In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lit...In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lithium iron phosphate(LFP)batteries.The TR process caused by overheating LFP batteries is usually divided into four stages,with high temperatures and fire risks.High-rate charge and discharge damage the internal morphology and structural stability of materials seriously.The TR behavior of battery is fully aggravated,which is further manifested by the advanced opening of the safety vent,release of gas and occurrence of TR.With the increase of charging rate,the deteriorated TR characteristics can be discerned,such as the lower TR temperature,the shorter TR time,and the more serious TR consequences.Such changes can be assigned to the decline of battery stability.In addition,the battery SOC greatly impacts safety,especially the flame temperature and the severity of consequences.As for the 100%SOC battery cycled at 4 C,there is still a high risk of thermal runaway propagation at the position 1 m far away from the battery.This work helps to realize the TR and fire features of battery in-depth,enlightening the safety protection of battery.展开更多
Fast-charging technology is indeed a critical technical problem for electric vehicles today.Improving the conductivity of electrode materials is one of the effective ways to solve this technical bottleneck.Here,we inc...Fast-charging technology is indeed a critical technical problem for electric vehicles today.Improving the conductivity of electrode materials is one of the effective ways to solve this technical bottleneck.Here,we incorporated highly conductive MXene and carbon nanotubes into the electrode materials of Li_(4)Ti_(5)O_(12)(LTO)and LiFePO_(4)(LFP)to construct the composite electrode material 3D-LTO-CNT-MXene and 3D-LFP-CNT-MXene(named 3D-LTO and 3D-LFP).The 3D-LTO we synthesized demonstrated an impressive capacity of 146.2 mAh g^(-1)at a 20C rate(where 1C=175 mA g^(-1)),the 3D-LFP material exhibited a capacity of 104.6 mAh g^(-1)at a 20C rate(where 1C=170 mA g^(-1)).This remarkable rate capability can be attributed to the constructed three-dimensional conductive network,which facilitates enhanced electrical conductivity and electron migration rates,thereby promoting rapid charging and discharging of the batteries.Furthermore,we assembled a 3D-LTO‖3D-LFP full cell,which demonstrated exceptional performance at a high rate of 10C(1C=170 mA g^(-1)),achieving an energy density of 68.34 Wh kg^(-1)and a power density of 1547.5 W kg^(-1).This work demonstrates the feasibility of constructing 3D highly conductive electrode materials for rapid charging and discharging at high rates.It paves the way for the commercial application of truly ultra-fast charging in electric vehicles.展开更多
Carbon-based electric double layer capacitors(EDLCs)hold tremendous potentials due to their high-power performance and excellent cycle stability.However,the practical use of EDLCs is limited by the low energy density ...Carbon-based electric double layer capacitors(EDLCs)hold tremendous potentials due to their high-power performance and excellent cycle stability.However,the practical use of EDLCs is limited by the low energy density in aqueous electrolyte and sluggish diffusion kinetics in organic or/and ionic liquids electrolyte.Herein,3D carbon frameworks(3DCFs)constructed by interconnected nanocages(10-20 nm)with an ultrathin wall of ca.2 nm have been fabricated,which possess high specific surface area,hierarchical porosity and good conductive network.After deoxidization,the deoxidized 3DCF(3DCFDO)exhibits a record low IR drop of 0.064 V at 100 A g^−1 and ultrafast charge/discharge rate up to 10 V s^−1.The related device can be charged up to 77.4%of its maximum capacitance in 0.65 s at 100 A g^−1 in 6 M KOH.It has been found that the 3DCF-DO has a great affinity to EMIMBF4,resulting in a high specific capacitance of 174 F g^−1 at 1 A g^−1,and a high energy density of 34 Wh kg^−1 at an ultrahigh power density of 150 kW kg^−1 at 4 V after a fast charge in 1.11 s.This work provides a facile fabrication of novel 3D carbon frameworks for supercapacitors with ultrafast charge/discharge rate and high energy-power density.展开更多
Spherical Ni（OH）2 particles were prepared by an aqueous solution precipitation route. The structure of spherical Ni（OH）2 was investigated by scanning electron microscopy and transmission electron microscopy and co...Spherical Ni（OH）2 particles were prepared by an aqueous solution precipitation route. The structure of spherical Ni（OH）2 was investigated by scanning electron microscopy and transmission electron microscopy and compared with that of traditional Ni（OH）2. The results show that the spherical nickel hydroxide consists of （Ni（OH）2） spheres with a reticulate structure of platelet-like, which is almost arranged radially and the crystalline grains intervene and connect with each other to form a three-dimensional net. The spherical Ni（OH）2 particle is full of pores, crannies between cleave planes. It is supposed that this structure is beneficial to the structural stability for the spherical particles during the charge/discharge processes and can improve the cycle life of the electrode; the pores and the crannies in spherical particles can shorten the proton diffusion distance and speed its velocity, which may result in that the local polarization is lowered. The electrochemical performances of the spherical Ni（OH）2 are improved by enhancing the conducting properties of the crystalline lattice due to its quick proton diffusion.展开更多
Theoretical study on the electronic structures and related properties of 2,2,6,6-tetramethyl- l-piperidinyloxy （TEMPO） and its cationic lipid derivates in the charge/discharge processes has been carried out using th...Theoretical study on the electronic structures and related properties of 2,2,6,6-tetramethyl- l-piperidinyloxy （TEMPO） and its cationic lipid derivates in the charge/discharge processes has been carried out using the density functional theory （DFT） at the （U）B3LYP/6-31G（d,p） or 6-31＋G（d,p） level. The changes and regularities of geometric and electronic properties of these compounds in the charge/discharge processes were revealed in detail. The compu- tational results show that the substitute group plays a very important role in the electronic structures and related properties of TEMPOs during the charge/discharge processes. It is very interesting to find that after getting an electron, TEMPO is more stable in singlet state but the lipid is more stable in triplet state. For TEMPO, both the charge and the discharge processes greatly influence the electronic properties of N and O atoms of the radical part. For the cationic lipid, the discharge process mainly influences the pyridinium head and the charge process mainly influences the free radical head. Moreover, the solvent effect plays an important role in some bond lengths and the charge population of the free radical head. In addition, the UV-Vis absorption spectra simulated using TDDFT at the 6-31G（d,p） with the experimental ones. of TEMPO and the lipid were calculated and or 6-31＋G（d,p） level, in satisfying agreement展开更多
