Abstract： In order to improve the reactivity of Na2CO3/Al2O3 sorbent with CO2, a new sorbent showing high reactivity was developed by doping Na2CO3/Al2O3 with TiO2 using impregnation. Fourteen multi-cycle carbonation...Abstract： In order to improve the reactivity of Na2CO3/Al2O3 sorbent with CO2, a new sorbent showing high reactivity was developed by doping Na2CO3/Al2O3 with TiO2 using impregnation. Fourteen multi-cycle carbonation/regeneration tests of the sorbent were carried out in a fluidized-bed reactor and the sorbent was characterized by X-ray diffraction and nitrogen adsorption. It is confirmed that TiO2 shows a positive effect on the adsorption process of Na2CO3 and the reaction rate is observed to increase significantly, especially in the first 10 min. Moreover, TiO2 is stable within the temperature range of the process and no other Ti-compounds are detected. The carbonation products are NaHCO3 and Na5H3 （CO3 ）4. The surface area and the pore volume of the sorbent keep stable after 14 cycles. The Fourier transform infrared spectroscopy and the X-ray photoelectron spectroscopy are used to analyze the effect mechanism of TiO2 on CO2 adsorption process of Na2CO3/Al2O3.展开更多
Al2O3 and Ti-6Al-4V alloy were brazed with Ag-Cu-Ti ＋B fillers in different brazing conditions. Effects of brazing temperature, holding time and additive Ti content on joints microstructure and shear strength were in...Al2O3 and Ti-6Al-4V alloy were brazed with Ag-Cu-Ti ＋B fillers in different brazing conditions. Effects of brazing temperature, holding time and additive Ti content on joints microstructure and shear strength were investigated by scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, transmission electron microscopy and shear testing. Results indicate that TiCu and Ti（Cu,Al） decrease, but Ti2Cu and -Ti2（Cu,Al） increase in brazing seam with increasing brazing temperature, holding time and additive Ti content. Area consisting of Ti3（Cu,Al）30 and TiO near Al2O3 becomes gradually discontinuous from continuity when brazing temperature rises or holding time extends. As Ti additive content increases, TiO is absent near Al2O3, area consisting of only Ti3（Cu,Al）30 thickens. TiB whiskers are in situ synthesized by Ti and B atoms during brazing process. The brazing temperature, holding time and additive Ti content on joints microstructure influence the joints shear strength directly. The shear strength of joints, obtained at 850 ℃ holding for 10 min, reaches the maximum of 78 MPa. According to the experimental results, phase diagram and thermodynamics calculation, the interface evolution mechanism of the Al2O3/Ti-6Al-4V alloy joint was analyzed.展开更多
A novel flower-like hydrated magnesium carbonate hydroxide, Mg5 （CO3 ）4 （OH）2·4H2O, with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use o...A novel flower-like hydrated magnesium carbonate hydroxide, Mg5 （CO3 ）4 （OH）2·4H2O, with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant. Reaction time has an important effect on the final morphology of the product. The micro-structure and morphology of Mg5 （CO3）4 （OH）2·4H2O were characterized by means of X-ray diffractometry （XRD）, fieldemission scanning electron microscopy（FE-SEM）. Brunauer-Emmett-Teller（BET） surface areas of the samples were also measured. The probable formation mechanism of flower-like micro-structure was discussed. It was found that Mg5 （CO3）4（ OH）2·4H2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate （DPC） by transesterification of dimethyl carbonate （DMC） with phenol.展开更多
