A group G is said to be(2,3,t) -generated if it can be generated by an involution x and an element y so that 0(y)=3?and 0(xy)=t. In the present article, we determine all (2,3,t)-generations for the Rudvalis sporadic s...A group G is said to be(2,3,t) -generated if it can be generated by an involution x and an element y so that 0(y)=3?and 0(xy)=t. In the present article, we determine all (2,3,t)-generations for the Rudvalis sporadic simple group Ru, where t is any divisor of .展开更多
The practical application of the lithium anode in lithium metal batteries(LMBs) has been hindered by the uncontrollable growth of lithium dendrite and the high volumetric change during cycling. Herein, the in situ for...The practical application of the lithium anode in lithium metal batteries(LMBs) has been hindered by the uncontrollable growth of lithium dendrite and the high volumetric change during cycling. Herein, the in situ formed three-dimensional(3D) lithium-boron(Li-B) alloy is suggested as an excellent alternative to the Li metal, in which the 3D Li B skeleton can mitigate the growth of Li dendrites and volumetric change. In this study, the Li-B alloy anodes with different B contents were manufactured by high-temperature melting. It was found that the boron content had a significant effect on the electrochemical performance of the Li-B alloy. The Li-B alloy with the least B content(10 wt%, 10LiB) demonstrated the lowest overpotential of 0.0852 V after 300 h and the lowest interface resistance. However, the full cell with 15LiB as the anode displayed the best cycling performance of 115 m Ah·g^(-1) after 100 cycles with a columbic efficiency greater than 97%. The obtained results suggest that the in situ formed three-dimensional Li-B alloy anode can be an excellent alternative to the Li anode via tuning B contents for next-generation high energy density LMBs.展开更多
The increasing energy requirements to power the modern world has driven active research into more advanced electrochemical energy storage devices(EESD)with both high energy densities and power densities.Wide range of ...The increasing energy requirements to power the modern world has driven active research into more advanced electrochemical energy storage devices(EESD)with both high energy densities and power densities.Wide range of newly discovered materials with promising electrochemical properties has shown great potential for next-generation devices,but their performance is normally associated with contradicting demands of thin electrodes and high mass loading that can be hardly achieved for practical applications.Design of three-dimensional(3D)porous electrodes can increase the mass loading while maintaining the effective charge transport even with thick electrodes,which has proven to be efficient to overcome the limitations.3D structures have also been demonstrated excellent structural stability to withstand strong strains and stresses generated during charge/discharge cycle.3D printing,which can fabricate various delicate and complex structural designs,thus offering brand-new opportunities for the rational design and facile construction of next-generation EESDs.The recent developments in 3D printing of next-generation EESDs with high performance are reviewed.Advanced/multiscale electrode structures,such as hierarchically porous structure that can be constructed via high-resolution 3D printing or with post-treatment,are further emphasized.The ability of current 3D printing techniques to fulfill multimaterial printing to fulfill simple packaging will be covered.展开更多
Piezoelectricity in native bones has been well recognized as the key factor in bone regeneration.Thus,bio-piezoelectric materials have gained substantial attention in repairing damaged bone by mimicking the tissue’s ...Piezoelectricity in native bones has been well recognized as the key factor in bone regeneration.Thus,bio-piezoelectric materials have gained substantial attention in repairing damaged bone by mimicking the tissue’s electrical microenvironment(EM).However,traditional manufacturing strategies still encounter limitations in creating personalized bio-piezoelectric scaffolds,hindering their clinical applications.Three-dimensional(3D)/four-dimensional(4D)printing technology based on the principle of layer-by-layer forming and stacking of discrete materials has demonstrated outstanding advantages in fabricating bio-piezoelectric scaffolds in a more complex-shaped structure.Notably,4D printing functionality-shifting bio-piezoelectric scaffolds can provide a time-dependent programmable tissue EM in response to external stimuli for bone regeneration.In this review,we first summarize the physicochemical properties of commonly used bio-piezoelectric materials(including polymers,ceramics,and their composites)and representative biological findings for bone regeneration.Then,we discuss the latest research advances in the 3D printing of bio-piezoelectric scaffolds in terms of feedstock selection,printing process,induction strategies,and potential applications.Besides,some related challenges such as feedstock scalability,printing resolution,stress-to-polarization conversion efficiency,and non-invasive induction ability after implantation have been put forward.Finally,we highlight the potential of shape/property/functionality-shifting smart 4D bio-piezoelectric scaffolds in bone tissue engineering(BTE).Taken together,this review emphasizes the appealing utility of 3D/4D printed biological piezoelectric scaffolds as next-generation BTE implants.展开更多