The derivative of charge and discharge curves (d t /d E vs E plot) can be used to describe the charge and discharge process more exactly. The d t /d E ? 獷 plots of nickel hydroxide electrode at different charge/disch...The derivative of charge and discharge curves (d t /d E vs E plot) can be used to describe the charge and discharge process more exactly. The d t /d E ? 獷 plots of nickel hydroxide electrode at different charge/discharge rates and intermittent discharge experiment are discussed. Though the d t /d E ? 獷 plot is affected by many factors, it clearly has intrinsic relation with the nature of active material such as conductivity and thermodynamic potential of active material, which changes with the state of charge. The d t /d E—E plot can also be applied to other electrochemical active materials, especially to those having several phases during charge or discharge.展开更多
While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfa...While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.展开更多
Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have n...Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have not been thoroughly investigated.In this study,multiple tracers(hydrochemistry,𝛿D,𝛿18O and 222Rn)were used to compare mechanisms of LGD in Daihai and Ulansuhai Lake in Inner Mongoli1,Northwest China.The hydrochemical types showed a trend from groundwater to lake water,indicating a hydraulic connection between them.In addition,the𝛿D and𝛿18O values of sediment pore water were between the groundwater and lake water,indicating the LGD processes.The radon mass balance model was used to estimate the average groundwater discharge rates of Daihai and Ulansuhai Lake,which were 2.79 mm/day and 3.02 mm/day,respectively.The total nitrogen(TN),total phosphorus(TP),and fluoride inputs associated with LGD in Daihai Lake accounted for 97.52%,96.59%,and 95.84%of the total inputs,respectively.In contrast,TN,TP and fluoride inputs in Ulansuhai Lake were 53.56%,40.98%,and 36.25%,respectively.This indicates that the pollutant inputs associated with LGD posed a potential threat to the ecological stability of Daihai and Ulansuhai Lake.By comparison,the differences of LGD process and associated pollutant flux were controlled by hydrogeological conditions,lakebed permeability and human activities.This study provides a reference for water resources management in Daihai and Ulansuhai Lake basins while improving the understanding of LGD in the Yellow River basin.展开更多
This study exhibits a design of the discharge product film of a bulk AZ63-Ce-La-Ca(AZ63X)anode for Mg-air battery.An ideal discharge product film for Mg anode is that it could inhibit the anodic hydrogen evolution but...This study exhibits a design of the discharge product film of a bulk AZ63-Ce-La-Ca(AZ63X)anode for Mg-air battery.An ideal discharge product film for Mg anode is that it could inhibit the anodic hydrogen evolution but does not hinder the transfer of the electrons at the interface.Fortunately,the addition of Ce,La,and Ca into AZ63 alloy achieves this goal.The Mg-air battery with AZ63X anode in 3.5%Na Cl has an ultrahigh anodic efficiency of 85.7±1.7%and energy-density of 2431±53 mWh g^(-1)with the unique discharge product film,surpassing the values of most reported Mg-air batteries.Furthermore,the alloying elements reduce the anode delamination effect significantly by transforming the block Mg_(17)Al_(12)phase into the connected Mg_(17)Al_(12)structure and fine rod Al_(2)RE and Al_(2)Ca.展开更多
A novel precipitate-free Mg-0.1Sn anode with a homogeneous equal-axis grain structure was developed and rolled successfully at 573 K.Electrochemical test results indicate that the Mg-0.1Sn alloy exhibits enhanced anod...A novel precipitate-free Mg-0.1Sn anode with a homogeneous equal-axis grain structure was developed and rolled successfully at 573 K.Electrochemical test results indicate that the Mg-0.1Sn alloy exhibits enhanced anode dissolution kinetics.A Mg-air battery prepared using this anode exhibits a cell voltage of 1.626 V at 0.5 mA/cm^(2),reasonable anodic efficiency of 58.17%,and good specific energy of 1730.96 mW·h/g at 10 mA/cm^(2).This performance is attributed to the effective reactive anode surface,the suppressed chunk effect,and weak self-corrosion owing to the homogeneous basal texture.展开更多
To enhance the operational capacity and space utilization of baffle-drop shafts,this study improved the traditional baffle-drop shaft by expanding the wet-side space,incorporating large rotation-angle baffles,and inst...To enhance the operational capacity and space utilization of baffle-drop shafts,this study improved the traditional baffle-drop shaft by expanding the wet-side space,incorporating large rotation-angle baffles,and installing overflow holes in the dividing wall.A three-dimensional turbulent model was developed using ANSYS Fluent to simulate the hydraulic characteristics of both traditional and new baffle-drop shafts across various flow rates.The simulation results demonstrated that the new shaft design allowed for discharge from both the wet and dry sides,significantly improving operational capacity,with the dry side capable of handling 40%of the inlet flow.Compared to the traditional shaft,the new design reduced shaft wall pressures and decreased the mean and standard deviation of pressure on typical baffles by 21%and 63%,respectively,therefore enhancing structural safety.Additionally,the new shaft achieved a 2%-12%higher energy dissipation rate than the traditional shaft across different flow rates.This study offers valuable insights for the design and optimization of drop shafts in deep tunnel drainage systems.展开更多
The deposition layer on the discharge channel wall of a Hall thruster after long-term operation occasionally detaches from the wall and interferes with the plasma inside the channel,resulting in current pulse and thre...The deposition layer on the discharge channel wall of a Hall thruster after long-term operation occasionally detaches from the wall and interferes with the plasma inside the channel,resulting in current pulse and threatening the power supply.To understand the generation mechanism of the current pulse,the interaction between the peeling material and the channel plasma was studied by the particle-in-cell and Monte Carlo collision(PIC/MCC)method.The plasma evolution and distribution in the Hall thruster channel when peeling material existed were simulated.Simulation results show that the peeling material changes the electron transportation and ionization,and the effects are related to the position of the peeling material.When the peeling material invades the zone where the ionization rate is originally the highest without peeling material,the ionization process is almost terminated.The ionization suppression by the peeling material will cause the propellant gas to refill the channel exit.As the peeling material moves away,gas discharge is induced near the channel exit,resulting in anode current pulse.展开更多