Chemical vapor deposition is the predominant method to prepare MgAl_(2)O_(4)fibers.However,it faces several challenges,including exorbitantly high reaction temperatures,substantial production costs,and relatively low ...Chemical vapor deposition is the predominant method to prepare MgAl_(2)O_(4)fibers.However,it faces several challenges,including exorbitantly high reaction temperatures,substantial production costs,and relatively low yields.In this study,porous MgAl_(2)O_(4)fibers were fabricated through a solid-state reaction method,utilizing MgSO_(4)·5Mg(OH)_(2)·3H_(2)O whiskers as templates,mixed with either aluminum sol orα-Al_(2)O_(3)micropowder.The impact of various parameters on the synthesis of porous MgAl_(2)O_(4)fibres was systematically investigated,including the heat treatment temperature(1000,1100 and 1300℃),the holding time(3 and 10 h)and the aluminum source(aluminum sol orα-Al_(2)O_(3)micropowder).The results reveal that:(1)in comparison with fibers synthesized usingα-Al_(2)O_(3)as the aluminum source,those prepared with aluminum sol exhibit a significantly higher generation amount of MgAl_(2)O_(4);(2)as the heat treatment temperature increases,Al_(2)O_(3)gradually reacts with MgO,continuously increasing the formation amount of porous MgAl_(2)O_(4)with small and uniformly distributed nanopores,and the synthesized porous MgAl_(2)O_(4)fibres have small and uniform nanopores;(3)the optimal synthesis process involves using aluminum sol as the aluminum source and firing at 1300℃ for 3 h.展开更多
The problem of water and sulfur poisoning in flue gas atmosphere remains a significant obstacle for low-temperature deNO_(x) catalysts.This study investigated the sulfation mechanism of the CoMn_(2)O_(4)/CeTiO_(x)(CMC...The problem of water and sulfur poisoning in flue gas atmosphere remains a significant obstacle for low-temperature deNO_(x) catalysts.This study investigated the sulfation mechanism of the CoMn_(2)O_(4)/CeTiO_(x)(CMCT)catalyst during the selective catalytic reduction of NO_(x) with NH3 under conditions containing H2O and SO_(2) at 150℃.Employing a comprehensive suite of time-resolved analysis and characterization techniques,the evolution of sulfate species was systematically categorized into three stages:initial rapid surface sulfate accumulation,the transformation of surface sulfates to bulk metal sulfates,and partial sulfates decomposition after the removal of H2O and SO_(2).These findings indicate that bulk metal sulfates irreversibly deactivate the catalyst by distorting active component lattices and consuming oxygen vacancies,whereas surface sulfates(including ammonium sulfates and surface-coordinated metal sulfates)cause reversible performance loss through decomposition.Furthermore,the competitive adsorption of H2O and SO_(2) significantly influences the catalytic efficiency,with H2O suppressing SO_(2) adsorption while simultaneously enhancing the formation of Brönsted acid sites.This research underscores the critical role of sulfate dynamics on catalyst performance,revealing the enhanced SO_(2) resistance of the Eley-Rideal mechanism facilitated by the Ce-Ti support relative to the Langmuir-Hinshelwood pathway.Collectively,the study unravels the complex interplay of sulfate dynamics influencing catalyst performance and provides potential approaches to mitigate deactivation in demanding atmospheric conditions.展开更多
Here we report that the presence of MgCO_(3) stimulates the extracellular polymeric substance (EPS) secretion of Microcystis Aeruginosa (M. Aeruginosa). This stimulation led to a significant reduction in the total con...Here we report that the presence of MgCO_(3) stimulates the extracellular polymeric substance (EPS) secretion of Microcystis Aeruginosa (M. Aeruginosa). This stimulation led to a significant reduction in the total concentration of NH_(4)^(+)‒N by more than 86%, and effective recovery of PO_(4)^(3-)‒P within three days from concentrated wastewater (WW), although the secreted EPS inhibited the conversion of MgCO_(3) to specific crystal forms (MgNH4PO4.6H2O or MgHPO4.7H2O). Moreover, with an increase in PO_(4)^(3-) concentration in WW, these crystals appeared, thus the removal of NH_(4)^(+)‒N and PO_(4)^(3-)‒P nutrients can be attributed to the combined effect of M. Aeruginosa and MgCO_(3). We used Surface-Enhanced Raman Spectroscopy (SERS) combined with X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (FESEM-EDS), and X-ray Photoelectron Spectroscopy (XPS) to investigate the mechanism for competitive interactions between M. Aeruginosa and MgCO_(3) in removing NH_(4)^(+)‒N and PO_(4)^(3-)‒P. We identified that