Four-factor and three-level orthogonal experimental design(L9(34))was used in the experiment.The effects of three genotypes:Germany SAB three-bred-cross rabbits(S2),New Zealand purebred(N),and crossbred rabbits(ON);th...Four-factor and three-level orthogonal experimental design(L9(34))was used in the experiment.The effects of three genotypes:Germany SAB three-bred-cross rabbits(S2),New Zealand purebred(N),and crossbred rabbits(ON);three levels of Clenbuterol treatment: 1 ng.g-1,2 ng.g-1and 3 ng.g-1,and three feeding methods:5-day,7-day and 10-day withdrawal period after two weeks of feeding Clenbuterol(CL)on bodyweight gain were evaluated.CL apparently improved average daily gain(ADG)of rabbits.70-day ADG of 5-day and 10-day withdrawal were higher than that of 7-day withdrawal,70-day ADG of S2 genotype was significantly higher than that of the control and N genotype was significant.Genotype,additive dose and feeding method had significant effects on overall-stage ADG.ON genotype,2 ng.g-1 dose and 5-day withdrawal feeding method was the best.Responses of different genotype to Clenbuterol appeared different at experimental prophase or whole experimental period.展开更多
In order to adopt Billings Method for fertility regulation during the period of breast feeding, cervical mucus was observed and monitored in 61 breast feeding mothers.Urine estrogen and /or pregnanediol ...In order to adopt Billings Method for fertility regulation during the period of breast feeding, cervical mucus was observed and monitored in 61 breast feeding mothers.Urine estrogen and /or pregnanediol were/was measured in 15 breast feeding mothers. Observations on cervical mucus during 244 months were collected. The type of dry or no mucus was observed in 75.27% fully breast feeding mothers. Constant unchanging mucus was observed in 69.39% partially breast feeding mothers. Developmental changing mucus was observed in 79.25% of mothers bottle feeding their infants. According to the record on cervical mucus within 6 months postpartum, 97.14% of the cervical mucus was consistent with normal menstrual cycles. Urine estrogen and /or pregnanediol were/was measured in 15 breast feeding mothers. The level of estrogen in urine averaged 0.08 μmol/24 h in fully breast feeding mothers and 0.14 μmol/24 h in partially breast feeding mothers.The peak level averaged 0.21 μmol/24 h in bottle feeding mothers.The pregnanediol level was determined to confirm ovulation in bottle feeding mothers. The average levels of cut off and the period of ovulation in 6 bottle feeding mother were 7 μmol/24 h and 9 μmol/24 h respectively.Measurement of urine estrogen and pregnanediol level all matched with cervical mucus appearances. Conclusion: Billings Method is a simple, scientific method for contraception without side effects during breast feeding period.展开更多
An experimental installation of cold model simulation was set up to study the bed pressure drop in different regions of fixed fluidized bed reactor during top feeding and bottom feeding, respectively, at various gas v...An experimental installation of cold model simulation was set up to study the bed pressure drop in different regions of fixed fluidized bed reactor during top feeding and bottom feeding, respectively, at various gas velocities with the fluidization image of solid particles monitored at the same time. By comparing the changes in bed density and operating gas velocity in different regions of fixed fluidized bed reactor, the influence of top feeding and bottom feeding patterns on fluidization behavior could be investigated. The results showed that the bed density in top feeding reactor responded more stably to the change in gas velocity along with the advantage of working in a wider range of operating gas velocities. Based on this study, it is concluded that existing bottom feeding reactor configurations cannot meet the fluidization requirements; and optimization of bottom feeding reactor will be needed.展开更多
Fluorescent silk is fundamentally important for the development of future tissue engineering scaffolds.Despite great progress in the preparation of a variety of colored silks,fluorescent silk with enhanced mechanical ...Fluorescent silk is fundamentally important for the development of future tissue engineering scaffolds.Despite great progress in the preparation of a variety of colored silks,fluorescent silk with enhanced mechanical properties has yet to be explored.In this study,we report on the fabrication of intrinsically super-strong fluorescent silk by feeding Bombyx mori silkworm carbon nanodots(CNDs).The CNDs were incorporated into silk fibroin,hindering the conformation transformation,confining crystallization,and inducing orientation of mesophase.The resultant silk exhibited super-strong mechanical properties with breaking strength of 521.9±82.7 MPa and breaking elongation of 19.2±4.3%,improvements of 55.1%and 53.6%,respectively,in comparison with regular silk.The CNDs-reinforced silk displayed intrinsic blue fluorescence when exposed to 405 nm laser and exhibited no cytotoxic effect on cells,suggesting that multi-functional silks would be potentially useful in bioimaging and other applications.展开更多