Semiconductor electronic devices are prone to charge accumulation during production and transportation,which usually causes device breakdown.Ionizers are widely used for electrostatic elimination,and utilizing semicon...Semiconductor electronic devices are prone to charge accumulation during production and transportation,which usually causes device breakdown.Ionizers are widely used for electrostatic elimination,and utilizing semiconductor silicon for the discharge needle material in ionizers can effectively prevent metal contamination.To investigate the discharge characteristics of silicon needles and their mode modulation mechanism,this study has established an experimental platform for silicon needle-plate discharge under positive polarity voltage.Discharge pulse parameters and optical signals were measured at varying electrode spacings.The experimental results reveal that silicon needle discharge progresses through four regimes:the spontaneous streamer,the periodic streamer,the cluster streamer,and the glow discharge.Among these,the pulse amplitude is most uniform and stable in the periodic streamer regime.In addition,shorter-gap discharge exhibits higher pulse amplitude and repetition frequency but is easier to transition into the filament regime.The formation process of a single pulse is closely related to the field strength in the ionization region near the needle tip.Hence,parameters such as the pulse rising edge time and falling edge time show minimal variation with voltage.The amount of charge generated per unit time is primarily influenced by the repetition frequency.Consequently,the electrostatic ionizer produces the highest,most stable,and most uniform charges if it operates in the periodic streamer regime.展开更多
To explore the electrostatic discharge behavior of charged powders in industrial silos,discharge experiments are conducted based on a full-size industrial silo discharge platform.Electrostatic discharge mode,frequency...To explore the electrostatic discharge behavior of charged powders in industrial silos,discharge experiments are conducted based on a full-size industrial silo discharge platform.Electrostatic discharge mode,frequency,and energy are investigated for powders of different polarities.Although the powders have low charge-to-mass ratios(+0.087μC/kg for the positively charged powders and−0.26μC/kg for the negatively charged ones),electrostatic discharges occur approximately every 10 s,with the maximum discharge energy being 800 mJ.Powder polarity considerably influences discharge energy.The positive powders exhibit higher discharge energy than the negative ones,although discharge frequency remains similar for both.Effects of powder charge,humidity,and mass flow on discharge frequency and discharge energy are quantitatively analyzed,providing important insights for the improvement of safety in industrial powder handling.展开更多
Based on a homemade novel dielectric barrier discharge actuator with a rotating high-voltage electrode, this study investigates the influence of electrode rotating speed on the discharge characteristics, and the mecha...Based on a homemade novel dielectric barrier discharge actuator with a rotating high-voltage electrode, this study investigates the influence of electrode rotating speed on the discharge characteristics, and the mechanisms of discharge process under rotary conditions are discussed. The results demonstrate that when the high-voltage electrode is rotating,the distribution patterns of dielectric barrier discharge and the parameters of micro-discharge channels exhibit significant changes. Under a low rotating speed, the discharge patterns present as a series of separated discharge channels, resulting in uniform charge distribution but uneven electric field distribution in the gap. As the rotating speed increases, the electric field and the discharge channels will be affected by the rotation, so the electric field is more evenly distributed in the gap, and the discharge mode changes to a quasi-uniform discharge. With increasing distance from the rotation axis, the electric field strength gradually decreases, and the electric field force experienced by the micro-discharge channels during its formation weakens. Consequently, the average size of the micro-discharge channels increases, indicating that these channels are gradually stretched. The rotation of the electrode generates a significant number of accumulated charges, impacting the number of micro-discharge channels. The number of micro-discharge channels at the center of the electrode increases with rotating speed;however, due to channel stretching, the average size of the micro-discharge channels at the edge of the electrode also increases, leading to a decrease in their overall quantity. The research results reveal the significant impact of the electrode rotation on the characteristics of discharge channels, providing a theoretical basis for further optimal design of the rotating dielectric barrier discharge in various application.展开更多
Research has been carried out on a hybrid discharge ion thruster,aiming to combine the advantages of Direct Current(DC)discharge ion thrusters(known for their high thrust density and high power supply efficiency)with ...Research has been carried out on a hybrid discharge ion thruster,aiming to combine the advantages of Direct Current(DC)discharge ion thrusters(known for their high thrust density and high power supply efficiency)with microwave discharge ion thrusters(which do not require a hollow cathode and are capable of efficient ionization at low pressures).Comparative experiments with different anode structures and single-probe diagnostics revealed that applying a DC bias voltage created a new ionization zone based on microwave discharge.This DC bias increased the sheath potential of the screen grid and led to an elevation in electron temperature and plasma density.It is speculated that the reduced loss of high-energy electrons generated by microwave discharge at the screen grid is the primary reason for the enhanced discharge.By adding a DC bias of approximately 50 V to the microwave discharge,the screen grid current was doubled without a significant increase in discharge power consumption.Under appropriate bias voltages that consider minimizing ion sputtering,DC bias holds promise as a design approach to increase the extracted beam current in microwave ion thrusters.展开更多
Objective:To investigate the application effect of the discharge preparation plan based on the ADOPT nursing model in patients with first-visit ischemic stroke.Methods:Eighty patients with first-visit ischemic stroke ...Objective:To investigate the application effect of the discharge preparation plan based on the ADOPT nursing model in patients with first-visit ischemic stroke.Methods:Eighty patients with first-visit ischemic stroke admitted to our hospital from June 1,2024 to November 31,2024 were selected and divided into a control group(June 1,2024 to August 30,2024)and an intervention group(September 1,2024 to November 31,2024)according to different admission times,with 40 cases in each group.The control group received routine care and discharge guidance,while the intervention group received a discharge preparation plan based on the ADOPT model on the basis of routine care.The discharge readiness[Discharge Readiness Scale(RHDS)]of patients on the day of discharge was compared.Self-efficacy at 3 months after discharge[evaluated using the Chronic Disease Self-Efficacy Scale(SECD6)],activities of daily living[evaluated using the Barthel index(BI)],blood glucose and blood pressure indicators(diastolic blood pressure,systolic blood pressure,FPG,2 h PG),and readmission rate within 3 months after discharge were also compared between the two groups.Results:On the day of discharge,the RHDS-related dimension scores of the intervention group were higher than those of the control group(t=17.993,8.560,10.243,p<0.05);Three months after discharge,the SECD6 score and BI score of the intervention group were higher than those of the control group(t=8.910,10.899,both p<0.05);Systolic blood pressure,diastolic blood pressure,FPG and 2h PG in the intervention group were lower than those in the control group(t=8.868,4.794,3.829,7.121,all p<0.05);Within 3 months after discharge,the readmission rate of the intervention group was lower than that of the control group(χ^(2)=5.165,2 p<0.05).Conclusion:The discharge preparation plan based on the ADOPT nursing model,when applied to patients with first-visit ischemic stroke,can not only enhance self-efficacy and discharge preparation,improve activities of daily living,but also optimize blood glucose and blood pressure indicators and reduce the readmission rate,which is worthy of reference.展开更多
Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was d...Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was designed to simulate wound conditions, with gelatin used to simulate wound tissue. The distinction between open and confined spaces was explored, and the effects of temperature, humidity, discharge power and the gap size within the confined space on the plasma characteristics were analyzed. It was found that temperature, humidity and discharge power are important factors that affect the concentration distribution of active components and the mode transition between ozone and nitrogen oxides. Compared to open space, the concentration of ozone in confined space was relatively lower, which facilitated the formation of nitrogen oxides. In open space, the discharge was dominated by ozone initially. As the temperature,humidity and discharge power increased, nitrogen oxides in the gas-phase products were gradually detected. In confined space, nitrogen oxides can be detected at an early stage and at much higher concentrations than ozone concentration. Furthermore, as the gap of the confined space decreased, the concentration of ozone was observed to decrease while that of nitrate increased, and the rate of this concentration change was further accelerated at higher temperature and higher power. It was shown that ozone concentration decreased from 0.11 to 0.03 μmol and the nitrate concentration increased from 20.5 to 24.5 μmol when the spacing in the confined space was reduced from 5 to 1 mm, the temperature of the external discharge was controlled at 40 ℃, and the discharge power was 12 W. In summary, this study reveals the formation and transformation mechanisms of active substances in air surface micro-discharge plasma within confined space, providing foundational data for its medical applications.展开更多
Seawater desalination has been considered an important solution for water scarcity in coastal areas.Morocco,with its 3,500 km long coastline,has seen significant growth in population and industrial activities in recen...Seawater desalination has been considered an important solution for water scarcity in coastal areas.Morocco,with its 3,500 km long coastline,has seen significant growth in population and industrial activities in recent years.The dams that supply water to most regions of Morocco have faced periods of drought.This led the government to start a large-scale seawater desalination project that shall produce over 2 MM m^(3)/year.The most common environmental impact associated with desalination plants is the high concentration brine discharge which can alter the physical,chemical,and biological properties of the receiving water body,In fact,the increasing number of desalination plants along the coastline amplifies the potential risks that brine discharges pose to marine ecosystems.This highlights the critical need for regulations to manage pollutant concentrations in water,both at the discharge point(Effluent Standards-ES)and in the receiving environment(Ambient Standards-AS).Law 36-15,in its Article 72,grants any natural or legal person,whether public or private,the right to carry out seawater desalination to meet their own water needs or those of other users,in accordance with current legislation and regulations.However,the definition of regulations concerning marine environmental aspects and the substantial limits for discharges has not yet been specified.Indeed,these regulations will need to be developed with due consideration for the local biodiversity.These regulations should also take into account the technical criteria required to determine the compliance point and define the boundaries of the brine discharge impact zone.展开更多
The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density ...The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density 1×10^(6) m^(-3) under 29 kV DC voltage.The result shows that the discharge process was completed within 11.8 ns from seed electron triggering,avalanche bulking to streamer extending until gap eventually breakdown.The entire gap breakdown process was divided into three discharge stages,namely,the initial discharge triggered(0-4 ns),avalanche(4-7 ns)and streamer phase(7-11.8 ns).At the same time,the facts were also revealed that the discharge evolution,electric field distribution,and electron density had different values,and also showed different temporal and spatial distribution characteristics along the axis of the discharge gap.Specifically,the discharge characteristics of SCN2 under 1,2,3,4,4.5,and 5 MPa at 127 K were theoretically analyzed respectively,and the microscopic mechanisms of the breakdown process were also detailed.The results indicate that the gas discharge law remained applicable within the 1-3 MPa range.However,the discharge characteristics of supercritical nitrogen at 3.4-5 MPa differed significantly from those at lower pressures,likely attributable to the unique state of matter exhibited by supercritical nitrogen.This study contributes to understanding the discharge mechanism of supercritical nitrogen and offers theoretical guidance for its practical application in the power industry.展开更多
基金supported by the National Key Research and Development Plan(2023YFC3009900)the National Natural Science Foundation of China(52104197,52272396,52474233)+3 种基金Hongkong Scholar Program(XJ2022022)Research Grants Council of the Hong Kong Special Administrative Region(City U11214221)Natural Science Foundation of the Jiangsu Higher Education Institutions(21KJB620001)the Open Fund of the State Key Laboratory of Fire Science(SKLFS)Program(HZ2022-KF04)。
文摘In this work,a series of experiments are carried out to investigate the effect of charge/discharge rates(1,2,3 and 4 C)and state of charges(SOCs,namely 0%,50%,75%and 100%)on thermal runaway(TR)and fire behavior of lithium iron phosphate(LFP)batteries.The TR process caused by overheating LFP batteries is usually divided into four stages,with high temperatures and fire risks.High-rate charge and discharge damage the internal morphology and structural stability of materials seriously.The TR behavior of battery is fully aggravated,which is further manifested by the advanced opening of the safety vent,release of gas and occurrence of TR.With the increase of charging rate,the deteriorated TR characteristics can be discerned,such as the lower TR temperature,the shorter TR time,and the more serious TR consequences.Such changes can be assigned to the decline of battery stability.In addition,the battery SOC greatly impacts safety,especially the flame temperature and the severity of consequences.As for the 100%SOC battery cycled at 4 C,there is still a high risk of thermal runaway propagation at the position 1 m far away from the battery.This work helps to realize the TR and fire features of battery in-depth,enlightening the safety protection of battery.