the bound EPS accumulated amorphous Mg–P–O dense particles on M. Aeruginosa, while soluble EPS, containing –COOH groups of humic-like substances decreased the pH of the solution and coordinated with Mg^(2+) ions. Therefore, both secreted bound and soluble EPS play a vital role in hindering the transformation of Mg^(2+) ions or MgCO_(3) to MgNH4PO4.6H2O or MgHPO4.7H2O crystals within WW, and they enhanced M. Aeruginosa 's ability in absorbing nutrients of NH_(4)^(+)‒N and PO_(4)^(3-)‒P. This mechanism plays a crucial role in the efficient recovery of NH_(4)^(+)‒N and PO_(4)^(3-)‒P from concentrated wastewater sources such as aerobically or anaerobically digested effluent from various sources like agriculture, livestock, and domestic wastewaters.展开更多
With hexadecyl trimethyl ammonium bromide(CTAB)as the template,cobaltosic oxide precursors were hydrothermally synthesized.Co_(3)O_(4)catalysts were then prepared by calcining the cobaltosic oxide precursors,which was...With hexadecyl trimethyl ammonium bromide(CTAB)as the template,cobaltosic oxide precursors were hydrothermally synthesized.Co_(3)O_(4)catalysts were then prepared by calcining the cobaltosic oxide precursors,which was further modified by impregnation with K_(2)CO_(3) solution and used in the decomposition of N_(2)O.The catalysts were characterized by means of X-ray diffraction(XRD),nitrogen physisorption,scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),hydrogen temperature-programmed reduction(H_(2)-TPR),and oxygen temperature-programmed desorption(O_(2)-TPD);the effect of CTAB concentration,CTAB/cobalt molar ratio and urea/cobalt molar ratio on the catalytic activity of Co_(3)O_(4)was investigated.The results indicated that the Co_(3)O_(4)catalyst prepared by using 0.05 mol/L CTAB solution,with a CTAB to cobalt molar ratio of 1 and a urea to cobalt molar ratio of 4,exhibits high activity in N_(2)O decomposition.The catalytic performance of Co_(3)O_(4)can be further enhanced by modifying with K.Over the 0.02 K/Co_(3)O_(4)catalyst,the N_(2)O conversion remains over 91%at 400℃after conducting the N_(2)O decomposition reaction for 50 h in the presence of oxygen and steam.展开更多
The purpose of this work is to explore the effects of the introduction methods of Ce^4+and Zr^4+on the physicochemical properties,activity,and K tolerance of V2 O5-WO3/TiO2 catalyst for the selective catalytic reducti...The purpose of this work is to explore the effects of the introduction methods of Ce^4+and Zr^4+on the physicochemical properties,activity,and K tolerance of V2 O5-WO3/TiO2 catalyst for the selective catalytic reduction of NOx by NH3.Four different methods,namely pre-impregnation,post-impregnation,coimpregnation,and co-precipitation,were used to synthesize a series of V2 O5-WO3-TiO2-CeO2-ZrO2 catalysts.The catalysts were characterized by XRD,BET,NH3-TPD,XPS,and H2-TPR techniques.Moreover,the activity and anti-K poisoning performance were tested by an NH3-SCR model reaction.The results show that the introduction of Ce^4+and Zr^4+can improve the catalytic performance of V2O5-WO3/TiO2 catalyst,but the impregnation method cannot enhance the anti-K poisoning performance.Ce^4+and Zr^4+introduced by co-precipitation method can effectively improve the tolerance of K,which is mainly due to the incorporation of Ce^4+and Zr^4+into TiO2 lattice to form a uniform TiO2-CeO2-ZrO2 solid solution,resulting in the optimal surface acidity and redox performance,and reducing the decreases caused by Kpoisoning.Furthermore,based on the best introduction method,we further optimized the molar ratio of Ce^4+/Zr^4+,It is found that the catalyst exhibits the best anti-K poisoning performance when the molar ratio of Ce^4+/Zr^4+is 2:1.展开更多