Steel strip feeding into the mold during continuous casting is known as an innovative technology.The newly applied technology is designed to further improve the slab quality.To analyze the complex phase change process...Steel strip feeding into the mold during continuous casting is known as an innovative technology.The newly applied technology is designed to further improve the slab quality.To analyze the complex phase change processes,molten sodium thiosulphate(Na2S2O3-5H2O)was used in the experimental investigation as a transparent analog for metallic alloys.Then,a numerical model incorporating fluid flow,heat transfer and phase change during strip feeding into the mold process was developed.The generalized enthalpy-based method was applied to describe the phase change behavior,and the porous media theory was used to model the blockage of fluid flow by the dendrites in the mushy zone between the strip and melt as well as the solidified shell and melt.The validated model was then used for the simulation of the real strip feeding into the mold process in an industrial scale.The whole shape of the strip under the effect of jet flow from the submerged entry nozzle(SEN)was presented.Results show that the strip will reach a pseudo-steady state after experiencing steel sheath formation,steel sheath melting and strip melting processes.When using the feeding method that is the strip narrow side toward the SEN in the present condition,the strip immersion length can reach 4.5 m below the meniscus and the slab centerline temperature can be decreased by 21 K to a maximum.When the strip feeding speed increased from 0.3 to 0.5 m/s,the minimum temperature of the centerline could be lowered by 4 K or so.展开更多
The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculation...The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculations and numerical analysis for the microstrip patch antennas. In this paper, two different designs have been modelled and analyzed and both designs are based on the rectangular patches. The feeding point of one design is inside the patch while the other design contains feeding point outside the patch is T shaped. The computational analysis showed some interesting results for radiation pattern and far field domain. For these designs, the characteristic impedance taken is 50 Ω and the operating frequency domain is 1.4 to 1.7 GHz. The microstrip patch antennas are encapsulated in the inert spherical atmosphere of 20 mm thickness containing air inside it.展开更多
To improve the accuracy of fault location system, several short-circuit tests need to be conducted before being brought into service in autotransformer （AT） feeding systems for high-speed railways in China. However,...To improve the accuracy of fault location system, several short-circuit tests need to be conducted before being brought into service in autotransformer （AT） feeding systems for high-speed railways in China. However, no systematic algorithm yet exists to evaluate the consistency of the current distribution of short-circuit tests. A methodology is proposed in this paper to address this problem. Based on Kirchhoff’s current law and the generalized method of symmetrical components, the current deviations of the AT feeding systems are analysed and then normalized with the short-circuit current as they vary greatly with systems and short-circuit sites. It is also found that the short-circuit current varies with the calculation methods, and its unbiased standard deviation also reflects the consistency of the short-circuit test. The mean and maximum of the current deviations, as well as the unbiased standard deviation of the short-circuit current, show the consistency of the short-circuit test from different aspects,although the last two items are highly relevant. Therefore, a unified evaluation index is defined as the sum of the three items, and then applied in two case studies to test its performance. The results show that, the proposed index canclearly distinguish the consistency of the short-circuit tests and may be used to sort the short-circuit tests for fault location systems. Besides, some short-circuit tests may have very poor consistency indices, and thus are not applicable to the tuning of fault location systems. In the authors’ opinion, the determination of the threshold of the proposed index needs further investigation.展开更多