基金supported by Xinjiang Uygur Autonomous Region Graduate Research Innovation Project (No.XJ2024G195)Xinjiang Key Research and Development Project (No.2021B01001-1)+2 种基金the National Natural Science Foundation of China (No.22169020)the Natural Science Foundation of University in Jiangsu province (No.22KJB150003)the National Natural Science Foundation of China (No.22309068)
文摘Fast-charging technology is indeed a critical technical problem for electric vehicles today.Improving the conductivity of electrode materials is one of the effective ways to solve this technical bottleneck.Here,we incorporated highly conductive MXene and carbon nanotubes into the electrode materials of Li_(4)Ti_(5)O_(12)(LTO)and LiFePO_(4)(LFP)to construct the composite electrode material 3D-LTO-CNT-MXene and 3D-LFP-CNT-MXene(named 3D-LTO and 3D-LFP).The 3D-LTO we synthesized demonstrated an impressive capacity of 146.2 mAh g^(-1)at a 20C rate(where 1C=175 mA g^(-1)),the 3D-LFP material exhibited a capacity of 104.6 mAh g^(-1)at a 20C rate(where 1C=170 mA g^(-1)).This remarkable rate capability can be attributed to the constructed three-dimensional conductive network,which facilitates enhanced electrical conductivity and electron migration rates,thereby promoting rapid charging and discharging of the batteries.Furthermore,we assembled a 3D-LTO‖3D-LFP full cell,which demonstrated exceptional performance at a high rate of 10C(1C=170 mA g^(-1)),achieving an energy density of 68.34 Wh kg^(-1)and a power density of 1547.5 W kg^(-1).This work demonstrates the feasibility of constructing 3D highly conductive electrode materials for rapid charging and discharging at high rates.It paves the way for the commercial application of truly ultra-fast charging in electric vehicles.
基金the financial support from the National Natural Science Foundation of China(51672033,U1610255,U1703251).
文摘Carbon-based electric double layer capacitors(EDLCs)hold tremendous potentials due to their high-power performance and excellent cycle stability.However,the practical use of EDLCs is limited by the low energy density in aqueous electrolyte and sluggish diffusion kinetics in organic or/and ionic liquids electrolyte.Herein,3D carbon frameworks(3DCFs)constructed by interconnected nanocages(10-20 nm)with an ultrathin wall of ca.2 nm have been fabricated,which possess high specific surface area,hierarchical porosity and good conductive network.After deoxidization,the deoxidized 3DCF(3DCFDO)exhibits a record low IR drop of 0.064 V at 100 A g^−1 and ultrafast charge/discharge rate up to 10 V s^−1.The related device can be charged up to 77.4%of its maximum capacitance in 0.65 s at 100 A g^−1 in 6 M KOH.It has been found that the 3DCF-DO has a great affinity to EMIMBF4,resulting in a high specific capacitance of 174 F g^−1 at 1 A g^−1,and a high energy density of 34 Wh kg^−1 at an ultrahigh power density of 150 kW kg^−1 at 4 V after a fast charge in 1.11 s.This work provides a facile fabrication of novel 3D carbon frameworks for supercapacitors with ultrafast charge/discharge rate and high energy-power density.
基金Project(50134020) supported by the National Natural Science Foundation of China
文摘Spherical Ni（OH）2 particles were prepared by an aqueous solution precipitation route. The structure of spherical Ni（OH）2 was investigated by scanning electron microscopy and transmission electron microscopy and compared with that of traditional Ni（OH）2. The results show that the spherical nickel hydroxide consists of （Ni（OH）2） spheres with a reticulate structure of platelet-like, which is almost arranged radially and the crystalline grains intervene and connect with each other to form a three-dimensional net. The spherical Ni（OH）2 particle is full of pores, crannies between cleave planes. It is supposed that this structure is beneficial to the structural stability for the spherical particles during the charge/discharge processes and can improve the cycle life of the electrode; the pores and the crannies in spherical particles can shorten the proton diffusion distance and speed its velocity, which may result in that the local polarization is lowered. The electrochemical performances of the spherical Ni（OH）2 are improved by enhancing the conducting properties of the crystalline lattice due to its quick proton diffusion.