Mesostructured Co3O4-CeO2 composite was found to be an effective catalytic material for the complete oxidation of benzene. The Co3O4-CeO2 catalysts with different Co/Ce ratios （mol/mol） were prepared via the nanocas...Mesostructured Co3O4-CeO2 composite was found to be an effective catalytic material for the complete oxidation of benzene. The Co3O4-CeO2 catalysts with different Co/Ce ratios （mol/mol） were prepared via the nanocasting method and the mesostructure was replicated from two-dimensional （2D） hexagonal SBA-15 and three-dimensional （3D） cubic KIT-6 silicas, respectively. All the obtained Co3O4-CeO2 catalysts exhibited the similar symmetry with the parent silicas and well ordered mesostructures. The Co3O4- CeO2 catalysts with 2D mesostructure showed lower catalytic activities than the corresponding 3D materials. The Co3O4-CeO2 catalyst nanocasted from KIT-6 and with the Co/Ce ratio of 16/1 possessed the best catalytic benzene oxidation activity due to larger quantities of surface hydroxyl groups and surface oxygenated species. The mesostructured Co3O4-CeO2 material thus shows great potential as a promising eco-environmental catalyst for benzene effective elimination.展开更多
An innovative technology,nitric acid pressure leaching of limonitic laterite ores,was proposed by our research team.The HNO3 regeneration is considerable significance for the improvement of the proposed technology and...An innovative technology,nitric acid pressure leaching of limonitic laterite ores,was proposed by our research team.The HNO3 regeneration is considerable significance for the improvement of the proposed technology and its commercial application,but it has not been systematically investigated.Herein,regenerating HNO3 from Ca(NO3)2 solution with low-cost H2SO4,and simultaneous synthesis of fibrous CaSO4·2H2O by-products were studied.As a theoretical basis,the solubility of CaSO4·2H2O in HNO3 medium is studied.It is concluded that the solubility of CaSO4·2H2O increases with increasing temperature or increasing HNO3 concentration,which has considerable guiding significance for the subsequent experimental research and analysis.Then,the effects of various factors on the residual Ca^2+ concentration of filtrate,the regenerated HNO3 concentration and the morphology of synthesized products are investigated using ICP-AES and SEM.And the effect mechanism is also analyzed.The results indicate the regenerated HNO3 concentration reaches 116 g/L with the residual Ca^2+ concentration being 9.7 g/L at the optimum conditions.Moreover,fibrous CaSO4·2H2O by-products with high aspect ratios(length,406.32μm;diameter,14.71μm;aspect ratio,27.62)can be simultaneously synthesized.展开更多
Transition metal oxides are promising candidates for the high-capacity anode material in lithium-ion batteries.The electrochemical performance of transition metal oxides can be improved by constructing suitable compos...Transition metal oxides are promising candidates for the high-capacity anode material in lithium-ion batteries.The electrochemical performance of transition metal oxides can be improved by constructing suitable composite architectures. Herein, we demonstrate a metal–organic framework(MOF)-assisted strategy for the synthesis of a hierarchical hybrid nanostructure composed of Fe_2O_3 nanotubes assembled in Co_3O_4 host. Starting from MOF composite precursors(Fe-based MOF encapsulated in a Cobased host matrix), a complex structure of Co_3O_4 host and engulfed Fe_2O_3 nanotubes was prepared by a simple annealing treatment in air. By virtue of their structural and compositional features, these hierarchical composite particles reveal enhanced lithium storage properties when employed as anodes for lithium-ion batteries.展开更多
The hierarchical ZnMn2O4/Mn3O4 composite sub-microrods were synthesized via a water-in-oil microemulsion method followed by calcination.The ZnMn2O4/Mn3O4 electrode displays an intriguing capacity increasing from 440 t...The hierarchical ZnMn2O4/Mn3O4 composite sub-microrods were synthesized via a water-in-oil microemulsion method followed by calcination.The ZnMn2O4/Mn3O4 electrode displays an intriguing capacity increasing from 440 to 910 mA·h/g at 500 mA/g during 550 consecutive discharge/charge cycles,and delivers an ultrahigh capacity of 1276 mA·h/g at 100 mA/g,which is much greater than the theoretical capacity of either ZnMn2O4 or Mn3O4 electrode.To investigate the underlying mechanism of this phenomenon,cyclic voltammetry and differential capacity analysis were applied,both of which reveal the emergence and the growth of new reversible redox reactions upon charge/discharge cycling.The new reversible conversions are probably the results of an activation process of the electrode material during the cycling process,leading to the climbing charge storage.However,the capacity exceeding the theoretical value indicates that there are still other factors contributing to the increasing capacity.展开更多
