The aim of this work was to study the influence of oxide ions concentration on the stability of 316L stainless steel and its alloying compounds (chromium, iron, nickel and molybdenum) in molten LiCl-KCl-Li2O at 550˚C....The aim of this work was to study the influence of oxide ions concentration on the stability of 316L stainless steel and its alloying compounds (chromium, iron, nickel and molybdenum) in molten LiCl-KCl-Li2O at 550˚C. An in-situ oxide ions titration method using square wave voltammetry was developed to quantify oxide ions, to accurately control the experimental conditions. The influence of oxide ions concentration was then studied by linear sweep voltammetry and long-term immersions followed by SEM-EDS analysis on pure elements and SS316L. Results showed that chromium was stabilized in presence of O2−, iron was dissolved independently of [O2−], nickel was resistant to corrosion and molybdenum, which was stable in oxide-free media, was found reactive towards O2−. On SS316L, a passivation layer was observed and an enriched chromium-oxygen layer was observed by SEM-EDS. Almost all the iron was dissolved and a small depletion of molybdenum was visible while nickel remained resistant to corrosion. Linear sweep voltammetry studies were consistent with SEM-EDS analysis and each alloying compound exhibited a similar behaviour in the SS316L as its pure form.展开更多
Samples of FJ316 stainless steel powder alloyed with different amounts of glass2 material have been compacted at the pressure of 686MPa and sintered at 1160, 1180,and 1200℃, in hydrogen atmosphere for one hour. The ...Samples of FJ316 stainless steel powder alloyed with different amounts of glass2 material have been compacted at the pressure of 686MPa and sintered at 1160, 1180,and 1200℃, in hydrogen atmosphere for one hour. The materials have been subjected to microstructure characterization, tensile strength, handness, impact toughness and corrosion testing. The effect of the experimental process parameter has been evaluated and the importance of porosity, sintered temperature, glass content and its grain size in determining mechanical and corrosion properties has been confirmed. Glass has a strong effect on the mechanical properties and produces brittleness when added to FJ316SS. Very good corrosion resistance has been achieved by comparing this result with the corosion resistance of sintered pure stainless steel. The results of this study permit optimization in the production of glass alloyed P/M FJ316SS, with respect to mechanical properties and high corrosion resistance.展开更多
Stainless steels have received wide attention as a substitute material for bipolar plates in high temperature proton exchange membrane fuel cell(HT-PEMFC).In the present work,the CrN,CrAlN and multilayer CrN/CrAlN coa...Stainless steels have received wide attention as a substitute material for bipolar plates in high temperature proton exchange membrane fuel cell(HT-PEMFC).In the present work,the CrN,CrAlN and multilayer CrN/CrAlN coatings were deposited on 316 L SS to increase the corrosion resistance and decrease the interfacial contact resistance.The deposited coatings exhibited face centered cubic phase structure and it was verified from the X-ray diffraction pattern.X-ray photo electron spectroscopy results showed the formation of both CrN and CrAlN layers on 316 L SS.CrN/CrAlN coating is more helpful in water management due to low surface roughness and high contact angle in the HT-PEMFC environment.The corrosion resistance behavior of all the samples were studied in 85%H_(3)PO_(4)solution at 140℃purged with H_(2)(HT-PEMFC anode)and O_(2)(HT-PEMFC cathode)gases.The results showed that all the coatings considerably improved the performance of 316 L SS and superior corrosion resistance was observed for CrN/CrAlN multilayer coating,whose protective efficiency was 98.12%and 96.14%in the two simulated HT-PEMFC environments.The results of electrochemical impedance spectroscopic studies demonstrated higher impedance for CrN/CrAlN coating.Surface morphological studies performed after corrosion studies revealed that protection ability of CrN/CrAlN coating still remained acceptable.A very low interfacial contact resistance value of 6 mΩ cm^(2) at 140 N/cm;was observed for CrN/CrAlN coating.Moreover,after corrosion studies,the interfacial contact resistance value of CrN/CrAlN coated 316 L was much lower than that of CrN and CrAlN coatings due to the increased oxidation resistance.The maximum power density of about 0.93 W/cm^(2) at 2 A/cm^(2) and output voltage of 0.96 V was observed for CrN/CrAlN coating.展开更多
The Cu2O/TiO2 p-n heterojunction composite photoelectrodes were prepared by depositing Cu 2 O nanoparticles on the surface of TiO 2 nanotubes via anodic oxidation and constant current deposition.Field emission scannin...The Cu2O/TiO2 p-n heterojunction composite photoelectrodes were prepared by depositing Cu 2 O nanoparticles on the surface of TiO 2 nanotubes via anodic oxidation and constant current deposition.Field emission scanning electron microscopy(SEM)and high-resolution transmission electron microscopy(HRTEM)analyses showed that Cu 2 O nanoparticles not only deposited on the surface of TiO 2 nanotube array,but also on the wall of TiO 2 nanotubes.The Cu 2 O deposition amount could be adjusted by changing the deposition time.The photoelectrochemical cathodic protection(PECCP)performance of the prepared photoelectrodes for 316L stainless steel(SS)was tested under visible light.The constant current deposition time had a signifi cant eff ect on the PECCP performance of Cu 2 O/TiO 2-X photoelectrodes and Cu 2 O/TiO 2-20 had the best PECCP performance for the coupled 316L SS.This was attributed to the appropriate amount and thickness of Cu 2 O to form p-n heterojunctions with TiO 2,in which separation of the photogenerated carriers was accelerated and transfer of the photogenerated electrons to 316L SS for PECCP was facilitated.展开更多
文摘The aim of this work was to study the influence of oxide ions concentration on the stability of 316L stainless steel and its alloying compounds (chromium, iron, nickel and molybdenum) in molten LiCl-KCl-Li2O at 550˚C. An in-situ oxide ions titration method using square wave voltammetry was developed to quantify oxide ions, to accurately control the experimental conditions. The influence of oxide ions concentration was then studied by linear sweep voltammetry and long-term immersions followed by SEM-EDS analysis on pure elements and SS316L. Results showed that chromium was stabilized in presence of O2−, iron was dissolved independently of [O2−], nickel was resistant to corrosion and molybdenum, which was stable in oxide-free media, was found reactive towards O2−. On SS316L, a passivation layer was observed and an enriched chromium-oxygen layer was observed by SEM-EDS. Almost all the iron was dissolved and a small depletion of molybdenum was visible while nickel remained resistant to corrosion. Linear sweep voltammetry studies were consistent with SEM-EDS analysis and each alloying compound exhibited a similar behaviour in the SS316L as its pure form.