文摘Theoretical study on the electronic structures and related properties of 2,2,6,6-tetramethyl- l-piperidinyloxy （TEMPO） and its cationic lipid derivates in the charge/discharge processes has been carried out using the density functional theory （DFT） at the （U）B3LYP/6-31G（d,p） or 6-31＋G（d,p） level. The changes and regularities of geometric and electronic properties of these compounds in the charge/discharge processes were revealed in detail. The compu- tational results show that the substitute group plays a very important role in the electronic structures and related properties of TEMPOs during the charge/discharge processes. It is very interesting to find that after getting an electron, TEMPO is more stable in singlet state but the lipid is more stable in triplet state. For TEMPO, both the charge and the discharge processes greatly influence the electronic properties of N and O atoms of the radical part. For the cationic lipid, the discharge process mainly influences the pyridinium head and the charge process mainly influences the free radical head. Moreover, the solvent effect plays an important role in some bond lengths and the charge population of the free radical head. In addition, the UV-Vis absorption spectra simulated using TDDFT at the 6-31G（d,p） with the experimental ones. of TEMPO and the lipid were calculated and or 6-31＋G（d,p） level, in satisfying agreement
文摘The derivative of charge and discharge curves (d t /d E vs E plot) can be used to describe the charge and discharge process more exactly. The d t /d E ? 獷 plots of nickel hydroxide electrode at different charge/discharge rates and intermittent discharge experiment are discussed. Though the d t /d E ? 獷 plot is affected by many factors, it clearly has intrinsic relation with the nature of active material such as conductivity and thermodynamic potential of active material, which changes with the state of charge. The d t /d E—E plot can also be applied to other electrochemical active materials, especially to those having several phases during charge or discharge.
基金supported by National Key Research and Development Program of China(2022YFB3804902,2022YFB3804900)the National Natural Science Foundation of China(52203226,52161145406,42376045)the Fundamental Research Funds for the Central Universities(2232024Y-01,2232025D-02).
文摘While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.
基金supported by the Natural Science Foundation of Inner Mongolia Autonomous Region of China(No.2023QN04011)the National Natural Science Foundation of China(Nos.42307092 and 52279067)+1 种基金Ordos Science and Technology Major Project(No.ZD20232303)Project of Key Laboratory of River and Lake in Inner Mongolia Autonomous Region(No.2022QZBZ0003).
文摘Lacustrine groundwater discharge(LGD)plays an important role in water resources management.Previous studies have focused on LGD process in a single lake,but the differences in LGD process within the same region have not been thoroughly investigated.In this study,multiple tracers(hydrochemistry,𝛿D,𝛿18O and 222Rn)were used to compare mechanisms of LGD in Daihai and Ulansuhai Lake in Inner Mongoli1,Northwest China.The hydrochemical types showed a trend from groundwater to lake water,indicating a hydraulic connection between them.In addition,the𝛿D and𝛿18O values of sediment pore water were between the groundwater and lake water,indicating the LGD processes.The radon mass balance model was used to estimate the average groundwater discharge rates of Daihai and Ulansuhai Lake,which were 2.79 mm/day and 3.02 mm/day,respectively.The total nitrogen(TN),total phosphorus(TP),and fluoride inputs associated with LGD in Daihai Lake accounted for 97.52%,96.59%,and 95.84%of the total inputs,respectively.In contrast,TN,TP and fluoride inputs in Ulansuhai Lake were 53.56%,40.98%,and 36.25%,respectively.This indicates that the pollutant inputs associated with LGD posed a potential threat to the ecological stability of Daihai and Ulansuhai Lake.By comparison,the differences of LGD process and associated pollutant flux were controlled by hydrogeological conditions,lakebed permeability and human activities.This study provides a reference for water resources management in Daihai and Ulansuhai Lake basins while improving the understanding of LGD in the Yellow River basin.
基金supported by the National Natural Science Foundation of China(52471095)National Key Research and Development Program of China(Grant No.2023YFC2811404)Natural Science Foundation of Xiamen,China(No.3502Z20227015)。
文摘This study exhibits a design of the discharge product film of a bulk AZ63-Ce-La-Ca(AZ63X)anode for Mg-air battery.An ideal discharge product film for Mg anode is that it could inhibit the anodic hydrogen evolution but does not hinder the transfer of the electrons at the interface.Fortunately,the addition of Ce,La,and Ca into AZ63 alloy achieves this goal.The Mg-air battery with AZ63X anode in 3.5%Na Cl has an ultrahigh anodic efficiency of 85.7±1.7%and energy-density of 2431±53 mWh g^(-1)with the unique discharge product film,surpassing the values of most reported Mg-air batteries.Furthermore,the alloying elements reduce the anode delamination effect significantly by transforming the block Mg_(17)Al_(12)phase into the connected Mg_(17)Al_(12)structure and fine rod Al_(2)RE and Al_(2)Ca.
基金partially supported by the National Natural Science Foundation of China(No.51901153)Shanxi Scholarship Council of China(No.2019032)+1 种基金the Natural Science Foundation of Shanxi,China(No.202103021224049)the Shanxi Zhejiang University New Materials and Chemical Research Institute Scientific Research Project,China(No.2022SX-TD025)。
文摘A novel precipitate-free Mg-0.1Sn anode with a homogeneous equal-axis grain structure was developed and rolled successfully at 573 K.Electrochemical test results indicate that the Mg-0.1Sn alloy exhibits enhanced anode dissolution kinetics.A Mg-air battery prepared using this anode exhibits a cell voltage of 1.626 V at 0.5 mA/cm^(2),reasonable anodic efficiency of 58.17%,and good specific energy of 1730.96 mW·h/g at 10 mA/cm^(2).This performance is attributed to the effective reactive anode surface,the suppressed chunk effect,and weak self-corrosion owing to the homogeneous basal texture.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFD1700802).
文摘To enhance the operational capacity and space utilization of baffle-drop shafts,this study improved the traditional baffle-drop shaft by expanding the wet-side space,incorporating large rotation-angle baffles,and installing overflow holes in the dividing wall.A three-dimensional turbulent model was developed using ANSYS Fluent to simulate the hydraulic characteristics of both traditional and new baffle-drop shafts across various flow rates.The simulation results demonstrated that the new shaft design allowed for discharge from both the wet and dry sides,significantly improving operational capacity,with the dry side capable of handling 40%of the inlet flow.Compared to the traditional shaft,the new design reduced shaft wall pressures and decreased the mean and standard deviation of pressure on typical baffles by 21%and 63%,respectively,therefore enhancing structural safety.Additionally,the new shaft achieved a 2%-12%higher energy dissipation rate than the traditional shaft across different flow rates.This study offers valuable insights for the design and optimization of drop shafts in deep tunnel drainage systems.
