Agricultural wastes and sawdust combined with cement matrix in the manufacture of building elements has been practiced with success in developed countries. In this study, sawdust from wood species (Pinus caribaea and ...Agricultural wastes and sawdust combined with cement matrix in the manufacture of building elements has been practiced with success in developed countries. In this study, sawdust from wood species (Pinus caribaea and Eucalyptus grandis) and an agricultural waste—rice husk (Oriza sativa) were combined with Portland cement type V (high initial strength), modified by polymer styrene-butadiene (SBR) addition. Hollow blocks produced with Eucalyptus grandis and rice husk residues showed better compressive strength;however, those produced with residues derived from Pinus caribaea presented non-satisfactory results, due to the particle size that was used.展开更多
Compressed earth blocks (CEB) are an alternative to cement blocks in the construction of wall masonry. However, the optimal architectural construction methods for adequate thermal comfort for occupants in hot and arid...Compressed earth blocks (CEB) are an alternative to cement blocks in the construction of wall masonry. However, the optimal architectural construction methods for adequate thermal comfort for occupants in hot and arid environments are not mastered. This article evaluates the influence of architectural and constructive modes of buildings made of CEB walls and concrete block walls, to optimize and compare their thermal comfort in the hot and dry tropical climate of Ouagadougou, Burkina Faso. Two identical pilot buildings whose envelopes are made of CEB and concrete blocks were monitored for this study. The thermal models of the pilot buildings were implemented in the SketchUp software using an extension of EnergyPlus. The models were empirically validated after calibration against measured thermal data from the buildings. The models were used to do a parametric analysis for optimization of the thermal performances by simulating plaster coatings on the exterior of walls, airtight openings and natural ventilation depending on external weather conditions. The results show that the CEB building displays 7016 hours of discomfort, equivalent to 80.1% of the time, and the concrete building displays 6948 hours of discomfort, equivalent to 79.3% of the time. The optimization by modifications reduced the discomfort to 2918 and 3125 hours respectively;i.e. equivalent to only 33.3% for the CEB building and 35.7% for the concrete building. More study should evaluate thermal optimizations in buildings in real time of usage such as residential buildings commonly used by the local middle class. The use of CEB as a construction material and passive means of improving thermal comfort is a suitable ecological and economical option to replace cementitious material.展开更多
The objective of this work is to improve the physical and mechanical properties of stabilized earth blocks (BTC) used in construction in the Ndé department of Cameroon. To achieve this, two stabilizers, cement an...The objective of this work is to improve the physical and mechanical properties of stabilized earth blocks (BTC) used in construction in the Ndé department of Cameroon. To achieve this, two stabilizers, cement and sawdust, were used at varying percentages of 0%, 4%, 6%, and 8%. Physical characterization tests, including natural water content, specific weight, jar test, Protor, and Atterberg limits, were conducted. Additionally, mechanical tests, such as compression and three-point bending, were performed. The results show that as the amount of stabilizer increases, the density of BTC decreases. The samples with 8% sawdust have the highest density, while those without stabilizers have the lowest. Porosity decreases as sawdust and cement content increases, with smaller values observed in samples with 8% sawdust or cement. Our tests indicate that blocks stabilized with cement have slightly higher compressive strength than those stabilized with sawdust. However, the water absorption rate increases with higher sawdust content.展开更多
文摘Agricultural wastes and sawdust combined with cement matrix in the manufacture of building elements has been practiced with success in developed countries. In this study, sawdust from wood species (Pinus caribaea and Eucalyptus grandis) and an agricultural waste—rice husk (Oriza sativa) were combined with Portland cement type V (high initial strength), modified by polymer styrene-butadiene (SBR) addition. Hollow blocks produced with Eucalyptus grandis and rice husk residues showed better compressive strength;however, those produced with residues derived from Pinus caribaea presented non-satisfactory results, due to the particle size that was used.
文摘Compressed earth blocks (CEB) are an alternative to cement blocks in the construction of wall masonry. However, the optimal architectural construction methods for adequate thermal comfort for occupants in hot and arid environments are not mastered. This article evaluates the influence of architectural and constructive modes of buildings made of CEB walls and concrete block walls, to optimize and compare their thermal comfort in the hot and dry tropical climate of Ouagadougou, Burkina Faso. Two identical pilot buildings whose envelopes are made of CEB and concrete blocks were monitored for this study. The thermal models of the pilot buildings were implemented in the SketchUp software using an extension of EnergyPlus. The models were empirically validated after calibration against measured thermal data from the buildings. The models were used to do a parametric analysis for optimization of the thermal performances by simulating plaster coatings on the exterior of walls, airtight openings and natural ventilation depending on external weather conditions. The results show that the CEB building displays 7016 hours of discomfort, equivalent to 80.1% of the time, and the concrete building displays 6948 hours of discomfort, equivalent to 79.3% of the time. The optimization by modifications reduced the discomfort to 2918 and 3125 hours respectively;i.e. equivalent to only 33.3% for the CEB building and 35.7% for the concrete building. More study should evaluate thermal optimizations in buildings in real time of usage such as residential buildings commonly used by the local middle class. The use of CEB as a construction material and passive means of improving thermal comfort is a suitable ecological and economical option to replace cementitious material.
文摘The objective of this work is to improve the physical and mechanical properties of stabilized earth blocks (BTC) used in construction in the Ndé department of Cameroon. To achieve this, two stabilizers, cement and sawdust, were used at varying percentages of 0%, 4%, 6%, and 8%. Physical characterization tests, including natural water content, specific weight, jar test, Protor, and Atterberg limits, were conducted. Additionally, mechanical tests, such as compression and three-point bending, were performed. The results show that as the amount of stabilizer increases, the density of BTC decreases. The samples with 8% sawdust have the highest density, while those without stabilizers have the lowest. Porosity decreases as sawdust and cement content increases, with smaller values observed in samples with 8% sawdust or cement. Our tests indicate that blocks stabilized with cement have slightly higher compressive strength than those stabilized with sawdust. However, the water absorption rate increases with higher sawdust content.
