The aim of the present real time in vivo micro-computed tomography （pCT） and histologic experiment was to assess the efficacy of guided bone regeneration （GBR） around standardized calvarial critical size defects ...The aim of the present real time in vivo micro-computed tomography （pCT） and histologic experiment was to assess the efficacy of guided bone regeneration （GBR） around standardized calvarial critical size defects （CSD） using bone marrow-derived mesenchymal stem cells （BMSCs）, and collagen membrane （CM） with and without tricalcium phosphate （TCP） graft material. In the calvaria of nine female Sprague-Dawley rats, full-thickness CSD （diameter 4.6 mm） were created under general anesthesia. Treatment-wise, rats were divided into three groups. In group 1, CSD was covered with a resorbable CM; in group 2, BMSCs were filled in CSD and covered with CM; and in group 3, TCP soaked in BMSCs was placed in CSD and covered with CM. All defects were closed using resorbable sutures. Bone volume and bone mineral density of newly formed bone （NFB） and remaining TCP particles and rate of new bone formation was determined at baseline, 2, 4, 6, and 10 weeks using in vivo pCT. At the lOth week, the rats were killed and calvarial segments were assessed histologically. The results showed that the hardness of NFB was similar to that of the native bone in groups I and 2 as compared to the NFB in group 3. Likewise, values for the modulus of elasticity were also significantly higher in group 3 compared to groups 1 and 2. This suggests that TCP when used in combination with BMSCs and without CM was unable to form bone of significant strength that could possibly provide mechanical ＂lock＂ between the natural bone and NFB. The use of BMSCs as adjuncts to conventional GBR initiated new bone formation as early as 2 weeks of treatment compared to when GBR is attempted without adiunct BMSC therapy.展开更多
Recently, porous titanium granules （PTGs） have been indicated for the preservation of the dimensions of post-extraction sockets, as a filler in sinus lift procedures and for the treatment of peri-implant and periodo...Recently, porous titanium granules （PTGs） have been indicated for the preservation of the dimensions of post-extraction sockets, as a filler in sinus lift procedures and for the treatment of peri-implant and periodontal defects, based on the osteoconductivity and dimensional stability of the titanium granules. However, there is a lack of information regarding the use of this material in larger defects and in conjunction with membranes. The objective of this study is to test the behavior of PTGs used to fill critical size defects in rabbit tibiae, with and without membranes. Critical defects were created in both tibiae of rabbits, divided randomly into three groups： Group A （defect filled with PTG）, Group B （defect filled with PTG＋collagen membrane） and a control group （empty defect）. After six weeks, histomorphometric analysis was performed. The results showed more defect closures at the cortical area （87.37%±2.2%） and more bone formation at the marrow area （57.6%± 1.3%） in Group B, in comparison with the other groups （P〈0.05）; the use of membranes improved the material stability expressed as more percentages of the original material when membranes were used （P〈0.05）. Finally, inflammatory reactions were observed when the granules were not protected by membranes. In spite of the limitations of this animal study, it may be concluded that PTG particles are osteoconductive and allow bone growth. The PTG particles must be covered by a membrane, especially when grafting larger defects, in order to control particle migration, promote clot stabilization and separate the PTG graft from undesired soft tissue cells.展开更多
BACKGROUND Critically sized bone defects represent a significant challenge to orthopaedic surgeons worldwide.These defects generally result from severe trauma or resection of a whole large tumour.Autologous bone graft...BACKGROUND Critically sized bone defects represent a significant challenge to orthopaedic surgeons worldwide.These defects generally result from severe trauma or resection of a whole large tumour.Autologous bone grafts are the current gold standard for the reconstruction of such defects.However,due to increased patient morbidity and the need for a second operative site,other lines of treatment should be introduced.To find alternative unconventional therapies to manage such defects,bone tissue engineering using a combination of suitable bioactive factors,cells,and biocompatible scaffolds offers a promising new approach for bone regeneration.AIM To evaluate the healing capacity of platelet-rich fibrin(PRF)membranes seeded with allogeneic mesenchymal bone marrow-derived stem cells(BMSCs)on critically sized mandibular