基金The National Natural Science Foundation of China(No.51476030)the Specialized Research Fund for the Doctoral Program of Higher Education(No.20130092110006)
文摘Abstract： In order to improve the reactivity of Na2CO3/Al2O3 sorbent with CO2, a new sorbent showing high reactivity was developed by doping Na2CO3/Al2O3 with TiO2 using impregnation. Fourteen multi-cycle carbonation/regeneration tests of the sorbent were carried out in a fluidized-bed reactor and the sorbent was characterized by X-ray diffraction and nitrogen adsorption. It is confirmed that TiO2 shows a positive effect on the adsorption process of Na2CO3 and the reaction rate is observed to increase significantly, especially in the first 10 min. Moreover, TiO2 is stable within the temperature range of the process and no other Ti-compounds are detected. The carbonation products are NaHCO3 and Na5H3 （CO3 ）4. The surface area and the pore volume of the sorbent keep stable after 14 cycles. The Fourier transform infrared spectroscopy and the X-ray photoelectron spectroscopy are used to analyze the effect mechanism of TiO2 on CO2 adsorption process of Na2CO3/Al2O3.
基金the National Natural Science Foundation of China (Grant Nos.51275135,51105107 and 51021002)the Natural Science Foundation of Heilongjiang Province,China (Grant No.QC2011C044)the Specialized Research Fund for the Doctoral Program of Higher Education,China (Grant No.20112302130005)
文摘Al2O3 and Ti-6Al-4V alloy were brazed with Ag-Cu-Ti ＋B fillers in different brazing conditions. Effects of brazing temperature, holding time and additive Ti content on joints microstructure and shear strength were investigated by scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, transmission electron microscopy and shear testing. Results indicate that TiCu and Ti（Cu,Al） decrease, but Ti2Cu and -Ti2（Cu,Al） increase in brazing seam with increasing brazing temperature, holding time and additive Ti content. Area consisting of Ti3（Cu,Al）30 and TiO near Al2O3 becomes gradually discontinuous from continuity when brazing temperature rises or holding time extends. As Ti additive content increases, TiO is absent near Al2O3, area consisting of only Ti3（Cu,Al）30 thickens. TiB whiskers are in situ synthesized by Ti and B atoms during brazing process. The brazing temperature, holding time and additive Ti content on joints microstructure influence the joints shear strength directly. The shear strength of joints, obtained at 850 ℃ holding for 10 min, reaches the maximum of 78 MPa. According to the experimental results, phase diagram and thermodynamics calculation, the interface evolution mechanism of the Al2O3/Ti-6Al-4V alloy joint was analyzed.
基金Supported by the National Natural Science Foundation of China(Nos.20671011,20331010,90406002and90406024)the 111 Project(No.B07012)the Key Laboratory of Structural Chemistry Foundation(No.060017).
文摘A novel flower-like hydrated magnesium carbonate hydroxide, Mg5 （CO3 ）4 （OH）2·4H2O, with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant. Reaction time has an important effect on the final morphology of the product. The micro-structure and morphology of Mg5 （CO3）4 （OH）2·4H2O were characterized by means of X-ray diffractometry （XRD）, fieldemission scanning electron microscopy（FE-SEM）. Brunauer-Emmett-Teller（BET） surface areas of the samples were also measured. The probable formation mechanism of flower-like micro-structure was discussed. It was found that Mg5 （CO3）4（ OH）2·4H2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate （DPC） by transesterification of dimethyl carbonate （DMC） with phenol.