基金supported by National Natural Science Foundation of China(No.U23B20152).
文摘The deposition layer on the discharge channel wall of a Hall thruster after long-term operation occasionally detaches from the wall and interferes with the plasma inside the channel,resulting in current pulse and threatening the power supply.To understand the generation mechanism of the current pulse,the interaction between the peeling material and the channel plasma was studied by the particle-in-cell and Monte Carlo collision(PIC/MCC)method.The plasma evolution and distribution in the Hall thruster channel when peeling material existed were simulated.Simulation results show that the peeling material changes the electron transportation and ionization,and the effects are related to the position of the peeling material.When the peeling material invades the zone where the ionization rate is originally the highest without peeling material,the ionization process is almost terminated.The ionization suppression by the peeling material will cause the propellant gas to refill the channel exit.As the peeling material moves away,gas discharge is induced near the channel exit,resulting in anode current pulse.
基金financially supported by Wuxi Yanping Electronic Technology Co.Ltd.
文摘Semiconductor electronic devices are prone to charge accumulation during production and transportation,which usually causes device breakdown.Ionizers are widely used for electrostatic elimination,and utilizing semiconductor silicon for the discharge needle material in ionizers can effectively prevent metal contamination.To investigate the discharge characteristics of silicon needles and their mode modulation mechanism,this study has established an experimental platform for silicon needle-plate discharge under positive polarity voltage.Discharge pulse parameters and optical signals were measured at varying electrode spacings.The experimental results reveal that silicon needle discharge progresses through four regimes:the spontaneous streamer,the periodic streamer,the cluster streamer,and the glow discharge.Among these,the pulse amplitude is most uniform and stable in the periodic streamer regime.In addition,shorter-gap discharge exhibits higher pulse amplitude and repetition frequency but is easier to transition into the filament regime.The formation process of a single pulse is closely related to the field strength in the ionization region near the needle tip.Hence,parameters such as the pulse rising edge time and falling edge time show minimal variation with voltage.The amount of charge generated per unit time is primarily influenced by the repetition frequency.Consequently,the electrostatic ionizer produces the highest,most stable,and most uniform charges if it operates in the periodic streamer regime.
基金The National Natural Science Foundation of China(No.51976039)。
文摘To explore the electrostatic discharge behavior of charged powders in industrial silos,discharge experiments are conducted based on a full-size industrial silo discharge platform.Electrostatic discharge mode,frequency,and energy are investigated for powders of different polarities.Although the powders have low charge-to-mass ratios(+0.087μC/kg for the positively charged powders and−0.26μC/kg for the negatively charged ones),electrostatic discharges occur approximately every 10 s,with the maximum discharge energy being 800 mJ.Powder polarity considerably influences discharge energy.The positive powders exhibit higher discharge energy than the negative ones,although discharge frequency remains similar for both.Effects of powder charge,humidity,and mass flow on discharge frequency and discharge energy are quantitatively analyzed,providing important insights for the improvement of safety in industrial powder handling.
基金Project supported by the National Natural Science Foundation of China (Grant No. 52377135)。
文摘Based on a homemade novel dielectric barrier discharge actuator with a rotating high-voltage electrode, this study investigates the influence of electrode rotating speed on the discharge characteristics, and the mechanisms of discharge process under rotary conditions are discussed. The results demonstrate that when the high-voltage electrode is rotating,the distribution patterns of dielectric barrier discharge and the parameters of micro-discharge channels exhibit significant changes. Under a low rotating speed, the discharge patterns present as a series of separated discharge channels, resulting in uniform charge distribution but uneven electric field distribution in the gap. As the rotating speed increases, the electric field and the discharge channels will be affected by the rotation, so the electric field is more evenly distributed in the gap, and the discharge mode changes to a quasi-uniform discharge. With increasing distance from the rotation axis, the electric field strength gradually decreases, and the electric field force experienced by the micro-discharge channels during its formation weakens. Consequently, the average size of the micro-discharge channels increases, indicating that these channels are gradually stretched. The rotation of the electrode generates a significant number of accumulated charges, impacting the number of micro-discharge channels. The number of micro-discharge channels at the center of the electrode increases with rotating speed;however, due to channel stretching, the average size of the micro-discharge channels at the edge of the electrode also increases, leading to a decrease in their overall quantity. The research results reveal the significant impact of the electrode rotation on the characteristics of discharge channels, providing a theoretical basis for further optimal design of the rotating dielectric barrier discharge in various application.
基金National Key R&D Program of China(No.2020YFC2201000).
文摘Research has been carried out on a hybrid discharge ion thruster,aiming to combine the advantages of Direct Current(DC)discharge ion thrusters(known for their high thrust density and high power supply efficiency)with microwave discharge ion thrusters(which do not require a hollow cathode and are capable of efficient ionization at low pressures).Comparative experiments with different anode structures and single-probe diagnostics revealed that applying a DC bias voltage created a new ionization zone based on microwave discharge.This DC bias increased the sheath potential of the screen grid and led to an elevation in electron temperature and plasma density.It is speculated that the reduced loss of high-energy electrons generated by microwave discharge at the screen grid is the primary reason for the enhanced discharge.By adding a DC bias of approximately 50 V to the microwave discharge,the screen grid current was doubled without a significant increase in discharge power consumption.Under appropriate bias voltages that consider minimizing ion sputtering,DC bias holds promise as a design approach to increase the extracted beam current in microwave ion thrusters.
