氏体铁素体变体都将沿孪晶界生长.含C量为0.05%的Fe-C-Mn-Si钢中奥氏体孪晶界上只观察到一组贝氏体铁素体变体对的形成,这是因为C含量较低,贝氏体铁素体生长速度较快,消除了其它变体对的形核机会,先形核的变体对一旦形核就迅速覆盖整个孪晶面.而在含C量为0.4%的Fe C Mn-Si钢中,由于C含量较高,贝氏体铁素体生长速度较慢,3组变体对均有机会形核,因此,在孪晶界上可以观察到这3组变体对同时出现.
基金supported by the National Natural Sci-ence Foundation of China(50474086)the program for New Century Talents in University(NECT)the Ministry of Education,China.
文摘In the present paper, a numerical modeling was developed to simulate the growth kinetics of ferrite transformed from austenite in Fe-C-∑X （X denotes substitution elements, such as Mn, Ni, Cr etc.） steels by solving the diffusion equation using finite difference method （FDM）. Coupled with the kinetic modeling, thermodynamic calculations were carried out to determine the γ/α phase equilibrium conditions using a para-equilibrium （PE） model. The dissipation of free energy for γ→α phase transformation due to the so-called solute drag effect （SDE） was taken into account in the thermodynamic modeling. With this modeling, simulations on the growth kinetics of ferrite in the steels containing austenite-stabilizing and ferrite-stabilizing elements （such as Ni, Mn and Si, Cr, respectively） were performed, which indicates that it deviates from the parabolic growth rate law after the initial stage of transformation. The results were compared with the experimental values given by Bradley and Aaronson, showing that this model has a reasonably good accuracy to predict the growth kinetics of ferrite.
文摘Based on a proposed method, the mathematical expressions between carbon solubility in Fe-C-j (j=Al, Si, P, S) melts and temperature were obtained. The expressions show the relation of the affecting factors of component j and temperature on carbon solubility, and the activity interaction coefficient of j upon carbon depends on atomic number, covalent radius and electro-negativity. The affecting factors of four elements on carbon solubility are all negative. There is a linear relationship between covalent radius and electro-negativity.
基金realized partly within the SPOFICⅠ&Ⅱproject founded fromthe Swedish VINNOVA agencypartly within the project Lean Cast financed by the Swedish Knowledge Foundation。
文摘Volume change related defects formation mechanisms are an important detracting phenomenon in production of complex shaped cast components.Among different technical alloys,cast iron behaves in a complex manner due to the combined volume change of the formed phases.The liquid and the austenitic phase are contracting while the graphite phase is expanding during the solidification.The complex volume change in combination with complex casting shapes causes a considerable deviation from isotropy in the solidification domain.The mentioned difficulties are considered the main reason why an extensive research work is condensed in the literature within this topic.The multitude of reported experimental set up and the various efforts to interpret the volume change phenomena in terms of density and thermal expansion coefficients makes the results difficult to compare from different sources.With these difficulties in mind,the present paper presents a broad experimental series and measures unidirectional linear deformation of an industrially spread lamellar cast iron alloy system(Fe-C-2Si)using the push-rod based dilatometer technique.The measurements are divided into two major groups with respect to the liquid iron deformation over the liquidus temperature line,and the austenite deformation below the solidus temperature line.The obtained results are interpreted as thermal expansion coefficients,density variation slopes,and density data at the liquids and solidus temperature.The obtained results are compared with literature data and with calculated values by the Thermo Calc software.