文摘Chemical vapor deposition is the predominant method to prepare MgAl_(2)O_(4)fibers.However,it faces several challenges,including exorbitantly high reaction temperatures,substantial production costs,and relatively low yields.In this study,porous MgAl_(2)O_(4)fibers were fabricated through a solid-state reaction method,utilizing MgSO_(4)·5Mg(OH)_(2)·3H_(2)O whiskers as templates,mixed with either aluminum sol orα-Al_(2)O_(3)micropowder.The impact of various parameters on the synthesis of porous MgAl_(2)O_(4)fibres was systematically investigated,including the heat treatment temperature(1000,1100 and 1300℃),the holding time(3 and 10 h)and the aluminum source(aluminum sol orα-Al_(2)O_(3)micropowder).The results reveal that:(1)in comparison with fibers synthesized usingα-Al_(2)O_(3)as the aluminum source,those prepared with aluminum sol exhibit a significantly higher generation amount of MgAl_(2)O_(4);(2)as the heat treatment temperature increases,Al_(2)O_(3)gradually reacts with MgO,continuously increasing the formation amount of porous MgAl_(2)O_(4)with small and uniformly distributed nanopores,and the synthesized porous MgAl_(2)O_(4)fibres have small and uniform nanopores;(3)the optimal synthesis process involves using aluminum sol as the aluminum source and firing at 1300℃ for 3 h.
文摘The problem of water and sulfur poisoning in flue gas atmosphere remains a significant obstacle for low-temperature deNO_(x) catalysts.This study investigated the sulfation mechanism of the CoMn_(2)O_(4)/CeTiO_(x)(CMCT)catalyst during the selective catalytic reduction of NO_(x) with NH3 under conditions containing H2O and SO_(2) at 150℃.Employing a comprehensive suite of time-resolved analysis and characterization techniques,the evolution of sulfate species was systematically categorized into three stages:initial rapid surface sulfate accumulation,the transformation of surface sulfates to bulk metal sulfates,and partial sulfates decomposition after the removal of H2O and SO_(2).These findings indicate that bulk metal sulfates irreversibly deactivate the catalyst by distorting active component lattices and consuming oxygen vacancies,whereas surface sulfates(including ammonium sulfates and surface-coordinated metal sulfates)cause reversible performance loss through decomposition.Furthermore,the competitive adsorption of H2O and SO_(2) significantly influences the catalytic efficiency,with H2O suppressing SO_(2) adsorption while simultaneously enhancing the formation of Brönsted acid sites.This research underscores the critical role of sulfate dynamics on catalyst performance,revealing the enhanced SO_(2) resistance of the Eley-Rideal mechanism facilitated by the Ce-Ti support relative to the Langmuir-Hinshelwood pathway.Collectively,the study unravels the complex interplay of sulfate dynamics influencing catalyst performance and provides potential approaches to mitigate deactivation in demanding atmospheric conditions.
基金supported by Cultivating Fund Project of Hubei Hongshan Laboratory(2022hspy002).
文摘Here we report that the presence of MgCO_(3) stimulates the extracellular polymeric substance (EPS) secretion of Microcystis Aeruginosa (M. Aeruginosa). This stimulation led to a significant reduction in the total concentration of NH_(4)^(+)‒N by more than 86%, and effective recovery of PO_(4)^(3-)‒P within three days from concentrated wastewater (WW), although the secreted EPS inhibited the conversion of MgCO_(3) to specific crystal forms (MgNH4PO4.6H2O or MgHPO4.7H2O). Moreover, with an increase in PO_(4)^(3-) concentration in WW, these crystals appeared, thus the removal of NH_(4)^(+)‒N and PO_(4)^(3-)‒P nutrients can be attributed to the combined effect of M. Aeruginosa and MgCO_(3). We used Surface-Enhanced Raman Spectroscopy (SERS) combined with X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (FESEM-EDS), and X-ray Photoelectron Spectroscopy (XPS) to investigate the mechanism for competitive interactions between M. Aeruginosa and MgCO_(3) in removing NH_(4)^(+)‒N and PO_(4)^(3-)‒P. We identified that the bound EPS accumulated amorphous Mg–P–O dense particles on M. Aeruginosa, while soluble EPS, containing –COOH groups of humic-like substances decreased the pH of the solution and coordinated with Mg^(2+) ions. Therefore, both secreted bound and soluble EPS play a vital role in hindering the transformation of Mg^(2+) ions or MgCO_(3) to MgNH4PO4.6H2O or MgHPO4.7H2O crystals within WW, and they enhanced M. Aeruginosa 's ability in absorbing nutrients of NH_(4)^(+)‒N and PO_(4)^(3-)‒P. This mechanism plays a crucial role in the efficient recovery of NH_(4)^(+)‒N and PO_(4)^(3-)‒P from concentrated wastewater sources such as aerobically or anaerobically digested effluent from various sources like agriculture, livestock, and domestic wastewaters.
