A metal-sensitive diaphragm fiber optic pressure sensor with temperature compensation is developed for pressure monitoring in high-temperature environments,such as engine fuel systems,oil and gas wells,and aviation hy...A metal-sensitive diaphragm fiber optic pressure sensor with temperature compensation is developed for pressure monitoring in high-temperature environments,such as engine fuel systems,oil and gas wells,and aviation hydraulic systems.The sensor combines a metal-sensitive diaphragm and a sapphire wafer to form a temperature-pressure dual Fabry-Perot(FP)interference cavity.A cross-correlation signal demodulation algorithm and a temperature decoupling method are utilized to reduce the influence of temperature crosstalk on pressure measurement.Experimental results show that the maximum nonlinear error of the sensor pressure measurement is 0.75%full scale(FS)and 0.99%FS at room temperature and 300°C,respectively,in a pressure range of 0−10 MPa and 0−1.5 MPa.The sensor’s pressure measurement accuracy is 1.7%FS when using the temperature decoupling method.The sensor exhibits good static pressure characteristics,stability,and reliability,providing an effective solution for high-temperature pressure monitoring applications.展开更多
This paper presents a method for fabricating a low-cost,highly reproducible miniature optical fiber Fabry-Perot(FP)sensor based on a polydimethylsiloxane(PDMS)end-cap structure.The FP cavity end-cap is formed by the o...This paper presents a method for fabricating a low-cost,highly reproducible miniature optical fiber Fabry-Perot(FP)sensor based on a polydimethylsiloxane(PDMS)end-cap structure.The FP cavity end-cap is formed by the optical fiber end-face and a PDMS droplet deposited onto it.The PDMS deposition is achieved by immersing the fiber end into pre-cured PDMS at a fixed speed,a process requiring careful control of PDMS viscosity and surface tension.By leveraging PDMS’s excellent thermal expansion coefficient,Poisson’s ratio,and other parameters,this method achieves high reproducibility via viscosity-optimized pre-curing,enhanced sensitivity for temperature measurements,and significant cost reduction versus commercial counterparts.Fiber FP sensors are increasingly widely used in biomedical and precision detection fields owing to their significant advantages,including small size,light weight,high sensitivity,and immunity to electromagnetic interference.In the fabrication of fiber FP sensors,using polymer materials is an effective technical approach.These polymers can be applied as coatings on the optical fiber end-face or as interlayer materials embedded between fibers to form the FP cavity structure,which not only significantly improves the overall sensor performance,but also enhances its sensitivity to changes in temperature,pressure,and refractive index.In the final part of this study,we successfully validated the exceptional performance of the PDMS end-cap based fiber FP sensor in detecting different temperatures conditions.Experimental results demonstrate a temperature sensitivity of 0.752 nm/℃for sensors with a 60-μm PDMS end-cap,further confirming the sensor’s reliability and efficiency in practical applications.展开更多
设计了一种工作于X波段的基于共享孔径Fabry-Perot(F-P)谐振腔结构的宽带高增益磁电偶极子微带天线,并设计了三种不同尺寸的双层频率选择表面(FSS)单元,通过共享孔径布阵组成了超材料覆层.利用三种FSS单元的相位补偿特性,有效拓展了覆...设计了一种工作于X波段的基于共享孔径Fabry-Perot(F-P)谐振腔结构的宽带高增益磁电偶极子微带天线,并设计了三种不同尺寸的双层频率选择表面(FSS)单元,通过共享孔径布阵组成了超材料覆层.利用三种FSS单元的相位补偿特性,有效拓展了覆层天线的增益带宽.实测和仿真结果均表明,加载超材料覆层后,磁电偶极子天线在7.8—12.3 GHz内S_(11)<-10 d B,相对带宽达到44.7%,覆盖整个X波段.天线增益在7.9—12.1 GHz内均有明显的提高,最大提高了7 d B.相较于传统的F-P谐振腔结构覆层天线,设计的基于共享孔径的F-P谐振型超材料覆层天线能够明显拓展天线增益带宽,在新型宽带高增益天线设计方面具有广阔的应用前景.展开更多
文摘A metal-sensitive diaphragm fiber optic pressure sensor with temperature compensation is developed for pressure monitoring in high-temperature environments,such as engine fuel systems,oil and gas wells,and aviation hydraulic systems.The sensor combines a metal-sensitive diaphragm and a sapphire wafer to form a temperature-pressure dual Fabry-Perot(FP)interference cavity.A cross-correlation signal demodulation algorithm and a temperature decoupling method are utilized to reduce the influence of temperature crosstalk on pressure measurement.Experimental results show that the maximum nonlinear error of the sensor pressure measurement is 0.75%full scale(FS)and 0.99%FS at room temperature and 300°C,respectively,in a pressure range of 0−10 MPa and 0−1.5 MPa.The sensor’s pressure measurement accuracy is 1.7%FS when using the temperature decoupling method.The sensor exhibits good static pressure characteristics,stability,and reliability,providing an effective solution for high-temperature pressure monitoring applications.
文摘This paper presents a method for fabricating a low-cost,highly reproducible miniature optical fiber Fabry-Perot(FP)sensor based on a polydimethylsiloxane(PDMS)end-cap structure.The FP cavity end-cap is formed by the optical fiber end-face and a PDMS droplet deposited onto it.The PDMS deposition is achieved by immersing the fiber end into pre-cured PDMS at a fixed speed,a process requiring careful control of PDMS viscosity and surface tension.By leveraging PDMS’s excellent thermal expansion coefficient,Poisson’s ratio,and other parameters,this method achieves high reproducibility via viscosity-optimized pre-curing,enhanced sensitivity for temperature measurements,and significant cost reduction versus commercial counterparts.Fiber FP sensors are increasingly widely used in biomedical and precision detection fields owing to their significant advantages,including small size,light weight,high sensitivity,and immunity to electromagnetic interference.In the fabrication of fiber FP sensors,using polymer materials is an effective technical approach.These polymers can be applied as coatings on the optical fiber end-face or as interlayer materials embedded between fibers to form the FP cavity structure,which not only significantly improves the overall sensor performance,but also enhances its sensitivity to changes in temperature,pressure,and refractive index.In the final part of this study,we successfully validated the exceptional performance of the PDMS end-cap based fiber FP sensor in detecting different temperatures conditions.Experimental results demonstrate a temperature sensitivity of 0.752 nm/℃for sensors with a 60-μm PDMS end-cap,further confirming the sensor’s reliability and efficiency in practical applications.
文摘设计了一种工作于X波段的基于共享孔径Fabry-Perot(F-P)谐振腔结构的宽带高增益磁电偶极子微带天线,并设计了三种不同尺寸的双层频率选择表面(FSS)单元,通过共享孔径布阵组成了超材料覆层.利用三种FSS单元的相位补偿特性,有效拓展了覆层天线的增益带宽.实测和仿真结果均表明,加载超材料覆层后,磁电偶极子天线在7.8—12.3 GHz内S_(11)<-10 d B,相对带宽达到44.7%,覆盖整个X波段.天线增益在7.9—12.1 GHz内均有明显的提高,最大提高了7 d B.相较于传统的F-P谐振腔结构覆层天线,设计的基于共享孔径的F-P谐振型超材料覆层天线能够明显拓展天线增益带宽,在新型宽带高增益天线设计方面具有广阔的应用前景.