文摘Samples of FJ316 stainless steel powder alloyed with different amounts of glass2 material have been compacted at the pressure of 686MPa and sintered at 1160, 1180,and 1200℃, in hydrogen atmosphere for one hour. The materials have been subjected to microstructure characterization, tensile strength, handness, impact toughness and corrosion testing. The effect of the experimental process parameter has been evaluated and the importance of porosity, sintered temperature, glass content and its grain size in determining mechanical and corrosion properties has been confirmed. Glass has a strong effect on the mechanical properties and produces brittleness when added to FJ316SS. Very good corrosion resistance has been achieved by comparing this result with the corosion resistance of sintered pure stainless steel. The results of this study permit optimization in the production of glass alloyed P/M FJ316SS, with respect to mechanical properties and high corrosion resistance.
基金the financial assistance received from Science and Engineering Research Board(SERB PDF/2017/002594),New Delhi,India。
文摘Stainless steels have received wide attention as a substitute material for bipolar plates in high temperature proton exchange membrane fuel cell(HT-PEMFC).In the present work,the CrN,CrAlN and multilayer CrN/CrAlN coatings were deposited on 316 L SS to increase the corrosion resistance and decrease the interfacial contact resistance.The deposited coatings exhibited face centered cubic phase structure and it was verified from the X-ray diffraction pattern.X-ray photo electron spectroscopy results showed the formation of both CrN and CrAlN layers on 316 L SS.CrN/CrAlN coating is more helpful in water management due to low surface roughness and high contact angle in the HT-PEMFC environment.The corrosion resistance behavior of all the samples were studied in 85%H_(3)PO_(4)solution at 140℃purged with H_(2)(HT-PEMFC anode)and O_(2)(HT-PEMFC cathode)gases.The results showed that all the coatings considerably improved the performance of 316 L SS and superior corrosion resistance was observed for CrN/CrAlN multilayer coating,whose protective efficiency was 98.12%and 96.14%in the two simulated HT-PEMFC environments.The results of electrochemical impedance spectroscopic studies demonstrated higher impedance for CrN/CrAlN coating.Surface morphological studies performed after corrosion studies revealed that protection ability of CrN/CrAlN coating still remained acceptable.A very low interfacial contact resistance value of 6 mΩ cm^(2) at 140 N/cm;was observed for CrN/CrAlN coating.Moreover,after corrosion studies,the interfacial contact resistance value of CrN/CrAlN coated 316 L was much lower than that of CrN and CrAlN coatings due to the increased oxidation resistance.The maximum power density of about 0.93 W/cm^(2) at 2 A/cm^(2) and output voltage of 0.96 V was observed for CrN/CrAlN coating.
基金Supported by the National Natural Science Foundation of China(Nos.41576114,41676069)the State Key Laboratory for Marine Corrosion and Protection,Luoyang Ship Material Research Institute,China(No.614290101011703)the Qingdao Innovative Leading Talent Foundation(No.15-10-3-15-(39)-zch)。
文摘The Cu2O/TiO2 p-n heterojunction composite photoelectrodes were prepared by depositing Cu 2 O nanoparticles on the surface of TiO 2 nanotubes via anodic oxidation and constant current deposition.Field emission scanning electron microscopy(SEM)and high-resolution transmission electron microscopy(HRTEM)analyses showed that Cu 2 O nanoparticles not only deposited on the surface of TiO 2 nanotube array,but also on the wall of TiO 2 nanotubes.The Cu 2 O deposition amount could be adjusted by changing the deposition time.The photoelectrochemical cathodic protection(PECCP)performance of the prepared photoelectrodes for 316L stainless steel(SS)was tested under visible light.The constant current deposition time had a signifi cant eff ect on the PECCP performance of Cu 2 O/TiO 2-X photoelectrodes and Cu 2 O/TiO 2-20 had the best PECCP performance for the coupled 316L SS.This was attributed to the appropriate amount and thickness of Cu 2 O to form p-n heterojunctions with TiO 2,in which separation of the photogenerated carriers was accelerated and transfer of the photogenerated electrons to 316L SS for PECCP was facilitated.