Based on the evaluation of dynamic performance for feed drives in machine tools, this paper presents a two-stage tuning method of servo parameters. In the first stage, the evaluation of dynamic performance, parameter ...Based on the evaluation of dynamic performance for feed drives in machine tools, this paper presents a two-stage tuning method of servo parameters. In the first stage, the evaluation of dynamic performance, parameter tuning and optimization on a mechatronic integrated system simulation platform of feed drives are performed. As a result, a servo parameter combination is acquired. In the second stage, the servo parameter combination from the first stage is set and tuned further in a real machine tool whose dynamic performance is measured and evaluated using the cross grid encoder developed by Heidenhain GmbH. A case study shows that this method simplifies the test process effectively and results in a good dynamic performance in a real machine tool.展开更多
A definition of combined phase center for horn feeds is given.Formulas of E-planeand H-plane combined phase center for conical horns and the corresponding Optimal model arepresented,and a fast optimization method for ...A definition of combined phase center for horn feeds is given.Formulas of E-planeand H-plane combined phase center for conical horns and the corresponding Optimal model arepresented,and a fast optimization method for solving this model is described.By using thismethod,the phase center of corrugated horn is discussed and calculated,and the variation of thephase center with distance and operating frequency is given.展开更多
Objective:The objective of this study was to construct an early warning system(EWS)to facilitate risk assessment,early identification,and appropriate treatment of enteral nutrition feeding intolerance(FI)in patients w...Objective:The objective of this study was to construct an early warning system(EWS)to facilitate risk assessment,early identification,and appropriate treatment of enteral nutrition feeding intolerance(FI)in patients with stroke,so as to provide a reference for risk classification standards and interventions toward a complete EWSs for nursing care of stroke.Materials and Methods:Based on evidence and clinical nursing practice,a structured expert consultation method was adopted on nine experts over two rounds of consultation.Statistical analysis was used to determine the early warning index for FI in patients with stroke.Results:The expert authority coefficient was 0.89;the coefficients of variation for the two rounds of consultation were 0.088-0.312 and 0.096-0.214,respectively.There were significant differences in the Kendall’s concordance coefficient(P<0.05).Finally,22 items in five dimensions of patient age,disease,treatment,biochemical,and enteral nutrition-related factors were identified.Conclusion:The early warning index for FI in patients with a history of stroke is valid and practical.It provides a reference for the early clinical identification of FI risk.展开更多
The medium -large caliber naval gun is still playing an important role in modern war. The development of highly automatic Shell Raising and Feeding System (SRFS) in the world has been briefly outlined. Several typical...The medium -large caliber naval gun is still playing an important role in modern war. The development of highly automatic Shell Raising and Feeding System (SRFS) in the world has been briefly outlined. Several typical SRFS of medium-large caliber naval guns have been analyzed. A re-design of the system is introduced, in which systematic design method has been used to demonstrate its feasibility. The design goal of the system is to realize rapid shell feeding, with application to many types of shells, quick change of shell types , accurate and reliable feeding operation, simple mechanical structure and easy realization of shell withdrawing.展开更多
The growth interfaces of CdMnTe（CMT） crystals grown by traveling heater method（THM） were studied. Two types of polycrystalline CMT feed ingots synthesized in a traditional rocking furnace and vertical Bridgman（VB...The growth interfaces of CdMnTe（CMT） crystals grown by traveling heater method（THM） were studied. Two types of polycrystalline CMT feed ingots synthesized in a traditional rocking furnace and vertical Bridgman（VB） furnace were adopted in THM growth, and the effects of the polycrystalline feed on the growth interface were revealed. The morphology of the growth interface of CMT crystal（CMT2） grown from the feed by vertical Bridgman was smoother with lower curvature compared with that of CMT crystal（CMT1） from the feed by rocking furnace. The radial Mn composition and Te inclusion distribution of the CMT wafers were analyzed and correlated to the growth interface. The Mn segregation along the radial direction and Te inclusion density of CMT2 were lower than those of CMT1. The VB method synthesized polycrystalline feed could improve the growth interface morphology, which is beneficial for decreasing the Te inclusions and Mn segregation in CMT wafers.展开更多