The rare-earth ions(Yb^(3+),Tm^(3+))and Li^(+),Bi^(3+)ions doped GdCa_(4)O(BO_(3))_(3) crystals were grown using the Czochralski pulling method.The second-harmonic-generation conversion efficiencies of the GdCOB:Yb an...The rare-earth ions(Yb^(3+),Tm^(3+))and Li^(+),Bi^(3+)ions doped GdCa_(4)O(BO_(3))_(3) crystals were grown using the Czochralski pulling method.The second-harmonic-generation conversion efficiencies of the GdCOB:Yb and GdCOB:Tm crystals are 31.3%and 33.3%,respectively,while the undoped GdCOB crystal is 27.9%.The conversion efficiencies of Yb^(3+),Tm^(3+)doped GdCOB are improved by 12%and 19%,respectively,compared to that of the undoped one.The conversion efficiencies of Li^(+),Bi^(3+)doped GdCOB crystals are 33%and 38.3%,which are improved by 15%and 37%as compared to that of the undoped crystal.The results are discussed using the anion group theory.展开更多
The popularity of deep learning has boosted computer-generated holography(CGH)as a vibrant research field,particularly physics-driven unsupervised learning.Nevertheless,present unsupervised CGH models have not yet exp...The popularity of deep learning has boosted computer-generated holography(CGH)as a vibrant research field,particularly physics-driven unsupervised learning.Nevertheless,present unsupervised CGH models have not yet explored the potential of generating full-color 3D holograms through a unified framework.In this study,we propose a lightweight multiwavelength network model capable of high-fidelity and efficient full-color hologram generation in both 2D and 3D display,called IncepHoloRGB.The high-speed simultaneous generation of RGB holograms at 191 frames per second(FPS)is based on Inception sampling blocks and multi-wavelength propagation module integrated with depth-traced superimposition,achieving an average structural similarity(SSIM)of 0.88 and peak signal-to-noise ratio(PSNR)of 29.00 on the DIV2K test set in reconstruction.Full-color reconstruction of numerical simulations and optical experiments shows that IncepHoloRGB is versatile to diverse scenarios and can obtain authentic full-color holographic 3D display within a unified network model,paving the way for applications towards real-time dynamic naked-eye 3D display,virtual and augmented reality(VR/AR)systems.展开更多
文摘A group G is said to be(2,3,t) -generated if it can be generated by an involution x and an element y so that 0(y)=3?and 0(xy)=t. In the present article, we determine all (2,3,t)-generations for the Rudvalis sporadic simple group Ru, where t is any divisor of .
基金financially supported by the National Natural Science Foundation of China (Nos. U1904216 and51771236)the Science Fund for Distinguished Young Scholars of Hunan Province (No. 2018JJ1038)+1 种基金the Innovation-Driven Project of Central South University (No. 2020CX007)the State Key Laboratory of Powder Metallurgy, Central South University。
文摘The practical application of the lithium anode in lithium metal batteries(LMBs) has been hindered by the uncontrollable growth of lithium dendrite and the high volumetric change during cycling. Herein, the in situ formed three-dimensional(3D) lithium-boron(Li-B) alloy is suggested as an excellent alternative to the Li metal, in which the 3D Li B skeleton can mitigate the growth of Li dendrites and volumetric change. In this study, the Li-B alloy anodes with different B contents were manufactured by high-temperature melting. It was found that the boron content had a significant effect on the electrochemical performance of the Li-B alloy. The Li-B alloy with the least B content(10 wt%, 10LiB) demonstrated the lowest overpotential of 0.0852 V after 300 h and the lowest interface resistance. However, the full cell with 15LiB as the anode displayed the best cycling performance of 115 m Ah·g^(-1) after 100 cycles with a columbic efficiency greater than 97%. The obtained results suggest that the in situ formed three-dimensional Li-B alloy anode can be an excellent alternative to the Li anode via tuning B contents for next-generation high energy density LMBs.
基金supports by National Natural Science Foundation of China(grant no.51902265)Fundamental Research Funds for the Central Universities,Key Research and Development Program of Shaanxi(no.2020KWZ-001)Project for graduate Innovation team of Northwestern Polytechnical University.
文摘The increasing energy requirements to power the modern world has driven active research into more advanced electrochemical energy storage devices(EESD)with both high energy densities and power densities.Wide range of newly discovered materials with promising electrochemical properties has shown great potential for next-generation devices,but their performance is normally associated with contradicting demands of thin electrodes and high mass loading that can be hardly achieved for practical applications.Design of three-dimensional(3D)porous electrodes can increase the mass loading while maintaining the effective charge transport even with thick electrodes,which has proven to be efficient to overcome the limitations.3D structures have also been demonstrated excellent structural stability to withstand strong strains and stresses generated during charge/discharge cycle.3D printing,which can fabricate various delicate and complex structural designs,thus offering brand-new opportunities for the rational design and facile construction of next-generation EESDs.The recent developments in 3D printing of next-generation EESDs with high performance are reviewed.Advanced/multiscale electrode structures,such as hierarchically porous structure that can be constructed via high-resolution 3D printing or with post-treatment,are further emphasized.The ability of current 3D printing techniques to fulfill multimaterial printing to fulfill simple packaging will be covered.
