Traditional nanofiltration membranes face challenges such as membrane fouling and difficulties in achieving precise separation of small organic molecules.A promising solution to these issues is the preparation of thin...Traditional nanofiltration membranes face challenges such as membrane fouling and difficulties in achieving precise separation of small organic molecules.A promising solution to these issues is the preparation of thin-film nanocomposite membranes.In this study,Cu and Ag bimetals were incorporated into covalent organic frameworks to fabricate thin-film nanocomposite membranes.The hydrophilic monomer 1,3,5-tris(4-aminophenyl)benzene of covalent organic frameworks was introduced as a water phase monomer during interfacial polymerization to enhance the organic-inorganic compatibility.The incorporated covalent organic frameworks within the thin-film nanocomposite membrane loosened the selective layer,resulting in an enhanced permeability of 24.6 LMH bar^(-1).The membrane exhibited a rejection rate over 99.0%for Congo Red,Xylene Brilliant Cyanine G,and Reactive Blue,while exhibiting relatively low rejection rates of MgCl_(2) and NaCl.Moreover,the outstanding catalytic capability of the incorporated bimetals led to a 4-nitrophenol conversion rate of 84.38%,enabling simultaneous conversion and separation.The integration of covalent organic frameworks and bimetals also imparted robust antibacterial properties,significantly enhancing operational stability.In conclusion,the covalent organic framework-Cu/Ag-based thin-film nanocomposite membrane demonstrated superior catalytic and separation capabilities,presenting a promising alternative for advanced filtration applications.展开更多
In the present study,a film consisting of TiO_2 doped with copper was prepared for efficiently decomposing 4-nitrophenol(4-NP) by photocatalysis.The preparing process of TiO_2 doped with copper includes two procedures...In the present study,a film consisting of TiO_2 doped with copper was prepared for efficiently decomposing 4-nitrophenol(4-NP) by photocatalysis.The preparing process of TiO_2 doped with copper includes two procedures:preparing Ti(OH)_4 doped with copper and synthesizing anatase and rutile TiO_2 doped with copper.Ti(OH)_4 doped with copper could be achieved by hydrolyzing TiCl_4in the mixed solution containing deionized water and copper oxalate.The Ti(OH)_4 doped with copper can be gained successfully by the following procedures:rinsing,drying and vacuum drying.The Ti(OH)_4 doped with copper could be converted into anatase TiO_2 doped with copper and rutile TiO_2 doped with copper by incineration for 4.5 h at 723 and 1 073 K,respectively.Characterizations of anatase TiO_2 doped with copper and rutile TiO_2 doped with copper were determined by X-ray diffraction(XRD) and energy dispersion of X-ray(EDX).Anatase and rutile TiO_2 doped with copper were dissolved in a mixed solution containing isopropanol and diethylamine.Stainless electrode was submerged into with the solutions,the film of TiO_2 was formed by drying the thin layer at a ramp rate of 3℃/min until 373 K,and this temperature was held for 1 h.The temperature of the oven was subsequently increased to a final temperature of 823 K at a ramp rate of 3℃/min,and was held at this value for 1 h.The stainless steel covered with modified TiO_2 film was utilized as the anode.The stainless steel mesh was used as the cathode.The cathode and anode were connected with the source and immersed into the solution with 100 mg/L 4-NP.The whole reaction on photocatalysis was perfectly carried out after ultraviolet radiation and aerator were run.The experimental results showed that:cracking ratio of 4-NP ring,the removal ratio of chemical oxygen demand(COD) and total organic carbon(TOC) were respectively more than 90%,80% and 80% within 2 h.Degradation of 4-NP implied its potential application in associated wastewater.展开更多
基金sponsored by the National Natural Science Foundation of China(Grant No.NSFC-22378160 and U23A20688).
文摘Traditional nanofiltration membranes face challenges such as membrane fouling and difficulties in achieving precise separation of small organic molecules.A promising solution to these issues is the preparation of thin-film nanocomposite membranes.In this study,Cu and Ag bimetals were incorporated into covalent organic frameworks to fabricate thin-film nanocomposite membranes.The hydrophilic monomer 1,3,5-tris(4-aminophenyl)benzene of covalent organic frameworks was introduced as a water phase monomer during interfacial polymerization to enhance the organic-inorganic compatibility.The incorporated covalent organic frameworks within the thin-film nanocomposite membrane loosened the selective layer,resulting in an enhanced permeability of 24.6 LMH bar^(-1).The membrane exhibited a rejection rate over 99.0%for Congo Red,Xylene Brilliant Cyanine G,and Reactive Blue,while exhibiting relatively low rejection rates of MgCl_(2) and NaCl.Moreover,the outstanding catalytic capability of the incorporated bimetals led to a 4-nitrophenol conversion rate of 84.38%,enabling simultaneous conversion and separation.The integration of covalent organic frameworks and bimetals also imparted robust antibacterial properties,significantly enhancing operational stability.In conclusion,the covalent organic framework-Cu/Ag-based thin-film nanocomposite membrane demonstrated superior catalytic and separation capabilities,presenting a promising alternative for advanced filtration applications.
基金Environmental Protection Department of Jiangsu Province,China(No.2013023)Jiangsu Key Laboratory of Industrial Water-Conservation & Emission Reduction,China(No.IWCER201202)
文摘In the present study,a film consisting of TiO_2 doped with copper was prepared for efficiently decomposing 4-nitrophenol(4-NP) by photocatalysis.The preparing process of TiO_2 doped with copper includes two procedures:preparing Ti(OH)_4 doped with copper and synthesizing anatase and rutile TiO_2 doped with copper.Ti(OH)_4 doped with copper could be achieved by hydrolyzing TiCl_4in the mixed solution containing deionized water and copper oxalate.The Ti(OH)_4 doped with copper can be gained successfully by the following procedures:rinsing,drying and vacuum drying.The Ti(OH)_4 doped with copper could be converted into anatase TiO_2 doped with copper and rutile TiO_2 doped with copper by incineration for 4.5 h at 723 and 1 073 K,respectively.Characterizations of anatase TiO_2 doped with copper and rutile TiO_2 doped with copper were determined by X-ray diffraction(XRD) and energy dispersion of X-ray(EDX).Anatase and rutile TiO_2 doped with copper were dissolved in a mixed solution containing isopropanol and diethylamine.Stainless electrode was submerged into with the solutions,the film of TiO_2 was formed by drying the thin layer at a ramp rate of 3℃/min until 373 K,and this temperature was held for 1 h.The temperature of the oven was subsequently increased to a final temperature of 823 K at a ramp rate of 3℃/min,and was held at this value for 1 h.The stainless steel covered with modified TiO_2 film was utilized as the anode.The stainless steel mesh was used as the cathode.The cathode and anode were connected with the source and immersed into the solution with 100 mg/L 4-NP.The whole reaction on photocatalysis was perfectly carried out after ultraviolet radiation and aerator were run.The experimental results showed that:cracking ratio of 4-NP ring,the removal ratio of chemical oxygen demand(COD) and total organic carbon(TOC) were respectively more than 90%,80% and 80% within 2 h.Degradation of 4-NP implied its potential application in associated wastewater.