During radial-axial ring rolling process, cooperative strategy of the radial axial feed is critical for dimensional accuracy and thermo mechanical parameters distribution of the formed ring. In order to improve the co...During radial-axial ring rolling process, cooperative strategy of the radial axial feed is critical for dimensional accuracy and thermo mechanical parameters distribution of the formed ring. In order to improve the comprehensive quality of the ring parts, response surface method （RSM） is employed for the first time to optimize the cooperative feed strategy for radial-axial ring rolling process by combining it with an improved and verified 3D coupled thermo-mechanical finite element model. The feed trajectory is put forward to describe cooperative relationship of the radial- axial feed and three variables are designed based on the feed trajectory. In order to achieve multi- objective optimization, four responses including thermo mechanical parameters distribution and rolling force are proposed. Based on the FEM results, RSM is used to establish a response model to depict the function relationship between the objective response and design variables. Through this approximate model, effects of different variables on ring rolling process are analyzed connect- edly and optimal feed strategy is obtained by resorting to the optimal chart specific to a constraint condition.展开更多
文摘Four-factor and three-level orthogonal experimental design(L9(34))was used in the experiment.The effects of three genotypes:Germany SAB three-bred-cross rabbits(S2),New Zealand purebred(N),and crossbred rabbits(ON);three levels of Clenbuterol treatment: 1 ng.g-1,2 ng.g-1and 3 ng.g-1,and three feeding methods:5-day,7-day and 10-day withdrawal period after two weeks of feeding Clenbuterol(CL)on bodyweight gain were evaluated.CL apparently improved average daily gain(ADG)of rabbits.70-day ADG of 5-day and 10-day withdrawal were higher than that of 7-day withdrawal,70-day ADG of S2 genotype was significantly higher than that of the control and N genotype was significant.Genotype,additive dose and feeding method had significant effects on overall-stage ADG.ON genotype,2 ng.g-1 dose and 5-day withdrawal feeding method was the best.Responses of different genotype to Clenbuterol appeared different at experimental prophase or whole experimental period.
文摘In order to adopt Billings Method for fertility regulation during the period of breast feeding, cervical mucus was observed and monitored in 61 breast feeding mothers.Urine estrogen and /or pregnanediol were/was measured in 15 breast feeding mothers. Observations on cervical mucus during 244 months were collected. The type of dry or no mucus was observed in 75.27% fully breast feeding mothers. Constant unchanging mucus was observed in 69.39% partially breast feeding mothers. Developmental changing mucus was observed in 79.25% of mothers bottle feeding their infants. According to the record on cervical mucus within 6 months postpartum, 97.14% of the cervical mucus was consistent with normal menstrual cycles. Urine estrogen and /or pregnanediol were/was measured in 15 breast feeding mothers. The level of estrogen in urine averaged 0.08 μmol/24 h in fully breast feeding mothers and 0.14 μmol/24 h in partially breast feeding mothers.The peak level averaged 0.21 μmol/24 h in bottle feeding mothers.The pregnanediol level was determined to confirm ovulation in bottle feeding mothers. The average levels of cut off and the period of ovulation in 6 bottle feeding mother were 7 μmol/24 h and 9 μmol/24 h respectively.Measurement of urine estrogen and pregnanediol level all matched with cervical mucus appearances. Conclusion: Billings Method is a simple, scientific method for contraception without side effects during breast feeding period.
文摘An experimental installation of cold model simulation was set up to study the bed pressure drop in different regions of fixed fluidized bed reactor during top feeding and bottom feeding, respectively, at various gas velocities with the fluidization image of solid particles monitored at the same time. By comparing the changes in bed density and operating gas velocity in different regions of fixed fluidized bed reactor, the influence of top feeding and bottom feeding patterns on fluidization behavior could be investigated. The results showed that the bed density in top feeding reactor responded more stably to the change in gas velocity along with the advantage of working in a wider range of operating gas velocities. Based on this study, it is concluded that existing bottom feeding reactor configurations cannot meet the fluidization requirements; and optimization of bottom feeding reactor will be needed.
基金sponsored by the National Key Research and Development Program of China(2016YFA0201700,2016YFA0201702)the Fundamental Research Funds for the Central Universities(2232019A3-06,2232019D3-02)+2 种基金the National Key Research and Development Program of China(2018YFC1105800)the National Natural Science Foundation of China(21674018,51903045)the Shanghai Belt and Road Joint Laboratory of Advanced Fiber and Low-Dimension Materials(18520750400).