基金supported by the Shandong Provincial Natural Science Foundation(ZR2017MB020)Graduate Innovation Foundation of Yantai University(YDZD1816).
文摘With hexadecyl trimethyl ammonium bromide(CTAB)as the template,cobaltosic oxide precursors were hydrothermally synthesized.Co_(3)O_(4)catalysts were then prepared by calcining the cobaltosic oxide precursors,which was further modified by impregnation with K_(2)CO_(3) solution and used in the decomposition of N_(2)O.The catalysts were characterized by means of X-ray diffraction(XRD),nitrogen physisorption,scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),hydrogen temperature-programmed reduction(H_(2)-TPR),and oxygen temperature-programmed desorption(O_(2)-TPD);the effect of CTAB concentration,CTAB/cobalt molar ratio and urea/cobalt molar ratio on the catalytic activity of Co_(3)O_(4)was investigated.The results indicated that the Co_(3)O_(4)catalyst prepared by using 0.05 mol/L CTAB solution,with a CTAB to cobalt molar ratio of 1 and a urea to cobalt molar ratio of 4,exhibits high activity in N_(2)O decomposition.The catalytic performance of Co_(3)O_(4)can be further enhanced by modifying with K.Over the 0.02 K/Co_(3)O_(4)catalyst,the N_(2)O conversion remains over 91%at 400℃after conducting the N_(2)O decomposition reaction for 50 h in the presence of oxygen and steam.
基金Project supported by the National Natural Science Foundation of China(21876168)the Key Projects for Common Key Technology Innovation in Key Industries in Chongqing(cstc2016zdcy-ztzx0020-01)+1 种基金Youth Innovation Promotion Association CAS(2019376)the Graduate Innovation Project of Chongqing Technology and Business University(yjscxx201803-028-22)。
文摘The purpose of this work is to explore the effects of the introduction methods of Ce^4+and Zr^4+on the physicochemical properties,activity,and K tolerance of V2 O5-WO3/TiO2 catalyst for the selective catalytic reduction of NOx by NH3.Four different methods,namely pre-impregnation,post-impregnation,coimpregnation,and co-precipitation,were used to synthesize a series of V2 O5-WO3-TiO2-CeO2-ZrO2 catalysts.The catalysts were characterized by XRD,BET,NH3-TPD,XPS,and H2-TPR techniques.Moreover,the activity and anti-K poisoning performance were tested by an NH3-SCR model reaction.The results show that the introduction of Ce^4+and Zr^4+can improve the catalytic performance of V2O5-WO3/TiO2 catalyst,but the impregnation method cannot enhance the anti-K poisoning performance.Ce^4+and Zr^4+introduced by co-precipitation method can effectively improve the tolerance of K,which is mainly due to the incorporation of Ce^4+and Zr^4+into TiO2 lattice to form a uniform TiO2-CeO2-ZrO2 solid solution,resulting in the optimal surface acidity and redox performance,and reducing the decreases caused by Kpoisoning.Furthermore,based on the best introduction method,we further optimized the molar ratio of Ce^4+/Zr^4+,It is found that the catalyst exhibits the best anti-K poisoning performance when the molar ratio of Ce^4+/Zr^4+is 2:1.
基金supported by the National Natural Science Funds for Distinguished Young Scholar (No.20725723)the National Basic Research Program of China(No. 2010CB732300)the National High Technology Research and Development Program of China (No.2006AA06A310)
文摘Mesostructured Co3O4-CeO2 composite was found to be an effective catalytic material for the complete oxidation of benzene. The Co3O4-CeO2 catalysts with different Co/Ce ratios （mol/mol） were prepared via the nanocasting method and the mesostructure was replicated from two-dimensional （2D） hexagonal SBA-15 and three-dimensional （3D） cubic KIT-6 silicas, respectively. All the obtained Co3O4-CeO2 catalysts exhibited the similar symmetry with the parent silicas and well ordered mesostructures. The Co3O4- CeO2 catalysts with 2D mesostructure showed lower catalytic activities than the corresponding 3D materials. The Co3O4-CeO2 catalyst nanocasted from KIT-6 and with the Co/Ce ratio of 16/1 possessed the best catalytic benzene oxidation activity due to larger quantities of surface hydroxyl groups and surface oxygenated species. The mesostructured Co3O4-CeO2 material thus shows great potential as a promising eco-environmental catalyst for benzene effective elimination.