defects in a rat model.METHODS Sixty-three Sprague Dawley rats were subjected to bilateral bone defects of critical size in the mandibles created by a 5-mm diameter trephine bur.Rats were allocated to three equal groups of 21 rats each.Group I bone defects were irrigated with normal saline and designed as negative controls.Defects of group II were grafted with PRF membranes and served as positive controls,while defects of group III were grafted with PRF membranes seeded with allogeneic BMSCs.Seven rats from each group were killed at 1,2 and 4 wk.The mandibles were dissected and prepared for routine haematoxylin and eosin(HE)staining,Masson's trichrome staining and CD68 immunohistochemical staining.RESULTS Four weeks postoperatively,the percentage area of newly formed bone was significantly higher in group III(0.88±0.02)than in groups I(0.02±0.00)and II(0.60±0.02).The amount of granulation tissue formation was lower in group III(0.12±0.02)than in groups I(0.20±0.02)and II(0.40±0.02).The number of inflammatory cells was lower in group III(0.29±0.03)than in groups I(4.82±0.08)and II(3.09±0.07).CONCLUSION Bone regenerative quality of critically sized mandibular bone defects in rats was better promoted by PRF membranes seeded with BMSCs than with PRF membranes alone.展开更多
The classical EPQ model has been used for a long ti me and is widely accepted and implemented. Nevertheless, the analysis for finding an economic lot size has based on a number of unrealistic assumptions. A common unr...The classical EPQ model has been used for a long ti me and is widely accepted and implemented. Nevertheless, the analysis for finding an economic lot size has based on a number of unrealistic assumptions. A common unrealistic assumption in using EPQ is that all units produced are of good quali ty. The classical EPQ model shows that the optimal lot size will generate minimum ma nufacturing cost, thus producing minimum setup cost and inventory cost. However, this is only true if all products manufactured in the process are assumed to be of good quality (i.e. all products are within the specification limits). In rea lity this is not the case, therefore, it is necessary to consider the cost of im perfect quality items, because this cost can influence the economic lot size. Ma ny studies and recent papers have indicated that there is a significant relation ship between economic production lot size and process/product quality. However, their models included either the imperfect quality items (not necessarily de fective) which are to be sold at a discounted price or defective items which can be reworked or rejected. The aim of this paper is to provide a framework to integrate three different sit uations (discounted pricing/rework/reject) into a single model. 100% inspection is performed in order to distinguish the amount of good quality items, imper fect quality items and defective items in each lot. In this paper, a mathematica l model is developed, and a numerical example is presented to illustrate the sol ution procedures. It is found that the economic production lot size tends to inc rease as the average percentage of imperfect quality items and defectives (rejec ted items) increases.展开更多
This paper uses various mean-field approaches and the Monte Carlo simulation to calculate asymmetric simple exclusion processes with particles of arbitrary size in the successive defects system. In this system, the ho...This paper uses various mean-field approaches and the Monte Carlo simulation to calculate asymmetric simple exclusion processes with particles of arbitrary size in the successive defects system. In this system, the hopping probability p （p 〈 1） and the size d of particles are not constant, Through theoretical calculation and computer simulation, it obtains the exact theoretical results and finds that the theoretical results are in agreement with the computer simulation. These results are helpful in analysing the effect of traffic with different hopping probabilities p and sizes d of particle.展开更多
Experiments on maxillofacial bone tissue engineering showed the promising result;however, its healing mechanisms and effectiveness had not been fully understood. The aim of this study is to compare the bone healing me...Experiments on maxillofacial bone tissue engineering showed the promising result;however, its healing mechanisms and effectiveness had not been fully understood. The aim of this study is to compare the bone healing mechanism and osteogenic capacity between bovine bone mineral loaded with hAMSC and autogenous bone graft in the reconstruction of critical size mandibular bone defect. Critical size defects were made at the mandible of 45 New Zealand white rabbits reconstructed with BBM-hAMSC, BBM alone, and ABG, respectively. At the