基金Construction and Practice of a discharge Preparation Plan for First-visit Ischemic stroke patients Based on the ADOPT model(Project No.:XJ2023005101)。
文摘Objective:To investigate the application effect of the discharge preparation plan based on the ADOPT nursing model in patients with first-visit ischemic stroke.Methods:Eighty patients with first-visit ischemic stroke admitted to our hospital from June 1,2024 to November 31,2024 were selected and divided into a control group(June 1,2024 to August 30,2024)and an intervention group(September 1,2024 to November 31,2024)according to different admission times,with 40 cases in each group.The control group received routine care and discharge guidance,while the intervention group received a discharge preparation plan based on the ADOPT model on the basis of routine care.The discharge readiness[Discharge Readiness Scale(RHDS)]of patients on the day of discharge was compared.Self-efficacy at 3 months after discharge[evaluated using the Chronic Disease Self-Efficacy Scale(SECD6)],activities of daily living[evaluated using the Barthel index(BI)],blood glucose and blood pressure indicators(diastolic blood pressure,systolic blood pressure,FPG,2 h PG),and readmission rate within 3 months after discharge were also compared between the two groups.Results:On the day of discharge,the RHDS-related dimension scores of the intervention group were higher than those of the control group(t=17.993,8.560,10.243,p<0.05);Three months after discharge,the SECD6 score and BI score of the intervention group were higher than those of the control group(t=8.910,10.899,both p<0.05);Systolic blood pressure,diastolic blood pressure,FPG and 2h PG in the intervention group were lower than those in the control group(t=8.868,4.794,3.829,7.121,all p<0.05);Within 3 months after discharge,the readmission rate of the intervention group was lower than that of the control group(χ^(2)=5.165,2 p<0.05).Conclusion:The discharge preparation plan based on the ADOPT nursing model,when applied to patients with first-visit ischemic stroke,can not only enhance self-efficacy and discharge preparation,improve activities of daily living,but also optimize blood glucose and blood pressure indicators and reduce the readmission rate,which is worthy of reference.
基金supported by Postgraduate Research&Practice Innovation Program of Jiangsu Province (No. 1003016001)。
文摘Flexible surface micro-discharge plasma is a non-thermal plasma technique used for treating wounds in a painless way, with significant efficacy for chronic or hard-to-heal wounds. In this study, a confined space was designed to simulate wound conditions, with gelatin used to simulate wound tissue. The distinction between open and confined spaces was explored, and the effects of temperature, humidity, discharge power and the gap size within the confined space on the plasma characteristics were analyzed. It was found that temperature, humidity and discharge power are important factors that affect the concentration distribution of active components and the mode transition between ozone and nitrogen oxides. Compared to open space, the concentration of ozone in confined space was relatively lower, which facilitated the formation of nitrogen oxides. In open space, the discharge was dominated by ozone initially. As the temperature,humidity and discharge power increased, nitrogen oxides in the gas-phase products were gradually detected. In confined space, nitrogen oxides can be detected at an early stage and at much higher concentrations than ozone concentration. Furthermore, as the gap of the confined space decreased, the concentration of ozone was observed to decrease while that of nitrate increased, and the rate of this concentration change was further accelerated at higher temperature and higher power. It was shown that ozone concentration decreased from 0.11 to 0.03 μmol and the nitrate concentration increased from 20.5 to 24.5 μmol when the spacing in the confined space was reduced from 5 to 1 mm, the temperature of the external discharge was controlled at 40 ℃, and the discharge power was 12 W. In summary, this study reveals the formation and transformation mechanisms of active substances in air surface micro-discharge plasma within confined space, providing foundational data for its medical applications.
文摘Seawater desalination has been considered an important solution for water scarcity in coastal areas.Morocco,with its 3,500 km long coastline,has seen significant growth in population and industrial activities in recent years.The dams that supply water to most regions of Morocco have faced periods of drought.This led the government to start a large-scale seawater desalination project that shall produce over 2 MM m^(3)/year.The most common environmental impact associated with desalination plants is the high concentration brine discharge which can alter the physical,chemical,and biological properties of the receiving water body,In fact,the increasing number of desalination plants along the coastline amplifies the potential risks that brine discharges pose to marine ecosystems.This highlights the critical need for regulations to manage pollutant concentrations in water,both at the discharge point(Effluent Standards-ES)and in the receiving environment(Ambient Standards-AS).Law 36-15,in its Article 72,grants any natural or legal person,whether public or private,the right to carry out seawater desalination to meet their own water needs or those of other users,in accordance with current legislation and regulations.However,the definition of regulations concerning marine environmental aspects and the substantial limits for discharges has not yet been specified.Indeed,these regulations will need to be developed with due consideration for the local biodiversity.These regulations should also take into account the technical criteria required to determine the compliance point and define the boundaries of the brine discharge impact zone.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51077032).
文摘The precise mathematical method was adopted to simulate the breakdown process of 5 mm rod and plate electrode gap,which was filled with supercritical nitrogen at the condition of 127 K,4 MPa and seed electron density 1×10^(6) m^(-3) under 29 kV DC voltage.The result shows that the discharge process was completed within 11.8 ns from seed electron triggering,avalanche bulking to streamer extending until gap eventually breakdown.The entire gap breakdown process was divided into three discharge stages,namely,the initial discharge triggered(0-4 ns),avalanche(4-7 ns)and streamer phase(7-11.8 ns).At the same time,the facts were also revealed that the discharge evolution,electric field distribution,and electron density had different values,and also showed different temporal and spatial distribution characteristics along the axis of the discharge gap.Specifically,the discharge characteristics of SCN2 under 1,2,3,4,4.5,and 5 MPa at 127 K were theoretically analyzed respectively,and the microscopic mechanisms of the breakdown process were also detailed.The results indicate that the gas discharge law remained applicable within the 1-3 MPa range.However,the discharge characteristics of supercritical nitrogen at 3.4-5 MPa differed significantly from those at lower pressures,likely attributable to the unique state of matter exhibited by supercritical nitrogen.This study contributes to understanding the discharge mechanism of supercritical nitrogen and offers theoretical guidance for its practical application in the power industry.