文摘Fluorescent silk is fundamentally important for the development of future tissue engineering scaffolds.Despite great progress in the preparation of a variety of colored silks,fluorescent silk with enhanced mechanical properties has yet to be explored.In this study,we report on the fabrication of intrinsically super-strong fluorescent silk by feeding Bombyx mori silkworm carbon nanodots(CNDs).The CNDs were incorporated into silk fibroin,hindering the conformation transformation,confining crystallization,and inducing orientation of mesophase.The resultant silk exhibited super-strong mechanical properties with breaking strength of 521.9±82.7 MPa and breaking elongation of 19.2±4.3%,improvements of 55.1%and 53.6%,respectively,in comparison with regular silk.The CNDs-reinforced silk displayed intrinsic blue fluorescence when exposed to 405 nm laser and exhibited no cytotoxic effect on cells,suggesting that multi-functional silks would be potentially useful in bioimaging and other applications.
基金This work was funded by the National Natural Science Foundation of China(Nos.51574068 and 51974071)Yong Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2018QNRC001).
文摘Steel strip feeding into the mold during continuous casting is known as an innovative technology.The newly applied technology is designed to further improve the slab quality.To analyze the complex phase change processes,molten sodium thiosulphate(Na2S2O3-5H2O)was used in the experimental investigation as a transparent analog for metallic alloys.Then,a numerical model incorporating fluid flow,heat transfer and phase change during strip feeding into the mold process was developed.The generalized enthalpy-based method was applied to describe the phase change behavior,and the porous media theory was used to model the blockage of fluid flow by the dendrites in the mushy zone between the strip and melt as well as the solidified shell and melt.The validated model was then used for the simulation of the real strip feeding into the mold process in an industrial scale.The whole shape of the strip under the effect of jet flow from the submerged entry nozzle(SEN)was presented.Results show that the strip will reach a pseudo-steady state after experiencing steel sheath formation,steel sheath melting and strip melting processes.When using the feeding method that is the strip narrow side toward the SEN in the present condition,the strip immersion length can reach 4.5 m below the meniscus and the slab centerline temperature can be decreased by 21 K to a maximum.When the strip feeding speed increased from 0.3 to 0.5 m/s,the minimum temperature of the centerline could be lowered by 4 K or so.
文摘The finite element modeling of three dimensional structures is important for researchers especially in the field of antennas and other domains of electromagnetic waves. This paper presents a finite element calculations and numerical analysis for the microstrip patch antennas. In this paper, two different designs have been modelled and analyzed and both designs are based on the rectangular patches. The feeding point of one design is inside the patch while the other design contains feeding point outside the patch is T shaped. The computational analysis showed some interesting results for radiation pattern and far field domain. For these designs, the characteristic impedance taken is 50 Ω and the operating frequency domain is 1.4 to 1.7 GHz. The microstrip patch antennas are encapsulated in the inert spherical atmosphere of 20 mm thickness containing air inside it.
文摘To improve the accuracy of fault location system, several short-circuit tests need to be conducted before being brought into service in autotransformer （AT） feeding systems for high-speed railways in China. However, no systematic algorithm yet exists to evaluate the consistency of the current distribution of short-circuit tests. A methodology is proposed in this paper to address this problem. Based on Kirchhoff’s current law and the generalized method of symmetrical components, the current deviations of the AT feeding systems are analysed and then normalized with the short-circuit current as they vary greatly with systems and short-circuit sites. It is also found that the short-circuit current varies with the calculation methods, and its unbiased standard deviation also reflects the consistency of the short-circuit test. The mean and maximum of the current deviations, as well as the unbiased standard deviation of the short-circuit current, show the consistency of the short-circuit test from different aspects,although the last two items are highly relevant. Therefore, a unified evaluation index is defined as the sum of the three items, and then applied in two case studies to test its performance. The results show that, the proposed index canclearly distinguish the consistency of the short-circuit tests and may be used to sort the short-circuit tests for fault location systems. Besides, some short-circuit tests may have very poor consistency indices, and thus are not applicable to the tuning of fault location systems. In the authors’ opinion, the determination of the threshold of the proposed index needs further investigation.
基金This paper is supported by the Major State Basic Research Development Program of China under Grant No2005CB724101the Key Items Program of International Science and Technology Cooperation of China under Grant No2003DF000021
文摘Based on the evaluation of dynamic performance for feed drives in machine tools, this paper presents a two-stage tuning method of servo parameters. In the first stage, the evaluation of dynamic performance, parameter tuning and optimization on a mechatronic integrated system simulation platform of feed drives are performed. As a result, a servo parameter combination is acquired. In the second stage, the servo parameter combination from the first stage is set and tuned further in a real machine tool whose dynamic performance is measured and evaluated using the cross grid encoder developed by Heidenhain GmbH. A case study shows that this method simplifies the test process effectively and results in a good dynamic performance in a real machine tool.