end of first, second, and twelfth weeks, five rabbits from each experimental week were sacrificed for histology and immunohistochemistry staining. Expressions of vascular endothelial growth factor (VEGF), bone mor-phogenic proteins-2 (BMP2), Runx2 and the amount of angiogenesis were analyzed in the first and second week groups, while expressions of Runx2, osteocalcin, collagen type-I fibres, trabecular area and bone incorporation were analyzed in the twelfth week groups. The result showed that expressions of VEGF, BMP2 and Runx2 as well as the amount of angiogenesis were higher in ABG compared with BBM-hAMSC group in the first and second weeks of healing. The result of twelfth week of healing showed that expressions of Runx2 and osteocalcin as well as the thickness of collagen type-I fibres were significantly higher in BBM-hAMSC compared to ABG group, while there was no statistically difference in trabecular area and bone incorporation between BBM-hAMSC and ABG group. This study concluded that early healing activities were higher in auto-genous bone graft than in BBM-hAMSC, while osteogenic activities in the late stage of healing were higher in BBM-hAMSC compared to autogenous bone graft. It was also concluded that the osteo-genic capacity of BBM-hAMSC was comparable to autogenous bone graft in the reconstruction of critical size defect in the mandible.展开更多
A set of metallic specimens containing fatigue cracks with different sizes were tested using eddy current pulsed thermography(ECPT),therefore the relations between heating response of the crack area and the crack leng...A set of metallic specimens containing fatigue cracks with different sizes were tested using eddy current pulsed thermography(ECPT),therefore the relations between heating response of the crack area and the crack length was studied.The numerical and experimental results both showed that the increase of the crack length enhanced the crack heating response under specific test conditions.A particular form of calculated response signal,which is linearly related to the crack length,was introduced to provide a quantitative evaluation of crack length.展开更多
Fluoride mediated nano-sized ZSM-5 （ZSM-5-F） with a high Si/AI ratio of 181 was fabricated using a seed-induction method and evaluated the catalysis of the methanol to propylene （MTP） reaction. High propylene sele...Fluoride mediated nano-sized ZSM-5 （ZSM-5-F） with a high Si/AI ratio of 181 was fabricated using a seed-induction method and evaluated the catalysis of the methanol to propylene （MTP） reaction. High propylene selectivity （45%） was similar to ZSM-5-OH synthesized via a hydroxide route. However, ZSM- 5-F showed much longer lifetime （305 h） compared with ZSM-5-OH （157 h） in spite of similar crystal size and aluminum content. Characterization by NH3-TPD. Py-IR, OH-IR, SEM, TG-DTA, XRD and 1H MAS NMR techniques indicated that the enhanced catalytic performance of ZSM-S-F is attributed to the fewer structural defects in the form of internal silanol groups and silanol nests.展开更多
基金King Saud University,through Vice Deanship of Research Chairs
文摘The aim of the present real time in vivo micro-computed tomography （pCT） and histologic experiment was to assess the efficacy of guided bone regeneration （GBR） around standardized calvarial critical size defects （CSD） using bone marrow-derived mesenchymal stem cells （BMSCs）, and collagen membrane （CM） with and without tricalcium phosphate （TCP） graft material. In the calvaria of nine female Sprague-Dawley rats, full-thickness CSD （diameter 4.6 mm） were created under general anesthesia. Treatment-wise, rats were divided into three groups. In group 1, CSD was covered with a resorbable CM; in group 2, BMSCs were filled in CSD and covered with CM; and in group 3, TCP soaked in BMSCs was placed in CSD and covered with CM. All defects were closed using resorbable sutures. Bone volume and bone mineral density of newly formed bone （NFB） and remaining TCP particles and rate of new bone formation was determined at baseline, 2, 4, 6, and 10 weeks using in vivo pCT. At the lOth week, the rats were killed and calvarial segments were assessed histologically. The results showed that the hardness of NFB was similar to that of the native bone in groups I and 2 as compared to the NFB in group 3. Likewise, values for the modulus of elasticity were also significantly higher in group 3 compared to groups 1 and 2. This suggests that TCP when used in combination with BMSCs and without CM was unable to form bone of significant strength that could possibly provide mechanical ＂lock＂ between the natural bone and NFB. The use of BMSCs as adjuncts to conventional GBR initiated new bone formation as early as 2 weeks of treatment compared to when GBR is attempted without adiunct BMSC therapy.