基金supported by grants from the National Natural Science Foundation of China(52205363)Fundamental Research Funds for the Central Universities(2019kfyRCPY044 and 2021GCRC002)+3 种基金Program for HUST Academic Frontier Youth Team(2018QYTD04)Program for Innovative Research Team of the Ministry of Education(IRT1244)Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone Shenzhen Park Project:HZQB-KCZYB-2020030the Guangdong Provincial Department of Science and Technology(Key-Area Research and Development Program of Guangdong Province)under the Grant 2020B090923002。
文摘Piezoelectricity in native bones has been well recognized as the key factor in bone regeneration.Thus,bio-piezoelectric materials have gained substantial attention in repairing damaged bone by mimicking the tissue’s electrical microenvironment(EM).However,traditional manufacturing strategies still encounter limitations in creating personalized bio-piezoelectric scaffolds,hindering their clinical applications.Three-dimensional(3D)/four-dimensional(4D)printing technology based on the principle of layer-by-layer forming and stacking of discrete materials has demonstrated outstanding advantages in fabricating bio-piezoelectric scaffolds in a more complex-shaped structure.Notably,4D printing functionality-shifting bio-piezoelectric scaffolds can provide a time-dependent programmable tissue EM in response to external stimuli for bone regeneration.In this review,we first summarize the physicochemical properties of commonly used bio-piezoelectric materials(including polymers,ceramics,and their composites)and representative biological findings for bone regeneration.Then,we discuss the latest research advances in the 3D printing of bio-piezoelectric scaffolds in terms of feedstock selection,printing process,induction strategies,and potential applications.Besides,some related challenges such as feedstock scalability,printing resolution,stress-to-polarization conversion efficiency,and non-invasive induction ability after implantation have been put forward.Finally,we highlight the potential of shape/property/functionality-shifting smart 4D bio-piezoelectric scaffolds in bone tissue engineering(BTE).Taken together,this review emphasizes the appealing utility of 3D/4D printed biological piezoelectric scaffolds as next-generation BTE implants.
基金Supported by the National Natural Science Foundation of China under Grant No.69890235the Research Fund for the Doctoral Program of Higher Education of China.
文摘The rare-earth ions(Yb^(3+),Tm^(3+))and Li^(+),Bi^(3+)ions doped GdCa_(4)O(BO_(3))_(3) crystals were grown using the Czochralski pulling method.The second-harmonic-generation conversion efficiencies of the GdCOB:Yb and GdCOB:Tm crystals are 31.3%and 33.3%,respectively,while the undoped GdCOB crystal is 27.9%.The conversion efficiencies of Yb^(3+),Tm^(3+)doped GdCOB are improved by 12%and 19%,respectively,compared to that of the undoped one.The conversion efficiencies of Li^(+),Bi^(3+)doped GdCOB crystals are 33%and 38.3%,which are improved by 15%and 37%as compared to that of the undoped crystal.The results are discussed using the anion group theory.
基金supports from National Natural Science Foundation of China(Grant No.62205117,52275429)National Key Research and Development Program of China(Grant No.2021YFF0502700)+2 种基金Young Elite Scientists Sponsorship Program by CAST(Grant No.2022QNRC001)West Light Foundation of the Chinese Academy of Sciences(Grant No.xbzg-zdsys-202206)Hubei Natural Science Foundation Innovative Research Group Project(2024AFA025).
文摘The popularity of deep learning has boosted computer-generated holography(CGH)as a vibrant research field,particularly physics-driven unsupervised learning.Nevertheless,present unsupervised CGH models have not yet explored the potential of generating full-color 3D holograms through a unified framework.In this study,we propose a lightweight multiwavelength network model capable of high-fidelity and efficient full-color hologram generation in both 2D and 3D display,called IncepHoloRGB.The high-speed simultaneous generation of RGB holograms at 191 frames per second(FPS)is based on Inception sampling blocks and multi-wavelength propagation module integrated with depth-traced superimposition,achieving an average structural similarity(SSIM)of 0.88 and peak signal-to-noise ratio(PSNR)of 29.00 on the DIV2K test set in reconstruction.Full-color reconstruction of numerical simulations and optical experiments shows that IncepHoloRGB is versatile to diverse scenarios and can obtain authentic full-color holographic 3D display within a unified network model,paving the way for applications towards real-time dynamic naked-eye 3D display,virtual and augmented reality(VR/AR)systems.