基金Project(2182040)supported by the Beijing Natural Science Foundation,ChinaProjects(51674026,51974025,U1802253)supported by the National Natural Science Foundation of ChinaProject(FRF-TT-19-001)supported by the Fundamental Research Funds for the Central Universities,China。
文摘An innovative technology,nitric acid pressure leaching of limonitic laterite ores,was proposed by our research team.The HNO3 regeneration is considerable significance for the improvement of the proposed technology and its commercial application,but it has not been systematically investigated.Herein,regenerating HNO3 from Ca(NO3)2 solution with low-cost H2SO4,and simultaneous synthesis of fibrous CaSO4·2H2O by-products were studied.As a theoretical basis,the solubility of CaSO4·2H2O in HNO3 medium is studied.It is concluded that the solubility of CaSO4·2H2O increases with increasing temperature or increasing HNO3 concentration,which has considerable guiding significance for the subsequent experimental research and analysis.Then,the effects of various factors on the residual Ca^2+ concentration of filtrate,the regenerated HNO3 concentration and the morphology of synthesized products are investigated using ICP-AES and SEM.And the effect mechanism is also analyzed.The results indicate the regenerated HNO3 concentration reaches 116 g/L with the residual Ca^2+ concentration being 9.7 g/L at the optimum conditions.Moreover,fibrous CaSO4·2H2O by-products with high aspect ratios(length,406.32μm;diameter,14.71μm;aspect ratio,27.62)can be simultaneously synthesized.
文摘Transition metal oxides are promising candidates for the high-capacity anode material in lithium-ion batteries.The electrochemical performance of transition metal oxides can be improved by constructing suitable composite architectures. Herein, we demonstrate a metal–organic framework(MOF)-assisted strategy for the synthesis of a hierarchical hybrid nanostructure composed of Fe_2O_3 nanotubes assembled in Co_3O_4 host. Starting from MOF composite precursors(Fe-based MOF encapsulated in a Cobased host matrix), a complex structure of Co_3O_4 host and engulfed Fe_2O_3 nanotubes was prepared by a simple annealing treatment in air. By virtue of their structural and compositional features, these hierarchical composite particles reveal enhanced lithium storage properties when employed as anodes for lithium-ion batteries.
基金Ting-ting FENG acknowledges the financial support from Professor Paul V.BRAUN at Department of Materials Science and Engineering,University of Illinois at Urbana-Champaign,the support from Chinese Scholarship Council during her visit to University of Illinois at Urbana-Champaign,partial financial supports from Department of Science and Technology of Sichuan Province,China(2019YFH0002,2019YFG0222 and 2019YFG0526).The research was partly carried out in the Frederick Seitz Materials Research Laboratory Central Research Facilities,University of Illinois at Urbana-Champaign.
文摘The hierarchical ZnMn2O4/Mn3O4 composite sub-microrods were synthesized via a water-in-oil microemulsion method followed by calcination.The ZnMn2O4/Mn3O4 electrode displays an intriguing capacity increasing from 440 to 910 mA·h/g at 500 mA/g during 550 consecutive discharge/charge cycles,and delivers an ultrahigh capacity of 1276 mA·h/g at 100 mA/g,which is much greater than the theoretical capacity of either ZnMn2O4 or Mn3O4 electrode.To investigate the underlying mechanism of this phenomenon,cyclic voltammetry and differential capacity analysis were applied,both of which reveal the emergence and the growth of new reversible redox reactions upon charge/discharge cycling.The new reversible conversions are probably the results of an activation process of the electrode material during the cycling process,leading to the climbing charge storage.However,the capacity exceeding the theoretical value indicates that there are still other factors contributing to the increasing capacity.