文摘Recently, porous titanium granules （PTGs） have been indicated for the preservation of the dimensions of post-extraction sockets, as a filler in sinus lift procedures and for the treatment of peri-implant and periodontal defects, based on the osteoconductivity and dimensional stability of the titanium granules. However, there is a lack of information regarding the use of this material in larger defects and in conjunction with membranes. The objective of this study is to test the behavior of PTGs used to fill critical size defects in rabbit tibiae, with and without membranes. Critical defects were created in both tibiae of rabbits, divided randomly into three groups： Group A （defect filled with PTG）, Group B （defect filled with PTG＋collagen membrane） and a control group （empty defect）. After six weeks, histomorphometric analysis was performed. The results showed more defect closures at the cortical area （87.37%±2.2%） and more bone formation at the marrow area （57.6%± 1.3%） in Group B, in comparison with the other groups （P〈0.05）; the use of membranes improved the material stability expressed as more percentages of the original material when membranes were used （P〈0.05）. Finally, inflammatory reactions were observed when the granules were not protected by membranes. In spite of the limitations of this animal study, it may be concluded that PTG particles are osteoconductive and allow bone growth. The PTG particles must be covered by a membrane, especially when grafting larger defects, in order to control particle migration, promote clot stabilization and separate the PTG graft from undesired soft tissue cells.
文摘BACKGROUND Critically sized bone defects represent a significant challenge to orthopaedic surgeons worldwide.These defects generally result from severe trauma or resection of a whole large tumour.Autologous bone grafts are the current gold standard for the reconstruction of such defects.However,due to increased patient morbidity and the need for a second operative site,other lines of treatment should be introduced.To find alternative unconventional therapies to manage such defects,bone tissue engineering using a combination of suitable bioactive factors,cells,and biocompatible scaffolds offers a promising new approach for bone regeneration.AIM To evaluate the healing capacity of platelet-rich fibrin(PRF)membranes seeded with allogeneic mesenchymal bone marrow-derived stem cells(BMSCs)on critically sized mandibular defects in a rat model.METHODS Sixty-three Sprague Dawley rats were subjected to bilateral bone defects of critical size in the mandibles created by a 5-mm diameter trephine bur.Rats were allocated to three equal groups of 21 rats each.Group I bone defects were irrigated with normal saline and designed as negative controls.Defects of group II were grafted with PRF membranes and served as positive controls,while defects of group III were grafted with PRF membranes seeded with allogeneic BMSCs.Seven rats from each group were killed at 1,2 and 4 wk.The mandibles were dissected and prepared for routine haematoxylin and eosin(HE)staining,Masson's trichrome staining and CD68 immunohistochemical staining.RESULTS Four weeks postoperatively,the percentage area of newly formed bone was significantly higher in group III(0.88±0.02)than in groups I(0.02±0.00)and II(0.60±0.02).The amount of granulation tissue formation was lower in group III(0.12±0.02)than in groups I(0.20±0.02)and II(0.40±0.02).The number of inflammatory cells was lower in group III(0.29±0.03)than in groups I(4.82±0.08)and II(3.09±0.07).CONCLUSION Bone regenerative quality of critically sized mandibular bone defects in rats was better promoted by PRF membranes seeded with BMSCs than with PRF membranes alone.
文摘The classical EPQ model has been used for a long ti me and is widely accepted and implemented. Nevertheless, the analysis for finding an economic lot size has based on a number of unrealistic assumptions. A common unrealistic assumption in using EPQ is that all units produced are of good quali ty. The classical EPQ model shows that the optimal lot size will generate minimum ma nufacturing cost, thus producing minimum setup cost and inventory cost. However, this is only true if all products manufactured in the process are assumed to be of good quality (i.e. all products are within the specification limits). In rea lity this is not the case, therefore, it is necessary to consider the cost of im perfect quality items, because this cost can influence the economic lot size. Ma ny studies and recent papers have indicated that there is a significant relation ship between economic production lot size and process/product quality. However, their models included either the imperfect quality items (not necessarily de fective) which are to be sold at a discounted price or defective items which can be reworked or rejected. The aim of this paper is to provide a framework to integrate three different sit uations (discounted pricing/rework/reject) into a single model. 100% inspection is performed in order to distinguish the amount of good quality items, imper fect quality items and defective items in each lot. In this paper, a mathematica l model is developed, and a numerical example is presented to illustrate the sol ution procedures. It is found that the economic production lot size tends to inc rease as the average percentage of imperfect quality items and defectives (rejec ted items) increases.