文摘A definition of combined phase center for horn feeds is given.Formulas of E-planeand H-plane combined phase center for conical horns and the corresponding Optimal model arepresented,and a fast optimization method for solving this model is described.By using thismethod,the phase center of corrugated horn is discussed and calculated,and the variation of thephase center with distance and operating frequency is given.
基金supported by the Young Teacher Project of the Beijing University of Chinese Medicine(No.:2018-JYB-JS155).
文摘Objective:The objective of this study was to construct an early warning system(EWS)to facilitate risk assessment,early identification,and appropriate treatment of enteral nutrition feeding intolerance(FI)in patients with stroke,so as to provide a reference for risk classification standards and interventions toward a complete EWSs for nursing care of stroke.Materials and Methods:Based on evidence and clinical nursing practice,a structured expert consultation method was adopted on nine experts over two rounds of consultation.Statistical analysis was used to determine the early warning index for FI in patients with stroke.Results:The expert authority coefficient was 0.89;the coefficients of variation for the two rounds of consultation were 0.088-0.312 and 0.096-0.214,respectively.There were significant differences in the Kendall’s concordance coefficient(P<0.05).Finally,22 items in five dimensions of patient age,disease,treatment,biochemical,and enteral nutrition-related factors were identified.Conclusion:The early warning index for FI in patients with a history of stroke is valid and practical.It provides a reference for the early clinical identification of FI risk.
文摘The medium -large caliber naval gun is still playing an important role in modern war. The development of highly automatic Shell Raising and Feeding System (SRFS) in the world has been briefly outlined. Several typical SRFS of medium-large caliber naval guns have been analyzed. A re-design of the system is introduced, in which systematic design method has been used to demonstrate its feasibility. The design goal of the system is to realize rapid shell feeding, with application to many types of shells, quick change of shell types , accurate and reliable feeding operation, simple mechanical structure and easy realization of shell withdrawing.
基金Projects(11375112,51472155,11275122)supported by the National Natural Science Foundation of China
文摘The growth interfaces of CdMnTe（CMT） crystals grown by traveling heater method（THM） were studied. Two types of polycrystalline CMT feed ingots synthesized in a traditional rocking furnace and vertical Bridgman（VB） furnace were adopted in THM growth, and the effects of the polycrystalline feed on the growth interface were revealed. The morphology of the growth interface of CMT crystal（CMT2） grown from the feed by vertical Bridgman was smoother with lower curvature compared with that of CMT crystal（CMT1） from the feed by rocking furnace. The radial Mn composition and Te inclusion distribution of the CMT wafers were analyzed and correlated to the growth interface. The Mn segregation along the radial direction and Te inclusion density of CMT2 were lower than those of CMT1. The VB method synthesized polycrystalline feed could improve the growth interface morphology, which is beneficial for decreasing the Te inclusions and Mn segregation in CMT wafers.
基金Specialized Research Fund for the Doctoral Program of Higher Education(No.20126102120022) of ChinaNorthwestern Polytechnical University(NPU) Foundation for Fundamental Research(NPU-FFR-JC200822) of China for the support given to the research
文摘During radial-axial ring rolling process, cooperative strategy of the radial axial feed is critical for dimensional accuracy and thermo mechanical parameters distribution of the formed ring. In order to improve the comprehensive quality of the ring parts, response surface method （RSM） is employed for the first time to optimize the cooperative feed strategy for radial-axial ring rolling process by combining it with an improved and verified 3D coupled thermo-mechanical finite element model. The feed trajectory is put forward to describe cooperative relationship of the radial- axial feed and three variables are designed based on the feed trajectory. In order to achieve multi- objective optimization, four responses including thermo mechanical parameters distribution and rolling force are proposed. Based on the FEM results, RSM is used to establish a response model to depict the function relationship between the objective response and design variables. Through this approximate model, effects of different variables on ring rolling process are analyzed connect- edly and optimal feed strategy is obtained by resorting to the optimal chart specific to a constraint condition.