基金Project supported by the National Key Fundamental Research and Development Project of China (Grant No 2005CB724206)
文摘This paper uses various mean-field approaches and the Monte Carlo simulation to calculate asymmetric simple exclusion processes with particles of arbitrary size in the successive defects system. In this system, the hopping probability p （p 〈 1） and the size d of particles are not constant, Through theoretical calculation and computer simulation, it obtains the exact theoretical results and finds that the theoretical results are in agreement with the computer simulation. These results are helpful in analysing the effect of traffic with different hopping probabilities p and sizes d of particle.
文摘Experiments on maxillofacial bone tissue engineering showed the promising result;however, its healing mechanisms and effectiveness had not been fully understood. The aim of this study is to compare the bone healing mechanism and osteogenic capacity between bovine bone mineral loaded with hAMSC and autogenous bone graft in the reconstruction of critical size mandibular bone defect. Critical size defects were made at the mandible of 45 New Zealand white rabbits reconstructed with BBM-hAMSC, BBM alone, and ABG, respectively. At the end of first, second, and twelfth weeks, five rabbits from each experimental week were sacrificed for histology and immunohistochemistry staining. Expressions of vascular endothelial growth factor (VEGF), bone mor-phogenic proteins-2 (BMP2), Runx2 and the amount of angiogenesis were analyzed in the first and second week groups, while expressions of Runx2, osteocalcin, collagen type-I fibres, trabecular area and bone incorporation were analyzed in the twelfth week groups. The result showed that expressions of VEGF, BMP2 and Runx2 as well as the amount of angiogenesis were higher in ABG compared with BBM-hAMSC group in the first and second weeks of healing. The result of twelfth week of healing showed that expressions of Runx2 and osteocalcin as well as the thickness of collagen type-I fibres were significantly higher in BBM-hAMSC compared to ABG group, while there was no statistically difference in trabecular area and bone incorporation between BBM-hAMSC and ABG group. This study concluded that early healing activities were higher in auto-genous bone graft than in BBM-hAMSC, while osteogenic activities in the late stage of healing were higher in BBM-hAMSC compared to autogenous bone graft. It was also concluded that the osteo-genic capacity of BBM-hAMSC was comparable to autogenous bone graft in the reconstruction of critical size defect in the mandible.
基金supported by the Open Foundation of Key Laboratory of Nondestructive Testing of Ministry of Education of Nanchang Aeronautical University
文摘A set of metallic specimens containing fatigue cracks with different sizes were tested using eddy current pulsed thermography(ECPT),therefore the relations between heating response of the crack area and the crack length was studied.The numerical and experimental results both showed that the increase of the crack length enhanced the crack heating response under specific test conditions.A particular form of calculated response signal,which is linearly related to the crack length,was introduced to provide a quantitative evaluation of crack length.
文摘Fluoride mediated nano-sized ZSM-5 （ZSM-5-F） with a high Si/AI ratio of 181 was fabricated using a seed-induction method and evaluated the catalysis of the methanol to propylene （MTP） reaction. High propylene selectivity （45%） was similar to ZSM-5-OH synthesized via a hydroxide route. However, ZSM- 5-F showed much longer lifetime （305 h） compared with ZSM-5-OH （157 h） in spite of similar crystal size and aluminum content. Characterization by NH3-TPD. Py-IR, OH-IR, SEM, TG-DTA, XRD and 1H MAS NMR techniques indicated that the enhanced catalytic performance of ZSM-S-F is attributed to the fewer structural defects in the form of internal silanol groups and silanol nests.
